Engineering an endothelialized vascular graft: a rational approach to study design in a non-human primate model

Thrombogenicity of biodegradable metals

Biodegradable metals offer a promising means to ameliorate many of the long-term risks associated with vascular devices made of conventional biostable stent metals. While numerous biodegradable metal alloys have been developed and characterized in animal models, knowledge of their blood reactivity and thrombogenicity remains unknown. Metal hemocompatibility is particularly valuable because current generation drug-eluting stents pose a significant long-term thrombosis risk. In this study, four pure metals, widely used as degradable base materials (Fe, Zn, Mg, and Mo), and three alloys commonly used in cardiovascular devices [NiTi, CoCr, and stainless steel (SS)] were evaluated. This work examined how each of these metals activate platelets, coagulation factors, and inflammation using in vitro hemocompatibility assays and a clinically relevant ex vivo non-human primate arteriovenous shunt model. Testing found that while all metals promoted a downstream activation of platelets and coagulation in flowing whole blood, platelet and fibrin attachment to Mg was markedly reduced. Additionally, Fe and Mo trended toward higher platelet attachment and contact pathway activation. Overall, the results suggest that Mg may delay clot initiation, but not eliminate clot formation, indicating the importance of understanding thrombosis in Mg alloys that are currently being developed for clinical use as biodegradable stents.

Pharmacologic targeting of coagulation factors XII and XI by monoclonal antibodies reduces thrombosis in nitinol stents under flow

BACKGROUND

Cardiovascular implantable devices, such as vascular stents, are critical for the treatment of cardiovascular diseases. However, their success is dependent on robust and often long-term antithrombotic therapies. Yet, the current standard-of-care therapies often pose significant bleeding risks to patients. Coagulation factor (F)XI and FXII have emerged as potentially safe and efficacious targets to safely reduce pathologic thrombin generation in medical devices.

OBJECTIVES

To study the efficacy of monoclonal antibody-targeting FXII and FXI of the contact pathway in preventing vascular device-related thrombosis.

METHODS

The effects of inhibition of FXII and FXI using function-blocking monoclonal antibodies were examined in a nonhuman primate model of nitinol stent-related thrombosis under arterial and venous flow conditions.

RESULTS

We found that function-blocking antibodies of FXII and FXI reduced markers of stent-induced thrombosis in vitro and ex vivo. However, FXI inhibition resulted in more effective mitigation of thrombosis markers under varied flow conditions.

CONCLUSION

This work provides further support for the translation of contact pathway of coagulation inhibitors for their adjunctive clinical use with cardiovascular devices.

A bioactive compliant vascular graft modulates macrophage polarization and maintains patency with robust vascular remodeling

Conventional synthetic vascular grafts are associated with significant failure rates due to their mismatched mechanical properties with the native vessel and poor regenerative potential. Though different tissue engineering approaches have been used to improve the biocompatibility of synthetic vascular grafts, it is still crucial to develop a new generation of synthetic grafts that can match the dynamics of native vessel and direct the host response to achieve robust vascular regeneration. The size of pores within implanted biomaterials has shown significant effects on macrophage polarization, which has been further confirmed as necessary for efficient vascular formation and remodeling. Here, we developed biodegradable, autoclavable synthetic vascular grafts from a new polyurethane elastomer and tailored the grafts' interconnected pore sizes to promote macrophage populations with a pro-regenerative phenotype and improve vascular regeneration and patency rate. The synthetic vascular grafts showed similar mechanical properties to native blood vessels, encouraged macrophage populations with varying M2 to M1 phenotypic expression, and maintained patency and vascular regeneration in a one-month rat carotid interposition model and in a four-month rat aortic interposition model. This innovative bioactive synthetic vascular graft holds promise to treat clinical vascular diseases.

•

Small diameter vascular grafts were fabricated from a new elastomeric polyurethane designed for vascular tissue engineering.

•

The grafts combined excellent elasticity, strength, porosity, hemocompatibility, degradability, and biocompatibility.

•

In vivo, grafts maintained patency for four months and supported tissue regeneration resembling the native arterial wall.

•

Pore size was found to influence graft characteristics and efficacy.

