Self-emulsifying drug delivery systems in oral (poly)peptide drug delivery

Loading bioactive peptides within different nanocarriers to enhance their functionality and bioavailability; in vitro and in vivo studies

A hydrolyzed protein is a blend of peptides and amino acids which is the result of hydrolysis by enzymes, acids or alkalis. The Bioactive Peptides (BPs) show important biological roles including antioxidant, antimicrobial, anti-diabetic, anti-cancer, and anti-hypertensive effects, as well as positive effects on the immune, nervous, and digestive systems. Despite the benefits of BPs, challenges such as undesired organoleptic properties, solubility profile, chemical instability, and low bioavailability limit their use in functional food formulations and dietary supplements. Nanocarriers have emerged as a promising solution for overcoming these challenges by improving the stability, solubility, resistance to gastric digestion, and bioavailability, allowing for the targeted and controlled delivery, and reduction or masking of the undesirable flavor of BPs. This study reviews the recent scientific accomplishments concerning the loading of BPs into various nanocarriers including lipid, carbohydrate and protein based-nanocarriers. A special emphasis is given to their application in food formulations in accordance to the challenges associated with their use.

Recent Advancements in the Development of Nanocarriers for Mucosal Drug Delivery Systems to Control Oral Absorption

Oral administration of active pharmaceutical ingredients is desirable because it is easy, safe, painless, and can be performed by patients, resulting in good medication adherence. The mucus layer in the gastrointestinal (GI) tract generally acts as a barrier to protect the epithelial membrane from foreign substances; however, in the absorption process after oral administration, it can also disturb effective drug absorption by trapping it in the biological sieve structured by mucin, a major component of mucus, and eliminating it by mucus turnover. Recently, functional nanocarriers (NCs) have attracted much attention due to their immense potential and effectiveness in the field of oral drug delivery. Among them, NCs with mucopenetrating and mucoadhesive properties are promising dosage options for controlling drug absorption from the GI tracts. Mucopenetrating and mucoadhesive NCs can rapidly deliver encapsulated drugs to the absorption site and/or prolong the residence time of NCs close to the absorption membrane, providing better medications than conventional approaches. The surface characteristics of NCs are important factors that determine their functionality, owing to the formation of various kinds of interactions between the particle surface and mucosal components. Thus, a deeper understanding of surface modifications on the biopharmaceutical characteristics of NCs is necessary to develop the appropriate mucosal drug delivery systems (mDDS) for the treatment of target diseases. This review summarizes the basic information and functions of the mucosal layer, highlights the recent progress in designing functional NCs for mDDS, and discusses their performance in the GI tract.

Double layer spherical nanoparticles with hyaluronic acid coating to enhance oral delivery of exenatide in T2DM rats

Soybean phospholipid was used as an amphiphilic material to form reverse micelles (RMs) in medium glycerol monolinoleate (Maisine) with Exenatide (EXT.) encapsulated in the polar core formed by the hydrophilic part of phospholipid. Cremopher RH40 and caprylocaproyl macrogol-8 glycerides EP/caprylocaproyl polyoxyl-8 glycerides NF (Labrasol) were added as surfactants to prepare reverse micelles-self emulsifying drug delivery system (RMs-SEDDS). On this basis, oil in water (O/W) emulsion was further prepared. By adding DOTAP, the surface of the emulsion was positively charged. Finally, hyaluronic acid wrapping in the outermost layer by electrostatic adsorption and reverse micelles-O/W-sodium hyaluronate (RMs-O/W-HA) nanoparticles containing Exenatide were prepared. RMs-SEDDS was spherical with an average particle size of 213.6 nm and RMs-O/W-HA was double-layered spherical nanoparticle with an average particle size of 309.2 nm. HA coating enhanced the adhesion of nanoparticles (NPs), and RMs-O/W-HA increased cellular uptake through CD44-mediated endocytosis. Pharmacodynamics results showed that RMs-SEDDS and RMs-O/W-HA could reduce blood glucose in type 2 diabetic rats, protect pancreatic β cells to a certain extent, and relieve insulin resistance and hyperlipemia complications with good safety.

Design and Evaluation of Hydrophobic Ion Paired Insulin Loaded Self Micro-Emulsifying Drug Delivery System for Oral Delivery

Despite several novel and innovative approaches, clinical translation of oral insulin delivery into commercially viable treatment is still challenging due to its poor absorption and rapid degradation in GIT. Thus, an insulin-SDS hydrophobic ion pair loaded self-microemulsifying drug delivery system (SMEDDS) was formulated to exploit the hypoglycemic effects of orally delivered insulin. Insulin was initially hydrophobically ion paired with sodium dodecyl sulphate (SDS) to enhance its lipophilicity. The successful complexation of Insulin-SDS was confirmed by FTIR and surface morphology was evaluated using SEM. Stability of insulin after its release from HIP complex was evaluated using SDS PAGE. Subsequently, Ins-SDS loaded SMEDDS was optimized using two factorial designs. In vitro stability of insulin entrapped in optimized SMEDDS against proteolytic degradation was also assessed. Further, antidiabetic activity of optimized Ins-SDS loaded SMEDDS was evaluated in diabetic rats. Insulin complexed with SDS at 6:1 (SDS/insulin) molar ratio with almost five-fold increased lipophilicity. The SMEDDS was optimized at 10% Labraphil M2125 CS, 70% Cremophore EL, and 20% Transcutol HP with better proteolytic stability and oral antidiabetic activity. An Ins-SDS loaded SMEDDS was successfully optimized. Compared with insulin and Ins-SDS complex, the optimized SMEDDS displayed considerable resistance to GI enzymes. Thus, the SMEDDS showed potential for effective delivery of macromolecular drugs with improved oral bioavailability.

Challenges and opportunities in delivering oral peptides and proteins

INTRODUCTION

Rapid advances in bioengineering enable the use of complex proteins as therapeutic agents to treat diseases. Compared with conventional small molecule drugs, proteins have multiple advantages, including high bioactivity and specificity with low toxicity. Developing oral dosage forms with active proteins is a route to improve patient compliance and significantly reduce production costs. However, the gastrointestinal environment remains a challenge to this delivery path due to enzymatic degradation, low permeability, and weak absorption, leading to reduced delivery efficiency and poor clinical outcomes.

