A Highly Sensitive and Selective Hydrogen Peroxide Biosensor Based on Gold Nanoparticles and Three-Dimensional Porous Carbonized Chicken Eggshell Membrane

Biosensors Integration in Blood-Brain Barrier-on-a-Chip: Emerging Platform for Monitoring Neurodegenerative Diseases

Over the most recent decades, the development of new biological platforms to study disease progression and drug efficacy has been of great interest due to the high increase in the rate of neurodegenerative diseases (NDDs). Therefore, blood–brain barrier (BBB) as an organ-on-a-chip (OoC) platform to mimic brain-barrier performance could offer a deeper understanding of NDDs as well as a very valuable tool for drug permeability testing for new treatments. A very attractive improvement of BBB-oC technology is the integration of detection systems to provide continuous monitoring of biomarkers in real time and a fully automated analysis of drug permeably, rendering more efficient platforms for commercialization. In this Perspective, an overview of the main BBB-oC configurations is introduced and a critical vision of the BBB-oC platforms integrating electronic read out systems is detailed, indicating the strengths and weaknesses of current devices, proposing the great potential for biosensors integration in BBB-oC. In this direction, we name potential biomarkers to monitor the evolution of NDDs related to the BBB and/or drug cytotoxicity using biosensor technology in BBB-oC.

Thin Film Biocomposite Membrane for Forward Osmosis Supported by Eggshell Membrane

There is a general drive to adopt highly porous and less tortuous supports for forward osmosis (FO) membranes to reduce internal concentration polarization (ICP), which regulates the osmotic water permeation. As an abundant waste material, eggshell membrane (ESM) has a highly porous and fibrous structure that meets the requirements for FO membrane substrates. In this study, a polyamide-based biocomposite FO membrane was fabricated by exploiting ESM as a membrane support. The polyamide layer was deposited by the interfacial polymerization technique and the composite membrane exhibited osmotically driven water flux. Further, biocomposite FO membranes were developed by surface coating with GO for stable formation of the polyamide layer. Finally, the osmotic water flux of the eggshell composite membrane with a low structural parameter (~138 µm) reached 46.19 L m⁻² h⁻¹ in FO mode using 2 M NaCl draw solution.

Ultrasensitive Detection of Ribonucleic Acid Biomarkers Using Portable Sensing Platforms Based on Organic Electrochemical Transistors

The analysis of ribonucleic acid (RNA) plays an important role in the early diagnosis of diseases and will greatly benefit patients with a higher cure rate. However, the low abundance of RNA in physiological environments requires ultrahigh sensitivity of a detection technology. Here, we construct a portable and smart-phone-controlled biosensing platform based on disposable organic electrochemical transistors for ultrasensitive analysis of microRNA (miRNA) biomarkers within 1 h. Due to their inherent amplification function, the devices can detect miRNA cancer biomarkers from little-volume solutions with concentrations down to 10^-14 M. The devices can distinguish blood miRNA expression levels at different cancer stages using a 4T1 mouse tumor model. The technique for ultrasensitive and fast detection of RNA biomarkers with high selectivity opens a window for mobile diagnosis of various diseases with low cost.

Avian Eggshell Membrane as a Novel Biomaterial: A Review

The eggshell membrane (ESM), mainly composed of collagen-like proteins, is readily available as a waste product of the egg industry. As a novel biomaterial, ESM is attractive for its applications in the nutraceutical, cosmetic, and pharmaceutical fields. This review provides the main information about the structure and chemical composition of the ESM as well as some approaches for its isolation and solubilization. In addition, the review focuses on the role and performance of bioactive ESM-derived products in various applications, while a detailed literature survey is provided. The evaluation of the safety of ESM is also summarized. Finally, new perspectives regarding the potential of ESM as a novel biomaterial in various engineering fields are discussed. This review provides promising future directions for comprehensive application of ESM.

