High-resolution fine mapping and fluorescence in situ hybridization analysis of sun, a locus controlling tomato fruit shape, reveals a region of the tomato genome prone to DNA rearrangements

A catalogue of recombination coldspots in interspecific tomato hybrids

Increasing natural resistance and resilience in plants is key for ensuring food security within a changing climate. Breeders improve these traits by crossing cultivars with their wild relatives and introgressing specific alleles through meiotic recombination. However, some genomic regions are devoid of recombination especially in crosses between divergent genomes, limiting the combinations of desirable alleles. Here, we used pooled-pollen sequencing to build a map of recombinant and non-recombinant regions between tomato and five wild relatives commonly used for introgressive tomato breeding. We detected hybrid-specific recombination coldspots that underscore the role of structural variations in modifying recombination patterns and maintaining genetic linkage in interspecific crosses. Crossover regions and coldspots show strong association with specific TE superfamilies exhibiting differentially accessible chromatin between somatic and meiotic cells. About two-thirds of the genome are conserved coldspots, located mostly in the pericentromeres and enriched with retrotransposons. The coldspots also harbor genes associated with agronomic traits and stress resistance, revealing undesired consequences of linkage drag and possible barriers to breeding. We presented examples of linkage drag that can potentially be resolved by pairing tomato with other wild species. Overall, this catalogue will help breeders better understand crossover localization and make informed decisions on generating new tomato varieties.

Structural variants contribute to phenotypic variation in maize

Comprehensively identifying the loci shaping trait variation has been challenging, in part because standard approaches often miss many types of genetic variants. Structural variants, especially transposable elements are likely to affect phenotypic variation but we need better methods in maize for detecting polymorphic structural variants and TEs using short-read sequencing data. Here, we used a whole genome alignment between two maize genotypes to identify polymorphic structural variants and then genotyped a large maize diversity panel for these variants using short-read sequencing data. We characterized variation of SVs within the panel and identified SV polymorphisms that are associated with life history traits and genotype-by-environment interactions. While most of the SVs associated with traits contained TEs, only one of the SV's boundaries clearly matched TE breakpoints indicative of a TE insertion, whereas the other polymorphisms were likely caused by deletions. All of the SVs associated with traits were in linkage disequilibrium with nearby single nucleotide polymorphisms (SNPs), suggesting that this method did not identify variants that would have been missed in a SNP association study.

Down, then up: non-parallel genome size changes and a descending chromosome series in a recent radiation of the Australian allotetraploid plant species, Nicotiana section Suaveolentes (Solanaceae)

BACKGROUND AND AIMS

The extent to which genome size and chromosome numbers evolve in concert is little understood, particularly after polyploidy (whole-genome duplication), when a genome returns to a diploid-like condition (diploidization). We study this phenomenon in 46 species of allotetraploid Nicotiana section Suaveolentes (Solanaceae), which formed <6 million years ago and radiated in the arid centre of Australia.

METHODS

We analysed newly assessed genome sizes and chromosome numbers within the context of a restriction site-associated nuclear DNA (RADseq) phylogenetic framework.

KEY RESULTS

RADseq generated a well-supported phylogenetic tree, in which multiple accessions from each species formed unique genetic clusters. Chromosome numbers and genome sizes vary from n = 2x = 15 to 24 and 2.7 to 5.8 pg/1C nucleus, respectively. Decreases in both genome size and chromosome number occur, although neither consistently nor in parallel. Species with the lowest chromosome numbers (n = 15-18) do not possess the smallest genome sizes and, although N. heterantha has retained the ancestral chromosome complement, n = 2x = 24, it nonetheless has the smallest genome size, even smaller than that of the modern representatives of ancestral diploids.

CONCLUSIONS

The results indicate that decreases in genome size and chromosome number occur in parallel down to a chromosome number threshold, n = 20, below which genome size increases, a phenomenon potentially explained by decreasing rates of recombination over fewer chromosomes. We hypothesize that, more generally in plants, major decreases in genome size post-polyploidization take place while chromosome numbers are still high because in these stages elimination of retrotransposons and other repetitive elements is more efficient. Once such major genome size change has been accomplished, then dysploid chromosome reductions take place to reorganize these smaller genomes, producing species with small genomes and low chromosome numbers such as those observed in many annual angiosperms, including Arabidopsis.

Genetic basis of the lobedness degree in tomato fruit morphology

Fruit shape is a key trait in tomato (Solanum lycopersicum L.). Since most studies focused on proximo-distal fruit morphology, we hypothesized that unknown QTLs for medio-lateral direction ones could be found analysing segregating populations where major shape genes are fixed. We examined the diversity of fruit morphology in medio-lateral direction; defined divergent traits in cultivars carrying identical genetic constitution at LC and FAS genes; and identified QTLs for lobedness degree (LD) by a QTL-seq approach. We found that LC and FAS genes were not enough to explain LD variability in a large tomato collection. Then, we derived F₂ populations crossing cultivars divergent for LD where LC and FAS were fixed (Yellow Stuffer x Heinz 1439 [F₂YSxH] and Voyage x Old Brooks [F₂VxOB]). By QTL-seq we identified a QTL for LD on chromosome 8 in both F₂, which was validated in F₂YSxH by interval mapping accounting for ~ 17% of the variability. Other two QTLs located on chromosomes 6 and 11 with epistasis explained ~ 61% of the variability in the F₂VxOB. In conclusion, three novel QTLs with major effect for LD (ld6, ld8, and ld11) were identified through the study of diversity and genetic segregation in intraspecific tomato crosses.

Atlas of phenotypic, genotypic and geographical diversity present in the European traditional tomato

The Mediterranean basin countries are considered secondary centres of tomato diversification. However, information on phenotypic and allelic variation of local tomato materials is still limited. Here we report on the evaluation of the largest traditional tomato collection, which includes 1499 accessions from Southern Europe. Analyses of 70 traits revealed a broad range of phenotypic variability with different distributions among countries, with the culinary end use within each country being the main driver of tomato diversification. Furthermore, eight main tomato types (phenoclusters) were defined by integrating phenotypic data, country of origin, and end use. Genome-wide association study (GWAS) meta-analyses identified associations in 211 loci, 159 of which were novel. The multidimensional integration of phenoclusters and the GWAS meta-analysis identified the molecular signatures for each traditional tomato type and indicated that signatures originated from differential combinations of loci, which in some cases converged in the same tomato phenotype. Our results provide a roadmap for studying and exploiting this untapped tomato diversity.

Identification and characterization of GLOBE, a major gene controlling fruit shape and impacting fruit size and marketability in tomato

Within large-fruited germplasm, fruit size is influenced by flat and globe shapes. Whereas flat fruits are smaller and retain better marketability, globe fruits are larger and more prone to cuticle disorders. Commercial hybrids are often developed from crosses between flat and globe shaped parents because flat shape is thought to be dominant and fruit size intermediate. The objectives of this study were to determine the genetic basis of flat/globe fruit shape in large-fruited fresh-market tomato germplasm and to characterize its effects on several fruit traits. Twenty-three advanced single plant selections from the Fla. 8000 × Fla. 8111B cross were selectively genotyped using a genome-wide SNP array, and inclusive composite interval mapping identified a single locus on the upper arm of chromosome 12 associated with shape, which we termed globe. A 238-plant F₂ population and 69 recombinant inbred lines for this region from the same parents delimited globe to approximately 392-kilobases. A germplasm survey representing materials from multiple breeding programs demonstrated that the locus explains the flat/globe shape broadly. A single base insertion in an exon of Solyc12g006860, a gene annotated as a brassinosteroid hydroxylase, segregated completely with shape in all populations tested. CRISPR/Cas9 knock out plants confirmed this gene as underlying the globe locus. In silico analysis of the mutant allele of GLOBE among 595 wild and domesticated accessions suggested that the allele arose very late in the domestication process. Fruit measurements in three genetic backgrounds evidenced that globe impacts fruit size and several fruit shape attributes, pedicel length/width, and susceptibility of fruit to weather check. The mutant allele of GLOBE appears mostly recessive for all traits except fruit size where it acts additively.

