Core Set of Radiographic Parameters for Shoulder Arthroplasty Monitoring: Criteria Defined by an International Delphi Consensus Process

Mid- to long-term outcome of reverse total shoulder arthroplasty as revision procedure for failed hemiarthroplasty after proximal humerus fracture

BACKGROUND

Insufficient tuberosity healing is the most common reason for poor outcome after treatment of proximal humerus fractures (PHFs) using hemiarthroplasty (HA). In these cases, revision to reverse total shoulder arthroplasty (RTSA) can improve function and reduce pain in the short term, however, long-term results remain scarce. Aim of this study was to evaluate the clinical and radiological mid- to long-term results in patients with a revision RTSA after failed HA for PHF.

METHODS

In this retrospective study all patients that received a revision to RTSA after failed fracture HA between 2006 and 2018 were included. A total of 49 shoulders in 48 patients (38 female, 10 male; mean age 82 ± 9 years) were identified in our database. A total of 20 patients (17 female, 3 male; mean age was 79 ± 9 years) were available for follow-up examination after a mean time period of approximately eight years (3-14 years) after revision surgery. At final follow-up, patients were assessed using a subjective shoulder value (SSV), range of motion (ROM), visual analogue score (VAS), the Constant Score (CS) and the 12-Item Short Form Survey (SF-12).

RESULTS

At final follow-up, mean CS was 55 ± 19 (19-91), VAS averaged 3 ± 3 (0-8) and mean SSV was 61 ± 18% (18-90%). Mean SF-12 was 44 (28-57) with a mean physical component summary (PCS) of 38 (21-56) and a mean mental component summary (MCS) of 51 (29-67). On average active forward flexion (FF) was 104° (10-170°), active abduction (ABD) was 101° (50-170°), active external rotation (ER) was 19° (10-30°) and active internal rotation (IR) of the lumbosacral transition was reached. Three patients presented with a periprosthetic humeral fracture after RTSA implantation and underwent a reoperation (15%) during follow-up period.

CONCLUSIONS

Revision RTSA results in promising clinical results in patients after initial failed HA after PHF. A complication and reoperation rate of 15% is tolerable in consideration of satisfactory functional and psychological outcome.

TRIAL REGISTRATION

Retrospectively registered.

Reverse total shoulder arthroplasty with proximal bone loss: a biomechanical comparison of partially vs. fully cemented humeral stems

BACKGROUND

The appropriate amount of cementation at the time of reverse total shoulder arthroplasty with significant proximal bone loss or resection is unknown. Extensive cementation of a humeral prosthesis makes eventual revision arthroplasty more challenging, increasing the risk of periprosthetic fracture. We analyzed the degree of subsidence and torque tolerance of humeral components undergoing standard cementation technique vs. our reduced polymethyl methacrylate (PMMA) protocol. Reduced cementation may provide sufficient biomechanical stability to resist physiologically relevant loads, while still permitting a clinically attainable torque for debonding the prosthesis.

METHODS

A total of 12 cadaveric humeri (6 matched pairs) underwent resection of 5 cm of bone distal to the greater tuberosity. Each pair of humeri underwent standard humeral arthroplasty preparation followed by either cementation using a 1.5-cm PMMA sphere at a location 3 cm inferior to the porous coating or standard full stem cementation. A 6-degree-of-freedom robot was used to perform all testing. Each humeral sample underwent 200 cycles of abduction, adduction, and forward elevation while being subjected to a physiologic compression force. Next, the samples were fixed in place and subjected to an increasing torque until implant-cement separation or failure occurred. Paired t tests were used to compare mean implant subsidence vs. a predetermined 5-mm threshold, as well as removal torque in matched samples.

RESULTS

Fully and partially cemented implants subsided 0.49 mm (95% CI 0.23-0.76 mm) and 1.85 mm (95% CI 0.41-3.29 mm), respectively, which were significantly less than the predetermined 5-mm threshold (P < .001 and P < .01, respectively). Removal torque between fully cemented stems was 45.22 Nm (95% CI 21.86-68.57 Nm), vs. 9.26 Nm (95% CI 2.59-15.93 Nm) for partially cemented samples (P = .021). Every fully cemented humerus fractured during implant removal vs. only 1 in the reduced-cementation group. The mean donor age in our study was 76 years (range, 65-80 years). Only 1 matched pair of humeri belonged to a female donor with comorbid osteoporosis. The fractured humerus in the partially cemented group belonged to that donor.

