A primer for using transgenic insecticidal cotton in developing countries

Transgenic Improvement for Biotic Resistance of Crops

Biotic constraints, including pathogenic fungi, viruses and bacteria, herbivory insects, as well as parasitic nematodes, cause significant yield loss and quality deterioration of crops. The effect of conventional management of these biotic constraints is limited. The advances in transgenic technologies provide a direct and directional approach to improve crops for biotic resistance. More than a hundred transgenic events and hundreds of cultivars resistant to herbivory insects, pathogenic viruses, and fungi have been developed by the heterologous expression of exogenous genes and RNAi, authorized for cultivation and market, and resulted in a significant reduction in yield loss and quality deterioration. However, the exploration of transgenic improvement for resistance to bacteria and nematodes by overexpression of endogenous genes and RNAi remains at the testing stage. Recent advances in RNAi and CRISPR/Cas technologies open up possibilities to improve the resistance of crops to pathogenic bacteria and plant parasitic nematodes, as well as other biotic constraints.

Three strategies of transgenic manipulation for crop improvement

Heterologous expression of exogenous genes, overexpression of endogenous genes, and suppressed expression of undesirable genes are the three strategies of transgenic manipulation for crop improvement. Up to 2020, most (227) of the singular transgenic events (265) of crops approved for commercial release worldwide have been developed by the first strategy. Thirty-eight of them have been transformed by synthetic sequences transcribing antisense or double-stranded RNAs and three by mutated copies for suppressed expression of undesirable genes (the third strategy). By the first and the third strategies, hundreds of transgenic events and thousands of varieties with significant improvement of resistance to herbicides and pesticides, as well as nutritional quality, have been developed and approved for commercial release. Their application has significantly decreased the use of synthetic pesticides and the cost of crop production and increased the yield of crops and the benefits to farmers. However, almost all the events overexpressing endogenous genes remain at the testing stage, except one for fertility restoration and another for pyramiding herbicide tolerance. The novel functions conferred by the heterologously expressing exogenous genes under the control of constitutive promoters are usually absent in the recipient crops themselves or perform in different pathways. However, the endogenous proteins encoded by the overexpressing endogenous genes are regulated in complex networks with functionally redundant and replaceable pathways and are difficult to confer the desirable phenotypes significantly. It is concluded that heterologous expression of exogenous genes and suppressed expression by RNA interference and clustered regularly interspaced short palindromic repeats-cas (CRISPR/Cas) of undesirable genes are superior to the overexpression of endogenous genes for transgenic improvement of crops.

Advances and Perspectives of Transgenic Technology and Biotechnological Application in Forest Trees

Transgenic technology is increasingly used in forest-tree breeding to overcome the disadvantages of traditional breeding methods, such as a long breeding cycle, complex cultivation environment, and complicated procedures. By introducing exogenous DNA, genes tightly related or contributed to ideal traits-including insect, disease, and herbicide resistance-were transferred into diverse forest trees, and genetically modified (GM) trees including poplars were cultivated. It is beneficial to develop new varieties of GM trees of high quality and promote the genetic improvement of forests. However, the low transformation efficiency has hampered the cultivation of GM trees and the identification of the molecular genetic mechanism in forest trees compared to annual herbaceous plants such as Oryza sativa. In this study, we reviewed advances in transgenic technology of forest trees, including the principles, advantages and disadvantages of diverse genetic transformation methods, and their application for trait improvement. The review provides insight into the establishment and improvement of genetic transformation systems for forest tree species. Challenges and perspectives pertaining to the genetic transformation of forest trees are also discussed.

