Preparation, characterization and application of magnetic Fe3O4-CS for the adsorption of orange I from aqueous solutions

Enhancing MRI through high loading of superparamagnetic nanogels with high sensitivity to the tumor environment

Tumors pose a significant threat to human health, and their occurrence and fatality rates are on the rise each year. Accurate tumor diagnosis is crucial in preventing untimely treatment and late-stage metastasis, thereby reducing mortality. To address this, we have developed a novel type of hybrid nanogel called γ-Fe2O3@PNIPAM/PAm/CTS, which contains iron oxide nanoparticles and poly(N-isopropyl acrylamide)/polyacrylamide/chitosan. The rationale for this study relies on the concept that thermosensitive PNIPAM has the ability to contract when exposed to elevated temperature conditions found within tumors. This contraction leads to a dense clustering of the high-loading γ-Fe2O3 nanoparticles within the nanogel, thus greatly enhancing the capabilities of MRI. Additionally, the amino groups in chitosan on the particle surface can be converted into ammonium salts under mildly acidic conditions, allowing for an increase in the charge of the nanogel specifically at the slightly acidic tumor site. Consequently, it promotes the phagocytosis of tumor cells and effectively enhances the accumulation and retention of nanogels at the tumor site. The synthesis of the hybrid nanogels involves a surfactant-free emulsion copolymerization process, where vinyl-modified γ-Fe2O3 superparamagnetic nanoparticles are copolymerized with the monomers in the presence of chitosan. We have optimized various reaction parameters to achieve a high loading content of the superparamagnetic nanoparticles, reaching up to 60%. The achieved r 2 value of 517.74 mM-1 S-1 significantly surpasses that of the clinical imaging contrast agent Resovist (approximately 151 mM-1 S-1). To assess the performance of these magnetic nanogels, we conducted experiments using Cal27 oral tumors and 4T1 breast tumors in animal models. The nanogels exhibited temperature- and pH-sensitivity, enabling magnetic targeting and enhancing diagnosis through MRI. The results demonstrated the potential of these hybrid nanogels as contrast agents for magnetic targeting in biomedical applications.

Functionalization of rice husk-derived mesoporous silica nanoparticles for targeted and imaging in cancer drug delivery

BACKGROUND

Rice, a pivotal global food staple, annually accumulates vast amounts of rice husks, resulting in substantial environmental impact. Exploiting the high silica content in rice husk, our research aimed to recycle this agricultural byproduct to synthesize mesoporous silica nanoparticles (rMSNs). These nanoparticles were further modified to evaluate their potential as effective carriers for cancer drug delivery.

RESULTS

rMSNs showed high biocompatibility, large surface area and porous structure as MSNs, making them excellent drug carriers. Further modifications were applied to rMSNs, such as the incorporation of the lanthanides europium and gadolinium into rMSNs, making them fluorescent and magnetic for detection and tracking using confocal fluorescence microscopy and magnetic resonance imaging. Additionally, folic acid and aptamer AS1411 were conjugated with rMSNs to enhance the targeting of cancer cells. HeLa cells exhibited higher uptake of camptothecin (CPT)-loaded rMSNs compared to normal fibroblast cells (L929). The linkage of disulfide bonds to rMSNs also allowed CPT to be carried by rMSNs and released intracellularly in the presence of the abundant reducing agent glutathione. The validation of rMSNs in vitro and in vivo proved their practical feasibility.

CONCLUSION

Our findings indicate that low-cost rMSNs, derived from recycled agricultural waste, can replace highly valuable MSNs. Functionalized rMSNs exhibit promising capabilities in transporting clinical drugs to specific aberrant tissues and offering dual-targeting and dual-imaging functionalities for enhanced cancer therapy. © 2023 Society of Chemical Industry.

Facile synthesis of biopolymer decorated magnetic coreshells for enhanced removal of xenobiotic azo dyes through experimental modelling

Since contamination of xenobiotics in water bodies has become a global issue, their removal is gaining ample attention lately. In the present study, nZVI was synthesized using chitosan for removal of two such xenobitic dyes, Bromocresol green and (BCG) and Brilliant blue (BB), which have high prevalence in freshwater and wastewater matrices. nZVI functionalization prevents nanoparticle aggregation and oxidation, enhancing the removal of BCG and BB with an efficiency of 84.96% and 86.21%, respectively. XRD, FESEM, EDS, and FTIR have been employed to investigate the morphology, elemental composition, and functional groups of chitosan-modified nanoscale-zerovalent iron (CS@nZVI). RSM-CCD model was utilized to assess the combined effect of five independent variables and determine the best condition for maximum dye removal. The interactions between adsorbent dose (2-4 mg), pH (4-8), time (20-40 min), temperature (35-65 0C), and initial dye concentration (40-60 mg/L) was modeled to study the response, i.e., dye removal percentage. The reaction fitted well with Langmuir isotherm and pseudo-first-order kinetics, with a maximum qe value of 426.97 and 452.4 mg/g for BCG and BB, respectively. Thermodynamic analysis revealed the adsorption was spontaneous, and endothermic in nature. Moreover, CS@nZVI could be used up to five cycles of dye removal with remarkable potential for real water samples.

