Reassessment of the unique mode of binding between angiotensin II type 1 receptor and their blockers

Sacubitril/valsartan in patients with symptomatic chronic heart failure with reduced ejection fraction

Background:

Sacubitril/valsartan is a combination drug therapy for heart failure (HF) patients that has been shown to reduce mortality and hospitalisation.

Aims:

To explore clinically relevant real-life patient data regarding prescribing of sacubitril/valsartan for HF patients in three hospitals, in accordance with national guidelines.

Methods:

A retrospective multicentre study in three large UK hospital Trusts based in the West Midlands.

Findings:

A total of 118 symptomatic chronic HF patients with reduced ejection fraction were included in the study. A high proportion of prescribers adhered to NICE guidelines for treatment with sacubitril/valsartan; 99% of patients had a New York Heart Association functional class of at least II; 82% had a left ventricle ejection fraction of under 35%; 100% received an angiotensin-converting enzyme inhibitor or angiotensin II receptor blocker before commencing sacubitril/valsartan. The mean age of men and women at the three hospitals was 65 and 59 years, respectively. The proportion of men prescribed sacubitril/valsartan was greater than women: 80% compared to 20%, respectively. The majority of patients on the therapy were white British (65%). Total prescribing of sacubitril/valsartan at the three hospitals was 295 patients, lower than expected.

Conclusion:

The prescribing of sacubitril/valsartan at the Trusts generally adhered to NICE guidance; however, the prescribing rate was lower than expected compared with the NICE resource tool. Further investigations into the safety and scope of application of sacubitril/valsartan are required to match the prescribing of sacubitril/valsartan with eligible patients who could benefit from the medication.

Divergent Spatiotemporal Interaction of Angiotensin Receptor Blocking Drugs with Angiotensin Type 1 Receptor

Crystal structures of the human angiotensin II type 1 receptor (AT₁R) complex with the antihypertensive agent ZD7155 (PDB id: 4YAY ) and the blood pressure medication Benicar (PDB id: 4ZUD ) showed that binding poses of both antagonists are similar. This finding implies that clinically used angiotensin receptor blocking (ARB) drugs may interact in a similar fashion. However, clinically observed differences in pharmacological and therapeutic efficacies of ARBs lead to the question of whether the dynamic interactions of AT₁R with ARBs vary. To address this, we performed induced-fit docking (IFD) of eight clinically used ARBs to AT₁R followed by 200 ns molecular dynamic (MD) simulation. The experimental K_i values for ARBs correlated remarkably well with calculated free energy with R² = 0.95 and 0.70 for AT₁R-ARB models generated respectively by IFD and MD simulation. The eight ARB-AT₁R complexes share a common set of binding residues. In addition, MD simulation results validated by mutagenesis data discovered distinctive spatiotemporal interactions that display unique bonding between an individual ARB and AT₁R. These findings provide a reasonably broader picture reconciling the structure-based observations with clinical studies reporting efficacy variations for ARBs. The unique differences unraveled for ARBs in this study will be useful for structure-based design of the next generation of more potent and selective ARBs.

Current topics in angiotensin II type 1 receptor research: Focus on inverse agonism, receptor dimerization and biased agonism

Although the octapeptide hormone angiotensin II (Ang II) regulates cardiovascular and renal homeostasis through the Ang II type 1 receptor (AT1R), overstimulation of AT1R causes various human diseases, such as hypertension and cardiac hypertrophy. Therefore, AT1R blockers (ARBs) have been widely used as therapeutic drugs for these diseases. Recent basic research and clinical studies have resulted in the discovery of interesting phenomena associated with AT1R function. For example, ligand-independent activation of AT1R by mechanical stress and agonistic autoantibodies, as well as via receptor mutations, has been shown to decrease the inverse agonistic efficacy of ARBs, though the molecular mechanisms of such phenomena had remained elusive until recently. Furthermore, although AT1R is believed to exist as a monomer, recent studies have demonstrated that AT1R can homodimerize and heterodimerize with other G-protein coupled receptors (GPCR), altering the receptor signaling properties. Therefore, formation of both AT1R homodimers and AT1R-GPCR heterodimer may be involved in the pathogenesis of human disease states, such as atherosclerosis and preeclampsia. Finally, biased AT1R ligands that can preferentially activate the β-arrestin-mediated signaling pathway have been discovered. Such β-arrestin-biased AT1R ligands may be better therapeutic drugs for cardiovascular diseases. New findings on AT1R described herein could provide a conceptual framework for application of ARBs in the treatment of diseases, as well as for novel drug development. Since AT1R is an extensively studied member of the GPCR superfamily encoded in the human genome, this review is relevant for understanding the functions of other members of this superfamily.