AREAS COVERED

This review describes the barriers to oral delivery of peptides and complex proteins, current oral delivery strategies utilized and the opportunities and challenges ahead to try and circumvent these barriers. Oral protein drugs on the market and clinical trials provide insights and approaches for advancing delivery strategies.

EXPERT OPINION

Although most current studies on oral protein delivery rely on in vitro and in vivo animal data, the safety and limitations of the approach in humans remain uncertain. The shortage of clinical data limits the development of new or alternative strategies. Therefore, designing appropriate oral delivery strategies remains a significant challenge and requires new ideas, innovative design strategies and novel model systems.

Formulation and processing of solid self-emulsifying drug delivery systems (HME S-SEDDS): A single-step manufacturing process via hot-melt extrusion technology through response surface methodology

The objective of the current study is the formulation development and manufacturing of solid self-emulsifying drug delivery systems (HME S-SEDDS) via a single-step continuous hot-melt extrusion (HME) process. For this study, poorly soluble fenofibrate was selected as a model drug. From the results of pre-formulation studies, Compritol® HD5 ATO, Gelucire® 48/16, and Capmul® GMO-50 were selected as oil, surfactant and co-surfactant respectively for manufacturing of HME S-SEDDS. Neusilin® US2 was selected as a solid carrier. The design of experiments (response surface methodology) was employed to prepare formulations via a continuous HME process. The formulations were evaluated for emulsifying properties, crystallinity, stability, flow properties and drug release characteristics. The prepared HME S-SEDDS showed excellent flow properties, and the resultant emulsions were stable. The globule size of the optimized formulation was 269.6 nm. The DSC and XRD studies revealed the amorphous nature of the formulation and FTIR studies showed no significant interaction between fenofibrate and excipients. The drug release studies showed significant (p < 0.05) improvement in solubility compared to the pure drug (DE15 = 45.04 for the optimized formulation), as >90% of drug release was observed within 15 min. The stability studies for the optimized formulation were conducted for 3 months at 40 °C/75% RH.

Quality by Design-Based Development of Solid Self-Emulsifying Drug Delivery System (SEDDS) as a Potential Carrier for Oral Delivery of Lysozyme

For many years, researchers have been making efforts to find a manufacturing technique, as well as a drug delivery system, that will allow for oral delivery of biopharmaceuticals to their target site of action without impairing their biological activity. Due to the positive in vivo outcomes of this formulation strategy, self-emulsifying drug delivery systems (SEDDSs) have been intensively studied in the last few years as a way of overcoming the different challenges associated with the oral delivery of macromolecules. The purpose of the present study was to examine the possibility of developing solid SEDDSs as potential carriers for the oral delivery of lysozyme (LYS) using the Quality by Design (QbD) concept. LYS was successfully ion paired with anionic surfactant, sodium dodecyl sulphate (SDS), and this complex was incorporated into a previously developed and optimized liquid SEDDS formulation comprising medium-chain triglycerides, polysorbate 80, and PEG 400. The final formulation of a liquid SEDDS carrying the LYS:SDS complex showed satisfactory in vitro characteristics as well as self-emulsifying properties (droplet size: 13.02 nm, PDI: 0.245, and zeta potential: -4.85 mV). The obtained nanoemulsions were robust to dilution in the different media and highly stable after 7 days, with a minor increase in droplet size (13.84 nm) and constant negative zeta potential (-0.49 mV). An optimized liquid SEDDS loaded with the LYS:SDS complex was further solidified into powders by adsorption onto a chosen solid carrier, followed by direct compression into self-emulsifying tablets. Solid SEDDS formulations also exhibited acceptable in vitro characteristics, while LYS preserved its therapeutic activity in all phases of the development process. On the basis of the results gathered, loading the hydrophobic ion pairs of therapeutic proteins and peptides to solid SEDDS may serve as a potential method for delivering biopharmaceuticals orally.

Assessment of hydrophobic-ion paired insulin incorporated SMEDDS for the treatment of diabetes mellitus

To overcome the low oral bioavailability of insulin, we hypothesized that the insulin-hydrophobic ion pairing (HIP) complex incorporated self-microemulsifying drug delivery system (SMEDDS) would be beneficial. In the present study, an oral insulin delivery system was developed and estimated using the HIP technique and SMEDDS. Further insulin-HIP complexes were characterized using various spectroscopical techniques. Additionally, insulin-HIP complexes were subjected to analysis of complexes' conformational stability in the real physiological solution using computational approaches. On the other hand, in vitro, and in vivo studies were carried out to investigate the permeability and hypoglycemic effect. Subsequently, in an in vitro non-everted gut sac study, the apparent permeability coefficient (P_app) was approximately 8-fold higher in the colon than in the jejunum, and the HIP-incorporated SMEDDS showed an approximately 3-fold higher P_app value than the insulin solution. The hypoglycemic effect after in situ colon instillation, the HIP complex between insulin and sodium docusate-incorporated SMEDDS showed a pharmacological availability of 2.52 ± 0.33 % compared to the subcutaneously administered insulin solution. Thus, based on these outcomes, it can be concluded that the selection of appropriate counterions is important in developing HIP-incorporated SMEDDS, wherein this system shows promise as a tool for oral peptide delivery systems.

Hydrophobic ion pairing-based self-emulsifying drug delivery systems: a new strategy for improving the therapeutic efficacy of water-soluble drugs

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are formulations consisting of oil phase, emulsifiers, and co-emulsifiers, which can be spontaneously emulsified in the body to form O/W microemulsion. Traditionally, SEDDS are used commercially for the improvement of oral absorption and in vivo performances for poorly water-soluble drugs. However, SEDDS formulations were rarely reported for the delivery of water-soluble drugs. Recent studies have found that SEDDS have the potential for water-soluble macromolecular drugs by the application of the hydrophobic ion pairing (HIP) technology.

AREAS COVERED

This review summarized the characteristics of HIP complexes in SEDDS and introduced their advantages and discussed the future prospects of HIP-based SEDDS in drug delivery.

