Force-induced DNA slippage

Maturation of siRNA by strand separation: Steered molecular dynamics study

RNA interference, particularly siRNA induced gene silencing is becoming an important avenue of modern therapeutics. The siRNA is delivered to the cells as short double helical RNA which becomes single stranded for forming the RISC complex. Significant experimental evidence is available for most of the steps except the process of the separation of the two strands. We have attempted to understand the pathway for double stranded siRNA (dsRNA) to single stranded (ssRNA) molecules using steered molecular dynamics simulations. As the process is completely unexplored we have applied force from all possible directions restraining all possible residues to convert dsRNA to ssRNA. We found pulling one strand along the helical axis direction restraining the far end of the other strand demands excessive force for ssRNA formation. Pulling a central residue of one strand, in a direction perpendicular to the helix axis, while keeping the base paired residue fixed requires intermediate force for strand separation. Moreover, we found that in this process the force requirement is quite high for the first bubble formation (nucleation energy) and the bubble propagation energies are quite small. We believe the success rate of the design of siRNA sequences for gene silencing may increase if this mechanistic knowledge is utilized for such a design process.Communicated by Ramaswamy H. Sarma.

Antitumor drugs effect on the stability of double-stranded DNA: steered molecular dynamics analysis

Denaturation of the DNA double helix inside the cell is essential for cellular processes such as replication and transcription for the growth of the cells. However, the growth of unwanted cells, which are responsible for cancerous kind of disease, is one of the biggest challenges of modern therapeutics. DNA cross-linking agents may kill cancer cells by damaging their DNA and stopping them from dividing. In the present study, we have carried out steered molecular dynamics simulations to study the effects of rupture and unzipping forces on the stability of dsDNA in the absence and presence of covalently bonded drugs. We have found that the stability of dsDNA increases strongly in the presence of covalently bonded drugs. The microscopic study of disruption of hydrogen-bonds associated with base-pairs of the dsDNA and the study of the variation of stacking overlap parameters gives evidence of symmetry during the rupture and asymmetry in the unzip event. The significance of the mechanism of force-induced melting study of the dsDNA in the absence and presence of antitumor drugs might have a biological relevance as it provides a pathway to open the double helix in a specific position and may help for the pharmaceutical design of drugs.Communicated by Ramaswamy H. Sarma.

Salt-induced conformational switching of a flat rectangular DNA origami structure

A rectangular DNA origami structure is one of the most studied and often used motif for applications in DNA nanotechnology. Here, we present two assays to study structural changes in DNA nanostructures and reveal a reversible rolling-up of the rectangular DNA origami structure induced by bivalent cations such as magnesium or calcium. First, we applied one-color and two-color superresolution DNA-PAINT with protruding strands along the long edges of the DNA origami rectangle. At increasing salt concentration, a single line instead of two lines is observed as a first indicator of rolling-up. Two-color measurements also revealed different conformations with parallel and angled edges. Second, we placed a gold nanoparticle and a dye molecule at different positions on the DNA origami structure. Distance dependent fluorescence quenching by the nanoparticle reports on dynamic transitions as well as it provides evidence that the rolling-up occurs preferentially along the diagonal of the DNA origami rectangle. The results will be helpful to test DNA structural models and the assays presented will be useful to study further structural transitions in DNA nanotechnology.

Effect of loop sequence on unzipping of short DNA hairpins

The dependence of stability on the sequence of a DNA hairpin has been investigated through atomistic simulations. For this, a sequence of 16 bases of a hairpin, which consists of a loop of four bases and a stem of six base pairs, has been considered. We have taken eight different sequences, where the first five base pairs were kept fixed in all sequences, whereas the loop sequence and the identity of the duplex base pair closing the loop have been varied. For these hairpin structures, force-induced melting (unzipping) studies were carried out to investigate the effect of the variables on the stability of hairpin. The temperature at which half of the base pairs are open is termed the melting temperature. We defined the unzipping force F_{h} (half of the base pairs are open) and showed that it may not provide the effect of closing the base pair or loop sequence on the stability of the DNA hairpin. In order to have a better understanding of the stability of a DNA hairpin, the closing base pair or hairpin loop must be open. This requires complete opening of the stem. We defined a force F_{c} at which all base pairs of the stem are open, and we showed that the F_{c} gives better understanding of DNA hairpin stability.

