Ten-year outcome of serum metal ion levels after primary total hip arthroplasty: a concise follow-up of a previous report*

Cobalt ions induce a cellular senescence secretory phenotype in human synovial fibroblast-like cells that may be an early event in the development of adverse local tissue reactions to hip implants

Objectives

Total hip arthroplasty is a successful procedure for treating advanced osteoarthritis (OA). Metal bearing surfaces remain one of the most widely implanted prosthesis, however approximately 10% of patients develop adverse local tissue reactions (ALTRs), namely lymphocytic predominant soft tissue reaction with or without necrosis and osteolysis resulting in high revision rates. The mechanism(s) for these reactions remains unclear although T lymphocyte mediated type IV hypersensitivity to cobalt (Co) and chromium (Cr) ions have been described. The purpose of this study was to determine the prolonged effects of Co and Cr metal ions on synovial fibroblasts to better understand the impact of the synovial membrane in the development of ALTRs.

Methods

Human synovial fibroblast-like cells were isolated from donors undergoing arthroplasty. DNA content and Alamar blue assay were used to determine cellular viability against exposure to Co and Cr. A beta-galactosidase assay was used to determine the development of cellular senescence. Western blotting and RT-qPCR were employed to determine changes in senescent associated secretory factors, signaling and anti-oxidant enzyme expression. A fluorescent assay was used to measure accumulation of hydrogen peroxide.

Results

We demonstrate that prolonged cobalt exposure results in a downregulation of the enzyme catalase resulting in cytosolic accumulation of hydrogen peroxide, decreased Akt activity and cellular senescence. Senescent fibroblasts demonstrated upregulation of proinflammatory cytokines IL-1β and TNFα in addition to the neurotrophic factor NGF.

Conclusion

Our results provide evidence that metal ions induce a senescent associated secretory phenotype in synovial fibroblasts that could contribute to the development of adverse local tissue reactions.

Pre and post-operative serum levels of titanium cobalt and aluminium after implant placement

The preoperative serum levels and postoperative serum levels of titanium, cobalt and aluminium from dental implants in order to assess the release of these ions and to assess any risk of toxicity from these ions after dental implant placement is of interest to dentists. It was observed that there was very slight increase in serum concentration of titanium, cobalt and aluminium after 12 months of placement of implants as compared to before placement of implants. However the increase was non-significant statistically. Our study concluded that the use of dental implants does not pose any risk of toxicity of metal ions like titanium, aluminium and cobalt because of very slight non-significant increase in serum levels of these ions 12 months after implant placement.

Concentrations of Cobalt, Chromium and Titanium and Immunological Changes after Primary Total Knee Arthroplasty-A Cohort Study with an 18-Year Follow-Up

Background: Total knee arthroplasty (TKA) generates elevated metal ion concentrations, but long-term changes in the concentrations of cobalt (Co), chromium (Cr) and titanium (Ti) after primary TKA and potential subsequent immune system activation-not limited to the joint but systemically-are not known. Patients and Methods: We conducted a cohort study on 26 patients with TKA (19 women; 16 with metal-backed and 10 with all-polyethylene tibial components) 18.3 years (min. 16.7, max. 20.5) after index TKA. A total of 69% of patients additionally underwent subsequent arthroplasty of the contralateral knee or either hip after the index surgery. Blood samples were analysed by inductively coupled plasma-mass spectrometry, and leukocytes were characterised by flow cytometry. Patients were clinically assessed using the Knee Society score and by plain radiography of the knee. Results: The median metal ion concentrations were 0.7 (0.1-13.0) µg/L for Co, 0.9 (0.4-5.0) µg/L for Cr, and 1.0 (0.2-13.0) µg/L for Ti. There was no relevant difference in systemic metal ion concentrations between patients exposed to single and multiple arthroplasties. The absolute count and proportion of CD3+CD4+CD8+ T cells was inversely correlated with both Co (rho -0.55, p = 0.003) and Cr concentrations (rho -0.59, p = 0.001). Conclusions: Between the first and second decades after primary TKA, in most patients, the concentrations of Co, Cr and Ti in blood samples were below the thresholds that are considered alarming. The negative correlation of Co and Cr concentrations with a subset of lymphocytes that commonly increases during immune activation is reassuring. This represents a worst-case scenario, underscoring that the investigated metal ions remain within reasonable ranges, even after additional hardware exposure.

Evolution of chromium and cobalt serum levels after the use of a modular neck stem in primary total hip arthroplasty

INTRODUCTION AND OBJECTIVES

Modular neck primary stems were introduced with the theoretical advantage of restoring the hip anatomy more precisely. However, the presence of a second junction has been associated with increased corrosion and release of metal debris. The objective of our study is to quantify of chromium and cobalt serum values, and to analyze their temporal evolution during five years.

MATERIAL AND METHODS

We present a prospective series of 61 patients who underwent primary total hip arthroplasty by implantation of the HMAX-M® stem (Limacorporate, San Daniele, Italy). Serum chromium and cobalt determinations were performed at six months, two years and five years.

RESULTS

Our series shows a progressive elevation in chromium levels with a significant difference between chromium values at six months (0.35±0.18) and five years (0.52±0.36), P=.01. Regarding cobalt, a statistically significant elevation is observed between six months and two years and a subsequent stabilization of values between two and five years, with a cobalt mean at six months (1.17±0.8) significantly lower than at two (2.63±1.76) and five years (2.84±2.1), P=.001.

CONCLUSION

Elevated serum cobalt levels have been observed in patients who underwent modular neck stem implantation. The results obtained in this study have limited the use of stems with a modular neck in our clinical practice.

[Translated article] Evolution of chromium and cobalt serum levels after the use of a modular neck stem in primary total hip arthroplasty

INTRODUCTION AND OBJECTIVES

Modular neck primary stems were introduced with the theoretical advantage of restoring the hip anatomy more precisely. However, the presence of a second junction has been associated with increased corrosion and release of metal debris. The objective of our study is to quantify of chromium and cobalt serum values, and to analyse their temporal evolution during five years.

MATERIAL AND METHODS

We present a prospective series of 61 patients who underwent primary total hip arthroplasty by implantation of the H MAX-M® stem (Limacorporate, San Daniele, Italy). Serum chromium and cobalt determinations were performed at six months, two years and five years.

RESULTS

Our series shows a progressive elevation in chromium levels with a significant difference between chromium values at six months (0.35±0.18) and five years (0.52±0.36), p=.01. Regarding cobalt, a statistically significant elevation is observed between six months and two years and a subsequent stabilisation of values between two and five years, with a cobalt mean at six months (1.17±0.8) significantly lower than at two (2.63±1.76) and five years (2.84±2.1), p=.001.

CONCLUSION

Elevated serum cobalt levels have been observed in patients who underwent modular neck stem implantation. The results obtained in this study have limited the use of stems with a modular neck in our clinical practice.

Cross-Sectional Study of Serum Metal Ions in Patients With Metal Implants in the Maxillofacial Region

Purpose

The purpose of the present study was to measure the serum metal ion levels (titanium, cobalt, chromium) in patients who have metal implants in the maxillofacial region.

Methods

The investigators implemented a cross sectional study on patients treated with procedures requiring metal implants for management of maxillofacial trauma, fixation for orthognathic surgery, and total temporomandibular joint replacement (TJR). Inductively coupled plasma mass spectrometry was used as an analytical method to detect metal ions in serum samples.

Results

The study comprised of 50 patients who were divided into 4 groups- group I- total TJR (n = 18), group II- orthognathic (n = 8), group III- trauma (n = 8), and group IV- control (n = 16). The mean values of metal ions level were raised than the control group.

Conclusion

The present study's results suggest a rise in serum metal ion levels after the metal implantation in maxillofacial region. None of the patients had any abnormal signs and symptoms due to raised metal levels. Further studies are warranted to correlate the serum metal ion levels and their clinical relevance.

A PEEK into carbon fiber: A practical guide for high performance composite polymeric implants for orthopaedic oncology

Introduction

The use of carbon fiber implants in orthopaedic oncology has increased within recent years. The most widely used type of polymer is carbon fiber polyether ether ketone (CF-PEEK). Its radiolucency enables targeted radiotherapy and artifact-free tumor surveillance, which provides major advantages over metallic hardware. We aim to summarize the unique benefits within orthopaedic oncology, clinical pitfalls, and recent advancements.