Application of 3D magnetic nanocomposites: MXene-supported Fe3O4@CS nanospheres for highly efficient adsorption and separation of dyes

Due to the presence of several hydroxyl and amino groups on the surface, chitosan (CS) has been reported to be a potential candidate to solve the pollution caused by dyes in different industrial wastewater. However, it is associated with the recycling issues. Nano-Fe₃O₄ has the advantages of easy magnetic separation and surface functionalization, which can improve the efficiency as well as selectivity of separation. However, its tendency for agglomeration can reduce the adsorption capacity. MXene can provide suitable support for both CS and Fe₃O₄ to construct new MXene@Fe₃O₄@CS composites. In this study, MXene@Fe₃O₄@CSmagnetic nanosphere was synthesized by ultrasonic self-assembly to remove Congo red (CR). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier Transform Infrared (FT-IR) spectroscopy were employed to characterize the nanocomposites. According to the batch experiments, the adsorption kinetics were found to predominantly follow quasi-secondary rate kinetics. The adsorption followed Langmuir isotherm model. The adsorption process was found to be endothermic, entropy-driven, and thermodynamically spontaneous process. The adsorption capacity for CR was estimated as 620.22 mg·g^-1.

Graphene Oxide/Fe3O4/Chitosan−Coated Nonwoven Polyester Fabric Extracted from Disposable Face Mask for Enhanced Efficiency of Organic Dye Adsorption

Owing to the COVID-19 pandemic, huge amounts of disposable face masks have been manufactured and used, and these discarded face masks have to be treated. In this study, we propose a simple approach for reusing the nonwoven polyester fabric (NWPF) from disposable face masks. In this approach, NWPF is utilized as a supporter for coating of a layer of graphene oxide/Fe3O4/chitosan (GFC) to form a GFC/NWPF adsorbent at room temperature via a simple spray coating method that does not require any solvent. The specific properties of GFC, NWPF, and the GFC/NWPF adsorbent were analysed via X-ray diffraction, transmission electron microscopy, ultraviolet–visible spectroscopy, vibrating sample magnetometry, and field-emission scanning electron microscopy. Results showed that the presence of NWPF enhanced the adsorption capacity of GFC towards organic dyes. At high concentrations of the organic dyes, the adsorption efficiency of the GFC/NWPF adsorbent to the dyes reached 100% within 24 h. The adsorption capacity ( $q_{\max }$ ) of the GFC/NWPF adsorbent to methylene blue, methyl orange, Congo red, and moderacid red was 54.795, 87.489, 88.573, and 29.010 mg g−1, respectively, which were considerably higher than that of bulk GFC (39.308, 82.304, 52.910, and 21.249 mg g−1, respectively).

Surface Modification of Bentonite with Polymer Brushes and Its Application as an Efficient Adsorbent for the Removal of Hazardous Dye Orange I

Poly(2-(dimethylamino)ethyl methacrylate)-grafted bentonite, marked as Bent-PDMAEMA, was designed and prepared by a surface-initiated atom transfer radical polymerization method for the first time in this study. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA) were applied to characterize the structure of Bent-PDMAEMA, which resulted in the successful synthesis of Bent-PDMAEMA. As a cationic adsorbent, the designed Bent-PDMAEMA was used to remove dye Orange I from wastewater. The adsorption property of Bent-PDMAEMA for Orange I dye was investigated under different experimental conditions, such as solution pH, initial dye concentration, contact time and temperature. Under the optimum conditions, the adsorption amount of Bent-PDMAEMA for Orange I dye could reach 700 mg·g-1, indicating the potential application of Bent-PDMAEMA for anionic dyes in the treatment of wastewater. Moreover, the experimental data fitted well with the Langmuir model. The adsorption process obeyed pseudo-second-order kinetic process mechanism.

