Gridded population mapping for Germany based on building density, height and type from Earth Observation data using census disaggregation and bottom-up estimates

A Method for Extracting High-Resolution Building Height Information in Rural Areas Using GF-7 Data

Building height is important information in disaster management and damage assessment. It is also a key parameter in studies such as population modeling and urbanization. Relatively few studies have been conducted on extracting building height in rural areas using imagery from China's Gaofen-7 satellite (GF-7). In this study, we developed a method combining photogrammetry and deep learning to extract building height using GF-7 data in the rural area of Pingquan in northern China. The deep learning model DELaMa was proposed for digital surface model (DSM) editing based on the Large Mask Inpainting (LaMa) architecture. It not only preserves topographic details but also reasonably predicts the topography inside the building mask. The percentile value of the normalized digital surface model (nDSM) in the building footprint was taken as the building height. The extracted building heights in the study area are highly consistent with the reference building heights measured from the ICESat-2 LiDAR point cloud, with an R2 of 0.83, an MAE of 1.81 m and an RMSE of 2.13 m for all validation buildings. Overall, the proposed method in this paper helps to promote the use of satellite data in large-scale building height surveys, especially in rural areas.

Inferring building height from footprint morphology data

As cities continue to grow globally, characterizing the built environment is essential to understanding human populations, projecting energy usage, monitoring urban heat island impacts, preventing environmental degradation, and planning for urban development. Buildings are a key component of the built environment and there is currently a lack of data on building height at the global level. Current methodologies for developing building height models that utilize remote sensing are limited in scale due to the high cost of data acquisition. Other approaches that leverage 2D features are restricted based on the volume of ancillary data necessary to infer height. Here, we find, through a series of experiments covering 74.55 million buildings from the United States, France, and Germany, it is possible, with 95% accuracy, to infer building height within 3 m of the true height using footprint morphology data. Our results show that leveraging individual building footprints can lead to accurate building height predictions while not requiring ancillary data, thus making this method applicable wherever building footprints are available. The finding that it is possible to infer building height from footprint data alone provides researchers a new method to leverage in relation to various applications.

Unveiling patterns in human dominated landscapes through mapping the mass of US built structures

Built structures increasingly dominate the Earth's landscapes; their surging mass is currently overtaking global biomass. We here assess built structures in the conterminous US by quantifying the mass of 14 stock-building materials in eight building types and nine types of mobility infrastructures. Our high-resolution maps reveal that built structures have become 2.6 times heavier than all plant biomass across the country and that most inhabited areas are mass-dominated by buildings or infrastructure. We analyze determinants of the material intensity and show that densely built settlements have substantially lower per-capita material stocks, while highest intensities are found in sparsely populated regions due to ubiquitous infrastructures. Out-migration aggravates already high intensities in rural areas as people leave while built structures remain - highlighting that quantifying the distribution of built-up mass at high resolution is an essential contribution to understanding the biophysical basis of societies, and to inform strategies to design more resource-efficient settlements and a sustainable circular economy.

High-resolution data and maps of material stock, population, and employment in Austria from 1985 to 2018

High-resolution maps of material stocks in buildings and infrastructures are of key importance for studies of societal resource use (social metabolism, circular economy, secondary resource potentials) as well as for transport studies and land system science. So far, such maps were only available for specific years but not in time series. Even for single years, data covering entire countries with high resolution, or using remote-sensing data are rare. Instead, they often have local extent (e.g., [1]), are lower resolution (e.g., [2]), or are based on other geospatial data (e.g., [3]). We here present data on the material stocks in three types of buildings (commercial and industrial, single- and multifamily houses) and three types of infrastructures (roads, railways, other infrastructures) for a 33-year time series for Austria at a spatial resolution of 30 m. The article also presents data on population and employment in Austria for the same time period, at the same spatial resolution. Data were derived with the same method applied in a recent study for Germany [4].

Empiric recommendations for population disaggregation under different data scenarios

High-resolution population mapping is of high relevance for developing and implementing tailored actions in several fields: From decision making in crisis management to urban planning. Earth Observation has considerably contributed to the development of methods for disaggregating population figures with higher resolution data into fine-grained population maps. However, which method is most suitable on the basis of the available data, and how the spatial units and accuracy metrics affect the validation process is not fully known. We aim to provide recommendations to researches that attempt to produce high-resolution population maps using remote sensing and geospatial information in heterogeneous urban landscapes. For this purpose, we performed a comprehensive experimental research on population disaggregation methods with thirty-six different scenarios. We combined five different top-down methods (from basic to complex, i.e., binary and categorical dasymetric, statistical, and binary and categorical hybrid approaches) on different subsets of data with diverse resolutions and degrees of availability (poor, average and rich). Then, the resulting population maps were systematically validated with a two-fold approach using six accuracy metrics. We found that when only using remotely sensed data the combination of statistical and dasymetric methods provide better results, while highly-resolved data require simpler methods. Besides, the use of at least three relative accuracy metrics is highly encouraged since the validation depends on level and method. We also analysed the behaviour of relative errors and how they are affected by the heterogeneity of the urban landscape. We hope that our recommendations save additional efforts and time in future population mapping.

