Current Approaches of Bone Morphogenetic Proteins in Dentistry

Supra-Alveolar Bone Regeneration: Progress, Challenges, and Future Perspectives

Periodontitis is a highly prevalent disease that damages the supporting tissues of a tooth, including the alveolar bone. Alveolar bone loss owing to periodontitis is broadly categorized as supra-alveolar and intra-alveolar bone loss. In intra-alveolar bone loss, the defect has an angular or oblique orientation to the long axis of the tooth in an apical direction. In contrast, the defect is perpendicular to the long axis of the tooth in supra-alveolar bone loss. Unlike intra-alveolar bone defects, supra-alveolar bone defects lack supporting adjacent space, which makes supra-alveolar bone regeneration more challenging. In addition, the limited availability of resources in terms of vascularity and underlying tissues is another obstacle to supra-alveolar bone regeneration. Currently, supra-alveolar bone loss is the least predictable periodontal defect type in regenerative periodontal therapy. In addition, supra-alveolar bone loss is much more common than other alveolar bone loss. Despite its prevalence, research on supra-alveolar bone regeneration remains sparse, indicating an unmet need for significant research efforts in this area. This review summarize recent advances, obstacles, and future directions in the field of supra-alveolar bone regeneration. We discuss the biomaterials, bioactive molecules, and cells that have been tested for supra-alveolar bone regeneration, followed by pre-clinical and clinical approaches employed in this field. Additionally, we highlight obstacles and present future directions that will propel supra-alveolar bone research forward.

Desmarestia anceps Montagne modulates inflammatory response in experimental periodontitis in male Wistar rats

OBJECTIVE

Desmarestia anceps Montagne (D. anceps) seaweed has been shown to play a range of biologic activities, such as anti-inflammatory and antioxidant properties. The purpose of this study was to investigate the effects of D. anceps on pathogenesis of ligature-induced experimental periodontitis in rats.

DESIGN

Fifty-four male Wistar rats were randomly divided into six groups. Doses of D. anceps (100 and 200 mg/kg) were administered for 14 days to animals with or without ligature-induced periodontitis, in order to compare to control groups (vehicle solution). Morphometric registration of alveolar bone loss and histological analysis were conducted. Inflammatory cells were counted on hematoxylin-eosin-stained slides. Immunohistochemical expressions for interleukin-1 beta (IL-1β), tumor necrosis factor (TNF-α), receptor activator of nuclear factor kappa-Β ligand (RANKL) and bone morphogenetic protein 2 (BMP-2) were evaluated.

RESULTS

Alveolar bone loss was higher in groups exposed to ligature-induced periodontitis, but no significant differences were observed comparing different treatment and control groups. Animals that received D. anceps extracts showed significant lower counts of inflammatory cells. D. anceps promoted increased expression of BMP-2 and inhibited IL-1β, TNF-α and RANKL.

CONCLUSION

D. anceps modulates inflammatory response in experimental periodontitis in rats. Further pharmacological and immunological analyses are warranted.

Recent Clinical Treatment and Basic Research on the Alveolar Bone

The periodontal ligament is located between the bone (alveolar bone) and the cementum of the tooth, and it is connected by tough fibers called Sharpey’s fibers. To maintain healthy teeth, the foundation supporting the teeth must be healthy. Periodontal diseases, also known as tooth loss, cause the alveolar bone to dissolve. The alveolar bone, similar to the bones in other body parts, is repeatedly resorbed by osteoclasts and renewed by osteogenic cells. This means that an old bone is constantly being resorbed and replaced by a new bone. In periodontal diseases, the alveolar bone around the teeth is absorbed, and as the disease progresses, the alveolar bone shrinks gradually. In most cases, the resorbed alveolar bone does not return to its original form even after periodontal disease is cured. Gum covers the tooth surface so that it matches the shape of the resorbed alveolar bone, exposing more of the tooth surface than before, making the teeth look longer, leaving gaps between the teeth, and in some cases causing teeth to sting. Previously, the only treatment for periodontal diseases was to stop the disease from progressing further before the teeth fell out, and restoration to the original condition was almost impossible. However, a treatment method that can help in the regeneration of the supporting tissues of the teeth destroyed by periodontal diseases and the restoration of the teeth to their original healthy state as much as possible is introduced. Recently, with improvements in implant material properties, implant therapy has become an indispensable treatment method in dentistry and an important prosthetic option. Treatment methods and techniques, which are mainly based on experience, have gradually accumulated scientific evidence, and the number of indications for treatment has increased. The development of bone augmentation methods has contributed remarkably to the expansion of indications, and this has been made possible by various advances in materials science. The induced pluripotent stem cell (iPS) cell technology for regenerating periodontal tissues, including alveolar bone, is expected to be applied in the treatment of diseases, such as tooth loss and periodontitis. This review focuses on the alveolar bone and describes clinical practice, techniques, and the latest basic research.

