Impedance Flow Cytometry: A Novel Technique in Pollen Analysis

Advancing Intelligent Organ-on-a-Chip Systems with Comprehensive In Situ Bioanalysis

In vitro models are essential to a broad range of biomedical research, such as pathological studies, drug development, and personalized medicine. As a potentially transformative paradigm for 3D in vitro models, organ-on-a-chip (OOC) technology has been extensively developed to recapitulate sophisticated architectures and dynamic microenvironments of human organs by applying the principles of life sciences and leveraging micro- and nanoscale engineering capabilities. A pivotal function of OOC devices is to support multifaceted and timely characterization of cultured cells and their microenvironments. However, in-depth analysis of OOC models typically requires biomedical assay procedures that are labor-intensive and interruptive. Herein, the latest advances toward intelligent OOC (iOOC) systems, where sensors integrated with OOC devices continuously report cellular and microenvironmental information for comprehensive in situ bioanalysis, are examined. It is proposed that the multimodal data in iOOC systems can support closed-loop control of the in vitro models and offer holistic biomedical insights for diverse applications. Essential techniques for establishing iOOC systems are surveyed, encompassing in situ sensing, data processing, and dynamic modulation. Eventually, the future development of iOOC systems featuring cross-disciplinary strategies is discussed.

Deep learning-based high-throughput detection of in vitro germination to assess pollen viability from microscopic images

In vitro pollen germination is considered the most efficient method to assess pollen viability. The pollen germination frequency and pollen tube length, which are key indicators of pollen viability, should be accurately measured during in vitro culture. In this study, a Mask R-CNN model trained using microscopic images of tree peony (Paeonia suffruticosa) pollen has been proposed to rapidly detect the pollen germination rate and pollen tube length. To reduce the workload during image acquisition, images of synthesized crossed pollen tubes were added to the training dataset, significantly improving the model accuracy in recognizing crossed pollen tubes. At an Intersection over Union threshold of 50%, a mean average precision of 0.949 was achieved. The performance of the model was verified using 120 testing images. The R2 value of the linear regression model using detected pollen germination frequency against the ground truth was 0.909 and that using average pollen tube length was 0.958. Further, the model was successfully applied to two other plant species, indicating a good generalizability and potential to be applied widely.

Pollen viability, longevity, and function in angiosperms: key drivers and prospects for improvement

Pollen grains are central to sexual plant reproduction and their viability and longevity/storage are critical for plant physiology, ecology, plant breeding, and many plant product industries. Our goal is to present progress in assessing pollen viability/longevity along with recent advances in our understanding of the intrinsic and environmental factors that determine pollen performance: the capacity of the pollen grain to be stored, germinate, produce a pollen tube, and fertilize the ovule. We review current methods to measure pollen viability, with an eye toward advancing basic research and biotechnological applications. Importantly, we review recent advances in our understanding of how basic aspects of pollen/stigma development, pollen molecular composition, and intra- and intercellular signaling systems interact with the environment to determine pollen performance. Our goal is to point to key questions for future research, especially given that climate change will directly impact pollen viability/longevity. We find that the viability and longevity of pollen are highly sensitive to environmental conditions that affect complex interactions between maternal and paternal tissues and internal pollen physiological events. As pollen viability and longevity are critical factors for food security and adaptation to climate change, we highlight the need to develop further basic research for better understanding the complex molecular mechanisms that modulate pollen viability and applied research on developing new methods to maintain or improve pollen viability and longevity.

Deductive automated pollen classification in environmental samples via exploratory deep learning and imaging flow cytometry

Pollen and tracheophyte spores are ubiquitous environmental indicators at local and global scales. Palynology is typically performed manually by microscopic analysis; a specialised and time-consuming task limited in taxonomical precision and sampling frequency, therefore restricting data quality used to inform climate change and pollen forecasting models. We build on the growing work using AI (artificial intelligence) for automated pollen classification to design a flexible network that can deal with the uncertainty of broad-scale environmental applications. We combined imaging flow cytometry with Guided Deep Learning to identify and accurately categorise pollen in environmental samples; here, pollen grains captured within c. 5500 Cal yr BP old lake sediments. Our network discriminates not only pollen included in training libraries to the species level but, depending on the sample, can classify previously unseen pollen to the likely phylogenetic order, family and even genus. Our approach offers valuable insights into the development of a widely transferable, rapid and accurate exploratory tool for pollen classification in 'real-world' environmental samples with improved accuracy over pure deep learning techniques. This work has the potential to revolutionise many aspects of palynology, allowing a more detailed spatial and temporal understanding of pollen in the environment with improved taxonomical resolution.

Quantification of pollen viability in Lantana camara by digital holographic microscopy

Pollen grains represent the male gametes of seed plants and their viability is critical for sexual reproduction in the plant life cycle. Palynology and viability studies have traditionally been used to address a range of botanical, ecological and geological questions, but recent work has revealed the importance of pollen viability in invasion biology as well. Here, we report an efficient visual method for assessing the viability of pollen using digital holographic microscopy (DHM). Imaging data reveal that quantitative phase information provided by the technique can be correlated with viability as indicated by the outcome of the colorimetric test. We successfully test this method on pollen grains of Lantana camara, a well-known alien invasive plant in the tropical world. Our results show that pollen viability may be assessed accurately without the usual staining procedure and suggest potential applications of the DHM methodology to a number of emerging areas in plant science.

