Antimicrobial Agents Used in the Treatment of Peri‐Implantitis Alter the Physicochemistry and Cytocompatibility of Titanium Surfaces

Current approaches to produce durable biomaterials: Trends in polymeric materials for restorative dentistry applications

Dental caries continues to be a public health issue, especially more evident in underserved populations throughout the U.S. Unfortunately, especially with an aging population, hundreds of thousands of resin composite restorations are replaced each year due to recurring decay and fracture. According to several cohort studies, the average life span of this type of restoration is 10 years or less, depending on the caries risk level of the patient and the complexity of the restorative procedure. Any new material development must depart from the simple restoration of form paradigm, in which the filling is simply inert/biocompatible. This review will discuss novel antibiofilm structures, based on a targeted approach specifically against dysbiotic bacteria. Biofilm coalescence can be prevented by using glycosyl transferase - GTF inhibitors, in a non-bactericidal approach. On the tooth substrate side, MMP-inhibiting molecules can improve the stability of the collagen in the hybrid layer. This review will also discuss the importance of testing the materials in a physiologically relevant environment, mimicking the conditions in the mouth in terms of mechanical loading, bacterial challenge, and the presence of saliva. Ultimately, the goal of materials development is to achieve durable restorations, capable of adapting to the oral environment and resisting challenges that go beyond mechanical demands. That way, we can prevent the unnecessary loss of additional tooth structure that comes with every re-treatment. CLINICAL SIGNIFICANCE: While proper restorative technique and patient education in terms of diet and oral hygiene are crucial factors in increasing the longevity of esthetic direct restorations, materials better able to resist and interact with the conditions of the oral environment are still needed. Reproducing the success of dental amalgams with esthetic materials continues to be the Holy Grail of materials development.

Antimicrobial efficiency and cytocompatibility of resveratrol and naringin as chemical decontaminants on SLA surface

Bacterial biofilms are the major etiology agent of peri-implant disease. Chemical decontamination is a promising treatment strategy against bacterial biofilms; however, its applications are limited by its low efficiency and poor biocompatibility. In contrast to three conventional cleaners (sterile saline, hydrogen peroxide, and chlorhexidine), this study used resveratrol and naringin solutions to remove mature Staphylococcus aureus and Porphyromonas gingivalis biofilm on sandblasted (with large grit and acid-etched (SLA) titanium surface. To determine changes in surface characteristics, the surface wettability and roughness were measured, and micromorphology was observed by scanning electron microscopy. With crystal violet (CV) and live/dead bacterial staining, residual plaque quantity and composition were measured. The biocompatibility was tested using pH and cytotoxicity, as well as by osteoblasts (MC3T3-E1) adhesion, proliferation, and differentiation, and fibroblasts (L-929) proliferation were also analyzed. It was found that resveratrol and naringin solutions were more effective in restoring surface characteristics and also showed that less plaque and viable bacteria were left. Naringin removed S. aureus biofilms better than chlorhexidine. Alkaline resveratrol and naringin solutions increased cell adhesion, proliferation, and osteogenic differentiation without any cytotoxicity. Resveratrol increased the expression of mRNA and protein associated with osteogenesis. In conclusion, resveratrol and naringin effectively restored SLA titanium surface characteristics and decontaminated the biofilm with good biocompatibility, suggesting their therapeutic potential as chemical decontaminants.

IMPORTANCE

Bacterial biofilms are considered the primary etiology of peri-implant disease. Physical cleaning is the most common way to remove bacterial biofilm, but it can cause grooving, melting, and deposition of chemicals that alter the surface of implants, which may hamper biocompatibility and re-osseointegration. Chemical decontamination is one of the most promising treatments but is limited by low efficiency and poor biocompatibility. Our study aims to develop safer, more effective chemical decontaminants for peri-implant disease prevention and treatment. We focus on resveratrol and naringin, two natural compounds, which have shown to be more effective in decontaminating biofilms on dental implant surfaces and exerting better biocompatibility. This research is groundbreaking as it is the first exploration of natural plant extracts' impact on mature bacterial biofilms on rough titanium surfaces. By advancing this knowledge, we seek to contribute to more effective and biocompatible strategies for combating peri-implant diseases, enhancing oral health, and prolonging implant lifespan.

Impact of surface chemical treatment in surgical regenerative treatment of ligature-induced peri-implantitis: A canine study

BACKGROUND

Implant surface decontamination is a critical step in peri-implantitis treatment. The aim of this study was to assess the effect chemotherapeutic agents have on reosseointegration after treatment on ligature-inducted peri-implantitis.

METHODS

Six male canines had 36 implants placed and ligatures were placed around them for 28 weeks to establish peri-implantitis. The peri-implant defects were randomly treated by 1 of 3 methods: 0.12% chlorhexidine (CHX test group), 1.5% sodium hypochlorite (NaOCl test group), or saline (Control group). Sites treated with NaOCl and CHX were grafted with autogenous bone, and all sites then either received a collagen membrane or not. Histology sections were obtained at 6 months postsurgery to assess percentage of reosseointegration.

RESULTS

Thirty-five implants were analyzed (CHX: 13; NaOCl: 14; Control:8). NaOCl-treated sites demonstrated reosseointegration with direct bone-to-implant-contact on the previously contaminated surfaces (42% mean reosseointegration), which was significantly higher than Controls (p < 0.05). Correspondingly, clinical improvement was noted with a significant reduction in probing depth from 5.50 ± 1.24 mm at baseline to 4.46 ± 1.70 mm at 6-months postsurgery (p = 0.006). CHX-treated sites demonstrated a nonsignificant reosseointegration of 26% (p > 0.05); however, in the majority of cases, the new bone growth was at a distance from the implant surface without contact. Probing depths did not improve in the CHX group. The use of membrane did not influence reosseointegration or probing depths (all p > 0.05).

CONCLUSION

Titanium implants with peri-implantitis have the capacity to reosseointegrate following regenerative surgery. However, treatment response is contingent upon the chemotherapeutic agent selection. Additional chemical treatment with 1.5% NaOCl lead to the most favorable results in terms of changes in defect depth and percentage of reosseointegration as compared to CHX, which may hinder reosseointegration.

Reconstructive surgical therapy of peri-implant defects with ribose cross-linked collagen matrix and crosslinked hyaluronic acid - a prospective case series

OBJECTIVE

To investigate the efficacy of ribose-crosslinked collagen (RCLC) matrices functionalized by crosslinked hyaluronic acid (xHya) for reconstructive treatment of class I and III (b-c) peri-implantitis lesions in a transmucosal healing mode.

MATERIALS AND METHODS

Thirteen patients presenting with 15 implants were included in this prospective case series. Upon flap reflection, the implants were thoroughly decontaminated employing glycine powder air polishing and adjunctive sodium hypochlorite. For defect augmentation, xHyA was administered to the bony defect walls, exposed implant surfaces, and the RCLC matrix before defect grafting. The full-thickness flap was readapted and sutured around the implant neck for transmucosal healing. Baseline and respective values at the 12 months post-op evaluation were recorded for the clinical parameters peri-implant probing depth (PPD), buccal soft tissue dehiscence (BSTD) and bleeding on probing (BoP). Furthermore, two independent investigators analyzed radiographic changes in the defect area. The mean changes for all variables were analyzed with a paired t-test.

RESULTS

The initial mean PPD was 7.2 ± 1.9 mm, and BoP was present in 63% of sites. After 12 months, PPD at the latest visit was 3.2 ± 0.66 mm, which amounted to a respective 3.9 ± 1.85 mm reduction, while the BoP frequency dropped to 10% at all sites. Radiographic bone fill was accomplished for 62.8% of the former defect area, accompanied by a mean MBL gain of 1.02 mm around the treated implants (all p < 0.001).

CONCLUSIONS

Within the limits of this case series, we conclude that the proposed treatment sequence substantially improved peri-implant defects and offered a simplified but predictive technique.

CLINICAL RELEVANCE

Reconstructive treatment approaches for peri-implantitis are effective but remain non-superior to open flap debridement. Further research on novel biomaterial combinations that may improve reconstructive treatment outcomes are warranted. Ribose-crosslinked collagen matrices biofunctionalized by hyaluronic acid used in this study yield improved clinical and radiographic peri-implant conditions after 12 months.

Implant-supported prostheses following the biologically oriented preparation technique (BOPT) after implantoplasty procedures: A dental technique

Esthetic concerns may appear on implant-supported prostheses after peri-implantitis treatment, such as implantoplasty procedures that includes the thread removal and surface smoothening. A technique for restoring implants that have been treated for peri-implantitis using an implantoplasty procedure combined with the detoxification of the implant surfaces is described. The technique involves the fabrication of an implant-supported prosthesis following the biologically oriented preparation technique (BOPT) and aims to solve esthetic complications after this peri-implantitis treatment approach.

Effectiveness of mechanical and chemical decontamination methods for the treatment of dental implant surfaces affected by peri-implantitis: A systematic review and meta-analysis

OBJECTIVE

To assess which decontamination method(s) used for the debridement of titanium surfaces (disks and dental implants) contaminated with bacterial, most efficiently eliminate bacterial biofilms.

MATERIAL AND METHODS

A systematic search was conducted in four electronic databases between January 1, 2010 and October 31, 2022. The search strategy followed the PICOS format and included only in vitro studies completed on either dental implant or titanium disk samples. The assessed outcome variable consisted of the most effective method(s)-chemical or mechanical- removing bacterial biofilm from titanium surfaces. A meta-analysis was conducted, and data was summarized through single- and multi-level random effects model (p < .05).