Location of Helicoverpa zea (Lepidoptera: Noctuidae) larvae on different plant parts of determinate and indeterminate soybean

Helicoverpa zea (Boddie) is a damaging pest of many crops including soybean, Glycine max (L.), especially in the southern United States. Previous studies have concluded that oviposition and development of H. zea larvae mirror the phenology of soybean, with oviposition occurring during full bloom, younger larvae developing on blooms and leaves, intermediate aged larvae developing on varying tissue types, and older larvae developing on flowers and pods. In a field trial, we investigated the presence of natural infestations of H. zea larvae by instar in determinate and indeterminate soybean varieties. In complementary experiments, we artificially infested H. zea and allowed them to oviposit on plants within replicated cages (one with a determinate variety and two with an indeterminate variety). Plants were sampled weekly during the time larvae were present. In the natural infestation experiment, most larvae were found on blooms during R3 and were early to middle instars; by R4, most larvae were found on leaves and were middle to late instars. In contrast, in the cage study, most larvae were found on leaves regardless of soybean growth stage or larval stage. Determinate and indeterminate growth habit did not impact larval preference for different soybean tissue types. Our studies suggest H. zea larvae prefer specific tissue types, but also provide evidence that experimental design can influence the results. Finally, our finding of larval preference for leaves contrasts with findings from previous studies.

Seasonal Declines in Cry1Ac and Cry2Ab Concentration in Maturing Cotton Favor Faster Evolution of Resistance to Pyramided Bt Cotton in Helicoverpa zea (Lepidoptera: Noctuidae)

Under ideal conditions, widely adopted transgenic crop pyramids producing two or more distinct insecticidal proteins from Bacillus thuringiensis (Bt) that kill the same pest can substantially delay evolution of resistance by pests. However, deviations from ideal conditions diminish the advantages of such pyramids. Here, we tested the hypothesis that changes in maturing cotton producing Cry1Ac and Cry2Ab affect evolution of resistance in Helicoverpa zea (Boddie) (Lepidoptera: Noctuidae), a pest with low inherent susceptibility to both toxins. In terminal leaves of field-grown Bt cotton, the concentration of both toxins was significantly higher for young, squaring plants than for old, fruiting plants. We used laboratory bioassays with plant material from field-grown cotton to test H. zea larvae from a strain selected for resistance to Cry1Ac in the laboratory, its more susceptible parent strain, and their F1 progeny. On young Bt cotton, no individuals survived to pupation. On old Bt cotton, survival to pupation was significantly higher for the lab-selected strain and the F1 progeny relative to the unselected parent strain, indicating dominant inheritance of resistance. Redundant killing, the extent to which insects resistant to one toxin are killed by another toxin in a pyramid, was complete on young Bt cotton, but not on old Bt cotton. No significant fitness costs associated with resistance were detected on young or old non-Bt cotton. Incorporation of empirical data into simulations indicates the observed increased selection for resistance on old Bt cotton could accelerate evolution of resistance to cotton producing Cry1Ac and Cry2Ab in H. zea.

Helicoverpa zea (Lepidoptera: Noctuidae) Preference for Plant Structures, and Their Location, Within Bt Cotton Under Different Nitrogen and Irrigation Regimes

Helicoverpa zea Boddie is a common economic pest of cotton (Gossypium hirsutum L.), including transgenic cotton varieties that express Bacillus thuringiensis (Bt). Helicoverpa zea oviposition is similar in Bt and non-Bt cotton, but behavior of H. zea larvae can be different in the presence of Bt, with neonates moving away from terminals faster in single-toxin Bt than non-Bt cotton or avoiding Bt-treated diet in the lab. We quantified H. zea oviposition and larval distribution on structures within cotton plants in small plot experiments of Cry1Ac + Cry1F cotton for 2 yr under different irrigation and nitrogen treatments. More eggs were oviposited on plants receiving nitrogen application during 2016 and on leaves in the top section of irrigated plants during 2017, but other treatment effects on eggs or larvae were minimal. Helicoverpa zea eggs were most common on leaves in the top third of plants at position zero and middle section of cotton plants throughout the season, but some oviposition occurred on fruiting structures as well. First and second instars were more common on squares in the top section of plants during 2016 and bolls in the middle and lower sections during 2017 due to oviposition lower in the canopy during 2017. During both years, third through fifth instars were more common on bolls in the middle and lower section of plants closer to the main stem. These findings have resistance management implications as extended larval feeding on bolls could optimize nutrition, decrease Bt susceptibility, and potentially influence behavioral resistance.

