Quantitative measurement of acute myocardial infarction cardiac biomarkers by "All-in-One" immune microfluidic chip for early diagnosis of myocardial infarction

Acute myocardial infarction (AMI) is a life-threatening condition with a narrow treatment window, necessitating rapid and accurate diagnostic methods. We present an "all-in-one" convenient and rapid immunoassay system that combines microfluidic technology with a colloidal gold immunoassay. A degassing-driven chip replaces a bulky external pump, resulting in a user-friendly and easy-to-operate immunoassay system. The chip comprises four units: an inlet reservoir, an immunoreaction channel, a waste pool, and an immunocomplex collection chamber, allowing single-channel flow for rapid and accurate AMI biomarker detection. In this study, we focused on cardiac troponin I (cTnI). With a minimal sample of just 4 μL and a total detection time of under 3 min, the chip enabled a quantitative visual analysis of cTnI concentration within a range of 0.5 ∼ 60.0 ng mL-1. This all-in-one integrated microfluidic chip with colloidal gold immunoassay offers a promising solution for rapid AMI diagnosis. The system's portability, small sample requirement, and quantitative visual detection capabilities make it a valuable tool for AMI diagnostics.

A Portable Readout System for Biomarker Detection with Aptamer-Modified CMOS ISFET Array

Biosensors based on ion-sensitive field effect transistors (ISFETs) combined with aptamers offer a promising and convenient solution for point-of-care testing applications due to the ability for fast and label-free detection of a wide range of biomarkers. Mobile and easy-to-use readout devices for the ISFET aptasensors would contribute to further development of the field. In this paper, the development of a portable PC-controlled device for detecting aptamer-target interactions using ISFETs is described. The device assembly allows selective modification of individual ISFETs with different oligonucleotides. Ta2O5-gated ISFET structures were optimized to minimize trapped charge and capacitive attenuation. Integrated CMOS readout circuits with linear transfer function were used to minimize the distortion of the original ISFET signal. An external analog signal digitizer with constant voltage and superimposed high-frequency sine wave reference voltage capabilities was designed to increase sensitivity when reading ISFET signals. The device performance was demonstrated with the aptamer-driven detection of troponin I in both reference voltage setting modes. The sine wave reference voltage measurement method reduced the level of drift over time and enabled a lowering of the minimum detectable analyte concentration. In this mode (constant voltage 2.4 V and 10 kHz 0.1Vp-p), the device allowed the detection of troponin I with a limit of detection of 3.27 ng/mL. Discrimination of acute myocardial infarction was demonstrated with the developed device. The ISFET device provides a platform for the multiplexed detection of different biomarkers in point-of-care testing.

Investigating outlier rates of cardiac troponin I and troponin T assays: A systematic review

Objectives

This review aimed to harmoniously summarize and compare outlier rates for various cardiac troponin (cTn) assays, including high-sensitivity-cTn (hs-cTn) assays and contemporary cTn (generation of assays prior to hs-cTn ones) assays, from the published studies.

Methods

The PRISMA guidelines were utilized to perform this systematic review. Five databases, including PubMed, Scopus, Embase, Cochrane Library, and Web of Science, were searched using specific keywords up to June 30th, 2023. Studies reporting specifically calculated outlier rates for cTn assays when conducting in-vitro diagnosis in human samples were included. Selected studies were then further assessed using the GRADE tool.

Results

Thirteen studies were included. The data from the studies were summarized statistically in this review. The results showed substantial evidence of improved analytical robustness or reduced respective mean rates of outliers, critical outliers, and analytical outliers for hs-cTn assays (0.14 %, 0.18 %, and 0.18 %) compared to contemporary cTn assays (0.63 %, 0.71 %, and 0.50 %).

Conclusion

The findings offer promisingly provide a comprehensive reference for laboratory scientists and clinical staff in choosing the most suitable cTn assay for patient care regrading outlier rates. Besides, this review reveals the advancements of hs-cTn assays with lower outlier rates than contemporary cTn assays. The emerging challenges for continuously improving analytical robustness of cTn assays are also elaborated.

A Novel ELISA for the Quantification of Serum Levels of 2 Glycosylated Variants of Apolipoprotein J: Biomarkers for Myocardial Ischemia

BACKGROUND

Previous studies have pointed out a potential role of ApoJ-Glyc as a biomarker of cardiac ischemia. The aim of this study was to validate the analytical performance of 2 novel ELISAs against 2 different glycosylated ApoJ variants, ApoJ-GlycA2 and ApoJ-GlycA6.

METHODS

The analytical measuring range, limit of blank (LoB), lower limit of quantification (LoQ), precision, accuracy, recovery, cross-reactivity, and stability were evaluated in serum samples.

RESULTS

The analytical measuring range was 500-16 000 ng/mL for ApoJ-GlycA2 and 125-4000 ng/mL for ApoJ-GlycA6, with a LoB of 455 ng/mL and 121 ng/mL for ApoJ-GlycA2 and ApoJ-GlycA6, respectively. The LoQ was 500 ng/mL for ApoJ-GlycA2 and 125 ng/mL for ApoJ-GlycA6. The assay performance fulfills the acceptance criteria established in the European Medicines Agency Guideline on bioanalytical method validation. Specifically, the calibration range variability is <15% for ApoJ-GlycA2 and ApoJ-GlycA6; the accuracy is <15% for ApoJ-GlycA2 and ApoJ-GlycA6; the between- and within-run precision is <15% for ApoJ-GlycA6 and ≤20% for ApoJ-GlycA2; and the total allowable error is <30% for ApoJ-GlycA2 and ApoJ-GlycA6. Cross-reactivity studies revealed the absence of cross-reactivity with endogenous components of the matrix (using ApoJ-depleted serum), with nonglycosylated ApoJ and with transferrin (as a high abundant N-glycosylated serum protein). Both ApoJ-GlycA2 and ApoJ-GlycA6 measurements were stable after storage of serum samples at -80°C for 24 months.

CONCLUSIONS

The newly developed ELISAs to quantify ApoJ-GlycA2 and ApoJ-GlycA6 serum levels showed an acceptable analytical performance according to European Medicines Agency guidelines on bioanalytical method validation in terms of precision, accuracy, recovery, cross-reactivity, and stability.