Overcoming roadblocks for in vitro nurseries in plants: induction of meiosis

Efforts to increase genetic gains in breeding programs of flowering plants depend on making genetic crosses. Time to flowering, which can take months to decades depending on the species, can be a limiting factor in such breeding programs. It has been proposed that the rate of genetic gain can be increased by reducing the time between generations by circumventing flowering through the in vitro induction of meiosis. In this review, we assess technologies and approaches that may offer a path towards meiosis induction, the largest current bottleneck for in vitro plant breeding. Studies in non-plant, eukaryotic organisms indicate that the in vitro switch from mitotic cell division to meiosis is inefficient and occurs at very low rates. Yet, this has been achieved with mammalian cells by the manipulation of a limited number of genes. Therefore, to experimentally identify factors that switch mitosis to meiosis in plants, it is necessary to develop a high-throughput system to evaluate a large number of candidate genes and treatments, each using large numbers of cells, few of which may gain the ability to induce meiosis.

Development of a Novel Design of Microfluidic Impedance Cytometry for Improved Sensitivity and Cell Identification

A long-standing issue for microfluidic impedance cytometry devices is the accuracy in determining the size of cells during counting and measurements. In this paper, we introduce a novel design that produces a homogeneous electric field in the sensing region and demonstrates higher accuracy than traditional designs in cell counting and sizing, reducing the reliance on cell focusing and signal postprocessing. The concept is validated, and the increased accuracy of the device over traditional designs is demonstrated through the use of finite element simulations to generate suitable data sets for particle trajectories and model expected signal variations.

Evaluation of methods to assess the quality of cryopreserved Solanaceae pollen

Solanaceae pollen cryopreservation is a common practice in the hybrid seed production industry worldwide, enabling effective hybridization across geographical and seasonal limitations. As pollination with low quality pollen can result in significant seed yield loss, monitoring the pollen quality has become an important risk management tool. In this study, pollen quality analysis methods were evaluated for their suitability for routine quality control of cryopreserved pollen batches. The assessments, including pollen viability, pollen germinability and pollen vigor analysis, were conducted in two locations on a diverse set of cryopreserved tomato and pepper pollen batches. While the viability obtained by Impedance Flow Cytometry (IFC) can be interpreted as the pollen's potential to germinate, the in vitro germination assay directly quantifies this functionality under given assay conditions. A linear correlation was found between pollen viability obtained by IFC and in vitro germinability. In conclusion, IFC is the most suitable tool for applications and industries requiring a high degree of automation, throughput, repeatability, and reproducibility. In vitro germination assays are suitable for studies within certain temporal and geographic limitations, due to difficulties in standardization. On the other hand, vigor assessments are not sufficiently addressing the needs of the industry due to poor reproducibility and low throughput.

Using Impedance Flow Cytometry for Rapid Viability Classification of Heat-Treated Bacteria

In the future, rapid electrical characterization of cells with impedance flow cytometry promises to be a fast and accurate method for the evaluation of cell properties. In this paper, we investigate how the conductivity of the suspending medium along with the heat exposure time affects the viability classification of heat-treated E. coli. Using a theoretical model, we show that perforation of the bacteria membrane during heat exposure changes the impedance of the bacterial cell from effectively less conducting than the suspension medium to effectively more conducting. Consequently, this results in a shift in the differential argument of the complex electrical current that can be measured with impedance flow cytometry. We observe this shift experimentally through measurements on E. coli samples with varying medium conductivity and heat exposure times. We show that increased exposure time and lower medium conductivity results in improved classification between untreated and heat-treated bacteria. The best classification was achieved with a medium conductivity of 0.045 S/m after 30 min of heat exposure.

Genomic Regions and Floral Traits Contributing to Low Temperature Tolerance at Young Microspore Stage in a Rice (Oryza sativa L.) Recombinant Inbred Line Population of Sherpa/IRAT109

Aerobic rice production (AP) consumes less water compared to flooded systems. Developing genotypes and identifying genomic regions associated with low temperature (LT) tolerance at the young microspore stage (YMS) is imperative for AP, particularly for temperate regions. Using a recombinant inbred line population derived from the Australian LT tolerant variety Sherpa, experiments were conducted to map and dissect quantitative trait loci (QTL) associated with spikelet sterility (SS) after exposure to LT and to investigate floral traits contributing to the development of lower SS. Significant genotypic variation for SS was observed in the population after exposure to LT at YMS. Three genomic regions associated with SS, qYMCT3, qYMCT4, and qYMCT8.1 were identified in chromosomes 3, 4, and 8 respectively, using multiple QTL models explaining 22.4% of the genotypic variation. Introgression of the favorable allele from qYMCT3 was estimated to reduce SS by up to 15.4%. A co-locating genomic region with qYMCT3, qDTHW3.1 was identified as the major QTL affecting days to heading and explained as much as 44.7% of the genotypic variation. Whole-genome sequence and bioinformatic analyses demonstrated OsMADS50 as the candidate gene for qYMCT3/qDTHW3.1 and to our knowledge, this was the first attempt in connecting the role of OsMADS50 in both LT and flowering in rice. Differential sets selected for extreme SS showed LT tolerant genotype group produced higher total pollen per spikelet resulting in a higher number of dehisced anthers and pollen on stigma and eventually, lower SS than THE sensitive group. The relationship between these key floral traits with SS was induced only after exposure to LT and was not observed in warm ideal temperature conditions. Identification of elite germplasm with favorable QTL allele and combinations, gene cloning, and pyramiding with additional high-value QTL for key traits should empower breeders to develop AP adapted genotypes for temperate growing regions, and ultimately produce climate-resilient rice.

Low Salicylic Acid Level Improves Pollen Development Under Long-Term Mild Heat Conditions in Tomato

Exposure to high temperatures leads to failure in pollen development, which may have significant implications for food security with ongoing climate change. We hypothesized that the stress response-associated hormone salicylic acid (SA) affects pollen tolerance to long-term mild heat (LTMH) (≥14 days exposure to day-/nighttime temperature of 30-34/24-28°C, depending on the genotype), either positively, by inducing acclimation, or negatively, by reducing investment in reproductive development. Here, we investigated these hypotheses assessing the pollen thermotolerance of a 35S:nahG tomato line, which has low SA levels. We found that reducing the SA level resulted in increased pollen viability of plants grown in LTMH and further characterized this line by transcriptome, carbohydrate, and hormone analyses. Low expression of JAZ genes in 35S:nahG and LTMH hypersensitivity of low-jasmonic acid (JA) genotypes together suggest that the increased pollen thermotolerance in the low-SA line involves enhanced JA signal in developing anthers in LTMH. These findings have potential application in the development of more thermotolerant crops.