Shear-driven rolling of DNA-adhesive microspheres

Many biologically important cell binding processes, such as the rolling of leukocytes in the vasculature, are multivalent, being mediated by large numbers of weak binding ligands. Quantitative agreement between experiments and models of rolling has been elusive and often limited by the poor understanding of the binding and unbinding kinetics of the ligands involved. Here, we present a cell-free experimental model for such rolling, consisting of polymer microspheres whose adhesion to a glass surface is mediated by ligands with well-understood force-dependent binding free energy-short complementary DNA strands. We observe robust rolling activity for certain values of the shear rate and the grafted DNA strands' binding free energy and force sensitivity. The simulation framework developed to model leukocyte rolling, adhesive dynamics, quantitatively captures the mean rolling velocity and lateral diffusivity of the experimental particles using known values of the experimental parameters. Moreover, our model captures the velocity variations seen within the trajectories of single particles. Particle-to-particle variations can be attributed to small, plausible differences in particle characteristics. Overall, our findings confirm that state-of-the-art adhesive dynamics simulations are able to capture the complex physics of particle rolling, boding well for their extension to modeling more complex systems of rolling cells.

Evolutionary history of cotranscriptional editing in the paramyxoviral phosphoprotein gene

The phosphoprotein gene of the paramyxoviruses encodes multiple protein products. The P, V, and W proteins are generated by transcriptional slippage. This process results in the insertion of non-templated guanosine nucleosides into the mRNA at a conserved edit site. The P protein is an essential component of the viral RNA polymerase and is encoded by a faithful copy of the gene in the majority of paramyxoviruses. However, in some cases, the non-essential V protein is encoded by default and guanosines must be inserted into the mRNA in order to encode P. The number of guanosines inserted into the P gene can be described by a probability distribution, which varies between viruses. In this article, we review the nature of these distributions, which can be inferred from mRNA sequencing data, and reconstruct the evolutionary history of cotranscriptional editing in the paramyxovirus family. Our model suggests that, throughout known history of the family, the system has switched from a P default to a V default mode four times; complete loss of the editing system has occurred twice, the canonical zinc finger domain of the V protein has been deleted or heavily mutated a further two times, and the W protein has independently evolved a novel function three times. Finally, we review the physical mechanisms of cotranscriptional editing via slippage of the viral RNA polymerase.

Force-Induced Unravelling of DNA Origami

The mechanical properties of DNA nanostructures are of widespread interest as applications that exploit their stability under constant or intermittent external forces become increasingly common. We explore the force response of DNA origami in comprehensive detail by combining AFM single molecule force spectroscopy experiments with simulations using oxDNA, a coarse-grained model of DNA at the nucleotide level, to study the unravelling of an iconic origami system: the Rothemund tile. We contrast the force-induced melting of the tile with simulations of an origami 10-helix bundle. Finally, we simulate a recently proposed origami biosensor, whose function takes advantage of origami behavior under tension. We observe characteristic stick-slip unfolding dynamics in our force-extension curves for both the Rothemund tile and the helix bundle and reasonable agreement with experimentally observed rupture forces for these systems. Our results highlight the effect of design on force response: we observe regular, modular unfolding for the Rothemund tile that contrasts with strain-softening of the 10-helix bundle which leads to catastropic failure under monotonically increasing force. Further, unravelling occurs straightforwardly from the scaffold ends inward for the Rothemund tile, while the helix bundle unfolds more nonlinearly. The detailed visualization of the yielding events provided by simulation allows preferred pathways through the complex unfolding free-energy landscape to be mapped, as a key factor in determining relative barrier heights is the extensional release per base pair broken. We shed light on two important questions: how stable DNA nanostructures are under external forces and what design principles can be applied to enhance stability.