Vascular Graft Implantation Using a Bilateral End-to-Side Aortoiliac Preclinical Model

Arterial bypass grafts are a standard preclinical model for evaluating physiology and pathophysiology at graft-material interfaces. Implantations of vascular grafts are commonly done as end-to-end grafts in small animal models. Here we detail bilateral end-to-side aortoiliac graft implantation, which requires open surgery and the creation of vascular anastomoses between the graft material and the infrarenal aorta and iliac artery in a nonhuman primate model. In this model, the aortoiliac graft configuration is created using two 4 mm inner diameter vascular grafts (e.g., ePTFE). After exposure and control of the infrarenal aorta and bilateral common iliac arteries and heparinization, the proximal aortic-graft anastomosis is sewn on the lateral wall of the aorta, and subsequently the distal graft-common iliac anastomosis is sewn on the anterior wall of the common iliac artery with one tube graft. Another tube graft is sewn on the contralateral side in the same manner.

The Effects of Topographic Micropatterning on Endothelial Colony-Forming Cells

Artificial small-diameter vascular grafts remain an unmet need in modern medicine, due to the thrombosis and neointimal hyperplasia that plague currently available synthetic devices. Tissue engineering techniques, including in vitro endothelialization, could offer a solution to this problem. A potential minimally invasive source of patient autologous endothelium is endothelial colony-forming cells (ECFCs), endothelial-like outgrowth products of circulating progenitors. While ECFCs respond to shear stress similar to mature endothelial cells (ECs), their response to luminal topographic micropatterning (TMP), a biomaterial modification with the potential to flow-independently, enhance the attachment, migration, gene expression, and function of mature ECs, remains unstudied. In this study, case-matched carotid endothelial cells (CaECs) and blood-derived ECFCs are statically cultured on polyurethane substrates with micropatterned pitches (pitch = peak to peak distance) ranging from 3-to 14 μm. On all pattern pitches tested, both CaECs and ECFCs showed significant and robust alignment to the angle of the micropatterns. Using a novel cell-by-cell image analysis technique, it was found that actin fibers similarly and significantly aligned to the angle of micropatterned features on all pitches tested. Microtubules analyzed through the same novel approach showed significant alignment on most pitches examined, with a greater variation in fiber angle overall. Interestingly, only CaECs showed significant cellular elongation, and notably to a lower degree than previously seen either in vivo due to flow or in vitro due to spatial growth restriction micropatterning, but consistent with earlier studies of TMP. Neither cell type displayed any significant micropattern-driven changes in the expression of KLF-2 or the downstream adhesion molecules it regulates. These results demonstrate that TMP flow-independently affects ECFC morphology, but that alignment alone is insufficient to drive protective changes in EC and ECFC function.

Evaluation of the Effect of Crosslinking Method of Poly(Vinyl Alcohol) Hydrogels on Thrombogenicity

PURPOSE

Crosslinked poly(vinyl alcohol) (PVA) is a biomaterial that can be used for multiple cardiovascular applications. The success of implanted biomaterials is contingent on the properties of the material. A crucial consideration for blood-contacting devices is their potential to incite thrombus formation, which is dependent on the material surface properties. The goal of this study was to quantify the effect of different crosslinking methods of PVA hydrogels on in vitro thrombogenicity.

METHODS

PVA was manufactured using three different crosslinking methods: 30% sodium trimetaphosphate (STMP), three 24 h freeze-thaw cycles (FT), and 2% glutaraldehyde-crosslinked (GA) to produce STMP-PVA, FT-PVA and GA-PVA, respectively. Expanded polytetrafluoroethylene (ePTFE) was used as a clinical control. As markers of thrombus formation, the degree of coagulation factor (F) XII activation, fibrin formation, and platelet adhesion were measured.

RESULTS

The GA-PVA material increased FXII activation in the presence of cofactors compared to vehicle and increase platelet adhesion compared to other PVA surfaces. The STMP-PVA and FT-PVA materials had equivalent degrees of FXII activation, fibrin formation and platelet adhesion.

CONCLUSION

This work supports crosslinker dependent thrombogenicity of PVA hydrogels and advances our understanding of how the manufacturing of a PVA hydrogel affects its hemocompatibility.

