Biodegradable thermosensitive copolymer hydrogels for drug delivery

Optimization of thermoresponsive chitosan/β-glycerophosphate hydrogels for injectable neural tissue engineering application

Regeneration of neural tissue and recovery of lost functions following an accident or disease to the central nervous system remains a major challenge worldwide, with limited treatment options available. The main reason for the failure of conventional therapeutic techniques to regenerate neural tissue is the presence of blood-brain barrier separating nervous system from systemic circulation and the limited capacity of self-regeneration of the nervous system. Injectable hydrogels have shown great promise for neural tissue engineering given their suitability for minimally invasive in situ delivery and tunable mechanical and biological properties. Chitosan (CS)/β-glycerophosphate (β-GP) hydrogels have been extensively investigated and shown regenerative potential in a wide variety of tissues such as bone and cartilage tissue engineering. However, the potential of CS/β-GP hydrogels has never been tested for injectable neural tissue engineering applications. In the present study, CS/β-GP hydrogels, consisting of 0.5-2% CS and 2-3% β-GP, were prepared and characterized to investigate their suitability for injectable neural tissue engineering applications. The resulting CS/β-GP-hydrogels showed a varying range of properties depending on the CS/β-GP blend ratio. In particular, the 0.5%:3% and 0.75%:3% CS/β-GP hydrogels underwent rapid gelation (3 min and 5 min, respectively) at physiological temperature (37 °C) and pH (7.4). They also had suitable porosity, osmolality, swelling behavior and biodegradation for tissue engineering. The biocompatibility of hydrogels was determined in vitro using PC12 cells, an immortalized cell line with neuronal cell-like properties, revealing that these hydrogels supported cell growth and proliferation. In conclusion, the thermoresponsive 0.5%:3% and 0.75%:3% CS/β-GP hydrogels had the greatest potential for neural tissue engineering.

Advances in Stimuli-responsive Hydrogels for Tissue Engineering and Regenerative Medicine Applications: A Review Towards Improving Structural Design for 3D Printing

The physicochemical properties of polymeric hydrogels render them attractive for the development of 3D printed prototypes for tissue engineering in regenerative medicine. Significant effort has been made to design hydrogels with desirable attributes that facilitate 3D printability. In addition, there is significant interest in exploring stimuli-responsive hydrogels to support automated 3D printing into more structurally organised prototypes such as customizable bio-scaffolds for regenerative medicine applications. Synthesizing stimuli-responsive hydrogels is dependent on the type of design and modulation of various polymeric materials to open novel opportunities for applications in biomedicine and bio-engineering. In this review, the salient advances made in the design of stimuli-responsive polymeric hydrogels for 3D printing in tissue engineering are discussed with a specific focus on the different methods of manipulation to develop 3D printed stimuli-responsive polymeric hydrogels. Polymeric functionalisation, nano-enabling and crosslinking are amongst the most common manipulative attributes that affect the assembly and structure of 3D printed bio-scaffolds and their stimuli- responsiveness. The review also provides a concise incursion into the various applications of stimuli to enhance the automated production of structurally organized 3D printed medical prototypes.

Study on the Application of a Novel Nano-Curcumin Drug for Alzheimer’s Disease

Alzheimer’s disease (AD) is a neurodegenerative disease hallmarked by impaired cognitive function and memory decline; it is accompanied by a variety of mental symptoms and behavioral disorders. This disease has a serious impact on society, families, and the afflicted patients. Curcumin (Cur) nanoparticles were preparation by modifying curcumin with polyethylene glycol-polylactic acid (PEG-PLA) amphiphilic block copolymer. The resulting nanodrug can successfully penetrate the blood brain barrier (BBB) and concentrate in the main pathological areas of AD. As measured with a Zeta particle size analyzer, the particle size of PEG-PLA/Cur was 100 ± 0.53 nm, and it was electrically neutral. In vitro experiments revealed that PEG-PLA/Cur successfully penetrated the membrane of PC12 cells and inhibited proliferation. PEG-PLA/Cur also exhibited an inhibitory effect on the production of amyloid β protein (Aβ fiber) and depolymerization activity on Aβ fiber aggregates. PEG-PLA/Cur represents a novel nanodrug with the potential to treat AD.

