Assessment of the ergonomic risk from saddle and conventional seats in dentistry: A systematic review and meta-analysis

Developmental coordination disorder in preterm children: A systematic review and meta-analysis

This study aimed to review the prevalence of developmental coordination disorder (DCD) in individuals born preterm and systematically explore this prevalence according to gestational age and different assessment cut-offs and compare it to full-term peers. The eligibility criteria were observational and experimental studies reporting the prevalence of DCD in preterm individuals. A systematic search was performed in databases from inception until March 2022. Two independent reviewers performed the selection. Study quality assessment was performed using the checklists from Joanna Briggs Institute (JBI). Data analysis was performed on Excel and Review Manager Software 5.4. Among the 1774 studies identified, 32 matched the eligibility criteria. The pooled estimate rate of the DCD rate in preterm was 21% (95% confidence interval [CI] 17.8-24.3). The estimate rates were higher as gestational age decreased, and preterm children are two times more likely to have DCD than their full-term peers risk ratio (RR) 2.2 (95% CI 1.77-2.79). The limitation was high heterogeneity between studies; the assessment tools, cut-off points and age at assessment were diverse. This study provided evidence that preterm children are at higher risk for DCD than full-term children, and the risks increased as gestational age decreased.

Work-related musculoskeletal disorders in oral health professionals: an umbrella review protocol

OBJECTIVE

The objective of this review is to synthesize the evidence on the prevalence, incidence, risk factors, and preventive and management interventions for work-related musculoskeletal disorders (MSD) in oral health professionals.

INTRODUCTION

Oral health professionals face a considerable risk of developing work-related MSD due to the nature of their work. These disorders can lead to loss of employment, reduced job quality, increased occupational injuries, and early retirement. They can also lead to significant financial burdens for employers and society.

INCLUSION CRITERIA

This umbrella review will include systematic reviews and meta-analyses that have oral health professionals as a population group and address at least one of the following topics: the prevalence or incidence, risk factors, and the efficiency or effectiveness of interventions for the prevention or management of work-related MSD.

METHODS

A systematic search will be conducted across CINAHL Complete (EBSCOhost), Dentistry and Oral Sciences Source (EBSCOhost), MEDLINE (EBSCOhost), Cochrane Library (OVID), Scopus, PsycINFO (Ovid), AMED Allied and Complementary Medicine (Ovid), Epistemonikos, Ergonomics Abstracts Online (EBSCOhost), and Google Scholar (first 200 articles). The search will be limited to articles published in English, with no restrictions on geographical location. Two independent reviewers will screen the titles and abstracts against the inclusion criteria. The studies will be assessed using the JBI critical appraisal instrument for systematic reviews and research syntheses, and data will be extracted from each study using a modified version of the JBI data extraction tool. The GRADE approach will be used to rate the overall quality and strength of the evidence.

REVIEW REGISTRATION

PROSPERO CRD42023388779.

Transparency as a Means to Analyse the Impact of Inertial Sensors on Users during the Occupational Ergonomic Assessment: A Systematic Review

The literature has yielded promising data over the past decade regarding the use of inertial sensors for the analysis of occupational ergonomics. However, despite their significant advantages (e.g., portability, lightness, low cost, etc.), their widespread implementation in the actual workplace has not yet been realized, possibly due to their discomfort or potential alteration of the worker's behaviour. This systematic review has two main objectives: (i) to synthesize and evaluate studies that have employed inertial sensors in ergonomic analysis based on the RULA method; and (ii) to propose an evaluation system for the transparency of this technology to the user as a potential factor that could influence the behaviour and/or movements of the worker. A search was conducted on the Web of Science and Scopus databases. The studies were summarized and categorized based on the type of industry, objective, type and number of sensors used, body parts analysed, combination (or not) with other technologies, real or controlled environment, and transparency. A total of 17 studies were included in this review. The Xsens MVN system was the most widely used in this review, and the majority of studies were classified with a moderate level of transparency. It is noteworthy, however, that there is a limited and worrisome number of studies conducted in uncontrolled real environments.

Transition between preclinical and clinical training: Perception of dental students regarding the adoption of ergonomic principles

OBJECTIVE

This study aimed to evaluate the perceptions of third-year dental students regarding the application of ergonomic principles in the transition between preclinical and clinical training in Restorative Dentistry.

METHODS

We conducted a qualitative observational cross-sectional study. The sample consisted of forty-six third-year dental students at São Paulo State University (Unesp), School of Dentistry, Araraquara. Data was collected using an individual interview recorded on a digital voice recorder. A script containing questions related to the process of adaptation of students to clinical care with a view to ergonomic work posture was used. Data analysis was based on the quali-quantitative technique of Discourse of the Collective Subject (DCS), using Qualiquantisoft®.

RESULTS

Most students (97.80%) perceived the need for an adaptation period in the transition from the preclinic to the clinic regarding ergonomic posture requirements; a part of them (45.65%) claimed that they still could not adapt, primarily due to the difference between the laboratory and clinic in the workstation (50.00%). Some students suggested longer preclinical training in a clinical environment to facilitate this transition (21.74%). The dental stool (32.60%) and the dental chair (21.74%) were the external factors that contributed most to making this transition difficult. The difficulty of the restorative dentistry procedure (10.87%) also interfered with posture. Additionally, the most challenging ergonomic posture requirements in the transition period were maintaining 30 to 40 cm between the patient's mouth and operator's eyes (45.65%), positioning the patient in the dental chair correctly (15.22%), and working with the elbows close to the body (15.22%).