RESULTS

The initial search resulted in 5260 articles after the removal of duplicates. After assessment by title, abstract, and full-text review, a total of 13 articles met the inclusion criteria for this review. Different decontamination methods were assessed, including both mechanical and chemical, with the most common method across studies being chlorhexidine (CHX). Significant heterogeneity was noted across the included studies. The meta-analyses only identified a significant difference in biofilm reduction when CHX treatment was compared against PBS. The remaining comparisons did not identify significant differences between the various decontamination methods.

CONCLUSIONS

The present results do not demonstrate that one method of decontamination is superior in eliminating bacterial biofilm from titanium disk and implant surfaces.

Comparative study of the effect of different exposure parameters of 635nm diode laser and toluidine blue O in eliminating Aggregatibacter actinomycetemcomitans biofilm from titanium implant surfaces

BACKGROUND

The aim of this study was to investigate the effects of antimicrobial photodynamic therapy (PDT) using 635 nm diode laser irradiation with an energy density of 6 to 30 J/cm2 and toluidine blue O (TBO) as a photosensitizer on the viability of Aggregatibacter actinomycetemcomitans attached to the surface of titanium implants.

MATERIALS AND METHODS

Titanium implants contaminated with A. actinomycetemcomitans were treated with TBO alone or in combination with different exposure parameters (light doses of 6 - 30 J/cm2 at 635 nm) and 0.2 % chlorhexidine (CHX). After treatment, colony forming units (CFUs)/ml were determined to assess PDT efficacy. The structure of the biofilm of A. actinomycetemcomitans was analyzed by field emission scanning electron microscopy (FESEM).

RESULTS

Under optimal conditions, the colony count was reduced by ∼90 %. Treatment with CHX was somewhat more effective (colony formation was reduced by ∼95 %), but this agent has adverse effects that can be avoided with PDT.

CONCLUSION

This study confirms the efficacy of PDT against A. actinomycetemcomitans depending on the light dose. Treatment with TBO + 635 nm diode laser has an effect that may be equivalent to that of CHX, but perhaps with fewer adverse effects.

Clinical Efficacy of Different Concentrations of Povidone Iodine in the Management of Peri-Implant Mucositis

Mechanical plaque control is the first line of management of peri-implant diseases. Povidone iodine is one of the broad spectrum and potent antiseptics available at various concentrations. The aim of the study was to assess and compare the efficacy of various concentrations of povidone iodine in the management of peri-implant mucositis. In the present double blinded, parallel designed, randomized clinical trial, a total of 60 patients with peri-implant mucositis (20 participants in each group [Group 1 (povidone iodine 0.1%), Group 2 (povidone iodine 2%) and Group 3 (povidone iodine 010%)] were enrolled. Scaling and root planing was done and then the peri-implant sulcus was irrigated with respective irrigant and repeated once in a week for 4 weeks. Loe and Silness Gingival Index (GI) and Mombelli Modified sulcular bleeding index (BI) were recorded at baseline and after a month and compared. Statistical analysis was done using One-way ANOVA and Tukey's HSD post hoc test. A statistically significant difference (P = 0.000) observed between the three concentrations when compared after 1 month. Also, a statistically significant difference between Group 1 and Group 3 and Group 2 and Group 3 was observed in terms of post GI (P = 0.000) and post BI (P = 0.000) but statistically no significant difference was observed between Group 1 and Group 2 in terms of post GI (P = 0.171) and post BI (P = 0.338). The 2% and 10% povidone iodine showed significant improvement in gingival index and bleeding index and hence it could be an effective adjunct to scaling and root planing in the management of peri-implant mucositis.

Physical-chemical influences and cell behavior of natural compounds on titanium dental surfaces

The present study evaluated the influence of carvacrol, terpinene-4-ol, and chlorhexidine on the physical-chemical properties of titanium surfaces, cell viability, proliferation, adhesion, and spreading of fibroblasts and osteoblasts in vitro. Titanium surfaces (Ti) were treated with Carvacrol (Cvc), Terpinen-4-ol (T4ol), Chlorhexidine (CHX), DMSO, and ultrapure water (Control group). Physical-chemical modifications were evaluated by surface wettability, the surface free energy (SFE) calculated from the contact angle values using the Owens-Wendt-Rabel-Kaeble (OWRK) equation, scanning electron microscopy (SEM) and energy dispersive spectrometry probe (EDS) system. Cells were seeded onto Ti-treated surfaces and incubated for 24 h and 72 h, then evaluated by Alamar blue assay and fluorescence microscopy. Surfaces treated with Cvc and T4ol showed the presence of Na, O, and Cl. All surfaces showed hydrophilic characteristics and SFE values between 5.5 mN/m and 3.4 mN/m. On the other hand, EDS peaks demonstrated the presence of O and Cl after CHX treatment. A reduction of cell viability and adhesion was noted on titanium surfaces treated with CHX after 24 and 72h. In conclusion, the results indicate that the decontamination with Cvc and T4ol on Ti surfaces does not alter the surface proprieties and allows an adequate interaction with cells involved in the re-osseointegration process such as fibroblasts and osteoblasts.

Mechanical and Biological Properties of Titanium and Its Alloys for Oral Implant with Preparation Techniques: A Review

Dental implants have revolutionised restorative dentistry, offering patients a natural-looking and durable solution to replace missing or severely damaged teeth. Titanium and its alloys have emerged as the gold standard among the various materials available due to their exceptional properties. One of the critical advantages of titanium and its alloys is their remarkable biocompatibility which ensures minimal adverse reactions within the human body. Furthermore, they exhibit outstanding corrosion resistance ensuring the longevity of the implant. Their mechanical properties, including hardness, tensile strength, yield strength, and fatigue strength, align perfectly with the demanding requirements of dental implants, guaranteeing the restoration's functionality and durability. This narrative review aims to provide a comprehensive understanding of the manufacturing techniques employed for titanium and its alloy dental implants while shedding light on their intrinsic properties. It also presents crucial proof-of-concept examples, offering tangible evidence of these materials' effectiveness in clinical applications. However, despite their numerous advantages, certain limitations still exist necessitating ongoing research and development efforts. This review will briefly touch upon these restrictions and explore the evolving trends likely to shape the future of titanium and its alloy dental implants.

2-DG Regulates Immune Imbalance on the Titanium Surface after Debridement

Peri-implantitis requires clinical treatments comprised of mechanical and chemical debridement to remove bacterial biofilms. Bone regeneration on the titanium surface after debridement has been a topical issue of peri-implantitis treatments. Increasing evidence has revealed that the immune microenvironment plays a key role in regulating the bone regeneration process. However, it remains unclear what kind of immune microenvironment the titanium surface induces after debridement. In the study, model titanium surface after debridement was prepared via biofilm induction and mechanical and chemical debridement in vitro. Then, the macrophages and naïve CD4⁺ T lymphocytes were cultured on the titanium surface after debridement for immune microenvironment evaluation, with the original titanium surface as the control. Next, to regulate the immune microenvironment, 2-DG, a glycolysis inhibitor, was further incorporated to regulate macrophages and CD4⁺ T lymphocytes at the same time. Surface characterization results showed that the bacterial biofilms were completely removed, while the micro-morphology of titanium surface altered after debridement, and the element composition did not change. Compared with the original titanium disc, titanium surface after debridement can lead to the inflammatory differentiation of macrophages and CD4⁺ T lymphocytes. The percentage of M1 and Th17 inflammatory cells and the expression of their inflammatory factor genes are upregulated. However, 0.3 mmol of 2-DG can significantly reduce the inflammatory differentiation of both macrophages and CD4⁺ T lymphocytes and inhibit their expression of inflammatory genes. In conclusion, although bacterial biofilms were removed from titanium surface after debridement, the surface topography changes could still induce immune imbalance and form an inflammatory immune microenvironment. However, this inflammatory immune microenvironment can be effectively reversed by 2-DG in vitro, thus creating an immune microenvironment conducive to osteogenesis, which might provide a new perspective for future therapy of peri-implantitis.

Influence of eight debridement techniques on three different titanium surfaces: A laboratory study

OBJECTIVES

Debridement methods may damage implant surfaces. This in vitro study investigated eight debridement protocols across three implant surfaces to assess both biofilm removal and surface alterations.

MATERIAL AND METHODS

One hundred sixty commercially pure titanium discs were treated to simulate commercially available titanium implant surfaces-smooth, abraded and abraded and etched. Following inoculation with whole human saliva to create a mixed species biofilm, the surfaces were treated with eight debridement methods currently used for clinical peri-implantitis (n = 10). This included air abrasion using powders of glycine, sodium bicarbonate and calcium carbonate; conventional mechanical methods-piezoelectric scaler, carbon and stainless steel scalers; and a chemical protocol using 40% citric acid. Following treatment, remaining biofilm was analysed using scanning electron microscopy and crystal violet assays. For statistical analysis, ANOVA was applied (p < 0.05).

RESULTS

All debridement techniques resulted in greater than 80% reduction in biofilm compared with baseline, irrespective of the surface type. Glycine powder delivered through an air polishing system eliminated the most biofilm. Mechanical instruments were the least effective at eliminating biofilm across all surfaces and caused the greatest surface alterations. Citric acid was comparable with mechanical debridement instruments in terms of biofilm removal efficacy. Titanium surfaces were least affected by air abrasion protocols and most affected by mechanical methods.

CONCLUSIONS

Mechanical protocols for non-surgical debridement should be approached with caution. Glycine powder in an air polisher and 40% citric acid application both gave minimal alterations across all implant surfaces, with glycine the superior method in terms of biofilm removal.