Population estimation beyond counts-Inferring demographic characteristics

Mapping population distribution at a fine spatial scale is essential for urban studies and planning. Numerous studies, mainly supported by geospatial and statistical methods, have focused primarily on predicting population counts. However, estimating their socio-economic characteristics beyond population counts, such as average age, income, and gender ratio, remains unattended. We enhance traditional population estimation by predicting not only the number of residents in an area, but also their demographic characteristics: average age and the proportion of seniors. By implementing and comparing different machine learning techniques (Random Forest, Support Vector Machines, and Linear Regression) in administrative areas in Singapore, we investigate the use of point of interest (POI) and real estate data for this purpose. The developed regression model predicts the average age of residents in a neighbourhood with a mean error of about 1.5 years (the range of average resident age across Singaporean districts spans approx. 14 years). The results reveal that age patterns of residents can be predicted using real estate information rather than with amenities, which is in contrast to estimating population counts. Another contribution of our work in population estimation is the use of previously unexploited POI and real estate datasets for it, such as property transactions, year of construction, and flat types (number of rooms). Advancing the domain of population estimation, this study reveals the prospects of a small set of detailed and strong predictors that might have the potential of estimating other demographic characteristics such as income.

Towards an Improved Large-Scale Gridded Population Dataset: A Pan-European Study on the Integration of 3D Settlement Data into Population Modelling

Large-scale gridded population datasets available at the global or continental scale have become an important source of information in applications related to sustainable development. In recent years, the emergence of new population models has leveraged the inclusion of more accurate and spatially detailed proxy layers describing the built-up environment (e.g., built-area and building footprint datasets), enhancing the quality, accuracy and spatial resolution of existing products. However, due to the consistent lack of vertical and functional information on the built-up environment, large-scale gridded population datasets that rely on existing built-up land proxies still report large errors of under- and overestimation, especially in areas with predominantly high-rise buildings or industrial/commercial areas, respectively. This research investigates, for the first time, the potential contributions of the new World Settlement Footprint—3D (WSF3D) dataset in the field of large-scale population modelling. First, we combined a Random Forest classifier with spatial metrics derived from the WSF3D to predict the industrial versus non-industrial use of settlement pixels at the Pan-European scale. We then examined the effects of including volume and settlement use information into frameworks of dasymetric population modelling. We found that the proposed classification method can predict industrial and non-industrial areas with overall accuracies and a kappa-coefficient of ~84% and 0.68, respectively. Additionally, we found that both, integrating volume and settlement use information considerably increased the accuracy of population estimates between 10% and 30% over commonly employed models (e.g., based on a binary settlement mask as input), mainly by eliminating systematic large overestimations in industrial/commercial areas. While the proposed method shows strong promise for overcoming some of the main limitations in large-scale population modelling, future research should focus on improving the quality of the WFS3D dataset and the classification method alike, to avoid the false detection of built-up settlements and to reduce misclassification errors of industrial and high-rise buildings.

A data fusion approach to the estimation of temporary populations: An application to Australia

This study establishes a new method for estimating the monthly Average Population Present (APP) in Australian regions. Conventional population statistics, which enumerate people where they usually live, ignore the significant spatial mobility driving short term shifts in population numbers. Estimates of the temporary or ambient population of a region have several important applications including the provision of goods and services, emergency preparedness and serve as more appropriate denominators for a range of social statistics. This paper develops a flexible modelling framework to generate APP estimates from an integrated suite of conventional and novel data sources. The resultant APP estimates reveal the considerable seasonality in small area populations across Australia’s regions alongside the contribution of domestic and international visitors as well as absent residents to the observed monthly variations. The modelling framework developed in the paper is conceived in a manner such that it can be adapted and re-deployed both for use with alternative data sources as well as other situational contexts for the estimation of temporary populations.

Gridded population mapping for Germany based on building density, height and type from Earth Observation data using census disaggregation and bottom-up estimates

Gridded population data is widely used to map fine scale population patterns and dynamics to understand associated human-environmental processes for global change research, disaster risk assessment and other domains. This study mapped gridded population across Germany using weighting layers from building density, building height (both from previous studies) and building type datasets, all created from freely available, temporally and globally consistent Copernicus Sentinel-1 and Sentinel-2 data. We first produced and validated a nation-wide dataset of predominant residential and non-residential building types. We then examined the impact of different weighting layers from density, type and height on top-down dasymetric mapping quality across scales. We finally performed a nation-wide bottom-up population estimate based on the three datasets. We found that integrating building types into dasymetric mapping is helpful at fine scale, as population is not redistributed to non-residential areas. Building density improved the overall quality of population estimates at all scales compared to using a binary building layer. Most importantly, we found that the combined use of density and height, i.e. volume, considerably increased mapping quality in general and with regard to regional discrepancy by largely eliminating systematic underestimation in dense agglomerations and overestimation in rural areas. We also found that building density, type and volume, together with living floor area per capita, are suitable to produce accurate large-area bottom-up population estimates.