P-15 cell-binding domain derived from collagen: analysis of MG63 osteoblastic-cell response by means of a microarray technology

The Osteogenic Peptide P-15 for Bone Regeneration: A Narrative Review of the Evidence for a Mechanism of Action

Bone regeneration is a complex multicellular process involving the recruitment and attachment of osteoprogenitors and their subsequent differentiation into osteoblasts that deposit extracellular matrixes. There is a growing demand for synthetic bone graft materials that can be used to augment these processes to enhance the healing of bone defects resulting from trauma, disease or surgery. P-15 is a small synthetic peptide that is identical in sequence to the cell-binding domain of type I collagen and has been extensively demonstrated in vitro and in vivo to enhance the adhesion, differentiation and proliferation of stem cells involved in bone formation. These events can be categorized into three phases: attachment, activation and amplification. This narrative review summarizes the large body of preclinical research on P-15 in terms of these phases to describe the mechanism of action by which P-15 improves bone formation. Knowledge of this mechanism of action will help to inform the use of P-15 in clinical practice as well as the development of methods of delivering P-15 that optimize clinical outcomes.

Production and Characterization of an Integrated Multi-Layer 3D Printed PLGA/GelMA Scaffold Aimed for Bile Duct Restoration and Detection

We successfully fabricated artificial bile duct via 3D printing technique which was composed of poly (lactic-co-glycolic acid) (PLGA) and gelatin methacrylate (GelMA). The PLGA-inner layer provided sufficient strength to support the bile duct contraction, the GelMA-outer layer possessed good biocompatibility to provide a good living environment for the cells. Moreover, IKVAV laminin peptide (Ile-Lys-Val-Ala-Val) and ultrasmall superparamagnetic iron oxide (USPIO) were used to regulate scaffold cell adhesion and magnetic resonance imaging (MRI) detection, respectively. After BMSCs co-culture with IKVAV at a certain concentration, the survival rate and adhesion of BMSCs was increased obviously. Meanwhile, the fabricated scaffold exhibited the tensile modulus in the range of 17.19 - 29.05 MPa and the compressive modulus in the range of 0.042 - 0.066 MPa, which could meet the needs of human implantation. In an animal experiment in vivo pig bile duct regeneration, PLGA/GelMA/IKVAV/USPIO duct conduits could promote bile duct regeneration and enhance cytokeratin 19 (CK19) expression. In summary, the composite bile duct scaffold with excellent MRI imaging function and biocompatibility could be used to develop bioactive artificial bile ducts.

Comparing bone tissue engineering efficacy of HDPSCs, HBMSCs on 3D biomimetic ABM-P-15 scaffolds in vitro and in vivo

Human bone marrow mesenchymal stem cells (HBMSCs) has been the gold standard for bone regeneration. However, the low proliferation rate and long doubling time limited its clinical applications. This study aims to compare the bone tissue engineering efficacy of human dental pulp stem cells (HDPSCs) with HBMSCs in 2D, and 3D anorganic bone mineral (ABM) coated with a biomimetic collagen peptide (ABM-P-15) for improving bone-forming speed and efficacy in vitro and in vivo. The multipotential of both HDPSCs and HBMSCs have been compared in vitro. The bone formation of HDPSCs on ABM-P-15 was tested using in vivo model. The osteogenic potential of the cells was confirmed by alkaline phosphatase (ALP) and immunohistological staining for osteogenic markers. Enhanced ALP, collagen, lipid droplet, or glycosaminoglycans production were visible in HDPSCs and HBMSCs after osteogenic, adipogenic and chondrogenic induction. HDPSC showed stronger ALP staining compared to HBMSCs. Confocal images showed more viable HDPSCs on both ABM-P-15 and ABM scaffolds compared to HBMSCs on similar scaffolds. ABM-P-15 enhanced cell attachment/spreading/bridging formation on ABM-P-15 scaffolds and significantly increased quantitative ALP specific activities of the HDPSCs and HBMSCs. After 8 weeks in vivo implantation in diffusion chamber model, the HDPSCs on ABM-P-15 scaffolds showed extensive high organised collagenous matrix formation that was positive for COL-I and OCN compared to ABM alone. In conclusion, the HDPSCs have a higher proliferation rate and better osteogenic capacity, which indicated the potential of combining HDPSCs with ABM-P-15 scaffolds for improving bone regeneration speed and efficacy.

Effects of pulsed electromagnetic fields on human osteoblastlike cells (MG-63): a pilot study

BACKGROUND

Although pulsed electromagnetic fields (PEMFs) are used to treat delayed unions and nonunions, their mechanisms of action are not completely clear. However, PEMFs are known to affect the expression of certain genes.