Evolution of Lineage-Specific Gene Networks Underlying the Considerable Fruit Shape Diversity in Persimmon

The shapes of plant organs reflect the evolution of each lineage and have been diversified according to lineage-specific adaptations to environment. Research on the molecular pathways responsible for organ shapes has traditionally been focused mainly on leaves or flowers. Thus, little is known about the pathways controlling fruit shapes, despite their diversity in some plant species. In this study, we analyzed oriental persimmon (Diospyros kaki), which exhibits considerable diversity in fruit shapes among cultivars, to elucidate the underlying molecular mechanism using transcriptomic data and quantitative evaluation. First, to filter the candidate genes associated with persimmon fruit shapes, the whole gene expression patterns obtained using mRNA-Seq analysis from 100 individuals, including a segregated population and various cultivars, were assessed to detect correlations with principal component scores for fruit shapes characterized with elliptic Fourier descriptors. Next, a gene co-expression network analysis with weighted gene co-expression network analysis (WGCNA) package revealed that class 1 KNOX family genes and SEEDSTICK function as integrators along with some phytohormone-related genes, to regulate the fruit shape diversity. On the other hand, the OVATE family genes also contribute to fruit shape diversity, of which pathway would be potentially shared with other plant species. Evolutionary aspects suggest that acquisition of a high lineage-specific and variable expression of class 1 KNOX gene, knotted-like homeobox of Arabidopsis thaliana 1 (KNAT1), in young fruit is important for establishing the persimmon-specific mechanism that determines fruit shape diversity.

Comparative analysis of repetitive sequences among species from the potato and the tomato clades

BACKGROUND AND AIMS

The genus Solanum includes important vegetable crops and their wild relatives. Introgression of their useful traits into elite cultivars requires effective recombination between hom(e)ologues, which is partially determined by genome sequence differentiation. In this study we compared the repetitive genome fractions of wild and cultivated species of the potato and tomato clades in a phylogenetic context.

METHODS

Genome skimming followed by a clustering approach was used as implemented in the RepeatExplorer pipeline. Repeat classes were annotated and the sequences of their main domains were compared.

KEY RESULTS

Repeat abundance and genome size were correlated and the larger genomes of species in the tomato clade were found to contain a higher proportion of unclassified elements. Families and lineages of repetitive elements were largely conserved between the clades, but their relative proportions differed. The most abundant repeats were Ty3/Gypsy elements. Striking differences in abundance were found in the highly dynamic Ty3/Gypsy Chromoviruses and Ty1/Copia Tork elements. Within the potato clade, early branching Solanum cardiophyllum showed a divergent repeat profile. There were also contrasts between cultivated and wild potatoes, mostly due to satellite amplification in the cultivated species. Interspersed repeat profiles were very similar among potatoes. The repeat profile of Solanum etuberosum was more similar to that of the potato clade.

CONCLUSIONS

The repeat profiles in Solanum seem to be very similar despite genome differentiation at the level of collinearity. Removal of transposable elements by unequal recombination may have been responsible for structural rearrangements across the tomato clade. Sequence variability in the tomato clade is congruent with clade-specific amplification of repeats after its divergence from S. etuberosum and potatoes. The low differentiation among potato and its wild relatives at the level of interspersed repeats may explain the difficulty in discriminating their genomes by genomic in situ hybridization techniques.

Targeted gene disruption coupled with metabolic screen approach to uncover the LEAFY COTYLEDON1-LIKE4 (L1L4) function in tomato fruit metabolism

Functional analysis of tomato L1L4 master transcription factor resulted in important metabolic changes affecting tomato fruit quality. Tomato fruits from mutant lines bearing targeted disruption of the heterotrimeric nuclear transcription factor Y (NF-Y) transcription factor (TF) gene LEAFY-COTYLEDON1-LIKE4 (L1L4, NF-YB6), a master regulator of biosynthesis for seed storage proteins and fatty acids, were evaluated for metabolites content and morphology. Metabolic screens using LC-MS/MS-based analysis and physico-chemical methods in different L1L4 mutants of the fourth generation allowed a comparative assessment of the effects of the TF disruption. Mutagenesis resulted in fruits phenotypically similar to wild-type with subtle shape differences in the distal end protrusion and symmetry. Conversely, mutant fruits from independent lines had significant variation in moisture content, titratable acidity and overall metabolite profiles including oxalic and citric acid, fructose, β-carotene, total polyphenols and antioxidants. Lines 6, 7 and 9 were the richest in β-carotene and antioxidant activity, line 4 in ascorbic acid and lines 4 and 8 in succinic acid. The reduced content of the anti-nutrient oxalic acid in several mutant fruits suggests that L1L4 gene may regulate the accumulation of this compound during fruit development. Detailed LC-MS/MS analysis of mutant seeds showed substantial differences in bioactive compounds compared to wild-type seeds. Taken together, the results suggest that the L1L4 TF is a significant regulator of metabolites both in tomato fruit and seeds providing a molecular target for crop improvement. Elucidation of the candidate genes encoding key enzymes in the affected metabolic pathways aimed to facilitate the L1L4 gene network exploration and eventually lead to systems biology approaches in tomato fruit quality.

Identification of Two New Mechanisms That Regulate Fruit Growth by Cell Expansion in Tomato

Key mechanisms controlling fruit weight and shape at the levels of meristem, ovary or very young fruit have already been identified using natural tomato diversity. We reasoned that new developmental modules prominent at later stages of fruit growth could be discovered by using new genetic and phenotypic diversity generated by saturated mutagenesis. Twelve fruit weight and tissue morphology mutants likely affected in late fruit growth were selected among thousands of fruit size and shape EMS mutants available in our tomato EMS mutant collection. Their thorough characterization at organ, tissue and cellular levels revealed two major clusters controlling fruit growth and tissue morphogenesis either through (i) the growth of all fruit tissues through isotropic cell expansion or (ii) only the growth of the pericarp through anisotropic cell expansion. These likely correspond to new cell expansion modules controlling fruit growth and tissue morphogenesis in tomato. Our study therefore opens the way for the identification of new gene regulatory networks controlling tomato fruit growth and morphology.