Analysis of Sensitivity, Specificity, and Predictive Values of High-Sensitivity Troponin T in a Secondary Care Setting: A Retrospective Cohort Study

Background High-sensitivity cardiac troponin (hs-cTn) assays have significantly improved the early detection of myocardial injury and the diagnosis of acute coronary syndrome (ACS). Different diagnostic algorithms exist for the interpretation of hs-cTn in the management of patients with suspected ACS. This study analysed the diagnostic efficacy of hs-cTn using serial and single measurements while also shedding light on the challenges associated with the use of this assay. Methods  We reviewed 189 results belonging to 120 unique patient episodes and records for troponin tests performed in a two-week period obtained from the West Cumberland Hospital, North Cumbria Integrated Care (NCIC), Whitehaven, England. These troponin tests were carried out based on the NCIC trust guidelines for the use of troponin assays in the management of acute coronary syndrome (ACS). A positive troponin test is defined using the NCIC trust guidelines and the National Academy of Clinical Biochemistry (NACB) guidelines. The case notes of the unique patients were reviewed to determine the outcome, which is defined as the clinical diagnosis on discharge of the patient following a cardiologist review. These outcomes were then used to calculate the sensitivity, specificity, and predictive values. We also determined the alternate diagnosis for false-positive tests. Results Using both guidelines to assess the clinical effectiveness of the troponin assay yields slightly varying results, with the single positive test of NACB demonstrating a higher sensitivity of 92.8% (>71.4%) and a slightly better negative predictive value of 97.8% (>96%). However, using the serial troponin measurements as per the NCIC trust guideline demonstrates a better specificity of 95.2% (>42.4%) and a positive predictive value of 66% (>17.5%). False positive results are identified, which are due to alternate diagnoses such as stable angina, myocarditis, heart failure, sepsis, and malignancy. Conclusion  High-sensitivity troponin (hs-cTn) assays play a crucial role in the early detection and management of patients with suspected ACS. This study supports evidence that serial troponin measurements are more diagnostically accurate than single troponin measurements. Although hs-cTn assays offer significant advantages, there remain challenges and limitations that require careful interpretation and clinical correlation.

Development of Liposome-Based Immunoassay for the Detection of Cardiac Troponin I

Cardiovascular diseases (CVDs) are one of the foremost causes of mortality in intensive care units worldwide. The development of a rapid method to quantify cardiac troponin I (cTnI)—the gold-standard biomarker of myocardial infarction (MI) (or “heart attack”)—becomes crucial in the early diagnosis and treatment of myocardial infarction (MI). This study investigates the development of an efficient fluorescent “sandwich” immunoassay using liposome-based fluorescent signal amplification and thereby enables the sensing and quantification of serum-cTnI at a concentration relevant to clinical settings. The calcein-loaded liposomes were utilized as fluorescent nano vehicles, and these have exhibited appropriate stability and efficient fluorescent properties. The standardized assay was sensitive and selective towards cTnI in both physiological buffer solutions and spiked human serum samples. The novel assay presented noble analytical results with sound dynamic linearity over a wide concentration range of 0 to 320 ng/mL and a detection limit of 6.5 ng/mL for cTnI in the spiked human serum.

Biomarkers in the management of acute heart failure: state of the art and role in COVID-19 era

Acute heart failure (AHF) affects millions of people worldwide, and it is a potentially life‐threatening condition for which the cardiologist is more often brought into play. It is crucial to rapidly identify, among patients presenting with dyspnoea, those with AHF and to accurately stratify their risk, in order to define the appropriate setting of care, especially nowadays due to the coronavirus disease 2019 (COVID‐19) outbreak. Furthermore, with physical examination being limited by personal protective equipment, the use of new alternative diagnostic and prognostic tools could be of extreme importance. In this regard, usage of biomarkers, especially when combined (a multimarker approach) is beneficial for establishment of an accurate diagnosis, risk stratification and post‐discharge monitoring. This review highlights the use of both traditional biomarkers such as natriuretic peptides (NP) and troponin, and emerging biomarkers such as soluble suppression of tumourigenicity (sST2) and galectin‐3 (Gal‐3), from patients' emergency admission to discharge and follow‐up, to improve risk stratification and outcomes in terms of mortality and rehospitalization.

Sensitive and quantitative detection of cardiac troponin I with upconverting nanoparticle lateral flow test with minimized interference

Measurement of cardiac troponin I (cTnI) should be feasible for point-of-care testing (POCT) to diagnose acute myocardial infarction (AMI). Lateral flow immunoassays (LFIAs) have been long implemented in POCT and clinical settings. However, sensitivity, matrix effect and quantitation in lateral flow immunoassays (LFIAs) have been major limiting factors. The performance of LFIAs can be improved with upconverting nanoparticle (UCNP) reporters. Here we report a new methodological approach to quantify cTnI using UCNP-LFIA technology with minimized plasma interference. The performance of the developed UCNP-LFIA was evaluated using clinical plasma samples (n = 262). The developed UCNP-LFIA was compared to two reference assays, the Siemens Advia Centaur assay and an in-house well-based cTnI assay. By introducing an anti-IgM scrub line and dried EDTA in the LFIA strip, the detection of cTnI in plasma samples was fully recovered. The UCNP-LFIA was able to quantify cTnI concentrations in patient samples within the range of 30-10,000 ng/L. The LoB and LoD of the UCNP-LFIA were 8.4 ng/L and 30 ng/L. The method comparisons showed good correlation (Spearman's correlation 0.956 and 0.949, p < 0.0001). The developed UCNP-LFIA had LoD suitable for ruling in AMI in patients with elevated cTnI levels and was able to quantify cTnI concentrations in patient samples. The technology has potential to provide simple and rapid assay for POCT in ED setting.

Advances in point-of-care testing for cardiovascular diseases

Point-of-care testing (POCT) is a specific format of diagnostic testing that is conducted without accompanying infrastructure or sophisticated instrumentation. Traditionally, such rapid sample-to-answer assays provide inferior analytical performances to their laboratory counterparts when measuring cardiac biomarkers. Hence, their potentially broad applicability is somewhat bound by their inability to detect clinically relevant concentrations of cardiac troponin (cTn) in the early stages of myocardial injury. However, the continuous refinement of biorecognition elements, the optimization of detection techniques, and the fabrication of tailored fluid handling systems to manage the sensing process has stimulated the production of commercial assays that can support accelerated diagnostic pathways. This review will present the latest commercial POC assays and examine their impact on clinical decision-making. The individual elements that constitute POC assays will be explored, with an emphasis on aspects that contribute to economically feasible and highly sensitive assays. Furthermore, the prospect of POCT imparting a greater influence on early interventions for medium to high-risk individuals and the potential to re-shape the paradigm of cardiovascular risk assessments will be discussed.