Manipulation of double-stranded DNA melting by force

By integrating elasticity-as described by the Gaussian network model-with bond binding energies that distinguish between different base-pair identities and stacking configurations, we study the force induced melting of a double-stranded DNA (dsDNA). Our approach is a generalization of our previous study of thermal dsDNA denaturation [J. Chem. Phys. 145, 144101 (2016)JCPSA60021-960610.1063/1.4964285] to that induced by force at finite temperatures. It allows us to obtain semimicroscopic information about the opening of the chain, such as whether the dsDNA opens from one of the ends or from the interior, forming an internal bubble. We study different types of force manipulation: (i) "end unzipping," with force acting at a single end base pair perpendicular to the helix, (ii) "midunzipping," with force acting at a middle base pair perpendicular to the helix, and (iii) "end shearing," where the force acts at opposite ends along the helix. By monitoring the free-energy landscape and probability distribution of intermediate denaturation states, we show that different dominant intermediate states are stabilized depending on the type of force manipulation used. In particular, the bubble state of the sequence L60B36, which we have previously found to be a stable state during thermal denaturation, is absent for end unzipping and end shearing, whereas very similar bubbles are stabilized by midunzipping, or when the force location is near the middle of the chain. Ours results offer a simple tool for stabilizing bubbles and loops using force manipulations at different temperatures, and may implicate on the mechanism in which DNA enzymes or motors open regions of the chain.

Single-cell mechanogenetics using monovalent magnetoplasmonic nanoparticles

Spatiotemporal interrogation of signal transduction at the single-cell level is necessary to answer a host of important biological questions. This protocol describes a nanotechnology-based single-cell and single-molecule perturbation tool, termed mechanogenetics, that enables precise spatial and mechanical control over genetically encoded cell-surface receptors in live cells. The key components of this tool are a magnetoplasmonic nanoparticle (MPN) actuator that delivers defined spatial and mechanical cues to receptors through target-specific one-to-one engagement and a micromagnetic tweezers (μMT) that remotely controls the magnitude of force exerted on a single MPN. In our approach, a SNAP-tagged cell-surface receptor of interest is conjugated with a single-stranded DNA oligonucleotide, which hybridizes to its complementary oligonucleotide on the MPN. This protocol consists of four major stages: (i) chemical synthesis of MPNs, (ii) conjugation with DNA and purification of monovalent MPNs, (iii) modular targeting of MPNs to cell-surface receptors, and (iv) control of spatial and mechanical properties of targeted mechanosensitive receptors in live cells by adjusting the μMT-to-MPN distance. Using benzylguanine (BG)-functionalized MPNs and model cell lines expressing either SNAP-tagged Notch or vascular endothelial cadherin (VE-cadherin), we provide stepwise instructions for mechanogenetic control of receptor clustering and for mechanical receptor activation. The ability of this method to differentially control spatial and mechanical inputs to targeted receptors makes it particularly useful for interrogating the differential contributions of each individual cue to cell signaling. The entire procedure takes up to 1 week.

