Efficacy of pyrazinoic acid dry powder aerosols in resolving necrotic and non-necrotic granulomas in a guinea pig model of tuberculosis

The Pharmacokinetics of CPZEN-45, a Novel Anti-Tuberculosis Drug, in Guinea Pigs

CPZEN-45 is a novel compound with activity against drug-susceptible and drug-resistant tuberculosis (TB). The present study was undertaken to determine the best dose and dosing regimen of inhalable CPZEN-45 powders to use in efficacy studies with TB-infected guinea pigs. The disposition of CPZEN-45 after intravenous, subcutaneous (SC), and direct pulmonary administration (INS) was first determined to obtain their basal pharmacokinetic (PK) parameters. Then, the disposition of CPZEN-45 powders after passive inhalation using consecutive and sequential doses was evaluated. Plasma concentration versus time curves and PK parameters indicated that the absorption of CPZEN-45 after INS was faster than after SC administration (Ka = 12.94 ± 5.66 h-1 and 1.23 ± 0.55 h-1, respectively), had a longer half-life (2.06 ± 1.01 h versus 0.76 ± 0.22 h) and had higher bioavailability (67.78% and 47.73%, respectively). The plasma concentration versus time profiles and the lung tissue concentration at the end of the study period were not proportional to the dose size after one, two, and three consecutive passive inhalation doses. Three sequential passive inhalation doses maintained therapeutic concentration levels in plasma and lung tissue for a longer time than three consecutive doses (10 h vs. 3 h, respectively). Future studies to evaluate the efficacy of inhaled CPZEN-45 powders should employ sequential doses of the powder, with one nominal dose administered to animals three times per day.

Pharmacokinetic Considerations for Optimizing Inhaled Spray-Dried Pyrazinoic Acid Formulations

Tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb), remains a leading cause of death with 1.6 million deaths worldwide reported in 2021. Oral pyrazinamide (PZA) is an integral part of anti-TB regimens, but its prolonged use has the potential to drive the development of PZA-resistant Mtb. PZA is converted to the active moiety pyrazinoic acid (POA) by the Mtb pyrazinamidase encoded by pncA, and mutations in pncA are associated with the majority of PZA resistance. Conventional oral and parenteral therapies may result in subtherapeutic exposure in the lung; hence, direct pulmonary administration of POA may provide an approach to rescue PZA efficacy for treating pncA-mutant PZA-resistant Mtb. The objectives of the current study were to (i) develop novel dry powder POA formulations, (ii) assess their feasibility for pulmonary delivery using physicochemical characterization, (iii) evaluate their pharmacokinetics (PK) in the guinea pig model, and (iv) develop a mechanism-based pharmacokinetic model (MBM) using in vivo PK data to select a formulation providing adequate exposure in epithelial lining fluid (ELF) and lung tissue. We developed three POA formulations for pulmonary delivery and characterized their PK in plasma, ELF, and lung tissue following passive inhalation in guinea pigs. Additionally, the PK of POA following oral, intravenous, and intratracheal administration was characterized in guinea pigs. The MBM was used to simultaneously model PK data following administration of POA and its formulations via the different routes. The MBM described POA PK well in plasma, ELF, and lung tissue. Physicochemical analyses and MBM predictions suggested that POA maltodextrin was the best among the three formulations and an excellent candidate for further development as it has: (i) the highest ELF-to-plasma exposure ratio (203) and lung tissue-to-plasma exposure ratio (30.4) compared with POA maltodextrin and leucine (75.7/16.2) and POA leucine salt (64.2/19.3) and (ii) the highest concentration in ELF (CmaxELF: 171 nM) within 15.5 min, correlating with a fast transfer into ELF after pulmonary administration (KPM: 22.6 1/h). The data from the guinea pig allowed scaling, using the MBM to a human dose of POA maltodextrin powder demonstrating the potential feasibility of an inhaled product.