EXPERT OPINION

Hydrophobic ion pairing (HIP) is a technology that combines lipophilic structures on polar counterions to increase the lipophilicity through electrostatic interaction. Recent studies showed that HIP-based SEDDS offer an effective way to increase the mucosal permeability and improve the chemical stability for antibiotics, proteases, DNA-based drugs, and other water-soluble macromolecular drugs. It is believed that HIP-based SEDDS offer a potential and attractive method capable of delivering hydrophilic macromolecules with ionizable groups for oral administration.

Gastrointestinal Permeation Enhancers for the Development of Oral Peptide Pharmaceuticals

Recently, two oral-administered peptide pharmaceuticals, semaglutide and octreotide, have been developed and are considered as a breakthrough in peptide and protein drug delivery system development. In 2019, the Food and Drug Administration (FDA) approved an oral dosage form of semaglutide developed by Novo Nordisk (Rybelsus^®) for the treatment of type 2 diabetes. Subsequently, the octreotide capsule (Mycapssa^®), developed through Chiasma's Transient Permeation Enhancer (TPE) technology, also received FDA approval in 2020 for the treatment of acromegaly. These two oral peptide products have been a significant success; however, a major obstacle to their oral delivery remains the poor permeability of peptides through the intestinal epithelium. Therefore, gastrointestinal permeation enhancers are of great relevance for the development of subsequent oral peptide products. Sodium salcaprozate (SNAC) and sodium caprylate (C8) have been used as gastrointestinal permeation enhancers for semaglutide and octreotide, respectively. Herein, we briefly review two approved products, Rybelsus^® and Mycapssa^®, and discuss the permeation properties of SNAC and medium chain fatty acids, sodium caprate (C10) and C8, focusing on Eligen technology using SNAC, TPE technology using C8, and gastrointestinal permeation enhancement technology (GIPET) using C10.

Self-emulsifying drug delivery systems: a novel approach to deliver drugs

Self-emulsifying drug delivery systems (SEDDS) are a proven method for poorly soluble substances works by increasing the solubility and bioavailability. SEDDS and isotropic mixtures, are composed of oils, surfactants, and occasionally cosolvents. The ability of these formulations and methods to produce microemulsions or fine oil-in-water (o/w) emulsions after moderate stirring and dilution by water phase along the GI tract might be a promising technique for lipophilic agents with dissolution rate-limited absorption. This review provides an outline of SEDDS's numerous advances and biopharmaceutical elements, types, manufacturing, characterization, limitations, and future prospects. The evaluation of SEDDS and its applications are also discussed, focusing on the advances of SEDDS's solid self-emulsifying delivery mechanism and dosage form. By integrating suitable polymer into the formulation, SEDDS may be studied for the creation of a formulation with sustained drug release. This technology's improvement might lead to a new application in the field of medicine delivery. SEDDS has been demonstrated to be quite efficient in increasing oral bioavailability of lipophilic products. SEDDS is one of the promising methods for controlling the characteristics of medications that are not great choices for oral delivery. It is also worth mentioning that SEDDS may be made in variety of solid dosage forms that are acceptable for both oral and parenteral administration.

Multi-strategic approaches for enhancing active transportation using self-emulsifying drug delivery system

Oral delivery is the most desired route of drug administration and it can be more beneficial for patients suffering from chronic diseases wherein frequent parenteral administration of proteins such as insulin and calcitonin is required. The BCS class II drugs show low aqueous solubility and high permeability whereas BCS class IV drugs suffer from low aqueous solubility and low permeability. Additionally, biologic drugs are highly sensitive to presence of bioenzymes and bile salts when administered orally. Self-emulsifying drug delivery system (SEDDS) is a thermodynamically stable lipid formulation that enhances oral absorption of active ingredients via the opening of tight junctions, increasing the membrane fluidity, and thus overcomes the physiological barriers like viscous mucus layer, strong acid conditions and enzymatic degradation. An understanding of different theories that govern SEDDS formation and drug release can help in formulating a highly stable and effective drug delivery system. Poorly permeable drugs such as chlorpromazine require modification using methods like hydrophobic ion pairing, complexation with phospholipids, etc. to enable high entrapment efficiency which is discussed in the article. Additionally, the article gives an overview of the influence of polymers, length of fatty acids chain and zeta potential in enhancing permeation across the intestinal membrane.

Progress and limitations of oral peptide delivery as a potentially transformative therapy

INTRODUCTION

The oral delivery of peptides offers advantages over the injectable route of administration due to patient convenience. However, oral delivery remains challenging due to physiological barriers. Numerous formulation technologies have been developed to overcome these challenges, and understanding the advantages and limitations of each technology is important for the development of new delivery systems to enable oral delivery of peptides designed for parenteral administration.

AREAS COVERED

This review summarizes key learnings from the use of permeation enhancers (PEs) for oral peptide delivery associated with solid dosage form optimization to maximize the PE effect. Furthermore, we will highlight the most recent emerging delivery strategies to improve oral peptide bioavailability such as nanoparticles, self-emulsifying drug delivery systems, gut shuttles, and ingestible devices. In addition, advantages and limitations of these technologies will be compared with the permeation enhancer technology.

EXPERT OPINION

Despite the success of permeation enhancer technology in the FDA approved oral peptide products for gastric and intestinal delivery, oral peptide delivery is still facing the immense challenge of low-to-single digit oral bioavailability and the impact of food and water intake on oral absorption. Optimization of drug product attributes such as dissolution kinetics is critical to overcome spreading and dilution effects in vivo to improve permeation enhancer efficacy. The next frontiers to substantially increase oral bioavailability and transform injectable peptides to oral deliverables may be ingestible devices and gut shuttles. In addition, ingestible devices may have potential to overcome the impact of food on oral bioavailability. However, clinical studies are necessary to inform the safety and efficacy of these emerging technologies.