Non-HLA antibodies against endothelial targets bridging allo- and autoimmunity

Detrimental actions of donor-specific antibodies (DSAs) directed against both major histocompatibility antigens (human leukocyte antigen [HLA]) and specific non-HLA antigens expressed on the allograft endothelium are a flourishing research area in kidney transplantation. Newly developed solid-phase assays enabling detection of functional non-HLA antibodies targeting G protein-coupled receptors such as angiotensin type I receptor and endothelin type A receptor were instrumental in providing long-awaited confirmation of their broad clinical relevance. Numerous recent clinical studies implicate angiotensin type I receptor and endothelin type A receptor antibodies as prognostic biomarkers for earlier occurrence and severity of acute and chronic immunologic complications in solid organ transplantation, stem cell transplantation, and systemic autoimmune vascular disease. Angiotensin type 1 receptor and endothelin type A receptor antibodies exert their pathophysiologic effects alone and in synergy with HLA-DSA. Recently identified antiperlecan antibodies are also implicated in accelerated allograft vascular pathology. In parallel, protein array technology platforms enabled recognition of new endothelial surface antigens implicated in endothelial cell activation. Upon target antigen recognition, non-HLA antibodies act as powerful inducers of phenotypic perturbations in endothelial cells via activation of distinct intracellular cell-signaling cascades. Comprehensive diagnostic assessment strategies focusing on both HLA-DSA and non-HLA antibody responses could substantially improve immunologic risk stratification before transplantation, help to better define subphenotypes of antibody-mediated rejection, and lead to timely initiation of targeted therapies. Better understanding of similarities and dissimilarities in HLA-DSA and distinct non-HLA antibody-related mechanisms of endothelial damage should facilitate discovery of common downstream signaling targets and pave the way for the development of endothelium-centered therapeutic strategies to accompany intensified immunosuppression and/or mechanical removal of antibodies.

A fluorimetric binding assay for angiotensin II and kinin receptors

Angiotensin II (AngII) and kinins (bradykinin (BK) and des-Arg9-bradykinin (DBK)), are potent agents involved in the maintenance of blood pressure and several biological activities, and their better understanding is important to produce new drugs aimed to control arterial blood pressure. Previous studies on ligand-receptor binding have been based on radioactive methods, which led us to study a new method based on the fluorimetric method. A lanthanide attached to the N-terminal segment of the peptide (AngII, BK and DBK), which produces a time-resolved-fluorescent ligand, was used in a binding test with CHO cells expressing the AT1, AT2, B1 or B2 receptors in comparison with the same cell line tested with the radioactive ligand. Our findings indicated that the non-radioactive method provided a comparable result for the angiotensin receptors. On the other hand, the kinin receptors showed a slight reduction in the binding affinity, probably due to the linkage at the N-terminal segment and/or to the lower biological stability associated to the high temperature (37°C) used for the fluorimetric method, while the radioactive one was at 4°C. We can conclude that a time-resolved fluorescence assay would provide a sensitive method as an alternative tool for receptor studies.

Structural Basis for Ligand Recognition and Functional Selectivity at Angiotensin Receptor

Angiotensin II type 1 receptor (AT1R) is the primary blood pressure regulator. AT1R blockers (ARBs) have been widely used in clinical settings as anti-hypertensive drugs and share a similar chemical scaffold, although even minor variations can lead to distinct therapeutic efficacies toward cardiovascular etiologies. The structural basis for AT1R modulation by different peptide and non-peptide ligands has remained elusive. Here, we report the crystal structure of the human AT1R in complex with an inverse agonist olmesartan (Benicar(TM)), a highly potent anti-hypertensive drug. Olmesartan is anchored to the receptor primarily by the residues Tyr-35(1.39), Trp-84(2.60), and Arg-167(ECL2), similar to the antagonist ZD7155, corroborating a common binding mode of different ARBs. Using docking simulations and site-directed mutagenesis, we identified specific interactions between AT1R and different ARBs, including olmesartan derivatives with inverse agonist, neutral antagonist, or agonist activities. We further observed that the mutation N111(3.35)A in the putative sodium-binding site affects binding of the endogenous peptide agonist angiotensin II but not the β-arrestin-biased peptide TRV120027.

Structure-Function Basis of Attenuated Inverse Agonism of Angiotensin II Type 1 Receptor Blockers for Active-State Angiotensin II Type 1 Receptor

Ligand-independent signaling by the angiotensin II type 1 receptor (AT1R) can be activated in clinical settings by mechanical stretch and autoantibodies as well as receptor mutations. Transition of the AT1R to the activated state is known to lower inverse agonistic efficacy of clinically used AT1R blockers (ARBs). The structure-function basis for reduced efficacy of inverse agonists is a fundamental aspect that has been understudied not only in relation to the AT1R but also regarding other homologous receptors. Here, we demonstrate that the active-state transition in the AT1R indeed attenuates an inverse agonistic effect of four biphenyl-tetrazole ARBs through changes in specific ligand-receptor interactions. In the ground state, tight interactions of four ARBs with a set of residues (Ser109(TM3), Phe182(ECL2), Gln257(TM6), Tyr292(TM7), and Asn295(TM7)) results in potent inverse agonism. In the activated state, the ARB-AT1R interactions shift to a different set of residues (Val108(TM3), Ser109(TM3), Ala163(TM4), Phe182(ECL2), Lys199(TM5), Tyr292(TM7), and Asn295(TM7)), resulting in attenuated inverse agonism. Interestingly, V108I, A163T, N295A, and F182A mutations in the activated state of the AT1R shift the functional response to the ARB binding toward agonism, but in the ground state the same mutations cause inverse agonism. Our data show that the second extracellular loop is an important regulator of the functional states of the AT1R. Our findings suggest that the quest for discovering novel ARBs, and improving current ARBs, fundamentally depends on the knowledge of the unique sets of residues that mediate inverse agonistic potency in the two states of the AT1R.