Probing of miniPEGγ-PNA-DNA Hybrid Duplex Stability with AFM Force Spectroscopy

Peptide nucleic acids (PNA) are synthetic polymers, the neutral peptide backbone of which provides elevated stability to PNA-PNA and PNA-DNA hybrid duplexes. It was demonstrated that incorporation of diethylene glycol (miniPEG) at the γ position of the peptide backbone increased the thermal stability of the hybrid duplexes (Sahu, B. et al. J. Org. Chem. 2011, 76, 5614-5627). Here, we applied atomic force microscopy (AFM) based single molecule force spectroscopy and dynamic force spectroscopy (DFS) to test the strength and stability of the hybrid 10 bp duplex. This hybrid duplex consisted of miniPEGγ-PNA and DNA of the same length (γ(MP)PNA-DNA), which we compared to a DNA duplex with a homologous sequence. AFM force spectroscopy data obtained at the same conditions showed that the γ(MP)PNA-DNA hybrid is more stable than the DNA counterpart, 65 ± 15 pN vs 47 ± 15 pN, respectively. The DFS measurements performed in a range of pulling speeds analyzed in the framework of the Bell-Evans approach yielded a dissociation constant, koff ≈ 0.030 ± 0.01 s⁻¹ for γ(MP)PNA-DNA hybrid duplex vs 0.375 ± 0.18 s⁻¹ for the DNA-DNA duplex suggesting that the hybrid duplex is much more stable. Correlating the high affinity of γ(MP)PNA-DNA to slow dissociation kinetics is consistent with prior bulk characterization by surface plasmon resonance. Given the growing interest in γ(MP)PNA as well as other synthetic DNA analogues, the use of single molecule experiments along with computational analysis of force spectroscopy data will provide direct characterization of various modifications as well as higher order structures such as triplexes and quadruplexes.

Statistical mechanics of DNA rupture: theory and simulations

We study the effects of the shear force on the rupture mechanism on a double stranded DNA. Motivated by recent experiments, we perform the atomistic simulations with explicit solvent to obtain the distributions of extension in hydrogen and covalent bonds below the rupture force. We obtain a significant difference between the atomistic simulations and the existing results in the literature based on the coarse-grained models (theory and simulations). We discuss the possible reasons and improve the coarse-grained model by incorporating the consequences of semi-microscopic details of the nucleotides in its description. The distributions obtained by the modified model (simulations and theoretical) are qualitatively similar to the one obtained using atomistic simulations.

Membrane protein stability depends on the concentration of compatible solutes--a single molecule force spectroscopic study

Compatible solutes are small, uncharged, zwitter ionic, osmotically active molecules produced and accumulated by microorganisms inside their cell to counteract different kinds of environmental stress. They enhance protein stability without interfering with the metabolic pathways even at molar concentrations. In this paper, we report the stabilizing effects of compatible solutes, ectoine, betaine and taurine on membrane protein bacteriorhodopsin at different concentrations. Using atomic force microscopy based single molecule force spectroscopy the impact of the osmolytes was quantified by measuring the forces required to pull the protein out of the membrane and the change in the persistence lengths of the unfolded polypeptide chain. Increase in unfolding forces were observed, indicating the strengthening of intramolecular interactions, which are vital for protein stability. The decrease in persistence lengths was recorded and showed increasing tendencies of the polypeptide strand to coil up. Interestingly, it was revealed that these molecules have different stabilizing effects on protein unfolding at different concentrations. The results show that the unfolding of single protein provides insight to the structure-dynamic relationship between the protein and compatible solute molecules at sub-nanometer scale. This also helps to understand the molecular mechanism involved in protein stabilization by organic osmolytes.

Direct force measurement of single DNA-peptide interactions using atomic force microscopy

The selective interactions between DNA and miniature (39 residues) engineered peptide were directly measured at the single-molecule level by using atomic force microscopy. This peptide (p007) contains an α-helical recognition site similar to leucine zipper GCN4 and specifically recognizes the ATGAC sequence in the DNA with nanomolar affinity. The average rupture force was 42.1 pN, which is similar to the unbinding forces of the digoxigenin-antidigoxigenin complex, one of the strongest interactions in biological systems. The single linear fit of the rupture forces versus the logarithm of pulling rates showed a single energy barrier with a transition state located at 0.74 nm from the bound state. The smaller koff compared with that of other similar systems was presumably due to the increased stability of the helical structure by putative folding residues in p007. This strong sequence-specific DNA-peptide interaction has a potential to be utilized to prepare well-defined mechanically stable DNA-protein hybrid nanostructures.