Pharmacokinetic considerations for optimizing inhaled spray-dried pyrazinoic acid formulations

Tuberculosis (TB), caused by Mycobacterium tuberculosis ( Mtb ), remains a leading cause of death with 1.6 million deaths worldwide reported in 2021. Oral pyrazinamide (PZA) is an integral part of anti-TB regimens, but its prolonged use has the potential to drive development of PZA resistant Mtb . PZA is converted to the active moiety pyrazinoic acid (POA) by the Mtb pyrazinamidase encoded by pncA , and mutations in pncA are associated with the majority of PZA resistance. Conventional oral and parenteral therapies may result in subtherapeutic exposure in the lung, hence direct pulmonary administration of POA may provide an approach to rescue PZA efficacy for treating pncA- mutant PZA-resistant Mtb . The objectives of the current study were to i) develop novel dry powder POA formulations ii) assess their feasibility for pulmonary delivery using physicochemical characterization, iii) evaluate their pharmacokinetics (PK) in the guinea pig model and iv) develop a mechanism based pharmacokinetic model (MBM) using in vivo PK data to select a formulation providing adequate exposure in epithelial lining fluid (ELF) and lung tissue. We developed three POA formulations for pulmonary delivery and characterized their PK in plasma, ELF, and lung tissue following passive inhalation in guinea pigs. Additionally, the PK of POA following oral, intravenous and intratracheal administration was characterized in guinea pigs. The MBM was used to simultaneously model PK data following administration of POA and its formulations via the different routes. The MBM described POA PK well in plasma, ELF and lung tissue. Physicochemical analyses and MBM predictions suggested that POA maltodextrin was the best among the three formulations and an excellent candidate for further development as it has: (i) the highest ELF-to-plasma exposure ratio (203) and lung tissue-to-plasma exposure ratio (30.4) compared with POA maltodextrin and leucine (75.7/16.2) and POA leucine salt (64.2/19.3); (ii) the highest concentration in ELF ( Cmac ELF : 171 nM) within 15.5 minutes, correlating with a fast transfer into ELF after pulmonary administration ( k PM : 22.6 1/h). The data from the guinea pig allowed scaling, using the MBM to a human dose of POA maltodextrin powder demonstrating the potential feasibility of an inhaled product.

Table of Contents TOC/Abstract Graphic

A long-acting formulation of rifabutin is effective for prevention and treatment of Mycobacterium tuberculosis

Tuberculosis (TB) is a communicable disease caused by Mycobacterium tuberculosis (Mtb) and is a major cause of morbidity and mortality. Successful treatment requires strict adherence to drug regimens for prolonged periods of time. Long-acting (LA) delivery systems have the potential to improve adherence. Here, we show the development of LA injectable drug formulations of the anti-TB drug rifabutin made of biodegradable polymers and biocompatible solvents that solidifies after subcutaneous injection. Addition of amphiphilic compounds increases drug solubility, allowing to significantly increase formulation drug load. Solidified implants have organized microstructures that change with formulation composition. Higher drug load results in smaller pore size that alters implant erosion and allows sustained drug release. The translational relevance of these observations in BALB/c mice is demonstrated by (1) delivering high plasma drug concentrations for 16 weeks, (2) preventing acquisition of Mtb infection, and (3) clearing acute Mtb infection from the lung and other tissues.

Spray-dried lactose-leucine microparticles for pulmonary delivery of antimycobacterial nanopharmaceuticals