Structure of the Angiotensin receptor revealed by serial femtosecond crystallography

Angiotensin II type 1 receptor (AT(1)R) is a G protein-coupled receptor that serves as a primary regulator for blood pressure maintenance. Although several anti-hypertensive drugs have been developed as AT(1)R blockers (ARBs), the structural basis for AT(1)R ligand-binding and regulation has remained elusive, mostly due to the difficulties of growing high-quality crystals for structure determination using synchrotron radiation. By applying the recently developed method of serial femtosecond crystallography at an X-ray free-electron laser, we successfully determined the room-temperature crystal structure of the human AT(1)R in complex with its selective antagonist ZD7155 at 2.9-Å resolution. The AT(1)R-ZD7155 complex structure revealed key structural features of AT(1)R and critical interactions for ZD7155 binding. Docking simulations of the clinically used ARBs into the AT(1)R structure further elucidated both the common and distinct binding modes for these anti-hypertensive drugs. Our results thereby provide fundamental insights into AT(1)R structure-function relationship and structure-based drug design.

Comparison of aldosterone synthesis in adrenal cells, effect of various AT1 receptor blockers with or without atrial natriuretic peptide

Bifunctional angiotensin II (Ang II) type 1 (AT1) receptor blockers (ARBs) that can block the activation of not only AT1 receptor, but also neprilysin, which metabolizes vasoactive peptides including atrial natriuretic peptide (ANP), are currently being developed. However, the usefulness of the inactivation of ANP in addition to the AT1 receptor with regard to aldosterone (Ald) synthesis is not yet clear. We evaluated the inhibitory effects of various ARBs combined with or without ANP on Ang II-induced adrenal Ald synthesis using a human adrenocortical cell line (NCI-H295R). Ang II increased Ald synthesis in a dose- and time-dependent manner. Ald synthesis induced by Ang II was completely blocked by azilsartan, but not PD123319 (AT2 receptor antagonist). CGP42112 AT2 receptor agonist did not affect Ald synthesis. While most ARBs block Ang II-induced Ald synthesis to different extents, azilsartan and olmesartan have similar blocking effects on Ald synthesis. The different effects of ARBs were particularly observed at 10(-7) and 10(-8 )M. ANP attenuated Ang II-induced Ald synthesis, and ANP-mediated attenuation of Ang II-induced Ald synthesis were blocked by inhibitors of G-protein signaling subtype 4 and protein kinase G. ANP (10(-8) and 10(-7 )M) without ARBs inhibited Ald synthesis, and the combination of ANP (10(-7 )M) and ARB (10(-8 )M) had an additive effect with respect to the inhibition of Ald synthesis. In conclusions, ARBs had differential effects on Ang II-induced Ald synthesis, and ANP may help to block Ald synthesis when the dose of ARB is not sufficient to block its secretion.

Structural determinants for binding, activation, and functional selectivity of the angiotensin AT1 receptor

The renin-angiotensin system (RAS) plays an important role in the pathophysiology of cardiovascular disorders. Pharmacologic interventions targeting the RAS cascade have led to the discovery of renin inhibitors, angiotensin-converting enzyme inhibitors, and AT(1) receptor blockers (ARBs) to treat hypertension and some cardiovascular and renal disorders. Mutagenesis and modeling studies have revealed that differential functional outcomes are the results of multiple active states conformed by the AT(1) receptor upon interaction with angiotensin II (Ang II). The binding of agonist is dependent on both extracellular and intramembrane regions of the receptor molecule, and as a consequence occupies more extensive area of the receptor than a non-peptide antagonist. Both agonist and antagonist bind to the same intramembrane regions to interfere with each other's binding to exhibit competitive, surmountable interaction. The nature of interactions with the amino acids in the receptor is different for each of the ARBs given the small differences in the molecular structure between drugs. AT(1) receptors attain different conformation states after binding various Ang II analogues, resulting in variable responses through activation of multiple signaling pathways. These include both classical and non-classical pathways mediated through growth factor receptor transactivations, and provide cross-communication between downstream signaling molecules. The structural requirements for AT(1) receptors to activate extracellular signal-regulated kinases 1 and 2 through G proteins, or G protein-independently through β-arrestin, are different. We review the structural and functional characteristics of Ang II and its analogs and antagonists, and their interaction with amino acid residues in the AT(1) receptor.