Methods

Four representative patient cases from a single tertiary academic medical center were treated with carbon fiber implants (n = 2 nails, n = 2 plates) from 2021 to 2022.

Results

There were no adverse events noted during intraoperative implantation or postoperative follow up. All patients reported improvements in pain and no difficulties in ambulation. There were no instances of catastrophic failure or implant loosening.

Conclusion

CF implants offer a diverse array of advantages regarding its radiolucency, low scatter density, and bioinert profile. Nonetheless, further research is required to understand the long-term surgical outcomes and robustness of CF implants. Multi institutional trials could address important aspects of durability and stability over extended periods, feasibility and ease-of-use for different anatomical sites and bone quality, as well as cost-effectiveness in post-operative imaging, healthcare resource utilization, and revision rates. Providing orthopaedic surgeons with valuable insight will enable thorough clinically supported, informed decision making regarding optimal use of implants.

Whole Blood Titanium Concentration after Limb Salvage Surgery with Three-Dimensional-Printed Ti6Al4V Implants

Background

Three-dimensional (3D)-printed customized implants can be fabricated and utilized for all bones with massive bone defects. The main safety issues with 3D-printed implants made of Ti6Al4V alloy are related to the release of metal debris and residual powder. In this study, we investigated the perioperative titanium concentrations in whole blood and peri-implant fluid samples of patients who underwent limb salvage surgery with a 3D-printed Ti6Al4V implant.

Methods

Nineteen patients who underwent limb salvage surgery with 3D-printed Ti6Al4V implants were divided into two groups: the serial samples group and the follow-up group. To observe metal distribution and clearance in the body, serial samples of blood and peri-implant fluid from the surgical drain were prospectively collected for five patients in the serial samples group. For the remaining 14 patients who were followed up for more than a year, blood samples were collected only once.

Results

In the serial samples group, the mean baseline titanium concentration was 0.78 µg/L (range, 0.1-2.2 µg/L): 3 patients showed peak concentration before the third postoperative month, while 2 patients still showed an increasing pattern at this point. Total titanium mass in the surgical drain showed a wash-out phenomenon in a week, with a significant uniform decrease (p = 0.04). In 14 patients in the follow-up group, the mean titanium concentration in the whole blood was 10.8 µg/L (range, 0.3-36.6 µg/L). For the 14 patients with a long-term follow-up, the aluminum and vanadium concentrations were all negligible.

Conclusions

Whole blood titanium concentrations were higher after surgery using 3D-printed implants than after that using conventional orthopedic implants, but markedly lower than in patients with implant failure. None of the patients developed serious clinical adverse effects during follow-up.

How to Manage Metallosis: A Retrospective Cohort Analysis after Revision Hip Surgery

BACKGROUND

Adverse local tissue reactions to metal debris are due to a metal-on-metal bearing complication caused by micromotions at modular interfaces that induce corrosion of the protective oxide layer. This process could lead to wear, fretting, and abrasion with the release of metal ions locally and systemically, which may cause adverse local reactions in nearby tissues. The aim of this study is to describe a series of patients with painful local adverse tissue reactions secondary to corrosion at the modular neck-body interface, to document the clinical presentation, diagnostic workup, and surgical findings of our research, and to search for a possible correlation between metallosis and infection.

METHODS

A retrospective study of patients with adverse local tissue reactions due to metal surface corrosion was performed. Blood samples were collected to identify erythrocyte sedimentation rate, C reactive protein, and procalcitonin, and a magnetic resonance imaging protocol was performed.

RESULTS

Serum cobalt and chromium levels of the 43 patients tested were significantly higher on average. However, both erythrocyte sedimentation rate and C-reactive protein were significantly elevated. Magnetic resonance imaging showed adverse reactions to metal debris with large soft tissue masses and surrounding tissue damage.

CONCLUSIONS

Corrosion in hip prosthesis can lead to the release of metal ions and debris locally and systemically, resulting in local soft tissue changes. A "tumor-like" debridement can reduce this complication.

High risk of elevated metal concentrations with 9/10-mm stem trunnions and highly cross-linked polyethylene grafted with poly(2-methacryloyloxyethyl phosphorylcholine) in total hip arthroplasty

BACKGROUND

The risks of metal release due to fretting and corrosion at the head-neck junction and consequent adverse local tissue reaction (ALTR) have concerns in metal-on-polyethylene (MoP) total hip arthroplasty (THA). Although trunnions have become thinner in diameter to increase the range of motion, it has remained unclear whether this change affects metal release and ALTR in vivo. This study aimed to investigate serum metal concentrations and the prevalence of ALTR in MoP THA with a 9/10-mm stem trunnion.

PATIENTS AND METHODS

A consecutive series of 37 hips that underwent THA using MoP grafted with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) with a 9/10-mm trunnion stem were retrospectively reviewed. Serum metal levels were assessed and compared with those in MoP THA with a 10/12-mm trunnion stem. ALTR was diagnosed with serum metal levels and cross-sectional images. The factors associated with serum metal levels were also assessed.

RESULTS

The median serum cobalt and chromium levels were 1.5 μg/L and 1.0 μg/L in the 9/10-mm group and 0.2 μg/L and 0.4 μg/L in the 10/12-mm group, respectively. ALTR was found in 5 hips of 3 patients. Revision surgery was performed in 4 hips, and all stem trunnions and femoral heads showed severe corrosion. Postoperative walking ability was associated with serum metal levels.

CONCLUSION

It was found that a 9/10-mm stem trunnion with MoP grafted with PMPC had high risks of metal release in primary THA. Careful follow-up and cross-sectional imaging are needed to detect ALTR for early revision.

A mass balance analysis of the tribocorrosion process of titanium alloys using a single micro-asperity: Voltage and solution effects on plastic deformation, oxide repassivation, and ion dissolution

Within modular taper junctions of total hip implants (THA), nominally "smooth" metallic surfaces contain multiple micro-asperities that slide, are plastically deformed, have their oxide film surfaces disrupted and corrode during the fretting corrosion processes. In this work, a mass/volume balance approach is developed and used to assess the contribution of individual components of wear and corrosion to the entirety of the single-asperity tribocorrosion process for the popular THA alloy, Ti-6Al-4V. This analysis measures the total volume change (trough) in the surface due to low cycle single asperity fretting corrosion and compares it to the measured pileup volume which is comprised of plastic deformation, metal particles and oxide particles, plus the fretting current and the concentration of solution-bound species. A simple 17 μm spherical geometry diamond asperity was used and the trough volume, pileup volume, fretting currents and ion concentrations were measured to assess their contribution to the fretting corrosion process. The effects fretting in or out of solution (phosphate buffered saline), and the role of electrode potential, e.g., freely corroding or forced potential (-1.0 V, 0 V, and +1.0 V vs Ag/AgCl) were investigated. Under constant 30 mN loading, 100 cycles duration, 3 Hz cyclic frequency and 80 μm sliding amplitude, the volume abraded, fretting currents, ion release, and pileup volume were all recorded. Damage was analyzed and quantified using digital optical microscopy (DOM), atomic force microscopy (AFM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), and inductive coupled plasma mass spectrometry (ICP-MS). The results were analyzed with ANOVA statistics (α = 0.05). The extent of wear damage (asperity trough volume) is as follows: air = Ecorr, air > -1.0 V = 0 V = +1.0 V. As the amount of pileup volume decreased between conditions, visible oxide generation increased, with V > 0 V having more oxide debris generation and air fretting resulting in the least oxide (and most plastic deformation). Ions in solution were not significant, accounting for less than 1% of the damage. Volume analysis showed trough volumes and pileup volumes were very close to one another and were dominated by plastic deformation. Synergy between wear and corrosion were not observed in this work.

Persistently Raised Serum Titanium Levels After Spinal Instrumentation in Children

STUDY DESIGN

Prospective study of patients undergoing elective spinal deformity surgery with repeated testing for circulating metal ions including preoperative levels acting as controls.

OBJECTIVE

The aim was to determine if levels of particular circulating metal ions are maintained to two years postsurgery including different implant systems and rods.