Collinearity between potato (Solanum tuberosum L.) and wild relatives assessed by comparative cytogenetic mapping

A major bottleneck to introgressive hybridization is the lack of genome collinearity between the donor (alien) genome and the recipient crop genome. Structural differences between the homeologs may create unbalanced segregation of chromosomes or cause linkage drag. To assess large-scale collinearity between potato and two of its wild relatives (Solanum commersonii and Solanum chacoense), we used BAC-FISH mapping of sequences with known positions on the RH potato map. BAC probes could successfully be hybridized to the S. commersonii and S. chachoense pachytene chromosomes, confirming their correspondence with linkage groups in RH potato. Our study shows that the order of BAC signals is conserved. Distances between BAC signals were quantified and compared; some differences found suggest either small-scale rearrangements or reduction/amplification of repeats. We conclude that S. commersonii and S. chacoense are collinear with cultivated Solanum tuberosum on the whole chromosome scale, making these amenable species for efficient introgressive hybridization breeding.

Moving through the Stressed Genome: Emerging Regulatory Roles for Transposons in Plant Stress Response

The recognition of a positive correlation between organism genome size with its transposable element (TE) content, represents a key discovery of the field of genome biology. Considerable evidence accumulated since then suggests the involvement of TEs in genome structure, evolution and function. The global genome reorganization brought about by transposon activity might play an adaptive/regulatory role in the host response to environmental challenges, reminiscent of McClintock's original 'Controlling Element' hypothesis. This regulatory aspect of TEs is also garnering support in light of the recent evidences, which project TEs as "distributed genomic control modules." According to this view, TEs are capable of actively reprogramming host genes circuits and ultimately fine-tuning the host response to specific environmental stimuli. Moreover, the stress-induced changes in epigenetic status of TE activity may allow TEs to propagate their stress responsive elements to host genes; the resulting genome fluidity can permit phenotypic plasticity and adaptation to stress. Given their predominating presence in the plant genomes, nested organization in the genic regions and potential regulatory role in stress response, TEs hold unexplored potential for crop improvement programs. This review intends to present the current information about the roles played by TEs in plant genome organization, evolution, and function and highlight the regulatory mechanisms in plant stress responses. We will also briefly discuss the connection between TE activity, host epigenetic response and phenotypic plasticity as a critical link for traversing the translational bridge from a purely basic study of TEs, to the applied field of stress adaptation and crop improvement.

Development of a high-resolution melting marker for selecting Fusarium crown and root rot resistance in tomato

Fusarium crown and root rot is a severe fungal disease of tomato caused by Fusarium oxysporum f. sp. radicis-lycopersici (FORL). In this study, the genomic location of the FORL-resistance locus was determined using a set of molecular markers on chromosome 9 and an F2 population derived from FORL-resistant inbred ‘AV107-4’ (Solanum lycopersicum) × susceptible ‘L3708’ (Solanum pimpinellifolium). Bioassay performed using Korean FORL strain KACC 40031 showed single dominant inheritance of FORL resistance in the F2 population. In all, 13 polymerase chain reaction-based markers encompassing approximately 3.6–72.0 Mb of chromosome 9 were developed based on the Tomato-EXPEN 2000 map and SolCAP Tomato single nucleotide polymorphism array analysis. These markers were genotyped on 345 F2 plants, and the FORL-resistance locus was found to be present on a pericentromeric region of suppressed chromosomal recombination in chromosome 9. The location of the FORL-resistance locus was further confirmed by testing these markers against diverse commercial tomato and stock cultivars resistant to FORL. A restriction fragment length polymorphism marker, PNU-D4, located at approximately 6.1 Mb of chromosome 9 showed the highest match with the resistance locus and was used for conducting high-resolution melting analysis for marker-assisted selection of FORL resistance.

The effect of transposable elements on phenotypic variation: insights from plants to humans

Transposable elements (TEs), originally discovered in maize as controlling elements, are the main components of most eukaryotic genomes. TEs have been regarded as deleterious genomic parasites due to their ability to undergo massive amplification. However, TEs can regulate gene expression and alter phenotypes. Also, emerging findings demonstrate that TEs can establish and rewire gene regulatory networks by genetic and epigenetic mechanisms. In this review, we summarize the key roles of TEs in fine-tuning the regulation of gene expression leading to phenotypic plasticity in plants and humans, and the implications for adaption and natural selection.

Detection of an inversion in the Ty-2 region between S. lycopersicum and S. habrochaites by a combination of de novo genome assembly and BAC cloning

A chromosomal inversion associated with the tomato Ty - 2 gene for TYLCV resistance is the cause of severe suppression of recombination in a tomato Ty - 2 introgression line. Among tomato and its wild relatives inversions are often observed, which result in suppression of recombination. Such inversions hamper the transfer of important traits from a related species to the crop by introgression breeding. Suppression of recombination was reported for the TYLCV resistance gene, Ty-2, which has been introgressed in cultivated tomato (Solanum lycopersicum) from the wild relative S. habrochaites accession B6013. Ty-2 was mapped to a 300-kb region on the long arm of chromosome 11. The suppression of recombination in the Ty-2 region could be caused by chromosomal rearrangements in S. habrochaites compared with S. lycopersicum. With the aim of visualizing the genome structure of the Ty-2 region, we compared the draft de novo assembly of S. habrochaites accession LYC4 with the sequence of cultivated tomato ('Heinz'). Furthermore, using populations derived from intraspecific crosses of S. habrochaites accessions, the order of markers in the Ty-2 region was studied. Results showed the presence of an inversion of approximately 200 kb in the Ty-2 region when comparing S. lycopersicum and S. habrochaites. By sequencing a BAC clone from the Ty-2 introgression line, one inversion breakpoint was identified. Finally, the obtained results are discussed with respect to introgression breeding and the importance of a priori de novo sequencing of the species involved.

Mendelizing all Components of a Pyramid of Three Yield QTL in Tomato

Molecular markers allowed breeders to mendelize quantitative trait loci (QTL) providing another demonstration that quantitative traits are governed by the same principles as single qualitative genes. This research extends the QTL analysis to two and three QTL and tests our ability to mendelize an oligogenic trait. In tomato, agricultural yield is determined by the weight of the fruits harvested per unit area and the total soluble solids (% Brix)-sugars and acids. The current study explores the segregation of multiple independent yield-related QTL that were identified and mapped using introgression lines (IL) of Solanum pennellii in cultivated processing tomato (S. lycopersicum). We screened 45 different double and triple IL-QTL combinations for agricultural yield, to identify QTL pyramids that behaved in an additive manner and were suitable substrate for mendelizing an oligogenic trait. A pyramid of three independent QTL that significantly improved Brix(∗)Yield (BXY - the soluble solids output per unit area) compared to M82 was selected. In the progenies of the tri-hybrid we bred using markers a nearly isogenic 'immortalized F2.' While the common mode of QTL-QTL interactions across the 45 IL-QTLs combinations was less than additive, the three QTLs in the selected triple-stack performed in an additive manner which made it an exceptional material for breeding. This study demonstrates that using the phenotypic effect of all 27 possible QTL-alleles combinations it is possible to make reliable predictions about the genotypes that will maximize the yield.