Laboratory-related issues in the measurement of cardiac troponins with highly sensitive assays

A number of assay-related issues can affect the performance of cardiac troponin (cTn) measurement in everyday practice. In this respect, it is vital that all information on cTn assays is known and that the performance characteristics of assays are objectively assessed and adequately described. The advent of the latest generation of more sensitive cTn assays has heralded a new wave of information about low concentrations of cTn in blood. These recent generation assays have improved analytical sensitivity and corresponding performance at low cTn concentrations when compared to their predecessors, providing a convincing goal for laboratory medicine in helping clinicians in the diagnosis of acute myocardial infarction. Crucial to the clinical utility of highly sensitive cTn assays is the laboratorians' role in closely scrutinizing proposed assays and defining their value in relation to available evidence. Analytical, as well as pre-analytical and post-analytical, aspects must be documented. In this review, we describe what laboratory professionals should know about their cTn assay performance characteristics and the pre-analytical prerequisites for robustness to ensure optimal post-analytical reporting.

Fluorescent Immunoassays for Detection and Quantification of Cardiac Troponin I: A Short Review

Cardiovascular diseases are considered one of the major causes of human death globally. Myocardial infarction (MI), characterized by a diminished flow of blood to the heart, presents the highest rate of morbidity and mortality among all other cardiovascular diseases. These fatal effects have triggered the need for early diagnosis of appropriate biomarkers so that countermeasures can be taken. Cardiac troponin, the central key element of muscle regulation and contraction, is the most specific biomarker for cardiac injury and is considered the “gold standard”. Due to its high specificity, the measurement of cardiac troponin levels has become the predominant indicator of MI. Various forms of diagnostic methods have been developed so far, including chemiluminescence, fluorescence immunoassay, enzyme-linked immunosorbent assay, surface plasmon resonance, electrical detection, and colorimetric protein assays. However, fluorescence-based immunoassays are considered fast, accurate and most sensitive of all in the determination of cardiac troponins post-MI. This review represents the strategies, methods and levels of detection involved in the reported fluorescence-based immunoassays for the detection of cardiac troponin I.

Performance of ivisen IA-1400, a new point-of-care device with an internal centrifuge system, for the measurement of cardiac troponin I levels

BACKGROUND

We present the analytical performance of the ivisen IA-1400, a new point-of-care device that features a characteristic built-in centrifuge system, to measure blood cardiac troponin I (cTnI) levels.

METHODS

Whole blood and plasma samples obtained from patients who visited Korea University Guro Hospital were used to analyze measurement range, cross-reactivity, interference, and sensitivity and specificity. We performed a correlation analysis of the ivisen IA-1400 versus the Access AccuTnI+3 immunoassay using the UniCel™ DxI 800 platform and the PATHFAST™ hs-cTnI assay.

RESULTS

Within-run precisions were classified as low, 9.8%; middle, 10.2%; and high, 8.5%. The limit of blank was 3.1 ng/L for plasma samples and 4.3 ng/L for whole blood samples. The limit of detection was 8.4 ng/L for plasma samples and 10.0 ng/L for whole blood samples, respectively. The limit of quantitation at a coefficient of variation of 20% and 10% was 19.5 ng/L and 45.5 ng/L for plasma samples, respectively. The comparative evaluation between the two other assays and ivisen IA-1400 showed excellent correlation, with Spearman's correlation coefficients (R) of 0.992 and 0.985. The sensitivity and specificity of ivisen IA-1400 using the optimum cut-off value of 235 ug/L were 94.6% and 98.2%, respectively.

CONCLUSION

The ivisen IA-1400 showed acceptable and promising performance in cTnI measurements using whole blood and plasma samples, with limited information in the clinical performance. The flexibility for sample selection using the internal centrifugation system is the main advantage of this point-of-care device.

Recent advances in cardiac biomarkers detection: From commercial devices to emerging technologies

Although cardiac pathologies are the major cause of death in the world, it remains difficult to provide a reliable diagnosis to prevent heart attacks. Rapid patient care and management in emergencies are critical to prevent dramatic consequences. Thus, relevant biomarkers such as cardiac troponin and natriuretic peptides are currently targeted by commercialized Point-Of-Care immunoassays. Key points still to be addressed concern cost, lack of standardization, and poor specificity, which could limit the reliability of the assays. Consequently, alternatives are emerging to address these issues. New probe molecules such as aptamers or molecularly imprinted polymers should allow a reduction in cost of the assays and an increase in reproducibility. In addition, the assay specificity and reliability could be improved by enabling multiplexing through the detection of several molecular targets in a single device.

How to choose a point-of-care testing for troponin

BACKGROUND

Point-of-care (POC) cTn assays are needed when the central laboratory is unable to provide timely results to the emergency department. Many POC devices are available. The prospect of choosing them is daunting. In order to provide a quick decision-making reference for POC cTn device selection comparing them to the central laboratory, seven POC devices commonly employed by emergency department were evaluated.

METHODS

Firstly, we reviewed all devices package inserts. Secondly, we evaluated several POC cTn assays for imprecision, linearity, and correlation with central laboratory assays according to CLSI EP protocols. The linear regression analyses were performed only for the detectable concentrations. Five cTnI devices (Alere Triage, BioMerieux Vidas, Mitsubishi Pathfast, ReLIA TZ-301, and Radiometer AQT90) were evaluated against a contemporary cTnI assay (Beckman Access II Accu TnI). Two cTnT assays (Radiometer AQT90 and Roche Cobas h232) were compared to a high-sensitivity (hs) cTnT method (Roche Cobas e601).

RESULTS

For cTn levels around the 99th percentile upper reference limits (URLs) of the comparator assays, imprecision could not be assessed for the Alere, BioMerieux, and Cobas h232 as they gave undetectable readings due to a lack of assay sensitivity. Imprecision (CV) was unacceptably high for the ReLIA (33.3%). On account of this precision metric, these four assays were deemed unsuitable. Regression analyses showed acceptable linearity for all the POC devices. The correlation coefficients for ReLIA, BioMerieux, Cobas h232, and Radiometer cTnT were >0.95. Unlike the cTnT devices, the cTnI assays employ different capture and detection antibodies leading to non-commutable results. The POC cTn results were concordant with their comparator-Radiometer cTnT 90%, Pathfast cTnI 85%, and Radiometer cTnI 75%.

CONCLUSION

Our study provides the procedure and essential data to guide selection of a POC cTn device. Of the point-of-care devices, methods evaluated Radiometer AQT90 (cTnI and cTnT) and Pathfast might be considered.