SUMMARY OF BACKGROUND DATA

Adults having hip replacements, especially metal-on-metal bearings, may develop high metal ion levels. Pediatric spinal implants are known to cause circulating metal ions, notably titanium, chromium, cobalt, and nickel.

MATERIALS AND METHODS

Fifty-six children having spinal deformity surgery were studied with repeated testing for circulating metal ions, using high-resolution inductively coupled plasma mass spectrometry. Linear mixed-effects models adjusting for repeated measurements over time were used to analyze levels of titanium, cobalt, chromium, and nickel.

RESULTS

Titanium levels showed a rapid increase by seven days and a peak at 30 days that was essentially maintained at the two-year assay. At two years, titanium levels were 5.14 times greater compared with the presurgery control level (P<0.0001). Cobalt levels were shown to gradually rise to a peak at 30 days and then slowly decline but remained 1.74 times above mean baseline level at two years (P=0.0004), with a declining trajectory. Chromium and nickel levels rose immediately postoperatively and then steadily declined to baseline by six months and remained at baseline at two years. The five implant systems tested had generally equivalent results.

CONCLUSION

The persistent and rising levels of titanium, in a predominantly female population, is concerning. Titanium is known to cross the placental barrier and enter the circulation of the fetus in rodents and humans, and to accumulate in solid organs especially the liver, spleen, heart, and lymph nodes in humans. This potentially exposes the offspring of mothers with spinal implants to titanium, with potential teratogenic effects.

High Incidence of Mechanically Assisted Crevice Corrosion at 10 Years in Non-Cemented, Non-Recalled, Contemporary Total Hip Arthroplasties

BACKGROUND

One percent to 3% of contemporary non-cemented total hip arthroplasties (THAs) present with symptomatic mechanically assisted crevice corrosion (MACC). The incidence of this problem, however, as well as the rate of asymptomatic elevations in serum cobalt, is unknown.

METHODS

Cobalt and chromium levels were obtained in conjunction with radiographs at routine 10-year surveillance follow-up of THAs from a single manufacturer with a titanium stem, cobalt alloy femoral head, and cross-linked polyethylene countersurface.

RESULTS

Ten-year follow-up of patients with 162 consecutive THAs revealed that 17 patients with 18 hips had died of unrelated causes prior to metal ion testing. Two hips were revised for other reasons, and of the remaining 142 hips, 33 were in patients who were lost, leaving 109 hips (77% of those in alive patients and unrevised for other reasons and 67% of the entire cohort) for investigation. Sixty-three patients (58%) had a serum cobalt less than 1 ppb, and 35 (32%) a cobalt of ≥1 ppb, a cutoff consistent with MACC. Of the 32 hips with definite MACC, 15 of 32 (47%) patients were symptomatic, 16 of 30 (53%) patients had adverse local tissue reaction on magnetic resonance imaging, and 19 of 32 (59%) patients have undergone revision surgery for MACC to date.

CONCLUSION

At 10-year follow-up, a minimum of 22% (35/162) of hips had a cobalt level more than 1 ppb, consistent with MACC. Symptoms and adverse local tissue reactions are each present about one-half of the time, and 59% of those with documented MACC have undergone revision.

Psychiatric Disorders and Genotoxicity Following Primary Metal on Polyethylene Total Hip Arthroplasty and Their Correlation to Cobalt/Chromium Levels

Introduction

Hip arthroplasty (HA) using implantable metal components is among the commonest orthopedic interventions. However, it can be followed by several complications following corrosion and the release of metal ions. Several studies proved that damaged genomic DNA may contribute to the pathophysiology of mental disorders.

Aim

The current work aims to evaluate the psychiatric disorders in metal on polyethylene hip arthroplasty (MOP-HA) patients and its correlation to cobalt/chromium (Co/Cr) levels and genotoxicity.

Methods

The work was a longitudinal follow-up study including 34 adults with unilateral primary MOP-HA meeting the inclusion and exclusion criteria. Preoperatively, 6, 12-months-postoperatively, patients were examined for cognitive impairment using mini-mental-state-examination (MMSE), depression using major-depressive-inventory (MDI), and blood samples were collected for estimation of Co/Cr, detection of genotoxicity by single-cell-gel-electrophoresis (comet assay) and serum 8-hydroxy-2'-deoxyguanosine (8-OHdG).

Results

Cognitive impairment was reported in 18.5% and 14.8% at 6-months, and 12-months postoperative, respectively. Depressive disorder was recorded in 22.2% at 6-months and 14.8% at 12-months postoperative. The marginal homogeneity tests proved a non-significant difference. There was a non-significant difference in preoperative, 6-months, 12-months postoperative MMSE, and MDI scores. There were significantly increased Co/Cr levels at 6-months postoperative. The levels decreased at 12-months postoperative, however, still significantly higher than preoperative values. There was a significant increase in serum 8-OHdG and the levels were positively correlated to cobalt levels at both 6 and 12-months-postoperative. There was a non-significant difference among preoperative, 6-months, and 12-months postoperative comet assay measurements.

Conclusion

From previous findings, we can conclude that will-functioning MOP hip arthroplasty can induce increased ion levels and positively correlated increase in biochemical markers of genotoxicity (8-OHdG).

Are Serum Ion Levels Elevated in Pediatric Patients With Metal Implants?

BACKGROUND

Previous studies report elevated serum titanium (Ti) levels in children with spinal implants. To provide additional data on this topic, we sought to assess serum ion levels at multiple timepoints in pediatric patients with growing spine devices, spinal fusion instrumentation, and extremity implants placed for fracture treatment. We hypothesized that serum Ti, cobalt (Co), and chromium (Cr) levels would be elevated in pediatric patients with growing spine devices compared with patients with extremity implants.

METHODS

Pediatric patients undergoing any primary spine implant placement, those with spine implant revision or removal surgery and patients with other appendicular implant removal had serum Ti, Co, and Cr ion levels drawn at the time of surgery. Fifty-one patients (12 growing spine devices, 13 fusions, and 26 extremity implants) had one set of labs, 31 of whom had labs drawn both preoperatively and postoperatively. Biopsies obtained from tissue specimens at the time of implant revision were analyzed histologically for the presence of metal debris and macrophage activity.

RESULTS

Patients with growing spine implants had elevated serum Ti (3.3 vs. 1.9 ng/mL, P=0.01) and Cr levels (1.2 vs. 0.27 ng/mL, P=0.01) in comparison to patients with fusion rods or extremity implants. With respect to patients with extremity implants, patients with growing spine devices had elevated serum Ti (3.3 vs. 0.98 ng/mL, P=0.013), Co (0.63 vs. 0.26 ng/mL, P=0.017), and Cr levels (1.18 vs. 0.26 ng/mL, P=0.005). On matched pairs analysis, patients who had labs drawn before and after spine implantation had significant increase in serum Ti levels (0.57 vs. 3.3 ng/mL, P=0.02). Histology of tissue biopsies adjacent to growing spine implants showed presence of metal debris and increased macrophage activity compared with patients with extremity implants.

CONCLUSION

Serum Ti, Co, and Cr levels are elevated in children with spinal implants compared with those with extremity implants, particularly in those with growing spine devices. However, the clinical significance of these findings remains to be determined.

LEVEL OF EVIDENCE

Level II-prospective comparative study.

Femoral Stems With Porous Lattice Structures: A Review

Cementless femoral stems are prone to stress shielding of the femoral bone, which is caused by a mismatch in stiffness between the femoral stem and femur. This can cause bone resorption and resultant loosening of the implant. It is possible to reduce the stress shielding by using a femoral stem with porous structures and lower stiffness. A porous structure also provides a secondary function of allowing bone ingrowth, thus improving the long-term stability of the prosthesis. Furthermore, due to the advent of additive manufacturing (AM) technology, it is possible to fabricate femoral stems with internal porous lattices. Several review articles have discussed porous structures, mainly focusing on the geometric design, mechanical properties and influence on bone ingrowth. However, the safety and effectiveness of porous femoral stems depend not only on the characteristic of porous structure but also on the macro design of the femoral stem; for example, the distribution of the porous structure, the stem geometric shape, the material, and the manufacturing process. This review focuses on porous femoral stems, including the porous structure, macro geometric design of the stem, performance evaluation, research methods used for designing and evaluating the femoral stems, materials and manufacturing techniques. In addition, this review will evaluate whether porous femoral stems can reduce stress shielding and increase bone ingrowth, in addition to analyzing their shortcomings and related risks and providing ideas for potential design improvements.