Helicoverpa zea (Lepidoptera: Noctuidae) Oviposition and Larval Vertical Distribution in Bt Cotton Under Different Levels of Nitrogen and Irrigation

In some Bt cotton (Gossypium hirsutum L.) varieties, bollworm (Helicoverpa zea Boddie) larval behavior differs from non-Bt varieties. Laboratory assays indicate bollworm larvae can detect Bt proteins, which may cause behavioral differences. Plant stress from factors including fertility and water availability causes changes in plant physiology and Bt expression. Our objective was to determine whether nitrogen and irrigation influenced bollworm behavior in Bt cotton by recording the vertical distribution of eggs and larvae over time. We conducted small plot experiments with Cry1Ac + Cry1F cotton in 2016 and 2017 with three nitrogen rates, along with irrigated and nonirrigated treatments during 2017. Bollworm locations were determined by in-field examination of 10-20 cotton plants per plot over 6-8 wk. The location of each egg and larva was recorded by node, with instar estimation of each larva. Oviposition was higher in in plots receiving nitrogen; first and second instars were also more common in plots receiving nitrogen or irrigation, whereas older instars had similar numbers among treatments. Oviposition was more evenly distributed throughout the canopy earlier in the sampling period than during later weeks, with more eggs in the top third of the canopy in only three of 14-wk. Early instars were also evenly distributed throughout the canopy. Later, instars moved to the middle portions of the canopy, away from bottom nodes, and did not move toward the terminal. Understanding bollworm behavior can inform both crop scouting and resistance management decisions.

Pollen Tube Pathway-Mediated Cotton Transformation

Although many gene transfer methods have been employed for successfully obtaining transgenic cotton, the major constraint in cotton improvement is the limitation of genotype because the majority of transgenic methods require plant regeneration from a single transformed cell which is limited by cotton tissue culture. Comparing with other plant species, it is difficult to induce plant regeneration from cotton; currently, only a limited number of cotton cultivars can be cultured for obtaining regenerated plants. Thus, developing a simple and genotype-independent genetic transformation method is particularly interested for cotton. In this chapter, we present a simple, cost-efficient, and genotype-independent cotton transformation method - pollen tube pathway-mediated transformation. This method uses pollen tube pathway to deliver transgene into cotton embryo sacs and then insert foreign genes into cotton genome. There are three major steps for pollen tube pathway-mediated genetic transformation, which include injection of foreign genes into pollen tube, integration of foreign genes into plant genome, and selection of transgenic plants.

A Simple and Rapid Method for Determining Transgenic Cotton Plants Using a Marker Gene

Determining transgenic events is a critical step for obtaining transgenic plants as well as the later stage of application. Traditional methods, such as Northern blotting and qRT-PCR, for determining transgenic events require radioactively labeled substrates, expensive instruments, or long-time commitments, which results in lab and time-consuming as well as expensive costs. Those methods also require destroying the transgenic events. In this chapter, we present a simple and rapid method for determining transgenic cotton plants in both laboratory and field conditions. This method is based on the sensitivity of transgenic and non-transgenic plants to a specific chemical, such as antibiotics or herbicides. This method will facilitate the screening of transgenic events, save time, reduce cost, and speed up the application of transgenic technology on cotton breeding and production. More importantly, this is a nondestructive bioassay method; the transgenic plants can be transferred into greenhouse or field for the later study after the detection process.

Determining Pollen-Mediated Gene Flow in Transgenic Cotton

Gene flow is one of the major concerns associated with the release of transgenic plants into the environment. Unrestricted gene flow can results in super weeds, reduction in species fitness and genetic diversity, and contamination of traditional plants and foods. Thus, it is important and also necessary to evaluate the extent of gene flow in the field for transgenic plants already released or being considered for a release. Transgenic cotton is among the first transgenic crops for commercialization, which are widely cultivated around the world. In this chapter, we use transgenic insect-resistant cotton and herbicide-tolerant cotton as two examples to present a field practice method for determining transgene flow in cotton. The procedure includes three major sections: (1) field design, (2) seed collection, and (3) field and lab bioassay.

