Electroporation-mediated genome editing in vitrified/warmed mouse zygotes created by IVF via ultra-superovulation

Electroporation-mediated genome editing in vitrified/warmed porcine zygotes obtained in vitro

Clustered regularly interspaced short palindromic repeats (CRISPR)-associated 9 (Cas9) system is the most efficient and widely used technology for genome editing in all sorts of organisms, including livestock animals. Here, we examined the feasibility of CRISPR/Cas9-derived genome editing (GE) in vitrified porcine zygotes, where the flexible planning of experiments in time and space is expected. OCT4 and CD46 genes were targeted, and the Cas9/sgRNA ribonucleoprotein complexes (RNP) were electroporated into zygotes at 2 h after warming. Vitrification or GE alone did not significantly reduce the developmental rates to the blastocyst stage. However, vitrification followed by GE significantly reduced blastocyst development. Sequencing analysis of the resultant blastocysts revealed efficient GE for both OCT4 (nonvitrified: 91.0%, vitrified: 95.1%) and CD46 (nonvitrified: 94.5%, vitrified: 93.2%), with no significant difference among them. Immunocytochemical analysis showed that GE-blastocysts lacked detectable proteins. They were smaller in size, and the cell numbers were significantly reduced compared with the control (p < 0.01). Finally, we demonstrated that double GE efficiently occurs (100%) when the OCT4-RNP and CD46-RNP are simultaneously introduced into zygotes after vitrification/warming. This is the first demonstration that vitrified porcine zygotes can be used in GE as efficiently as nonvitrified ones.

Development and Genome Mutation of Bovine Zygotes Vitrified Before and After Genome Editing via Electroporation

BACKGROUND: Cryopreservation of bovine zygotes allows for a flexible schedule of genome editing via electroporation. However, vitrification-induced cell membrane damage may not only affect embryonic development but also genome mutation. OBJECTIVE: To investigate the effects of vitrification of zygotes before and after electroporation treatments on the development and genome mutation of bovine presumptive zygotes. MATERIALS AND METHODS: In vitro-derived bovine zygotes were electroporated with the CRISPR/Cas9 system immediately (Vitrified-EP) or 2 h after incubation (Vitrified-2h-EP) following vitrification and warming, or electroporated before vitrification (EP-vitrified). RESULTS: The development rates of vitrified-warmed zygotes were significantly lower (p < 0.05) than those of control zygotes that were not vitrified. Moreover, no differences were observed in the mutation rates and mutation efficiency of the blastocysts resulting from electroporated zygotes, irrespective of the timing of electroporation treatment. CONCLUSION: Our results suggest that vitrification before and after electroporation treatments does not affect the genome editing of zygotes.

Synchronization of the ovulation and copulation timings increased the number of in vivo fertilized oocytes in superovulated female mice

The number of sperm that reaches the oocytes in mammalian species is limited. In mice, 8-10 oocytes are ovulated, a similar number of sperm reaches the oocytes, and nearly all oocytes are fertilized via natural mating. Meanwhile, our improved superovulation technique (ultrasuperovulation: administration of inhibin antiserum and equine chorionic gonadotropin [IASe]) produced 100 oocytes from a single female C57BL/6 mouse but resulted in only approximately 20 fertilized oocytes via mating. We hypothesized that sperm shortage in the ampulla might cause this low fertilization rate. Mice were mated in the proestrus stage or after hormone injection, but ovulation timing was not considered. In clinical application, the rhythm method supports fertilization by testing the ovulation period and synchronizing the ovulation and copulation timings. Therefore, this study examined the effects of ovulation and copulation timings on in vivo fertilization in female mice with IASe. Synchronization of the ovulation and copulation timings increased fertilization efficiency in female mice with ultrasuperovulation. The number of embryos obtained post ovulation was three times higher than that obtained pre ovulation. This study suggests that synchronized ovulation and copulation timings improve the efficiency of in vivo fertilization in IASe-treated female mice. This technique can be used to produce genetically modified mice and develop technologies for infertility treatment.