Malseating of modular dual mobility liners

Aims

Prior studies have identified that malseating of a modular dual mobility liner can occur, with previous reported incidences between 5.8% and 16.4%. The aim of this study was to determine the incidence of malseating in dual mobility implants at our institution, assess for risk factors for liner malseating, and investigate whether liner malseating has any impact on clinical outcomes after surgery.

Methods

We retrospectively reviewed the radiographs of 239 primary and revision total hip arthroplasties with a modular dual mobility liner. Two independent reviewers assessed radiographs for each patient twice for evidence of malseating, with a third observer acting as a tiebreaker. Univariate analysis was conducted to determine risk factors for malseating with Youden’s index used to identify cut-off points. Cohen’s kappa test was used to measure interobserver and intraobserver reliability.

Results

In all, 12 liners (5.0%), including eight Stryker (6.8%) and four Zimmer Biomet (3.3%), had radiological evidence of malseating. Interobserver reliability was found to be 0.453 (95% confidence interval (CI) 0.26 to 0.64), suggesting weak inter-rater agreement, with strong agreement being greater than 0.8. We found component size of 50 mm or less to be associated with liner malseating on univariate analysis (p = 0.031). Patients with malseated liners appeared to have no associated clinical consequences, and none required revision surgery at a mean of 14 months (1.4 to 99.2) postoperatively.

Conclusion

The incidence of liner malseating was 5.0%, which is similar to other reports. Component size of 50 mm or smaller was identified as a risk factor for malseating. Surgeons should be aware that malseating can occur and implant design changes or changes in instrumentation should be considered to lower the risk of malseating. Although further follow-up is needed, it remains to be seen if malseating is associated with any clinical consequences.

Cite this article: Bone Jt Open 2021;2(10):858–864.

Impending Trunnion Failure: An Uncommon Radiographic Presentation of Total Hip Arthroplasty Failure

Trunnionosis is emerging as an early mode of failure in conventional metal-on-polyethylene total hip arthroplasty. It is defined as wear or corrosion at the trunnion, the taper at the femoral head-neck interface. Trunnion wear can result in a variety of negative sequelae and, in severe cases, necessitate revision arthroplasty. We describe a 64-year-old man with a metal-on-polyethylene total hip arthroplasty who presented with a sensation of clunking in the hip. Initial imaging and laboratory studies were inconclusive, and the decision was made to monitor. Two years later, trunnion wear was detected on radiographs, presenting as an abnormal alignment of the femoral neck relative to the femoral head. Several case reports and series describe catastrophic total hip arthroplasty failure due to trunnionosis. However, few describe the radiographic signs of wear at the trunnion before gross failure. This early presentation is important to recognize to minimize patient morbidity and aid surgical planning.

Impingement of metal-polyethylene hip prostheses : Potential cause of high systemic titanium levels?

High blood metal levels have been described in the past, primarily in metal-on-metal bearings. Other possible causes are often underestimated. This report presents the case of a 70-year-old female patient who suffered from pronounced neurological symptoms (especially fatigue and concentration problems) 13 years after implantation of a hip endoprosthesis with metal-polyethylene (ME-PE) bearing. An osteolysis in the pelvis and loosening of the acetabular component were detected. In addition, large quantities of metallic black discolored granulomas were detected in the periarticular environment during surgery. A ventral impingement with destruction of the titanium cup and the PE insert was identified as the suspected cause of this condition. The postoperative course of the blood metal levels was unexpected as titanium levels increased massively in the blood. Anamnesis, course of the disease and the surgical procedure as well as especially the course of the metal values in the blood of the patient are presented. Possible causes for the excessive occurrence of metal abrasion, the systemic distribution and potential toxic effects of titanium are explained and discussed in detail. In addition, the currently available literature on the subject is critically examined.

Evaluation of serum metal ion levels in dental implant patients: A prospective study

Introduction:

Titanium is the most commonly used bio-inert implant material. Nevertheless, there is a possibility of systemic release of metal ions, which could have clinical implications like implant failure and toxicity. This prospective study focuses on the evaluation of serum metal ion levels in patients receiving dental implants. The aim of the study is to evaluate the release of titanium, aluminium, and vanadium from dental implants by comparing the preoperative and postoperative serum levels of these ions.

Methodology:

Serum samples were collected from 30 patients undergoing dental implant placement preoperatively and postoperatively at intervals of 6 weeks, 3, 6, and 12 months. These samples were analyzed for titanium, aluminium, and vanadium levels using Inductively Coupled Plasma Optical Emission Spectrometry. The difference in preoperative and postoperative serum levels was measured and statistically analyzed using the paired t-test.

Results:

There was a slight difference in the postoperative levels of titanium and aluminium (2.30 and 4.07 mg/dl) as compared to the preoperative levels (2.28 and 2.30 mg/dl), which was statistically insignificant (P > 0.5). The serum levels of vanadium were too insignificant to be detected by the instrument (<0.0088 mg/dl).

Discussion:

Mild increase in the titanium and aluminium levels in blood serum was noted. These metallic ion levels might increase significantly due to which further clinical research with larger sample sizes and a long-term follow-up period is required to evaluate the clinical effects of metallic ion release from dental implants. There is no significant difference in the serum metal ion levels before and after the implant placement, although a little increase is observed in the aluminium ion levels after the implant placement.

Favourable clinical outcomes following cemented arthroplasty after metal-on-metal total hip replacement: a retrospective study with a mean follow-up of 10 years

BACKGROUND

Given the unexpected high rate of failure following metal-on-metal total hip replacement (MoM-THR), it is expected that more MoM-THR patients will experience revision. The long-term outcomes regarding the primary MoM-THR revised to cemented THR (CTHR) remain controversial. The purpose of this retrospective review was to evaluate the long-term outcomes of patients who underwent conversion from MoM-THR to CTHR.

METHODS

A total of 220 patients (220 hips) who underwent a conversion of primary MoM-THR to CTHR from March 2006 to October 2016 were retrospectively reviewed. The primary outcomes were the functional outcomes assessed using the Harris hip scores (HHS) and major radiographic outcomes. Follow-ups occurred at 3 months, 6 months, 1 year, 2 years, and then every two years after revision.

RESULTS

Mean follow-up was 10.1 years (5-13 years). Distinct improvements were detected in the mean HHS between the preoperative and last follow-up analysis (62.35[±8.49] vs. 84.70[±14.68], respectively, p < 0.001). The key orthopaedic complication rate was 18.2% (27/148). Seven (4.7%) cases experienced a CTHR failure at a mean of 3.4 (±1.2) years after revision MoM-THR, mostly attributed to recurrent dislocation.

CONCLUSION

CTHR might yield an acceptable functional score and a low rate of the key orthopaedic complications.

Systemic Effects of Metals Released from Arthroplasty Implants – a Brief Summary

In recent years, increasing concern has been raised regarding potential systemic toxicity of metals released from arthroplasty implants. A lack of valid metal thresholds for human (organ) toxicity and the prospect of multi-decade survival of modern hip and knee replacements pose special challenges. Indeed, evidence of systemic effects of metals released from such implants is largely missing. Systemic cobalt exposure has repeatedly been associated with cardiotoxic and neurotoxic effects, and also with thyroid dysfunction. The toxic potential of chromium is considered less pronounced. Yet, in arthroplasty there is usually a co-exposure to chromium and cobalt which complicates evaluation of element-specific effects. Toxicity of titanium dioxide nanoparticles has been subject to debate among international regulatory authorities. Their wide use in a variety of products in everyday life, such as toothpaste, cosmetics and food colorants, hampers the assessment of an arthroplasty-induced systemic titanium exposure. To date there is no clear evidence for systemic complications due to titanium dioxide released from arthroplasty implants. Release of further metals such as tantalum, niobium, nickel, vanadium and zirconium from hip and knee replacement implants has been described occasionally, but systemic effects of respective long-term exposure scenarios are unknown. Generally, the characterization of all released metals regarding their chemical and physical specifications is critical for the evaluation of potential systemic risks. Systematic studies investigating the accumulation of metals relevant in arthroplasty in different organs/organ systems and the biological consequences of such accumulations are urgently needed.