Intrinsic antibacterial and osteoinductive sterosomes promote infected bone healing

Open fractures and internal fixation implants are often accompanied by bacterial infection, leading to osteomyelitis, characterized by intractable bone infection and sequestrum formation, and can result in lifelong disability or fatal sepsis. As common clinical treatment strategies, high-dose antibiotic application and autologous bone transplantation face the risk of recurrence and donor site injury. Herein, we designed and prepared a novel drug delivery system by rational selection of the antibacterial single-chain amphiphile (cetylpyridinium chloride, CPC) and osteoinductive sterol (20S-hydroxycholesterol, Oxy) to formulate CPC/Oxy sterosomes. We demonstrate their excellent biocompatibility and antibacterial ability through 2D and 3D settings in vitro. In addition, the osteogenic differentiation of bone marrow mesenchymal stem cells was investigated in cell monolayers and a hydrogel environment. Moreover, a rat infected critical-sized calvarial defect model was employed to illustrate the effects of antibacterial and osteogenic CPC/Oxy sterosomes in vivo. Our results showed that CPC/Oxy sterosomes not only exterminated bacterial infections, but also enhanced calvarial healing without additional antibiotics, bone formation promoters or exogenous cells. This research provides a promising and effective multifunctional sterosomal platform for the treatment of infected bone defects, with the potential to be combined with therapeutic genes, and small molecule drugs.

Debridement of contaminated implants using air-polishing coupled with pH-responsive maximin H5-embedded metal-organic frameworks

The primary goal of peri-implantitis treatments remains the decontamination of implant surfaces exposed to polymicrobial biofilms and renders biocompatibility. In this study, we reported a synergistic strategy for the debridement and re-osteogenesis of contaminated titanium by using erythritol air abrasion (AA) coupled with an as-synthesized pH-responsive antimicrobial agent. Here, the anionic antibacterial peptide Maximin H5 C-terminally deaminated isoform (MH5C) was introduced into the Zeolitic Imidazolate Frameworks (ZIF-8) via a one-pot synthesis process. The formed MH5C@ZIF-8 nanoparticles (NPs) not only possessed suitable stability, but also guarantee the slow-release effect of MH5C. Antibacterial experiments revealed that MH5C@ZIF-8 NPs exhibited excellent antimicrobial abilities toward pathogenic bacteria of peri-implantitis, confirming ZIF-8 NPs as efficient nanoplatforms for delivering antibacterial peptide. To evaluate the comprehensive debridement efficiency, single-species as well as mixed-species biofilms were successively established on commercially used titanium surfaces and decontaminated with different methods: removed only by erythritol air abrasion, treated merely with MH5C@ZIF-8 NPs, or received both managements. The results demonstrated that only erythritol air abrasion accompanied with MH5C@ZIF-8 NPs at high concentrations eliminated almost all retained bacteria and impeded biofilm rehabilitation, while neither erythritol air abrasion nor MH5C@ZIF-8 NPs alone could achieve this. Subsequently, we evaluated the re-osteogenesis on previously contaminated surfaces which were treated with different debridement methods afterwards. We found that cell growth and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) in the group received both treatments (AA + MH5C@ZIF-8) were higher than those in other groups. Our work emphasized the great potential of the synergistic therapy as a credible alternative for removing microorganisms and rendering re-osseointegration on contaminated implant surfaces, boding well for the comprehensive applications in peri-implantitis treatments.

In-Vitro Biofilm Removal Efficacy Using Water Jet in Combination with Cold Plasma Technology on Dental Titanium Implants

Peri-implantitis-associated inflammation can lead to bone loss and implant failure. Current decontamination measures are ineffective due to the implants' complex geometry and rough surfaces providing niches for microbial biofilms. A modified water jet system (WaterJet) was combined with cold plasma technology (CAP) to achieve superior antimicrobial efficacy compared to cotton gauze treatment. Seven-day-old multi-species-contaminated titanium discs and implants were investigated as model systems. The efficacy of decontamination on implants was determined by rolling the implants over agar and determining colony-forming units supported by scanning electron microscopy image quantification of implant surface features. The inflammatory consequences of mono and combination treatments were investigated with peripheral blood mononuclear cell surface marker expression and chemokine and cytokine release profiles on titanium discs. In addition, titanium discs were assayed using fluorescence microscopy. Cotton gauze was inferior to WaterJet treatment according to all types of analysis. In combination with the antimicrobial effect of CAP, decontamination was improved accordingly. Mono and CAP-combined treatment on titanium surfaces alone did not unleash inflammation. Simultaneously, chemokine and cytokine release was dramatically reduced in samples that had benefited from additional antimicrobial effects through CAP. The combined treatment with WaterJet and CAP potently removed biofilm and disinfected rough titanium implant surfaces. At the same time, non-favorable rendering of the surface structure or its pro-inflammatory potential through CAP was not observed.

Antimicrobial efficiency and cytocompatibility of different decontamination methods on titanium and zirconium surfaces

OBJECTIVES

The purpose of this study was to investigate the efficiency of different implant-decontamination methods regarding biofilm modification and potential cytotoxic effects. Therefore, the amount of biofilm reduction, cytocompatibility, and elementary surface alterations were evaluated after decontamination of titanium and zirconium surfaces.

MATERIAL AND METHODS

Titanium and zirconium disks were contaminated with a newly developed high-adherence biofilm consisting of six microbial species. Decontaminations were performed using titanium curette, stainless steel ultrasonic scaler (US), glycine (GPAP) and erythritol (EPAP) powder air-polishing, Er:YAG laser, 1% chlorhexidine (CHX), 10% povidone-iodine (PVI), 14% doxycycline (doxy), and 0.95% NaOCl solution. Microbiologic analysis was done using real-time qPCR. For assessment of cytocompatibility, a multiplex assay for the detection of cytotoxicity, viability, and apoptosis on human gingival fibroblasts was performed. X-ray photoelectron spectroscopy (XPS) was used to evaluate chemical alterations on implant surfaces.

RESULTS

Compared with untreated control disks, only GPAP, EPAP, US, and Er:YAG laser significantly reduced rRNA counts (activity) on titanium and zirconium (p < .01), whereas NaOCl decreased rRNA count on titanium (p < .01). Genome count (bacterial presence) was significantly reduced by GPAP, EPAP, and US on zirconium only (p < .05). X-ray photoelectron spectroscopy analyses revealed relevant re-exposure of implant surface elements after GPAP, EPAP, and US treatment on both materials, however, not after Er:YAG laser application. Cytocompatibility was impaired by CHX, PVI, doxy, and NaOCl. CHX and PVI resulted in the lowest viability and doxy in the highest apoptosis.

CONCLUSIONS

Within the limits of this in vitro study, air-polishing methods and ultrasonic device resulted in effective biofilm inactivation with surface re-exposure and favorable cytocompatibility on titanium and zirconium. Chemical agents, when applied on implant surfaces, may cause potential cytotoxic effects.

Surface Free Energy and Composition Changes and Ob Cellular Response to CHX-, PVPI-, and ClO2-Treated Titanium Implant Materials

The study evaluated the interaction of a titanium dental implant surface with three different antibacterial solutions: chlorhexidine, povidone-iodine, and chlorine dioxide. Implant surface decontamination is greatly challenging modern implant dentistry. Alongside mechanical cleaning, different antibacterial agents are widely used, though these could alter implant surface properties. Commercially pure (CP) grade 4 titanium (Ti) discs were treated with three different chemical agents (chlorhexidine 0.2% (CHX), povidone-iodine 10% (PVPI), chlorine dioxide 0.12% (ClO₂)) for 5 min. Contact angle measurements, X-ray photoelectron spectroscopy (XPS) analysis, and cell culture studies were performed. Attachment and proliferation of primary human osteoblast cells were investigated via MTT (dimethylthiazol-diphenyl tetrazolium bromide), alamarBlue, LDH (lactate dehydrogenase), and fluorescent assays. Contact angle measurements showed that PVPI-treated samples (Θ = 24.9 ± 4.1) gave no difference compared with controls (Θ = 24.6 ± 5.4), while CHX (Θ = 47.2 ± 4.1) and ClO₂ (Θ = 39.2 ± 9.8) treatments presented significantly higher Θ values. All samples remained in the hydrophilic region. XPS analysis revealed typical surface elements of CP grade 4 titanium (Ti, O, and C). Both MTT and alamarBlue cell viability assays showed similarity between treated and untreated control groups. The LDH test revealed no significant difference, and fluorescent staining confirmed these results. Although there was a difference in surface wettability, a high proliferation rate was observed in all treated groups. The in vitro study proved that CHX, PVPI, and ClO₂ are proper candidates as dental implant decontamination agents.

Preventing Peri-implantitis: The Quest for a Next Generation of Titanium Dental Implants

Titanium and its alloys are frequently the biomaterial of choice for dental implant applications. Although titanium dental implants have been utilized for decades, there are yet unresolved issues pertaining to implant failure. Dental implant failure can arise either through wear and fatigue of the implant itself or peri-implant disease and subsequent host inflammation. In the present report, we provide a comprehensive review of titanium and its alloys in the context of dental implant material, and how surface properties influence the rate of bacterial colonization and peri-implant disease. Details are provided on the various periodontal pathogens implicated in peri-implantitis, their adhesive behavior, and how this relationship is governed by the implant surface properties. Issues of osteointegration and immunomodulation are also discussed in relation to titanium dental implants. Some impediments in the commercial translation for a novel titanium-based dental implant from "bench to bedside" are discussed. Numerous in vitro studies on novel materials, processing techniques, and methodologies performed on dental implants have been highlighted. The present report review that comprehensively compares the in vitro, in vivo, and clinical studies of titanium and its alloys for dental implants.

Comparison of Different Chemical and Mechanical Modalities for Implant Surface Decontamination: Activity against Biofilm and Influence on Cellular Regrowth—An In Vitro Study

Objectives

The aim of this in vitro study was to compare the efficacy of chemical and mechanical methods for decontamination of titanium dental implant surfaces previously infected with polymicrobial biofilms in a model simulating a peri-implant defect. Furthermore, the effect of each decontamination protocol on MG-63 osteoblast-like cells morphology and adhesion to the treated implants was assessed.