Biomimetic approaches and materials in restorative and regenerative dentistry: review article

Biomimetics is a branch of science that explores the technical beauty of nature. The concept of biomimetics has been brilliantly applied in famous applications such as the design of the Eiffel Tower that has been inspired from the trabecular structure of bone. In dentistry, the purpose of using biomimetic concepts and protocols is to conserve tooth structure and vitality, increase the longevity of restorative dental treatments, and eliminate future retreatment cycles. Biomimetic dental materials are inherently biocompatible with excellent physico-chemical properties. They have been successfully applied in different dental fields with the advantages of enhanced strength, sealing, regenerative and antibacterial abilities. Moreover, many biomimetic materials were proven to overcome significant limitations of earlier available generation counterpart. Therefore, this review aims to spot the light on some recent developments in the emerging field of biomimetics especially in restorative and regenerative dentistry. Different approaches of restoration, remineralisation and regeneration of teeth are also discussed in this review. In addition, various biomimetic dental restorative materials and tissue engineering materials are discussed.

Natural Polymers for the Maintenance of Oral Health: Review of Recent Advances and Perspectives

The success of modern dental treatment is strongly dependent on the materials used both temporarily and permanently. Among all dental materials, polymers are a very important class with a wide spectrum of applications. This review aims to provide a state-of-the-art overview of the recent advances in the field of natural polymers used to maintain or restore oral health. It focuses on the properties of the most common proteins and polysaccharides of natural origin in terms of meeting the specific biological requirements in the increasingly demanding field of modern dentistry. The use of naturally derived polymers in different dental specialties for preventive and therapeutic purposes has been discussed. The major fields of application cover caries and the management of periodontal diseases, the fabrication of membranes and scaffolds for the regeneration of dental structures, the manufacturing of oral appliances and dentures as well as providing systems for oral drug delivery. This paper also includes a comparative characteristic of natural and synthetic dental polymers. Finally, the current review highlights new perspectives, possible future advancements, as well as challenges that may be encountered by researchers in the field of dental applications of polymers of natural origin.

Oncostatin M enhances osteogenic differentiation of dental pulp stem cells derived from supernumerary teeth

Supernumerary tooth (ST) may arise from uncertain developmental abnormalities or underlying genetic causes, and the extraction at the early age is recommended. Dental pulp stem cells (DPSCs) are the valuable resource for the regeneration of tooth and related craniofacial structures. DPSCs isolated from ST (sDPSCs) have not been fully characterized despite the potential in the applications. The objectives of this study are the efficient isolation of sDPSCs and the analysis of the properties as stem cells. sDPSCs were established by hammer-cracking and separation of the intact pulp from ST. sDPSCs in the culture were examined by light microscope and flow cytometer for the morphology and the surface marker expression. sDPSCs exhibited the cellular morphology of typical mesenchymal stem cells and expressed CD44, CD73, CD90, CD105 and CD166, but not CD14, CD34 or CD45. sDPSCs showed the differentiation potential toward osteogenic, chondrogenic and adipogenic lineages. During osteogenic differentiation, the stimulation by Oncostatin M enhanced the differentiation and significantly increased the expression of genes involved in the hard tissue repair, such as BMP2, BMP4, BMP6 and RUNX2. sDPSCs can be effectively derived from ST and displays the characteristics of mesenchymal stem cells in the maintenance and the differentiation. sDPSCs satisfies the quality as DPSCs thus provide the valuable resource to the regenerative therapy.