A prospective study on cancer risk after total hip replacements for 41,402 patients linked to the Cancer registry of Norway

BACKGROUND

Concerns have been raised that implants used in total hip replacements (THR) could lead to increased cancer risk. Several different materials, metals and fixation techniques are used in joint prostheses and different types of articulation can cause an increased invasion of particles or ions into the human body.

METHODS

Patients with THR registered in the Norwegian Arthroplasty Register during 1987-2009 were linked to the Cancer registry of Norway. Patients with THR due to osteoarthritis, under the age of 75 at time of surgery, were included. Standardized incidence ratios (SIR) were applied to compare cancer risk for THR patients to the general population. Types of THR were divided into cemented (both components), uncemented (both components), and hybrid (cemented femoral and uncemented acetabular components). To account for selection mechanisms, time dependent covariates were applied in Cox-regression, adjusting for cancer risk the first 10 years after surgery. The analyses were adjusted for age, gender and if the patient had additional THR-surgery in the same or the opposite hip. The study follows the STROBE guidelines.

RESULTS

Comparing patients with THR to the general population in Norway we found no differences in cancer risk. The overall SIR for the THR-patients after 10 years follow-up was 1.02 (95% CI: 0.97-1.07). For cemented THR, the SIR after 10 years follow-up was 0.99 (95% CI: 0.94-1.05), for uncemented, 1.16 (95% CI: 1.02-1.30), and for hybrid 1.12 (95% CI: 0.91-1.33). Adjusted Cox analyses showed that patients with uncemented THRs had an elevated risk for cancer (hazard ratio: HR = 1.24, 95% CI: 1.05-1.46, p = 0.009) when compared to patients with cemented THRs after 10 years follow-up. Stratified by gender the increased risk was only present for men. The risk for patients with hybrid THRs was not significantly increased (HR = 1.07, 95% CI: 0.85-1.35, p = 0.55) compared to patients with cemented THRs.

CONCLUSIONS

THR patients had no increased risk for cancer compared to the general population. We found, however, that receiving an uncemented THR was associated with a small increased risk for cancer compared to cemented THR in males, but that this may be prone to unmeasured confounding.

Challenges in the Measurement and Interpretation of Serum Titanium Concentrations

The measurement of circulating metal ion levels in total hip arthroplasty patients continues to be an area of clinical interest. National regulatory agencies have recommended measurement of circulating cobalt and chromium concentrations in metal-on-metal bearing symptomatic total hip arthroplasty patients. However, the clinical utility of serum titanium (Ti) measurements is less understood due to wide variations in reported values and methodology. Fine-scale instrumentation for detecting in situ Ti levels continues to improve and has transitioned from graphite furnace atomic absorption spectroscopy to inductively coupled plasma optical emission spectrometry or inductively coupled plasma mass spectrometry. Additionally, analytical interferences, variable sample types, and non-standardized sample collection methods complicate Ti measurement and underlie the wide variation in reported levels. Normal reference ranges and pathologic ranges for Ti levels remain to be established quantitatively. However, before these ranges can be recognized and implemented, methodological standardization is necessary. This paper aims to provide background and recommendations regarding the complexities of measurement and interpretation of circulating Ti levels in total hip arthroplasty patients.

Titanium Alloy Intramedullary Nails and Plates Affect Serum Metal Ion Levels within the Fracture Healing Period

Titanium alloy implants are the most used materials for the fixation of lower extremity fractures. Although these implants were thought to be inert materials in vitro, several studies have shown increased serum and remote tissue metal ion levels due to wear of implants and friction of the bone-implant interface in vivo. The aim of this study was to investigate the alteration of serum metal ion levels that are released from intramedullary nails and plates used for the fixation of lower extremity fractures, within the fracture healing period. The study included 20 adult patients, who were treated with intramedullary nail or plate osteosynthesis due to closed lower extremity fractures. Alterations of serum titanium, aluminum, molybdenum, and vanadium levels were evaluated at 6, 12, 18, and 24 weeks postoperatively. A statistically significant increase was determined in serum titanium, aluminum, molybdenum, and vanadium ion levels in the intramedullary nail and plate groups at the end of the follow-up period. Pairwise comparisons of metal ion levels between implant groups revealed no significant difference during a 24-week follow-up period. Compared to the control group, statistically significant increased levels of serum titanium, aluminum, vanadium, and molybdenum ions were determined in the implant groups used for the fixation of lower extremity fractures at the end of 24 weeks. In the current literature, the potential toxic effects of prolonged exposure to low levels of these metal ions are still unknown. It can be predicted that long-term metal ion exposure could result in vivo pathological processes in the future.

Revision of a dual-modular stem in patients with adverse tissue reaction

BACKGROUND

Dual-modular femoral components with exchangeable cobalt-chrome neck segments have had higher than expected failure rates due to corrosion and adverse local tissue reaction (ALTR). Complications, survival rates and early clinical outcomes of revision surgery for the treatment of corrosion and ALTR as a result of these implants are underreported.

METHODS

We identified 44 cases of revision THA for corrosion and ALTR resulting from the same dual modular stem. All revision procedures were performed using a modular tapered fluted titanium stem, ceramic heads and highly cross-linked polyethylene.

RESULTS

Complications included: dislocation, infection, reoperation, and chronic pain. Mean Harris Hip Score was 84 following revision surgery.

CONCLUSIONS

Patients undergoing revision surgery for ALTR related to this prosthesis should be aware of the risk of postoperative dislocation and other complications and the potential long-term risk of some chronic pain.

What Surgeons Need to Know About Adverse Local Tissue Reaction in Total Hip Arthroplasty

Adverse local tissue reactions (ALTRs) were first associated with patients with failed metal-on-metal surface replacements and total hip arthroplasty (THA). However, an increasing number of cases of ALTR in metal-on-polyethylene (MOP) THA patients is being reported. Clinically, ALTR appears as benign, aseptic masses or bursae in the periprosthetic tissues. Histopathologically, ALTRs are distinguished by an intense lymphocyte infiltrate, destruction of the synovial surfaces, widespread necrosis, and fibrin exudate. Tribocorrosion of modular junctions appears to be the cause of ALTR in MOP patients. The various tribocorrosion damage modes occurring at modular junctions produce metal ions and a diversity of particulates in relation to size, chemical composition, and structure. The mechanisms by which these various products of tribocorrosion lead to ALTR are still a matter of considerable research. This review clarifies what constitutes ALTR, its relationship to implant factors, and highlights current methods for diagnosis and management of patients with ALTR in the setting of MOP THA.

Standardizing terms for tribocorrosion-associated adverse local tissue reaction in total hip arthroplasty

Recognizing and adopting standardized terms for adverse local tissue reaction associated with tribocorrosion in total hip arthroplasty are essential for clear scientific discourse and clinical communication. Our goal was to develop terms that can be broadly applied to characterize the local tissue response to tribocorrosion debris, based on current evidence regarding the etiology of this failure mode and its consequences. The proposed standardized terms will improve the understanding and interpretation of analytical tests, advance diagnostic and treatment algorithms, and reduce confusion in research by maintaining consistent nomenclature.

