3D Printed Zn-doped Mesoporous Silica-incorporated Poly-L-lactic Acid Scaffolds for Bone Repair

Promoting neurovascularized bone regeneration with a novel 3D printed inorganic-organic magnesium silicate/PLA composite scaffold

Critical-size bone defect repair presents multiple challenges, such as osteogenesis, vascularization, and neurogenesis. Current biomaterials for bone repair need more consideration for the above functions. Organic-inorganic composites combined with bioactive ions offer significant advantages in bone regeneration. In our work, we prepared an organic-inorganic composite material by blending polylactic acid (PLA) with 3-aminopropyltriethoxysilane (APTES)-modified magnesium silicate (A-M2S) and fabricated it by 3D printing. With the increase of A-M2S proportion, the hydrophilicity and mineralization ability showed an enhanced trend, and the compressive strength and elastic modulus were increased from 15.29 MPa and 94.61 MPa to 44.30 MPa and 435.77 MPa, respectively. Furthermore, A-M2S/PLA scaffolds not only exhibited good cytocompatibility of bone marrow mesenchymal stem cells (BMSCs), human umbilical vein endothelial cells (HUVECs), and Schwann cells (SCs), but also effectively promoted osteogenesis, angiogenesis, and neurogenesis in vitro. After implanting 10% A-M2S/PLA scaffolds in vivo, the scaffolds showed the most effective repair of cranium defects compared to the blank and control group (PLA). Additionally, they promoted the secretion of proteins related to bone regeneration and neurovascular formation. These results provided the basis for expanding the application of A-M2S and PLA in bone tissue engineering and presented a novel concept for neurovascularized bone repair.

Enhancing osteogenesis and angiogenesis functions for Ti-24Nb-4Zr-8Sn scaffolds with methacrylated gelatin and deferoxamine

Repair of large bone defects remains challenge for orthopedic clinical treatment. Porous titanium alloys have been widely fabricated by the additive manufacturing, which possess the elastic modulus close to that of human cortical bone, good osteoconductivity and osteointegration. However, insufficient bone regeneration and vascularization inside the porous titanium scaffolds severely limit their capability for repair of large-size bone defects. Therefore, it is crucially important to improve the osteogenic function and vascularization of the titanium scaffolds. Herein, methacrylated gelatin (GelMA) were incorporated with the porous Ti-24Nb-4Zr-8Sn (Ti2448) scaffolds prepared by the electron beam melting (EBM) method (Ti2448-GelMA). Besides, the deferoxamine (DFO) as an angiogenic agent was doped into the Ti2448-GelMA scaffold (Ti2448-GelMA/DFO), in order to promote vascularization. The results indicate that GelMA can fully infiltrate into the pores of Ti2448 scaffolds with porous cross-linked network (average pore size: 120.2 ± 25.1 μm). Ti2448-GelMA scaffolds facilitated the differentiation of MC3T3-E1 cells by promoting the ALP expression and mineralization, with the amount of calcium contents ∼2.5 times at day 14, compared with the Ti2448 scaffolds. Impressively, the number of vascular meshes for the Ti2448-GelMA/DFO group (∼7.2/mm2) was significantly higher than the control group (∼5.3/mm2) after cultivation for 9 h, demonstrating the excellent angiogenesis ability. The Ti2448-GelMA/DFO scaffolds also exhibited sustained release of DFO, with a cumulative release of 82.3% after 28 days. Therefore, Ti2448-GelMA/DFO scaffolds likely provide a new strategy to improve the osteogenesis and angiogenesis for repair of large bone defects.

Zinc-energized dynamic hydrogel accelerates bone regeneration via potentiating the coupling of angiogenesis and osteogenesis

Insufficient initial vascularization plays a pivotal role in the ineffectiveness of bone biomaterials for treating bone defects. Consequently, enhancing the angiogenic properties of bone repair biomaterials holds immense importance in augmenting the efficacy of bone regeneration. In this context, we have successfully engineered a composite hydrogel capable of promoting vascularization in the process of bone regeneration. To achieve this, the researchers first prepared an aminated bioactive glass containing zinc ions (AZnBg), and hyaluronic acid contains aldehyde groups (HA-CHO). The composite hydrogel was formed by combining AZnBg with gelatin methacryloyl (GelMA) and HA-CHO through Schiff base bonding. This composite hydrogel has good biocompatibility. In addition, the composite hydrogel exhibited significant osteoinductive activity, promoting the activity of ALP, the formation of calcium nodules, and the expression of osteogenic genes. Notably, the hydrogel also promoted umbilical vein endothelial cell migration as well as tube formation by releasing zinc ions. The results of in vivo study demonstrated that implantation of the composite hydrogel in the bone defect of the distal femur of rats could effectively stimulate bone generation and the development of new blood vessels, thus accelerating the bone healing process. In conclusion, the combining zinc-containing bioactive glass with hydrogels can effectively promote bone growth and angiogenesis, making it a viable option for the repair of critical-sized bone defects.

Synergistic effects of calcium silicate/zinc silicate dual compounds andin-situinterconnected pores on promoting bone regeneration of composite scaffolds

Rapid bone regeneration in implants is important for successful transplantation. In this regard, we report the development of calcium silicate/zinc silicate (CS/ZS) dual-compound-incorporated calcium phosphate cement (CPC) scaffolds with a three-dimensional poly (lactic-co-glycolic acid) network that synergistically promote bone regeneration.In vitroresults demonstrated that the incorporation of CS/ZS dual compounds into the CPC significantly promoted the osteogenic differentiation of stem cells compared to the addition of CS or ZS alone. Moreover, the bone-regeneration efficacy of the composite scaffolds was validated by filling in femur condyle defects in rabbits, which showed that the scaffolds with CS and ZS possessed a great bone repair effect, as evidenced by more new bone formation and a faster scaffold biodegradation compared to the scaffold with CS alone.