QUESTIONS/PURPOSES

We asked (1) whether PEMFs affect gene expression in human osteoblastlike cells (MG63) in vitro, and (2) whether and to what extent stimulation by PEMFs induce cell proliferation and differentiation in MG-63 cultures.

METHODS

We cultured two groups of MG63 cells. One group was treated with PEMFs for 18 hours whereas the second was maintained in the same culture condition without PEMFs (control). Gene expression was evaluated throughout cDNA microarray analysis containing 19,000 genes spanning a substantial fraction of the human genome.

RESULTS

PEMFs induced the upregulation of important genes related to bone formation (HOXA10, AKT1), genes at the transductional level (CALM1, P2RX7), genes for cytoskeletal components (FN1, VCL), and collagenous (COL1A2) and noncollagenous (SPARC) matrix components. However, PEMF induced downregulation of genes related to the degradation of extracellular matrix (MMP-11, DUSP4).

CONCLUSIONS AND CLINICAL RELEVANCE

PEMFs appear to induce cell proliferation and differentiation. Furthermore, PEMFs promote extracellular matrix production and mineralization while decreasing matrix degradation and absorption. Our data suggest specific mechanisms of the observed clinical effect of PEMFs, and thus specific approaches for use in regenerative medicine.

Early effects of p-15 on human bone marrow stem cells

OBJECTIVES

Peptide-15 (P-15) is an analogue of the cell binding domain of collagen. P-15 has been shown to facilitate physiological to process in a way similar to collagen, to serve as anchorage for cells, and to promote the binding, migration and differentiation of cells. However, how P-15 alters osteoblast activity to promote bone formation is poorly understood. To study the osteoinductive properties of peptide P-15, we analyzed the expression levels of bone related genes in human mesenchymal stem cells treated with this biomaterial.

MATERIAL AND METHODS

Using real time Reverse Transcription-Polymerase Chain Reaction the quantitative expression of specific genes, like transcriptional factors (RUNX2 and SP7), bone related genes (SPP1, COL1A1, COL3A1, BGLAP, ALPL, and FOSL1) and mesenchymal stem cells marker (ENG) were examined.

RESULTS

P-15 causes a considerable induction of osteoblast transcriptional factor like osterix (SP7) and of the bone related genes osteopontin (SPP1) and osteocalcin (BGLAP). In contrast the expression of endoglin (ENG) was markedly decreased in stem cells treated with P-15 respect to untreated cells, indicating the differentiation effect of this biomaterial on stem cells.

CONCLUSIONS

The present study shows the effect of P-15 on mesenchymal stem cells in the early differentiation stages: P-15 is an inducer of osteogenesis on human stem cells as indicated by the activation of bone related markers SP7, SPP1 and BGLAP.The results may allow a better understanding of the molecular mechanism of bone regeneration and as a model for comparing other materials with similar clinical effects.

ABM/P-15 modulates proliferation and mRNA synthesis of growth factors of periodontal ligament cells

OBJECTIVE

Periodontal regeneration is histologically defined as regeneration of the tooth supporting structures, including alveolar bone, periodontal ligament, and cementum. Cells in the remaining periodontal tissues need optimal conditions if they are to perform their functions in the regeneration process. The present study is an investigation of the molecular effects of ABM/P-15 on human periodontal ligament cells (PDL) in vitro.

MATERIAL AND METHODS

PDL cells obtained from healthy subjects were used for in vitro experiments. Cell proliferation, morphology, and mineralization using Von kossa staining were evaluated. mRNA expressions for transforming growth factor-beta (TGF-beta), insulin-like growth factor-I (IGF-I), basic fibroblast growth factor (b-FGF), vascular endothelial growth factor (VEGF), bone morphogenic protein-2 (BMP-2), platelet-derived growth factor (PDGF), and type 1 collagen (COL1) were assessed on days 3 and 7 using RT-PCR.

RESULTS

ABM/P-15 enhanced proliferation of cultured PDL cells. It increased the mRNA expression of TGF-beta and BMP-2 in cultured PDL cells on days 3 and 7. IGF-I and b-FGF mRNA expressions showed a slight decrease, while PDGF expression was observed to have increased on day 3. VEGF and COL1 mRNA expressions were found not to be different on days 3 and 7. No differences were observed in the mineralization properties of cultured PDL cells treated with or without ABM/P-15.

CONCLUSIONS

Based on the results of this in vitro study, it may be concluded that ABM/P-15 enhanced the regenerative capacity of PDL by regulating specific gene expressions of cells during early wound healing.