Rapid construction of polyetheretherketone (PEEK) biological implants incorporated with brushite (CaHPO4·2H2O) and antibiotics for anti-infection and enhanced osseointegration

Polyetheretherketone (PEEK) is an ideal implant material for orthopedic and dental application due to its high biocompatibility and mechanical property. However, biological inertness of PEEK hinders the effective clinical applications in treating bone defect, especially in the situation accompanied by bacterial infection. In this study, a layer-by-layer (LBL) deposition method with controlled cycles was developed to rapidly construct brushite (CaHPO₄·2H₂O) (CaP) layers containing gentamicin sulfate (GS) on PEEK to obtain CaP-and-GS modified PEEK, named as PEEK/CaP-GS. Different PEEK/CaP-GS, like PEEK/CaP-GS*3, PEEK/CaP-GS*6 and PEEK/CaP-GS*9 were conveniently prepared by repeating the LBL cycles to 3, 6 and 9 times, respectively. The morphology, structure and surface property of the fabricated PEEK/CaP-GS were carefully characterized. In vitro antibacterial experiments illustrated that all of the PEEK/CaP-GS samples had excellent and sustained antibacterial property. Cell proliferation experiments revealed the acceptable biocompatibility and cell osteogenic differentiation of PEEK/CaP-GS, especially in PEEK/CaP-GS*6. X-ray, μ-CT, and histological analysis showed that PEEK/CaP-GS exhibited in vivo antibacterial activity and osseointegration ability in the treatment of bone defect with infection. In both the in vitro and the in vivo experiments, PEEK/CaP-GS*6 prepared from the 6 LBL cycles exhibited the best antibacterial and osseointegration ability for bone healing. This work opens new avenue of the facile and effective modification of PEEK with special biological functions for clinical application, especially for the implants requiring excellent antibacterial and osseointegration ability.

Blood and plasma titanium levels associated with well-functioning hip implants

BACKGROUND

Hip implants are usually manufactured from cobalt-chromium and titanium alloys. As the implants wear and corrode, metal debris is released into the surrounding tissue and blood, providing a potential biomarker for their function. Whilst there are laboratory reference levels for blood cobalt and chromium in patients with well and poorly functioning hip implants, there are no such guidelines for titanium. This is despite the increasing use of titanium implants worldwide.

PATIENTS AND METHODS

We recruited a consecutive series of 95 patients (mean age 71 years, mean time after surgery 8.5 years) with one hip implant type, inserted by the same surgeon. We assessed clinical and radiological outcome, and measured blood and plasma titanium using high resolution inductively-coupled plasma mass spectrometry.

RESULTS

The upper normal reference limit for blood and plasma titanium was 2.20 and 2.56 μg L^-1, respectively, and did not differ significantly between males and females.

CONCLUSION

We are the first to propose a laboratory reference level for blood and plasma titanium in patients with well-functioning titanium hip implants. This is an essential starting point for further studies to explore the clinical usefulness of blood titanium as a biomarker of orthopaedic implant performance, and comes at a time of considerable controversy regarding the use of certain titanium alloys in hip arthroplasty.

Evaluation of Aerosol Electrospray Analysis of Metal-on-Metal Wear Particles from Simulated Total Joint Replacement

Wear is a common cause for aseptic loosening in artificial joints. The purpose of this study was to develop an automated diagnostical method for identification of the number and size distribution of wear debris. For this purpose, metal debris samples were extracted from a hip simulator and then analyzed by the electrospray method combined with a differential mobility analyzer, allowing particle detection ranging from several nanometers up to 1 µm. Wear particles were identified with a characteristic peak at 15 nm. The electrospray setup was successfully used and validated for the first time to characterize wear debris from simulated total joint replacement. The advantages of this diagnostic method are its time- and financial efficiency and its suitability for testing of different materials.

Fourier transform infrared spectroscopic imaging of wear and corrosion products within joint capsule tissue from total hip replacements patients

Implant debris generated by wear and corrosion is a prominent cause of joint replacement failure. This study utilized Fourier transform infrared spectroscopic imaging (FTIR-I) to gain a better understanding of the chemical structure of implant debris and its impact on the surrounding biological environment. Therefore, retrieved joint capsule tissue from five total hip replacement patients was analyzed. All five cases presented different implant designs and histopathological patterns. All tissue samples were formalin-fixed and paraffin-embedded. Unstained, 5 μm thick sections were prepared. The unstained sections were placed on BaF₂ windows and deparaffinized with xylene prior to analysis. FTIR-I data were collected at a spectral resolution of 4 cm^-1 using an Agilent Cary 670 spectrometer coupled with Cary 620 FTIR microscope. The results of study demonstrated that FTIR-I is a powerful tool that can be used complimentary to the existing histopathological evaluation of tissue. FTIR-I was able to distinguish areas with different cell types (macrophages, lymphocytes). Small, but distinct differences could be detected depending on the state of cells (viable, necrotic) and depending on what type of debris was present (polyethylene [PE], suture material, and metal oxides). Although, metal oxides were mainly below the measurable range of FTIR-I, the infrared spectra of tissues exhibited noticeable difference in their presence. Tens of micrometer sized polyethylene particles could be easily imaged, but also accumulations of submicron particles could be detected within macrophages. FTIR-I was also able to distinguish between PE debris, and other birefringent materials such as suture. Chromium-phosphate particles originating from corrosion processes within modular taper junctions of hip implants could be identified and easily distinguished from other phosphorous materials such as bone. In conclusion, this study successfully demonstrated that FTIR-I is a useful tool that can image and determine the biochemical information of retrieved tissue samples over tens of square millimeters in a completely label free, nondestructive, and objective manner. The resulting chemical images provide a deeper understanding of the chemical nature of implant debris and their impact on chemical changes of the tissue within which they are embedded.

Blood titanium level as a biomarker of orthopaedic implant wear

BACKGROUND

Joint replacement implants are usually manufactured from cobalt-chromium or titanium alloys. After the device is implanted, wear and corrosion generate metal particles and ions, which are released into local tissue and blood. The metal debris can cause a range of adverse local and systemic effects in patients.

RESEARCH PROBLEM

In the case of cobalt and chromium, a blood level exceeding 7 μg L^-1 indicates potential for local toxicity, and a failing implant. It has been repeatedly suggested in the literature that measurement of titanium could also be used to assess implant function. Despite an increasing interest in this biomarker, and growing use of titanium in orthopaedics, it is unclear what blood concentrations should raise concerns. This is partly due to the technical challenges involved in the measurement of titanium in biological samples.

AIM

This Review summarises blood/serum titanium levels associated with well-functioning and malfunctioning prostheses, so that the prospects of using titanium measurements to gain insights into implant performance can be evaluated.

CONCLUSION

Due to inter-laboratory analytical differences, reliable conclusions regarding "normal" and "abnormal" titanium levels in patients with orthopaedic implants are difficult to draw. Diagnosis of symptomatic patients should be based on radiographic evidence combined with blood/serum metal levels.

Is a modular dual mobility acetabulum a viable option for the young, active total hip arthroplasty patient?

AIMS

Modular dual mobility (DM) prostheses in which a cobalt-chromium liner is inserted into a titanium acetabular shell ( vs a monoblock acetabular component) have the advantage of allowing supplementary screw fixation, but the potential for corrosion between the liner and acetabulum has raised concerns. While DM prostheses have shown improved stability in patients deemed 'high-risk' for dislocation undergoing total hip arthroplasty (THA), their performance in young, active patients has not been reported. This study's purpose was to assess clinical outcomes, metal ion levels, and periprosthetic femoral bone mineral density (BMD) in young, active patients receiving a modular DM acetabulum and recently introduced titanium, proximally coated, tapered femoral stem design.

PATIENTS AND METHODS

This was a prospective study of patients between 18 and 65 years of age, with a body mass index (BMI) < 35 kg/m² and University of California at Los Angeles (UCLA) activity score > 6, who received a modular cobalt-chromium acetabular liner, highly crosslinked polyethylene mobile bearing, and cementless titanium femoral stem for their primary THA. Patients with a history of renal disease and metal hardware elsewhere in the body were excluded. A total of 43 patients (30 male, 13 female; mean age 52.6 years (sd 6.5)) were enrolled. All patients had a minimum of two years' clinical follow-up. Patient-reported outcome measures, whole blood metal ion levels (ug/l), and periprosthetic femoral BMD were measured at baseline, as well as at one and two years postoperatively. Power analysis indicated 40 patients necessary to demonstrate a five-fold increase in cobalt levels from baseline (alpha = 0.05, beta = 0.80). A mixed model with repeated measures was used for statistical analysis.