Data on the removal of Optilan Blue dye from aqueous media using starch-coated green synthesized magnetite nanoparticles

In this data article, we present supplementary data related to the research article entitled "Starch-coated green synthesized magnetite nanoparticles for removal of textile dye Optilan Blue from aqueous media" Stan et al., 2019. Data interpretations are included in the related research article Stan et al., 2019. The synthesized starch-coated Fe3O4 nanoparticles (ST-coated Fe3O4 NPs) were analyzed by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) to illustrate the shape and surface coating of nanoparticles. Moreover, the Brunauer-Emmett-Teller (BET) technique was used to evidence starch deposition on magnetite nanoparticles. The obtained nanocomposites were used for adsorption of Optilan Blue (OB) in batch conditions and the optimum agitation speed and point of zero charge (pHpzc) were established. After OB adsorption on ST-coated Fe3O4 NPs, the nanocomposites were analyzed by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The stability of starch coated Fe3O4 NPs in the acidic as well as alkaline pH was also evidenced by FTIR spectroscopy. In addition, to test the stability of ST-coated Fe3O4 NPs, leaching experiments were carried out. The experimental data were compared with isotherm and kinetic models in order to determine the most suitable for fitting.

A versatile β-cyclodextrin and polyethyleneimine bi-functionalized magnetic nanoadsorbent for simultaneous capture of methyl orange and Pb(II) from complex wastewater

Ascribing to their significant differences in physicochemical properties, it is extremely challenging to treat complex wastewater containing more than one class of pollutants via one-step treatment. Here, we focused on disposal of complex wastewater bearing organic dye and heavy metal by using adsorptive method. Thus, by combining the advantages of polyethyleneimine (PEI), β-cyclodextrin (β-CD) as well as Fe₃O₄ magnetic nanoparticles, a versatile β-CD and PEI bi-functionalized magnetic nanoadsorbent (Fe₃O₄-PEI/β-CD) with spatially separated sorption sites was successfully constructed for simultaneous capture of methyl orange (MO) and Pb(II) in complex wastewater. In this setting, β-CD cavities and positively charged N-containing groups of PEI were mainly responsible for removal of MO via host-guest inclusion and electrostatic attraction, respectively, and oxygen-bearing groups on the edge of β-CD as well as the free amino moieties in PEI acted as the active sites for Pb(II) uptake. In their individual mono-pollutant system, the adsorption processes can be better described via applying pseudo-second-order kinetic and Langmuir isotherm models. Interestingly, presence of MO in Pb(II)-MO binary system significantly promoted the uptake of Pb(II). But the coexisting Pb(II) had almost no effects on MO uptake. Such results demonstrated that both MO and Pb(II) could be simultaneously and synergistically removed by Fe₃O₄-PEI/β-CD through multiple mechanisms (such as electrostatic attraction, host-guest inclusion, chelating, etc.). Particularly, the excellent regeneration and stability make Fe₃O₄-PEI/β-CD an ideal integrative adsorbent for purification of actual wastewater contaminated by MO and Pb(II). Thus, this study provides some insights into designing a well-performed and easily recyclable adsorbent for simultaneous and synergetic capture of both organic and inorganic contaminants in complex wastewater.

Sulfone-modified chitosan as selective adsorbent for the extraction of toxic Hg(II) metal ions

In this study, a new category of sulfone-modified chitosan derivatives as surface-selective adsorbents for the extraction of toxic Hg(II) metal has been synthesized in good yield. Sulfone-modified chitosan/5–20 based on variable loading of the corresponding phenacyl bromide (5, 10, 15, and 20% with respect to the original weight of the pure chitosan) was synthesized. The β-ketosulfone derivative, namely 1–(4-bromophenyl)-2-(phenylsulfonyl)ethanone, was first prepared by treatment of the corresponding phenacyl bromide with a sufficient amount of sodium benzene sulfinate; its chemical structure was confirmed by spectral analyses, including Fourier transform infrared spectroscopy, 1H-NMR, 13C-NMR, and mass spectrometry. Then, sulfone-modified chitosan/5–20 derivatives were synthesized by the interaction of chitosan with a freshly prepared p-bromo-β-ketosulfone derivative in a mildly acidic aqueous solution using the solution-blending technique. Sulfone-modified chitosan/5–20 derivatives were identified and characterized using common characterization techniques, including Fourier transform infrared spectroscopy, field-emission scanning electron microscope, powder X-ray diffraction, and thermal behaviour. A strong interaction was displayed between chitosan and its corresponding β-ketosulfones in powder X-ray diffraction, which was confirmed by significant 2θ shifts. Sulfone-modified chitosan/5–20 derivatives were detected as catalysts, which efficiently increased the thermal decomposition of pure chitosan. More particularly, the efficiency of sulfone-modified chitosan/5–20 derivatives for Hg(II), Pb(II), Ni(II), Al(III), Sr(II), Cr(III), Fe(III), Zn(II), and Mn(II) detection and adsorption was also investigated using inductively coupled plasma optical emission spectrometry. The sulfone-modified chitosan/5 derivative exhibited the highest adsorption efficiency. The most effective quantitative adsorption onto the sulfone-modified chitosan/5 surface was detected at pH = 2. In addition to that, the adsorption isotherm showed that the adsorption capacity of sulfone-modified chitosan/5 for Hg(II) was 122.47 mg g−1 and that its adsorption isotherm was in agreement with the Langmuir adsorption isotherm.