Bulk vitrification of in vitro produced bovine zygotes without reducing developmental competence to the blastocyst stage

Cryopreservation of mammalian zygotes can be advantageous since it enables their flexile use in time and space for alternative purposes such as genome editing. Here we report a simple, quick and inexpensive vitrification protocol for in vitro produced bovine zygotes which enables their bulk preservation. Slaughterhouse-derived oocytes were subjected to in vitro maturation and fertilization (IVF). Ten h after IVF, cumulus-enclosed zygotes were equilibrated in 2% (v/v) ethylene glycol + 2% (v/v) propylene glycol for 13-15 min then vitrified in groups of 52-100 in 2 μL microdrops of 17.5% (v/v) ethylene glycol + 17.5% (v/v) propylene glycol supplemented with 0.3 M sucrose and 50 mg/mL polyvinylpyrrolidone. The presence of cumulus cells is important for the success of the process. Therefore, we applied a modified IVF protocol using a short (30 min) co-incubation interval which allowed zygote culture with attached cumulus cells until vitrification and even reduced polyspermy rates without affecting the total fertilization rate. Vitrified zygotes were similar to their non-vitrified counterparts in terms of survival, post-warming development to the blastocyst stage and blastocyst quality measured by cell numbers and cryo-survival. In conclusion, our vitrification protocol integrated with the modified IVF system enabled the quick cryopreservation of bovine zygotes in large groups without reducing their developmental competence to the blastocyst stage.

Recent Advances in the Production of Genome-Edited Rats

The rat is an important animal model for understanding gene function and developing human disease models. Knocking out a gene function in rats was difficult until recently, when a series of genome editing (GE) technologies, including zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and the type II bacterial clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated Cas9 (CRISPR/Cas9) systems were successfully applied for gene modification (as exemplified by gene-specific knockout and knock-in) in the endogenous target genes of various organisms including rats. Owing to its simple application for gene modification and its ease of use, the CRISPR/Cas9 system is now commonly used worldwide. The most important aspect of this process is the selection of the method used to deliver GE components to rat embryos. In earlier stages, the microinjection (MI) of GE components into the cytoplasm and/or nuclei of a zygote was frequently employed. However, this method is associated with the use of an expensive manipulator system, the skills required to operate it, and the egg transfer (ET) of MI-treated embryos to recipient females for further development. In vitro electroporation (EP) of zygotes is next recognized as a simple and rapid method to introduce GE components to produce GE animals. Furthermore, in vitro transduction of rat embryos with adeno-associated viruses is potentially effective for obtaining GE rats. However, these two approaches also require ET. The use of gene-engineered embryonic stem cells or spermatogonial stem cells appears to be of interest to obtain GE rats; however, the procedure itself is difficult and laborious. Genome-editing via oviductal nucleic acids delivery (GONAD) (or improved GONAD (i-GONAD)) is a novel method allowing for the in situ production of GE zygotes existing within the oviductal lumen. This can be performed by the simple intraoviductal injection of GE components and subsequent in vivo EP toward the injected oviducts and does not require ET. In this review, we describe the development of various approaches for producing GE rats together with an assessment of their technical advantages and limitations, and present new GE-related technologies and current achievements using those rats in relation to human diseases.

The versatile electric condition in mouse embryos for genome editing using a three-step square-wave pulse electroporator

Technique for Animal Knockout system by Electroporation (TAKE) is a simple and efficient method to generate genetically modified (GM) mice using the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) systems. To reinforce the versatility of electroporation used for gene editing in mice, the electric condition was optimized for vitrified-warmed mouse embryos, and applied to the fresh embryos from widely used inbred strains (C57BL/6NCr, BALB/cCrSlc, FVB/NJcl, and C3H/HeJJcl). The electric pulse settings (poring pulse: voltage, 150 V; pulse width, 1.0 ms; pulse interval, 50 ms; number of pulses, +4; transfer pulse: voltage, 20 V; pulse width, 50 ms; pulse interval, 50 ms; number of pulses, ±5) were optimal for vitrified-warmed mouse embryos, which could efficiently deliver the gRNA/Cas9 complex into the zygotes without zona pellucida thinning process and edit the target locus. These electric condition efficiently generated GM mice in widely used inbred mouse strains. In addition, electroporation using the electrode with a 5 mm gap could introduce more than 100 embryos within 5 min without specific pretreatment and sophisticated technical skills, such as microinjection, and exhibited a high developmental rate of embryos and genome-editing efficiency in the generated offspring, leading to the rapid and efficient generation of genome editing mice. The electric condition used in this study is highly versatile and can contribute to understanding human diseases and gene functions by generating GM mice more easily and efficiently.