Chestnut-Inspired Hollow Hydroxyapatite 3D Printing Scaffolds Accelerate Bone Regeneration by Recruiting Calcium Ions and Regulating Inflammation

This study aims to overcome the drawbacks associated with hydroxyapatite (HAP) dense structures after sintering, which often result in undesirable features such as large grain size, reduced porosity, high crystallinity, and low specific surface area. These characteristics hinder osseointegration and limit the clinical applicability of the material. To address these issues, a new method involving the preparation of hollow hydroxyapatite (hHAP) microspheres has been proposed. These microspheres exhibit distinctive traits including weak crystallization, high specific surface area, and increased porosity. The weak crystallization aligns more closely with early mineralization products found in the human body and animals. Moreover, the microspheres' high specific surface area and porosity offer advantages for protein loading and facilitating osteoblast attachment. This innovative approach not only mitigates the limitations of conventional HAP structures but also holds the potential for improving the effectiveness of hydroxyapatite in biomedical applications, particularly in enhancing osseointegration. Three-dimensional printed hHAP/chitosan (CS) scaffolds with different hHAP concentration gradients were manufactured, and the physical and biological properties of each group were systematically evaluated. In vitro and in vivo experiments show that the hHAP/CS scaffold has excellent performance in bone remodeling. Furthermore, in-scaffold components, hHAP and CS were cocultured with bone marrow mesenchymal stem cells to explore the regulatory role of hHAP and CS in the process of bone healing and to reveal the cell-level specific regulatory network activated by hHAP. Enrichment analysis showed that hHAP can promote bone regeneration and reconstruction by recruiting calcium ions and regulating inflammatory reactions.

DLP fabrication of HA scaffold with customized porous structures to regulate immune microenvironment and macrophage polarization for enhancing bone regeneration

The immune microenvironment plays a pivotal role in osteoanagenesis. Biomaterials can modulate osteogenic efficacy by inducing specific local immune reactions. As 3D-printing technology advances, digital light projection printing has emerged as a promising method for creating large scale, high-precision biomaterial scaffolds. By adjusting the solid content and the sintering conditions during printing, the pore size of biomaterials can be meticulously controlled. Yet, the systematic influence of pore size on the immune microenvironment remains uncharted. We fabricated 3D-printed hydroxyapatite bioceramic scaffolds with three distinct pore sizes: 400 μm, 600 μm, and 800 μm. Our study revealed that scaffolds with a pore size of 600 μm promote macrophage M2 polarization, which is achieved by upregulating interferon-beta and HIF-1α production. When these materials were implanted subcutaneously in rats and within rabbit skulls, we observed that the 600 μm scaffolds notably improved the long-term inflammatory response, fostered vascular proliferation, and augmented new bone growth. This research paves the way for innovative therapeutic strategies for treating large segmental bone defects in clinical settings.

Magnetically-actuated microcages for cells entrapment, fabricated by laser direct writing via two photon polymerization

The manipulation of biological materials at cellular level constitutes a sine qua non and provocative research area regarding the development of micro/nano-medicine. In this study, we report on 3D superparamagnetic microcage-like structures that, in conjunction with an externally applied static magnetic field, were highly efficient in entrapping cells. The microcage-like structures were fabricated using Laser Direct Writing via Two-Photon Polymerization (LDW via TPP) of IP-L780 biocompatible photopolymer/iron oxide superparamagnetic nanoparticles (MNPs) composite. The unique properties of LDW via TPP technique enabled the reproduction of the complex architecture of the 3D structures, with a very high accuracy i.e., about 90 nm lateral resolution. 3D hyperspectral microscopy was employed to investigate the structural and compositional characteristics of the microcage-like structures. Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy was used to prove the unique features regarding the morphology and the functionality of the 3D structures seeded with MG-63 osteoblast-like cells. Comparative studies were made on microcage-like structures made of IP-L780 photopolymer alone (i.e., without superparamagnetic properties). We found that the cell-seeded structures made by IP-L780/MNPs composite actuated by static magnetic fields of 1.3 T were 13.66 ± 5.11 folds (p < 0.01) more efficient in terms of cells entrapment than the structures made by IP-L780 photopolymer alone (i.e., that could not be actuated magnetically). The unique 3D architecture of the microcage-like superparamagnetic structures and their actuation by external static magnetic fields acted in synergy for entrapping osteoblast-like cells, showing a significant potential for bone tissue engineering applications.

A spatiotemporal drug release scaffold with antibiosis and bone regeneration for osteomyelitis

INTRODUCTION

Scaffolds loaded with antibacterial agents and osteogenic drugs are considered essential tools for repairing bone defects caused by osteomyelitis. However, the simultaneous release of two drugs leads to premature osteogenesis and subsequent sequestrum formation in the pathological situation of unthorough antibiosis.

OBJECTIVES

In this study, a spatiotemporal drug-release polydopamine-functionalized mesoporous silicon nanoparticle (MSN) core/shell drug delivery system loaded with antibacterial silver (Ag) nanoparticles and osteogenic dexamethasone (Dex) was constructed and introduced into a poly-l-lactic acid (PLLA) scaffold for osteomyelitis therapy.

METHODS

MSNs formed the inner core and were loaded with Dex through electrostatic adsorption (MSNs@Dex), and then polydopamine was used to seal the core through the self-assembly of dopamine as the outer shell (pMSNs@Dex). Ag nanoparticles were embedded in the polydopamine shell via an in situ growth technique. Finally, the Ag-pMSNs@Dex nanoparticles were introduced into PLLA scaffolds (Ag-pMSNs@Dex/PLLA) constructed by selective laser sintering (SLS).