Diagnostic Evaluation of a High-Sensitivity Troponin I Point-of-Care Assay

BACKGROUND

Increasing numbers of patients are presenting worldwide to emergency departments with suspected myocardial infarction. The use of point-of-care troponin assays might enable faster decision-making in this high-risk population and reduce the burden on emergency facilities. Here, we evaluate the diagnostic performance of a point-of-care high-sensitivity troponin I assay.

METHODS

We conducted a prospective cohort study including patients presenting to the emergency department with suspected myocardial infarction from July 2013 to July 2016. A diagnostic algorithm for a high-sensitivity troponin I point-of-care assay was developed in a derivation data set with 669 patients and validated in an additional 610 patients.

RESULTS

The derived 0/1 h algorithm for the point-of-care assay consisted of an admission troponin I &lt;4 ng/L and a δ from 0 h to 1 h &lt;3 ng/L for rule out and an admission troponin I ≥90 ng/L or a δ from 0 h to 1 h ≥20 ng/L for rule in of non-ST-elevation myocardial infarction. Application to the validation cohort showed a negative predictive value of 99.7% (95% CI, 98.1%–100.0%) and 48.0% of patients ruled out, whereas 14.6% were ruled in with a positive predictive value of 86.5% (95% CI, 77.6%–92.8%). The diagnostic performance of the point-of-care high-sensitivity assay was highly comparable to guideline-recommended use of a laboratory-based high-sensitivity troponin assay.

CONCLUSIONS

The clinical application of a 0/1 h diagnostic algorithm based on a high-sensitivity troponin I point-of-care assay is safe, and diagnostic performance is comparable to a laboratory-based high-sensitivity troponin I assay.

Analytical validation of a highly sensitive point-of-care system for cardiac troponin I determination

Background

Highly sensitive cardiac troponin assays (hs-cTn) are not available as point-of-care (POC) measurements. As rapid testing cannot be achieved at the expense of clinical performance, there is an urgent need to develop and rigorously validate POC hs-cTn. Konica Minolta (KM) has recently developed a surface plasmon-field enhanced fluorescence spectroscopy-based POC hs-cTn I system.

Methods

We validated the analytical characteristics of the KM POC system according to the international guidelines.

Results

Limit of blank (LoB) and limit of detection (LoD) were 0.35 and 0.62 ng/L, respectively, hs-cTn I concentrations corresponding to a total CV of 20%, 10% and 5% were 1.5, 3.9 and 11.0 ng/L, respectively. Method comparison studies showed that KM calibration was successfully traced to higher-order references. Limit of quantitation (LoQ), i.e. the hs-cTn I concentration having a total error of measurement of ≤34%, was 10.0 ng/L. The upper reference limit (URL) for 600 healthy blood donors was calculated at 12.2 ng/L (90% confidence interval [CI]: 9.2–39.2), while sex-partitioned URLs were 20.6 (males) and 10.7 ng/L (females), respectively (p < 0.0001). KM assay measured hs-cTn I concentrations >LoD in 65.7% of all reference individuals, in 76.7% of males and in 54.7% of females, respectively.

Conclusions

The KM system joins the characteristics of POC systems to the analytical performance of hs-cTn.

Advances in diagnostic microfluidics

Microfluidics is an emerging field in diagnostics that allows for extremely precise fluid control and manipulation, enabling rapid and high-throughput sample processing in integrated micro-scale medical systems. These platforms are well-suited for both standard clinical settings and point-of-care applications. The unique features of microfluidics-based platforms make them attractive for early disease diagnosis and real-time monitoring of the disease and therapeutic efficacy. In this chapter, we will first provide a background on microfluidic fundamentals, microfluidic fabrication technologies, microfluidic reactors, and microfluidic total-analysis-systems. Next, we will move into a discussion on the clinical applications of existing and emerging microfluidic platforms for blood analysis, and for diagnosis and monitoring of cancer and infectious disease. Together, this chapter should elucidate the potential that microfluidic systems have in the development of effective diagnostic technologies through a review of existing technologies and promising directions.

Evaluation of Molecularly Imprinted Polymers for Point-of-Care Testing for Cardiovascular Disease

Molecular imprinting is a rapidly growing area of interest involving the synthesis of artificial recognition elements that enable the separation of analyte from a sample matrix and its determination. Traditionally, this approach can be successfully applied to small analyte (<1.5 kDa) separation/ extraction, but, more recently it is finding utility in biomimetic sensors. These sensors consist of a recognition element and a transducer similar to their biosensor counterparts, however, the fundamental distinction is that biomimetic sensors employ an artificial recognition element. Molecularly imprinted polymers (MIPs) employed as the recognition elements in biomimetic sensors contain binding sites complementary in shape and functionality to their target analyte. Despite the growing interest in molecularly imprinting techniques, the commercial adoption of this technology is yet to be widely realised for blood sample analysis. This review aims to assess the applicability of this technology for the point-of-care testing (POCT) of cardiovascular disease-related biomarkers. More specifically, molecular imprinting is critically evaluated with respect to the detection of cardiac biomarkers indicative of acute coronary syndrome (ACS), such as the cardiac troponins (cTns). The challenges associated with the synthesis of MIPs for protein detection are outlined, in addition to enhancement techniques that ultimately improve the analytical performance of biomimetic sensors. The mechanism of detection employed to convert the analyte concentration into a measurable signal in biomimetic sensors will be discussed. Furthermore, the analytical performance of these sensors will be compared with biosensors and their potential implementation within clinical settings will be considered. In addition, the most suitable application of these sensors for cardiovascular assessment will be presented.

Performance Evaluation of Cardiac Troponin I Assay: A Comparison Between the Point-of-care Testing Radiometer AQT90 FLEX and the Central Laboratory Siemens Advia Centaur Analyzer

Background

To validate the point of care testing (POCT) Trop-I analyzer and compare it with a central laboratory-based chemiluminescence immunoassay, in order to evaluate its performance for use in critical care areas. Moreover, for clinical decision-making, it is imperative to know the extent to which patient stratification will differ based on the analytic method being used. In particular, the aim of this study was to evaluate the analytical performance of the point-of-care analyzer and demonstrate the agreement with the central laboratory measurements in patients presenting to the emergency department (ED) with chest pain and suspected acute coronary syndrome (ACS).

Methods

This cross-sectional study was performed at the section of chemical pathology, department of pathology and laboratory medicine, the Aga Khan University (AKU), Karachi, from October to November 2017. Samples from patients and the quality control material of Trop-I were analyzed for imprecision, linearity, and method comparison on Advia Centaur (Siemens Diagnostics, CA, USA), and the AQT90 FLEX analyzer (Radiometer Medical ApS, Brønshøj, Denmark) with photometric detection at the section of chemical pathology, AKU. Statistical analysis was done using Microsoft Excel (Microsoft Corporation, Washington, United States) and EP Evaluator version 10.3.0.556 (Data Innovations, LLC, VT, US). Quantitative variables were represented in terms of mean ± SD. For precision, the computed SD was compared with allowable random error. Furthermore, Cohen’s kappa was applied to observe the agreement between the two methods.