Risk factors in bone augmentation procedures

Bone augmentation is an extremely common procedure in implant dentistry today because of significant advancements with reactive biomaterials, a better understanding of the mechanism of action that is found with growth factors contained in platelets, and improvements in surgical techniques. The expectation is for the surgeon to place the dental implant in the position that best serves the requirements of the prosthetic restorations. With the increasing demands that patients have for ideal prosthetic results, surgeons are expected to predictably augment both hard and soft tissues to provide the anticipated esthetic and functional outcomes. Bone grafting can be performed before, during, and after the implant placement; however, these augmentation procedures come with increased cost, the risk of complications such as infection or failure, and lengthening of the total treatment time. In addition, a plethora of grafting materials are available commercially, where they are often inadequately studied, or there is minimal information regarding their predictability or long-term success, or ability to support dental implants. It is clear that although the surgical field has seen major progress since early implant surgical techniques in the 1980s, major challenges still exist with hard tissue augmentation procedures. This review will discuss these challenges that are increased and often specific to bone graft healing, and which are becoming more common as implant site development often requires bone augmentation to improve volume or contour deficiencies. The risk factors that patients may present with that will affect outcomes with bone augmentation procedures are identified, and recommendations for the prevention of complications or managing complications once they have occurred are provided.

A clinicoradiographic assessment of 1% metformin gel with platelet-rich fibrin in the treatment of mandibular grade II furcation defects

Background:

Management of furcation defects is challenging, and constantly newer therapeutic strategies are evolving. Platelet-rich fibrin (PRF) is successfully used alone and in combination with various agents in the furcation defects. Lately, metformin (MF), a second generation biguanide has gained popularity owing to its osteogenic potential.

Aims and Objectives:

The aim of the present study was to evaluate the clinical and radiographic effectiveness of open flap debridement (OFD) and PRF when compared to OFD + PRF + 1% MF gel in the management of mandibular Grade II furcation defects.

Materials and Methods:

Thirty mandibular grade II furcation defects were stratified into two groups; in one group OFD and PRF is used, and the other group had an additional MF gel with PRF in OFD. Clinical parameters such as plaque index, modified sulcus bleeding index, probing pocket depth (PD), relative vertical attachment level (RVAL), and relative horizontal attachment level (RHAL) were recorded at baseline and at 6 months. Radiovisiography and ImageJ software were used to evaluate the intrabony defect depth.

Results:

The OFD + PRF + MF group showed significantly higher probing PD reduction, RVAL and RHAL gain than the OFD + PRF group.

Conclusions:

PRF when combined with a potential osteogenic agent like MF can provide a better therapeutic benefit to a furcation involved tooth.

Production of bone mineral material and BMP-2 in osteoblasts cultured on double acid-etched titanium

Background

The study of osteoblasts and their osteogenic functions is essential in order to understand them and their applications in implantology. In this sense, this study try to study BMP-2 production and bone matrix deposition, in addition to other biological variables, in osteoblasts cultured on a rough double acid-etched titanium surface (Osseotite®, Biomet 3i, Palm Beach Garden, Florida, USA) in comparison to a smooth titanium surface (machined) and a control Petri dish.

Material and Methods

An in vitro prospective study. NHOst human osteoblasts from the femur were cultured on three different surfaces: Control group: 25-mm methacrylate dish (n = 6); Machined group: titanium discs with machined surface (n = 6) and Experimental group: titanium discs with a double acid-etched nitric and hydrofluoric Osseotite® acid surface (n = 6). A quantification of the mitochondrial membrane potential, and studies of apoptosis, mobility and adhesion, bone productivity (BMP-2) and cellular bone synthesis were carried out after culturing the three groups for forty-eight hours.

Results

A statistically significant difference was observed in the production of BMP-2 between the experimental group and the other two groups (22.33% ± 11.06 vs. 13.10% ± 5.51 in the machined group and 3.88% ± 3.43 in the control group). Differences in cellular bone synthesis were also observed between the groups (28.34% ± 14.4% in the experimental group vs. 20.03% ± 6.79 in the machined group and 19.34% ± 15.93% in the control group).

