Adhesion of Candida spp. and Pichia spp. to Wooden Surfaces

Candida species contamination in drinking groundwater from residence wells in three municipalities of midwestern Brazil and the potential human health risks

Groundwater represents one of the largest safe drinking water sources worldwide; however, it has been threatened by increased human activities in recent years. Candida species express virulence factors that contribute to the establishment and worsening of infections, although little is known about the virulence profiles of these species in potable groundwater. The aim of this study was to detect the presence of yeasts in groundwater from residential wells and to evaluate the antifungal susceptibility profile, hydrolytic enzyme production, adhesion capacity, and biofilm formation of Candida spp. Fifty yeasts representing nine genera were isolated: Candida (48%), Meyerozyma (20%), Pichia (8%), Exophiala (8%), Clavispora (4%), Kodamaea (4%), Rhodotorula (4%), Hanseniaspora (2%), and Kazachstania (2%). Candida parapsilosis was the most commonly isolated species, and approximately 29% of the Candida isolates were resistant to at least one azole. All Candida isolates were able to produce hydrolytic enzymes and adhere to polystyrene, and most were classified as hydrophobic. Candida spp. can establish and form biofilms when cultivated in different media such as Sabouraud broth, water, and calcium hypochlorite. The use of contaminated groundwater for human consumption represents a possible route for the transmission of clinically relevant yeasts that can cause fungal infections, especially in immunocompromised individuals. Therefore, it is important to evaluate and establish effective measures for groundwater treatment to ensure the quality and safety for consumption.

Promoting Candida zemplinina adhesion on oak chips: A strategy to enhance esters and glycerol content of Montepulciano d'Abruzzo organic wines

In this study cell surface hydrophobicity and the ability to adhere on abiotic surfaces (polystyrene plates, stainless steel and oak chips) of 10 Candida zemplinina strains were assessed. Moreover, the impact of C. zemplinina cells adhered on oak surface on fermentation kinetics and volatile profile of Montepulciano d'Abruzzo organic wines was evaluated. All strains showed a hydrophobic nature with a certain affinity for the apolar solvents tested (hexadecane and decane). In agreement with this data strains were able to adhere on abiotic surfaces in a strain dependent way. On polystyrene plates all strains mainly grew as planktonic cells. On stainless steel surfaces sessile cells ranged from 2.6 Log CFU/mL (SB2) to 4.1 Log CFU/mL (SB8), while on oak chips were about 2 log higher ranging from 4.3 Log CFU/mL (SB8) to 6.1 Log CFU/mL (SB10). Candida zemplinina sessile state resulted in an increase of glycerol (from 6.98 g/L to 11.92 g/L) and esters amount (from 55.47 g/L to 91.5 mg/L), and a reduction of ethanol content (from 14.13% to 9.12% v/v). As for esters, methyl vanillate, ethyl isobutyrate, and ethyl isovalerate were present only when C. zemplinina was adhered on oak chips. This study revealed that changes of concentrations in esters and glycerol content reflected the fermentation bioactivity of yeast cells attached on oak chips. Surface-adhered behaviours should be considered in the improvement of strategies for the development of high-quality organic wines and eventually obtain novel wine styles.

Adhesion Properties, Biofilm Forming Potential, and Susceptibility to Disinfectants of Contaminant Wine Yeasts

In this study, yeasts isolated from filter membranes used for the quality control of bottled wines were identified and tested for their resistance to some cleaning agents and potassium metabisulphite, adhesion to polystyrene and stainless-steel surfaces, and formation of a thin round biofilm, referred to as a MAT. A total of 40 strains were identified by rRNA internal transcribed spacer (ITS) restriction analysis and sequence analysis of D1/D2 domain of 26S rRNA gene. Strains belong to Pichia manshurica (12), Pichia kudriavzevii (9), Pichia membranifaciens (1), Candida sojae (6), Candida parapsilosis (3), Candida sonorensis (1), Lodderomyces elongisporus (2), Sporopachydermia lactativora (3), and Clavispora lusitaniae (3) species. Regarding the adhesion properties, differences were observed among species. Yeasts preferred planktonic state when tested on polystyrene plates. On stainless-steel supports, adhered cells reached values of about 6 log CFU/mL. MAT structures were formed only by yeasts belonging to the Pichia genus. Yeast species showed different resistance to sanitizers, with peracetic acid being the most effective and active at low concentrations, with minimum inhibitory concentration (MIC) values ranging from 0.08% (v/v) to 1% (v/v). C. parapsilosis was the most sensible species. Data could be exploited to develop sustainable strategies to reduce wine contamination and establish tailored sanitizing procedures.

Influence of growth conditions on adhesion of yeast Candida spp. and Pichia spp. to stainless steel surfaces

An understanding of adhesion behavior of Candida and Pichia yeast under different environmental conditions is key to the development of effective preventive measures against biofilm-associated infection. Hence in this study we investigated the impact of growth medium and temperature on Candida and Pichia adherence using stainless steel (AISI 304) discs with different degrees of surface roughness (Ra = 25.20-961.9 nm), material typical for the food processing industry as well as medical devices. The adhesion of the yeast strains to stainless steel surfaces grown in Malt Extract broth (MEB) or YPD broth at three temperatures (7 °C, 37 °C, 43 °C for Candida strains and 7 °C, 27 °C, 32 °C for Pichia strains) was assessed by crystal violet staining. The results showed that the nutrient content of medium significantly influenced the quantity of adhered cells by the tested yeasts. Adhesion of C. albicans and C. glabrata on stainless steel surfaces were significantly higher in MEB, whereas for C. parapsilosis and C. krusei it was YPD broth. In the case with P. pijperi and P. membranifaciens, YPD broth was more effective in promoting adhesion than MEB. On the other hand, our data indicated that temperature is a very important factor which considerably affects the adhesion of these yeast. There was also significant difference in cell adhesion on all types of stainless steel surfaces for all tested yeast.