Quantifying Physical Thrombus Characteristics on Cardiovascular Biomaterials Using MicroCT

Hemocompatibility is a critical consideration when designing cardiovascular devices. Methods of assessing hemocompatibility range from in vitro protein adsorption and static platelet attachment to in vivo implantation. A standard preclinical assessment of biomaterial hemocompatibility is ex vivo quantification of thrombosis in a chronic arteriovenous shunt. This technique utilizes flowing blood and quantifies platelet accumulation and fibrin deposition. However, the physical parameters of the thrombus have remained unknown. This study presents the development of a novel method to quantify the 3D physical properties of the thrombus on different biomaterials: expanded polytetrafluoroethylene and a preclinical hydrogel, poly(vinyl alcohol). Tubes of 4-5 mm inner diameter were exposed to non-anticoagulated blood flow for 1 hour and fixed. Due to differences in biomaterial water absorption properties, unique methods, requiring either the thrombus or the lumen to be radiopaque, were developed to quantify average thrombus volume within a graft. The samples were imaged using X-ray microcomputed tomography (microCT). The methodologies were strongly and significantly correlated to caliper-measured graft dimensions (R2 = 0.994, p < 0.0001). The physical characteristics of the thrombi were well correlated to platelet and fibrin deposition. MicroCT scanning and advanced image analyses were successfully applied to quantitatively measure 3D physical parameters of thrombi on cardiovascular biomaterials under flow.

Substrate-enzyme affinity-based surface modification strategy for endothelial cell-specific binding under shear stress

Establishing an endothelial cell (EC) monolayer on top of the blood contacting surface of grafts is considered to be a promising approach for creating a hemocompatible surface. Here we utilized the high affinity interactions between the EC plasma membrane expressed enzyme called endothelin converting enzyme-1 (ECE-1) and its corresponding substrate big Endothelin-1 (bigET-1) to engineer an EC-specific binding surface. Since enzymatic cleavage of substrates require physical interaction between the enzyme and its corresponding substrate, it was hypothesized that a surface with chemically immobilized synthetic bigET-1 will preferentially attract ECs over other types of cells found in vascular system such as vascular smooth muscle cells (VSMCs). First, the expression of ECE-1 was significantly higher in ECs, and ECs processed synthetic bigET-1 to produce ET-1 in a cell number-dependent manner. Such interaction between ECs and synthetic bigET-1 was also detectible in blood. Next, vinyl-terminated self-assembled monolayers (SAMs) were established, oxidized and activated on a glass substrate as a model to immobilize synthetic bigET-1 via amide bonds. The ECs cultured on the synthetic bigET-1-immobilized surface processed larger amount of synthetic bigET-1 to produce ET-1 compared to VSMCs (102.9±5.13 vs. 9.75±0.74 pg/ml). The number of ECs bound to the synthetic bigET-1-immobilized surface during 1 h of shearing (5dyne/cm2) was approximately 3-fold higher than that of VSMCs (46.25±12.61 vs. 15.25±3.69 cells/100×HPF). EC-specific binding of synthetic bigET-1-immobilized surface over a surface modified with collagen, a common substance for cell adhesion, was also observed. The present study demonstrated that using the substrate-enzyme affinity (SEA) of cell type-specific enzyme and its corresponding substrate can be an effective method to engineer a surface preferentially binds specific type of cells. This novel strategy might open a new route toward rapid endothelialization under dynamic conditions supporting the long-term patency of cardiovascular implants.

Static spatial growth restriction micropatterning of endothelial colony forming cells influences their morphology and gene expression

BACKGROUND

Endothelialization of small diameter synthetic vascular grafts is a potential solution to the thrombosis and intimal hyperplasia that plague current devices. Endothelial colony forming cells, which are blood-derived and similar to mature endothelial cells, are a potential cell source. Anisotropic spatial growth restriction micropatterning has been previously shown to affect the morphology and function of mature endothelial cells in a manner similar to unidirectional fluid shear stress. To date, endothelial colony forming cells have not been successfully micropatterned. This study addresses the hypothesis that micropatterning of endothelial colony forming cells will induce morphological elongation, cytoskeletal alignment, and changes in immunogenic and thrombogenic-related gene expression.

METHODS

Spatially growth restrictive test surfaces with 25 μm-wide lanes alternating between collagen-I and a blocking polymer were created using microfluidics. Case-matched endothelial colony forming cells and control mature carotid endothelial cells were statically cultured on either micropatterned or non-patterned surfaces. Cell elongation was quantified using shape index. Using confocal microscopy, cytoskeletal alignment was visualized and density and apoptotic rate were determined. Gene expression was measured using quantitative PCR to measure KLF-2, eNOS, VCAM-1, and vWF.