Potential of Impedance Flow Cytometry to Assess the Viability and Quantity of Cannabis sativa L. Pollen

Over the last decade, efforts to breed new Cannabis sativa L. cultivars with high Cannabidiol (CBD) and other non-psychoactive cannabinoids with low tetrahydrocannabinol (THC) levels have increased. In this context, the identification of the viability and quantity of pollen, which represents the fitness of male gametophytes, to accomplish successful pollination is of high importance. The present study aims to evaluate the potential of impedance flow cytometry (IFC) for the assessment of pollen viability (PV) and total number of pollen cells (TPC) in two phytocannabinoid-rich cannabis genotypes, KANADA (KAN) and A4 treated with two different chemical solutions, silver thiosulfate solution (STS) and gibberellic acid (GA3). Pollen was collected over a period of 8 to 24 days after flowering (DAF) in a greenhouse experiment. Impedance flow cytometry (IFC) technology was used with Cannabis sativa to assess the viability and quantity of pollen. The results showed that the number of flowers per plant was highest at 24 DAF for both genotypes, A4 (317.78) and KAN (189.74). TPC induced by STS was significantly higher compared to GA3 over the collection period of 8 to 24 DAF with the highest mean TPC of 1.54 × 105 at 14 DAF. STS showed significantly higher viability of pollen compared to GA3 in genotype KAN, with the highest PV of 78.18% 11 DAF. Genotype A4 also showed significantly higher PV with STS at 8 (45.66%), 14 (77.88%), 18 (79.37%), and 24 (51.92%) DAF compared to GA3. Furthermore, counting the numbers of flowers did not provide insights into the quality and quantity of pollen; the results showed that PV was highest at 18 DAF with A4; however, the number of flowers per plant was 150.33 at 18 DAF and was thus not the maximum of produced flowers within the experiment. IFC technology successfully estimated the TPC and differentiated between viable and non-viable cells over a period of 8 to 24 DAF in tested genotypes of Cannabis sativa. IFC seems to be an efficient and reliable method to estimate PV, opening new chances for plant breeding and plant production processes in cannabis.

What is the future of electrical impedance spectroscopy in flow cytometry?

More than 20 years ago, electrical impedance spectroscopy (EIS) was proposed as a potential characterization method for flow cytometry. As the setup is comparably simple and the method is label-free, EIS has attracted considerable interest from the research community as a potential alternative to standard optical methods, such as fluorescence-activated cell sorting (FACS). However, until today, FACS remains by and large the laboratory standard with highly developed capabilities and broad use in research and clinical settings. Nevertheless, can EIS still provide a complement or alternative to FACS in specific applications? In this Perspective, we will give an overview of the current state of the art of EIS in terms of technologies and capabilities. We will then describe recent advances in EIS-based flow cytometry, compare the performance to that of FACS methods, and discuss potential prospects of EIS in flow cytometry.

Recent Advances in Electrical Impedance Sensing Technology for Single-Cell Analysis

Cellular heterogeneity is of significance in cell-based assays for life science, biomedicine and clinical diagnostics. Electrical impedance sensing technology has become a powerful tool, allowing for rapid, non-invasive, and label-free acquisition of electrical parameters of single cells. These electrical parameters, i.e., equivalent cell resistance, membrane capacitance and cytoplasm conductivity, are closely related to cellular biophysical properties and dynamic activities, such as size, morphology, membrane intactness, growth state, and proliferation. This review summarizes basic principles, analytical models and design concepts of single-cell impedance sensing devices, including impedance flow cytometry (IFC) to detect flow-through single cells and electrical impedance spectroscopy (EIS) to monitor immobilized single cells. Then, recent advances of both electrical impedance sensing systems applied in cell recognition, cell counting, viability detection, phenotypic assay, cell screening, and other cell detection are presented. Finally, prospects of impedance sensing technology in single-cell analysis are discussed.

Electro-optical classification of pollen grains via microfluidics and machine learning

In aerobiological monitoring and agriculture there is a pressing need for accurate, label-free and automated analysis of pollen grains, in order to reduce the cost, workload and possible errors associated to traditional approaches. Methods: We propose a new multimodal approach that combines electrical sensing and optical imaging to classify pollen grains flowing in a microfluidic chip at a throughput of 150 grains per second. Electrical signals and synchronized optical images are processed by two independent machine learning-based classifiers, whose predictions are then combined to provide the final classification outcome. Results: The applicability of the method is demonstrated in a proof-of-concept classification experiment involving eight pollen classes from different taxa. The average balanced accuracy is 78.7 % for the electrical classifier, 76.7 % for the optical classifier and 84.2 % for the multimodal classifier. The accuracy is 82.8 % for the electrical classifier, 84.1 % for the optical classifier and 88.3 % for the multimodal classifier. Conclusion: The multimodal approach provides better classification results with respect to the analysis based on electrical or optical features alone. Significance: The proposed methodology paves the way for automated multimodal palynology. Moreover, it can be extended to other fields, such as diagnostics and cell therapy, where it could be used for label-free identification of cell populations in heterogeneous samples.