Modelling and inference reveal nonlinear length-dependent suppression of somatic instability for small disease associated alleles in myotonic dystrophy type 1 and Huntington disease

More than 20 human genetic diseases are associated with inheriting an unstable expanded DNA simple sequence tandem repeat, for example, CTG (cytosine-thymine-guanine) repeats in myotonic dystrophy type 1 (DM1) and CAG (cytosine-adenine-guanine) repeats in Huntington disease (HD). These sequences mutate by changing the number of repeats not just between generations, but also during the lifetime of affected individuals. Levels of somatic instability contribute to disease onset and progression but as changes are tissue-specific, age- and repeat length-dependent, interpretation of the level of somatic instability in an individual is confounded by these considerations. Mathematical models, fitted to CTG repeat length distributions derived from blood DNA, from a large cohort of DM1-affected or at risk individuals, have recently been used to quantify inherited repeat lengths and mutation rates. Taking into account age, the estimated mutation rates are lower than predicted among individuals with small alleles (inherited repeat lengths less than 100 CTGs), suggesting that these rates may be suppressed at the lower end of the disease-causing range. In this study, we propose that a length-specific effect operates within this range and tested this hypothesis using a model comparison approach. To calibrate the extended model, we used data derived from blood DNA from DM1 individuals and, for the first time, buccal DNA from HD individuals. In a novel application of this extended model, we identified individuals whose effective repeat length, with regards to somatic instability, is less than their actual repeat length. A plausible explanation for this distinction is that the expanded repeat tract is compromised by interruptions or other unusual features. We quantified effective length for a large cohort of DM1 individuals and showed that effective length better predicts age of onset than inherited repeat length, thus improving the genotype-phenotype correlation. Under the extended model, we removed some of the bias in mutation rates making them less length-dependent. Consequently, rates adjusted in this way will be better suited as quantitative traits to investigate cis- or trans-acting modifiers of somatic mosaicism, disease onset and progression.

Atomic force microscopy with sub-picoNewton force stability for biological applications

Atomic force microscopy (AFM) is widely used in the biological sciences. Despite 25 years of technical developments, two popular modes of bioAFM, imaging and single molecule force spectroscopy, remain hindered by relatively poor force precision and stability. Recently, we achieved both sub-pN force precision and stability under biologically useful conditions (in liquid at room temperature). Importantly, this sub-pN level of performance is routinely accessible using a commercial cantilever on a commercial instrument. The two critical results are that (i) force precision and stability were limited by the gold coating on the cantilevers, and (ii) smaller yet stiffer cantilevers did not lead to better force precision on time scales longer than 25 ms. These new findings complement our previous work that addressed tip-sample stability. In this review, we detail the methods needed to achieve this sub-pN force stability and demonstrate improvements in force spectroscopy and imaging when using uncoated cantilevers. With this improved cantilever performance, the widespread use of nonspecific biomolecular attachments becomes a limiting factor in high-precision studies. Thus, we conclude by briefly reviewing site-specific covalent-immobilization protocols for linking a biomolecule to the substrate and to the AFM tip.

Intramolecular folding in human ILPR fragment with three C-rich repeats

Enrichment of four tandem repeats of guanine (G) rich and cytosine (C) rich sequences in functionally important regions of human genome forebodes the biological implications of four-stranded DNA structures, such as G-quadruplex and i-motif, that can form in these sequences. However, there have been few reports on the intramolecular formation of non-B DNA structures in less than four tandem repeats of G or C rich sequences. Here, using mechanical unfolding at the single-molecule level, electrophoretic mobility shift assay (EMSA), circular dichroism (CD), and ultraviolet (UV) spectroscopy, we report an intramolecularly folded non-B DNA structure in three tandem cytosine rich repeats, 5'-TGTC4ACAC4TGTC4ACA (ILPR-I3), in the human insulin linked polymorphic region (ILPR). The thermal denaturation analyses of the sequences with systematic C to T mutations have suggested that the structure is linchpinned by a stack of hemiprotonated cytosine pairs between two terminal C4 tracts. Mechanical unfolding and Br(2) footprinting experiments on a mixture of the ILPR-I3 and a 5'-C4TGT fragment have further indicated that the structure serves as a building block for intermolecular i-motif formation. The existence of such a conformation under acidic or neutral pH complies with the strand-by-strand folding pathway of ILPR i-motif structures.