RESULTS

Endothelial colony forming cells were successfully micropatterned for up to 50 hours. Micropatterned cells displayed elongation and actin alignment. Micropatterning increased the packing densities of both cell types, but did not affect apoptotic rate, which was lower in endothelial colony forming cells. KLF-2 gene expression was increased in micropatterned relative to non-patterned endothelial colony forming cells after 50 hours. No significant differences were seen in the other genes tested.

CONCLUSIONS

Endothelial colony forming cells can be durably micropatterned using spatial growth restriction. Micropatterning has a significant effect on the gross and subcellular morphologies of both cell types. Further study is required to fully understand the effect of micropatterning on endothelial colony forming cell gene expression.

Luminal Plasma Treatment for Small Diameter Polyvinyl Alcohol Tubular Scaffolds

Plasma-based surface modification is recognized as an effective way to activate biomaterial surfaces, and modulate their interactions with cells, extracellular matrix proteins, and other materials. However, treatment of a luminal surface of a tubular scaffold remains non-trivial to perform in small diameter tubes. Polyvinyl alcohol (PVA) hydrogel, which has been widely used for medical applications, lacks functional groups to mediate cell attachment. This poses an issue for vascular applications, as endothelialization in a vascular graft lumen is crucial to maintain long term graft patency. In this study, a Radio Frequency Glow Discharges (RFGD) treatment in the presence of NH₃ was used to modify the luminal surface of 3-mm diameter dehydrated PVA vascular grafts. The grafted nitrogen containing functional groups demonstrated stability, and in vitro endothelialization was successfully maintained for at least 30 days. The plasma-modified PVA displayed a higher percentage of carbonyl groups over the untreated PVA control. Plasma treatment on PVA patterned with microtopographies was also studied, with only the concave microlenses topography demonstrating a significant increase in platelet adhesion. Thus, the study has shown the possibility of modifying a small diameter hydrogel tubular scaffold with the RFGD plasma treatment technique and demonstrated stability in ambient storage conditions for up to 30 days.

Experimental Studies for Small Diameter Grafts in an In Vivo Sheep Model-Techniques and Pitfalls

BACKGROUND

 Scientific attempts to create the "ideal" small diameter vascular graft have been compared with the "search of the holy grail." Prosthetic material as expanded polytetrafluoroethylene or Dacron shows acceptable patency rates to large caliber vessels, while small diameter (< 6 mm) prosthetic conduits present unacceptably poor patency rates. Vascular tissue engineering represents a promising option to address this problem.

MATERIAL AND METHODS

 Thirty-two female Texel-sheep aged 6 months to 2 years underwent surgical common carotid artery (CCA) interposition using different tissue-engineered vascular substitutes. Explantation of the grafts was performed 12 (n = 12) and 36 (n = 20) weeks after surgery. Ultrasound was performed on postoperative day 1 and thereafter every 4 weeks to evaluate the graft patency.

RESULTS

 The average length of implanted substitutes was 10.3 ± 2.2 cm. Anesthesia and surgical procedure could be performed without major surgical complications in all cases.The grafts showed a systolic blood flow velocity (BFV) of 28.24 ± 13.5 cm/s, a diastolic BFV of 9.25 ± 4.53 cm/s, and a mean BFV of 17.85 ± 9.25 cm/s. Native vessels did not differ relevantly in hemodynamic measurements (systolic: 29.77 cm/s; diastolic: 7.99 cm/s ±  5.35; mean 15.87 ± 10.75). There was no incidence of neurologic complications or subsequent postoperative occlusion. Perioperative morbidity was low and implantation of conduits was generally well tolerated.

CONCLUSION

 This article aims to give a precise overview of in vivo experiments in sheep for the evaluation of small diameter vascular grafts performing CCA interposition, especially with regard to pitfalls and possible perioperative complications and to discuss advantages and disadvantages of this approach.