Genetic effect of zirconium oxide coating on osteoblast-like cells

Zirconium is widely used as material for prosthetic devices because its good mechanical and chemical properties. When exposed to oxygen, zirconium becomes zirconium oxide (ZrO(2)), which is biocompatible. ZrO(2) can be also prepared as a colloidal suspension and then used to coat surfaces. Zirconium oxide coating (ZrO(2)C) can potentially have specific biologic effects, and among them is bone formation related to implant osseointegration. How this biomaterial alters osteoblast activity to promote bone formation is poorly understood. We therefore attempted to address this question by using microarray techniques to identify genes that are differently regulated in osteoblasts exposed to ZrO(2)C. By using DNA microarrays containing 20,000 genes, we identified in osteoblast-like cell lines (MG-63) cultured with ZrO(2)C several genes whose expression was significantly upregulated or downregulated. The differentially expressed genes cover a broad range of functional activities: (a) cell cycle regulation, (b) signal transduction, (c) immunity, and (d) cytoskeleton component. The data reported are, to our knowledge, the first genetic portrait of ZrO(2)C effects. They can be relevant to better understand the molecular mechanism of bone regeneration and as a model for comparing other materials with similar clinical effects.

Genetic effect of anatase on osteoblast-like cells

Titanium is the gold standard among materials used for prosthetic devices, because of its good mechanical and chemical properties. When exposed to oxygen, titanium becomes an oxide that is biocompatible and able to induce osseointegration. Three allotropic forms of titanium dioxide exist, that is brookite, rutile, and anatase. Anatase can be prepared as a colloidal suspension and then used to coat surfaces. Anatase coating (AC) can potentially have specific biological effects. Here we are testing the effect of AC on osteoblast-like cells (MG63) by using microarray techniques to identify genes that are differently regulated in osteoblasts exposed to AC. By using DNA microarrays containing 20,000 genes, we identified in osteoblast-like cell lines (MG-63) cultured on AC, several genes whose expression was significantly up- or downregulated. They cover a broad range of functional activities: signaling transduction, immunity, cell cycle regulation, lysosomes composition and vesicular transport, cell adhesion, cytoskeleton and extracellular matrix components, proliferation, and apoptosis. The data reported constitute, to our knowledge, the first genetic portrait of AC effects. They can be relevant to a better understanding of the molecular mechanism of bone regeneration and as a model for comparing other materials with similar clinical effects.

A proteome chip approach reveals new DNA damage recognition activities in Escherichia coli

Despite the fact that many genomes have been decoded, proteome chips comprising individually purified proteins have been reported only for budding yeast, mainly because of the complexity and difficulty of high-throughput protein purification. To facilitate proteomics studies in prokaryotes, we have developed a high-throughput protein purification protocol that allowed us to purify 4,256 proteins encoded by the Escherichia coli K12 strain within 10 h. The purified proteins were then spotted onto glass slides to create E. coli proteome chips. We used these chips to develop assays for identifying proteins involved in the recognition of potential base damage in DNA. By using a group of DNA probes, each containing a mismatched base pair or an abasic site, we found a small number of proteins that could recognize each type of probe with high affinity and specificity. We further evaluated two of these proteins, YbaZ and YbcN, by biochemical analyses. The assembly of libraries containing DNA probes with specific modifications and the availability of E. coli proteome chips have the potential to reveal important interactions between proteins and nucleic acids that are time-consuming and difficult to detect using other techniques.

A mineralization-associated membrane protein plays a role in the biological functions of the peptide-coated bovine hydroxyapatite

BACKGROUND AND OBJECTIVE

Anorganic bovine mineral coated with a cell-binding peptide (P-15) is superior to anorganic bovine mineral alone in the treatment of periodontal osseous defects. However, the molecular interactions between P-15 and periodontal ligament fibroblasts remain unclear.

MATERIAL AND METHODS

We first compared the in vitro osteogenic activities between periodontal ligament fibroblasts cultured with anorganic bovine mineral alone and with the P-15/anorganic bovine mineral combination. We then harvested the periodontal ligament cell lysate, incubated it with various graft materials, and then washed it to remove unbound proteins. The bound proteins were eluted from graft materials and analyzed using electrophoresis, followed by mass spectrometry and then western blotting. Finally, a neutralizing antibody against one bound protein was added to the cell cultures to repeat the osteogenic assays to clarify its role in the in vitro effects of the P-15/anorganic bovine mineral combination.