Effect of shear force on the separation of double-stranded DNA

Using the Langevin dynamics simulation, we have studied the effects of shear force on the rupture of short double-stranded DNA at different temperatures. We show that the rupture force increases linearly with chain length and approaches the asymptotic value in accordance with the experiment. The qualitative nature of these curves remains almost the same for different temperatures but with a shift in the force. We observe three different regimes in the extension of covalent bonds (backbone) under shear force.

Shear unzipping of double-stranded DNA

We use a simple nonlinear scaler displacement model to calculate the distribution of effects created by a shear stress on a double-stranded DNA (dsDNA) molecule and the value of shear force F(c) that is required to separate the two strands of a molecule at a given temperature. It is shown that for molecules of base pairs fewer than than 21, the entire single strand moves in the direction of applied force, whereas for molecules having base pairs more than 21, part of the strand moves in the opposite direction under the influence of force acting on the other strand. This result as well as the calculated values of F(c) as a function of length of dsDNA molecules are in very good agreement with the experimental values of Hatch et al. [Phys. Rev. E 78, 011920 (2008)].

Strand annealing and terminal transferase activities of a B-family DNA polymerase

DNA replication polymerases have the inherent ability to faithfully and rapidly copy a DNA template according to precise Watson-Crick base pairing. The primary B-family DNA replication polymerase (Dpo1) in the hyperthermophilic archaeon, Sulfolobus solfataricus, is shown here to possess a remarkable DNA stabilizing ability for maintaining weak base pairing interactions to facilitate primer extension. This thermal stabilization by Dpo1 allowed for template-directed synthesis at temperatures more than 30 °C above the melting temperature of naked DNA. Surprisingly, Dpo1 also displays a competing terminal deoxynucleotide transferase (TdT) activity unlike any other B-family DNA polymerase. Dpo1 is shown to elongate single-stranded DNA in template-dependent and template-independent manners. Experiments with different homopolymeric templates indicate that initial deoxyribonucleotide incorporation is complementary to the template. Rate-limiting steps that include looping back and annealing to the template allow for a unique template-dependent terminal transferase activity. The multiple activities of this unique B-family DNA polymerase make this enzyme an essential component for DNA replication and DNA repair for the maintenance of the archaeal genome at high temperatures.

Thiol-based, site-specific and covalent immobilization of biomolecules for single-molecule experiments

The success of single-molecule (SM) experiments critically depends on the functional immobilization of the biomolecule(s) to be studied. With the continuing trend of combining SM fluorescence with SM force experiments, methods are required that are suitable for both types of measurements. We describe a general protocol for the site-specific and covalent coupling of any type of biomolecule that can be prepared with a free thiol group. The protocol uses a poly(ethylene glycol) (PEG) spacer, which carries an N-hydroxy succinimide (NHS) group on one end and a maleimide group on the other. After reacting the NHS group with an amino-functionalized surface, the relatively stable but highly reactive maleimide group allows the coupling of the biomolecule. This protocol provides surfaces with low fluorescence background, low nonspecific binding and a large number of reactive sites. Surfaces containing immobilized biomolecules can be obtained within 6 h.

Single-Molecule Force Spectroscopy of DNA-Based Reversible Polymer Bridges: Surface Robustness and Homogeneity

Single-molecule force spectroscopy, as implemented in an atomic force microscope, provides a rarely-used method by which to monitor dynamic processes that occur near surfaces. Here, a methodology is presented and characterized that facilitates the study of polymer bridging across nanometer-sized gaps. The model system employed is that of DNA-based reversible polymers, and an automated procedure is introduced that allows the AFM tip-surface contact point to be automatically determined, and the distance d between opposing surfaces to be actively controlled. Using this methodology, the importance of several experimental parameters was systematically studied, e.g. the frequency of repeated tip/surface contacts, the area of the substrate surface sampled by the AFM, and the use of multiple AFM tips and substrates. Experiments revealed the surfaces to be robust throughout pulling experiments, so that multiple touches and pulls could be carried out on a single spot with no measurable affect on the results. Differences in observed bridging probabilities were observed, both on different spots on the same surface and, more dramatically, from one day to another. Data normalization via a reference measurement allows data from multiple days to be directly compared.