Pulmonary delivery of nanocarriers for novel antimycobacterial compounds is challenging because the aerodynamic properties of nanomaterials are sub-optimal for such purposes. Here, we report the development of dry powder formulations for nanocarriers containing benzothiazinone 043 (BTZ) or levofloxacin (LVX), respectively. The intricacy is to generate dry powder aerosols with adequate aerodynamic properties while maintaining both nanostructural integrity and compound activity until reaching the deeper lung compartments. Microparticles (MPs) were prepared using vibrating mesh spray drying with lactose and leucine as approved excipients for oral inhalation drug products. MP morphologies and sizes were measured using various biophysical techniques including determination of geometric and aerodynamic mean sizes, X-ray diffraction, and confocal and focused ion beam scanning electron microscopy. Differences in the nanocarriers’ characteristics influenced the MPs’ sizes and shapes, their aerodynamic properties, and, hence, also the fraction available for lung deposition. Spay-dried powders of a BTZ nanosuspension, BTZ-loaded silica nanoparticles (NPs), and LVX-loaded liposomes showed promising respirable fractions, in contrast to zirconyl hydrogen phosphate nanocontainers. While the colloidal stability of silica NPs was improved after spray drying, MPs encapsulating either BTZ nanosuspensions or LVX-loaded liposomes showed the highest respirable fractions and active pharmaceutical ingredient loads. Importantly, for the BTZ nanosuspension, biocompatibility and in vitro uptake by a macrophage model cell line were improved even further after spray drying.

One Size Fits All? Not in In Vivo Modeling of Tuberculosis Chemotherapeutics

Tuberculosis (TB) remains a global health problem despite almost universal efforts to provide patients with highly effective chemotherapy, in part, because many infected individuals are not diagnosed and treated, others do not complete treatment, and a small proportion harbor Mycobacterium tuberculosis (Mtb) strains that have become resistant to drugs in the standard regimen. Development and approval of new drugs for TB have accelerated in the last 10 years, but more drugs are needed due to both Mtb's development of resistance and the desire to shorten therapy to 4 months or less. The drug development process needs predictive animal models that recapitulate the complex pathology and bacterial burden distribution of human disease. The human host response to pulmonary infection with Mtb is granulomatous inflammation usually resulting in contained lesions and limited bacterial replication. In those who develop progressive or active disease, regions of necrosis and cavitation can develop leading to lasting lung damage and possible death. This review describes the major vertebrate animal models used in evaluating compound activity against Mtb and the disease presentation that develops. Each of the models, including the zebrafish, various mice, guinea pigs, rabbits, and non-human primates provides data on number of Mtb bacteria and pathology resolution. The models where individual lesions can be dissected from the tissue or sampled can also provide data on lesion-specific bacterial loads and lesion-specific drug concentrations. With the inclusion of medical imaging, a compound's effect on resolution of pathology within individual lesions and animals can also be determined over time. Incorporation of measurement of drug exposure and drug distribution within animals and their tissues is important for choosing the best compounds to push toward the clinic and to the development of better regimens. We review the practical aspects of each model and the advantages and limitations of each in order to promote choosing a rational combination of them for a compound's development.

Designing inhalable metal organic frameworks for pulmonary tuberculosis treatment and theragnostics via spray drying

Inhalable metal organic framework (MOF) aerosols have been developed via spray drying as a therapy for multi-drug resistant (MDR) tuberculosis (TB). The CuPOA₂ (pyrazinoate acid) MOFs can be tailored to exhibit a respirable mass median aerodynamic diameter (MMAD) of 2.6 μm. This method is repeated to manufacture Gd_0.1Cu_0.9(POA)₂ MOFs for inhalable theragnostics.

Why Wait? The Case for Treating Tuberculosis with Inhaled Drugs

The discovery of drugs to treat tuberculosis (TB) was a major medical milestone in the twentieth century. However, from the outset, drug resistance was observed. Currently, of the 10 million people that exhibit TB symptoms each year, 450,000 have multidrug or extensively drug resistant (MDR or XDR) TB. While greater understanding of the host and pathogen (Mycobacterium tuberculosis, Mtb) coupled with scientific ingenuity will lead to new drugs and vaccines, in the meantime 4000 people die daily from TB. Thus, efforts to improve existing TB drugs should also be prioritized. Improved efficacy and decreased dose and associated toxicity of existing drugs would translate to greater compliance, life expectancy and quality of life of Mtb infected individuals. One potential strategy to improve existing drugs is to deliver them by inhalation as aerosols to the lung, the primary site of Mtb infection. Inhaled drugs are used for other pulmonary diseases, but they have yet to be utilized for TB. Inhaled therapies for TB represent an untapped opportunity that the pharmaceutical, clinical and regulatory communities should consider.