Results

The Trop-I Precision study on the POCT analyzer showed a coefficient of variation (CV) of 2.4% using a pooled patient sample with a mean Trop-I of 2.15 ± 0.05 ng/ml. Three standards ranging from 0.034 to 1.316 ng/ml were run in triplicate to verify accuracy and linearity. The allowable systematic error (SEa) was 10.0%. The maximum deviation for a mean recovery from 100% was 4.1%. All three of the mean recoveries were accurate and within the allowable error limits. The results were linear with slope 1.04, intercept 0.0. On a method comparison, Trop-I showed good agreement, yielding a kappa value of 0.95.

Conclusion

This study has validated the performance of a POCT Trop-I assay against a central laboratory immunoassay and found acceptable results. POCT assays for cTnI should be implanted in emergency settings to ensure the fast triage of patients with chest pain, as well as timely diagnosis.

Two desired epitopes of cTnI benefit for preparation of standardized monoclonal antibodies

Acute myocardial infarction (AMI) is one of the most severe cardiovascular diseases in humans, often resulting in unexpected death. Early detection is critical for patient survival. Sandwich ELISA is a common method for the detection of AMI. However, ELISA kits from different manufacturers can give different results, in part because of the lack of standardized epitopes. Therefore, the purpose of this study was to find two standardized epitopes. We predicted two antigen epitopes and respectively immunize mice to manufacture standardized monoclonal antibodies. Eight monoclonal antibodies were prepared. Monoclonal antibodies 7D2 and 2C3 were selected with high affinity, and their characteristics were explored. The results show that monoclonal antibodies 7D2 and 2C3 can both bind to various modified forms and complexes of cardiac troponin I (cTnI), were not cross-reaction with related antigens of normal human serum and can be paired. Therefore, we deem epitopes 30 to 42 and 77 to 89 standardized epitopes.

Clinical use of cardiac troponin for acute cardiac care and emerging opportunities in the outpatient setting

Cardiac troponin (cTn) testing has evolved significantly in recent times. Because of increased sensitivity, its use has shifted from a marker used to help diagnose acute myocardial infarction (MI) to a marker than can be used in the outpatient setting, as well as for both detection of myocardial injury and risk-stratification. Its main role remains in the diagnosis of acute MI and the risk-stratification of patients presenting with suspected acute coronary syndrome. The analytical improvements in assays leading to precise high-sensitivity cTn assays have contributed to the development of numerous strategies to identify patients at both low- and high-risk for acute MI within a few hours. These approaches should reduce overcrowding in the emergency room and expedite triaging. The ability of measuring cTn in most patients using high-sensitivity (hs) assays has allowed for the opportunity to examine its use in the detection of cardiotoxicity in patients undergoing chemotherapy, as well as exploring the application in both primary and secondary prevention of coronary artery disease. This particular field of research has become increasingly complex, partly due to the numerous cTn assays available (I and T; point-of-care, contemporary, hs) and an array of approaches in which one can use the test. The purpose of this document is to summarize the analytical and clinical information relevant to cTn assays, in particular, hs-cTn assays, and describe present and future opportunities for use of cTn in acute cardiac care and in the outpatient setting.

Point-of-Care Compatibility of Ultra-Sensitive Detection Techniques for the Cardiac Biomarker Troponin I-Challenges and Potential Value

Cardiac biomarkers are frequently measured to provide guidance on the well-being of a patient in relation to cardiac health with many assays having been developed and widely utilised in clinical assessment. Effectively treating and managing cardiovascular disease (CVD) relies on swiftly responding to signs of cardiac symptoms, thus providing a basis for enhanced patient management and an overall better health outcome. Ultra-sensitive cardiac biomarker detection techniques play a pivotal role in improving the diagnostic capacity of an assay and thus enabling a better-informed decision. However, currently, the typical approach taken within healthcare depends on centralised laboratories performing analysis of cardiac biomarkers, thus restricting the roll-out of rapid diagnostics. Point-of-care testing (POCT) involves conducting the diagnostic test in the presence of the patient, with a short turnaround time, requiring small sample volumes without compromising the sensitivity of the assay. This technology is ideal for combatting CVD, thus the formulation of ultra-sensitive assays and the design of biosensors will be critically evaluated, focusing on the feasibility of these techniques for point-of-care (POC) integration. Moreover, there are several key factors, which in combination, contribute to the development of ultra-sensitive techniques, namely the incorporation of nanomaterials for sensitivity enhancement and manipulation of labelling methods. This review will explore the latest developments in cardiac biomarker detection, primarily focusing on the detection of cardiac troponin I (cTnI). Highly sensitive detection of cTnI is of paramount importance regarding the rapid rule-in/rule-out of acute myocardial infarction (AMI). Thus the challenges encountered during cTnI measurements are outlined in detail to assist in demonstrating the drawbacks of current commercial assays and the obstructions to standardisation. Furthermore, the added benefits of introducing multi-biomarker panels are reviewed, several key biomarkers are evaluated and the analytical benefits provided by multimarkers-based methods are highlighted.

Rapid and Sensitive Detection of Cardiac Troponin I for Point-of-Care Tests Based on Red Fluorescent Microspheres

A reliable lateral flow immunoassay (LFIA) based on a facile one-step synthesis of single microspheres in combining with immunochromatography technique was developed to establish a new point-of-care test (POCT) for the rapid and early detection of cardiac troponin I (cTnI), a kind of cardiac specific biomarker for acute myocardial infarction (AMI). The double layered microspheres with clear core-shell structures were produced using soap-free emulsion polymerization method with inexpensive compounds (styrene and acrylic acid). The synthetic process was simple, rapid and easy to control due to one-step synthesis without any complicated procedures. The microspheres are nanostructure with high surface area, which have numerous carboxyl groups on the out layer, resulting in high-efficiency coupling between the carrier and antibody via amide bond. Meanwhile, the red fluorescent dye, Nile-red (NR), was wrapped inside the microspheres to improve its stability, as well to reduce the background noise, because of its higher emission wavelength than interference from real plasma samples. The core-shell structures provided different functional areas to separate antibody and dyes, so the immunoassay has highly sensitive, wide working curves in the range of 0–40 ng/mL, low limits of detection (LOD) at 0.016 ng/mL, and limits of quantification (LOQ) at 0.087 ng/mL with coefficient of variations (CV) of 10%. This strategy suggested an outstanding platform for LFIA, with good reproducibility and stability to straightforwardly analyze the plasma samples without washing steps, thereby reducing the operating procedures for non-professionals and promoting detection efficiency. The whole detection process can be completed in less than 15 min. This novel immunoassay offers a reliable and favorable analytical result by detecting the real samples, indicating that it holds great potential as a new alternative for biomolecule detection in complex samples, for the early detection of cardiac specific biomarkers.