Overview of in situ gelling injectable hydrogels for diabetic wounds

Diabetes mellitus (DM) is an endocrine disorder that causes increased blood glucose than usual due to insulin impairment. In DM, several complications arise in which diabetic wound (DW) is the most devastating complication. About 25% of patients with DM expected to develop DWs in their lifetime and undergo limb amputations. Even though several treatments such as surgery, debridement, wound dressings, advanced therapies were available, the overall conclusion has been that with very few exceptions, patients still suffer from limitations like pain, frequent dress changing, high rates of failure, and cost involvement. Further, the treatments involving the delivery of therapeutic agents in treating DWs have limited success due to abnormal levels of proteases in the DW environment. In this backdrop, in situ gelling injectable hydrogels have gained special attention due to their easy encapsulation of therapeutic medications and prolonged release, filling the wound defect areas, ease of handling, and minimally invasive surgical procedures. Though the in situ gelling injectable hydrogels are developed a couple of decades ago, their use for treating DW has not yet been explored thoroughly. Thus, in this review, we have covered the sequential events of DW healing, pathophysiology, current treatments, and its limitations, along with a particular emphasis on the mechanism of action of these in situ gelling injectable hydrogels treating DWs.

Advances in biodegradable and injectable hydrogels for biomedical applications

In situ-forming injectable hydrogels are smart biomaterials that can be implanted into living bodies with minimal invasion. Due to pioneer work of Prof. Sung Wan Kim in this field, injectable hydrogels have shown great potentials in many different biomedical applications. Biodegradable and injectable hydrogels can be administered at room temperature as viscous polymer sols. They will degrade after accomplishing their tasks. Before injecting into living bodies, active substances can be loaded into viscous polymer sols with a high loading efficiency by simple mixing. After injecting into living bodies, active substances-loaded hydrogels can be formed and active substances can be released in a controlled manner upon diffusion or polymer degradation. Due to their outstanding properties and unique features, injectable hydrogels are very promising in many biomedical applications including drug/protein/gene delivery, tissue engineering, and regenerative medicine. In this review, we briefly introduce recent development of several important types of in situ-forming injectable hydrogels reported by our group during the last three years. Important properties and potential applications (such as cancer therapy, insulin release and wound healing) of these injectable hydrogels are reviewed. Challenges and perspectives in this research field are also discussed.

Folate-conjugated, mesoporous silica functionalized boron nitride nanospheres for targeted delivery of doxorubicin

Biomedical application of boron nitride (BN) nanomaterials has recently attracted considerable attentions. BN nanospheres (BNNS) could safely deliver anti-cancer drug into tumor cells, which makes them potential nanocarrier for cancer therapy. However, the poor dispersity in physiological environments and low drug loading capacity severely limit their further applications. Herein, we developed a novel drug delivery system based on folate-conjugated mesoporous silica (MS)-functionalized BNNS (BNMS-FA). Dispersity and drug loading capacity of BNNS were highly improved by MS modification. BNMS-FA complexes were nontoxic up to a concentration of 100 μg/mL, and could be specifically internalized by HeLa and MCF-7 cells via folate receptor-mediated endocytosis. Doxorubicin (DOX) could be loaded onto BNMS-FA complexes with high efficiency via π-π stacking and hydrogen bonding, and showed a sustained release pattern under different pH conditions. BNMS-FA/DOX complexes exhibited superior drug internalization and antitumor efficacy over free DOX, BNNS/DOX and BNMS/DOX complexes, which were considered promising for targeted cancer therapy.