Background

Peri-implantitis is a growing issue in dentistry, and evidence about implant surface decontamination procedures is lacking and inconclusive.

Methods

A total of 40 previously biofilm-contaminated implants were placed into a custom-made model simulating a peri-implant defect and randomly assigned to five treatment groups: (C) control (no treatment); (AW) air abrasion without any powder; (ESC) air abrasion with powder of erythritol, amorphous silica, and 0.3% chlorhexidine; (HBX) decontamination with a sulfonic/sulfuric acid solution in gel; and (HBX + ESC) a combination of HBX and ESC. Microbiological analysis was performed on five implants per treatment group, and the residual viable bacterial load measured in log 10 CFU/mL was counted for each bacterial strain and for the total number of colonies. The remaining three implants per group and three noncontaminated (NC) implants were used to assess surface biocompatibility using a scanning electron microscope and a backscattered electron microscope after seeding with MG-63 cells.

Results

A significant decontaminant effect was achieved using HBX or HBX + ESC, while no differences were observed among other groups. The percentage of implant surface covered by adherent MG-63 cells was influenced by the treatment method. Progressive increases in covered surfaces were observed in groups C, AW, ESC, HBX, HBX + ESC, and NC.

Conclusions

A combination of mechanical and chemical decontamination may provide more predictable results than mechanical cleaning alone.

Adjunctive Application of Hyaluronic Acid in Combination with a Sodium Hypochlorite Gel for Non-Surgical Treatment of Residual Pockets Reduces the Need for Periodontal Surgery-Retrospective Analysis of a Clinical Case Series

The comprehensive treatment of periodontitis stage 2 to 4 aims at the resolution of periodontal inflammation and “pocket closure”, which implies a residual probing depth of ≤4 mm and a negative BoP. However, supportive periodontal therapy (SPT) regularly leaves behind persistent periodontal pockets with 5 or more mm in residual PPD and sites that often re-colonize and re-infect. Various adjunctive options for subgingival instrumentation have been proposed to enhance the antimicrobial effects to better control the re-infection of these residual sites. The locally applied adjuncts, based on their anti-inflammatory effect, are sodium hypochlorite antiseptic cleaning gel and cross-linked hyaluronic acid (xHyA). Both recently moved into the focus of clinical research on non-surgical and surgical therapy for periodontitis. The surgical use of xHyA indicates regenerative potential, supporting periodontal regeneration. This case series retrospectively analyzes the clinical benefits of the consecutive flapless application of sodium-hypochlorite-based cleaning gel and xHyA at the SPT to achieve pocket closure, thereby reducing the need for periodontal surgery. In 29 patients, 111 sites received the treatment sequence. At 6-month re-evaluation, an overall PPD reduction exceeding 2 mm was achieved, associated with a similar CAL gain (2.02 mm); the bleeding tendency (BoP) was reduced by >60%. Pocket closure occurred in almost 25% of all the sites. Within their limits, the present data suggest that the proposed combined adjunctive treatment of residual active periodontal sites yielded significant improvement in the clinical parameters. Further studies in RCT format are required to confirm these observations.

Comparison of antibacterial and antibiofilm activity of bioactive glass compounds S53P4 and 45S5

Background

Bone loss and deformation due to damage caused by injury or recurrent invasive infections presents a major clinical obstacle. While bone substitute biomaterials promote osseous tissue regeneration, their application in sites complicated by microbial infections such as osteomyelitis, is limited. Bioactive glass biomaterials (Bioglass) have been shown to have efficient mechanisms of repairing the integrity of bone, while inhibiting growth of a range of bacterial strains. There are several commercially available bioactive glass compounds, each with a unique chemical composition. One compound in particular, S53P4, has demonstrated antimicrobial effects in previous studies but the antimicrobial activity of the parent compound 45S5 has not been investigated.

Results

To assess whether antimicrobial activity is common among bioglass compounds, 45S5-the parent compound, was evaluated in comparison to S53P4 for antibacterial and antibiofilm effects against multiple strains of aerobic and anaerobic bacteria associated with various types of osteomyelitis. Experiments of antimicrobial effects in liquid cultures demonstrated that both compounds were antimicrobial against various microbial genera including S. gordonii, V. parvula, P. aeruginosa and MRSA; particles of the smallest size (32–125 µm) invariably showed the most robust antimicrobial capabilities. When employed against biofilms ecological biofilms grown on hydroxyapatite, 45S5 particles produced a stronger reduction in biofilm mass compared to S53P4 particles when considering small particle ranges.

Conclusion

We found that 45S5 seems to be as effective as S53P4 and possibly even more capable of limiting bacterial infections. The efficacy of bioactive glass was not limited to inhibition of planktonic growth, as it also extended to bacterial biofilms. The increased antibacterial activity of 45S5 compared to S53P4 is true for a variety of size ranges.

Efficiency of biofilm removal by combination of water jet and cold plasma: an in-vitro study

Background

Peri-implantitis therapy is a major problem in implantology. Because of challenging rough implant surface and implant geometry, microorganisms can hide and survive in implant microstructures and impede debridement. We developed a new water jet (WJ) device and a new cold atmospheric pressure plasma (CAP) device to overcome these problems and investigated aspects of efficacy in vitro and safety with the aim to create the prerequisites for a clinical pilot study with these medical devices.

Methods

We compared the efficiency of a single treatment with a WJ or curette and cotton swab (CC) without or with adjunctive use of CAP (WJ + CAP, CC + CAP) to remove biofilm in vitro from rough titanium discs. Treatment efficacy was evaluated by measuring turbidity up to 72 h for bacterial re-growth or spreading of osteoblast-like cells (MG-63) after 5 days with scanning electron microscopy. With respect to application safety, the WJ and CAP instruments were examined according to basic regulations for medical devices.

Results

After 96 h of incubation all WJ and CC treated disks were turbid but 67% of WJ + CAP and 46% CC + CAP treated specimens were still clear. The increase in turbidity after WJ treatment was delayed by about 20 h compared to CC treatment. In combination with CAP the cell coverage significantly increased to 82% (WJ + CAP) or 72% (CC + CAP), compared to single treatment 11% (WJ) or 10% (CC).

Conclusion

The newly developed water jet device effectively removes biofilm from rough titanium surfaces in vitro and, in combination with the new CAP device, biologically acceptable surfaces allow osteoblasts to grow. WJ in combination with CAP leads to cleaner surfaces than the usage of curette and cotton swabs with or without subsequent plasma treatment. Our next step will be a clinical pilot study with these new devices to assess the clinical healing process.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-022-02195-1.

Effectiveness of Different Chemotherapeutic Agents for Decontamination of Infected Dental Implant Surface: A Systematic Review

Aim: To evaluate the most effective chemotherapeutic agent for decontamination of infected dental implants. Material and methods: A systematic electronic literature search in MEDLINE (PubMed) and Google scholar between January 2010 to December 2021 was carried out by using the PRISMA guidelines. A total of five studies related to chemical decontamination of the dental implant were evaluated. The search strategy was based on the PICOS framework. Randomized controlled trials (RCT’s) and cohort studies evaluating the effectiveness of different chemotherapeutic agents for the decontamination of dental implants were included in the study. The outcome variable examined was the most effective chemotherapeutic agent(s) for dental implant surface decontamination after comparing the chemotherapeutic agents used in the qualifying studies. Result: Out of the basic database of 1564 records, 1380 articles were excluded due to irrelevance, unavailability, and repetition. Furthermore, 134 articles were excluded from 184 studies for various reasons. After further filtration, 13 studies were shortlisted. Two investigators (SSA and SA) appraised the quality of the selected studies using the risk of bias assessment tool. After excluding eight studies, five articles were finally included in the present systematic review. Conclusion: The data reported for the efficacy of chemotherapeutic agents in cleaning contaminated titanium surfaces are scarce, thus it is not possible to draw a definite conclusion. However, chlorhexidine (CHX) (0.2%, 0.12%), citric acid (40%) and sodium hypochlorite (1%) are the most commonly used chemotherapeutic agents; amongst them, citric acid showed the highest potential for biofilm removal from the contaminated implant surface. All three agents [CHX (0.2%, 0.12%), citric acid (40%), and sodium hypochlorite (1%)] can be recommended as therapeutic agents along with their curbs.

Study on the immunopathological effect of titanium particles in peri-implantitis granulation tissue: a case-control study

Objectives

To identify titanium particles (TPs) in biopsy specimens harvested from peri‐implantitis lesions and secondarily to study the histopathological characteristics in peri‐implantitis compared to periodontitis, in order to evaluate whether the presence of TPs could alter respective inflammatory patterns.

Material and methods

Biopsies containing granulation tissue were harvested during routine surgical treatment in 39 peri‐implantitis cases and 35 periodontitis controls. Serial sections were obtained using titanium‐free microtome blades. The first and last sections of the peri‐implantitis specimens were used for identification of TPs by scanning electron microscopy coupled with dispersive X‐ray spectrometry. Intermediate sections and periodontitis specimens were processed for descriptive histological study using haematoxylin–eosin staining and for immunohistochemical analysis using CD68, IL‐6, Nf‐kB and VEGF markers.

Results

TPs were identified in all peri‐implantitis specimens as free metal bodies interspersed within granulation tissue. However, presence of macrophages or multinucleated giant cells engulfing the TPs were not identified in any specimen. Peri‐implantitis granulations were characterized by a chronic inflammatory infiltrate rich in neutrophils. About half of peri‐implantitis patients exhibited a subacute infiltrate characterized with lymphocytes interweaved with neutrophils and eosinophils. When compared to periodontitis, peri‐implantitis tissues showed higher proportions of macrophages and a more intense neovascularization, based on significantly higher expression of CD68 and VEGF respectively.