RESULTS

Cells treated with P-15/anorganic bovine mineral were more viable and showed greater osteogenic activities than cells treated with anorganic bovine mineral alone and the no-graft control. Annexin II, a mineralization-associated protein, bound to P-15/anorganic bovine mineral significantly more than to anorganic bovine mineral alone. The addition of neutralizing antibody for annexin II decreased the osteogenic activities of the P-15/anorganic bovine mineral combination.

CONCLUSION

Annexin II of periodontal ligament fibroblasts interacted with the peptide of P-15, and was partially responsible for better in vitro osteogenesis in the P-15 graft.

Augmentation of osseous phenotypes in vivo with a synthetic peptide

The synthetic peptide B2A2-K-NS augmented the in vitro expression of osseous phenotypes when cells were stimulated with BMP-2, an osteoinductive growth factor. B2A2-K-NS significantly enhanced the effects of BMP-2-induced alkaline phosphatase activity and mineralization. In the absence of BMP-2, B2A2-K-NS did not have an effect on these endpoints. Based on these observations, in vivo studies were conducted to evaluate if B2A2-K-NS could augment osseous phenotypes in an osteoinductive environment in which BMP-2 should be present. In one study, human demineralized bone matrix (DBM) was used to generate an osteoinductive environment and the effects of B2A2-K-NS on ectopic mineralization of subcutaneous implants evaluated. In the second study, a noncritical sized defect in rabbit ulnas with inherent reparative capacity was used as the osteoinductive environment and was treated with or without B2A2-K-NS. In the DBM studies, B2A2-K-NS augmented mineralization as determined using a combination of radiographic analysis and von Kossa staining at 4 weeks postimplant. In the rabbit ulna model, B2A2-K-NS significantly increased the radiographic bone density in the defects compared to carrier-only or no-treatment controls after 6 weeks. Histological staining confirmed that B2A2-K-NS generated a pronounced bone repair response. The results are consistent with the hypothesis that B2A2-K-NS augments osseous phenotypes in an osteoinductive environment, and suggests that B2A2-K-NS may have clinical utility.

Genetic Effects of Medpor® on Osteoblast-like Cells

Porous polyethylene (PP or Medpor) is an alloplastic material used worldwide for craniofacial reconstruction. Although several clinical studies are available, there is a lack as regard the genetic effects. Because PP is always fixed on bone and the mechanism by which PP acts on osteoblasts is unknown, we therefore attempted to address this question by using microarray techniques to identify genes that are differently regulated in osteoblasts exposed to PP. By using DNA microarrays containing 19,200 genes, we identified in osteoblast-like cell lines (i.e. MG-63) cultured on PP several genes where expression was differentially regulated. The differentially expressed genes cover a broad range of functional activities: 1) signal transduction, 2) transcription, 3) translation, 4) cell cycle regulation, 5) vesicular transport, and 6) production of cytoskeletal elements, cell-adhesion molecules and extracellular matrix components. The data reported are, to our knowledge, the first genetic portrait of osteoblast-like cells cultured on PP. They are relevant to better understanding of the molecular mechanism of bone-PP interaction and as a model for comparing other materials used for bone reconstruction.

Molecular genetic studies of gene identification for osteoporosis: a 2004 update

This review summarizes comprehensively the most important and representative molecular genetics studies of gene identification for osteoporosis published up to the end of December 2004. It is intended to constitute a sequential update of our previously published review covering the available data up to the end of 2002. Evidence from candidate gene association studies and genome-wide linkage studies in humans, as well as quantitative trait locus mapping animal models are reviewed separately. Studies of transgenic and knockout mice models relevant to osteoporosis are summarized. An important extension of this update is incorporation of functional genomic studies (including DNA microarrays and proteomics) on osteogenesis and osteoporosis, in light of the rapid advances and the promising prospects of the field. Comments are made on the most notable findings and representative studies for their potential influence and implications on our present understanding of genetics of osteoporosis. The format adopted by this review should be ideal for accommodating future new advances and studies.

Enhancement of cell attachment and tissue integration by a IKVAV containing multi-domain peptide