Polypeptide Thermogels as Three-Dimensional Scaffolds for Cells

BACKGROUND

Thermogel is an aqueous solution that exhibits a sol-to-gel transition as the temperature increases. Stem cells, growth factors, and differentiating factors can be incorporated in situ in the matrix during the sol-to-gel transition, leading to the formation of a three-dimensional (3D) cell-culture scaffold.

METHODS

The uses of thermogelling polypeptides, such as collagen, Matrigel™, elastin-like polypeptides, and synthetic polypeptides, as 3D scaffolds of cells, are summarized in this paper.

RESULTS

The timely supply of growth factors to the cells, cell survival, and metabolite removal is to be insured in the cell culture matrix. Various growth factors were incorporated in the matrix during the sol-to-gel transition of the thermogelling polypeptide aqueous solutions, and preferential differentiation of the incorporated stem cells into specific target cells were investigated. In addition, modulus of the matrix was controlled by post-crosslinking reactions of thermogels or employing composite systems. Chemical functional groups as well as biological factors were selected appropriately for targeted differentiation of the incorporated stem cells.

CONCLUSION

In addition to all the advantages of thermogels including mild conditions for cell-incorporation and controlled supplies of the growth factors, polypeptide thermogels provide neutral pH environments to the cells during the degradation of the gel. Polypeptide thermogels as an injectable scaffold can be a promising system for their eventual in vivo applications in stem cell therapy.

Preparation of pH/redox dual responsive polymeric micelles with enhanced stability and drug controlled release

Stimuli-responsive polymeric micelles were prepared through self-assembly of amphiphilic copolymers poly(ethylene glycol)-poly(γ-benzyl l-glutamate), followed by a core-crosslinking reaction using cystamine as the crosslinking agent. The crosslinked micelles with spherical morphologies in nanometer size showed enhanced stability against dilution and concentrated salt solutions compared to the micelles before crosslinking. Doxorubicin (DOX) as a model drug was encapsulated into the core of micelles through electrostatic interactions between carboxylic acid and DOX. In vitro drug release under pH and redox conditions was investigated. Furthermore, the cytotoxicity of micelles was evaluated before and after drug loading. The endocytosis of DOX-loaded micelles and the intracellular drug release were studied. DOX-loaded micelles exhibited accelerated drug release behaviors in an acidic and reductive environment, and showed an inhibited premature release behavior as compared to the noncrosslinked micelles. Considering their enhanced stability, pH and redox dual triggered responsive characteristics, the polymeric micelles can serve as potential systems for controlled drug delivery.

Thermogelling 3D Systems towards Stem Cell-Based Tissue Regeneration Therapies

Stem cell culturing and differentiation is a very important research direction for tissue engineering. Thermogels are well suited for encapsulating cells because of their non-biotoxic nature and mild sol-gel transition as temperature increases. In particular, thermogels provide a 3D growth environment for stem cell growth, which is more similar to the extracellular matrix than flat substrates, so thermogels as a medium can overcome many of the cell abnormalities caused by 2D cell growth. In this review, we summarize the applications of thermogels in cell and stem cell culture in recent years. We also elaborate on the methods to induce stem cell differentiation by using thermogel-based 3D scaffolds. In particular, thermogels, encapsulating specific differentiation-inducing factor and having specific structures and moduli, can induce the differentiation into the desired tissue cells. Three dimensional thermogel scaffolds that control the growth and differentiation of cells will undoubtedly have a bright future in regenerative medicine.

Advances in thermosensitive polymer-grafted platforms for biomedical applications

Studies on "smart" polymeric material performing environmental stimuli such as temperature, pH, magnetic field, enzyme and photo-sensation have recently paid much attention to practical applications. Among of them, thermo-responsive grafted copolymers, amphiphilic steroids as well as polyester molecules have been utilized in the fabrication of several multifunctional platforms. Indeed, they performed a strikingly functional improvement comparing to some original materials and exhibited a holistic approach for biomedical applications. In case of drug delivery systems (DDS), there has been some successful proof of thermal-responsive grafted platforms on clinical trials such as ThermoDox®, BIND-014, Cynviloq IG-001, Genexol-PM, etc. This review would detail the recent progress and highlights of some temperature-responsive polymer-grafted nanomaterials or hydrogels in the 'smart' DDS that covered from synthetic polymers to nature-driven biomaterials and novel generations of some amphiphilic functional platforms. These approaches could produce several types of smart biomaterials for human health care in future.