SERR Spectroelectrochemistry as a Guide for Rational Design of DyP-Based Bioelectronics Devices

Immobilised dye-decolorizing peroxidases (DyPs) are promising biocatalysts for the development of biotechnological devices such as biosensors for the detection of H2O2. To this end, these enzymes have to preserve native, solution properties upon immobilisation on the electrode surface. In this work, DyPs from Cellulomonas bogoriensis (CboDyP), Streptomyces coelicolor (ScoDyP) and Thermobifida fusca (TfuDyP) are immobilised on biocompatible silver electrodes functionalized with alkanethiols. Their structural, redox and catalytic properties upon immobilisation are evaluated by surface-enhanced resonance Raman (SERR) spectroelectrochemistry and cyclic voltammetry. Among the studied electrode/DyP constructs, only CboDyP shows preserved native structure upon attachment to the electrode. However, a comparison of the redox potentials of the enzyme in solution and immobilised states reveals a large discrepancy, and the enzyme shows no electrocatalytic activity in the presence of H2O2. While some immobilised DyPs outperform existing peroxidase-based biosensors, others fail to fulfil the essential requirements that guarantee their applicability in the immobilised state. The capacity of SERR spectroelectrochemistry for fast screening of the performance of immobilised heme enzymes places it in the front-line of experimental approaches that can advance the search for promising DyP candidates.

3D Printed Bioresponsive Devices with Selective Permeability Inspired by Eggshell Membrane for Effective Biochemical Conversion

Eggshell membrane has selective permeability that enables gas or liquid molecules to pass through while effectively preventing migration of microbial species. Herein, inspired by the architecture of the eggshell membrane, we employ three-dimensional (3D) printing techniques to realize bioresponsive devices with excellent selective permeability for effective biochemical conversion. The fabricated devices show 3D conductive carbon nanofiber membranes in which precultured microbial cells are controllably deployed. The resulting outcome provides excellent selective permeability between chemical and biological species, which enables acquisition of target responses generated by biological species confined within the device upon input signals. In addition, electrically conductive carbon nanofiber networks provide a platform for real-time monitoring of metabolism of microbial cells in the device. The suggested platform represents an effort to broaden microbial applications by constructing biologically programmed devices for desired responses enabled by designated deployment of engineered cells in a securely confined manner within enclosed membranes using 3D printing methods.

Environmentally Friendly Manufacturing of Flexible Graphite Electrodes for a Wearable Device Monitoring Zinc in Sweat

Electrochemical sensors based on graphite and polymers have emerged as powerful analytical tools for bioanalytical applications. However, most of the fabrication processes are not environmentally friendly because they often involve the use of toxic reagents and generate waste. This study describes an alternative method to produce flexible electrodes in plastic substrates using graphite powder and thermal laminating sheets by solid-solid deposition through hot compression, without the use of hazardous chemical reagents. The electrodes developed through the proposed approach have successfully demonstrated flexibility, robustness, reproducibility (relative standard deviation around 6%), and versatility. The electrodes were thoroughly characterized by cyclic voltammetry, electrochemical impedance spectroscopy, Raman spectroscopy, and scanning electron microscopy. As a proof of concept, the electrode surfaces were modified with bismuth and used for zinc analysis in sweat. The modified electrodes presented linearity (R² = 0.996) for a wide zinc concentration range (50-2000 ppb) and low detection limit (4.31 ppb). The proposed electrodes were tested using real sweat samples and the achieved zinc concentrations did not differ statistically from the data obtained by atomic absorption spectroscopy. To allow wearable applications, a 3D-printed device was fabricated, integrated with the proposed electrochemical system, and fixed at the abdomen by using an elastic tape to collect, store, and analyze the sweat sample. The matrix effect test was performed, spiking the real sample with different zinc levels, and the recovery values varied between 85 and 106%, thus demonstrating adequate accuracy and robustness of the flexible electrodes developed based on the proposed fabrication method.

Thickness-Tunable Eggshell Membrane Hydrolysate Nanocoating with Enhanced Cytocompatibility and Neurite Outgrowth

The eggshell membrane is one of the easily obtainable natural biomaterials, but has been neglected in the biomaterial community, compared with marine biomaterials and discarded as a food waste. In this work, we utilized the ESM hydrolysate (ESMH), which was obtained by the enzymochemical method, as a bioactive functional material for interfacial bioengineering, exemplified by thickness-tunable, layer-by-layer (LbL) nanocoating with the Fe(III)-tannic acid (TA) complex. [Fe(III)-TA/ESMH] LbL films, ending with the ESMH layer, showed great cytocompatiblility with HeLa cells and even primary hippocampal neuron cells. More importantly, the films were found to be neurochemically active, inducing the acceleration of neurite outgrowth for the long-term neuron culture. We believe that the ability for building cytocompatible ESMH films in a thickness-tunable manner would be applicable to a broad range of different nanomaterials in shape and size and would be utilized with multimodal functionalities for biomedical applications, such as bioencapsulation, theranostics, and regenerative medicine.