Time and distance dependence of reversible polymer bridging followed by single-molecule force spectroscopy

Polymer bridging between surfaces plays an important role in a range of fundamental processes in the material and life sciences. Bridges formed by main-chain reversible polymers differ from their covalent analogs in that they can dynamically adjust their size and shape in response to external stimuli and have the potential to reform following bond scission. In this work, the time and distance dependence of main-chain reversible polymer bridge formation are studied using an atomic force microscope. The bridging process was studied using single-molecule force spectroscopy, and its dependence on the distance between surfaces and equilibration time was probed. The number of bridges formed decreases as the gap width increases, from approximately 2 bridges per 14 s equilibration at separations of 5-15 nm to approximately 0.5 bridges per 14 s equilibration at separations of 35-45 nm. The kinetics of bridge formation appear to be slightly faster at smaller separations.

Affinity-matured recombinant antibody fragments analyzed by single-molecule force spectroscopy

For many applications, antibodies need to be engineered toward maximum affinity. Strategies are in demand to especially optimize this process toward slower dissociation rates, which correlate with the (un)binding forces. Using single-molecule force spectroscopy, we have characterized three variants of a recombinant antibody single-chain Fv fragment. These variants were taken from different steps of an affinity maturation process. Therefore, they are closely related and differ from each other by a few mutations only. The dissociation rates determined with the atomic force microscope differ by one order of magnitude and agree well with the values obtained from surface plasmon resonance measurements. However, the effective potential width of the binding complexes, which was derived from the dynamic force spectroscopy measurements, was found to be the same for the different mutants. The large potential width of 0.9 nm indicates that both the binding pocket and the peptide deform significantly during the unbinding process.

Print your atomic force microscope

Progress in scanning probe microscopy profited from a flourishing multitude of new instrument designs, which lead to novel imaging modes and as a consequence to innovative microscopes. Often these designs were hampered by the restrictions, which conventional milling techniques impose. Modern rapid prototyping techniques, where layer by layer is added to the growing piece either by light driven polymerization or by three-dimensional printing techniques, overcome this constraint, allowing highly concave or even embedded and entangled structures. We have employed such a technique to manufacture an atomic force microscopy (AFM) head, and we compared its performance with a copy milled from aluminum. We tested both AFM heads for single molecule force spectroscopy applications and found little to no difference in the signal-to-noise ratio as well as in the thermal drift. The lower E modulus seems to be compensated by higher damping making this material well suited for low noise and low drift applications. Printing an AFM thus offers unparalleled freedom in the design and the rapid production of application-tailored custom instruments.

B-S transition in short oligonucleotides

Stretching experiments with long double-stranded DNA molecules in physiological ambient revealed a force-induced transition at a force of 65 pN. During this transition between B-DNA and highly overstretched S-DNA the DNA lengthens by a factor of 1.7 of its B-form contour length. Here, we report the occurrence of this so-called B-S transition in short duplexes consisting of 30 basepairs. We employed atomic-force-microscope-based single molecule force spectroscopy to explore the unbinding mechanism of two short duplexes containing 30 or 20 basepairs by pulling at the opposite 5' termini. For a 30-basepair-long DNA duplex the B-S transition is expected to cause a length increase of 6.3 nm and should therefore be detectable. Indeed 30% of the measured force-extension curves exhibit a region of constant force (plateau) at 65 pN, which corresponds to the B-S transition. The observed plateaus show a length between 3 and 7 nm. This plateau length distribution indicates that the dissociation of a 30-basepair duplex mainly occurs during the B-S transition. In contrast, the measured force-extension curves for a 20-basepair DNA duplex exhibited rupture forces below 65 pN and did not show any evidence of a B-S transition.