RESULTS

The Ag-pMSNs@Dex/PLLA scaffold released Ag+ at the 12th hour, followed by the release of Dex starting on the fifth day. The experiments verified that the scaffold had excellent antibacterial performance against Escherichia coli and Staphylococcus aureus. Moreover, the scaffold significantly enhanced the osteogenic differentiation of mouse bone marrow mesenchymal stem cells.

CONCLUSION

The findings suggested that this spatiotemporal drug release scaffold had promising potential for osteomyelitis therapy.

Direct osteogenesis and immunomodulation dual function via sustained release of naringin from the polymer scaffold

Many traditional Chinese medicine monomers, such as naringin (NG), can regulate the local immune microenvironment to benefit osteogenesis. However, the rapid release of NG from scaffolds severely influences the osteogenesis-promoting effect. Herein, NG was loaded into mesoporous bioglass (MBG) to achieve sustained release through physical adsorption and the barrier role of mesoporous channels, then MBG loaded with NG was added to poly(L-lactic acid) (PLLA) to fabricate composite scaffolds by selective laser sintering (SLS) technology. The results showed that the NG-MBG/PLLA scaffolds could continuously and slowly release NG for 14 days compared with NG/PLLA scaffolds, and the cumulative release amount for the NG-MBG/PLLA scaffolds was 44.26%. In addition, the NG-MBG/PLLA scaffolds can promote the proliferation and osteogenesis differentiation of mouse bone marrow mesenchymal stem cells (mBMSCs). Meanwhile, the composite scaffolds decreased the reactive oxygen species (ROS) level of RAW264.7 under the stimulation of lipopolysaccharide (LPS) and significantly suppressed interleukin-6 (IL-6) and enhanced arginase-1 (Arg-1) protein expressions. Moreover, calcium nodule and alkaline phosphatase production of mBMSCs in a macrophage-conditioned medium for the NG-MBG/PLLA group also evidently increased compared with the PLLA and MBG/PLLA groups. These NG sustained-release composite scaffolds with osteo-immunomodulation function have great application prospects in the clinic.

Stromal cell-derived factor-1α regulates chondrogenic differentiation via activation of the Wnt/β-catenin pathway in mesenchymal stem cells

BACKGROUND

Mesenchymal stem cells (MSCs) have been applied to treat degenerative articular diseases, and stromal cell-derived factor-1α (SDF-1α) may enhance their therapeutic efficacy. However, the regulatory effects of SDF-1α on cartilage differentiation remain largely unknown. Identifying the specific regulatory effects of SDF-1α on MSCs will provide a useful target for the treatment of degenerative articular diseases.

AIM

To explore the role and mechanism of SDF-1α in cartilage differentiation of MSCs and primary chondrocytes.

METHODS

The expression level of C-X-C chemokine receptor 4 (CXCR4) in MSCs was assessed by immunofluorescence. MSCs treated with SDF-1α were stained for alkaline phosphatase (ALP) and with Alcian blue to observe differentiation. Western blot analysis was used to examine the expression of SRY-box transcription factor 9, aggrecan, collagen II, runt-related transcription factor 2, collagen X, and matrix metalloproteinase (MMP)13 in untreated MSCs, of aggrecan, collagen II, collagen X, and MMP13 in SDF-1α-treated primary chondrocytes, of glycogen synthase kinase 3β (GSK3β) p-GSK3β and β-catenin expression in SDF-1α-treated MSCs, and of aggrecan, collagen X, and MMP13 in SDF-1α-treated MSCs in the presence or absence of ICG-001 (SDF-1α inhibitor).

RESULTS

Immunofluorescence showed CXCR4 expression in the membranes of MSCs. ALP stain was intensified in MSCs treated with SDF-1α for 14 d. The SDF-1α treatment promoted expression of collagen X and MMP13 during cartilage differentiation, whereas it had no effect on the expression of collagen II or aggrecan nor on the formation of cartilage matrix in MSCs. Further, those SDF-1α-mediated effects on MSCs were validated in primary chondrocytes. SDF-1α promoted the expression of p-GSK3β and β-catenin in MSCs. And, finally, inhibition of this pathway by ICG-001 (5 µmol/L) neutralized the SDF-1α-mediated up-regulation of collagen X and MMP13 expression in MSCs.

CONCLUSION

SDF-1α may promote hypertrophic cartilage differentiation in MSCs by activating the Wnt/β-catenin pathway. These findings provide further evidence for the use of MSCs and SDF-1α in the treatment of cartilage degeneration and osteoarthritis.

Improving the osseointegration and soft tissue sealing of zirconia ceramics by the incorporation of akermanite via sol infiltration for dental implants

Zirconia ceramics are promising dental implant materials due to their high-grade biocompatibility, high mechanical strength, and distinctive aesthetic appearance. Nevertheless, zirconia ceramics are bio-inert with a lack of osseointegration and soft tissue sealing, which limits dental implant applications. As such, the fabrication of zirconia ceramics with high mechanical strength, excellent osseointegration and soft tissue sealing performance remains a great challenge in the dental restoration field. In this article, a novel zirconia ceramic with akermanite (AKT) modification by the negative pressure infiltration method is presented. The effects of AKT sol infiltration at different times on the morphology, phase composition, mechanical properties, bioactivity, osseointegration and soft tissue sealing of the modified zirconia ceramics have been systematically investigated. The modified zirconia ceramics feature excellent mechanical properties and significantly improved surface roughness, hydrophilia, and apatite mineralization ability as compared with unmodified zirconia ceramics. Furthermore, cell-culture experiment results indicated that the surface modification of zirconia ceramics could promote adhesion, spreading, migration, proliferation and osteogenic differentiation of mouse bone marrow stromal stem cells (mBMSCs), as well as the early adhesion, spreading, proliferation and fibroblast differentiation of human gingival fibroblasts (HGFs) in vitro. The prepared bioactive zirconia distinctively enhanced the alkaline phosphate (ALP) activity, osteogenesis-related gene expression of mBMSCs and fibroblast-related-gene expression of HGFs. The in vivo evaluation confirmed that 15-TZP ceramics could promote bone-implant osseointegration to the greatest extent as compared with pure zirconia ceramics. To conclude, our research has shown that AKT-modified zirconia ceramics can achieve bone integration and soft tissue sealing, indicating that they have a lot of potential for application as a novel dental implant material in the clinical setting.