Functional analysis of tomato calmodulin gene family during fruit development and ripening

Calmodulin is a ubiquitous calcium sensor to recognize the different developmental and/or stimulus-triggered calcium changes and regulate plant growth and development. However, the function of calmodulin remains elusive for fleshy fruit development. We performed expression studies of a family of six calmodulin genes (SlCaMs) in tomato fruit. All calmodulins showed a double peak expression pattern. The first flat peak appeared at 10-30 days after anthesis, but their expression rapidly declined at mature green and breaker. Then a sharp and even higher peak came at turning/pink stages. Among six calmodulins, SlCaM1 had the highest expression during fruit enlargement, whereas SlCaM2 was the major calmodulin during fruit ripening. However, SlCaMs showed different patterns in three ripening mutants rin, Nor and Nr. In particular, at the stages corresponding to mature green and breaker, the expression levels of SlCaMs in those mutants were significantly higher than wild-type. Furthermore, SlCaMs, especially SlCaM2 were upregulated by ethylene. Transiently overexpressing SlCaM2 in mature green fruit delayed ripening, while reducing SlCaM2 expression accelerated ripening. Our results suggest that SlCaMs play double roles to regulate fruit ripening. Prior to the ethylene burst, the ethylene-independent repression of SlCaMs might be critical for fruit to initiate the ripening process. After the ethylene burst, SlCaMs could participate in the ethylene coordinated rapid ripening.

What lies beyond the eye: the molecular mechanisms regulating tomato fruit weight and shape

Domestication of fruit and vegetables resulted in a huge diversity of shapes and sizes of the produce. Selections that took place over thousands of years of alleles that increased fruit weight and altered shape for specific culinary uses provide a wealth of resources to study the molecular bases of this diversity. Tomato (Solanum lycopersicum) evolved from a wild ancestor (S. pimpinellifolium) bearing small and round edible fruit. Molecular genetic studies led to the identification of two genes selected for fruit weight: FW2.2 encoding a member of the Cell Number Regulator family; and FW3.2 encoding a P450 enzyme and the ortholog of KLUH. Four genes were identified that were selected for fruit shape: SUN encoding a member of the IQD family of calmodulin-binding proteins leading to fruit elongation; OVATE encoding a member of the OVATE family proteins involved in transcriptional repression leading to fruit elongation; LC encoding most likely the ortholog of WUSCHEL controlling meristem size and locule number; FAS encoding a member in the YABBY family controlling locule number leading to flat or oxheart shape. For this article, we will provide an overview of the putative function of the known genes, when during floral and fruit development they are hypothesized to act and their potential importance in regulating morphological diversity in other fruit and vegetable crops.

Mapping pachytene chromosomes of coffee using a modified protocol for fluorescence in situ hybridization

Fluorescence in situ hybridization (FISH) is the most direct method for physically mapping DNA sequences on chromosomes. Fluorescence in situ hybridization mapping of meiotic chromosomes during the pachytene stage is an important tool in plant cytogenetics, because it provides high-resolution measurements of physical distances. Fluorescence in situ hybridization mapping of coffee pachytene chromosomes offers significant advantages compared with FISH mapping of somatic chromosomes, because pachytene chromosomes are 30 times longer and provide additional cytological markers. However, the application of this technique to pachytene chromosomes has been complicated by problems in making preparations of meiotic chromosomes and by difficulties in the application of standard FISH protocols. We have been able to overcome most of these obstacles in applying the FISH technique to the pachytene chromosomes of coffee plants. Digesting the external callose layer surrounding the pollen mother cells (PMCs) in conjunction with other procedures permitted suitable pachytene chromosomes to be obtained by increasing cell permeability, which allowed the probe sequences to enter the cells. For the first time, hybridization signals were registered on coffee pachytene chromosomes using the FISH technique with a repetitive sequence as a probe. We obtained slides on which 80 % of the PMCs had hybridization signals, resulting in FISH labelling with high efficiency. The procedure does not seem to be dependent on the genotype, because hybridization signals were detected in genetically different coffee plants. These findings enhance the possibilities for high-resolution physical mapping of coffee chromosomes.

How important are transposons for plant evolution?

For decades, transposable elements have been known to produce a wide variety of changes in plant gene expression and function. This has led to the idea that transposable element activity has played a key part in adaptive plant evolution. This Review describes the kinds of changes that transposable elements can cause, discusses evidence that those changes have contributed to plant evolution and suggests future strategies for determining the extent to which these changes have in fact contributed to plant adaptation and evolution. Recent advances in genomics and phenomics for a range of plant species, particularly crops, have begun to allow the systematic assessment of these questions.

Development of a large SNP genotyping array and generation of high-density genetic maps in tomato

The concurrent development of high-throughput genotyping platforms and next generation sequencing (NGS) has increased the number and density of genetic markers, the efficiency of constructing detailed linkage maps, and our ability to overlay recombination and physical maps of the genome. We developed an array for tomato with 8,784 Single Nucleotide Polymorphisms (SNPs) mainly discovered based on NGS-derived transcriptome sequences. Of the SNPs, 7,720 (88%) passed manufacturing quality control and could be scored in tomato germplasm. The array was used to generate high-density linkage maps for three interspecific F(2) populations: EXPEN 2000 (Solanum lycopersicum LA0925 x S. pennellii LA0716, 79 individuals), EXPEN 2012 (S. lycopersicum Moneymaker x S. pennellii LA0716, 160 individuals), and EXPIM 2012 (S. lycopersicum Moneymaker x S. pimpinellifolium LA0121, 183 individuals). The EXPEN 2000-SNP and EXPEN 2012 maps consisted of 3,503 and 3,687 markers representing 1,076 and 1,229 unique map positions (genetic bins), respectively. The EXPEN 2000-SNP map had an average marker bin interval of 1.6 cM, while the EXPEN 2012 map had an average bin interval of 0.9 cM. The EXPIM 2012 map was constructed with 4,491 markers (1,358 bins) and an average bin interval of 0.8 cM. All three linkage maps revealed an uneven distribution of markers across the genome. The dense EXPEN 2012 and EXPIM 2012 maps showed high levels of colinearity across all 12 chromosomes, and also revealed evidence of small inversions between LA0716 and LA0121. Physical positions of 7,666 SNPs were identified relative to the tomato genome sequence. The genetic and physical positions were mostly consistent. Exceptions were observed for chromosomes 3, 10 and 12. Comparing genetic positions relative to physical positions revealed that genomic regions with high recombination rates were consistent with the known distribution of euchromatin across the 12 chromosomes, while very low recombination rates were observed in the heterochromatic regions.

Chromosomal rearrangements between tomato and Solanum chilense hamper mapping and breeding of the TYLCV resistance gene Ty-1

Tomato yellow leaf curl disease, a devastating disease of Solanum lycopersicum (tomato), is caused by a complex of begomoviruses generally referred to as Tomato yellow leaf curl virus (TYLCV). Almost all breeding for TYLCV resistance has been based on the introgression of the Ty-1 resistance locus derived from Solanum chilense LA1969. Knowledge about the exact location of Ty-1 on tomato chromosome 6 will help in understanding the genomic organization of the Ty-1 locus. In this study, we analyze the chromosomal rearrangement and recombination behavior of the chromosomal region where Ty-1 is introgressed. Nineteen markers on tomato chromosome 6 were used in F(2) populations obtained from two commercial hybrids, and showed the presence of a large introgression in both. Fluorescence in situ hybridization (FISH) analysis revealed two chromosomal rearrangements between S. lycopersicum and S. chilense LA1969 in the Ty-1 introgression. Furthermore, a large-scale recombinant screening in the two F(2) populations was performed, and 30 recombinants in the Ty-1 introgression were identified. All recombination events were located on the long arm beyond the inversions, showing that recombination in the inverted region was absent. Disease tests on progenies of informative recombinants with TYLCV mapped Ty-1 to the long arm between markers MSc05732-4 and MSc05732-14, an interval overlapping with the reported Ty-3 region, which led to the indication that Ty-1 and Ty-3 may be allelic. With this study we prove that FISH can be used as a diagnostic tool to aid in the accurate mapping of genes that were introgressed from wild species into cultivated tomato.