Hydrogels for Hydrophobic Drug Delivery. Classification, Synthesis and Applications

Hydrogels have been shown to be very useful in the field of drug delivery due to their high biocompatibility and ability to sustain delivery. Therefore, the tuning of their properties should be the focus of study to optimise their potential. Hydrogels have been generally limited to the delivery of hydrophilic drugs. However, as many of the new drugs coming to market are hydrophobic in nature, new approaches for integrating hydrophobic drugs into hydrogels should be developed. This article discusses the possible new ways to incorporate hydrophobic drugs within hydrogel structures that have been developed through research. This review describes hydrogel-based systems for hydrophobic compound delivery included in the literature. The section covers all the main types of hydrogels, including physical hydrogels and chemical hydrogels. Additionally, reported applications of these hydrogels are described in the subsequent sections.

An overview of polymeric dosage forms in buccal drug delivery: State of art, design of formulations and their in vivo performance evaluation

Owing to the ease of the administration, the oral cavity is an attractive site for the delivery of drugs. The main difficulty for administration via the buccal route is an effective physiological removal mechanism of the oral cavity that takes way the formulation from the buccal site and decreases the bioavailability of drugs. The use of mucoadhesive polymers in buccal drug delivery shows assessing buccal drug permeation and absorption, however some studies bring an in vivo performance. This review points to the use of polymers in the manufacture of drug delivery systems (hydrogels, films and tablets) and shows the results of their in vivo performance tests.

Intratumoral Delivery of Doxorubicin on Folate-Conjugated Graphene Oxide by In-Situ Forming Thermo-Sensitive Hydrogel for Breast Cancer Therapy

By taking advantage of the pH-sensitive drug release property of graphene oxide (GO) after intracellular uptake, we prepared folic acid (FA)-conjugated GO (GOFA) for targeted delivery of the chemotherapeutic drug doxorubicin (DOX). GOFA-DOX was further encapsulated in an injectable in-situ forming thermo-sensitive hyaluronic acid-chitosan-g-poly(N-isopropylacrylamide) (HACPN) hydrogel for intratumoral delivery of DOX. As the degradation time of HACPN could be extended up to 3 weeks, intratumoral delivery of GOFA-DOX/HACPN could provide controlled and targeted delivery of DOX through slow degradation HACPN and subsequent cellular uptake of released GOFA-DOX by tumor cells through interactions of GOFA with folate receptors on the tumor cell's surface. GOFA nano-carrier and HACPN hydrogel were first characterized for the physico-chemical properties. The drug loading experiments indicated the best preparation condition of GOFA-DOX was by reacting 0.1 mg GOFA with 2 mg DOX. GOFA-DOX showed pH-responsive drug release with ~5 times more DOX released at pH 5.5 than at pH 7.4 while only limited DOX was released from GOFA-DOX/HACPN at pH 7.4. Intracellular uptake of GOFA by endocytosis and release of DOX from GOFA-DOX in vitro could be confirmed from transmission electron microscopic and confocal laser scanning microscopic analysis with MCF-7 breast cancer cells. The targeting effect of FA was revealed when intracellular uptake of GOFA was blocked by excess FA. This resulted in enhanced in vitro cytotoxicity as revealed from the lower half maximal inhibitory concentration (IC50) value of GOFA-DOX (7.3 μg/mL) compared with that of DOX (32.5 μg/mL) and GO-DOX (10 μg/mL). The flow cytometry analysis indicated higher apoptosis rates for cells treated with GOFA-DOX (30%) compared with DOX (8%) and GO-DOX (11%). Animal studies were carried out with subcutaneously implanted MCF-7 cells in BALB/c nude mice and subject to intratumoral administration of drugs. The relative tumor volumes of control (saline) and GOFA-DOX/HACPN groups at day 21 were 2.17 and 1.79 times that at day 0 with no significant difference. In comparison, the relative tumor volumes of treatment groups at the same time were significantly different at 1.02, 0.67 and 0.48 times for DOX, GOFA-DOX and GOFA-DOX/HACPN groups, respectively. The anti-tumor efficacy was also supported by images from an in vivo imaging system (IVIS) using MCF-7 cells transfected with luciferase (MCF-7/Luc). Furthermore, tissue biopsy examination and blood analysis indicated that intratumoral delivery of DOX using GOFA-DOX/HACPN did not elicit acute toxicity. Taken together, GOFA-DOX/HACPN could be deemed as a safe and efficient intratumoral drug delivery system for breast cancer therapy.