Improving Surgical Methods for Studying Vascular Grafts in Animal Models

While clinical vascular grafting uses an end-to-side surgical method, researchers primarily use end-to-end implant techniques in preclinical models. This may be due in part to the limitations of using small animal models in research. The work presented here provides support and evidence for the improvement of vascular graft implant techniques by demonstrating the successful implantation of experimental grafts into both large and small animal models. Specifically, models of aortoiliac baboon (Papio anubis) bypass and common carotid rabbit (Oryctolagus cuniculus) bypass were used to test vascular grafts for thrombosis and vascular healing after 1 month using an end-to-side anastomosis grafting procedure. Patency was evaluated with ultrasound or histological techniques, and neointimal growth was quantified with histology. In the development of this procedure for small animals, both an end-to-end/end-to-side and an end-to-side/end-to-side configuration were tested in rabbits. One hundred percent of rabbit implants (2/2) with an end-to-end/end-to-side configuration were patent at explant. However, with the end-to-side/end-to-side configuration, 66% (6/9) of rabbit implants and 93% (13/14) of baboon implants remained patent at 1 month, suggesting the importance of replicating the end-to-side method for testing vascular grafts for clinical use. This study describes feasible preclinical surgical procedures, which simulate clinical vascular bypass grafts even in small animals. Widespread implementation of these end-to-side surgical techniques in these or other animals should improve the quality of experimental, preclinical testing and ultimately increase the likelihood of translating new vascular graft technologies into clinical applications.

Concise Review: Patency of Small-Diameter Tissue-Engineered Vascular Grafts: A Meta-Analysis of Preclinical Trials

Several patient groups undergoing small‐diameter (<6 mm) vessel bypass surgery have limited autologous vessels for use as grafts. Tissue‐engineered vascular grafts (TEVG) have been suggested as an alternative, but the ideal TEVG remains to be generated, and a systematic overview and meta‐analysis of clinically relevant studies is lacking. We systematically searched PubMed and Embase databases for (pre)clinical trials and identified three clinical and 68 preclinical trials ([>rabbit]; 873 TEVGs) meeting the inclusion criteria. Preclinical trials represented low to medium risk of bias, and binary logistic regression revealed that patency was significantly affected by recellularization, TEVG length, TEVG diameter, surface modification, and preconditioning. In contrast, scaffold types were less important. The patency was 63.5%, 89%, and 100% for TEVGs with a median diameter of 3 mm, 4 mm, and 5 mm, respectively. In the group of recellularized TEVGs, patency was not improved by using smooth muscle cells in addition to endothelial cells nor affected by the endothelial origin, but seems to benefit from a long‐term (46–240 hours) recellularization time. Finally, data showed that median TEVG length (5 cm) and median follow‐up (56 days) used in preclinical settings are relatively inadequate for direct clinical translation. In conclusion, our data imply that future studies should consider a TEVG design that at least includes endothelial recellularization and bioreactor preconditioning, and we suggest that more standard guidelines for testing and reporting TEVGs in large animals should be considered to enable interstudy comparisons and favor a robust and reproducible outcome as well as clinical translation.

Biomimetic modification of poly(vinyl alcohol): Encouraging endothelialization and preventing thrombosis with antiplatelet monotherapy

Poly(vinyl alcohol) (PVA) has shown promise as a biomaterial for cardiovascular application. However, its antifouling properties prevent in vivo endothelialization. This work examined the endothelialization and thrombogenicity of modified PVA with different concentrations of proteins and adhesion peptides: collagen, laminin, fibronectin, GFPGER, YIGSR, and cRGD. Material surface properties were quantified, and the endothelialization potential was determined with human endothelial colony forming cells. Additionally, platelet attachment was assessed in vitro with human platelet rich plasma, and promising samples were tested in an ex vivo shunt model. This well-established arteriovenous shunt model was used with and without clinically-relevant antiplatelet therapies, specifically acetylsalicylic acid (ASA) with and without clopidogrel to examine the minimum necessary treatment to prevent thrombosis. Collagen, laminin, and GFPGER biomolecules increased endothelialization, with GFPGER showing the greatest effect at the lowest concentrations. GFPGER-PVA tubes tested under whole blood did exhibit an increase in platelet (but not fibrin) attachment compared to plain PVA and clinical controls. However, application of ASA monotherapy reduced the thrombogenicity of GFPGER-PVA below the clinical control with the ASA. This work is significant in developing cardiovascular biomaterials-increasing endothelialization potential while reducing bleeding side effects by using an antiplatelet monotherapy, typical of clinical patients. STATEMENT OF SIGNIFICANCE: We modified the endothelialization potential of synthetic, hydrogel vascular grafts with proteins and peptides of the vascular tissue matrix. Cell attachment was dramatically increased with the GFPGER peptide, and while some additional platelet attachment was seen under flow with whole blood, this was completely knocked down using clinical antiplatelet monotherapy. This indicates that long-term patency of this biomaterial could be improved without the associated bleeding risk of multiple platelet therapies.