Applications of Impedance Flow Cytometry in Doubled Haploid Technology

Efficient doubled haploid (DH) plant production is of great interest in the plant breeding industry and research because homozygous lines are obtained within a single generation shortening the breeding cycle substantially. DH protocol development can be a time- and resource-consuming process due to numerous factors affecting its success and efficiency. Here we present concepts and examples about how critical success factors can be identified throughout a DH protocol and an early microspore response monitored by simple impedance flow cytometry (IFC) measurements, which will help to optimize each step of an androgenesis-based DH protocol.

The potential of resilient carbon dynamics for stabilizing crop reproductive development and productivity during heat stress

Impaired carbon metabolism and reproductive development constrain crop productivity during heat stress. Reproductive development is energy intensive, and its requirement for respiratory substrates rises as associated metabolism increases with temperature. Understanding how these processes are integrated and the extent to which they contribute to the maintenance of yield during and following periods of elevated temperatures is important for developing climate-resilient crops. Recent studies are beginning to demonstrate links between processes underlying carbon dynamics and reproduction during heat stress, consequently a summation of research that has been reported thus far and an evaluation of purported associations are needed to guide and stimulate future research. To this end, we review recent studies relating to source-sink dynamics, non-foliar photosynthesis and net carbon gain as pivotal in understanding how to improve reproductive development and crop productivity during heat stress. Rapid and precise phenotyping during narrow phenological windows will be important for understanding mechanisms underlying these processes, thus we discuss the development of relevant high-throughput phenotyping approaches that will allow for more informed decision-making regarding future crop improvement.

An easy-fabricated and disposable polymer-film microfluidic impedance cytometer for cell sensing

We report here an easy-fabricated and disposable polymer-film microfluidic impedance cytometer (PMIC) integrated with inertial focusing and parallel facing electrodes for cell sensing. The cells are first focused in an asymmetric serpentine channel, and then their impedance signals are measured when passing through the electrode region. The proposed PMIC device is the first impedance cytometer that is fabricated into a flexible sheet (with a thickness of 0.45 mm) by using the materials of commonly-available ITO-coated polymer films and double-sided adhesive tapes, the whole fabrication process is shortened from traditional 3-4 days to less than 5 min by using UV laser cutting. To verify the feasibility of our device for cell sensing, we explore the focusing behaviors of three differently sized particles and two types of tumor cells, and analyze their impedance signals. The results show that our device is capable of obtaining impedance information on numbers, diameters, and longitudinal positions of cells. We envision that our PMIC device is promising in label-free cell sensing owning to the advantages of low cost, small footprint, and simple fabrication.

Microfluidic impedance cytometry for single-cell sensing: Review on electrode configurations

Single-cell analysis has gained considerable attention for disease diagnosis, drug screening, and differentiation monitoring. Compared to the well-established flow cytometry, which uses fluorescent-labeled antibodies, microfluidic impedance cytometry (MIC) offers a simple, label-free, and noninvasive method for counting, classifying, and monitoring cells. Superior features including a small footprint, low reagent consumption, and ease of use have also been reported. The MIC device detects changes in the impedance signal caused by cells passing through the sensing/electric field zone, which can extract information regarding the size, shape, and dielectric properties of these cells. According to recent studies, electrode configuration has a remarkable effect on detection accuracy, sensitivity, and throughput. With the improvement in microfabrication technology, various electrode configurations have been reported for improving detection accuracy and throughput. However, the various electrode configurations of MIC devices have not been reviewed. In this review, the theoretical background of the impedance technique for single-cell analysis is introduced. Then, two-dimensional, three-dimensional, and liquid electrode configurations are discussed separately; their sensing mechanisms, fabrication processes, advantages, disadvantages, and applications are also described in detail. Finally, the current limitations and future perspectives of these electrode configurations are summarized. The main aim of this review is to offer a guide for researchers on the ongoing advancement in electrode configuration designs.

Flow cytometric analysis of pollen and spores: An overview of applications and methodology

Pollen grains are the male gametophytes in a seed-plant life cycle. Their small, particulate nature and crucial role in plant reproduction have made them an attractive object of study using flow cytometry (FCM), with a wide range of applications existing in the literature. While methodological considerations for many of these overlap with those for other tissue types (e.g., general considerations for the measurement of nuclear DNA content), the relative complexity of pollen compared to single cells presents some unique challenges. We consider these here in the context of both the identification and isolation of pollen and its subunits, and the types of research applications. While the discussion here mostly concerns pollen, the general principles described here can be extended to apply to spores in ferns, lycophytes, and bryophytes. In addition to recommendations provided in more general studies, some recurring and notable issues related specifically to pollen and spores are highlighted.

Single-cell microfluidic impedance cytometry: from raw signals to cell phenotypes using data analytics

The biophysical analysis of single-cells by microfluidic impedance cytometry is emerging as a label-free and high-throughput means to stratify the heterogeneity of cellular systems based on their electrophysiology. Emerging applications range from fundamental life-science and drug assessment research to point-of-care diagnostics and precision medicine. Recently, novel chip designs and data analytic strategies are laying the foundation for multiparametric cell characterization and subpopulation distinction, which are essential to understand biological function, follow disease progression and monitor cell behaviour in microsystems. In this tutorial review, we present a comparative survey of the approaches to elucidate cellular and subcellular features from impedance cytometry data, covering the related subjects of device design, data analytics (i.e., signal processing, dielectric modelling, population clustering), and phenotyping applications. We give special emphasis to the exciting recent developments of the technique (timeframe 2017-2020) and provide our perspective on future challenges and directions. Its synergistic application with microfluidic separation, sensor science and machine learning can form an essential toolkit for label-free quantification and isolation of subpopulations to stratify heterogeneous biosystems.