Influence of alginate backbone on efficacy of thermo-responsive alginate-g-P(NIPAAm) hydrogel as a vehicle for sustained and controlled gene delivery

Alginate grafted poly(N-isopropylacrylamide) hydrogels (Alg-g-P(NIPAAm)) form three-dimensional networks in mild conditions, making them suitable for incorporation of labile macromolecules, such as DNA. The impact of P(NIPAAm) on copolymer characteristics has been well studied, however the impact of alginate backbone characteristics on copolymer properties has to-date not been investigated. Six different Alg-g-P(NIPAAm) hydrogels were synthesised with 10% alginate, which varied in terms of molecular weight (MW) and mannuronate/guluronate (M/G) monomer ratio, and with 90% NIPAAm in order to develop an injectable and thermo-responsive hydrogel formulation for localised gene delivery. Hydrogel stiffness was directly proportional to MW and the M/G ratio of the alginate backbone. Hydrogels with a high MW or low M/G ratio alginate backbone demonstrated a greater stiffness than those hydrogels comprising low MW alginates and high M/G ratio. Hydrogels with a high M/G ratio also produced a complexed and meshed hydrogel network while hydrogels with a low M/G ratio produced a simplified structure with the superposition of Alg-g-P(NIPAAm) sheets. This study was designed to produce the optimal Alg-g-P(NIPAAm) hydrogel with respect to localised delivery of DNA nanoparticles as a potential medical device for those with castrate resistant prostate cancer (CRPC). Given that CRPC typically disseminates to bone causing pain, morbidity and a plethora of skeletal related events, a copolymer based hydrogel was designed to for long term release of therapeutic DNA nanoparticles. The nanoparticles were comprised of plasmid DNA (pDNA), complexed with an amphipathic cell penetrating peptide termed RALA that is designed to enter cells with high efficiency. Alginate MW and M/G ratio affected stiffness, structure, injectability and degradation of the Alg-g-P(NIPAAm) hydrogel. Algogel 3001, had the optimal characteristics for long-term application and was loaded with RALA/pDNA NPs. From the release profiles, it was evident that RALA protected the pDNA from degradation over a 30-day period and conferred a sustained and controlled release profile from the hydrogels compared to pDNA only. Taken together, we have designed a slowly degrading hydrogel suitable for sustained delivery of nucleic acids when incorporated with the RALA delivery peptide. This now opens up several opportunities for the delivery of therapeutic pDNA from this thermo-responsive hydrogel with numerous medical applications.