Conclusion

TPs were identified in all peri‐implantitis specimens, but without evidencing any foreign body reaction suggestive for direct pathological effects of TPs. The peri‐implantitis granulation tissue was characterized by intense neovascularization and presence of a chronic inflammatory infiltrate dominated by plasma cells, neutrophils and macrophages.

"Dual-functional" strontium titanate nanotubes designed based on fusion peptides simultaneously enhancing anti-infection and osseointegration

Currently, there is an increasing clinical demand for implants that effectively resist bacterial infections while promoting osseointegration. In this study, the fusion peptide technology was used to linearly fuse the antimicrobial peptide (AMP, HHC36) and the bone-promoting peptide (RGD), so that the titanium (Ti)-based implant modified by the polypeptide had the dual function of "antibacterial-promoting bone". Firstly, self-organized vertically-oriented strontium-doped titanium dioxide nanotubes (STN) were manufactured by anodizing and hydrothermal synthesis methods. Secondly, the fusion peptide (HHC36-RGD) was loaded into the tubular structure by a simple vacuum-assisted physical adsorption method. Finally, STN loaded with HHC36-RGD (H-R-STN) was obtained. The characterization results demonstrated that the surface of the H-R-STN had a roughness and hydrophilicity that promoted cell adhesion. Additionally, electrochemical tests showed that H-R-STN coating can reduce the corrosion rate of pure Ti. The fusion peptide and Sr²⁺ in H-R-STN were released in the initial fast and subsequent slow kinetic model. Expected, H-R-STN can kill more than 99% of clinically common pathogenic bacteria (Staphylococcus aureus and Escherichia coli), and significantly inhibit the formation of bacterial biofilms. Simultaneously, under the synergistic effect of RGD in the fusion peptide and strontium in STN, H-R-STN markedly promoted the adhesion and proliferation of mouse osteoblasts, and significantly promoted osteogenic markers (alkaline phosphatase, runt-related transcription, collagen, mineralization) expression. In summary, the bifunctional titanium-based implant constructed by H-R-STN in this article can effectively prevent bacterial infections and promote early osseointegration. The main advantage of the titanium surface treatment method of the study was that its simplicity, low cost, especially its versatility made it a promising anti-infective bone repair material.

Efficacy of titanium brush, 915 nm diode laser, citric acid for eradication of Staphylococcus aureus from implant surfaces

BACKGROUND

This study aimed to assess the efficacy of titanium brush, 915 nm diode laser, citric acid and the combination of latter two with titanium brush for decontamination of SLA surface mini-implants.

METHODS

Seventy-five mini-implants contaminated with Staphylococcus aureus (S. aureus) were randomly divided into five experimental groups (n = 12) of titanium brush (TiB), laser, citric acid (CA), brush-laser, and brush-acid, positive [n = 12; chlorhexidine mouthwash (CHX)] and negative [n = 2; phosphate buffered saline (PBS)] control groups and one no-treatment group (n = 1). After counting the colony forming units (CFUs), data were analyzed using the Kruskal-Wallis and Dunn post-hoc tests.

RESULTS

Regardless of the no-treatment and negative control groups, maximum and minimum CFUs were noted in the titanium brush and positive control groups. After CHX, minimum CFUs were noted in brush-acid group followed by brush-laser, laser, and acid groups. Generally, the Kruskal-Wallis test revealed a significant difference between the groups regarding the colony count (P < 0.001). Dunn post-hoc test showed that the difference between the titanium brush and acid-brush group was significant (P < 0.001) while the differences between the brush and laser groups with the brush-laser group were not significant (P > 0.077).

CONCLUSIONS

Combined use of titanium brush and citric acid yielded superior results compared to other groups in reduction of S. aureus on implant surface.

In vitro evaluation of chemical decontamination of titanium discs

Peri-implant diseases are caused by bacterial biofilm colonizing implant surfaces. Prevention and management of peri-implant mucositis and peri-implantitis rely on effective biofilm removal. This study aimed to evaluate biofilm removal and cytocompatibility following chemo-mechanical surface decontamination of biofilm-coated titanium discs. Biofilm-coated (Streptococcus gordonii) discs, with either non-modified (smooth) or modified (rough) surfaces, were instrumented using a sterile gauze soaked in one out of four solutions: saline (NaCl), alkaline electrized water (AEW), citric acid (CA) or N-acetyl-l-cysteine (NAC). Non-contaminated, untreated titanium discs served as controls (C). Residual deposits (bacteria and gauze fibers) and cytocompatibility for osteoblast-like cells were evaluated using SEM and immunofluorescence. Cytotoxicity was assessed using WST-8 assay and immunofluorescence. All protocols were equally effective in removing bacteria from smooth surfaces, while AEW and CA were found to be superior at rough surfaces. AEW and NAC were superior in promoting cytocompatibility over NaCl. NAC and CA had a strong cytotoxic effect on osteoblast-like and fibroblast cells. In conclusion, AEW may be beneficial in the decontamination of implant surfaces, effectively removing bacterial biofilm and restoring cytocompatibility.

A novel chlorhexidine-hexametaphosphate coating for titanium with antibiofilm efficacy and stem cell cytocompatibility

Dental implants are an increasingly popular way to replace missing teeth. Whilst implant survival rates are high, a small number fail soon after placement, with various factors, including bacterial contamination, capable of disrupting osseointegration. This work describes the development of chlorhexidine-hexametaphosphate coatings for titanium that hydrolyse to release the antiseptic agent chlorhexidine. The aim was to develop a coating for titanium that released sufficient chlorhexidine to prevent biofilm formation, whilst simultaneously maintaining cytocompatibility with cells involved in osseointegration. The coatings were characterised with respect to physical properties, after which antibiofilm efficacy was investigated using a multispecies biofilm model, and cytocompatibility determined using human mesenchymal stem cells. The coatings exhibited similar physicochemical properties to some implant surfaces in clinical use, and significantly reduced formation of multispecies biofilm biomass up to 72 h. One coating had superior cytocompatibility, with mesenchymal stem cells able to perform normal functions and commence osteoblastic differentiation, although at a slower rate than those grown on uncoated titanium. With further refinement, these coatings may have application in the prevention of bacterial contamination of dental implants at the time of surgery. This could aid a reduction in rates of early implant failure.

Impact of tribocorrosion and titanium particles release on dental implant complications - A narrative review

Titanium particles as a product of degradation have been detected in periimplant oral tissues and it has been assumed that implants were the source of these particles. Periimplantitis sites had higher concentrations of particles in comparison to healthy implant sites. Several factors have been identified in the degradation of dental implant surface, such as mechanical wear, contact with chemical agents, and the effects of biofilm adhesion. Titanium particles silently prompt the immune-system activation and generate a pro-inflammatory response in macrophages, T lymphocytes and monocytes. During the activation, inflammatory cytokines are released including, granulocyte-macrophage colony-stimulating factor (GM-CSF), prostaglandin, and TNF-α, IL-1β, IL-6. The nanoparticles depict unique features such as high level of biological reactivity and potentially harmful compared to microparticles since they have a relatively greater surface area to volume ratio. Allergic response to titanium as a cause of implant failure has not been well documented. Evidence demonstrating biological complication due to titanium particles release includes peri-implant tissue inflammation that lead terminally to implant loss. There is a biological probability for a relation between the presence of titanium particles and ions, biological complication, and corrosion, but there is no justifiable evidence for unidirectional series of causative actions.

Microbial Biofilm Decontamination on Dental Implant Surfaces: A Mini Review

Introduction

After insertion into the bone, implants osseointegrate, which is required for their long-term success. However, inflammation and infection around the implants may lead to implant failure leading to peri-implantitis and loss of supporting bone, which may eventually lead to failure of implant. Surface chemistry of the implant and lack of cleanliness on the part of the patient are related to peri-implantitis. The only way to get rid of this infection is decontamination of dental implants.

Objective

This systematic review intended to study decontamination of microbial biofilm methods on titanium implant surfaces used in dentistry.

Methods

The electronic databases Springer Link, Science Direct, and PubMed were explored from their inception until December 2020 to identify relevant studies. Studies included had to evaluate the efficiency of new strategies either to prevent formation of biofilm or to treat matured biofilm on dental implant surfaces.

Results and Discussion

In this systematic review, 17 different groups of decontamination methods were summarized from 116 studies. The decontamination methods included coating materials, mechanical cleaning, laser treatment, photodynamic therapy, air polishing, anodizing treatment, radiation, sonication, thermal treatment, ultrasound treatment, chemical treatment, electrochemical treatment, antimicrobial drugs, argon treatment, and probiotics.

Conclusion

The findings suggest that most of the decontamination methods were effective in preventing the formation of biofilm and in decontaminating established biofilm on dental implants. This narrative review provides a summary of methods for future research in the development of new dental implants and decontamination techniques.

Mussel-inspired self-assembly engineered implant coatings for synergistic anti-infection and osteogenesis acceleration

Implant associated infections (IAI) and poor osseointegration are the two major causes for titanium implant failure, leading to subsequent financial burden and physical sufferings. Therefore, advanced implants with excellent anti-infection and osseointegration performance are needed. In this work, mussel-inspired tannic acid (TA) mediated layer-by-layer (LbL) self-assembly was used for fabricating bonded polyethylene glycol (PEG) and 8DSS (8 repeating units of aspartate-serine-serine) coatings (Ti/8DSS/PEG) on the surface of titanium implants. The coating is designed to simultaneously reduce bacterial adhesion through the super-hydrophilic effect of PEG and promote osseointegration through the effective biomineralization of 8DSS. The obtained Ti/8DSS/PEG implant exhibits superior anti-biofouling capabilities (anti-protein adhesion and anti-bacterial adhesion against S. aureus and E. coli) and excellent biocompatibility. Meanwhile, the Ti/8DSS/PEG implant accelerates osteoblast differentiation and presents significantly better osteogenic ability than bare titanium implants in vivo. This mussel-inspired TA mediated LbL self-assembly method is expected to provide a multifunctional and robust platform for surface engineering in bone repair.