Levels of DNA methylation and transcript accumulation in leaves of transgenic maize varieties

BACKGROUND

Prior to their release in the environment, transgenic crops are examined for their health and environmental safety. In addition, transgene expression needs to be consistent in order to express the introduced trait (e.g. insecticidal and/or herbicide tolerance). Moreover, data on expression levels for GM events are usually required for approval, but these are rarely disclosed or they are considered insufficient. On the other hand, biosafety regulators do not consider epigenetic regulation (e.g. DNA methylation, ncRNAs and histone modifications), which are broadly known to affect gene expression, within their risk assessment analyses. Here we report the results of a DNA methylation (bisulfite sequencing) and transgene transcript accumulation (RT-qPCR) analysis of four Bt-expressing single transgenic maize hybrids, under different genetic backgrounds, and a stacked transgenic hybrid expressing both insecticidal and herbicide tolerance traits.

RESULTS

Our results showed differences in cytosine methylation levels in the FMV promoter and cry2Ab2 transgene of the four Bt-expressing hybrid varieties. The comparison between single and stacked hybrids under the same genetic background showed differences in the 35S promoter sequence. The results of transgene transcript accumulation levels showed differences in both cry1A.105 and cry2Ab2 transgenes among the four Bt-expressing hybrid varieties. The comparison between single and stacked hybrids showed difference for the cry2Ab2 transgene only.

CONCLUSIONS

Overall, our results show differences in DNA methylation patterns in all varieties, as well as in transgene transcript accumulation levels. Although the detection of changes in DNA methylation and transgenic accumulation levels does not present a safety issue per se, it demonstrates the need for additional studies that focus on detecting possible safety implications of such changes.

The presence of Bt-transgenic oilseed rape in wild mustard populations affects plant growth

The adventitious presence of transgenic plants in wild plant populations is of ecological and regulatory concern, but the consequences of adventitious presence are not well understood. Here, we introduced Bacillus thuringiensis Cry1Ac (Bt)-transgenic oilseed rape (Bt OSR, Brassica napus) with various frequencies into wild mustard (Brassica juncea) populations. We sought to better understand the adventitious presence of this transgenic insecticidal crop in a wild-relative plant population. We assessed the factors of competition, resource availability and diamondback moth (Plutella xylostella) infestation on plant population dynamics. As expected, Bt OSR performed better than wild mustard in mixed populations under herbivore attack in habitats with enough resources, whereas wild mustard had higher fitness when Bt OSR was rarer in habitats with limited resources. Results suggest that the presence of insect-resistant transgenic plants could decrease the growth of wild mustard and Bt OSR plants and their populations, especially under high herbivore pressure.

The impact of secondary pests on Bacillus thuringiensis (Bt) crops

The intensification of agriculture and the development of synthetic insecticides enabled worldwide grain production to more than double in the last third of the 20th century. However, the heavy dependence and, in some cases, overuse of insecticides has been responsible for negative environmental and ecological impacts across the globe, such as a reduction in biodiversity, insect resistance to insecticides, negative effects on nontarget species (e.g. natural enemies) and the development of secondary pests. The use of recombinant DNA technology to develop genetically engineered insect-resistant crops could mitigate many of the negative side effects of insecticides. One such genetic alteration enables crops to express toxic crystalline (Cry) proteins from the soil bacteria Bacillus thuringiensis (Bt). Despite the widespread adoption of Bt crops, there are still a range of unanswered questions concerning longer term agro-ecosystem interactions. For instance, insect species that are not susceptible to the expressed toxin can develop into secondary pests and cause significant damage to the crop. Here, we review the main causes surrounding secondary pest dynamics in Bt crops and the impact of such outbreaks. Regardless of the causes, if nonsusceptible secondary pest populations exceed economic thresholds, insecticide spraying could become the immediate solution at farmers' disposal, and the sustainable use of this genetic modification technology may be in jeopardy. Based on the literature, recommendations for future research are outlined that will help to improve the knowledge of the possible long-term ecological trophic interactions of employing this technology.