Conclusions

In comparison with machined surfaces, Osseotite® surfaces favor BMP-2 production and bone synthesis as a result of the osteoblasts in contact with it.

Key words:BMP-2, Cytoskeleton, cell culture, bone matrix, apoptosis, cell viability.

pH dependent silver nanoparticles releasing titanium implant: A novel therapeutic approach to control peri-implant infection

Peri-implant infection control is crucial for implant fixation and durability. Antimicrobial administration approaches to control peri-implant infection are far from satisfactory. During bacterial infection, pH level around the peri-implant surface decreases as low as pH 5.5. This change of pH can be used as a switch to control antimicrobial drug release from the implant surface. Silver nanoparticles (AgNPs) have broad-spectrum antimicrobial properties. In this study, we aimed to design a pH-dependent AgNPs releasing titania nanotube arrays (TNT) implant for peri-implant infection control. The nanotube arrays were fabricated on the surface of titanium implant as containers; AgNPs were grafted on TNT implant surface via a low pH-sensitive acetal linker (TNT-AL-AgNPs). SEM, TEM, AFM, FTIR as well as XPS data showed that AgNPs have been successfully linked to TNT via acetal linker without affecting the physicochemical characteristics of TNT. The pH 5.5 enhanced AgNPs release from TNT-AL-AgNPs implant compared with pH 7.4. AgNPs released at pH 5.5 robustly increased antimicrobial activities against gram-positive and gram-negative bacteria compared with AgNPs released at pH 7.4. TNT-AL-AgNPs implant enhanced osteoblast proliferation, differentiation, and did not affect osteoblast morphology in vitro. In conclusion, incorporation of AgNPs in TNT via acetal linker maintained the surface characteristics of TNT. TNT-AL-AgNPs implant was biocompatible to osteoblasts and showed osteoinductive properties. AgNPs were released from TNT-AL-AgNPs implant in high dose at pH 5.5, and this release showed strong antimicrobial properties in vitro. Therefore, this novel design of low pH-triggered AgNPs releasing TNT-AL-AgNPs could be an infection-triggered antimicrobial releasing implant model to control peri-implant infection.

Guided Tissue Regeneration in Four Teeth Using a Liquid Polymer Membrane

Periodontal disease is one of the most common diseases diagnosed in dogs and cats. Guided tissue regeneration (GTR) is a treatment alternative to extraction of strategically important teeth. The barrier membrane used in the GTR procedure is of key importance. The purpose of this case series was to evaluate a liquid polymer gel as a membrane for GTR. The polymer gel ( N-methyl-2-pyrrolidone and poly [DL-lactide]) combined with 8.5% doxycycline hyclate was used in place of a traditional membrane in 4 teeth. The teeth were re-examined 6 months postoperatively for radiographic evaluation. A decrease in probing depth and new alveolar bone formation was seen 6 months postoperatively. Improvement in periodontal disease stage was seen in 2 of the 4 teeth. Larger controlled trials with histopathologic evaluation are indicated to further assess the use of this polymer as a membrane in GTR. However, the clinical outcomes of all 4 treated teeth were considered successful.

Dental pulp stem cells. Biology and use for periodontal tissue engineering

Inflammatory periodontal disease is a major cause of loss of tooth-supporting structures. Novel approaches for regeneration of periodontal apparatus is an area of intensive research. Periodontal tissue engineering implies the use of appropriate regenerative cells, delivered through a suitable scaffold, and guided through signaling molecules. Dental pulp stem cells have been used in an increasing number of studies in dental tissue engineering. Those cells show mesenchymal (stromal) stem cell-like properties including self-renewal and multilineage differentiation potentials, aside from their relative accessibility and pleasant handling properties. The purpose of this article is to review the biological principles of periodontal tissue engineering, along with the challenges facing the development of a consistent and clinically relevant tissue regeneration platform. This article includes an updated review on dental pulp stem cells and their applications in periodontal regeneration, in combination with different scaffolds and growth factors.