RESULTS

Mean Harris Hip Scores improved from 54.1 (sd 20.5) to 91.2 (sd 10.8) at two years postoperatively (p < 0.001). All patients had radiologically well-fixed components, no patients experienced any instability, and no patients required any further intervention. Mean cobalt levels increased from 0.065 ug/l (sd 0.03) preoperatively to 0.30 ug/l (sd 0.51) at one year postoperatively (p = 0.01) but decreased at two years postoperatively to 0.16 ug/l (sd 0.23; p = 0.2). Four patients (9.3%) had a cobalt level outside the reference range (0.03 ug/l to 0.29 ug/l) at two years postoperatively, with values from 0.32 ug/l to 0.94 ug/l. The mean femoral BMD ratio was maintained in Gruen zones 2 to 7 at both one and two years postoperatively using this stem design. At two years postoperatively, mean BMD in the medial calcar was 101.5% of the baseline value.

CONCLUSION

Use of a modular DM prosthesis and cementless, tapered femoral stem has shown encouraging results in young, active patients undergoing primary THA. Elevation in mean cobalt levels and the presence of four patients outside the reference range at two years postoperatively demonstrates the necessity of continued surveillance in this cohort. Cite this article: Bone Joint J 2019;101-B:365-371.

Hip simulator testing of the taper-trunnion junction and bearing surfaces of contemporary metal-on-cross-linked-polyethylene hip prostheses

Adverse reaction to metal debris released from the taper-trunnion junction of modular metal-on-polyethylene (MoP) total hip replacements (THRs) is an issue of contemporary concern. Therefore, a hip simulator was used to investigate material loss, if any, at both the articulating and taper-trunnion surfaces of five 32-mm metal-on-cross-linked-polyethylene THRs for 5 million cycles (Mc) with a sixth joint serving as a dynamically loaded soak control. Commercially available cobalt-chromium-molybdenum femoral heads articulating against cross-linked polyethylene (XLPE) acetabular liners were mounted on 12/14 titanium (Ti6Al4V) trunnions. Weight loss (mg) was measured gravimetrically and converted into volume loss (mm³ ) for heads, liners, and trunnions at regular intervals. Additionally, posttest volumetric wear measurements of the femoral tapers were obtained using a coordinate measuring machine (CMM). The surface roughness (Sa) of femoral tapers was measured posttest. After 5 Mc, the mean volumetric wear rate for XLPE liners was 2.74 ± 0.74 mm³ /Mc. The CMM measurements confirmed material loss from the femoral taper with the mean volumetric wear rate of 0.045 ± 0.024 mm³ /Mc. The Sa on the worn area of the femoral taper showed a significant increase (p < 0.001) compared with the unworn area. No other long-term hip simulator tests have investigated wear from the taper-trunnion junction of contemporary MoP THRs. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:156-166, 2020.

In vitro and in vivo evaluations of the fully porous Ti6Al4V acetabular cups fabricated by a sintering technique

A type of canine fully porous Ti6Al4V acetabular cup was fabricated by a well-controlled powder sintering technique. The traditional hydroxyapatite-coated (HA-coated) cups were also prepared as the control. The characteristics, mechanical and biological properties of the two types of cups were evaluated by scanning electron microscopy, mechanical tests, finite element analysis and canine total hip arthroplasty (THA). Results showed that the porous cup had high porosity and large pore size with good mechanical properties without obvious stress shielding, and it had sufficient safety for implantation according to the finite element analysis. Both groups showed good biocompatibility and osteogenic ability after the THA surgeries, but the porous group had more bone ingrowth and higher bone-implant contact rate according to the micro-CT and histopathologic results. Therefore, the canine fully porous Ti6Al4V acetabular cup fabricated by the sintering technique could provide sufficient space and adequate mechanical support without obvious stress shielding effect for bone ingrowth. Compared with the traditional HA-coated cup, the porous cup may be more effective in achieving in vivo stability, which could contribute to reducing the risk of aseptic loosening.

Serum Nickel and Titanium Levels after Transcatheter Closure of Atrial Septal Defects with Amplatzer Septal Occluder

Introduction

There is a concern about release of nickel and titanium after implantation of nitinol-containing devices.

Objective

To evaluate serum nickel and titanium release after implantation of Amplatzer occluder.

Materials and methods

In 38 pediatric patients with no history of nickel sensitivity, blood samples were drawn 24 hours before and 24 hours, 1, 3, 6, and 12 months after implantation. Nickel and titanium concentrations were measured by atomic absorption spectrophotometry.

Results

The median serum nickel level which was 0.44 ng/mL before the implantation increased to 1.01 ng/mL 24 hours after implantation and 1.72 ng/mL one month after implantation. The maximum level was detected 3 months after implantation, with a median level of 1.96 ng/mL. During follow-up, the nickel levels decreased to those measured before implantation. Serum nickel levels at the 24th hour, 1st month, and 3rd month following implantation were found to have increased significantly. No patients showed a detectable serum titanium level.

Discussion

This is the first study that evaluated both serum nickel and titanium release after implantation of the Amplatzer occluder. Our study shows that nickel is released from the device in the first few months after implantation. Therefore, in patients with nickel allergy, other devices may be considered.

Comparative Mid-term Follow-up Study of Primary Total Hip Arthroplasty with Metal-on-metal and Metal-on-polyethylene Bearings

OBJECTIVE

To compare mid-term clinical results of total hip arthroplasty (THA) with metal-on-metal (MoM) and metal-on-polyethylene (MoP) bearings and to evaluate the biological safety of the two kinds of prostheses.

METHODS

Thirty-two patients who received a primary THA with an MoM articulation between January 2008 and December 2010 were selected to form the MoM group retrospectively. The MoP group consisted of 32 patients who received a THA with an MoP prosthesis during the same period. Clinical assessments, imaging examinations, laboratory tests, and metal ion concentration detections were conducted on each patient. Another 32 healthy volunteers were recruited as the control group.

RESULTS

Twenty-seven patients in the MoM group and 28 patients in the MoP group completed the follow-up, with a mean follow-up time of 74.6 and 75.9 months, respectively. The mean Harris score at the latest follow-up was 91.5 ± 5.1 in the MoM group versus 88.9 ± 4.0 in the MoP group (P = 0.22). The MoM group showed a better range of motion in flexion, abduction, and external rotation. Co and Cr levels in the MoM group were 2.5-fold and 2.0-fold of these in the MoP group. A mild change of liver function was observed in both groups, while the values of renal function and humoral immunity stayed static. Elevated proportions of Th1 and Th17 cells and decreased proportion of Th2 cells were observed in the MoM group. The occurrence rate of pseudotumors in the MoM and MoP groups was 40.74% ± 9.45% and 14.28% ± 6.61%, respectively (P < 0.05).

CONCLUSION

At the mid-term follow-up, clinical results were satisfied in both groups. MoM prosthesis could result in elevated serum metal ion levels and there is a higher risk of pseudotumor. Long follow-up is needed to evaluate the safety of MoM prostheses.

Chromium and Nickel Concentrations in Subjects with a Stainless Steel Metal-on-Metal Cervical Disc Arthroplasty: Results from a Prospective Longitudinal Study with 7 Years Follow-Up

Background

Cervical disc arthroplasty (CDA) has emerged as an alternative to anterior cervical discectomy and fusion for degenerative cervical disc disease. The artificial discs provide intervertebral motion using multicomponent articulation and thus tend to generate particulate debris and soluble metal ions. Limited information is available on the long-term metal concentrations and associated systemic adverse events observed in metal-on-metal CDA. Serum chromium (Cr) and nickel (Ni) concentrations were assessed in patients implanted with ball-in-trough stainless steel-based cervical disc through 7 years.

Methods

A prospective, nonrandomized longitudinal study was conducted that included 25 patients following rigorous exclusion criteria that included no previous permanent metal implants and no professional exposure to metal particles. Blood serum Cr and Ni concentrations were assayed preoperatively and at 3, 6, 12, 24, 36, 60, and 84 months postoperatively using high-resolution inductively coupled plasma-mass spectrometry. Longitudinal statistical comparisons were made using the Friedman test with statistical significance at P < .05.

Results

Median serum concentrations determined preoperatively and at 3, 6, 12, 24, 36, 60, and 84 months postoperatively were 0.074, 0.106, 0.132, 0.170, 0.172, 0.274, 0.192, and 0.203 ng/mL for Cr and 0.085, 0.178, 0.222, 0.175, 0.205, 0.284, 0.181, and 0.194 ng/mL for Ni. The serum Cr concentrations were statistically higher for all postoperative time periods compared to preoperative concentration (Friedman P <.01), whereas serum Ni concentration was statistically higher at the 84-month postoperative time period than the preoperative concentration (Friedman P <.01) and then the concentration at 3, 12, 24, and 60 months postoperatively (Friedman P < .03).