Photo-cross-linked biodegradable hydrogels based on n-arm-poly(ethylene glycol), poly(ε-caprolactone) and/or methacrylic acid for controlled drug release

In this paper, a novel kind of photo-cross-linked biodegradable hydrogels based on n-arm-poly(ethylene glycol) ( n = 2, 3, and 4) and poly(ɛ-caprolactone) was prepared by ultraviolet-initiated free radical polymerization. The resulting n-arm-poly(ethylene glycol)-poly(ɛ-caprolactone) and n-arm-poly(ethylene glycol)-poly(ɛ-caprolactone) acrylate (n-arm-PEG-PCL-AC, macromer) were characterized by proton nuclear magnetic resonance and fourier transform infrared spectra. The influences of arm numbers and concentration of macromer on the properties of hydrogel were researched systematically, and the results showed that the gelation time, equilibrium swelling ratio, in vitro degradation, and drug release rate decreased with the increase of arm numbers and concentration of macromer. The degradation and drug release rate could be controlled by varying the cross-linking density of hydrogel, indicating a potential application as controlled drug delivery system. Cytotoxicity test of hydrogel extracts was conducted using L929 mouse fibroblasts, and the relative growth rate exceeded 75% (cytotoxicity type: class 1) after incubation for 24 h, showing excellent cytocompatibility. In addition, the paper presented a pH-sensitive hydrogel (G4_pH) based on 4-arm-PEG-PCL-AC and acrylic acid, and the influences of pH value on swelling behaviors and in vitro drug release of the pH-sensitive hydrogel were examined. The hydrogels shrank under acidic condition and would swell in neutral or basic medium. The pH-dependent drug release behaviors indicated a promising application of the materials as oral drug delivery vehicles.

A novel local drug delivery system: Superhydrophobic titanium oxide nanotube arrays serve as the drug reservoir and ultrasonication functions as the drug release trigger

A local drug delivery system consisting of superhydrophobic titanium oxide nanotube (S-TNTs) arrays and ultrasonic-controlled release trigger was developed in this work. Hydrophilic TNTs arrays are converted into superhydrophobic after being treated by 1H,1H,2H,2H- perfluorooctyl-triethoxysilane (POTS). S-TNTs arrays serving as a drug-carrying vehicle require no extra sealing treatment due to the excellent isolation effect from the trapped air layer on the surface. Different amounts of drugs could be loaded into S-TNTs arrays by control of the structure of arrays (including length and diameter of tubes) and the original amount of drug in the drug-loading solution. The relation between surface morphology of TNTs arrays and superhydrophobicity (isolation effect) was thoroughly investigated. To achieve a stimulus-responsive drug delivery system, ultrasonication was employed as an efficient drug release trigger. Trapped air layer could be selectively removed by ultrasonication, and therefore the loaded drug could be released in a multiple and controlled manner. Any drugs that can dissolve in nonpolar solutions are expected to be suitable for this local drug delivery system.

Emerging bone tissue engineering via Polyhydroxyalkanoate (PHA)-based scaffolds

Polyhydroxyalkanoates (PHAs) are a class of biodegradable polymers derived from microorganisms. On top of their biodegradability and biocompatibility, different PHA types can contribute to varying mechanical and chemical properties. This has led to increasing attention to the use of PHAs in numerous biomedical applications over the past few decades. Bone tissue engineering refers to the regeneration of new bone through providing mechanical support while inducing cell growth on the PHA scaffolds having a porous structure for tissue regeneration. This review first introduces the various properties PHA scaffold that make them suitable for bone tissue engineering such as biocompatibility, biodegradability, mechanical properties as well as vascularization. The typical fabrication techniques of PHA scaffolds including electrospinning, salt-leaching and solution casting are further discussed, followed by the relatively new technology of using 3D printing in PHA scaffold fabrication. Finally, the recent progress of using different types of PHAs scaffold in bone tissue engineering applications are summarized in intrinsic PHA/blends forms or as composites with other polymeric or inorganic hybrid materials.