Reactive Ion Plasma Modification of Poly(Vinyl-Alcohol) Increases Primary Endothelial Cell Affinity and Reduces Thrombogenicity

Bulk material properties and luminal surface interaction with blood determine the clinical viability of vascular grafts, and reducing intimal hyperplasia is necessary to improve their long-term patency. Here, the authors report that the surface of a biocompatible hydrogel material, poly(vinyl alcohol) (PVA) can be altered by exposing it to reactive ion plasma (RIP) in order to increase primary endothelial cell attachment. The power and the carrier gas of the RIP treatment are varied and the resultant surface nitrogen, water contact angle, as well as the ability of the RIP-treated surfaces to support primary endothelial colony forming cells is characterized. Additionally, in a clinically relevant shunt model, the amounts of platelet and fibrin attachment to the surface were quantified during exposure to non-anticoagulated blood. Treatments with all carrier gases resulted in an increase in the surface nitrogen. Treating PVA with O2 , N2 , and Ar RIP increased affinity to primary endothelial colony forming cells. The RIP treatments did not increase the thrombogenicity compared to untreated PVA and had significantly less platelet and fibrin attachment compared to the current clinical standard of expanded polytetrafluoroethylene (ePTFE). These findings indicate that RIP-treatment of PVA could lead to increased patency in synthetic vascular grafts.

The neuropeptide galanin promotes an anti-thrombotic phenotype on endocardial endothelial cells from heart failure patients

Thromboembolic complications are a significant cause of mortality and re-hospitalization in heart failure (HF) patients. One source of thrombi is the ventricular endocardial surface that becomes increasingly pro-thrombotic as HF progresses. Anticoagulation comes with bleeding risks so identifying therapeutic agents for improving cardiac endothelial health are of critical clinical importance. Endocardial endothelial cells are closely apposed to cardiac sympathetic nerves. In HF, cardiac sympathetic nerves are dysregulated and promote disease progression. Whether endocardial endothelial health and function is impacted by sympathetic dysregulation in HF is unknown. Also unexplored is the impact of neuropeptides, such as galanin and neuropeptide Y (NPY), co-released from sympathetic nerve terminals, on endothelial health. In this study we examined the effect of sympathetic nerve-released neurotransmitters and neuropeptides on the procoagulant phenotype of cultured human endocardial endothelial cells from HF patients. As a functional readout of procoagulant state we examined thrombin-mediated von Willebrand factor (vWF) extrusion and multimer expression. We demonstrate that vWF extrusion and multimer expression is promoted by thrombin, that isoproterenol (a beta-adrenergic receptor agonist) augments this effect, whereas co-treatment with the beta-blockers propranolol and carvedilol blocks this effect. We also show that vWF extrusion and multimer expression is attenuated by treatment with the neuropeptide galanin, but not with NPY. Our results are consistent with a protective role of beta-blockers and galanin on endocardial endothelial health in heart failure. Improving endothelial health through galanin therapy is a future clinical application of this study.

Biomimetic Heparan Sulfate-Like Coated ePTFE Grafts Reduce In-graft Neointimal Hyperplasia in Ovine Carotids

BACKGROUND

Thrombogenicity and neointimal hyperplasia are major causes for synthetic vascular graft failure. Bioactive coatings like heparin have improved patency by reducing thrombogenicity, but neointimal hyperplasia still remains an unsolved problem. Surface coatings with heparan sulfate (HS), the major component of the glycocalyx of endothelial cells, have shown reduced platelet and cell adhesion in vitro. The aim of the study was to evaluate the in vivo surface properties of expanded ePTFE vascular grafts with a semisynthetic HS-like coating (SSHS).

METHODS

ePTFE vascular grafts (n = 16, diameter 3.5 mm) covalently coated with SSHS were compared with uncoated grafts (n = 16) of the same diameter in a carotid interposition model in 16 sheep. The grafts were harvested at 20 wk for histological and morphometric analysis.

RESULTS

SSHS-coated grafts showed less neointima formation than uncoated grafts (P < 0.001). There was no evidence for cell or protein adhesion to SSHS-coated grafts, whereas the surface of uncoated ePTFE grafts was covered with a confluent circular layer of neointima. No difference was found concerning reactions at the anastomotic site of the genuine carotid vessel, both groups displayed neointimal hyperplasia.