A Bayesian Approach for Coincidence Resolution in Microfluidic Impedance Cytometry

OBJECTIVE

Cell counting and characterization is fundamental for medicine, science and technology. Coulter-type microfluidic devices are effective and automated systems for cell/particle analysis, based on the electrical sensing zone principle. However, their throughput and accuracy are limited by coincidences (i.e., two or more particles passing through the sensing zone nearly simultaneously), which reduce the observed number of particles and may lead to errors in the measured particle properties. In this work, a novel approach for coincidence resolution in microfluidic impedance cytometry is proposed.

METHODS

The approach relies on: (i) a microchannel comprising two electrical sensing zones and (ii) a model of the signals generated by coinciding particles. Maximum a posteriori probability (MAP) estimation is used to identify the model parameters and therefore characterize individual particle properties.

RESULTS

Quantitative performance assessment on synthetic data streams shows a counting sensitivity of 97% and a positive predictive value of 99% at concentrations of 2×10⁶ particles/ml. An application to red blood cell analysis shows accurate particle characterization up to a throughput of about 2500 particles/s. An original formula providing the expected number of coinciding particles is derived, and good agreement is found between experimental results and theoretical predictions.

CONCLUSION

The proposed cytometer enables the decomposition of signals generated by coinciding particles into individual particle contributions, by using a Bayesian approach.

SIGNIFICANCE

This system can be profitably used in applications where accurate counting and characterization of cell/particle suspensions over a broad range of concentrations is required.

Light promoted brown staining of protoplasm by Ag+ is ideal to test wheat pollen viability rapidly

Pollen viability is crucial for wheat breeding programs. The unique potential of the protoplasm of live cells to turn brown due to the synthesis of silver nanoparticles (AgNPs) through rapid photoreduction of Ag+, was exploited for testing wheat pollen viability. Ag+-viability test medium (consisting of 0.5 mM AgNO3 and 300 mM KNO3) incubated with wheat pollen turned brown within 2 min under intense light (~600 μmol photon flux density m-2s-1), but not in dark. The brown medium displayed AgNPs-specific surface plasmon resonance band in its absorption spectrum. Light microscopic studies showed the presence of uniformly stained brown protoplasm in viable pollen incubated with Ag+-viability medium in the presence of light. Investigations with transmission electron microscope coupled with energy dispersive X-ray established the presence of distinct 5-35 nm NPs composed of Ag. Powder X-ray diffraction analysis revealed that AgNPs were crystalline and biphasic composed of Ag0 and Ag2O. Conversely, non-viable pollen and heat-killed pollen did not turn brown on incubation with Ag+-medium in light. We believe that the viable wheat pollen turn brown rapidly by bio-transforming Ag+ to AgNPs through photoreduction. Our findings furnish a novel simplest and rapid method for testing wheat pollen viability.

Hazelnut Pollen Phenotyping Using Label-Free Impedance Flow Cytometry

Impedance flow cytometry (IFC) is a versatile lab-on-chip technology which enables fast and label-free analysis of pollen grains in various plant species, promising new research possibilities in agriculture and plant breeding. Hazelnut is a monoecious, anemophilous species, exhibiting sporophytic self-incompatibility. Its pollen is dispersed by wind in midwinter when temperatures are still low and relative humidity is usually high. Previous research found that hazelnut can be characterized by high degrees of pollen sterility following a reciprocal chromosome translocation occurring in some cultivated genotypes. In this study, IFC was used for the first time to characterize hazelnut pollen biology. IFC was validated via dye exclusion in microscopy and employed to (i) follow pollen hydration over time to define the best pre-hydration treatment for pollen viability evaluation; (ii) test hazelnut pollen viability and sterility on 33 cultivars grown in a collection field located in central Italy, and two wild hazelnuts. The accessions were also characterized by their amount and distribution of catkins in the tree canopy. Pollen sterility rate greatly varied among hazelnut accessions, with one main group of highly sterile cultivars and a second group, comprising wild genotypes and the remaining cultivars, producing good quality pollen. The results support the hypothesis of recurring reciprocal translocation events in Corylus avellana cultivars, leading to the observed gametic semi-sterility. The measured hazelnut pollen viability was also strongly influenced by pollen hydration (R adj 2 = 0.83, P ≤ 0.0001) and reached its maximum at around 6 h of pre-hydration in humid chambers. Viable and dead pollen were best discriminated at around the same time of pollen pre-hydration, suggesting that high humidity levels are required for hazelnut pollen to maintain its functionality. Altogether, our results detail the value of impedance flow cytometry for high throughput phenotyping of hazelnut pollen. Further research is required to clarify the causes of pollen sterility in hazelnut, to confirm the role of reciprocal chromosome translocations and to investigate its effects on plant productivity.

Quantitative methods in microscopy to assess pollen viability in different plant taxa

High-quality pollen is a prerequisite for plant reproductive success. Pollen viability and sterility can be routinely assessed using common stains and manual microscope examination, but with low overall statistical power. Current automated methods are primarily directed towards the analysis of pollen sterility, and high throughput solutions for both pollen viability and sterility evaluation are needed that will be consistent with emerging biotechnological strategies for crop improvement. Our goal is to refine established labelling procedures for pollen, based on the combination of fluorescein (FDA) and propidium iodide (PI), and to develop automated solutions for accurately assessing pollen grain images and classifying them for quality. We used open-source software programs (CellProfiler, CellProfiler Analyst, Fiji and R) for analysis of images collected from 10 pollen taxa labelled using FDA/PI. After correcting for image background noise, pollen grain images were examined for quality employing thresholding and segmentation. Supervised and unsupervised classification of per-object features was employed for the identification of viable, dead and sterile pollen. The combination of FDA and PI dyes was able to differentiate between viable, dead and sterile pollen in all the analysed taxa. Automated image analysis and classification significantly increased the statistical power of the pollen viability assay, identifying more than 75,000 pollen grains with high accuracy (R² = 0.99) when compared to classical manual counting. Overall, we provide a comprehensive set of methodologies as baseline for the automated assessment of pollen viability using fluorescence microscopy, which can be combined with manual and mechanized imaging systems in fundamental and applied research on plant biology. We also supply the complete set of pollen images (the FDA/PI pollen dataset) to the scientific community for future research.