Oral delivery of therapeutic peptides and proteins: Technology landscape of lipid-based nanocarriers

The oral administration of therapeutic peptides and proteins is favoured from a patient and commercial point of view. In order to reach the systemic circulation after oral administration, these drugs have to overcome numerous barriers including the enzymatic, sulfhydryl, mucus and epithelial barrier. The development of oral formulations for therapeutic peptides and proteins is therefore necessary. Among the most promising formulation approaches are lipid-based nanocarriers such as oil-in-water nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), liposomes and micelles. As the lipophilic character of therapeutic peptides and proteins can be tremendously increased such as by the formation of hydrophobic ion pairs (HIP) with hydrophobic counter ions, they can be incorporated in the lipophilic phase of these carriers. Since gastrointestinal (GI) peptidases as well as sulfhydryl compounds such as glutathione and dietary proteins are too hydrophilic to enter the lipophilic phase of these carriers, the incorporated therapeutic peptide or protein is protected towards enzymatic degradation as well as unintended thiol/disulfide exchange reactions. Stability of lipid-based nanocarriers towards lipases can be provided by the use to excipients that are not or just poorly degraded by these enzymes. Nanocarriers with a size <200 nm and a mucoinert surface such as PEG or zwitterionic surfaces exhibit high mucus permeating properties. Having reached the underlying absorption membrane, lipid-based nanocarriers enable paracellular and lymphatic drug uptake, induce endocytosis and transcytosis or simply fuse with the cell membrane releasing their payload into the systemic circulation. Numerous in vivo studies provide evidence for the potential of these delivery systems. Within this review we provide an overview about the different barriers for oral peptide and protein delivery, highlight the progress made on lipid-based nanocarriers in order to overcome them and discuss strengths and weaknesses of these delivery systems in comparison to other technologies.

New perspectives in oral peptide delivery

Owing to their structural diversity, peptides are a unique source of innovative active ingredients. However, their development has been challenging because of their disadvantageous pharmacokinetic (PK) properties. Over the past decade, many attempts have been made to improve the oral bioavailability of peptide drugs. In this review, we highlight the most recent and promising techniques aimed at the improvement of the oral bioavailability of peptides. The most recent findings will influence future approaches of pharmaceutical companies in the development of new, more efficient, and safer orally delivered peptides.

Oral self-nanoemulsifying formulation of GLP-1 agonist peptide exendin-4: development, characterization and permeability assesment on Caco-2 cell monolayer

The objective of this study was to prepare a stable self-nanoemulsifying formulation of exendin-4, which is an antidiabetic peptide. As exendin-4 is commercially available only in subcutaneous form, several attempts have been made to discover an effective oral formulation. Self-nanoemulsifying drug delivery systems are known to be suitable carriers for the oral administration of peptide drugs. Various ratios of oil, surfactant, and co-surfactant mixtures were used to determine the area in the pseudoternary phase diagram for clear nanoemulsion. The Design of Experiment approach was used for the optimization of the formulation. Blank self-nanoemulsifying formulations containing ethyl oleate as oil phase, Cremophor EL^®, and Labrasol^® as surfactant, absolute ethanol, and propylene glycol as co-solvent in various proportions were approximately 18-50 nm, 0.08-0.204 and - 3 to - 23 mV in droplet size, polydispersity index, and zeta potential, respectively. When all formulations were compared by statistical analysis, five of them with smaller droplet sizes were selected for further studies. The physical stability test was performed for 1 month at 5 °C ± 3 °C and 25 °C ± 2 °C/60% RH ± 5% RH storage conditions. As a result of the characterization and physical stability test results, ethyl oleate: Cremophor EL^®:absolute ethanol (30:52.5:17.5) formulation and four formulations containing ethyl oleate: Cremophor EL^®:Labrasol^®:propylene glycol:absolute ethanol at varying concentrations were considered for peptide encapsulation efficiency. Formulation having the highest encapsulation efficiency of exendin-4 containing ethyl oleate: Cremophor EL^®:Labrasol^®:propylene glycole:absolute ethanol (15:42.5:21.25:15.94:5.31) was selected for in vitro Caco-2 intestinal permeability study. The permeabiliy coefficient was increased by 1.5-folds by exendin-4-loaded self-nanoemulsifying formulation as compared to the exendin-4 solution. It can be concluded that intestinal permeability has been improved by self-nanoemulsifying formulation.

Self-Nano-Emulsifying Drug-Delivery Systems: From the Development to the Current Applications and Challenges in Oral Drug Delivery

Approximately one third of newly discovered drug molecules show insufficient water solubility and therefore low oral bio-availability. Self-nano-emulsifying drug-delivery systems (SNEDDSs) are one of the emerging strategies developed to tackle the issues associated with their oral delivery. SNEDDSs are composed of an oil phase, surfactant, and cosurfactant or cosolvent. SNEDDSs characteristics, their ability to dissolve a drug, and in vivo considerations are determinant factors in the choice of SNEDDSs excipients. A SNEDDS formulation can be optimized through phase diagram approach or statistical design of experiments. The characterization of SNEDDSs includes multiple orthogonal methods required to fully control SNEDDS manufacture, stability, and biological fate. Encapsulating a drug in SNEDDSs can lead to increased solubilization, stability in the gastro-intestinal tract, and absorption, resulting in enhanced bio-availability. The transformation of liquid SNEDDSs into solid dosage forms has been shown to increase the stability and patient compliance. Supersaturated, mucus-permeating, and targeted SNEDDSs can be developed to increase efficacy and patient compliance. Self-emulsification approach has been successful in oral drug delivery. The present review gives an insight of SNEDDSs for the oral administration of both lipophilic and hydrophilic compounds from the experimental bench to marketed products.

Evaluation of the hypoglycemic effect of exendin-4's new oral self-nanoemulsifying system in rats