CONCLUSIONS

ePTFE grafts covalently coated with a semisynthetic SSHS-glycosaminoglycan successfully mimicked the endothelial glycocalyx. They displayed excellent antiadhesive properties preventing neointimal formation on the graft surface. The results indicate that a biomimetic SSHS coating may be a useful component of bioengineered grafts and an alternative to synthetic surfaces and endothelial seeding.

Thrombogenicity of flow diverters in an ex vivo shunt model: effect of phosphorylcholine surface modification

BACKGROUND

Flow diverters offer a promising treatment for cerebral aneurysms. However, they have associated thromboembolic risks, mandating chronic dual antiplatelet therapy (DAPT). Shield Technology is a phosphorylcholine surface modification of the Pipeline Embolization Device (PED) flow diverter, which has shown significant reductions in material thrombogenicity in vitro.

OBJECTIVE

To compare the thrombogenicity of PED, PED with Shield Technology (PED+Shield), and the Flow-Redirection Endoluminal Device (FRED)-with and without single antiplatelet therapy and DAPT-under physiological flow.

METHODS

An established non-human primate ex vivo arteriovenous shunt model of stent thrombosis was used. PED, PED+Shield, and FRED were tested without antiplatelet therapy, with acetylsalicylic acid (ASA) monotherapy, and with DAPT. Radiolabeled platelet deposition was quantified over 1 hour for each device and total fibrin deposition was also quantified.

RESULTS

Cumulative statistical analysis showed significantly lower platelet deposition on PED compared with FRED. The same statistical model showed significant decreases in platelet deposition when ASA, clopidogrel, or Shield Technology was used. Direct comparisons of device performances within antiplatelet conditions showed consistent significant decreases in platelet accumulation on PED+Shield relative to FRED. PED+Shield showed significant reductions in platelet deposition compared with unmodified PED without antiplatelet therapy and with DAPT. PED accumulated minimal fibrin with and without Shield Technology.

CONCLUSIONS

In this preclinical model, we have shown that the Shield Technology phosphorylcholine modification reduces the platelet-specific thrombogenicity of a flow diverter under physiologically relevant flow with and without DAPT. We have further identified increased fibrin-driven thrombogenicity associated with FRED relative to PED.

Bioactive Anti-Thrombotic Modification of Decellularized Matrix for Vascular Applications

The decellularized matrix derived from porcine small intestinal submucosa (SIS) is a widely used biomaterial being investigated for numerous applications. Currently, thrombus deposition and neointimal hyperplasia have limited the use of SIS in some vascular applications. To limit these detrimental processes, this work applies bioactive, endothelial-inspired properties to the material. SIS is modified with the endothelial cell membrane protein thrombomodulin and the glycosaminoglycan heparin to facilitate protein C activation and anticoagulant activity, respectively. Modifying SIS with thrombomodulin alone enables robust activated protein C (APC) generation, and thrombomodulin activity is maintained after prolonged exposure to fluid shear and blood plasma. Heparin-modified SIS has a potent anticoagulant activity. When both modifications are applied sequentially, SIS modified first with thrombomodulin then with heparin retains the full activity of each individual modification. Tubular SIS devices are connected to a baboon arteriovenous shunt to quantify thrombus deposition on these materials. After being exposed to flowing whole blood for 60 min, SIS devices modified first with thrombomodulin then with heparin have significantly less platelet accumulation compared to unmodified SIS devices. These studies demonstrate that modifying SIS with thrombomodulin and heparin confers APC generation and anticoagulant activity that results in reduced thrombogenesis.

Responses of endothelial cells, smooth muscle cells, and platelets dependent on the surface topography of polytetrafluoroethylene

In this study, the effect of different structures (flat, expanded, and electrospun) of polytetrafluoroethylene (PTFE) on the interactions of endothelial cells (ECs), smooth muscle cells (SMCs), and platelets was investigated. In addition, the mechanisms that govern the interactions between ECs, SMCs, and platelets with different structures of PTFE were discussed. The surface characterizations showed that the different structures of PTFE have the same surface chemistry, similar surface wettability and zeta potential, but uniquely different surface topography. The viability, proliferation, morphology, and phenotype of ECs and SMCs interacted with different structures of PTFE were investigated. Expanded PTFE (ePTFE) provided a relatively better surface for the growth of ECs. In case of SMC interactions, although all the different structures of PTFE inhibited SMC growth, a maximum inhibitory effect was observed for ePTFE. In case of platelet interactions, the electrospun PTFE provided a better surface for preventing the adhesion and activation of platelets. Thus, this study demonstrated that the responses of ECs, SMCs, and platelets strongly dependent on the surface topography of the PTFE. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2291-2304, 2016.