Investigating the Use of Impedance Flow Cytometry for Classifying the Viability State of E. coli

Bacteria detection, counting and analysis is of great importance in several fields. When viability plays a major role in decision making, the counting of colony-forming units grown on agar plates remains the gold standard. However, because plate counts depend on the growth of the bacteria, it is a slow procedure and only works with culturable species. Impedance flow cytometry (IFC) is a promising technology for particle detection, counting and characterization. It relies on the perturbation of an electric field by particles flowing through a microfluidic channel. The perturbation is directly related to the electrical properties of the particles, and therefore provides information about their composition and structure. In this work we investigate whether IFC can be used to differentiate viable cells from inactivated cells. Our findings demonstrate that the specific viability state of the bacteria has to be considered, but that with proper characterization thresholds, IFC can be used to classify bacterial viability states. By using three different inactivation methods-ethanol, heat and autoclavation-we have been able to show that the impedance response of Escherichia coli depends on its viability state, but that the specific response depends on the inactivation method. With these findings we expect to be able to optimize IFC for more reliable bacteria detection and counting in the future.

Impedance flow cytometry allows the early prediction of embryo yields in wheat (Triticum aestivum L.) microspore cultures

Haplomethods are key biotechnological tools that make it possible to rapidly produce perfectly homozygous lines, speeding up plant breeding programs. Under specific stress conditions, microspores are reprogrammed toward sporophytic pathways, leading to embryo formation. Various endogenous and exogenous factors affect embryo yield in androgenesis, so the improvement of androgenesis efficiency requires the development of early, reliable and robust reactivity markers. During the last decade, numerous cytological, cellular and biochemical approaches were carried out to finely characterize microspore development and fate during androgenesis. However, the different available markers are often species-dependent, and their development and application are time-consuming and cumbersome. In this study, we show the suitable use of impedance flow cytometry (IFC) to develop new robust, reliable and strong markers of androgenesis reactivity in wheat, leading to: (i) routine monitoring of the viability of heterogeneous cell cultures; (ii) quick and simple evaluation of stress treatment efficiency; and (iii) early prediction of embryo yields from microspore suspensions. IFC can therefore provide the fine characterization of all of the microspore developmental pathways that occur in a cell suspension, for embryogenic microspores as well as pollen-like microspores. IFC technology has become a very useful tool to track and characterize wheat microspores in androgenesis, but can also be adapted to other species and other in vitro cell culture systems.

An improved pollen number counting method using a cell counter and mesh columns

BACKGROUND

The determination of pollen number is important in evolutionary, agricultural, and medical studies. Tree species of the Cupressaceae family cause serious pollinosis worldwide. Although Japanese cedar (Cryptomeria japonica) is the most important forestry species in Japan, it is also the biggest cause of pollinosis in the country. Japanese cedar trees have been selected for growth speed and superior morphological traits and then cloned. These clones may vary in their pollen production, but there has been little research on how many pollen grains are produced by a single male strobilus (flower). A recently reported method for counting pollen number with a cell counter was applicable to Arabidopsis species and wheat, but was not suitable for Japanese cedar because the strobilus does not open with heating (e.g. 60 °C, overnight).

RESULTS

Here, we report an improved pollen counting method for Japanese cedar using a precise and rapid cell counter in combination with home-made mesh columns. The male strobilus was gently crushed using a pestle. Large and small debris were then removed using 100- and 20-μm mesh columns, respectively. We successfully detected pollen sizes and numbers that differed between two clones using this method.

CONCLUSIONS

This improved method is not only suitable for counting pollen from Japanese cedar, but could also be applied to other species of the Cupressaceae family with hard scale tissue covering the pollen. Moreover, this method could be applied to a broader range of plant species, such as wheat, because there is no need to wait for anthesis and debris can be removed efficiently.

Nanocytometer for smart analysis of peripheral blood and acute myeloid leukemia: a pilot study

We realize an ultracompact nanocytometer for real-time impedimetric detection and classification of subpopulations of living cells. Nanoscopic nanowires in a microfluidic channel act as nanocapacitors and measure in real time the change of the amplitude and phase of the output voltage and, thus, the electrical properties of living cells. We perform the cell classification in the human peripheral blood (PBMC) and demonstrate for the first time the possibility to discriminate monocytes and subpopulations of lymphocytes in a label-free format. Further, we demonstrate that the PBMC of acute myeloid leukemia and healthy samples grant the label free identification of the disease. Using the algorithm based on machine learning, we generated specific data patterns to discriminate healthy donors and leukemia patients. Such a solution has the potential to improve the traditional diagnostics approaches with respect to the overall cost and time effort, in a label-free format, and restrictions of the complex data analysis.

Low-Frequency Impedance-Based Cell Discrimination Considering Ion Transport Model in Cell Suspension

Low-frequency impedance-based (LFI) cell discrimination as a novel non-destructive and non-invasive cell discrimination is proposed. LFI cell discrimination discriminates the cell type by considering an ion transport model in cell suspension. Ion transport model in cell suspension is constructed on the basis of Fick's laws of diffusion in the extracellular region under ion permeability P which represents the characteristics of cell type. P is achieved using the ion transport model equation through an iterative curve fitting to an ion concentration in extracellular region obtained from low-frequency impedance which is assumed to be linearly related to the ion concentration in extracellular region. In experiment, the electrical impedance spectra from the frequency of 200 kHz to 2.0 MHz are measured over time during producing ions from intracellular region to extracellular one in cell suspension using an impedance analyzer and an interdigitated array electrode system. As a target cell type, two different cell types based on Medical Research Council 5 (MRC-5), which are different in intracellular component are used. The curve fitting is performed for the low-frequency impedance at 200 kHz at which impedance reflects the ion concentration in extracellular region in order to obtain P of each cell type. As a result, each cell type has its own P. The proposed LFI cell discrimination successfully discriminates the cell type.