Microparticle-based platform for point-of-care immunoassays

There is a need for quantitative and sensitive, yet simple point-of-care immunoassays. We have developed a point-of-care microparticle-based immunoassay platform which combines the performance of a microtiter well-based assay with the usability of a rapid assay. The platform contained a separate reaction and detection chambers and microparticles for the solid-phase. Photoluminescent up-converting nanoparticles (UCNPs) were used as labels. The platform was tested with a cardiac troponin I assay, and a limit of detection of 19.7 ng/L was obtained. This study demonstrates the feasibility of developing point-of-care assays on the new platform for various analytes of interests.

Lab-on-a-Chip Platforms for Detection of Cardiovascular Disease and Cancer Biomarkers

Cardiovascular disease (CVD) and cancer are two leading causes of death worldwide. CVD and cancer share risk factors such as obesity and diabetes mellitus and have common diagnostic biomarkers such as interleukin-6 and C-reactive protein. Thus, timely and accurate diagnosis of these two correlated diseases is of high interest to both the research and healthcare communities. Most conventional methods for CVD and cancer biomarker detection such as microwell plate-based immunoassay and polymerase chain reaction often suffer from high costs, low test speeds, and complicated procedures. Recently, lab-on-a-chip (LoC)-based platforms have been increasingly developed for CVD and cancer biomarker sensing and analysis using various molecular and cell-based diagnostic biomarkers. These new platforms not only enable better sample preparation, chemical manipulation and reaction, high-throughput and portability, but also provide attractive features such as label-free detection and improved sensitivity due to the integration of various novel detection techniques. These features effectively improve the diagnostic test speed and simplify the detection procedure. In addition, microfluidic cell assays and organ-on-chip models offer new potential approaches for CVD and cancer diagnosis. Here we provide a mini-review focusing on recent development of LoC-based methods for CVD and cancer diagnostic biomarker measurements, and our perspectives of the challenges, opportunities and future directions.

Cardiac troponins: from myocardial infarction to chronic disease

Elucidation of the physiologically distinct subunits of troponin in 1973 greatly facilitated our understanding of cardiac contraction. Although troponins are expressed in both skeletal and cardiac muscle, there are isoforms of troponin I/T expressed selectively in the heart. By exploiting cardiac-restricted epitopes within these proteins, one of the most successful diagnostic tests to date has been developed: cardiac troponin (cTn) assays. For the past decade, cTn has been regarded as the gold-standard marker for acute myocardial necrosis: the pathological hallmark of acute myocardial infarction (AMI). Whilst cTn is the cornerstone for ruling-out AMI in patients presenting with a suspected acute coronary syndrome (ACS), elevated cTn is frequently observed in those without clinical signs indicative of AMI, often reflecting myocardial injury of 'unknown origin'. cTn is commonly elevated in acute non-ACS conditions, as well as in chronic diseases. It is unclear why these elevations occur; yet they cannot be ignored as cTn levels in chronically unwell patients are directly correlated to prognosis. Paradoxically, improvements in assay sensitivity have meant more differential diagnoses have to be considered due to decreased specificity, since cTn is now more easily detected in these non-ACS conditions. It is important to be aware cTn is highly specific for myocardial injury, which could be attributable to a myriad of underlying causes, emphasizing the notion that cTn is an organ-specific, not disease-specific biomarker. Furthermore, the ability to detect increased cTn using high-sensitivity assays following extreme exercise is disconcerting. It has been suggested troponin release can occur without cardiomyocyte necrosis, contradicting conventional dogma, emphasizing a need to understand the mechanisms of such release. This review discusses basic troponin biology, the physiology behind its detection in serum, its use in the diagnosis of AMI, and some key concepts and experimental evidence as to why cTn can be elevated in chronic diseases.

Point-of-care testing (POCT) and evidence-based laboratory medicine (EBLM) - does it leverage any advantage in clinical decision making?

Point-of-care testing (POCT) is the analysis of patient specimens outside the clinical laboratory, near or at the site of patient care, usually performed by clinical staff without laboratory training, although it also encompasses patient self-monitoring. It is able to provide a rapid result near the patient and which can be acted upon immediately. The key driver is the concept that clinical decision making may be delayed when samples are sent to the clinical laboratory. Balanced against this are considerations of increased costs for purchase and maintenance of equipment, staff training, connectivity to the laboratory information system (LIS), quality control (QC) and external quality assurance (EQA) procedures, all required for accreditation under ISO 22870. The justification for POCT depends upon being able to demonstrate that a more timely result (shorter turnaround times (TATs)) is able to leverage a clinically important advantage in decision making compared with the central laboratory (CL). In the four decades since POCT was adapted for the self-monitoring of blood glucose levels by subjects with diabetes, numerous new POCT methodologies have become available, enabling the clinician to receive results and initiate treatment more rapidly. However, these instruments are often operated by staff not trained in laboratory medicine and hence are prone to errors in the analytical phase (as opposed to laboratory testing where the analytical phase has the least errors). In some environments, particularly remote rural settings, the CL may be at a considerable distance and timely availability of cardiac troponins and other analytes can triage referrals to the main centers, thus avoiding expensive unnecessary patient transportation costs. However, in the Emergency Department, availability of more rapid results with POCT does not always translate into shorter stays due to other barriers to implementation of care. In this review, we apply the principles of evidence-based laboratory medicine (EBLM) looking for high quality systematic reviews and meta-analyses, ideally underpinned by randomized controlled trials (RCTs), looking for evidence of whether POCT confers any advantage in clinical decision making in different scenarios.

Novel Risk Stratification Assays for Acute Coronary Syndrome

PURPOSE OF REVIEW

Since identification of aspartate aminotransferase as the first cardiac biomarker in the 1950s, there have been a number of new markers used for myocardial damage detection over the decades. There have also been several generations of troponin assays, each with progressively increasing sensitivity for troponin detection. Accordingly, the "standard of care" for myocardial damage detection continues to change. The purpose of this paper is to review the clinical utility, biological mechanisms, and predictive value of these various biomarkers in contemporary clinical studies.