The Effects of Three Chlorhexidine-Based Mouthwashes on Human Osteoblast-Like SaOS-2 Cells. An In Vitro Study

Several decontamination methods for removing biofilm from implant surfaces during surgical peri-implantitis treatment have been reported, including the intraoperative usage of chlorhexidine (CHX)-based antiseptics. There is a lack of information on possible adverse effects on bone healing. The study aimed to examine the impact of three CHX-based mouthwashes on osteoblast-like cells (SaOS-2) in vitro. Cells were cultured for three days in 96-well binding plates. Each well was randomly treated for either 30, 60 or 120 s with 0.05% CHX combined with 0.05% cetylpyridinium chloride (CPC), 0.1% CHX, 0.2% CHX or sterile saline (NaCl) as control. Cell viability, cytotoxicity and apoptosis were assessed at day 0, 3 and 6. Cell viability resulted in being higher in the control group at all time points. At day 0, the CHX 0.2 group showed significantly higher cytotoxicity values compared to CHX 0.1 (30 s), CHX + CPC (30 s, 60 s and 120 s) and control (60 s and 120 s), while no significant differences were identified between CHX + CPC and both CHX 0.1 and NaCl groups. All test mouthwashes were found to induce apoptosis to a lower extent compared to control. Results indicate that 0.2% CHX presented the highest cytotoxic effect. Therefore, its intraoperative use should be carefully considered.

The In Vitro Evaluation of Preosteoblast Migration From 3-D-printed Scaffolds to Decontaminated Smooth and Minimally Rough Titanium Surfaces: A Pilot Study

In vitro evaluations are essential to gaining a better understanding of re-osseointegration, while reducing animal use and the overall costs of peri-implantitis studies. This pilot study evaluated preosteoblast migration from 3-D-printed scaffolds to decontaminated titanium microimplants, creating a system that tries to mimic the bone-implant interface. Smooth (S) and minimally rough (R) titanium microimplants were incubated in Escherichia coli cultures and divided into six groups according to the decontamination protocol applied: EDTA gel (EDTA); chlorhexidine (CHL); chlorhexidine-soaked gauze (GCHL); scaling (SC); titanium brush (TiB); and implantoplasty (IP). Pristine S and R microimplants were used as the controls (C). After the decontamination procedures, the microimplants were inserted in 3-D-printed polyurethane-based scaffolds previously inoculated with preosteoblast cell cultures. Cellular migration was assessed after 24, 72 and 120 hours by ATP quantification. At the 120-hour time point, there was no statistically significant difference between S-C, S-EDTA, S-CHL, S-GCHL and S-SC (p > 0.05), and between R-C, R-EDTA and R-GCHL (p > 0.05). The in vitro model developed in this pilot study successfully demonstrated cell migration on the different decontaminated surfaces. This methodology suggests that on smooth microimplants, EDTA, GCHL, SC and TiB decontamination may have a reduced impact on preosteoblast migration, while on minimally rough microimplants, EDTA and GCHL decontamination affected cell migration the least. However, when selecting a decontamination protocol, the effectiveness of the decontamination per se must also be considered.

Investigating the Antioxidant and Cytocompatibility of Mimusops elengi Linn Extract over Human Gingival Fibroblast Cells

Background-chlorhexidine (CHX) is most commonly used as a chemical plaque control agent. Nevertheless, its adverse effects, including teeth discoloration, taste alteration and calculus build-up, limit its use and divert us to medicinal herbs. The purpose of the study was to evaluate the phytochemical composition, antioxidant potential, and cytotoxic effects of Mimusops elengi Linn extract (ME) over normal human cultured adult gingival fibroblasts (HGFs). Methods-in vitro phytochemical screening, total flavonoid content, antioxidant potential by DPPH and Nitric Oxide (NO) radical scavenging activity, and cytotoxic effects of ME extracts over HGF were explored. The viability of HGF cells was determined using 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT), neutral red uptake, and trypan blue assay after treatment with different concentrations of CHX and ME (0.3125 to 10 µg/mL). Results-ME showed some alkaloids, glycosides, saponins and flavonoids exhibited relatively moderate-to-good antioxidant potential. Increasing the concentration of CHX and ME from 0.3125 to 10 µg/mL reduced cell viability from 29.71% to 1.07% and 96.12% to 56.02%, respectively. At higher concentrations, CHX reduced the viability of cells by 52.36-fold compared to ME, revealed by MTT assay. At 10 µg/mL concentration, the mean cell viability of CHX and ME-treated cells was 2.24% and 57.45%, respectively, revealed by a neutral red assay. The viability of CHX- and ME-treated HGF cells estimated at higher concentrations (10 µg/mL) using trypan blue assay was found to be 2.18% and 47.36%, respectively. A paired t-test showed significance (p < 0.05), and one-way ANOVA difference between the mean cell viability of CHX- and ME-treated cells at different concentrations. One-way ANOVA confirmed the significant difference between the viability of CHX- and ME-treated cells. Conclusions-The cytoprotective and antioxidant effects of ME emphasize its potential benefits. Therefore, it could emerge as a herbal alternative and adjunct to conventional oral hygiene methods, that can diminish periodontal tissue destruction.

Cytocompatibility Properties of an Herbal Compound Solution Support I n vitro Wound Healing

The aim of this study was to evaluate the cytocompatibility of an herbal extract compound oral rinse [StellaLife VEGA (SLife)] against relevant human cellular models of oral surgical wound healing. SL was compared to the gold standard for peri-/post-operative oral surgical use, i.e., Chlorhexidine (CHX) and to a commonly utilized essential-oil (EO) based antiseptic rinse. Fibroblasts and primary oral stem cells of the apical papilla (SCAPs) were employed to assess its comparative cytotoxicity to the active comparator antiseptic rinses and its effects on wound healing in vitro. In cytotoxicity assays, multiple timepoints were tested ranging from clinically relevant of 60-s rinsing to protracted challenge of up to 5 min, to determine dose-dependent toxicity. The SLife group consistently demonstrated minimal cytotoxicity as compared to active comparators across experimental timepoints and different cells lines. At concentrations up to 20% v/v SLife-challenged fibroblasts and SCAPs demonstrated no significant toxicity as compared to unstimulated controls (p > 0.05). When assessing wound healing, a scratch wound assay revealed significantly accelerated cell migration for SLife as compared to CHX (p < 0.05). Notably, all active comparator antiseptic rinses affected wound healing responses by significantly reducing total collagen deposition after intermittent “rinsing” intervals that simulated post-surgical oral rinsing. Nonetheless, intermittent as well as continuous challenge of cells with SLife had a positive effect in functional collagen assays. An herbal extract compound-based oral rinse was found to be cytocompatible to cells critical to oral wound healing and to promote fibroblast migration and differentiation, contrary to existing antiseptic rinses that lack selective cytotoxicity.

Optimizing citric acid protocol to control implant-related infections: An in vitro and in situ study

OBJECTIVE

The present study aimed to establish an optimized protocol for biofilm removal from titanium (Ti) surfaces using citric acid (CA) solutions.

BACKGROUND

Biofilm accumulation is the main factor to trigger peri-implant infections and to increase the risk of treatment failures. Although CA has been suggested as the anti-infective agent with highest potential for biofilm removal on Ti, there is no consensus that CA could improve the anti-infective treatment and its effect.

METHODS

Physical and chemical alterations, electrochemical behavior, cytotoxicity, and antimicrobial effect of CA on Ti discs were evaluated using four concentrations (1, 10, 20, and 40%) and two application methods (immersion and rubbing). Negative control using 0.9% NaCl was used in all experiments. To evaluate whether different application times can have similar response, polymicrobial biofilm (microcosm model) was formed on Ti and treated with CA for 1, 2, 4, and 8 min. An in situ study was conducted to verify whether the established protocol is equally effective in biofilms formed on machined and sandblasted, large-grit, and acid-etched (SLA) Ti surfaces.

RESULTS

CA 40% induced significantly higher surface alterations observed by confocal images and profilometry. In general, rubbing protocol decreased the surface roughness and increased the wettability (p < 0.05), exhibiting better surface cleaning by biofilm removal. CA 10% presented no indirect cytotoxicity and, when applied by rubbing for 8 min, presented proper in vitro antibacterial action and potential corrosion inhibition. When CA 10% was rubbed on Ti surfaces for 4 min, it displayed optimum cleaning ability as 8 min, working equally to remove in situ biofilm on machined and SLA surfaces.

CONCLUSIONS

The application of CA 10% by rubbing for at least 4 min demonstrated to be a promising protocol to eliminate biofilms formed in smooth and rougher surfaces, which could improve implant-related infection therapies.

Residual decontamination chemical agents negatively affect adhesion and proliferation of osteoblast-like cells on implant surface

Purpose

To investigate the influence of implant surface decontaminated and uncontaminated on osteoblast-like cell adhesion and proliferation

Materials and methods

Commercially available implants of different brands and surface characteristics were selected: Biomet 3i® Nanotite (NT) and Osseotite (OT), Straumann® SLActive (SLA), and Neodent® Acqua Drive (ACQ) and Neoporos Drive CM (CM). Physical and chemical properties of the implants were investigated by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and wettability analysis (WETT). Implants were previously contaminated with Aggregatibacter actinomycetemcomitans strains; after that, samples were decontaminated by different chemical methods. Decontaminated (test group; n = 15/type of implant) and uncontaminated (control group; n = 5/type of implant) samples were analyzed according to the number of human osteoblastic osteosarcoma cells (Saos-2) adhered on the implant surface after 24 h and 72 h in SEM images.