The objective of this study is to develop a new self-nanoemulsifying system containing exendin-4 with or without enzyme inhibitor chymostatin and to evaluate the effects of oral administration of exendin-4 and exendin-4/chymostatin loaded self nanoemulsifying system on plasma exendin-4, plasma insulin, blood glucose levels and to compare with the oral and subcutaneous administration of exendin-4 in non-diabetic and streptozotocin-induced type 2 diabetic rats. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying system containing ethyl oleate as the oil phase, Cremophor EL®/Labrasol® as the surfactants and propylene glycol as the co-solvent were prepared. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4 loaded self-nanoemulsifying system were found as 24.28 ± 0.43 nm, 0.17 ± 0.01, -1.28 ± 3.61 mV, 79.60 ± 3.30 m.Pas, respectively. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4/chymostatin loaded self-nanoemulsifying system were found as 20.25 ± 0.35 nm, 0.11 ± 0.02, -1.85 ± 2.49 mV, 100.02 ± 7.65 m.Pas, respectively according to our previous study. In the present study, we focused on long-term physical stability studies, pharmacokinetic studies and pharmacodynamic studies of prepared self-nanoemulsifying systems. According to the long- term physical stability data, exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems were found stable both at 5°C ± 3°C and at 25°C ± 60% RH for 12 months. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems increased AUC and C_max values in non-diabetic rats compared to the oral exendin-4 solution. In diabetic rats, exendin-4/chymostatin loaded self nanoemulsifying systems increased C_max values compared to the exendin-4 solution. Exendin-4/chymostatin loaded self-nanoemulsifying system decreased inter-subject variability compared to commercial Byetta®. At 30^th minute after administration of exendin-4 loaded self-nanoemulsifying system, exendin-4/chymostatin loaded self nanoemulsifying system and Byetta®, blood glucose levels decreased to 23%, 25%, 29%, respectively. It has been shown that pharmacodynamic response is close to Byetta® with exendin-4/chymostatin self-nanoemulsifying system oral administration. In conclusion, a self nanoemulsifying system was found to be a suitable carrier system, and the combination with enzyme inhibitor chymostatin is thought to be promising for oral delivery of exendin-4.

Williams G, Brocchini S, Awwad S. Injectables and Depots to Prolong Drug Action of Proteins and Peptides

Proteins and peptides have emerged in recent years to treat a wide range of multifaceted diseases such as cancer, diabetes and inflammation. The emergence of polypeptides has yielded advancements in the fields of biopharmaceutical production and formulation. Polypeptides often display poor pharmacokinetics, limited permeability across biological barriers, suboptimal biodistribution, and some proclivity for immunogenicity. Frequent administration of polypeptides is generally required to maintain adequate therapeutic levels, which can limit efficacy and compliance while increasing adverse reactions. Many strategies to increase the duration of action of therapeutic polypeptides have been described with many clinical products having been developed. This review describes approaches to optimise polypeptide delivery organised by the commonly used routes of administration. Future innovations in formulation may hold the key to the continued successful development of proteins and peptides with optimal clinical properties.

Solid lipid nanocarriers diffuse effectively through mucus and enter intestinal cells - but where is my peptide?

Peptides are therapeutic molecules with high potential to treat a wide variety of diseases. They are large hydrophilic compounds for which absorption is limited by the intestinal epithelial border covered by mucus. This study aimed to evaluate the potential of Hydrophobic Ion Pairing combined with Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) to improve peptide transport across the intestinal border using Caco-2 cell monolayers (enterocyte-like model) and Caco-2/HT29-MTX co-cultured monolayers (mucin-secreting model). A Hydrophobic Ion Pair (HIP) was formed between Leuprolide (LEU), a model peptide, and sodium docusate. The marked increase in peptide lipophilicity enabled high encapsulation efficiencies in both NLC (84%) and SLN (85%). After co-incubation with the nanoparticles, confocal microscopy images of the cell monolayers demonstrated particles internalization and ability to cross mucus. Flow cytometry measurements confirmed that 82% of incubated SLN and 99% of NLC were internalized by Caco-2 cells. However, LEU transport across cell monolayers was not improved by the nanocarriers. Indeed, combination of particles platelet-shape and HIP low stability in the transport medium led to LEU burst release in this environment. Improvement of peptide lipidization should maintain encapsulation and enable benefit from nanocarriers enhanced intestinal transport.

Hydrophobic ion pairing of a GLP-1 analogue for incorporating into lipid nanocarriers designed for oral delivery

The lipophilic character of peptides can be tremendously improved by hydrophobic ion pairing (HIP) with counterions to be efficiently incorporated into lipid-based nanocarriers (NCs). Herein, HIPs of exenatide with the cationic surfactant tetraheptylammonium bromide (THA) and the anionic surfactant sodium docusate (DOC) were formed to increase its lipophilicity. These HIPs were incorporated into lipid based NCs comprising 41% Capmul MCM, 15% Captex 355, 40% Cremophor RH and 4% propylene glycol. Exenatide-THA NCs showed a log Dlipophilic phase (LPh)/release medium (RM) of 2.29 and 1.92, whereas the log DLPh/RM of exenatide-DOC was 1.2 and -0.9 in simulated intestinal fluid and Hanks' balanced salts buffer (HBSS), respectively. No significant hemolytic activity was induced at a concentration of 0.25% (m/v) of both blank and loaded NCs. Exenatide-THA NCs and exenatide-DOC NCs showed a 10-fold and 3-fold enhancement in intestinal apparent membrane permeability compared to free exenatide, respectively. Furthermore, orally administered exenatide-THA and exenatide-DOC NCs in healthy rats resulted in a relative bioavailability of 27.96 ± 5.24% and 16.29 ± 6.63%, respectively, confirming the comparatively higher potential of the cationic surfactant over the anionic surfactant. Findings of this work highlight the potential of the type of counterion used for HIP as key to successful design of lipid-based NCs for oral exenatide delivery.

Amelioration of lipophilic compounds in regards to bioavailability as self-emulsifying drug delivery system (SEDDS)

Background

High lipophilicity and poor aqueous solubility are the endemic problems of new drug molecules. Sixty to seventy percent of these drugs are unable to solubilize completely in aqueous media, or have very low permeability. This hampers their oral absorption and further leads to their poor bioavailability. Various researches are in progress to overcome these limitations. Novel technologies like nano-carrier systems have become popular for improving the solubility of drugs.

Main body

Lipid-based formulations, among nano systems, are taking pace for the enhancement of solubility, oral absorption, and hence the bioavailability of drugs. Among the lipid formulations, self-emulsification systems are gaining popularity by offering various advantages to delivery systems. Self-emulsifying drug delivery systems (SEDDS) are isotropic blends of oil and surfactant/co-surfactants. These ingredients upon gentle agitation in aqueous media results in the formation of o/w emulsion. In spite of many works published in SEDDS, the major concerns of this article are to discuss the various approaches to formulate a good lipid-based carrier system for poorly aqueous soluble drugs, role of various polymers, and their categories used in the formulation along-with the modern technologies used for enhancing the stability of liquid SEDDS. This review majorly focuses upon the problems related to the poor aqueous solubility of the newer lipid molecules and the solutions to overcome their solubility and in addition bioavailability.