Effect of stacking insecticidal cry and herbicide tolerance epsps transgenes on transgenic maize proteome

BACKGROUND

The safe use of stacked transgenic crops in agriculture requires their environmental and health risk assessment, through which unintended adverse effects are examined prior to their release in the environment. Molecular profiling techniques can be considered useful tools to address emerging biosafety gaps. Here we report the first results of a proteomic profiling coupled to transgene transcript expression analysis of a stacked commercial maize hybrid containing insecticidal and herbicide tolerant traits in comparison to the single event hybrids in the same genetic background.

RESULTS

Our results show that stacked genetically modified (GM) genotypes were clustered together and distant from other genotypes analyzed by PCA. Twenty-two proteins were shown to be differentially modulated in stacked and single GM events versus non-GM isogenic maize and a landrace variety with Brazilian genetic background. Enrichment analysis of these proteins provided insight into two major metabolic pathway alterations: energy/carbohydrate and detoxification metabolism. Furthermore, stacked transgene transcript levels had a significant reduction of about 34% when compared to single event hybrid varieties.

CONCLUSIONS

Stacking two transgenic inserts into the genome of one GM maize hybrid variety may impact the overall expression of endogenous genes. Observed protein changes differ significantly from those of single event lines and a conventional counterpart. Some of the protein modulation did not fall within the range of the natural variability for the landrace used in this study. Higher expression levels of proteins related to the energy/carbohydrate metabolism suggest that the energetic homeostasis in stacked versus single event hybrid varieties also differ. Upcoming global databases on outputs from "omics" analyses could provide a highly desirable benchmark for the safety assessment of stacked transgenic crop events. Accordingly, further studies should be conducted in order to address the biological relevance and implications of such changes.

Potential shortfall of pyramided transgenic cotton for insect resistance management

To delay evolution of pest resistance to transgenic crops producing insecticidal proteins from Bacillus thuringiensis (Bt), the "pyramid" strategy uses plants that produce two or more toxins that kill the same pest. In the United States, this strategy has been adopted widely, with two-toxin Bt cotton replacing one-toxin Bt cotton. Although two-toxin plants are likely to be more durable than one-toxin plants, the extent of this advantage depends on several conditions. One key assumption favoring success of two-toxin plants is that they kill insects selected for resistance to one toxin, which is called "redundant killing." Here we tested this assumption for a major pest, Helicoverpa zea, on transgenic cotton producing Bt toxins Cry1Ac and Cry2Ab. Selection with Cry1Ac increased survival on two-toxin cotton, which contradicts the assumption. The concentration of Cry1Ac and Cry2Ab declined during the growing season, which would tend to exacerbate this problem. Furthermore, analysis of results from 21 selection experiments with eight species of lepidopteran pests indicates that some cross-resistance typically occurs between Cry1A and Cry2A toxins. Incorporation of empirical data into simulation models shows that the observed deviations from ideal conditions could greatly reduce the benefits of the pyramid strategy for pests like H. zea, which have inherently low susceptibility to Bt toxins and have been exposed extensively to one of the toxins in the pyramid before two-toxin plants are adopted. For such pests, the pyramid strategy could be improved by incorporating empirical data on deviations from ideal assumptions about redundant killing and cross-resistance.

Determining gene flow in transgenic cotton

Gene flow is one of the major concerns associated with the release of transgenic plants into the environment. Unrestricted gene flow can results in super weeds, reduction in species fitness and genetic diversity, and contamination of traditional plants and foods. Thus, it is important and also necessary to evaluate the extent of gene flow in the field for transgenic plants already released or being considered for a release. Transgenic cotton is among the first transgenic crops for commercialization, which are widely cultivated around the world. In this chapter, we use transgenic insect resistant cotton and herbicide-tolerant cotton as two examples to present a field practice method for determining transgene flow in cotton. The procedure includes three major sections: (1) field design, (2) seed collection, and (3) field and lab bioassay.

A simple and rapid method for determining transgenic cotton plants

Determining transgenic events is a critical step for obtaining transgenic plants as well as the later stage of application. Traditional methods, such as Northern blotting and qRT-PCR, for determining transgenic events either require radioactively labeled substrates, expensive instruments, or long-time commitments, which result in lab and time-consuming as well as expensive costs. These methods also require destroying the transgenic events. In this chapter, we present a simple and rapid method for determining transgenic cotton plants in both laboratory and field conditions. This method is based on the sensitivity of transgenic and non-transgenic plants to a specific chemical, such as antibiotics or herbicides. This method will facilitate the screening of transgenic events, save time, reduce cost, and speed up the application of transgenic technology on cotton breeding and production. More important, this is a nondestructive bioassay method; the transgenic plants can be transferred into greenhouse or field for the later study after the detection process.