Advances in Genome Editing and Application to the Generation of Genetically Modified Rat Models

The rat has been extensively used as a small animal model. Many genetically engineered rat models have emerged in the last two decades, and the advent of gene-specific nucleases has accelerated their generation in recent years. This review covers the techniques and advances used to generate genetically engineered rat lines and their application to the development of rat models more broadly, such as conditional knockouts and reporter gene strains. In addition, genome-editing techniques that remain to be explored in the rat are discussed. The review also focuses more particularly on two areas in which extensive work has been done: human genetic diseases and immune system analysis. Models are thoroughly described in these two areas and highlight the competitive advantages of rat models over available corresponding mouse versions. The objective of this review is to provide a comprehensive description of the advantages and potential of rat models for addressing specific scientific questions and to characterize the best genome-engineering tools for developing new projects.

Archiving genetically altered animals: a review of cryopreservation and recovery methods for genome edited animals

With the ever-expanding numbers of genetically altered (GA) animals created in this new age of CRISPR/Cas, tools for helping the management of this vast and valuable resource are essential. Cryopreservation of embryos and germplasm of GA animals has been a widely used tool for many years now, allowing for the archiving, distribution and colony management of stock. However, each year brings an array of advances, improving survival rates of embryos, success rates of in-vitro fertilisation and the ability to better share lines and refine the methods to preserve them. This article will focus on the mouse field, referencing the latest developments and assessing their efficacy and ease of implementation, with a brief note on other common genetically altered species (rat, zebrafish, Xenopus, avian species and non-human Primates).

Electroporation-Mediated Genome Editing of Livestock Zygotes

The introduction of genome editing reagents into mammalian zygotes has traditionally been accomplished by cytoplasmic or pronuclear microinjection. This time-consuming procedure requires expensive equipment and a high level of skill. Electroporation of zygotes offers a simplified and more streamlined approach to transfect mammalian zygotes. There are a number of studies examining the parameters used in electroporation of mouse and rat zygotes. Here, we review the electroporation conditions, timing, and success rates that have been reported for mice and rats, in addition to the few reports about livestock zygotes, specifically pigs and cattle. The introduction of editing reagents at, or soon after, fertilization can help reduce the rate of mosaicism, the presence of two of more genotypes in the cells of an individual; as can the introduction of nuclease proteins rather than mRNA encoding nucleases. Mosaicism is particularly problematic in large livestock species with long generation intervals as it can take years to obtain non-mosaic, homozygous offspring through breeding. Gene knockouts accomplished via the non-homologous end joining pathway have been more widely reported and successfully accomplished using electroporation than have gene knock-ins. Delivering large DNA plasmids into the zygote is hindered by the zona pellucida (ZP), and the majority of gene knock-ins accomplished by electroporation have been using short single stranded DNA (ssDNA) repair templates, typically less than 1 kb. The most promising approach to deliver larger donor repair templates of up to 4.9 kb along with genome editing reagents into zygotes, without using cytoplasmic injection, is to use recombinant adeno-associated viruses (rAAVs) in combination with electroporation. However, similar to other methods used to deliver clustered regularly interspaced palindromic repeat (CRISPR) genome-editing reagents, this approach is also associated with high levels of mosaicism. Recent developments complementing germline ablated individuals with edited germline-competent cells offer an approach to avoid mosaicism in the germline of genome edited founder lines. Even with electroporation-mediated delivery of genome editing reagents to mammalian zygotes, there remain additional chokepoints in the genome editing pipeline that currently hinder the scalable production of non-mosaic genome edited livestock.

Cryopreservation of mouse resources

The cryopreservation of sperm and embryos is useful to efficiently archive valuable resources of genetically engineered mice. Till date, more than 60,000 strains of genetically engineered mice have been archived in mouse banks worldwide. Researchers can request for the archived mouse strains for their research projects. The research infrastructure of mouse banks improves the availability of mouse resources, the productivity of research projects, and the reproducibility of animal experiments. Our research team manages the mouse bank at the Center for Animal Resources and Development in Kumamoto University and continuously develops new techniques in mouse reproductive technology to efficiently improve the system of mouse banking. In this review, we introduce the activities of mouse banks and the latest techniques used in mouse reproductive technology.