Conclusion

As per the researches done in formulation and optimization of SEDDS for the enhancement of bioavailability of lipophilic molecules, it can be stated that the aqueous solubility as well as bioavailability can be increased by many folds compared to their marketed or other oral formulations.

Development and characterization of exendin-4 loaded self-nanoemulsifying system and in vitro evaluation on Caco-2 cell line

Aim: Aim of this study was to develop exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying drug delivery system (SNEDDS).Methods: Surfactants and co-surfactants were mixed, oil phase containing exendin-4 or exendin-4/chymostatin was added dropwise for SNEDDS. Short term physical stability test was performed prior to the release, lipolysis and permeability studies.Results: SNEDDS containing ethyl oleate: Cremophor EL^®: Labrasol^®: propylene glycole (15:42.5:21.25: 21.25) were selected for in vitro release and intestinal permeability studies for suitable parameters and physical stability test results. SNEDDS were obtained which yielded Grade B nanoemulsions having droplet size below 25 nm. In vitro release studies showed that 73.79% of the peptide was released for 2 h at pH 6.8. Both exendin-4 and exendin-4/chymostatin loaded SNEDDS were non-toxic to Caco-2 cells. Permeability coefficients of both exendin-4 loaded SNEDDS and exendin-4/chymostatin loaded SNEDDS were higher than exendin-4 solution.Conclusions: Intestinal permeability of exendin-4 has been improved by SNEDDS formulations.

Solidification of SMEDDS by fluid bed granulation and manufacturing of fast drug release tablets

Solidification of self-microemulsifying drug delivery systems (SMEDDS) is a rising experimental field with important potential for pharmaceutical industry, however fluid-bed granulation with SMEDDS is yet an unexplored solidification technique. The aim of the study was to solidify carvedilol-loaded SMEDDS utilizing fluid bed granulation process and to investigate how the formulation variables (type of solid carrier, optimization of granulation dispersion) and fluid-bed granulation process variables can be optimized in order to achieve suitable agglomeration process, high drug loading and appropriate product characteristics. Obtained granulates exhibited complete drug release, comparable to liquid SMEDDS and superior to crystalline carvedilol, nevertheless compromise between large SMEDDS loading and appropriate flow properties of the granules has to be made. Representative granulates with highest drug loading were further compressed into tablets. It was shown that the optimal excipient selection of compression mixture and compression force can lead to fast carvedilol release even from the tablets. Selfmicroemulsifying properties were not impaired neither after the solidification process and nor after the compression of solid SMEDDS into tablets. This suggests that fluid-bed granulation with SMEDDS offers a perspective alternative for solidification of the SMEDDS, enabling preservation of self-microemulsifying properties, acceptable drug loading and complete drug release.

Phosphorylated PEG-emulsifier: Powerful tool for development of zeta potential changing self-emulsifying drug delivery systems (SEDDS)

AIM

It was the aim of this study to synthesize a phosphorylated emulsifier possessing a PEG-linker for establishment of a potent zeta potential changing system in self-emulsifying drug delivery systems (SEDDS).

METHODS

N,N'-Bis(polyoxyethylene)oleylamine (POA) was phosphorylated utilizing pyrophosphoric acid. Successful synthesis of POA bisphosphate (POAP) was confirmed by NMR and HR CS MAS. After incorporation of 1% POAP into SEDDS (Kolliphor RH 40, Capmul PG-8, Labrafac Lipophile WL 1349, Labrafac PG; 30/20/20/30, v/v), according emulsions were incubated with intestinal alkaline phosphatase (IAP) and the zeta potential was measured. Additionally, the amount of released phosphate upon incubation with IAP or on Caco-2 cells was quantified by malachite green assay. Finally, cell viability studies on Caco-2 cells were performed and mucus permeation properties with and without IAP preincubation were assessed.

RESULTS

POAP was synthesized as brown viscous liquid with a yield of 36% and could be incorporated into SEDDS. By incubation with IAP a zeta potential shift from -15.1 to 6.5 mV was observed. A corresponding phosphate release in presence of isolated IAP as well as on Caco-2 cells was found. Assessment of the cytotoxic potential revealed no significant alteration in the safety profile of SEDDS by incorporation of POAP. Mucus permeation studies exposed a 2-fold higher permeation of fluorescein diacetate (FDA) having been embedded in SEDDS loaded with POAP in comparison to blank formulation and 3-fold higher permeability than for emulsions having been preincubated with phosphatase.

CONCLUSION

The novel phosphorylated surfactant exhibiting a PEG-linker facilitated a potent zeta potential change of SEDDS.

Recent Advances in Encapsulation, Protection, and Oral Delivery of Bioactive Proteins and Peptides using Colloidal Systems

There are many areas in medicine and industry where it would be advantageous to orally deliver bioactive proteins and peptides (BPPs), including ACE inhibitors, antimicrobials, antioxidants, hormones, enzymes, and vaccines. A major challenge in this area is that many BPPs degrade during storage of the product or during passage through the human gut, thereby losing their activity. Moreover, many BPPs have undesirable taste profiles (such as bitterness or astringency), which makes them unpleasant to consume. These challenges can often be overcome by encapsulating them within colloidal particles that protect them from any adverse conditions in their environment, but then release them at the desired site-of-action, which may be inside the gut or body. This article begins with a discussion of BPP characteristics and the hurdles involved in their delivery. It then highlights the characteristics of colloidal particles that can be manipulated to create effective BPP-delivery systems, including particle composition, size, and interfacial properties. The factors impacting the functional performance of colloidal delivery systems are then highlighted, including their loading capacity, encapsulation efficiency, protective properties, retention/release properties, and stability. Different kinds of colloidal delivery systems suitable for encapsulation of BPPs are then reviewed, such as microemulsions, emulsions, solid lipid particles, liposomes, and microgels. Finally, some examples of the use of colloidal delivery systems for delivery of specific BPPs are given, including hormones, enzymes, vaccines, antimicrobials, and ACE inhibitors. An emphasis is on the development of food-grade colloidal delivery systems, which could be used in functional or medical food applications. The knowledge presented should facilitate the design of more effective vehicles for the oral delivery of bioactive proteins and peptides.