Influence of residual composition on the structure and properties of extracellular matrix derived hydrogels

In this work, hydrolysates of extracellular matrix (hECM) were obtained from rat tail tendon (TR), bovine Achilles tendon (TAB), porcine small intestinal submucosa (SIS) and bovine pericardium (PB), and they were polymerized to generate ECM hydrogels. The composition of hECM was evaluated by quantifying the content of sulphated glycosaminoglycans (sGAG), fibronectin and laminin. The polymerization process, structure, physicochemical properties, in vitro degradation and biocompatibility were studied and related to their composition. The results indicated that the hECM derived from SIS and PB were significantly richer in sGAG, fibronectin and laminin, than those derived from TAB and TR. These differences in hECM composition influenced the polymerization and the structural characteristics of the fibrillar gel network. Consequently, the swelling, mechanics and degradation of the hydrogels showed a direct relationship with the remaining composition. Moreover, the cytocompatibility and the secretion of transforming growth factor beta-1 (TGF-β1) by macrophages were enhanced in hydrogels with the highest residual content of ECM biomolecules. The results of this work evidenced the role of the ECM molecules remaining after both decellularization and hydrolysis steps to produce tissue derived hydrogels with structure and properties tailored to enhance their performance in tissue engineering and regenerative medicine applications.

Injectable Polypeptide Thermogel as a Tissue Engineering System for Hepatogenic Differentiation of Tonsil-Derived Mesenchymal Stem Cells

A poly(ethylene glycol)-b-poly(l-alanine) (PEG-l-PA) hydrogel incorporating tonsil-derived mesenchymal stem cells (TMSCs), tauroursodeoxycholic acid (TUDCA), hepatocyte growth factor (HGF), and fibroblast growth factor 4 (FGF4) was prepared through thermal gelation of an aqueous polymer solution for an injectable tissue engineering application. The thermal gelation accompanied conformational changes of both PA and PEG blocks. The gel modulus at 37 °C was controlled to be 1000 Pa by using a 14.0 wt % aqueous polymer solution. The gel preserved its physical integrity during the 3D culture of the cells. TUDCA, HGF, and FGF4 were released from the PEG-l-PA hydrogel over 21 days of the 3D cell culture period. TMSCs initially exhibited a spherical shape, whereas some fibers protruded from the cells on days 14-21 of 3D culture. The injectable system exhibited pronounced expressions of the hepatic biomarkers at both mRNA and protein levels, which are significantly better than the commercially available hyaluronic acid gel. In particular, the hepatogenically differentiated cells from the TMSCs in the injectable system demonstrated hepatic biofunctions comparable to HepG2 cells for the uptakes of low density lipoproteins (52%) and indocyanine green (76%), and the production of albumin (40%) and urea (52%), which are also significantly better than the 3D-cultured cells in the commercially available hyaluronic acid gel. Our studies suggest that the PEG-l-PA thermogel incorporating TMSCs, TUDCA, and growth factors is highly promising as an in situ forming tissue engineering system.

PCL-based thermo-gelling polymers for in vivo delivery of chemotherapeutics to tumors

The synthesis of a multiblock poly(ether ester urethane)s comprising poly(ε-caprolactone), poly(ethylene glycol), and poly(propylene glycol) segments is described. We found that this polymer possessed a critical thermo-gelation concentration of 4wt%. Molecular characterization of the polymer was performed in terms of molecular weight determination, chemical composition elucidation and functional group determination using GPC, NMR, and FTIR. We carried out in vitro paclitaxel and doxorubicin release studies and demonstrated that sustained therapeutic release of about 2weeks can be obtained with this system. A nude mice model of tumor was developed and intratumoral injection of therapeutic-loaded thermo-gel demonstrated that PTX-loaded thermo-gel effectively inhibited the growth of tumors.

Thermoresponsive hydrogels based on a phosphorylated star-shaped copolymer: mimicking the extracellular matrix for in situ bone repair

A bioinspired hydrogel prepared using a star-polymer exhibits sol to gel transition to induce in situ biomineralization and facilitate cell proliferation.