RECENT FINDINGS

As of this writing, a fifth "next" generation troponin assay has now been cleared by the US Food and Drug Administration for clinical use in the USA for subjects presenting with suspected acute coronary syndromes. Use of these high-sensitivity assays has allowed for earlier detection of myocardial damage as well as greater negative predictive value for infarction after only one or two serial measurements. Recent algorithms utilizing these assays have allowed for more rapid rule-out of myocardial infarction in emergency department settings. In this review, we discuss novel assays available for the risk assessment of subjects presenting with chest pain, including both the "next generation" cardiac troponin assays as well as other novel biomarkers. We review the biological mechanisms for these markers, and explore the positive and negative predictive value of the assays in clinical studies, where reported. We also discuss the potential use of these new markers within the context of future clinical care in the modern era of higher sensitivity troponin testing. Finally, we discuss advances in new platforms (e.g., mass spectrometry) that historically have not been considered for rapid in vitro diagnostic capabilities, but that are taking a larger role in clinical diagnostics, and whose prognostic value and power promise to usher in new markers with potential for future clinical utility in acute coronary syndrome.

Asia-Pacific consensus statement on the optimal use of high-sensitivity troponin assays in acute coronary syndromes diagnosis: focus on hs-TnI

OBJECTIVE

High-sensitivity troponin (hs-Tn) assays need to be applied appropriately to improve diagnosis and patient outcomes in acute coronary syndromes (ACS).

METHODS

Experts from Asia Pacific convened in 2015 to provide data-driven consensus-based, region-specific recommendations and develop an algorithm for the appropriate incorporation of this assay into the ACS assessment and treatment pathway.

RESULTS

Nine recommendations were developed by the expert panel: (1) troponin is the preferred cardiac biomarker for diagnostic assessment of ACS and is indicated for patients with symptoms of possible ACS; (2) hs-Tn assays are recommended; (3) serial testing is required for all patients; (4) testing should be performed at presentation and 3 hours later; (5) gender-specific cut-off values should be used for hs-Tn I assays; (6) hs-Tn I level >10 times the upper limit of normal should be considered to 'rule in' a diagnosis of ACS; (7) dynamic change >50% in hs-Tn I level from presentation to 3-hour retest identifies patients at high risk for ACS; (8) where only point-of-care testing is available, patients with elevated readings should be considered at high risk, while patients with low/undetectable readings should be retested after 6 hours or sent for laboratory testing and (9) regular education on the appropriate use of troponin tests is essential.

CONCLUSIONS

We propose an algorithm that will potentially reduce delays in discharge by the accurate 'rule out' of non-ACS patients within 3 hours. Appropriate research should be undertaken to ensure the efficacy and safety of the algorithm in clinical practice, with the long-term goal of improvement of care of patients with ACS in Asia Pacific.

Clinical performance of cardiac Troponin I: A comparison between the POCT AQT90 FLEX and the Dimension Vista analyzer in an emergency setting

BACKGROUND

Cardiac troponin [cTn (I or T)] is the preferred biomarker for the diagnosis of myocardial infarction (MI).

AIM

We studied the analytical performance of the POCT AQT90 FLEX cTnI assay and its diagnostic accuracy, in comparison to the Dimension Vista cTnI method, in patients presenting to the Emergency Department (ED) with suspect of acute coronary syndrome (ACS).

METHODS

786 consecutive patients were enrolled. cTnI was measured at admission to the ED and about 3 and 6 hours later. The imprecision study was carried out using different lots of quality controls (QCs). ROC curve analysis was conducted using discharge diagnoses in order to verify the global diagnostic accuracy.

RESULTS

The concentrations measured in the QCs ranging from 0.033 to 1.26μg/L show CVs% ranging from 2.81 to 7.56%, comparable to those declared by the manufacturer. Passing-Bablok and linear regression analysis show a high significant correlation (R²=0.90, p<0.0001); Bland-Altman test describes a statistically significant negative bias (Bias=-0.2336; 95%CI=-0.4217/-0.0456, p=0.0150). ROC curves obtained using Dimension Vista and AQT90 FLEX cTnI assays displayed similar clinical performance being not statistically significant the difference of the corresponding AUC. Comparing sensitivity and specificity of cTnI concentrations obtained from the ROC curve analysis using AQT90 FLEX, we found a "best cut-off" (0.014μg/L) lower than that declared from the manufacturer (0.023μg/L).

CONCLUSIONS

The comparison of two different assays of cTnI against a diagnosis of acute MI (AMI) shows that both assays behave equally well with a high degree of sensitivity and specificity. The resulting "best cut-off" suggests that this AQT90 FLEX cTnI concentration could be evaluated as the potentially new "clinically usable" cut-off for AMI/myocardial necrosis diagnoses.

Equal clinical performance of a novel point-of-care cardiac troponin I (cTnI) assay with a commonly used high-sensitivity cTnI assay

BACKGROUND

Efficient rule-out of acute myocardial infarction (MI) facilitates early disposition of chest pain patients in emergency departments (ED). Point-of-care (POC) cardiac troponin (cTn) may improve patient throughput. We compared the diagnostic accuracy of a novel cTnI test (Minicare cTnI, Philips), with current POC cTnI (I-Stat, Abbott) and high-sensitivity central laboratory cTnI (hs-cTnI; Architect, Abbott) assays.

METHODS

The clinical performance of the assays were compared in samples from 450 patients from a previous clinical evaluation of Minicare cTnI.

RESULTS

Minicare cTnI correlated with Architect hs-cTnI (r²=0.85, p<0.0001) and I-Stat cTnI (r²=0.93, p<0.0001). Areas under the receiver operating characteristics curves were 0.87-0.91 at admission (p=ns) and 0.96-0.97 3h after admission (p=ns). The negative predictive values (NPV) at admission were 95% ((92-97%, 95% CI) for Minicare cTnI and increased to 99% (97-100%) at 2-4h, and similar to Architect hs-cTnI (98%, 96-100%), but higher than I-Stat cTnI (95%, 92-97%; p<0.01). Negative likelihood ratios (LR-) after 2-4h were 0.06 (0.02-0.17, 95% CI) for Minicare cTnI, 0.11 (0.05-0.24) for Architect hs-cTnI (p=0.02) and 0.28 (0.18-0.43) for I-Stat cTnI (p<0.0001). The clinical concordances between Minicare cTnI and Architect hs-cTnI were 92% (admission) and 95% (2-4h), with lower concordances between Minicare cTnI and I-Stat cTnI (83% and 78%, respectively; p=0.007).