In-vitro evaluation of solid lipid nanoparticles: Ability to encapsulate, release and ensure effective protection of peptides in the gastrointestinal tract

Peptides are rarely orally administrated due to rapid degradation in the gastrointestinal tract and low absorption at the epithelial border. The objective of this study was to encapsulate a model water-soluble peptide in biodegradable and biocompatible solid lipid-based nanoparticles, i.e. Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) in order to protect it from metabolic degradation. Leuprolide (LEU) and a LEU-docusate Hydrophobic Ion Pair (HIP) were encapsulated in SLN and NLC by High Pressure Homogenization. The particles were characterized regarding their Encapsulation Efficiency (EE), size, morphology, peptide release in FaSSIF-V2, and protective effect towards proteases. Nanoparticles of 120 nm with platelet structures were obtained. Formation of HIP led to a significant increase in LEU EE. Particle size was moderately affected by the presence of simulated fluids. Nonetheless, an important burst release was observed upon dispersion in FaSSIF-V2. NLC were able to improve LEU-HIP resistance to enzymatic degradation induced by trypsin but presented no advantages in presence of α-chymotrypsin. SLN provided no protection regarding both proteases. Despite an increased amount of encapsulated peptide in solid lipid-based nanoparticles following HIP formation, the important specific surface area linked to their platelet structures resulted in an important peptide release upon dispersion in FaSSIF-V2 and limited protection towards enzymatic degradation.

SEDDS: A game changing approach for the oral administration of hydrophilic macromolecular drugs

Since the development of self-emulsifying drug delivery systems (SEDDS) in 1980's, they attract the attention of researchers in order to confront the challenge of poor water-solubility of orally given drugs. Within recent years, SEDDS were also discovered for oral administration of hydrophilic macromolecular drugs such as peptides, proteins, polysaccharides and pDNA. Due to hydrophobic ion pairing (HIP) with oppositely charged lipophilic auxiliary agents the resulting complexes can be incorporated in the lipophilic phase of SEDDS. Depending on the solubility of the complex in the SEDDS pre-concentrate and in the release medium drug release can be adjusted on purpose by choosing more or less lipophilic auxiliary agents in appropriate quantities for HIP. Within the oily droplets formed in the GI-tract drugs are protected towards degradation by proteases and nucleases and thiol-disulfide exchange reactions with dietary proteins. The oily droplets can be made mucoadhesive or highly mucus permeating depending on their target site. Furthermore, even their cellular uptake properties can be tuned by adjusting their zeta potential or decorating them with cell penetrating peptides. The potential of SEDDS for oral administration of hydrophilic macromolecular drugs could meanwhile be demonstrated via various in vivo studies showing a bioavailability at least in the single digit percentage range. Owing to these properties advanced SEDDS turned out to be a game changing approach for the oral administration of hydrophilic macromolecular drugs.

Successful development of oral SEDDS: screening of excipients from the industrial point of view

Oral administration is the most accepted and favored route as various side effects such as fear, pain and risk of infections can be avoided resulting in a comparatively high patient compliance. However, from the industrial point of view the development of oral delivery systems is still challenging as various drugs are poorly soluble as well as slightly permeable leading to low bioavailability. As self-emulsifying drug delivery systems are able to incorporate both hydrophobic and hydrophilic drugs, these carrier systems have received more and more attention within the last years. Based on the broad range of currently available excipients, this review provides a kind of guideline for the selection of excipients useful to improve bioavailability of the drug on the one hand. As the regulatory status of potential excipients are highly important to introduce the formulation on the market, the review is focused on the other hand on excipients listed in the IIG database of the FDA by taking their corresponding maximum concentration into account. Furthermore, the issue of oral sensation and taste masking is discussed useful for the development of intraoral SEDDS.

Self-emulsifying drug delivery system: Mucus permeation and innovative quantification technologies

Mucus is a dynamic barrier which covers and protects the underlying mucosal epithelial membrane against bacteria and foreign particles. This protection mechanism extends to include therapeutic macromolecules and nanoparticles (NPs) through trapping of these particles. Mucus is not only a physical barrier that limiting particles movements based on their sizes but it selectively binds with particles through both hydrophilic and lipophilic interactions. Therefore, nano-carriers for mucosal delivery should be designed to eliminate entrapment by the mucus barrier. For this reason, different strategies have been approached for both solid nano-carriers and liquid core nano-carriers to synthesise muco-diffusive nano-carrier. Among these nano-strategies, Self-Emulsifying Drug Delivery System (SEDDS) was recognised as very promising nano-carrier for mucus delivery. The system was introduced to enhance the dissolution and bioavailability of orally administered insoluble drugs. SEDDS has shown high stability against intestinal enzymatic activity and more importantly, relatively rapid permeation characteristics across mucus barrier. The high diffusivity of SEDDS has been tested using various in vitro measurement techniques including both bulk and individual measurement of droplets diffusion within mucus. The selection and processing of an optimum in vitro technique is of great importance to avoid misinterpretation of the diffusivity of SEDDS through mucus barrier. In conclusion, SEDDS is a system with high capacity to diffuse through intestinal mucus even though this system has not been studied to the same extent as solid nano-carriers.

Intact anti-LPS IgY is found in the blood after intragastric administration in mice

Severe burn injury and cirrhosis often cause the translocation of bacterial endotoxins into blood, leading to systemic damage and even death. Our previous studies have shown that anti‐lipopolysaccharide egg yolk antibody (anti‐LPS IgY) can neutralize bacterial endotoxins in vitro and in vivo effectively, thereby reducing endotoxin damage. Whether anti‐LPS IgY can be absorbed into the blood through the intestinal barrier and neutralize endotoxins in circulation remains unclear. In this study, we used in vivo small animal imaging techniques, protein purification, molecular biology, and mass spectrometry to show that intragastrically administered anti‐LPS IgY is detected in the blood of mice as an intact molecule and has the capacity to bind to LPS. Immunohistochemical analysis confirmed that anti‐LPS IgY is associated with the intestinal mucosa of mice. However, the route of absorption of this large protein molecule was not determined. This study suggests that anti‐LPS IgY can be absorbed into the circulation, with the same molecular mass as purified anti‐LPS IgY as a macromolecular protein, suggesting a new strategy for the prevention of damage caused by endotoxins.