Three-Dimensional Printing of Poly-L-Lactic Acid Composite Scaffolds with Enhanced Bioactivity and Controllable Zn Ion Release Capability by Coupling with Carbon-ZnO

Poly-L-lactic acid (PLLA) has gained great popularity with researchers in regenerative medicine owing to its superior biocompatibility and biodegradability, although its inadequate bioactivity inhibits the further use of PLLA in the field of bone regeneration. Zinc oxide (ZnO) has been utilized to improve the biological performance of biopolymers because of its renowned osteogenic activity. However, ZnO nanoparticles tend to agglomerate in the polymer matrix due to high surface energy, which would lead to the burst release of the Zn ion and, thus, cytotoxicity. In this study, to address this problem, carbon–ZnO (C–ZnO) was first synthesized through the carbonization of ZIF-8. Then, C–ZnO was introduced to PLLA powder before it was manufactured as scaffolds (PLLA/C–ZnO) by a selective laser sintering 3D printing technique. The results showed that the PLLA/C–ZnO scaffold was able to continuously release Zn ions in a reasonable range, which can be attributed to the interaction of Zn–N bonding and the shielding action of the PLLA scaffold. The controlled release of Zn ions from the scaffold further facilitated cell adhesion and proliferation and improved the osteogenic differentiation ability at the same time. In addition, C–ZnO endowed the scaffold with favorable photodynamic antibacterial ability, which was manifested by an efficient antibacterial rate of over 95%.

Continuously released Zn2+ in 3D-printed PLGA/β-TCP/Zn scaffolds for bone defect repair by improving osteoinductive and anti-inflammatory properties

Long-term nonunion of bone defects has always been a major problem in orthopedic treatment. Artificial bone graft materials such as Poly (lactic-co-glycolic acid)/β-tricalcium phosphate (PLGA/β-TCP) scaffolds are expected to solve this problem due to their suitable degradation rate and good osteoconductivity. However, insufficient mechanical properties, lack of osteoinductivity and infections after implanted limit its large-scale clinical application. Hence, we proposed a novel bone repair bioscaffold by adding zinc submicron particles to PLGA/β-TCP using low temperature rapid prototyping 3D printing technology. We first screened the scaffolds with 1 wt% Zn that had good biocompatibility and could stably release a safe dose of zinc ions within 16 weeks to ensure long-term non-toxicity. As designed, the scaffold had a multi-level porous structure of biomimetic cancellous bone, and the Young's modulus (63.41 ± 1.89 MPa) and compressive strength (2.887 ± 0.025 MPa) of the scaffold were close to those of cancellous bone. In addition, after a series of in vitro and in vivo experiments, the scaffolds proved to have no adverse effects on the viability of BMSCs and promoted their adhesion and osteogenic differentiation, as well as exhibiting higher osteogenic and anti-inflammatory properties than PLGA/β-TCP scaffold without zinc particles. We also found that this osteogenic and anti-inflammatory effect might be related to Wnt/β-catenin, P38 MAPK and NFkB pathways. This study lay a foundation for the follow-up study of bone regeneration mechanism of Zn-containing biomaterials. We envision that this scaffold may become a new strategy for clinical treatment of bone defects.

Digital Light Processing 3D-Printed Silica Aerogel and as a Versatile Host Framework for High-Performance Functional Nanocomposites

Vat-photopolymerization-based 3D printing enables on-demand construction of customized objects with scalable production capacity and high precision. Herein, the sol-gel process for aerogels with digital light processing 3D printing to produce advanced functional materials possessing hierarchical pore structures and complex shapes is combined. It has revealed the temporal evolution of the photorheological behavior of acrylate-modified silica sols in an acid-base catalytic procedure, and confirmed that silica aerogels can be fabricated with very low acrylate content. The resulting aerogels are thermostable with intrinsic silica contents, skeletal densities, and physical characteristics similar to those of commercial silica aerogels yet distinct mechanical behaviors. More importantly, the printed silica aerogels can be used as a versatile nanoengineering platform to produce high-performance and multifunctional interpenetrating phase nanocomposites with complex shapes through programmable post-printing processes. Epoxy-based nanocomposites possessing excellent mechanical performance, ionogel-based conductive nanocomposites with decoupled electrical and mechanical properties, and anti-swelling hydrogel-based nanocomposites are demonstrated. The results of this study offer new guidelines for the design and fabrication of novel materials by additive manufacturing.