Cucurbit[n]uril (n = 6, 7) Based Carbon-Gold Hybrids with Peroxidase-Like Activity

Despite the combination of molecular recognition and local electric field enhancement endowing cucurbit[n]uril-capped metallic nanoparticles, indicating great potential in a variety of areas, prior work has paid little attention to carbonizing cucurbit[n]uril on the surface of gold nanoparticles, which may propose new carbon-gold hybrid materials with interesting applications. In this work, we developed a simple and cost-effective method to prepare carbon-gold hybrids by carbonizing cucurbit[n]uril modified gold nanoparticles. The as-prepared cucurbit[n]uril based carbon and carbon-gold hybrid materials have shown to possess peroxidase-like activity. All cucurbit[n]uril based nanomaterials exhibited high catalytic activity over a pH range 2–6 and more tolerant to high temperature (up to 60 °C) when compared to natural horseradish peroxidase.

Bioinspired Synthesis of Mesoporous Gold-silica Hybrid Microspheres as Recyclable Colloidal SERS Substrates

Noble metal nanostructures have been intensively investigated as active substrates for surface-enhanced Raman spectroscopy (SERS) from visible to near-IR wavelengths. However, metal nanoparticle-based SERS analysis in solutions is very challenging due to uncontrollable and irreproducible colloid aggregation. Here we report the templated synthesis of porous gold-silica hybrid microspheres and their application as reusable colloidal SERS substrates. Mesoporous polymer microspheres are synthesized and used as templates for the synthesis of non-aggregated gold nanoparticles, followed by polydopamine-mediated silicification to fabricate mesoporous gold-silica hybrid microspheres. The mesoporous hybrid particles detect crystal violet in the order of 10^-8 M and provide the structural durability of the immobilized gold nanoparticles, allowing them to be recycled for repeated SERS analyses for analytes in a solution with the similar sensitivity. This work suggests that the mesoporous gold-silica hybrid microspheres are attractive SERS substrates in terms of reusability, sensitivity, and stability.

Evaluation of a mixed anionic-nonionic surfactant modified eggshell membrane as an advantageous adsorbent for the solid-phase extraction of Sudan I-IV as model analytes

The coadsorption of mixed anionic-nonionic surfactants, sodium dodecylbenzenesulfonate with Triton X-100, on the surface of eggshell membrane was investigated based on adsorption isotherms to improve the solid-phase extraction performance of eggshell membrane toward organic contaminants. Results showed that even though excess Triton X-100 might inhibit the adsorption of sodium dodecylbenzenesulfonate, a low dosage of Triton X-100 can significantly improve sodium dodecylbenzenesulfonate modification and enhance the extraction efficiency of eggshell membrane from 73.7 to 100.4% because of the formation of mixed hemimicelles. The highest recovery was achieved at 2:8 (Triton X-100/sodium dodecylbenzenesulfonate mass ratios), and multiple mechanisms involving π-π interactions, hydrophobic effect, and π-π electron donor-acceptor interactions contributed to the strong extraction affinity. When mixed, the Triton X-100 and sodium dodecylbenzenesulfonate modified eggshell membrane packed cartridge coupled with high-performance liquid chromatography was applied for the simultaneous determination of trace Sudan I-IV, and low detection limits (0.16-0.26 ng/L) were achieved with satisfactory linearity (R²  > 0.999) in 10-10 000 μg/L. For real samples, Sudan II and III in one chilli sauce sample were found at 4.3 and 1.7 μg/kg. Sudan I-IV recoveries at three spiked levels were 87.4-102.9% with precisions <6.8%. Comparison with commonly used solid-phase extraction adsorbents and methods further reflected the superiorities of the proposed adsorbent in sensitivity, retention ability, and applicability.

Novel enzymatic glucose biosensor based on distributed electrodes covered with a solvothermal synthesized graphene material and platinum nanoparticles

Series connected distributed sensing electrode patterned with TRGO decorated platinum nanoparticles is a good platform for enzymatic glucose sensor.