Assessment of Pollen Viability for Wheat

Wheat sheds tricellular short-lived pollen at maturity. The identification of viable pollen required for high seed set is important for breeders and conservators. The present study aims to evaluate and improve pollen viability tests and to identify factors influencing viability of pollen. In fresh wheat pollen, sucrose was the most abundant soluble sugar (90%). Raffinose was present in minor amounts. However, the analyses of pollen tube growth on 112 liquid and 45 solid media revealed that solid medium with 594 mM raffinose, 0.81 mM H3BO3, 2.04 mM CaCl2 at pH5.8 showed highest pollen germination. Partly or complete substitution of raffinose by sucrose, maltose, or sorbitol reduced in vitro germination of the pollen assuming a higher metabolic efficiency or antioxidant activity of raffinose. In vitro pollen germination varied between 26 lines (P < 0.001); between winter (15.3 ± 8.5%) and spring types (30.2 ± 13.3%) and was highest for the spring wheat TRI 2443 (50.1 ± 20.0%). Alexander staining failed to discriminate between viable, fresh pollen, and non-viable pollen inactivated by ambient storage for >60 min. Viability of fresh wheat pollen assessed by fluorescein diacetate (FDA) staining and impedance flow (IF) cytometry was 79.2 ± 4.2% and 88.1 ± 2.7%, respectively; and, when non-viable, stored pollen was additionally tested, it correlated at r = 0.54 (P < 0.05) and r = 0.67 (P < 0.001) with in vitro germination, respectively. When fresh pollen was used to assess the pollen viability of 19 wheat, 25 rye, 11 barley, and 4 maize lines, correlations were absent and in vitro germination was lower for rye (11.7 ± 8.5%), barley (6.8 ± 4.3%), and maize (2.1 ± 1.8%) pollen compared to wheat. Concluding, FDA staining and IF cytometry are used for a range of pollen species, whereas media for in vitro pollen germination require specific adaptations; in wheat, a solid medium with raffinose was chosen. On adapted media, the pollen tube growth can be exactly analyzed whereas results achieved by FDA staining and IF cytometry are higher and may overestimate pollen tube growth. Hence, as the exact viability and fertilization potential of a larger pollen batch remains elusive, a combination of pollen viability tests may provide reasonable indications of the ability of pollen to germinate and grow.

Accelerating Breeding for Heat Tolerance in Tomato (Solanum lycopersicum L.): An Integrated Approach

Heat stress is a major limiting factor for crop productivity. Tomato is highly sensitive to heat stress, which can result in a total yield loss. To adapt to current and future heat stress, there is a dire need to develop heat tolerant cultivars. Here, we review recent attempts to improve screening for heat tolerance and to exploit genetic and genomic resources in tomatoes. We provide key factors related to phenotyping environments and traits (morphological, physiological, and metabolic) to be considered to identify and breed thermo-tolerant genotypes. There is significant variability in tomato germplasm that can be harnessed to breed for thermo-tolerance. Based on our review, we propose that the use of advanced backcross populations and chromosome segments substitution lines is the best means to exploit variability for heat tolerance in non-cultivated tomato species. We applied a meta quantitative trait loci (MQTL) analysis on data from four mapping experiments to co-localize QTL associated with heat tolerance traits (e.g., pollen viability, number of pollen, number of flowers, style protrusion, style length). The analysis revealed 13 MQTL of which 11 were composed of a cluster of QTL. Overall, there was a reduction of about 1.5-fold in the confidence interval (CI) of the MQTL (31.82 cM) compared to the average CI of individual QTL (47.4 cM). This confidence interval is still large and additional mapping resolution approaches such as association mapping and multi-parent linkage mapping are needed. Further investigations are required to decipher the genetic architecture of heat tolerance surrogate traits in tomatoes. Genomic selection and new breeding techniques including genome editing and speed breeding hold promise to fast-track development of improved heat tolerance and other farmer- and consumer-preferred traits in tomatoes.

Reproductive Cold Stress Tolerance in Sorghum F1 Hybrids is a Heterotic Trait

The sensitivity of sorghum to pre-flowering cold stress, resulting in reduced pollen viability and poor seed set, is a major constraint for expanding growing areas into higher altitudes and latitudes. Nevertheless, compared to juvenile cold tolerance, reproductive cold tolerance in sorghum has received much less attention so far, and very little is known about its inheritance in F1-hybrids. We have composed a representative factorial (n = 49 experimental F1-hybrids) for a comprehensive study on heterosis and combining ability for crucial tolerance traits as spikelet fertility (panicle harvest index), seed yield and pollen viability, using field trials in stress- and control environments in Germany and Mexico as well as climate chamber experiments. Our results indicate a heterotic and rather dominant inheritance of reproductive cold tolerance in sorghum, with strong effects of female general combining ability (GCA) on F1-hybrid performance in our material. These findings, together with the comparatively low contribution of specific combining ability (SCA) effects and high heritability estimates, suggest that robust and efficient enhancement of reproductive cold tolerance is feasible via hybrid breeding.