A Codispersed Nanosystem of Silver-anchored MoS2 Enhances Antibacterial and Antitumor Properties of Selective Laser Sintered Scaffolds

Tumor recurrence and bacterial infection are common problems during bone repair and reconstruction after bone tumor surgery. In this study, silver-anchored MoS₂ nanosheets (Ag@PMoS₂) were synthesized by in situ reduction, then a composite polymer scaffold (Ag@PMoS₂/PGA) with sustained antitumor and antibacterial activity was successfully constructed by selective laser sintering technique. In the Ag@PMoS₂ nanostructures, silver nanoparticles (Ag NPs) were sandwiched between adjacent MoS₂ nanosheets (MoS₂ NSs), which restrained the restacking of the MoS₂ NSs. In addition, the MoS₂ NSs acted as steric hindrance layers, which prevented the aggregation of Ag NPs. More importantly, MoS₂ NSs can provide a barrier layer for Ag NPs, hindering Ag NPs from reacting with the external solution to prevent its quick release. The results showed that Ag@PMoS₂/PGA scaffolds have stronger photothermal effect and antitumor function. Meanwhile, the Ag@PMoS₂/PGA scaffolds also demonstrated slow control of silver ion (Ag⁺) release and more efficient long-term antibacterial ability. Besides, composite scaffolds have been proved to kill the MG-63 cells by inducing apoptosis and inhibit bacterial proliferation by upregulating the level of bacterial reactive oxygen species. This kind of novel bifunctional implants with antitumor and antibacterial properties provides better choice for the artificial bone transplantation after primary bone tumor resection.

Bmal1- and Per2-mediated regulation of the osteogenic differentiation and proliferation of mouse bone marrow mesenchymal stem cells by modulating the Wnt/β-catenin pathway

BACKGROUND

Bmal1 and Per2 are the core components of the circadian clock genes (CCGs). Bmal1-/- mice exhibit premature aging, as indicated by hypotrichosis and osteoporosis, with a loss of proliferation ability. The same occurs in Per2-/- mice, albeit to a less severe degree. However, whether the effects of Bmal1 and Per2 on proliferation and osteogenic differentiation are synergistic or antagonistic remains unclear. Thus, our study aimed to explore the effects and specific mechanism.

METHODS AND RESULTS

Lentiviral and adenoviral vectors were constructed to silence or overexpress Bmal1 or Per2 and MTT, flow cytometry, RT-qPCR, WB, immunohistochemistry, alizarin red staining and ChIP-Seq analyses were applied to identify the possible mechanism. The successful knockdown and overexpression of Bmal1/Per2 were detected by fluorescence microcopy. Flow cytometry found out that Bmal1 or Per2 knockdown resulted in G1-phase cell cycle arrest. RT-qPCR showed the different expression levels of Wnt-3a, c-myc1 and axin2 in the Wnt/β-catenin signaling pathway as well as the gene expression change of Rorα and Rev-erbα. Meanwhile, related proteins such as β-catenin, TCF-1, and P-GSK-3β were detected. ALP activity and the amount of mineral nodules were compared. ChIP-Seq results showed the possible mechanism.

CONCLUSIONS

Bmal1 and Per2, as primary canonical clock genes, showed synergistic effects on the proliferation and differentiation of BMSCs. They would inhibit the Wnt/β-catenin signaling pathway by downregulating Rorα expression or upregulating Rev-erbα expression, both of which were also key elements of CCGs. And this may be the mechanism by which they negatively regulate the osteogenic differentiation of BMSCs. Bmal1 and Per2 show synergistic effects in the proliferation of BMSCs. In addition, they play a synergistic role in negatively regulating the osteogenic differentiation ability of BMSCs. Bmal1 and Per2 may regulate the aging of BMSCs by altering cell proliferation and osteogenic differentiation through Rorα and Rev-erbα to affect Wnt/β-catenin pathway.

Hybprinting for musculoskeletal tissue engineering

This review presents bioprinting methods, biomaterials, and printing strategies that may be used for composite tissue constructs for musculoskeletal applications. The printing methods discussed include those that are suitable for acellular and cellular components, and the biomaterials include soft and rigid components that are suitable for soft and/or hard tissues. We also present strategies that focus on the integration of cell-laden soft and acellular rigid components under a single printing platform. Given the structural and functional complexity of native musculoskeletal tissue, we envision that hybrid bioprinting, referred to as hybprinting, could provide unprecedented potential by combining different materials and bioprinting techniques to engineer and assemble modular tissues.

Magnetostrictive alloys: Promising materials for biomedical applications

Magnetostrictive alloys have attracted increasing attention in biomedical applications because of the ability to generate reversible deformation in the presence of external magnetic fields. This review focuses on the advances in magnetostrictive alloys and their biomedical applications. The theories of magnetostriction are systematically summarized. The different types of magnetostrictive alloys and their preparation methods are also reviewed in detail. The magnetostrictive strains and phase compositions of typical magnetostrictive alloys, including iron based, rare-earth based and ferrite materials, are presented. Besides, a variety of approaches to preparing rods, blocks and films of magnetostriction materials, as well as the corresponding methods and setups for magnetostriction measurement, are summarized and discussed. Moreover, the interactions between magnetostrictive alloys and cells are analyzed and emphasis is placed on the transduction and transformation process of mechanochemical signals induced by magnetostriction. The latest applications of magnetostrictive alloys in remote microactuators, magnetic field sensors, wireless implantable devices and biodegradable implants are also reviewed. Furthermore, future research directions of magnetostrictive alloys are prospected with focus on their potential applications in remote cell actuation and bone repair.

Evaluation of graphene-derived bone scaffold exposure to the calvarial bone_in-vitro and in-vivo studies

Graphene is a novel material which has recently been gaining great interest in the biomedical fields. Our previous study observed that graphene-derived particles help induce bone formation in a murine calvarial model. Here, we further developed a blended graphene-contained polycaprolactone (PCL/G) filament for application in a 3D-printed bone scaffold. Since implants are expected to be for long-term usage, in vitro cell culture and in vivo scaffold implants were evaluated in a critical-size bone defect calvarial model for over 60 weeks. Graphene greatly improved the mechanical strength by 30.2% compared to pure PCL. The fabricated PCL/G scaffolds also showed fine cell viability. In animal model, an abnormal electroencephalogram power spectrum and early signs of aging, such as hair graying and hair loss, were found in the group with a PCL/G scaffold compared to pure PCL scaffold. Neither of the abnormal symptoms caused death of all animals in both groups. The long-term use of graphene-derived biomaterials for in-vivo implants seems to be safe. But the comprehensive biosafety still needs further evaluation.