Characterization of fs10.1, a major QTL controlling fruit elongation in Capsicum

We previously identified fs10.1 as a major QTL controlling fruit shape (index of length to width) in an interspecific F(2) cross of Capsicum annuum (round fruit) × C. chinense (elongated fruit) in pepper. To more precisely map and characterize the QTL, we constructed near-isogenic lines for fs10.1 and mapped it in a BC(4)F(2) population. In this population, fs10.1 segregated as a Mendelian locus and mapped 0.3 cM away from the closest molecular marker. We further verified the effect of fs10.1 in an F(2) population from an independent cross between elongated- and conical-fruited parents. To identify additional allelic variation at fruit shape loci, we screened an EMS-mutagenized population of the blocky-fruited cv. Maor and identified the mutant E-1654 with elongated fruit. This fruit shape mutation was mapped to the fs10.1 region and was determined to be allelic to the QTL. By measuring fruit shape of near-isogenic lines for fs10.1 during fruit development, we found that the shape of the fruit is determined primarily in the first 2 weeks after anthesis. Histological measurements of cell size and cell shape in pericarp sections of fruits of the isogenic lines throughout fruit development indicated that the shape of the fruit is determined primarily by cell shape and that the development of fruit shape is correlated with cell shape.

Genome organization of the tomato sun locus and characterization of the unusual retrotransposon Rider

DNA sequences provide useful insights into genome structure and organization as well as evolution of species. We report on a detailed analysis of the locus surrounding the tomato (Solanum lycopersicum) fruit-shape gene SUN to determine the driving force and genome environment that foster the appearance of novel phenotypes. The gene density at the sun locus is similar to that described in other euchromatic portions of the tomato genome despite the relatively high number of transposable elements. Genes at the sun locus include protein-coding as well as RNA genes, are small in size, and belong to families that were duplicated at the locus an estimated 5-74 million years ago. In general, the DNA transposons at the sun locus are older than the RNA transposons, and their insertion pre-dates the speciation of S. lycopersicum and S. pimpinellifolium. Gene redundancy and large intergenic regions may explain the tolerance of the sun locus to frequent rearrangements and transpositions. The most recent transposition event at the sun locus involved Rider, a recently discovered high-copy retrotransposon. Rider probably arose early during the speciation of tomato. The element inserts into or near to genes and may still be active, which are unusual features for a high-copy element. Rider full-length and read-through transcripts past the typical transcription termination stop are detected, and the latter are required for mobilizing nearby sequences. Rider activity has resulted in an altered phenotype in three known cases, and may therefore have played an important role in tomato evolution and domestication.

Genome analysis and genetic enhancement of tomato

The Solanaceae is an important family of vegetable crops, ornamentals and medicinal plants. Tomato has served as a model member of this family largely because of its enriched cytogenetic, genetic, as well as physical, maps. Mapping has helped in cloning several genes of importance such as Pto, responsible for resistance against bacterial speck disease, Mi-1.2 for resistance against nematodes, and fw2.2 QTL for fruit weight. A high-throughput genome-sequencing program has been initiated by an international consortium of 10 countries. Since heterochromatin has been found to be concentrated near centromeres, the consortium is focusing on sequencing only the gene-rich euchromatic region. Genomes of the members of Solanaceae show a significant degree of synteny, suggesting that the tomato genome sequence would help in the cloning of genes for important traits from other Solanaceae members as well. ESTs from a large number of cDNA libraries have been sequenced, and microarray chips, in conjunction with wide array of ripening mutants, have contributed immensely to the understanding of the fruit-ripening phenomenon. Work on the analysis of the tomato proteome has also been initiated. Transgenic tomato plants with improved abiotic stress tolerance, disease resistance and insect resistance, have been developed. Attempts have also been made to develop tomato as a bioreactor for various pharmaceutical proteins. However, control of fruit quality and ripening remains an active and challenging area of research. Such efforts should pave the way to improve not only tomato, but also other solanaceous crops.

Integration of tomato reproductive developmental landmarks and expression profiles, and the effect of SUN on fruit shape

BACKGROUND

Universally accepted landmark stages are necessary to highlight key events in plant reproductive development and to facilitate comparisons among species. Domestication and selection of tomato resulted in many varieties that differ in fruit shape and size. This diversity is useful to unravel underlying molecular and developmental mechanisms that control organ morphology and patterning. The tomato fruit shape gene SUN controls fruit elongation. The most dramatic effect of SUN on fruit shape occurs after pollination and fertilization although a detailed investigation into the timing of the fruit shape change as well as gene expression profiles during critical developmental stages has not been conducted.

RESULTS

We provide a description of floral and fruit development in a red-fruited closely related wild relative of tomato, Solanum pimpinellifolium accession LA1589. We use established and propose new floral and fruit landmarks to present a framework for tomato developmental studies. In addition, gene expression profiles of three key stages in floral and fruit development are presented, namely floral buds 10 days before anthesis (floral landmark 7), anthesis-stage flowers (floral landmark 10 and fruit landmark 1), and 5 days post anthesis fruit (fruit landmark 3). To demonstrate the utility of the landmarks, we characterize the tomato shape gene SUN in fruit development. SUN controls fruit shape predominantly after fertilization and its effect reaches a maximum at 8 days post-anthesis coinciding with fruit landmark 4 representing the globular embryo stage of seed development. The expression profiles of the NILs that differ at sun show that only 34 genes were differentially expressed and most of them at a less than 2-fold difference.

CONCLUSION

The landmarks for flower and fruit development in tomato were outlined and integrated with the effect of SUN on fruit shape. Although we did not identify many genes differentially expressed in the NILs that differ at the sun locus, higher or lower transcript levels for many genes involved in phytohormone biosynthesis or signaling as well as organ identity and patterning of tomato fruit were found between developmental time points.

Comparative genetic linkage map of Solanum sect. Juglandifolia: evidence of chromosomal rearrangements and overall synteny with the tomatoes and related nightshades

The two nightshades Solanum ochranthum and S. juglandifolium show genetic and morphological similarities to the tomatoes (Solanum sect. Lycopersicon), but are isolated from them by strong reproductive barriers. Their genetic relationships to tomato and other Solanum species were investigated using comparative genetic linkage maps obtained from an interspecific F(2) S. ochranthum x S. juglandifolium population. Sixty-six plants were screened using a total of 132 markers--CAPs, RFLPs and SSRs--previously mapped in tomato. Twelve linkage groups were identified, generally corresponding to the expected (syntenic) tomato chromosomes, with two exceptions. Chromosome 1 was composed of two linkage groups and chromosomes 8 and 12 were connected in one large linkage group, indicating a likely reciprocal translocation differentiating the two parental genomes. The total map length comprised 790 cM, representing a 42% reduction in recombination rate relative to the tomato reference map. Transmission ratio distortion affected one-third of the genome, with 13 putative TRD loci identified on 9 out of 12 chromosomes. Most regions were collinear with the tomato reference maps, including the long arm of chromosome 10, which is inverted relative to two other tomato-like nightshades, S. lycopersicoides and S. sitiens. The results support the status of S. ochranthum and S. juglandifolium as the nearest outgroup to the tomatoes and imply they are more closely related to cultivated tomato than predicted from crossing relationships, thus encouraging further attempts at hybridization and introgression between them.