In vitro and ex vivo hemocompatibility of off-the-shelf modified poly(vinyl alcohol) vascular grafts

Synthetic small diameter vascular grafts with mechanical properties of native arteries, resistance to thrombosis and capacity to stimulate in situ endothelialization are an unmet clinical need. Poly(vinyl alcohol) hydrogel (PVA) is an excellent candidate as a vascular graft due to its tunable mechanical properties. However, the hydrophilicity and bio-inertness of PVA prevents endothelialization in vivo. We hypothesize that the modification of PVA with biomolecules and topographies creates a hemocompatible environment that also enhances bioactivity. PVA modified with fibronectin, RGDS peptide, cyclicRGD (cRGD) peptide, or heparin provided cell-adhesion motifs, which were confirmed by detection of nitrogen through X-ray photoelectron spectroscopy. Protein- and peptide-modified surfaces showed a slight increase in human vascular endothelial cell proliferation over unmodified PVA. With the exception of fibronectin modification, modified surfaces showed in vitro hemocompatibility comparable with unmodified PVA. To further improve bioactivity, cRGD-PVA was combined with gratings and microlens topographies. Combined modifications of 2 μm gratings or convex topography and cRGD significantly improved human vascular endothelial cell viability on PVA. In vitro hemocompatibility testing showed that topography on cRGD-PVA did not significantly trigger an increase of platelet adhesion or activation compared with unpatterned PVA. Using the more physiologically relevant ex vivo hemocompatibility testing, all PVA grafts tested showed similar platelet adhesion to ePTFE and significantly lower platelet accumulation compared to collagen-coated ePTFE grafts. The biochemical and topographical modification of PVA demonstrates excellent hemocompatibility with enhanced bioactivity of PVA, thus highlighting its potential as a vascular graft.

STATEMENT OF SIGNIFICANCE

New synthetic small diameter vascular grafts with mechanical properties, blood-clot resistance and endothelial lining mimicking native arteries remains an unresolved critical clinical need. We aim to achieve this by modifying the mechanically-tunable poly(vinyl alcohol) hydrogel (PVA) vascular graft with both biochemical and biophysical cues in the lumenal surface. PVA modified with cyclic RGD peptide and ordered micrometer-sized topography showed low platelet adhesion in both a rabbit in vitro and baboon ex vivo blood compatibility assay. Modified PVA also exhibited significant enhancement of human vascular endothelial cell viability and proliferation in vitro. The readily available, modified PVA grafts are the first to show biophysical and biochemical modification in a three-dimensional scaffold with hemocompatibility, biofunctionality and excellent potential for clinical application.

In vivo assessment of two endothelialization approaches on bioprosthetic valves for the treatment of chronic deep venous insufficiency

Chronic deep venous insufficiency is a debilitating disease with limited therapeutic interventions. A bioprosthetic venous valve could not only replace a diseased valve, but has the potential to fully integrate into the patient with a minimally invasive procedure. Previous work with valves constructed from small intestinal submucosa (SIS) showed improvements in patients' symptoms in clinical studies; however, substantial thickening of the implanted valve leaflets also occurred. As endothelial cells are key regulators of vascular homeostasis, their presence on the SIS valves may reduce the observed thickening. This work tested an off-the-shelf approach to capture circulating endothelial cells in vivo using biotinylated antikinase insert domain receptor antibodies in a suspended leaflet ovine model. The antibodies on SIS were oriented to promote cell capture and showed positive binding to endothelial cells in vitro; however, no differences were observed in leaflet thickness in vivo between antibody-modified and unmodified SIS. In an alternative approach, valves were pre-seeded with autologous endothelial cells and tested in vivo. Nearly all the implanted pre-seeded valves were patent and functioning; however, no statistical difference was observed in valve thickness with cell pre-seeding. Additional cell capture schemes or surface modifications should be examined to find an optimal method for encouraging SIS valve endothelialization to improve long-term valve function in vivo. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1610-1621, 2016.