Development of a Hybrid Nanoink for 3D Bioprinting of Heterogeneous Tumor Models

Despite the rapid progress in applying three-dimensional (3D) printing in the field of tissue engineering, fabrication of heterogeneous and complex 3D tumor models remains a challenge. In this study, we report a hybrid nanoink (AGC) composed of alginate, gelatin methacryloyl (GelMA), and cellulose nanocrystal (CNC), designed for multinozzle microextrusion 3D printing of tumor models. Our results show that the ink consisting of 2 wt % alginate, 4 wt % GelMA, and 6 wt % cellulose nanocrystals (AGC246) possesses a superior shear-thinning property and little hysteresis in viscosity recovery. The fabrication of a colorectal cancer (CRC) model is demonstrated by printing a 3D topological substrate with AGC246 and then seeding/printing endothelial (EA-hy 926) and colorectal carcinoma (HCT 116) cells on top. Direct seeding of cells by dropping a cell suspension onto the 3D substrate with distinctive topological features (villi and trenches) deemed inadequate in either creating a monolayer of endothelial cells or precise positioning of cancer cell clusters, even with surface treatment to promote cell adhesion. In contrast, 3D biopinting of a CRC model using cell-laden AGC153, coupled with dual ultraviolet (UV) and ionic cross-linking, is shown to be successful. Hence, this study brings advancements in 3D bioprinting technology through innovative material and methodology designs, which could enable the fabrication of complex in vitro models for both fundamental studies of disease processes and applications in drug screening.

The management of bone defect using long non-coding RNA as a potential biomarker for regulating the osteogenic differentiation process

Tissue engineered bone brings hope to the treatment of bone defects, and the osteogenic differentiation of stem cells is the key link. Inducing osteogenic differentiation of stem cells may be a potential approach to promote bone regeneration. In recent years, lncRNA has been studied in the field increasingly, which is believed can regulate cell cycle, proliferation, metastasis, differentiation and immunity, participating in a variety of physiology and pathology processes. At present, it has been confirmed that certain lncRNAs regulate the osteogenesis of stem cells and take part in mediating signaling pathways including Wnt/β-catenin, MAPK, TGF-β/BMP, and Notch pathways. Here, we provided an overview of lncRNA, reviewed its researches in the osteogenic differentiation of stem cells, emphasized the importance of lncRNA in bone regeneration, and focused on the roles of lncRNA in signaling pathways, in order to make adequate preparations for applying lncRNA to bone tissue Engineering, letting it regulate the osteogenic differentiation of stem cells for bone regeneration.

In situ synthesis of hydroxyapatite nanorods on graphene oxide nanosheets and their reinforcement in biopolymer scaffold

Introduction

It is urgently needed to develop composite bone scaffold with excellent mechanical properties and bioactivity in bone tissue engineering. Combining graphene oxide (GO) and hydroxyapatite (HAP) for the reinforcement of biopolymer bone scaffold has emerged as a promising strategy. However, the dispersion of GO and HAP remains to be a big challenge.

Objectives

In this present work, the mechanical properties of GO and the bioactivity of and HAP were combined respectively via in situ synthesis for reinforcing biopolymer bone scaffold.

Methods

GO nanosheets were employed to in situ synthesize GO-HAP nanocomposite via hydrothermal reaction, in which their abundant oxygen-containing groups served as anchor sites for the chelation of Ca2+ and then Ca2+ absorbed HPO42- via electrovalent bonding to form homogeneously dispersed HAP nanorods. Thereby, the GO-HAP nanocomposite was blended with biopolymer poly-L-lactic acid (PLLA) for fabricating biopolymer scaffold by selective laser sintering (SLS).

Results

GO nanosheets were uniformly decorated with HAP nanorods, which were about 60 nm in length and 5 nm in diameter. The compressive strength and modulus of PLLA/12%GO-HAP were significantly increased by 53.71% and 98.80% compared to the pure PLLA scaffold, respectively, explained on the base of pull out, crack bridging, deflection and pinning mechanisms. Meanwhile, the mineralization experiments indicated the PLLA/GO-HAP scaffold displayed good bioactivity by inducing the formation of apatite layer. Besides, cell culturing experiments demonstrated the favorable cytocompatibility of scaffold by promoting cell adhesion and proliferation.

Conclusions

The present findings show the potential of PLLA/GO-HAP composite scaffold via in situ synthesis in bone tissue engineering.

Plasma SiOx:H Nanocoatings to Enhance the Antibacterial and Anti-Inflammatory Properties of Biomaterials

Purpose

Materials and Methods

Results

Conclusion

Laser Additively Manufactured Iron-Based Biocomposite: Microstructure, Degradation, and In Vitro Cell Behavior

A too slow degradation of iron (Fe) limits its orthopedic application. In this study, calcium chloride (CaCl2) was incorporated into a Fe-based biocomposite fabricated by laser additive manufacturing, with an aim to accelerate the degradation. It was found that CaCl2 with strong water absorptivity improved the hydrophilicity of the Fe matrix and thereby promoted the invasion of corrosive solution. On the other hand, CaCl2 could rapidly dissolve once contacting the solution and release massive chloride ion. Interestingly, the local high concentration of chloride ion effectively destroyed the corrosion product layer due to its strong erosion ability. As a result, the corrosion product layer covered on the Fe/CaCl2 matrix exhibited an extremely porous structure, thus exhibiting a significantly reduced corrosion resistance. Besides, in vivo cell testing proved that the Fe/CaCl2 biocomposite also showed favorable cytocompatibility.