Efficacy of a novel LyP-1-containing self-microemulsifying drug delivery system (SMEDDS) for active targeting to breast cancer

An ideal cancer therapy targets the tumor cells selectively without damaging healthy tissues. Even though the tumor-specific markers are limited, these molecules can be used for the delivery of anti-cancer drugs as an active targeting strategy. Since the lymphatic system plays a critical role in the dissemination of cancer cells, the drugs directed through lymphatics can feasibly reach to the sites of metastasis. LyP-1 is a peptide that binds to the p32 receptor which is highly expressed not only on the lymphatic endothelium but also on the malignant cells; thus, making this peptide ligand a preferable candidate to mediate active targeting of lymphatics and cancer cells. In this study, different formulations of LyP-1 containing lipid-based nanopharmaceutics so-called self-microemulsifying drug delivery systems (SMEDDS) were developed and tested for their efficacy in targeting breast cancer. Following the selection of non-toxic formulation, doxorubicin hydrochloride and LyP-1 were co-administered in the SMEDDS, which resulted in a significant increase in in vitro cytotoxicity in p32-expressing breast cancer cells, 4T1 and MDA-MB-231. Accordingly, the uptake of LyP-1 in the SMEDDS by the cancer cells was demonstrated. The expression of p32 was detected in the 4T1 tumor tissues which were efficiently targeted with LyP-1 in the SMEDDS. When doxorubicin was co-administrated with LyP-1 in SMEDDS via intraperitonial administration, tumor growth and metastasis were significantly reduced. In conclusion, a novel and efficacious SMEDDS formulation containing LyP-1 with a droplet size less than 100 nm was developed for the lymphatic targeting of breast cancer.

Self-emulsifying drug delivery systems and cationic surfactants: do they potentiate each other in cytotoxicity?

OBJECTIVES

The aim of this study was to evaluate the cytotoxicity of self-emulsifying drug delivery systems (SEDDS) containing five different cationic surfactants.

METHODS

Cationic surfactants were added in a concentration of 1% and 5% (m/m) to SEDDS comprising 30% Capmul MCM, 30% Captex 355, 30% Cremophor EL and 10% propylene glycol. The resulting formulations were characterized in terms of size, zeta potential, in-vitro haemolytic activity and toxicity on Caco-2 via MTT assay and lactate dehydrogenase release assay.

KEY FINDINGS

The evaluated surfactants had in both concentrations a minor impact on the size of SEDDS ranging from 30.2 ± 0.6 to 55.4 ± 1.1 nm, whereas zeta potential changed significantly from -9.0 ± 0.3 to +28.8 ± 1.6 mV. The overall cytotoxicity of cationic surfactants followed the rank order: hexadecylpyridinium chloride > benzalkonium chloride > alkyltrimethylammonium bromide > octylamine > 1-decyl-3-methylimidazolium. The haemolytic activity of the combination of cationic surfactants and SEDDS on human red blood cells was synergistic. Furthermore, cationic SEDDS exhibited higher cytotoxicity of Caco-2 cells compared to SEDDS without cationic surfactants.

CONCLUSIONS

According to these results, SEDDS and cationic surfactants seem to bear an additive up to synergistic toxic risk.

Amikacin-containing self-emulsifying delivery systems via pulmonary administration for treatment of bacterial infections of cystic fibrosis patients

Aim: The aim of the study was to develop self-emulsifying delivery systems (SEDDS) exhibiting improved permeation rate for pulmonary delivery of amikacin for treatment of cystic fibrosis (CF) patients. Materials & methods: Solubility of amikacin in lipids was improved by hydrophobic ion pairing with sodium myristyl sulfate. The complex was loaded into SEDDS. Drug-release studies were performed and the permeation properties of SEDDS through human CF mucus were examined. Results: A total of 10% complex could be loaded into SEDDS. SEDDS exhibited sustained release. Up to twofold more amounts of amikacin permeated through the CF mucus compared with reference. Conclusion: The developed SEDDS with amikacin may be a promising tool for the treatment of certain bacterial infections of CF patients.

Mucus permeating self-emulsifying drug delivery systems (SEDDS): About the impact of mucolytic enzymes

This study aimed to improve the mucus permeating properties of self-emulsifying drug delivery systems (SEDDS) by anchoring lipidized bromelain, papain and trypsin using palmitoyl chloride. SEDDS containing enzyme-palmitate conjugates were characterized regarding droplet size and zeta potential. Their mucus permeating properties were evaluated by Transwell diffusion and rotating tube method using fluorescein diacetate (FDA) as marker. Degree of substitution of modified enzymes was 35.3%, 47.8% and 38.5% for bromelain-palmitate, papain-palmitate and trypsin-palmitate, respectively. SEDDS as control and SEDDS containing enzyme-palmitate conjugates displayed a droplet size less than 50nm and 180-312nm as well as a zeta potential of -3 to -4 and -4 to -5mV, respectively. The highest percentage of permeation was achieved by introducing 5% papain-palmitate into SEDDS. It could enhance the mucus permeation of SEDDS in porcine intestinal mucus 4.6-fold and 2-fold as evaluated by Transwell diffusion and rotating tube method, respectively. It is concluded that mucus permeation of SEDDS can be strongly improved by incorporation of enzyme-palmitate conjugates.

Oral delivery of biologics using drug-device combinations

Orally administered devices could enable the systemic uptake of biologic therapeutics by engineering around the physiological barriers present in the gastrointestinal (GI) tract. Such devices aim to shield cargo from degradative enzymes and increase the diffusion rate of medication through the GI mucosa. In order to achieve clinical relevance, these designs must significantly increase systemic drug bioavailability, deliver a clinically relevant dose and remain safe when taken frequently. Such an achievement stands to reduce our dependence on needle injections, potentially increasing patient adherence and reducing needle-associated complications. Here we discuss the physical and chemical constraints imposed by the GI organs and use these to develop a set of boundary conditions on oral device designs for the delivery of macromolecules. We critically examine how device size affects the rate of intestinal obstruction and hinders the loading capacity of poorly soluble protein drugs. We then discuss how current orally administered devices could solve the problem of tissue permeation and conclude that these physical methods stand to provide an efficacious set of alternatives to the classic hypodermic needle.