CONCLUSIONS

The Minicare cTnI POC assay may become useful for prompt and safe ruling-out of AMI in ED patients with suspected AMI using a guideline supported 0/3h sampling protocol.

Advances in Cardiac Biomarkers of Acute Coronary Syndrome

Acute coronary syndrome (ACS) encompasses a pathophysiological spectrum of cardiovascular diseases, all of which have significant morbidity and mortality. ACS was once considered an acute condition; however, new treatment strategies and improvements in biomarker assays have led to ACS being an acute and chronic disease. Cardiac troponin is the preferred biomarker for the diagnosis of myocardial infarction, and there is considerable interest and efforts toward development and implementation of high-sensitivity cardiac troponin (hs-cTn) assays worldwide. Analytical and clinical performance characteristics of hs-cTn assays as well as testing limitations are important for laboratorians and clinicians to understand in order to utilize testing appropriately. Furthermore, expanding the clinical utility of hs-cTn into other cohorts such as asymptomatic community dwelling populations, heart failure, and chronic kidney disease populations supports novel opportunities for improved short- and long-term prognosis.

Cardiac Troponin Assays: Guide to Understanding Analytical Characteristics and Their Impact on Clinical Care

BACKGROUND

Cardiac troponin I (cTnI) and cardiac troponin T (cTnT) determinations are fixtures in clinical practice and research. Cardiac troponin testing has been the standard of practice for the diagnosis of acute myocardial infarction (AMI), early rule-out, risk stratification, and outcomes assessment in patients presenting with acute coronary syndrome (ACS) and non-ACS myocardial injury. We recognize from reading the literature over the past several years how poorly understood the analytical characteristics are for cTnI and cTnT assays by laboratorians, clinicians, and scientists who use these assays.

CONTENT

The purposes of this mini-review are (a) to define limit of blank, limit of detection, limit of quantification, and imprecision, (b) overview the analytical characteristics of the existing cardiac troponin assays, (c) recommend approaches to define a healthy (normal) reference population for determining the 99th percentile and the appropriate statistic to use for this calculation, (d) clarify how an assay becomes designated as “high sensitivity,” and (e) provide guidance on determining delta (Δ) change values.

SUMMARY

This review raises important educational information regarding cTnI and cTnT assays, their 99th percentile upper reference limits (URL) differentiated by sex, and specifically addresses high-sensitivity (hs)-assays used to measure low concentrations. Recommendations are made to help clarify the nomenclature and analytical and clinical characteristics to define hs-assays. The review also identifies challenges for the evolving implementation of hs-assays into clinical practice. It is hoped that with the introduction of these concepts, laboratorians, clinicians and researchers can develop a more unified view of how these assays should be used worldwide.

Analytical evaluation of a new point of care system for measuring cardiac Troponin I

OBJECTIVES

Point-of-care cardiac troponin testing with adequate analytical performances has the potential to improve chest pain patients flow in the emergency department. We present the analytical evaluation of the newly developed Philips Minicare cTnI point-of-care immunoassay.

DESIGN & METHODS

Li-heparin whole blood and plasma were used to perform analytical studies. The sample type comparison study was performed at 4 different hospitals. The 99th percentile upper reference limit (URL) study was performed using Li-heparin plasma, Li-heparin whole blood and capillary blood samples from 750 healthy adults, aging from 18 to 86years.

RESULTS

Limit of the blank, limit of detection and limit of quantitation at 20% coefficient of variation (CV) were determined to be 8.5ng/L, 18ng/L and 38ng/L respectively without significant differences between whole blood and plasma for LoQ. Cross-reactivity and interferences were minimal and no high-dose hook was observed. Total CV was found to be from 7.3% to 12% for cTnI concentrations between 109.6 and 6135.4ng/L. CV at the 99th percentile URL was 18.6%. The sample type comparison study between capillary blood, Li-heparin whole blood and Li-heparin plasma samples demonstrated correlation coefficients between 0.99 and 1.00 with slopes between 1.03 and 1.08. The method comparison between Minicare cTnI and Beckman Coulter Access, AccuTnI+3 demonstrated a correlation coefficient of 0.973 with a slope of 1.09. The 99th percentile URL of a healthy population was calculated to be 43ng/L with no significant difference between genders or sample types.

CONCLUSIONS

The Minicare cTnI assay is a sensitive and precise, clinical usable test for determination of cTnI concentration that can be used in a near-patient setting as an aid in the diagnosis of acute myocardial infarction.

Development of a fluorescent cardiomyocyte specific binding probe

Cardiomyocytes are the major component of the heart. Their dysfunction or damage could lead to serious cardiovascular diseases, which have claimed numerous lives around the world. A molecule able to recognize cardiomyocytes would have significant value in diagnosis and treatment. Recently a novel peptide termed myocyte targeting peptide (MTP), with three residues of a non-natural amino acid biphenylalanine (Bip), showed good affinity to cardiomyocytes. Its selectivity towards cardiac tissues was concluded to be due to the ability of Bip to bind cardiac troponin I. With the aim of optimizing the affinity and the specificity towards cardiac myocytes and to better understand structure-activity relationship, a library of MTP derivatives was designed. Exploiting a fluorescent tag, the selectivity of the MTP analogs to myocardium over skeletal and stomach muscle tissues was assayed by fluorescence imaging. Among the tested sequences, the peptide probe Bip2, H-Lys(FITC)-Arg-Arg-Arg-Arg-Arg-Arg-Arg-Gly-Ser-Gly-Ser-Bip-Bip-NH2, displayed the best selectivity for cardiomyocytes.

Point-of-Care Technologies for Precision Cardiovascular Care and Clinical Research: National Heart, Lung, and Blood Institute Working Group

Point-of-care technologies (POC or POCT) are enabling innovative cardiovascular diagnostics that promise to improve patient care across diverse clinical settings. The National Heart, Lung, and Blood Institute convened a working group to discuss POCT in cardiovascular medicine. The multidisciplinary working group, which included clinicians, scientists, engineers, device manufacturers, regulatory officials, and program staff, reviewed the state of the POCT field; discussed opportunities for POCT to improve cardiovascular care, realize the promise of precision medicine, and advance the clinical research enterprise; and identified barriers facing translation and integration of POCT with existing clinical systems. A POCT development roadmap emerged to guide multidisciplinary teams of biomarker scientists, technologists, health care providers, and clinical trialists as they: 1) formulate needs assessments; 2) define device design specifications; 3) develop component technologies and integrated systems; 4) perform iterative pilot testing; and 5) conduct rigorous prospective clinical testing to ensure that POCT solutions have substantial effects on cardiovascular care.