Results

ACQ was found to be highly hydrophilic, and NT was the most hydrophobic implant. Increased variation of Saos-2 cell adhesion and proliferation were observed on all test and control groups. Controversially, at the proliferation analysis in 72 h, CM implant was the only implant that showed no significant difference between test and group (p = 0.2833; Tukey’s multiple comparisons test). NT implants showed the greater value of cell proliferation when compared with all types of implant surface (p = 0.0002; Tukey’s multiple comparisons test).

Conclusions

These findings suggest that decontaminated surfaces were able to impair the counting of osteoblast-like cell adhesion and proliferation.

The influence of implant surface roughness on decontamination by antimicrobial photodynamic therapy and chemical agents: A preliminary study in vitro

BACKGROUND

The aim of this preliminary study was to analyze the effectiveness of three different protocols of decontamination on five commercial moderate rough implants.

MATERIAL AND METHODS

The types of implants investigated were: Neoporos Drive CM (CM; Neodent®), Drive CM Acqua (ACQ; Neodent®), SLActive (SLA; Straumann®), Osseotite (OT; Biomet 3i®) and Nanotite (NT; Biomet 3i®). Implant surface properties (n = 2/type of implant; control groups) were analyzed by scanning electron microscopy (SEM) images to determine surface roughness parameters (SRP) and energy disperse X-ray spectrometry to determine the chemical composition. Implants were then inoculated with Aggregatibacter actinomycetencomitans in vitro (n = 6/type of implant;experimental groups) and the contaminated areas were determined in SEM images (500x magnifications). Decontamination of implants was performed in duplicate by three protocols: antimicrobial photodynamic therapy (aPDT), EDTA associated with citric acid (EDTA + CA) and 0.12 % chlorhexidine (CHX). The remaining contaminated area (rCtA) was determined in SEM images (500x magnifications). All quantitative analysis through SEM images were analyzed in ImageJ® software for two-dimensional parameters.

RESULTS

No significant differences were found in SRP among implants (control group), except for Rv (lowest valley) between SLA vs. OT (p=0.0031; Kruskal Wallis post hoc Dunn). NT implants showed highest contaminated area vs. ACQ implants (68.19 % ± 8.63 % and 57.32 % ± 5.38 %, respectively; p = 0.0016, Tukey's test). SRP after decontamination showed statistical difference for Ra (arithmetical mean deviation) for all decontamination groups when compared to control (p < 0.05; ANOVA with post-hoc Tukey's multiple comparisons test), only CM implants showed statistical difference when compared decontamination protocols to control with highest modification of SRP for EDTA + AC group. For decontamination analysis, for applicability of different protocols in the same type of implant, only SLA showed statistical significant difference for aPDT vs. EDTA + CA (p = 0.0114; ANOVA with post-hoc Tukey's multiple comparisons test) with lowest rCTA for aPDT, however for ACQ implants the aPDT showed lowest rCTA with no statistical difference (p > 0.05; ANOVA with post-hoc Tukey's multiple comparisons test). No statistical difference was observed between the decontamination protocols at other implant types.

CONCLUSION

It can be suggested that the chemical-physical characteristics of dental implants can be effected by the process of contamination and decontamination by aPDT and chemical agents.

Fusion peptide engineered "statically-versatile" titanium implant simultaneously enhancing anti-infection, vascularization and osseointegration

Although antimicrobial titanium implants can prevent biomaterial-associated infection (BAI) in orthopedics, they display cytotoxicity and delayed osseointegration. Therefore, versatile implants are desirable for simultaneously inhibiting BAI and promoting osseointegration, especially "statically-versatile" ones with nonessential external stimulations for facilitating applications. Herein, we develop a "statically-versatile" titanium implant by immobilizing an innovative fusion peptide (FP) containing HHC36 antimicrobial sequence and QK angiogenic sequence via sodium borohydride reduction promoted Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC-SB), which shows higher immobilization efficiency than traditional CuAAC with sodium ascorbate reduction (CuAAC-SA). The FP-engineered implant exhibits over 96.8% antimicrobial activity against four types of clinical bacteria (S. aureus, E. coli, P. aeruginosa and methicillin-resistant S. aureus), being stronger than that modified with mixed peptides. This can be mechanistically attributed to the larger bacterial accessible surface area of HHC36 sequence. Notably, the implant can simultaneously enhance cellular proliferation, up-regulate expressions of angiogenesis-related genes/proteins (VEGF and VEGFR-2) of HUVECs and osteogenesis-related genes/proteins (ALP, COL-1, RUNX-2, OPN and OCN) of hBMSCs. In vivo assay with infection and non-infection bone-defect model reveals that the FP-engineered implant can kill 99.63% of S. aureus, and simultaneously promote vascularization and osseointegration. It is believed that this study presents an excellent strategy for developing "statically-versatile" orthopedic implants.

Effectiveness and surface changes of different decontamination protocols at smooth and minimally rough titanium surfaces

BACKGROUND

The objective of this study is to evaluate titanium decontamination after different protocols while assessing changes in surface roughness, chemical composition, and wettability.

METHODS

Ninety-six smooth (S) and 96 minimally rough (R) titanium microimplants were used. Pristine microimplants were reserved for negative control (S-nC/R-nC, n = 9), while the remaining microimplants were incubated in Escherichia coli culture. Non-decontaminated microimplants were used as positive control (S-pC/R-pC, n = 3). The other microimplants were divided into seven different decontamination protocols (12 S/R per group): 24% EDTA, 2% chlorhexidine (CHL), gauze soaked in 2% chlorhexidine (GCHL), gauze soaked in ultrapure water (GMQ), scaling (SC), titanium brush (TiB), and implantoplasty (IP). Contaminated areas were assessed by scanning electron microscope images, chemical composition by energy dispersive X-ray spectroscopy, wettability by meniscus technique, and roughness by an optical profiler.

RESULTS

Higher residual bacteria were observed in R-pC compared with S-pC (P <0.0001). When comparing S and R with their respective pC groups, the best results were obtained with GCHL, SC, TiB, and IP, with no difference between these protocols (P >0.05). Changes in surface roughness were observed after all treatments, with S/R-IP presenting the smoother and a less hydrophilic surface (P <0.05). Apart from IP protocol, all the other groups presented a more hydrophilic surface in R than in S microimplants (P <0.003). All decontamination protocols resulted in a lower percentage of superficial Ti when compared with S/R-nC (P <0.002).

CONCLUSIONS

All decontamination protocols resulted in changes in roughness, wettability, and chemical composition, but GCHL, SC, TiB, an IP presented the best decontamination outcomes.

Effect of implant cleaning on titanium particle dissolution and cytocompatibility

BACKGROUND

Peri-implantitis treatments are mainly based on protocols for teeth but have not shown favorable outcomes for implants. The potential role of titanium dissolution products in peri-implantitis necessitate the consideration of material properties in devising treatment protocols. We assessed implant cleaning interventions on (1) bacterial removal from Ti-bound biofilms, (2) Ti surface alterations and related Ti particle dissolution, and (3) cytocompatibility.

METHODS

Acid-etched Ti discs were inoculated with human peri-implant plaque biofilms and mechanical antimicrobial interventions were applied on the Ti-bound biofilms for 30 seconds each: (1) rotary nylon brush; (2) Ti brush; (3) water-jet on high and (4) low, and compared to sterile, untreated and Chlorhexidine-treated controls. We assessed colony forming units (CFU) counts, biofilm removal, surface changes via scanning electron microscopy (SEM) and atomic force microscopy (AFM), and Ti dissolution via light microscopy and Inductively-coupled Mass Spectrometry (ICP-MS). Biological effects of Ti particles and surfaces changes were assessed using NIH/3T3 fibroblasts and MG-63 osteoblastic cell lines, respectively.

RESULTS

Sequencing revealed that the human biofilm model supported a diverse biofilm including known peri-implant pathogens. WJ and Nylon brush were most effective in reducing CFU counts (P < 0.01 versus control), whereas Chlorhexidine was least effective; biofilm imaging results were confirmatory. Ti brushes led to visible streaks on the treated surfaces, reduced corrosion resistance and increased Ti dissolution over 30 days of material aging as compared to controls, which increase was amplified in the presence of bacteria (all P-val < 0.05). Ti particles exerted cytotoxic effects against fibroblasts, whereas surfaces altered by Ti brushes exhibited reduced osteoconductivity versus controls (P < 0.05).

CONCLUSIONS

Present findings support that mechanical treatment strategies selected for implant biofilm removal may lead to Ti dissolution. Ti dissolution should become an important consideration in the clinical selection of peri-implantitis treatments and a necessary criterion for the regulatory approval of instruments for implant hygiene.

Peri-implantitis Update: Risk Indicators, Diagnosis, and Treatment

Despite the success rates of dental implants, peri-implantitis presents as the most common complication in implant dentistry. This review discusses various factors associated with peri-implantitis and various available treatments, highlighting their advantages and disadvantages. Relevant articles on peri-implantitis published in English were reviewed from August 2010 to April 2020 in MEDLINE/PubMed, Scopus, and ScienceDirect. The identified risk indicators of peri-implant diseases are plaque, smoking, history of periodontitis, surface roughness, residual cement, emergence angle >30 degrees, radiation therapy, keratinized tissue width, and function time of the implant, sex, and diabetes. Peri-implantitis treatments can be divided into nonsurgical (mechanical, antiseptic, and antibiotics), surface decontamination (chemical and laser), and surgical (air powder abrasive, resective, and regenerative). However, mechanical debridement alone may fail to eliminate the causative bacteria, and this treatment should be combined with other treatments (antiseptics and surgical treatment). Surface decontamination using chemical agents may be used as an adjuvant treatment; however, the definitive clinical benefit is yet not proven. Laser treatment may result in a short-term decrease in periodontal pocket depth, while air powder abrasive is effective in cleaning a previously contaminated implant surface. Surgical elimination of a pocket, bone recontouring and plaque control are also effective for treating peri-implantitis. The current evidence indicates that regenerative approaches to treat peri-implant defects are unpredictable.