CONCLUSION

Most students perceived the need for an adaptation period in the preclinical transition to the clinic, attributing difficulties to adopt the ergonomic posture requirements, to use the workstation and to perform the procedures on real patients.

Prevention of work-related musculoskeletal disorders among dental professionals: A scoping review

BACKGROUND: Musculoskeletal disorders (MSDs) are highly prevalent among dental professionals. Studies examining the prevention of dental work-related MSDs have been completed globally. OBJECTIVE: To identify and evaluate the available evidence regarding MSD prevention in dental practice, and to identify knowledge gaps. METHODS: An electronic search was conducted across multiple scientific databases. Identified articles were assessed according to inclusion/exclusion criteria. Systematic reviews, interventions and published expert opinion were included. RESULTS: Five systematic reviews, 27 intervention studies and 21 expert opinion articles were included. There was overall consensus that use of ergonomic equipment is beneficial in MSD prevention. Knowledge gaps identified included: a lack of systematic reviews on the role of exercise and therapy in MSD prevention; a lack of high-quality intervention studies; a lack of research in general outside of ergonomic equipment use. Expert opinion articles have been published despite a lack of dental-specific research. CONCLUSIONS: Whilst more robust research is required, current evidence supports the use of optical enhancement, saddle chairs, and wide-diameter silicone-handled instruments in MSD prevention. Knowledge gaps were identified relating to the use of exercise, therapy, and education in the prevention of dental work-related MSDs. Further research is required, specifically high-quality intervention studies.

Automatic real-time occupational posture evaluation and select corresponding ergonomic assessments

The objective is to develop a system to automatically select the corresponding assessment scales and calculate the score of the risk based on the joint angle information obtained from the imaged process (OpenPose) via image-based motion capture technology. Current occupational assessments, for example, REBA, RULA, and OWAS were used to evaluate the risk of musculoskeletal disorders. However, the assessment result would not be reported immediately. Introducing real-time occupational assessments in different working environments will be helpful for occupational injury prevention. In this study, the decision tree was developed to select the most appropriate assessment method according to the joint angles derived by OpenPose image process. Fifteen operation videos were tested and these videos can be classified into six types including maintenance, handling, assembly, cleaning, office work, and driving. The selected ergonomic assessment method by our developed decision tree in each condition are consistent with the recommendation of the Labour Research Institute. Moreover, the high-risk posture could be identified immediately and provide to the inspector for further evaluation on this posture rather than the whole operation period. This approach provides a quick inspection of the operation movements to prevent musculoskeletal injuries and enhances the application of the scale assessment method in different industrial environments.

C. Mani K, Sadeghi Naeini H, Mohd Suadi Nata DH. Effectiveness of lumbar support with built-in massager system on spinal angle profiles among high-powered traffic police motorcycle riders: A randomised controlled trial

Traffic police riders are exposed to prolonged static postures causing significant angular deviation of the musculoskeletal, including the lumbar angle (L1-L5). This postural alteration contributes to awkward posture, musculoskeletal disorders and spinal injury, especially in the lower back area, as it is one of the most severe modern diseases nowadays. Thus, the study aimed to evaluate the effect of lumbar support with a built-in massager system on spinal angle profiles among traffic police riders. A randomised controlled trial (pre-testpost-test control design) was used to assess spinal angle pattern while riding the high-powered motorcycle for 20 minutes. Twenty-four traffic police riders were randomly selected to participate and 12 riders were assigned to the control group and 12 riders to the experimental group. The pre-test and post-test were conducted at a one-week interval. Each participant was required to wear a TruPosture Smart Shirt (to monitor spinal posture). The TruPosture Apps recorded the spinal angle pattern. The data indicated that the police riders using motorcycle seat with lumbar support and built-in massager system showed a huge improvement in maintaining posture which only involves slight spinal angle deviation changes from the spinal reference angle throughout the 20 minutes ride. The data collected then were analysed using the Mann-Whitney test and Wilcoxon signed-ranked test to verify a statistically significant difference between and within the control and experimental groups. There were significant differences in all sensors between the control group and experimental groups (p<0.05) and within the experimental group. According to the findings, it can be said that the ergonomic intervention prototype (lumbar support with built-in massager system) successfully helps to maintain and improve the natural curve of the spinal posture. This indirectly would reduce the risk of developing musculoskeletal disorders and spinal injury among traffic police riders.

Application of mismatch equations in dynamic seating designs

Anthropometry is critical for product and workplace design. Highly prevalent, office work is associated with sedentarism and physical discomfort due to prolonged sitting. Dynamic seating (alternating across sitting, perching, and standing) has been suggested as an alternative to overcome those problems. The current study tested a large sample of anthropometric data for mismatch levels against national and international office furniture standards using dynamic seating as a framework with traditional and perching mismatch equations, applied to three recommended dynamic seating components. Dimensions present in the standards used did not match the majority of the sample. For sitting, seat width and depth individually presented the lowest levels of match, as well as under cumulative fit of all office furniture dimensions. However, these were alleviated when incorporating adjustability. Perching was shown to be generally impeded given commercially-available chair height options. Limitations in state-of-the-art perching equations are discussed, and two new models are proposed as design alternatives. Further research should focus on testing the criteria presented in this research through discomfort and objective measures.