Laminin contains a number of cell binding motifs including IKVAV and some that bind heparin. We developed a multi-domain synthetic peptide, LA2, which combines IKVAV sequences with a heparin-binding domain with the goal of improving cell attachment to otherwise non-adherent substrates. LA2 was used to coat polystyrene, ethyl vinyl acetate (EVA), expanded polytetrafluoroethylene (ePTFE), polycarbonate, titanium and stainless steel. In cell attachment studies, LA2 dramatically increased cell attachment to polystyrene and EVA compared to uncoated counterparts or those coated with SIKVAV. Similar increases were observed on ePTFE and titanium. On polystyrene, LA2 enhanced the attachment of endothelial cells, smooth muscle cells, epithelial cells, myoblasts, and osteoblast progenitor cells. Following adhesion, the cells underwent proliferation to form confluent monolayers with phenotypic morphologies. Using osteoblast progenitor cells (MC3T3 cells) grown on LA2/polystyrene, the cells exhibited an increased production of a differentiation marker, alkaline phosphatase. In vivo, LA2 improved tissue integration into ePTFE when implanted subcutaneously in rats. After 2 weeks, cells had penetrated deep into the LA2 coated ePTFE implant whereas little cell penetration was found in uncoated grafts. The implant sites exhibited little inflammation or other untoward effects. The results indicated that the LA2 peptide improved cell adhesion and tissue integration and might be useful in a number of tissue engineering applications.

Effects of Emdogain on osteoblast gene expression

OBJECTIVE

Emdogain (EMD) is a protein extract purified from porcine enamel and has been introduced in clinical practice to obtain periodontal regeneration. EMD is composed mainly of amelogenins (90%), while the remaining 10% is composed of non-amelogenin enamel matrix proteins such as enamelins, tuftelin, amelin and ameloblastin. Enamel matrix proteins seem to be involved in root formation. EMD has been reported to promote proliferation, migration, adhesion and differentiation of cells associated with healing periodontal tissues in vivo.

DESIGN

How this protein acts on osteoblasts is poorly understood. We therefore attempted to address this question by using a microarray technique to identify genes that are differently regulated in osteoblasts exposed to enamel matrix proteins.

RESULTS

By using DNA microarrays containing 20,000 genes, we identified several upregulated and downregulated genes in the osteoblast-like cell line (MG-63) cultured with enamel matrix proteins (Emd). The differentially expressed genes cover a broad range of functional activities: (i) signaling transduction, (ii) transcription, (iii) translation, (iv) cell cycle regulation, proliferation and apoptosis, (v) immune system, (vi) vesicular transport and lysosome activity, and (vii) cytoskeleton, cell adhesion and extracellular matrix production.

CONCLUSIONS

The data reported are the first genome-wide scan of the effect of enamel matrix proteins on osteoblast-like cells. These results can contribute to our understanding of the molecular mechanisms of bone regeneration and as a model for comparing other materials with similar clinical effects.

Maxillary Sinus Augmentation With a Synthetic Cell-Binding Peptide: Histological and Histomorphometrical Results in Humans

Bone substitutes should be used when sufficient amounts of autologous bone cannot be harvested from intraoral donor sites. P-15 is a highly conserved linear peptide with a 15 amino acid sequence identical to the sequence contained in the residues 766 to 780 of the alpha-chain of type I collagen. PepGen P-15 (Dentsply Friadent, Mannheim, Germany) is a combination of the mineral component of bovine bone (Osteograf/N 300) with P-15. Bio-Oss (Geistlich, Mannheim, Germany) is a deproteinized sterilized bovine bone with 75% to 80% porosity and a crystal size of approximately 10 μm in the form of cortical granules. The purpose of the present histological and histomorphometrical study was to compare maxillary sinus augmentation procedures in humans performed with PepGen P-15 with procedures associated with Bio-Oss and autologous bone. Seven patients participated in this study (3 men and 4 women; ages between 48 and 69 years, mean of 58 years) and were categorized into 3 groups. In group 1, a mixture of 50% autologous bone from an intraoral source and 50% Bio-Oss was used. In group 2, the graft materials used were 50% Bio-Oss and 50% PepGen P-15. In group 3, 50% autologous bone and 50% PepGen P-15 were used. Group 1 histomorphometry showed that the percentage of newly formed bone was 38.7% ± 3.2%, marrow spaces represented 45.6% ± 5%, and residual graft particles constituted the remaining 14.4% ± 2.1%. Group 2 histomorphometry showed that newly formed bone represented 36.7% ± 3.3%, marrow spaces represented 39.7% ± 3.4%, and residual graft particles represented 19.6% ± 2.1%. In group 3, newly formed bone represented 32.2% ± 3.2%, marrow spaces represented 38% ± 2.5%, and residual graft particles represented 28.8% ± 1.1%. Nonstatistically significant differences were found in the percentage of newly formed bone in the different groups (P = .360). Statistically significant differences were found in the percentage of residual graft materials among the different groups (group 1 vs groups 2 and 3) (P = .0001). These data demonstrate that the use of bone-replacement materials, without the addition of autologous bone, could be an alternative in sinus augmentation procedures. Such treatment would increase patient satisfaction, decrease surgical complications, and save the clinician substantial operating time.