Recent Advances of Using Hybrid Nanocarriers in Remotely Controlled Therapeutic Delivery

The development of hybrid biomaterials has been attracting great attention in the design of materials for biomedicine. The nanosized level of inorganic and organic or even bioactive components can be combined into a single material by this approach, which has created entirely new advanced compositions with truly unique properties for drug delivery. The recent advances in using hybrid nanovehicles as remotely controlled therapeutic delivery carriers are summarized with respect to different nanostructures, including hybrid host-guest nanoconjugates, micelles, nanogels, core-shell nanoparticles, liposomes, mesoporous silica, and hollow nanoconstructions. In addition, the controlled release of guest molecules from these hybrid nanovehicles in response to various remote stimuli such as alternating magnetic field, near infrared, or ultrasound triggers is further summarized to introduce the different mechanisms of remotely triggered release behavior. Through proper chemical functionalization, the hybrid nanovehicle system can be further endowed with many new properties toward specific biomedical applications.

New Linear and Star-Shaped Thermogelling Poly([R]-3-hydroxybutyrate) Copolymers

The synthesis of multi-arm poly([R]-3-hydroxybutyrate) (PHB)-based triblock copolymers (poly([R]-3-hydroxybutyrate)-b-poly(N-isopropylacrylamide)-b-[[poly(methyl ether methacrylate)-g-poly(ethylene glycol)]-co-[poly(methacrylate)-g-poly(propylene glycol)]], PHB-b-PNIPAAM-b-(PPEGMEMA-co-PPPGMA), and their subsequent self-assembly into thermo-responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi-arm PHB macroinitiators. The composition of the resulting copolymers was investigated by (1) H and (13) C J-MOD NMR spectroscopy as well as size-exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self-assemble into thermo-responsive gels in aqueous solution. Rheological studies indicated that the linear one-arm PHB-based copolymer tend to form a micellar solution, whereas the two- and four-arm PHB-based copolymers afforded gels with enhanced mechanical properties and solid-like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB-based copolymer. All copolymers revealed a double thermo-responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self-assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non-significant toxic response of the gels, as assessed by the cell viability of the CCD-112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL(-1) , suggest that these PHB-based thermo-responsive gels are promising candidate biomaterials for drug-delivery applications.

Hydrogel-Based Drug Delivery Systems for Poorly Water-Soluble Drugs

Hydrogels are three-dimensional materials that can withstand a great amount of water incorporation while maintaining integrity. This allows hydrogels to be very unique biomedical materials, especially for drug delivery. Much effort has been made to incorporate hydrophilic molecules in hydrogels in the field of drug delivery, while loading of hydrophobic drugs has not been vastly studied. However, in recent years, research has also been conducted on incorporating hydrophobic molecules within hydrogel matrices for achieving a steady release of drugs to treat various ailments. Here, we summarize the types of hydrogels used as drug delivery vehicles, various methods to incorporate hydrophobic molecules in hydrogel matrices, and the potential therapeutic applications of hydrogels in cancer.

Recent Progress in Using Biomaterials as Vitreous Substitutes

Vitreous substitutes are crucial adjuncts during vitreo-retinal surgery for retinal diseases such as complicated retinal detachment, macular holes, complications of diabetic retinopathy, and ocular trauma involving posterior segment. In retinal detachment surgery, an internal tamponade agent is required to provide internal pressure for reattachment of the detached neurosensory retina. Current available options serve only as a temporary surgical adduct or short-term solution and are associated with inherent problems. Despite many years of intensive research, an ideal vitreous substitute remains elusive. Indeed, the development of an ideal vitreous substitute requires the concerted efforts of synthetic chemists and biomaterial engineers, as well as ophthalmic surgeons. In this review, we propose that polymeric hydrogels present the future of artificial vitreous substitutes due to its high water composition, optical transparency, and rheological properties that closely mimic the natural vitreous. In particular, thermosensitive smart hydrogels, with reversible sol to gel change, have emerged as the material class with the most potential to succeed as ideal vitreous substitutes, facilitating easy implementation during surgery. Importantly, these smart hydrogels also display potential as efficacious drug delivery systems.