High resolution genetic and physical mapping of the I-3 region of tomato chromosome 7 reveals almost continuous microsynteny with grape chromosome 12 but interspersed microsynteny with duplications on Arabidopsis chromosomes 1, 2 and 3

The tomato I-3 gene introgressed from the Lycopersicon pennellii accession LA716 confers resistance to race 3 of the fusarium wilt pathogen Fusarium oxysporum f. sp. lycopersici. We have improved the high-resolution map of the I-3 region of tomato chromosome 7 with the development and mapping of 31 new PCR-based markers. Recombinants recovered from L. esculentum cv. M82 x IL7-2 F2 and (IL7-2 x IL7-4) x M82 TC1F2 mapping populations, together with recombinants recovered from a previous M82 x IL7-3 F2 mapping population, were used to position these markers. A significantly higher recombination frequency was observed in the (IL7-2 x IL7-4) x M82 TC1F2 mapping population based on a reconstituted L. pennellii chromosome 7 compared to the other two mapping populations based on smaller segments of L. pennellii chromosome 7. A BAC contig consisting of L. esculentum cv. Heinz 1706 BACs covering the I-3 region has also been established. The new high-resolution map places the I-3 gene within a 0.38 cM interval between the molecular markers RGA332 and bP23/gPT with an estimated physical size of 50-60 kb. The I-3 region was found to display almost continuous microsynteny with grape chromosome 12 but interspersed microsynteny with Arabidopsis thaliana chromosomes 1, 2 and 3. An S-receptor-like kinase gene family present in the I-3 region of tomato chromosome 7 was found to be present in the microsyntenous region of grape chromosome 12 but was absent altogether from the A. thaliana genome.

Selecting a set of wild barley introgression lines and verification of QTL effects for resistance to powdery mildew and leaf rust

A set of 59 spring barley introgression lines (ILs) was developed from the advanced backcross population S42. The ILs were generated by three rounds of backcrossing, two to four subsequent selfings, and, in parallel, marker-assisted selection. Each line includes a single marker-defined chromosomal segment of the wild barley accession ISR42-8 (Hordeum vulgare ssp. spontaneum), whereas the remaining part of the genome is derived from the elite barley cultivar Scarlett (H. vulgare ssp. vulgare). Based on a map containing 98 SSR markers, the IL set covers so far 86.6% (1041.5 cM) of the donor genome. Each single line contains an average exotic introgression of 39.2 cM, representing 3.2% of the exotic genome. The utility of the developed IL set is illustrated by verification of QTLs controlling resistance to powdery mildew (Blumeria graminis f. sp. hordei L.) and leaf rust (Puccinia hordei L.) which were previously identified in the advanced backcross population S42. Altogether 57.1 and 75.0% of QTLs conferring resistance to powdery mildew and leaf rust, respectively, were verified by ILs. The strongest favorable effects were mapped to regions 1H, 0-85 cM and 4H, 125-170 cM, where susceptibility to powdery mildew and leaf rust was decreased by 66.1 and 34.7%, respectively, compared to the recurrent parent. In addition, three and one new QTLs were localized, respectively. A co-localization of two favorable QTLs was identified for line S42IL-138, which holds an introgressed segment in region 7H, 166-181. Here, a reduction effect was revealed for powdery mildew as well as for leaf rust severity. This line might be a valuable resource for transferring new resistance alleles into elite cultivars. In future, we aim to cover the complete exotic genome by selecting additional ILs. We intend to conduct further phenotype studies with the IL set in regard to the trait complexes agronomic performance, malting quality, biotic stress, and abiotic stress.

Selecting a set of wild barley introgression lines and verification of QTL effects for resistance to powdery mildew and leaf rust

A set of 59 spring barley introgression lines (ILs) was developed from the advanced backcross population S42. The ILs were generated by three rounds of backcrossing, two to four subsequent selfings, and, in parallel, marker-assisted selection. Each line includes a single marker-defined chromosomal segment of the wild barley accession ISR42-8 (Hordeum vulgare ssp. spontaneum), whereas the remaining part of the genome is derived from the elite barley cultivar Scarlett (H. vulgare ssp. vulgare). Based on a map containing 98 SSR markers, the IL set covers so far 86.6% (1041.5 cM) of the donor genome. Each single line contains an average exotic introgression of 39.2 cM, representing 3.2% of the exotic genome. The utility of the developed IL set is illustrated by verification of QTLs controlling resistance to powdery mildew (Blumeria graminis f. sp. hordei L.) and leaf rust (Puccinia hordei L.) which were previously identified in the advanced backcross population S42. Altogether 57.1 and 75.0% of QTLs conferring resistance to powdery mildew and leaf rust, respectively, were verified by ILs. The strongest favorable effects were mapped to regions 1H, 0-85 cM and 4H, 125-170 cM, where susceptibility to powdery mildew and leaf rust was decreased by 66.1 and 34.7%, respectively, compared to the recurrent parent. In addition, three and one new QTLs were localized, respectively. A co-localization of two favorable QTLs was identified for line S42IL-138, which holds an introgressed segment in region 7H, 166-181. Here, a reduction effect was revealed for powdery mildew as well as for leaf rust severity. This line might be a valuable resource for transferring new resistance alleles into elite cultivars. In future, we aim to cover the complete exotic genome by selecting additional ILs. We intend to conduct further phenotype studies with the IL set in regard to the trait complexes agronomic performance, malting quality, biotic stress, and abiotic stress.

Cross-species bacterial artificial chromosome-fluorescence in situ hybridization painting of the tomato and potato chromosome 6 reveals undescribed chromosomal rearrangements

Ongoing genomics projects of tomato (Solanum lycopersicum) and potato (S. tuberosum) are providing unique tools for comparative mapping studies in Solanaceae. At the chromosomal level, bacterial artificial chromosomes (BACs) can be positioned on pachytene complements by fluorescence in situ hybridization (FISH) on homeologous chromosomes of related species. Here we present results of such a cross-species multicolor cytogenetic mapping of tomato BACs on potato chromosomes 6 and vice versa. The experiments were performed under low hybridization stringency, while blocking with Cot-100 was essential in suppressing excessive hybridization of repeat signals in both within-species FISH and cross-species FISH of tomato BACs. In the short arm we detected a large paracentric inversion that covers the whole euchromatin part with breakpoints close to the telomeric heterochromatin and at the border of the short arm pericentromere. The long arm BACs revealed no deviation in the colinearity between tomato and potato. Further comparison between tomato cultivars Cherry VFNT and Heinz 1706 revealed colinearity of the tested tomato BACs, whereas one of the six potato clones (RH98-856-18) showed minor putative rearrangements within the inversion. Our results present cross-species multicolor BAC-FISH as a unique tool for comparative genetic studies across Solanum species.