Laser-Sintered Mg-Zn Supersaturated Solid Solution with High Corrosion Resistance

Solid solutions of Zn as an alloy element in Mg matrixes are expected to show improved corrosion resistance due to the electrode potential being positively shifted. In this study, a supersaturated solid solution of Mg-Zn alloy was achieved using mechanical alloying (MA) combined with laser sintering. In detail, supersaturated solid solution Mg-Zn powders were firstly prepared using MA, as it was able to break through the limit of phase diagram under the action of forced mechanical impact. Then, the alloyed Mg-Zn powders were shaped into parts using laser sintering, during which the limited liquid phase and short cooling time maintained the supersaturated solid solution. The Mg-Zn alloy derived from the as-milled powders for 30 h presented enhanced corrosion potential and consequently a reduced corrosion rate of 0.54 mm/year. Cell toxicity tests confirmed that the Mg-Zn solid solution possessed good cytocompatibility for potential clinical applications. This study offers a new strategy for fabricating Mg-Zn solid solutions using laser sintering with MA.

Nutrient Element Decorated Polyetheretherketone Implants Steer Mitochondrial Dynamics for Boosted Diabetic Osseointegration

As a chronic metabolic disease, diabetes mellitus (DM) creates a hyperglycemic micromilieu around implants, resulting inthe high complication and failure rate of implantation because of mitochondrial dysfunction in hyperglycemia. To address the daunting issue, the authors innovatively devised and developed mitochondria-targeted orthopedic implants consisted of nutrient element coatings and polyetheretherketone (PEEK). Dual nutrient elements, in the modality of ZnO and Sr(OH)2 , are assembled onto the sulfonated PEEK surface (Zn&Sr-SPEEK). The results indicate the synergistic liberation of Zn2+ and Sr2+ from coating massacres pathogenic bacteria and dramatically facilitates cyto-activity of osteoblasts upon the hyperglycemic niche. Intriguingly, Zn&Sr-SPEEK implants are demonstrated to have a robust ability to recuperate hyperglycemia-induced mitochondrial dynamic disequilibrium and dysfunction by means of Dynamin-related protein 1 (Drp1) gene down-regulation, mitochondrial membrane potential (MMP) resurgence, and reactive oxygen species (ROS) elimination, ultimately enhancing osteogenicity of osteoblasts. In vivo evaluations utilizing diabetic rat femoral/tibia defect model at 4 and 8 weeks further confirm that nutrient element coatings substantially augment bone remodeling and osseointegration. Altogether, this study not only reveals the importance of Zn2+ and Sr2+ modulation on mitochondrial dynamics that contributes to bone formation and osseointegration, but also provides a novel orthopedic implant for diabetic patients with mitochondrial modulation capability.

Pre-oxidation induced in situ interface strengthening in biodegradable Zn/nano-SiC composites prepared by selective laser melting

•

Zn/nano-SiC biocomposites were prepared via pre-oxidation and selective laser melting.

•

In situ reaction improved the interface bonding between nano-SiC and the Zn matrix.

•

The improved interfacial bonding enhanced the mechanical properties of the biocomposite.

•

The biocomposite exhibited favorable biocompatibility on cell proliferation and adhesion.

Introduction

Nano-SiC has attracted great attention as ceramic reinforcement in metal matrix composites, but the weak interface bonding between them remains a bottleneck for efficient strengthening.

Objective

In this study, pre-oxidation treatments and selective laser melting (SLM) were employed to prepare Zn/nano-SiC biocomposites with strengthened interface bonding via in situ reaction.

Methods

Nano-SiC and Zn powders were pre-oxidized respectively, and then used to prepare Zn/nano-SiC biocomposites via SLM. The powder microstructure, and the interface characteristics and mechanical properties of the biocomposites were investigated. The degradation properties and cell response were analyzed to evaluate their feasibility for orthopedic applications.

Results

The results indicated that the pre-oxidation treatments generated a uniform oxide layer on the surface of both nano-SiC and Zn particles and the thickness of the oxide layer increased with pre-oxidation temperature. During the SLM process, the oxide layers not only improved the metal-ceramic wettability by reducing interface energy, but also induced in situ reaction to form chemical bonding between the Zn matrix and nano-SiC, thereby improving the interface bonding. Consequently, the Zn biocomposite reinforced by nano-SiC with a pre-oxidation temperature of 1000 °C (ZS1000 biocomposite) exhibited more transgranular fracture and significantly enhanced compressive yield strength of 171.5 MPa, which was 31.6% higher than that of the Zn biocomposite reinforced by nano-SiC without pre-oxidation. Moreover, the ZS1000 biocomposite presented slightly accelerated degradation which might be ascribed to the facilitated electron transfer by the interface product (Zn₂SiO₄). In addition, the ZS1000 biocomposite also showed appropriate biocompatibility for MG-63 cell adhesion, growth, and proliferation.

Conclusion

This study shows the potential practical applicability for the preparation of Zn-based biocomposites with strong interface bonding and mechanical properties for orthopedic applications.