Does chlorhexidine improve outcomes in non-surgical management of peri-implant mucositis or peri-implantitis?: a systematic review and meta-analysis

BACKGROUND

With greater number of implants being placed in clinical practice, incidence of peri-implant diseases are on the rise. It is not known whether chlorhexidine (CHX) improves outcomes in the management of peri-implant diseases. The aim of this systematic review and meta-analysis was to evaluate the role of CHX in improving outcomes with non-surgical management of peri-implant mucositis and peri-implantitis.

MATERIAL AND METHODS

An electronic search of PubMed, Scopus, Embase, and CENTRAL (Cochrane Central Register of Controlled Trials) databases up to 1st August 2019 was carried out to search for studies evaluating the efficacy of CHX for non-surgical management of peri-implant diseases.

RESULTS

Seven studies were included. Four studies evaluated the role of CHX in peri-implant mucositis and three in peri-implantitis. Oral prophylaxis with mechanical cleansing of implant surface prior to CHX use was carried out in all seven studies. Meta-analysis indicated that use of CHX did not improve probing depths in peri-implant mucositis (SMD= 0.11; 95% CI: -0.16 to 0.38; p=0.42, I2= 0%). Similarly, CHX did not significantly reduce probing depths in patients with peri-implantitis (MD= 1.57; 95% CI: -0.88 to 4.0; p=0.21, I2= 98%). Results on the efficacy of CHX in reducing BOP in peri-implantitis are conflicting.

CONCLUSIONS

Results of our study indicate that adjunctive therapy with CHX may not improve outcomes with non-surgical management of peri-implant mucositis. Conclusions with regards to its role in non-surgical management of peri-implantitis cannot be drawn. There is a need for more homogenous RCTs with large sample size to define the role of CHX in non-surgical management of peri-implant mucositis and peri-implantitis.

Effects of different decontaminating solutions used for the treatment of peri-implantitis on the growth of Porphyromonas gingivalis-an in vitro study

Implants have been considered the treatment of choice to replace missing teeth, unfortunately, peri-implant disease is still an unresolved issue. Contaminated implants may be decontaminated by physical debridement and chemical disinfectants; however, there is a lack of consensus regarding the ideal techniques/agents to be used for the decontamination. The objective of our study was to compare the decontaminating efficacy of different chemical agents on a titanium surface contaminated with Porphyromonas gingivalis, a typical representative of the bacterial flora associated with peri-implantitis. Commercially pure Ti grade 4 discs with a polished surface were treated with a mouthwash containing chlorhexidine digluconate (0.1%), povidone-iodine (PVP-iodine) solution (10%) or citric acid monohydrate (40%). Qualitative and quantitative assessment of cellular growth and survival were assessed by a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay and scanning electron microscopy (SEM). Significant differences in the quantity of P. gingivalis could be observed after 6 days of incubation. A numerical, but not statistically significant (P = 0.066) decrease in the amount of living bacteria was observed in the group treated with the PVP-iodine solution as compared to the control group. The chlorhexidine (CHX)-treated group presented with significantly higher cell counts, as compared to the PVP-iodine-treated group (P = 0.032), while this was not observed compared to the control group and citric acid-treated group. Our results have also been verified by SEM measurements. Our results suggest that for P. gingivalis contamination on a titanium surface in vitro, PVP-iodine is a superior decontaminant, compared to citric acid and chlorhexidine-digulconate solution.

Contamination of titanium dental implants: a narrative review

Contamination of titanium dental implants may lead to implant failure. There are two major types of contaminants: the inorganic and organic contaminants. The inorganic contaminants mostly consist of elements such as calcium, phosphorus, chlorine, sulphur, sodium, silicon, fluorine and some organic carbons. Whereas organic contaminants consist of hydrocarbon, carboxylates, salts of organic acids, nitrogen from ammonium and bacterial cells/byproducts. Contaminants can alter the surface energy, chemical purity, thickness and composition of the oxide layer, however, we lack clinical evidence that contaminations have any effect at all. However, surface cleanliness seems to be essential for implant osseointegration.These contaminants may cause dental implants to fail in its function to restore missing teeth and also cause a financial burden to the patient and the health care services to invest in decontamination methods. Therefore, it is important to discuss the aetiology of dental implant failures. In this narrative review, we discuss two major types of contaminants: the inorganic and organic contaminants including bacterial contaminants. This review also aims to discuss the potential effect of contamination on Ti dental implants.

Salivary Levels of Titanium, Nickel, Vanadium, and Arsenic in Patients Treated with Dental Implants: A Case-Control Study

Background: Recent articles have hypothesized a possible correlation between dental implants dissolution products and peri-implantitis. The null hypothesis tested in this case-control study was that there would be no differences in salivary concentrations of titanium (Ti), vanadium (V), nickel (Ni) and arsenic (As) ions among patients with dental implants, healthy (Group A) or affected by peri-implantitis (Group B), compared to subjects without implants and/or metallic prosthetic restorations (Group C). Methods: Inductively coupled plasma mass spectrometry was used to analyze saliva samples. One-way repeated-measure analysis of variance (ANOVA) was used to identify statistically significant differences in the salivary level of Ti, V, Ni and As between the three groups. Results: A total of 100 patients were enrolled in the study (42 males and 58 females), distributed in three groups: 50 patients in Group C, 26 patients in Group B and 24 patients Group B. In our study, concentrations of metallic ions were higher in Group A and B, compared to the control group, with the exception of vanadium. However, there were no statistically significant differences (p > 0.05) for metallic ions concentrations between Group A and Group B. Conclusions: Based on our results, there are no differences in titanium or other metals concentrations in saliva of patients with healthy or diseased implants.

The Prevention of Implant Surface Alterations in the Treatment of Peri-Implantitis: Comparison of Three Different Mechanical and Physical Treatments

The surgical treatment of peri-implantitis is currently based on the removal of biofilms from the implant surface by primary means of mechanical and physical treatments. However, such approaches often determine some alterations of the implant surface with detrimental effects on re-osseointegration. This study aims to evaluate the effects of four different mechanical and physical treatments on titanium samples with moderately rough surface. Air powder abrasion (AP) with glycine powder, a titanium brush (TB) and a diode laser at 3 W (L3) and 4 W (L4) were tested. Surface morphology, roughness and chemical composition were then assessed by scanning electron microscope (SEM), white light interferometer and X-ray photoelectron spectroscopy (XPS), respectively. The microscopic analysis revealed significant alterations in surface morphology on TB samples, while AP and L3 had only a minor or null impact. L4 samples revealed signs of overheating due to the excessive power. Nevertheless, the overall roughness of the samples was not significantly altered in terms of roughness parameters. Similarly, surface chemical composition was not significantly affected by the treatments. Among the treatments tested in this study, air powder abrasion with glycine powder and 3 W diode laser had the lowest impact on surface physicochemical properties.

Reosseointegration after the surgical treatment of induced peri-implantitis: systematic review on current evidence and translation from the animal to the human model

INTRODUCTION

The aim of this study was to review the histologic evidence of reosseointegration and related influencing factors in experimental induced peri-implantitis.

EVIDENCE ACQUISITION

An electronic search was performed on Medline for animal studies that included a histometric evaluation of the amount of regenerated bone in contact with an implant surface. Questions raised in the study focused on the role of implant surfaces, bone regeneration and decontamination treatments in achieving reosseointegration. A detailed electronic search was then conducted on MEDLINE (PubMed) up to July 2017.

EVIDENCE SYNTHESIS

One hundred and one articles were selected as abstract, thirty-seven articles assessed as full-text and sixteen finally included in the study. Reported measurements of reosseointegration varied significantly in the study, from 0 to 3.37 mm. There is histological evidence that reosseointegration can occur after treatment of ligature-induced peri-implantitis. However regenerated bone in contact with bone is generally restricted to the most apical portion of the peri-implant defect.

CONCLUSIONS

Animal studies of induced peri-implantitis seem to indicate that rough surfaces can enhance reosseointegration as compared to smooth surfaces. With regard to bone regeneration techniques and materials, submerged healing and barrier membranes have shown a positive effect on reosseointegration. No evidence exists, however, about the specific role of different bone substitutes and their ability to improve bone formation. Growth factors have been shown to improve reosseointegration in animal models, though additional study is required to confirm the data. Several decontamination treatments have been shown to promote reosseointegration compared to control; however no specific procedure has proven superior to others in achieving reosseointegration.

Control of Peri-Implant Mucous Inflammation by Using Chlorhexidine or Ultraviolet C Radiation for Cleaning Healing Abutments. Double-Blind Randomized Clinical Trial

Two-phase implants must be exposed to the external environment after the period of osteointegration has elapsed. For this purpose, a healing abutment is placed passing through the mucosa while forming the emergence profile. The continuous connection and disconnection can lead to an alteration in the tissue maturation, both because of the contact of bacterial plaque and because of the mechanical trauma that involves its manipulation, manifesting with different degrees of erythema or bleeding. To assess whether this epithelium disruption can be counteracted, a blinded study design was developed on 150 unitary implant patients divided into three groups (n = 50), applying chlorhexidine (group 1), ultraviolet C (UV-C) at a wavelength of 254 nm (group 2)and no treatment as a control group (group 3), during each of the disconnections and connections during the prosthodontic treatment (1 time per week for four weeks). All groups showed a better epithelium aspect at the end of the evaluation. Although there were no statistically significant differences in the degree of inflammation, the UV-C treated group had the lowest plaque accumulation, and the highest was for the chlorhexidine-treated group.