Integration of cytogenetic and genetic linkage maps unveils the physical architecture of tomato chromosome 2

We report the integration of the linkage map of tomato chromosome 2 with a high-density bacterial artificial chromosome fluorescence in situ hybridization (BAC-FISH)-based cytogenetic map. The euchromatic block of chromosome 2 resides between 13 and 142 cM and has a physical length of 48.12 microm, with 1 microm equivalent to 540 kb. BAC-FISH resolved a pair of loci that were 3.7-3.9 Mb apart and were not resolved on the linkage map. Most of the regions had crossover densities close to the mean of approximately 200 kb/cM. Relatively hot and cold spots of recombination were unevenly distributed along the chromosome. The distribution of centimorgan/micrometer values was similar to the previously reported recombination nodule distribution along the pachytene chromosome. FISH-based physical maps will play an important role in advanced genomics research for tomato, including map-based cloning of agronomically important traits and whole-genome sequencing.

Comparative genetics of hybrid incompatibility: sterility in two Solanum species crosses

The genetic basis of hybrid sterility can provide insight into the genetic and evolutionary origins of species barriers. We examine the genetics of hybrid incompatibility between two diploid plant species in the plant clade Solanum sect. Lycopersicon. Using a set of near-isogenic lines (NILs) representing the wild species Solanum pennellii (formerly Lycopersicon pennellii) in the genetic background of the cultivated tomato S. lycopersicum (formerly L. esculentum), we found that hybrid pollen and seed infertility are each based on a modest number of loci, male (pollen) and other (seed) incompatibility factors are roughly comparable in number, and seed-infertility QTL act additively or recessively. These findings are remarkably consistent with our previous analysis in a different species pair, S. lycopersicum x S. habrochaites. Data from both studies contrast strongly with data from Drosophila. Finally, QTL for pollen and seed sterility from the two Solanum studies were chromosomally colocalized, indicating a shared evolutionary history for these QTL, a nonrandom genomic distribution of loci causing sterility, and/or a proclivity of certain genes to be involved in hybrid sterility. We show that comparative mapping data can delimit the probable timing of evolution of detected QTL and discern which sterility loci likely evolved earliest among species.

A retrotransposon-mediated gene duplication underlies morphological variation of tomato fruit

Edible fruits, such as that of the tomato plant and other vegetable crops, are markedly diverse in shape and size. SUN, one of the major genes controlling the elongated fruit shape of tomato, was positionally cloned and found to encode a member of the IQ67 domain-containing family. We show that the locus arose as a result of an unusual 24.7-kilobase gene duplication event mediated by the long terminal repeat retrotransposon Rider. This event resulted in a new genomic context that increased SUN expression relative to that of the ancestral copy, culminating in an elongated fruit shape. Our discovery demonstrates that retrotransposons may be a major driving force in genome evolution and gene duplication, resulting in phenotypic change in plants.

Mode of inheritance of primary metabolic traits in tomato

To evaluate components of fruit metabolic composition, we have previously metabolically phenotyped tomato (Solanum lycopersicum) introgression lines containing segmental substitutions of wild species chromosome in the genetic background of a cultivated variety. Here, we studied the hereditability of the fruit metabolome by analyzing an additional year's harvest and evaluating the metabolite profiles of lines heterozygous for the introgression (ILHs), allowing the evaluation of putative quantitative trait locus (QTL) mode of inheritance. These studies revealed that most of the metabolic QTL (174 of 332) were dominantly inherited, with relatively high proportions of additively (61 of 332) or recessively (80 of 332) inherited QTL and a negligible number displaying the characteristics of overdominant inheritance. Comparison of the mode of inheritance of QTL revealed that several metabolite pairs displayed a similar mode of inheritance of QTL at the same chromosomal loci. Evaluation of the association between morphological and metabolic traits in the ILHs revealed that this correlation was far less prominent, due to a reduced variance in the harvest index within this population. These data are discussed in the context of genomics-assisted breeding for crop improvement, with particular focus on the exploitation of wide biodiversity.

S locus genes and the evolution of self-fertility in Arabidopsis thaliana

Loss of self-incompatibility (SI) in Arabidopsis thaliana was accompanied by inactivation of genes required for SI, including S-LOCUS RECEPTOR KINASE (SRK) and S-LOCUS CYSTEINE-RICH PROTEIN (SCR), coadapted genes that constitute the SI specificity-determining S haplotype. Arabidopsis accessions are polymorphic for PsiSRK and PsiSCR, but it is unknown if the species harbors structurally different S haplotypes, either representing relics of ancestral functional and structurally heteromorphic S haplotypes or resulting from decay concomitant with or subsequent to the switch to self-fertility. We cloned and sequenced the S haplotype from C24, in which self-fertility is due solely to S locus inactivation, and show that this haplotype was produced by interhaplotypic recombination. The highly divergent organization and sequence of the C24 and Columbia-0 (Col-0) S haplotypes demonstrate that the A. thaliana S locus underwent extensive structural remodeling in conjunction with a relaxation of selective pressures that once preserved the integrity and linkage of coadapted SRK and SCR alleles. Additional evidence for this process was obtained by assaying 70 accessions for the presence of C24- or Col-0-specific sequences. Furthermore, analysis of SRK and SCR polymorphisms in these accessions argues against the occurrence of a selective sweep of a particular allele of SCR, as previously proposed.

Morphological variation in tomato: a comprehensive study of quantitative trait loci controlling fruit shape and development

Variation in fruit morphology is a prevalent characteristic among cultivated tomato. The genetic and developmental mechanisms underlying similarities and differences in shape between the fruit of two elongated tomato varieties were investigated. Fruit from two F2 populations constructed from either Solanum lycopersicum cv. Howard German or cv. Banana Legs crossed with S. pimpinellifolium accession LA1589, and one BC1 population constructed with S. lycopersicum Howard German as the recurrent parent, were analysed for shape by using a new software program Tomato Analyzer. Quantitative trait loci (QTLs) controlling 15 individual shape attributes were mapped by both single and multitrait composite interval mapping in each population. In addition, principal components analysis and canonical discriminant analysis were conducted on these shape attributes to determine the greatest sources of variation among and between the populations. Individual principal components and canonical variates were subjected to QTL analysis to map regions of the genome influencing fruit shape in the cultivars. Common and unique regions, as well as previously known and novel QTLs, underlying fruit morphology in tomato were identified. Four major loci were found to control multiple fruit shape traits, principal components, and canonical variates in the populations. In addition, QTLs associated with the principal components better revealed regions of the genome that varied among populations than did the QTL associated with canonical variates. The QTL identified can be compared across additional populations of tomato and other fruit-bearing crop species.

A paracentric inversion suppresses genetic recombination at the FON3 locus with breakpoints corresponding to sequence gaps on rice chromosome 11L

Paracentric inversion is known to inhibit genetic recombination between normal and inverted chromosomal segments in heterozygous arrangements. Insect inversion polymorphisms have been studied to reveal adaptive processes for maintaining genetic variation. We report the first paracentric inversion in rice (Oryza sativa), which was discovered in our effort to clone the floral organ number gene FON3. Recombination at the FON3 locus on the long arm of chromosome 11 was severely suppressed over a distance of more than 36 cM. An extensive screening among 8,242 F(2) progeny failed to detect any recombinants. Cytological analysis revealed a loop-like structure on pachytene chromosomes, whereas FISH analysis showed the migration of a BAC clone from a distal location to a position closer to the centromere. Interestingly, the locations where the genetic recombination suppression began were coincided with the positions of two physical gaps on the chromosome 11, suggesting a correlation between the physical gaps, the inversion breakpoints. Transposons and retrotransposons, and tandemly arranged members of gene families were among the sequences immediately flanking the gaps. Taken together, we propose that the genetic suppression at the FON3 locus was caused by a paracentric inversion. The possible genetic mechanism causing such a spontaneous inversion was proposed.