Corncob as an effective, eco-friendly, and economic biosorbent for removing the azo dye Direct Yellow 27 from aqueous solutions

The corncob is an agricultural waste generated in huge quantities during corn processing. In this paper, we tested the capacity of corncob particles for water purification by removing the azo dye Direct Yellow 27 (DY27) via biosorption. The biosorption process was investigated in terms of the kinetics, equilibria, and thermodynamics. Batch biosorption studies showed that the biosorption performance has strong inverse correlations to the solution pH and the corncob particle size, and it increases quickly with increasing contact time and initial dye concentration. The pseudo-second-order kinetic model provides the best fit to the experimental data, whereas the Redlich-Peterson isotherm model is most suitable for describing the observed equilibrium biosorption. The biosorption process is exothermic, spontaneous, and physisorption in character. Fourier transform infrared (FTIR) spectroscopy and confocal scanning laser microscopy (CSLM) studies suggest that lignocellulose and proteins play key roles in the biosorption of DY27 from aqueous solutions by corncob. Furthermore, after biosorption onto the corncob, the dye can be effectively desorbed using 0.1 M NaOH solution. Therefore, the corncob can be used as a promising biosorbent to remediate DY27-contaminated water and wastewater.

Enhanced Production of κ-Carrageenase and κ-Carrageenan Oligosaccharides through Immobilization of Thalassospira sp. Fjfst-332 with Magnetic Fe3O4-Chitosan Microspheres

In this study, immobilized bacteria (IMB) microsphere was prepared by embedding κ-carrageenase-producing Thalassospira sp. Fjfst-332 (TF332) onto a magnetic Fe₃O₄-chitosan carrier. The performance of Fe₃O₄-chitosan carrier was optimized by comparing its bacteria immobilization capacity at different Fe₃O₄:chitosan ratios and temperatures, while the functions of IMB microspheres were characterized by examining their κ-carrageenase production at different temperatures, pH's, and reuse cycles. At the 1:1 (w:w) Fe₃O₄:chitosan ratio, the Fe₃O₄-chitosan carriers possessed sufficient anchoring capacity for bacterial immobilization without significant compromise of their magnetism for magnetic separation of IMB from culture media. The spectroscopic analysis of IMB microspheres indicated that the immobilization of TF332 might affect the amide groups in chitosan. Compared to free bacteria, IMB can produce κ-carrageenase at higher temperature, wider pH range, and faster rate. More importantly, the κ-carrageenase-producing activity was sustained for at least seven reuse cycles. The major κ-carrageenan degradation products of IMB-derived κ-carrageenase were the oligosaccharides containing two to six monosaccharide units. Overall, this Fe₃O₄-chitosan-TF-332 microsphere has the potential to become a stable and reusable platform for large-scale production of κ-carrageenan oligosaccharides.

Cr-Doped ZnO Nanoparticles: Synthesis, Characterization, Adsorption Property, and Recyclability

In this paper, a mild solvothermal method has been employed to successfully synthesize a series of Cr-doped ZnO nanoparticles (NPs) with different Cr(3+) contents, which is a kind of novel and high-efficiency absorbent for the removal of acid dye methyl orange (MO) from aqueous solution. The as-prepared products were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Brunauer, Emmet, and Teller (BET), and Zeta potential measurements. In accordance with the adsorption capacity of the products, the obtained optimal Cr/Zn molar ratio is 6%. The adsorption process of MO on Cr-doped ZnO was investigated by kinetics, thermodynamics, and isotherm technologies, which, respectively, indicated that the adsorption was fast (adsorption reached equilibrium in 2 h) and followed a pseudo-second-order model, that the adsorption process was spontaneous and endothermic, and that it agreed well with the Langmuir isotherm with a maximum adsorption capacity of 310.56 mg g(-1). Moreover, a reasonable mechanism was proposed to elucidate the reasons for their adsorption behavior. In addition, a simple and low-cost chemical method was developed to separate and recycle ZnO and MO from the used adsorbent, effectively avoiding the secondary pollution. This work can not only describe efficient experimental approaches for obtaining novel adsorbents and recycling them but also offer valuable clues for the preparation and property study of other semiconductor adsorbents.

Development of a novel magnetite–chitosan composite for the removal of fluoride from drinking water: adsorption modeling and optimization

Fe₃O₄–chitosan can be separated both quickly and easily. The magnetization of adsorbents and use of magnetic separation techniques can be an effective way to resolve problems associated with separation and filtration.