Silver-doped bioglass modified scaffolds: A sustained antibacterial efficacy

Implant-related bacterial infection is a serious complication, which even causes implant failure. Silver (Ag) nanoparticles are broadly used antibacterial agents due to their excellent antibacterial ability and broad-spectrum bactericidal property. However, the significance of burst release cannot be entirely ignored. In this study, Ag doped mesoporous bioactive glasses (Ag-MBG) nanospheres were synthesized using modified Stöber method, then incorporated into poly L-lactic acid (PLLA) matrix to prepare the composite scaffolds via selective laser sintering (SLS) technology. Herein, Mesoporous bioactive glasses (MBG) sol had many negatively-charged silicon hydroxyl groups, which could adsorb positively-charged Ag ions by electrostatic interaction and eventually form Si-O-Ag bonds into MBG. Moreover, MBG promoted osteoblast colonization due to its continuous release of Si ions. The results showed the Ag-MBG/PLLA scaffold could sustainedly release Ag ions for 28 days, and exhibited significantly antibacterial ability against Escherichia coli, its bacterial inhibition rate was over 80%. In addition, the composite scaffold also showed good cytocompatibility. It may be concluded that the prepared Ag-MBG/PLLA scaffold has great potential to repair implant-associated bone infection.

Regeneration of Bone Defects in a Rabbit Femoral Osteonecrosis Model Using 3D-Printed Poly (Epsilon-Caprolactone)/Nanoparticulate Willemite Composite Scaffolds

Steroid-associated osteonecrosis (SAON) is a chronic disease that leads to the destruction and collapse of bone near the joint that is subjected to weight bearing, ultimately resulting in a loss of hip and knee function. Zn2+ ions, as an essential trace element, have functional roles in improving the immunophysiological cellular environment, accelerating bone regeneration, and inhibiting biofilm formation. In this study, we reconstruct SAON lesions with a three-dimensional (3D)-a printed composite made of poly (epsilon-caprolactone) (PCL) and nanoparticulate Willemite (npW). Rabbit bone marrow stem cells were used to evaluate the cytocompatibility and osteogenic differentiation capability of the PCL/npW composite scaffolds. The 2-month bone regeneration was assessed by a Micro-computed tomography (micro-CT) scan and the expression of bone regeneration proteins by Western blot. Compared with the neat PCL group, PCL/npW scaffolds exhibited significantly increased cytocompatibility and osteogenic activity. This finding reveals a new concept for the design of a 3D-printed PCL/npW composite-based bone substitute for the early treatment of osteonecrosis defects.

Polydopamine-decorated black phosphorous to enhance stability in polymer scaffold

Black phosphorous (BP) is recognized as an effective reinforcement for polymer scaffold because of its excellent mechanical property and biocompatibility. Nevertheless, its poor stability in physiological environment limits its application in bone repair. In this work, BP was modified with dopamine by self-polymerization approach (donated as BP@PDA) to improve its stability, and then was introduced into poly-L-lactic acid (PLLA) scaffold fabricated by selective laser sintering technology. Results showed the compressive and tensile strength of PLLA/BP@PDA scaffold were improved by 105% and 50%, respectively. The enhanced strength was ascribed to the increased stability of BP and the improved compatibility of BP@PDA with PLLA matrix after modifying with polydopamine. Simultaneously, the bioactivity of PLLA scaffold was significantly improved. It was attributed to that BP@PDA provided the sustained source ofPO43-ions which could capture Ca²⁺ions from physiological medium to facilitatein situbiomineralization, thereby promoting cell adhesion, proliferation and differentiation. This study demonstrated the great potential of BP@PDA in bone repair.

Construction of Fe3O4-Loaded Mesoporous Carbon Systems for Controlled Drug Delivery

Magnetite (Fe₃O₄) nanoparticles as drug carriers can achieve precise drug target due to their magnetic property. However, they are easy to aggregate in the physiological environment, which obviously limits their application in drug delivery. The development of the Fe-MIL-88B-derived method to construct the Fe₃O₄-loaded mesoporous carbon (Fe₃O₄/carbon) system is a feasible strategy to solve the issue. First, iron atoms evenly distribute in the organic links through coordination bonds in Fe-MIL-88B. After the carbonization of Fe-MIL-88B, mesoporous carbon acts as a barrier to prevent the aggregation of Fe₃O₄ nanoparticles. Herein, Fe-MIL-88B particles were fabricated by the hydrothermal method and then pyrolyzed to construct Fe₃O₄/carbon systems. Results showed that Fe₃O₄ nanoparticles uniformly in situ grew on mesoporous carbon generated by the carbonization of organic components. More encouragingly, the Fe₃O₄/carbon system loaded with DOX demonstrated pH-responsive DOX release, efficient delivery of DOX into cancer cells, and significant cancer cell killing ability. Therefore, the Fe₃O₄/carbon systems prepared by the Fe-MIL-88B-derived method might open up a way for targeted and controlled drug delivery.

Constructing core-shell structured BaTiO3@carbon boosts piezoelectric activity and cell response of polymer scaffolds

Piezoelectric composites have shown great potential in constructing electrical microenvironment for bone healing since their integration of polymer flexibility and ceramic piezoelectric coefficient. Herein, core-shell structured BaTiO₃@carbon (BT@C) hybrid nanoparticles were prepared by in situ oxidative self-polymerization and template carbonization. Then the BT@C was introduced into polyvinylidene fluoride (PVDF) scaffolds manufactured by selective laser sintering. On one hand, the carbon shell could strengthen the local electric field loaded on BT in poling process owing to it served as a diffusion layer to provide space for charge transfer and accumulation. In this case, more electric domain within BT would be aligned along the polarization field direction and thus promoted the paly of BT's piezoelectric activity. On the other hand, the carbon shell could induce the formation of β phase due to the sp² hybrid-bonded carbon atoms in carbon shell forming electrostatic interaction with hydrogen atoms in PVDF chains, which further enhanced the piezoelectric response of the scaffolds. Results showed that the scaffold presented augmented piezoelectric performance with output voltage of 5.7 V and current of 79.8 nA. The improved electrical signals effectively accelerated cell proliferation and differentiation. Furthermore, the scaffold displayed improved mechanical performance due to rigid particle strengthen effect.