Plant development: new models and approaches bring progress

In August 2006, plant biologists gathered at the FASEB `Mechanisms in Plant Development' meeting in Vermont, which was organized by Laurie Smith and Ueli Grossniklaus. A variety of plant developmental mechanisms were presented at this meeting and, although many talks focused on Arabidopsis thalianaas a primary model in which to study plant development, research in maize,tomato, Chlamydomonas and other plants also provided insight into various topics, such as cell-type specification, small RNA biosynthesis and action, hormone perception and transport, and cell and organ size.

Homeologous recombination in Solanum lycopersicoides introgression lines of cultivated tomato

A library of "introgression lines" containing Solanum lycopersicoides chromosome segments in the genetic background of cultivated tomato (Lycopersicon esculentum) was used to study factors affecting homeologous recombination. Recombination rates were estimated in progeny of 43 heterozygous introgressions and whole-chromosome substitution lines, together representing 11 of the 12 tomato chromosomes. Recombination within homeologous segments was reduced to as little as 0-10% of expected frequencies. Relative recombination rates were positively correlated with the length of introgressed segments on the tomato map. The highest recombination (up to 40-50% of normal) was observed in long introgressions or substitution lines. Double-introgression lines containing two homeologous segments on opposite chromosome arms were synthesized to increase their combined length. Recombination was higher in the double than in the single segment lines, despite a preference for crossovers in the region of homology between segments. A greater increase in homeologous recombination was obtained by crossing the S. lycopersicoides introgression lines to L. pennellii--a phylogenetically intermediate species--or to L. esculentum lines containing single L. pennellii segments on the same chromosome. Recombination rates were highest in regions of overlap between S. lycopersicoides and L. pennellii segments. The potential application of these results to breeding with introgression lines is discussed.

Current status and the future of fluorescence in situ hybridization (FISH) in plant genome research

Fluorescence in situ hybridization (FISH), which allows direct mapping of DNA sequences on chromosomes, has become the most important technique in plant molecular cytogenetics research. Repetitive DNA sequence can generate unique FISH patterns on individual chromosomes for karyotyping and phylogenetic analysis. FISH on meiotic pachytene chromosomes coupled with digital imaging systems has become an efficient method to develop physical maps in plant species. FISH on extended DNA fibers provides a high-resolution mapping approach to analyze large DNA molecules and to characterize large genomic loci. FISH-based physical mapping provides a valuable complementary approach in genome sequencing and map-based cloning research. We expect that FISH will continue to play an important role in relating DNA sequence information to chromosome biology. FISH coupled with immunoassays will be increasingly used to study features of chromatin at the cytological level that control expression and regulation of genes.

Fine mapping of a quantitative trait locus for grain number per panicle from wild rice (Oryza rufipogon Griff.)

SIL040, an introgression line (IL) developed by introgressing chromosomal segments from an accession of Oryza rufipogon into an indica cultivar Guichao 2, showed significantly less grains per panicle than the recurrent parent Guichao 2. Quantitative trait locus (QTL) analysis in F2 and F3 generations derived from the cross between SIL040 and Guichao 2 revealed that gpa7, a QTL located on the short arm of chromosome 7, was responsible of this variation. Alleles from O. rufipogon decreased grains per panicle. To fine mapping of gpa7, a high-resolution map with 1,966 F2 plants derived from the cross between SIL040 and Guichao 2 using markers flanking gpa7 was constructed, and detailed quantitative evaluation of the structure of main panicle of each of F3 families derived from recombinants screened was performed. By two-step substitution mapping, gpa7 was finally narrowed down to a 35-kb region that contains five predicted genes in cultivated rice. The fact that QTLs for five panicle traits (length of panicle, primary branches per panicle, secondary branches per panicle, grains on primary branches and grains on secondary branches) were all mapped in the same interval as that for gpa7 suggested that this locus was associated with panicle structure, showing pleiotropic effects. The characterizing of panicle structure of IL SIL040 further revealed that, during the domestication from common wild allele to cultivated rice one at gpa7, not only the number of branches and grains per panicle increased significantly, more importantly, but also the ratio of secondary branches per panicle to total branches per panicle and the ratio of grains on secondary branches per panicle to total grains per panicle increased significantly. All these results reinforced the idea that gpa7 might play an important role in the regulation of grain number per panicle and the ratio of secondary branches per panicle during the domestication of rice panicle.

Development of a controlled vocabulary and software application to analyze fruit shape variation in tomato and other plant species

The domestication and improvement of fruit-bearing crops resulted in a large diversity of fruit form. To facilitate consistent terminology pertaining to shape, a controlled vocabulary focusing specifically on fruit shape traits was developed. Mathematical equations were established for the attributes so that objective, quantitative measurements of fruit shape could be conducted. The controlled vocabulary and equations were integrated into a newly developed software application, Tomato Analyzer, which conducts semiautomatic phenotypic measurements. To demonstrate the utility of Tomato Analyzer in the detection of shape variation, fruit from two F2 populations of tomato (Solanum spp.) were analyzed. Principal components analysis was used to identify the traits that best described shape variation within as well as between the two populations. The three principal components were analyzed as traits, and several significant quantitative trait loci (QTL) were identified in both populations. The usefulness and flexibility of the software was further demonstrated by analyzing the distal fruit end angle of fruit at various user-defined settings. Results of the QTL analyses indicated that significance levels of detected QTL were greatly improved by selecting the setting that maximized phenotypic variation in a given population. Tomato Analyzer was also applied to conduct phenotypic analyses of fruit from several other species, demonstrating that many of the algorithms developed for tomato could be readily applied to other plants. The controlled vocabulary, algorithms, and software application presented herein will provide plant scientists with novel tools to consistently, accurately, and efficiently describe two-dimensional fruit shapes.

Development of a controlled vocabulary and software application to analyze fruit shape variation in tomato and other plant species

The domestication and improvement of fruit-bearing crops resulted in a large diversity of fruit form. To facilitate consistent terminology pertaining to shape, a controlled vocabulary focusing specifically on fruit shape traits was developed. Mathematical equations were established for the attributes so that objective, quantitative measurements of fruit shape could be conducted. The controlled vocabulary and equations were integrated into a newly developed software application, Tomato Analyzer, which conducts semiautomatic phenotypic measurements. To demonstrate the utility of Tomato Analyzer in the detection of shape variation, fruit from two F2 populations of tomato (Solanum spp.) were analyzed. Principal components analysis was used to identify the traits that best described shape variation within as well as between the two populations. The three principal components were analyzed as traits, and several significant quantitative trait loci (QTL) were identified in both populations. The usefulness and flexibility of the software was further demonstrated by analyzing the distal fruit end angle of fruit at various user-defined settings. Results of the QTL analyses indicated that significance levels of detected QTL were greatly improved by selecting the setting that maximized phenotypic variation in a given population. Tomato Analyzer was also applied to conduct phenotypic analyses of fruit from several other species, demonstrating that many of the algorithms developed for tomato could be readily applied to other plants. The controlled vocabulary, algorithms, and software application presented herein will provide plant scientists with novel tools to consistently, accurately, and efficiently describe two-dimensional fruit shapes.