Rapid determination of general cell status, cell viability, and optimal harvest time in eukaryotic cell cultures by impedance flow cytometry

The determination of cell viability is essential to many areas of life sciences and biotechnology. Typically, cell viability measurements are based on the optical analysis of stained cells, which requires additional labeling steps and is hard to implement online. Frequency-dependent impedance flow cytometry (IFC) provides a label-free, fast, and reliable alternative to determine cell viability at the single cell level based on the Coulter principle. Here, we describe the application of IFC to eukaryotic cell cultures and compare the results to commonly used staining methods. Yeast cell parameters were assessed in normal and heat-inactivated cells as well as in alcoholic fermentation and long-term batch cultures providing a precise and fast determination of the cell viability and further quantitative measures of the cell culture status. As an important new application, we have investigated recombinant protein production in the widely used baculovirus insect cell expression system. The IFC analysis revealed the presence of a subpopulation of cells, which correlates with the protein expression yield, but it is not detectable with conventional optical cell counters. We tentatively identify this subpopulation as cells in the late phase of infection. Their detection can serve as a predictor for the optimal time point of harvest. The IFC technique should be generally applicable to many eukaryotic cell cultures in suspension, possibly also implemented online.

Direct analysis of pollen fitness by flow cytometry: implications for pollen response to stress

Sexual reproduction in flowering plants depends on the fitness of the male gametophyte during fertilization. Because pollen development is highly sensitive to hot and cold temperature extremes, reliable methods to evaluate pollen viability are important for research into improving reproductive heat stress (HS) tolerance. Here, we describe an approach to rapidly evaluate pollen viability using a reactive oxygen species (ROS) probe dichlorodihydrofluorescein diacetate (i.e. H₂ DCFDA-staining) coupled with flow cytometry. In using flow cytometry to analyze mature pollen harvested from Arabidopsis and tomato flowers, we discovered that pollen distributed bimodally into 'low-ROS' and 'high-ROS' subpopulations. Pollen germination assays following fluorescence-activated cell sorting revealed that the high-ROS pollen germinated with a frequency that was 35-fold higher than the low-ROS pollen, supporting a model in which a significant fraction of a flower's pollen remains in a low metabolic or dormant state even after hydration. The ability to use flow cytometry to quantify ROS dynamics within a large pollen population was shown by dose-dependent alterations in DCF-fluorescence in response to oxidative stress or antioxidant treatments. HS treatments (35°C) increased ROS levels, which correlated with a ~60% reduction in pollen germination. These results demonstrate the potential of using flow cytometry-based approaches to investigate metabolic changes during stress responses in pollen.

Yielding to the image: How phenotyping reproductive growth can assist crop improvement and production

Reproductive organs are the main reason we grow and harvest most plant species as crops, yet they receive less attention from phenotyping due to their complexity and inaccessibility for analysis. This review highlights recent progress towards the quantitative high-throughput phenotyping of reproductive development, focusing on three impactful areas that are pivotal for plant breeding and crop production. First, we look at phenotyping phenology, summarizing the indirect and direct approaches that are available. This is essential for analysis of genotype by environment, and to enable effective management interpretation and agronomy and physiological interventions. Second, we look at pollen development and production, in addition to anther characteristics, these are critical points of vulnerability for yield loss when stress occurs before and during flowering, and are of particular interest for hybrid technology development. Third, we elaborate on phenotyping yield components, indirectly or directly during the season, with a numerical or growth related approach and post-harvest processing. Finally, we summarise the opportunities and challenges ahead for phenotyping reproductive growth and their feasibility and impact, with emphasis on plant breeding applications and targeted yield increases.

Using Plant Phenomics to Exploit the Gains of Genomics

Agricultural scientists face the dual challenge of breeding input-responsive, widely adoptable and climate-resilient varieties of crop plants and developing such varieties at a faster pace. Integrating the gains of genomics with modern-day phenomics will lead to increased breeding efficiency which in turn offers great promise to develop such varieties rapidly. Plant phenotyping techniques have impressively evolved during the last two decades. The low-cost, automated and semi-automated methods for data acquisition, storage and analysis are now available which allow precise quantitative analysis of plant structure and function; and genetic dissection of complex traits. Appropriate plant types can now be quickly developed that respond favorably to low input and resource-limited environments and address the challenges of subsistence agriculture. The present review focuses on the need of systematic, rapid, minimal invasive and low-cost plant phenotyping. It also discusses its evolution to modern day high throughput phenotyping (HTP), traits amenable to HTP, integration of HTP with genomics and the scope of utilizing these tools for crop improvement.

Coplanar electrode microfluidic chip enabling accurate sheathless impedance cytometry

Microfluidic impedance cytometry offers a simple non-invasive method for single-cell analysis. Coplanar electrode chips are especially attractive due to ease of fabrication, yielding miniaturized, reproducible, and ultimately low-cost devices. However, their accuracy is challenged by the dependence of the measured signal on particle trajectory within the interrogation volume, that manifests itself as an error in the estimated particle size, unless any kind of focusing system is used. In this paper, we present an original five-electrode coplanar chip enabling accurate particle sizing without the need for focusing. The chip layout is designed to provide a peculiar signal shape from which a new metric correlating with particle trajectory can be extracted. This metric is exploited to correct the estimated size of polystyrene beads of 5.2, 6 and 7 μm nominal diameter, reaching coefficient of variations lower than the manufacturers' quoted values. The potential impact of the proposed device in the field of life sciences is demonstrated with an application to Saccharomyces cerevisiae yeast.

Impedance Flow Cytometry as a Tool to Analyze Microspore and Pollen Quality

Analyzing pollen quality in an efficient and reliable manner is of great importance to the industries involved in seed and fruit production, plant breeding, and plant research. Pollen quality parameters, viability and germination capacity, are analyzed by various staining methods or by in vitro germination assays, respectively. These methods are time-consuming, species-dependent, and require a lab environment. Furthermore, the obtained viability data are often poorly related to in vivo pollen germination and seed set. Here, we describe a quick, label-free method to analyze pollen using microfluidic chips inserted into an impedance flow cytometer (IFC). Using this approach, pollen quality parameters are determined by a single measurement in a species-independent manner. The advantage of this protocol is that pollen viability and germination can be analyzed quickly by a reliable and standardized method.