Cotton transformation via pollen tube pathway

Although many gene transfer methods have been employed for successfully obtaining transgenic cotton, the major constraint in cotton improvement is the limitation of genotype because the majority of transgenic methods require plant regeneration from a single transformed cell which is limited by cotton tissue culture. Comparing with other plant species, it is difficult to induce plant regeneration from cotton; currently, only a limited number of cotton cultivars can be cultured for obtaining regenerated plants. Thus, development of a simple and genotype-independent genetic transformation method is particularly important for cotton community. In this chapter, we present a simple, cost-efficient, and genotype-independent cotton transformation method-pollen tube pathway-mediated transformation. This method uses pollen tube pathway to deliver transgene into cotton embryo sacs and then insert foreign genes into cotton genome. There are three major steps for pollen tube pathway-mediated genetic transformation, which include injection of -foreign genes into pollen tube, integration of foreign genes into plant genome, and selection of transgenic plants.

Assessing the role of non-cotton refuges in delaying Helicoverpa armigera resistance to Bt cotton in West Africa

Non-cotton host plants without Bacillus thuringiensis (Bt) toxins can provide refuges that delay resistance to Bt cotton in polyphagous insect pests. It has proven difficult, however, to determine the effective contribution of such refuges and their role in delaying resistance evolution. Here, we used biogeochemical markers to quantify movement of Helicoverpa armigera moths from non-cotton hosts to cotton fields in three agricultural landscapes of the West African cotton belt (Cameroon) where Bt cotton was absent. We show that the contribution of non-cotton hosts as a source of moths was spatially and temporally variable, but at least equivalent to a 7.5% sprayed refuge of non-Bt cotton. Simulation models incorporating H. armigera biological parameters, however, indicate that planting non-Bt cotton refuges may be needed to significantly delay resistance to cotton producing the toxins Cry1Ac and Cry2Ab. Specifically, when the concentration of one toxin (here Cry1Ac) declined seasonally, resistance to Bt cotton often occurred rapidly in simulations where refuges of non-Bt cotton were rare and resistance to Cry2Ab was non-recessive, because resistance was essentially driven by one toxin (here Cry2Ab). The use of biogeochemical markers to quantify insect movement can provide a valuable tool to evaluate the role of non-cotton refuges in delaying the evolution of H. armigera resistance to Bt cotton.

Insecticide use and competition shape the genetic diversity of the aphid Aphis gossypii in a cotton-growing landscape

Field populations of the cotton aphid, Aphis gossypii Glover, are structured into geographically widespread host races. In the cotton-producing regions of West and Central Africa (WCA), two genotypes have been repeatedly detected within the cotton host race, one of which (Burk1) is prevalent (>90%) and resistant to several insecticides, as opposed to the second one (Ivo). Here, we conducted whole plant and field cage experiments to test hypotheses for such low genetic diversity, including selection from insecticide treatments, interclonal competition and adaptation to host plant, or climatic conditions. To assess the genetic diversity of immigrant aphids, alatae were trapped and collected on cotton and relay host plants (okra and roselle) in the early cropping season. Individuals were genotyped at eight specific microsatellite loci and characterized by a multilocus genotype (MLG). When independently transferred from cotton (Gossypium hirustum L.) leaf discs to whole plants (G. hirsutum and G. arboreum, roselle and okra), Ivo and Burk1 performed equally well. When concurrently transferred from cotton leaf discs to the same plant species, Ivo performed better than Burk1, indicating that competition favoured Ivo. This was also the case on G. hirsutum growing outdoors. Conversely, Burk1 prevailed when cotton plants were sprayed with insecticides. In experiments where aphids were allowed to move to neighbouring plants, Burk1 was better represented than Ivo on low-populated plants, suggesting that dispersal may be a way to avoid competition on crowded plants. Most cotton aphids collected on cotton or relay host plants in the early cropping season were Burk1 (>90%), indicating high dispersal ability and, probably reflecting high frequency on host plants from which they dispersed. In the agricultural landscape of WCA, the use of broad-range insecticides on both cotton and relay host plants has led to the prevalence of one genotype of A. gossypii resistant to different classes of insecticides. Deployment of widespread and integrated pest management strategies are needed to restore cotton aphid control.