One-step genome editing of porcine zygotes through the electroporation of a CRISPR/Cas9 system with two guide RNAs

In the present study, we investigated whether electroporation could be used for one-step multiplex CRISPR/Cas9-based genome editing, targeting IL2RG and GHR in porcine embryos. First, we evaluated and selected guide RNAs (gRNAs) by analyzing blastocyst formation rates and genome editing efficiency. This was performed in embryos electroporated with one of three different gRNAs targeting IL2RG or one of two gRNAs targeting GHR. No significant differences in embryo development rates were found between control embryos and those subjected to electroporation, irrespective of the target gene. Two gRNAs targeting IL2RG (nos. 2 and 3) contributed to an increased biallelic mutation rate in porcine blastocysts compared with gRNA no. 1. There were no significant differences in the mutation rates between the two gRNAs targeting GHR. In our next experiment, the mutation efficiency and the development of embryos simultaneously electroporated with gRNAs targeting IL2RG and GHR were investigated. Similar embryo development rates were observed between embryos electroporated with two gRNAs and control embryos. When IL2RG-targeting gRNA no. 2 was used with GHR-targeting gRNAs no. 1 or no. 2, a significantly higher double biallelic mutation rate was observed than with IL2RG-targeting gRNA no. 3. In conclusion, we demonstrate the feasibility of using electroporation to transfer multiple gRNAs and Cas9 into porcine zygotes, enabling the double biallelic mutation of multiple genes with favorable embryo survival.

Efficient production of immunodeficient non-obese diabetic/Shi-scid IL2rγnull mice via the superovulation technique using inhibin antiserum and gonadotropin

Severe immunodeficient mice are an essential tool for the examination of the efficacy and safety of new therapeutic technologies as a humanized model. Previously, non-obese diabetic (NOD)/Shi-scid IL2rγ^null (NOG) mice were established as immunodeficient mice by combining interleukin-2 receptor-γ chain-knockout mice and NOD/Shi-scid mice. The NOG mice are used frequently in the research of therapeutic monoclonal antibodies and regenerative medicine for human diseases. Establishment of an efficient production system of NOG mice, using optimized reproductive techniques, is required to accelerate research. In this study, we investigated the efficacy of the superovulation technique using equine chorionic gonadotropin (eCG) and inhibin antiserum (IAS) in NOG mice of various ages (4, 8, 12, 24, or 54 weeks). Additionally, we examined the fertilizing and developmental ability of the oocytes through in-vitro fertilization using frozen-thawed sperm, embryo culture and embryo transfer. The results showed that NOG mice produced the highest number of oocytes at 12 weeks old following the co-administration of eCG and IAS (collectively IASe) (70 oocytes/female). IASe was more effective in increasing the number of oocytes v. eCG at all ages. The IASe-derived oocytes demonstrated the ability to fertilize and develop into blastocysts and pups. Finally, we demonstrated that three strains of genetically modified NOG mice were efficiently produced through the optimized reproductive techniques. In summary, we developed an efficient system for the production of immunodeficient mice using 12-week-old, IASe-treated female NOG mice.

Rapid and high-efficient generation of mutant mice using freeze-thawed embryos of the C57BL/6J strain

BACKGROUND

The CRISPR/Cas9 technique has undergone many modifications to decrease the effort and shorten the time needed for efficient production of mutant mice. The use of fresh embryos consumes time and effort during oocytes preparation and fertilization before every experiment, and freeze-thawed embryos overcome this limitation. However, cryopreservation of 1-cell embryos is challenging.

NEW METHOD

We introduce a protocol that combines a modified method for cryopreserving 1-cell C57BL/6J embryos with optimized electroporation conditions that were used to deliver CRISPR reagents into embryos, 1 h after thawing.

RESULTS

Freeze-thawed 1-cell embryos showed similar survival rates and surprisingly high developmental rates compared to fresh embryos. Using our protocol, we generated several lines of mutant mice: knockout mice via non-homologous end joining (NHEJ) and knock-in mice via homology-directed repair (HDR) with high-efficient mutation rates (100%, 75% respectively) and a low mosaic rate within 4 weeks.

COMPARISON WITH EXISTING METHOD (S)

Our protocol associates the use of freeze-thawed embryos from an inbred strain and electroporation, and can be performed by laboratory personnel with basic training in embryo manipulation to generate mutant mice within short time periods.

CONCLUSION

We developed a simple, economic, and robust protocol facilitating the generation of genetically modified mice, bypassing the need of backcrossing, with a high efficiency and a low mosaic rate. It makes the preparation of mouse models of human diseases a simple task with unprecedented ease, pace, and efficiency.