Conclusions

The Cr concentrations detected at all postoperative times were statistically higher than preoperative concentrations, whereas Ni concentration was statistically higher than the preoperative concentration only at 84 months.

Discovery of biomarkers to identify peri-implant osteolysis before radiographic diagnosis

Peri-implant osteolysis is commonly diagnosed after substantial bone loss has occurred, making revision surgery more challenging. The goal of the current study was to identify urinary biomarkers that differentiate total hip replacement patients who eventually develop osteolysis from patients who do not. We used a repository of 24-h urine samples collected prior to surgery and annually thereafter in 26 patients, 16 who developed osteolysis, and 10 who did not. We examined the markers at radiographic diagnosis, annually for 6 years preceding diagnosis, at the first post-operative sampling point, and pre-operatively. Patients in the osteolysis and non-osteolysis groups were matched according to time post-surgery and did not differ in the male:female ratio or age at surgery. Seven candidate biomarkers were measured, including free deoxypyridinoline (DPD), cross-linked N-telopeptides (NTX), interleukin-6 (IL-6), interleukin-8 (IL-8), osteoprotegerin (OPG), α-crosslaps (α-CTX), and β-crosslaps (β-CTX). As an individual biomarker, DPD demonstrated the highest ability to predict osteolysis, with an area under the curve (AUC) in Receiver Operating Characteristic (ROC) analyses of 0.844 at 6 years prior to diagnosis. A panel of α-CTX and IL-6 was able to identify at-risk patients with an AUC of 0.941 or greater at all post-operative time points and an AUC of 1.000 pre-operatively. The results demonstrate the potential of using non-invasive biomarkers to identify patients at risk for peri-implant osteolysis long before the emergence of radiographic signs. Further, the high accuracy of the pre-operative biomarker levels demonstrates the potential importance of pre-existing, patient-specific factors driving subsequent osteolysis. Study Design © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2754-2761, 2018.

Diagnosing Taper Corrosion: When Is It the Taper and When Is It Something Else?

There has been an increasing use of modularity at the head-neck junction in total hip arthroplasty to more closely mimic the native anatomy, allowing for optimal leg length and stability. Corrosion at this junction in metal-on-polyethylene bearings can lead to an adverse local tissue reaction (ALTR). This increasingly prevalent condition should be considered in the differential diagnosis of hip pain and difficulty ambulating. A recent symposium by the American Academy of Hip and Knee Surgeons described the diagnosis, etiology, management, and prevention of taper corrosion. This article describes the history, physical, plain and advanced imaging findings, laboratory tests, and other diagnoses that should be taken into consideration when diagnosing taper corrosion. The presence of ALTR due to taper corrosion can mimic other diagnoses such as periprosthetic joint infection, instability, or aseptic loosening. Serum metal levels have been found to be the most effective screening tool for identifying corrosion, but other common causes of hip pain and difficulty ambulating should always be ruled out with the use of radiographs and common laboratory techniques before diagnosing ALTR due to corrosion.

Adverse Local Tissue Reaction After a Metal-on-Metal Total Hip Prosthesis Without Elevated Serum Metal Ion Levels

In the 1990s, metal-on-metal (MoM) bearings were reintroduced in total hip arthroplasty (THA), having the proposed advantages of decreased wear and improved stability. However, catastrophic adverse local tissue reaction (ALTR) secondary to metal debris from both the bearing surface and the head-neck junction is a well-recognized complication. The measurement of metal ion levels in the serum is often a first-line test to identify failure of a MoM bearing. The authors describe a 70-year-old man who presented with a multiply revised MoM THA and a large periprosthetic fluid collection incidentally seen during computed tomography for renal nephrolithiasis. The patient reported painless, progressive swelling over the lateral aspect of the hip. An infectious workup including serum erythrocyte sedimentation rate, C-reactive protein, and intraarticular hip aspiration yielded negative results. Metal ion levels in the serum, including a minimally elevated cobalt level, were unremarkable, and metal-lymphocyte transformation testing yielded negative results. Radiographic imaging revealed progressive osteolysis around the proximal femur, and magnetic resonance imaging showed large fluid collections with irregular wall thickening surrounding the gluteal and iliopsoas musculature. At revision surgery, a large fluid collection and corrosion at the head-neck junction were present. Pathology specimens confirmed the presence of an ALTR. This report presents a previously undescribed case of an ALTR secondary to MoM THA in the absence of elevated serum metal ion levels. This indicates the necessity of considering all aspects of a patient's clinical presentation, imaging modalities, and laboratory testing in the evaluation and diagnosis of a symptomatic MoM THA. [Orthopedics. 2018; 41(3):e438-e441.].

The role of citrate, lactate and transferrin in determining titanium release from surgical devices into human serum

The presence of ionic titanium in the serum of patients with titanium implants is currently unexplained. This is presumed due to corrosion, and yet the serum titanium concentration measured in patients is far greater than that predicted by its solubility. The binding of titanium ion as Ti(IV) to human transferrin (hTF) in serum indicates that Ti(IV) ions interact with human physiology. This is an intriguing finding since there is currently no known role for titanium ions in human physiology. Thus, understanding the factors that determine in vivo titanium ion release is relevant to further understanding this metal's interactions with human biochemistry. The present study sought to determine the extent of titanium ion release of into human serum in vitro, and the role of citrate, lactate and hTF in this process. It was found that, when surgical devices of commercially pure titanium were placed into human serum, citrate and lactate concentrations were the prime determinants of titanium release. Crystallography revealed Ti(IV) bound to hTF in the presence of citrate alone, signalling that citrate can act as an independent ligand for Ti(IV) binding to hTF. Based on these findings, a two-stage process of titanium ion release into human serum that is dependent upon both citrate and hTF is proposed to explain the ongoing presence of titanium ion in human subjects with implanted titanium devices.

Evidence based recommendations for reducing head-neck taper connection fretting corrosion in hip replacement prostheses

INTRODUCTION

This systematic review seeks to summarise the published studies investigating prosthetic design, manufacture and surgical technique's effect on fretting corrosion at the head-neck taper connection, and provide clinical recommendations to reduce its occurrence.

METHODS

PubMed, MEDLINE and EMBASE electronic databases were searched using the terms taper, trunnion, cone and head-neck junction. Articles investigating prosthetic design, manufacture and surgical technique's effect on fretting corrosion were retrieved, reviewed and graded according to OCEBM levels of evidence and grades of recommendation.

RESULTS

The initial search yielded 1,224 unique articles, and 91 were included in the analysis.

CONCLUSIONS

There is fair evidence to recommend against the use of high offset femoral heads, larger diameter femoral heads, and to pay particular consideration to fretting corrosion's progression with time and risk with heavier or more active patients. Particular to metal-on-metal hip prostheses, there is fair evidence to recommend positioning the acetabular component to minimise edge loading. Particular to metal-on-polyethylene hip prostheses, there is fair evidence to recommend the use of ceramic femoral heads, against use of cast cobalt alloy femoral heads, and against use of low flexural rigidity femoral stems. Evidence related to taper connection design is largely conflicting or inconclusive. Head-neck taper connection fretting corrosion is a multifactorial problem. Strict adherence to the guidelines presented herein does not eliminate the risk. Prosthesis selection is critical, and well-controlled studies to identify each design parameter's relative contribution to head-neck taper connection fretting corrosion are required.

Release of titanium after insertion of dental implants with different surface characteristics - an ex vivo animal study

In the present study, amount of titanium (Ti) released into the surrounding bone during placement of implants with different surface structure was investigated. Quantification of Ti released during insertion from three different implants was performed in this ex vivo study. Jaw bone from pigs was used as model for installation of the implants and Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) was used for analysis of the released Ti. Implant surface were examined with scanning electron microscopy (SEM), before and after the placement into the bone. Ti was abraded to the surrounding bone upon insertion of a dental implant and the surface roughness of the implant increased the amount of Ti found. Diameter and total area of the implant were of less importance for the Ti released to the bone. No visible damages to the implant surfaces could be identified in SEM after placement.