Tobacco plants expressing the Cry1AbMod toxin suppress tolerance to Cry1Ab toxin of Manduca sexta cadherin-silenced larvae

Cry toxins produced by Bacillus thuringiensis bacteria are insecticidal proteins used worldwide in the control of different insect pests. Alterations in toxin-receptor interaction represent the most common mechanism to induce resistance to Cry toxins in lepidopteran insects. Cry toxins bind with high affinity to the cadherin protein present in the midgut cells and this interaction facilitates the proteolytic removal of helix α-1 and pre-pore oligomer formation. Resistance to Cry toxins has been linked with mutations in the cadherin gene. One strategy effective to overcome larval resistance to Cry1A toxins is the production of Cry1AMod toxins that lack helix α-1. Cry1AMod are able to form oligomeric structures without binding to cadherin receptor and were shown to be toxic to cadherin-silenced Manduca sexta larvae and Pectinophora gossypiella strain with resistance linked to mutations in a cadherin gene. We developed Cry1AbMod tobacco transgenic plants to analyze if Cry1AMod toxins can be expressed in transgenic crops, do not affect plant development and are able to control insect pests. Our results show that production of the Cry1AbMod toxin in transgenic plants does not affect plant development, since these plants exhibited healthy growth, produced abundant seeds, and were virtually undistinguishable from control plants. Most importantly, Cry1AbMod protein produced in tobacco plants retains its functional toxic activity against susceptible and tolerant M. sexta larvae due to the silencing of cadherin receptor by RNAi. These results suggest that CryMod toxins could potentially be expressed in other transgenic crops to protect them against both toxin-susceptible and resistant lepidopteran larvae affected in cadherin gene.

Pollen- and seed-mediated transgene flow in commercial cotton seed production fields

Background

Characterizing the spatial patterns of gene flow from transgenic crops is challenging, making it difficult to design containment strategies for markets that regulate the adventitious presence of transgenes. Insecticidal Bacillus thuringiensis (Bt) cotton is planted on millions of hectares annually and is a potential source of transgene flow.

Methodology/Principal Findings

Here we monitored 15 non-Bt cotton (Gossypium hirsutum, L.) seed production fields (some transgenic for herbicide resistance, some not) for gene flow of the Bt cotton cry1Ac transgene. We investigated seed-mediated gene flow, which yields adventitious Bt cotton plants, and pollen-mediated gene flow, which generates outcrossed seeds. A spatially-explicit statistical analysis was used to quantify the effects of nearby Bt and non-Bt cotton fields at various spatial scales, along with the effects of pollinator abundance and adventitious Bt plants in fields, on pollen-mediated gene flow. Adventitious Bt cotton plants, resulting from seed bags and planting error, comprised over 15% of plants sampled from the edges of three seed production fields. In contrast, pollen-mediated gene flow affected less than 1% of the seed sampled from field edges. Variation in outcrossing was better explained by the area of Bt cotton fields within 750 m of the seed production fields than by the area of Bt cotton within larger or smaller spatial scales. Variation in outcrossing was also positively associated with the abundance of honey bees.

Conclusions/Significance

A comparison of statistical methods showed that our spatially-explicit analysis was more powerful for understanding the effects of surrounding fields than customary models based on distance. Given the low rates of pollen-mediated gene flow observed in this study, we conclude that careful planting and screening of seeds could be more important than field spacing for limiting gene flow.

