Nanocellulose Extracted from Defoliation of Ginkgo Leaves

Development of nanocellulose hydrogels for application in the food and biomedical industries: A review

As the most abundant and renewable natural resource, cellulose has attracted significant attention and research interest for the production of hydrogels (HGs). To address environmental issues and emerging demands, the benefits of naturally produced HGs include excellent mechanical properties and superior biocompatibility. HGs are three-dimensional networks created by chemical or physical cross-linking of linear or branched hydrophilic polymers and have high capacity for absorption of water and biological fluids. Although widely used in the food and biomedical fields, most HGs are not biodegradable. Nanocellulose hydrogels (NC-HGs) have been extensively applied in the food industry for detection of freshness, chemical additives, and substitutes, as well as the biomedical field for use as bioengineering scaffolds and drug delivery systems owing to structural interchangeability and stimuli-responsive properties. In this review article, the sources, structures, and preparation methods of NC-HGs are described, applications in the food and biomedical industries are summarized, and current limitations and future trends are discussed.

Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment

(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.

Preparation and research of PCL/cellulose composites: Cellulose derived from agricultural wastes

For the rational use of agricultural wastes, bagasse, orange peel and wheat bran were used to fabricate bio-based polymer materials. Cellulose was extracted from the three different agricultural wastes, and poly(ε-caprolactone) (PCL) was used as the matrix material. PCL was mixed with nanocrystalline cellulose (CNC), extracted bagasse cellulose (GC), orange peel cellulose (JC) and wheat bran cellulose (MC) by solution casting. Morphology and structure of the extracted cellulose were studied by Scanning Electron Microscope, Fourier Infrared spectrometer, thermogravimetry and X-ray diffractometer. The influence of GC, JC, MC on the crystallization process and mechanical properties of PCL was investigated by DSC and tensile test. Experimental results show that the addition of CNC, GC, JC, MC increases the crystallization temperature of PCL, accelerates the crystallization process of PCL, and improves the tensile property of PCL.

Sustainable carboxylated cellulose filters for efficient removal and recovery of lanthanum

Carboxylated cellulose filters were fabricated by oxidation of a cellulose fibrous mat via TEMPO-mediated oxidation. These carboxylated cellulose filters were employed as sustainable filters for removal and recovery of lanthanum ions (La (III)) with high adsorption capability. The surface chemistry of the carboxylated cellulose fibers before and after adsorption of La (III) was investigated systematically. The distribution of La (III) on carboxylated cellulose fibers were explored by EDX mapping approach, which revealed that the adsorption occurred on both the surface and the internal structure of the cellulose fibers. The kinetics and isotherms of the adsorption were conducted to understand the adsorption mechanism of the carboxylated cellulose filter and to learn the maximum adsorption capacity for La (III) which was as high as 33.7 mg/g. The adsorption selectivity of the carboxylated cellulose filter for La (III) was determined when interfering ions including mono- and di-covalent ions were involved. The carboxylated cellulose filter exhibited high adsorption capability and high permeation flux evidenced by the breakthrough curves of the dynamic adsorption of La (III) under an extremely low pressure of 0.07 kPa. A variety of desorption reagents were selected to recover lanthanum from the carboxylated cellulose filter, where the optimized conditions for recovery were explored. Finally, a spiral wound cartridge of the carboxylated cellulose fibrous mat was fabricated and the removal and the recovery of La (III, 2.5 ppm) from massive lanthanum-containing water were demonstrated. It was very impressive that the high rejection ratio of 94.3% was achieved under the low pressure drop of 3.0 kPa remaining throughout the separation process, and the treated solution volume was high up to 21.4 L, which was about six-times higher than that of commercially available nanofibrous adsorption membranes, indicating that the carboxylated cellulose filter could be used as a highly efficient adsorption medium for industrial recovery of rare earth metals.