The Anthropology of Genetically Modified Crops

By late in the twentieth century, scientists had succeeded in manipulating organisms at the genetic level, mainly by gene transfer. The major impact of this technology has been seen in the spread of genetically modified (GM) crops, which has occurred with little controversy in some areas and with fierce controversy elsewhere. GM crops raise a very wide range of questions, and I address three areas of particular interest for anthropology and its allied fields. First are the political-economic aspects of GM, which include patenting of life forms and new relationships among agriculture, industry, and the academy. Second is the wide diversity in response and resistance to the technology. Third is the much-debated question of GM crops for the developing world. This analysis is approached first by determining what controls research agendas and then by evaluating actual impacts of crops to date.

Evolutionary ecology of insect adaptation to Bt crops

Transgenic crops producing Bacillus thuringiensis (Bt) toxins are used worldwide to control major pests of corn and cotton. Development of strategies to delay the evolution of pest resistance to Bt crops requires an understanding of factors affecting responses to natural selection, which include variation in survival on Bt crops, heritability of resistance, and fitness advantages associated with resistance mutations. The two main strategies adopted for delaying resistance are the refuge and pyramid strategies. Both can reduce heritability of resistance, but pyramids can also delay resistance by reducing genetic variation for resistance. Seasonal declines in the concentration of Bt toxins in transgenic cultivars, however, can increase the heritability of resistance. The fitness advantages associated with resistance mutations can be reduced by agronomic practices, including increasing refuge size, manipulating refuges to increase fitness costs, and manipulating Bt cultivars to reduce fitness of resistant individuals. Manipulating costs and fitness of resistant individuals on transgenic insecticidal crops may be especially important for thwarting evolution of resistance in haplodiploid and parthenogenetic pests. Field-evolved resistance to Bt crops in only five pests during the last 14 years suggests that the refuge strategy has successfully delayed resistance, but the accumulation of resistant pests could accelerate.

Comparing the refuge strategy for managing the evolution of insect resistance under different reproductive strategies

Genetically modified (GM) crops are used extensively worldwide to control diploid agricultural insect pests that reproduce sexually. However, future GM crops will likely soon target haplodiploid and parthenogenetic insects. As rapid pest adaptation could compromise these novel crops, strategies to manage resistance in haplodiploid and parthenogenetic pests are urgently needed. Here, we developed models to characterize factors that could delay or prevent the evolution of resistance to GM crops in diploid, haplodiploid, and parthenogenetic insect pests. The standard strategy for managing resistance in diploid pests relies on refuges of non-GM host plants and GM crops that produce high toxin concentrations. Although the tenets of the standard refuge strategy apply to all pests, this strategy does not greatly delay the evolution of resistance in haplodiploid or parthenogenetic pests. Two additional factors are needed to effectively delay or prevent the evolution of resistance in such pests, large recessive or smaller non-recessive fitness costs must reduce the fitness of resistance individuals in refuges (and ideally also on GM crops), and resistant individuals must have lower fitness on GM compared to non-GM crops (incomplete resistance). Recent research indicates that the magnitude and dominance of fitness costs could be increased by using specific host-plants, natural enemies, or pathogens. Furthermore, incomplete resistance could be enhanced by engineering desirable traits into novel GM crops. Thus, the sustainability of GM crops that target haplodiploid or parthenogenetic pests will require careful consideration of the effects of reproductive mode, fitness costs, and incomplete resistance.

Fitness costs of insect resistance to Bacillus thuringiensis

Evolution of resistance by insect pests threatens the continued effectiveness of Bacillus thuringiensis (Bt) toxins in sprays and transgenic crops. Fitness costs of Bt resistance occur when, in the absence of Bt toxins, fitness is lower for resistant insects than for susceptible insects. Modeling results show that fitness costs can delay resistance by selecting against Bt-resistant genotypes in refuges where insects are not exposed to Bt toxins. In 77 studies including 18 species, fitness costs were detected in 62% of experiments testing for declines in resistance and in 34% of fitness component comparisons. Mean fitness costs were 15.5% for survival, 7.4% for development time, and 2.5% for mass. Although most fitness costs were recessive, nonrecessive costs can select more strongly against resistance. Because fitness costs vary with ecological conditions, refuges designed to increase the dominance or magnitude of fitness costs could be especially useful for delaying pest resistance.