CONCLUSION

Partially and fully cemented humeral prostheses had subsidence that was significantly less than 5 mm. Partially cemented stems required less removal torque for debonding of the component from the cement mantle. In all cases, removal of fully cemented stems resulted in humeral fracture. Reduced cementation of humeral prostheses may provide both sufficient biomechanical stability and ease of future component removal.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort

BACKGROUND

This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups.

MATERIALS AND METHODS

All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups.

RESULTS

In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485).

CONCLUSIONS

Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

LEVEL OF EVIDENCE III

Analysis of three different reverse shoulder arthroplasty designs for cuff tear arthropathy - the combination of lateralization and distalization provides best mobility

BACKGROUND

The two major reverse shoulder arthroplasty (RSA) designs are the Grammont design and the lateralized design. Even if the lateralized design is biomechanically favored, the classic Grammont prosthesis continues to be used. Functional and subjective patient scores as well as implant survival described in the literature so far are comparable to the lateralized design. A pure comparison of how the RSA design influences outcome in patients has not yet been determined. The aim of this study was a comparison focused on patients with cuff tear arthropathy (CTA).

METHODS

We analyzed registry data from 696 CTA patients prospectively collected between 2012 and 2020 in two specialized orthopedic centers up to 2 years post-RSA with the same follow-up time points (6,12 24 months). Complete teres minor tears were excluded. Three groups were defined: group 1 (inlay, 155° humeral inclination, 36 + 2 mm eccentric glenosphere (n = 50)), group 2 (inlay, 135° humeral inclination, 36 + 4 mm lateralized glenosphere (n = 141)) and group 3 (onlay, 145° humeral inclination, + 3 mm lateralized base plate, 36 + 2 mm eccentric glenosphere (n = 35)) We compared group differences in clinical outcomes (e.g., active and passive range of motion (ROM), abduction strength, Constant-Murley score (CS)), radiographic evaluations of prosthetic position, scapular anatomy and complications using mixed models adjusted for age and sex.

RESULTS

The final analysis included 226 patients. The overall adjusted p-value of the CS for all time-points showed no significant difference (p = 0.466). Flexion of group 3 (mean, 155° (SD 13)) was higher than flexion of group 1 (mean, 142° (SD 18) and 2 (mean, 132° (SD 18) (p < 0.001). Values for abduction of group 3 (mean, 145° (SD 23)) were bigger than those of group 1 (mean, 130° (SD 22)) and group 2 (mean, 118° (SD 25)) (p < 0.001). Mean external rotation for group 3 (mean, 41° (SD 23)) and group 2 (mean, 38° (SD 17)) was larger than external rotation of group 1 (mean, 24° (SD 16)) (p < 0.001); a greater proportion of group 2 (78%) and 3 (69%) patients reached L3 level on internal rotation compared to group 1 (44%) (p = 0.003). Prosthesis position measurements were similar, but group 3 had significantly less scapular notching (14%) versus 24% (group 2) and 50% (group 1) (p = 0.001).

CONCLUSIONS

Outcome scores of different RSA designs for CTA revealed comparable results. However, CTA patients with a lateralized and distalized RSA configuration were associated with achieving better flexion and abduction with less scapular notching. A better rotation was associated with either of the lateralized RSA designs in comparison with the classic Grammont prosthesis.

LEVEL OF EVIDENCE

Therapeutic study, Level III.

Can we develop consensus on long-term follow-up and surveillance of primary shoulder arthroplasty? A study protocol using a real-time Delphi technique among expert clinicians in the UK

BACKGROUND

Shoulder arthroplasty incidence is projected to continue its exponential growth and the resultant burden of monitoring patients with shoulder arthroplasty implants creates significant pressure on orthopaedic services. Surveillance offers the opportunity to study implant longevity, detect failing implants and potentially perform revision at lower morbidity and cost. There is a paucity of evidence to support recommendations on long-term follow-up in shoulder arthroplasty. Prospective studies comparing long-term follow-up and structure are impractical from time, resource and cost perspectives. A real-time Delphi technique represents a mechanism by which experts involved in long-term follow-up of primary shoulder arthroplasty can formulate recommendations via a transparent, reproducible and efficient process. We outline the protocol for a real-time Delphi study seeking consensus on long-term follow-up and surveillance of primary shoulder arthroplasty .

METHODS

A real-time Delphi technique will be used. A planning committee will design the Delphi statements. A steering committee will supervise and monitor the real-time Delphi process. Participants will be asked to rate their agreement with statements using a 5-point Likert scale. The Delphi statements will be derived from review of published literature, and the strength of evidence available for each statement will be provided. We will offer participation to all surgeons and extended-scope practitioners who are current members of the British Elbow & Shoulder Society (BESS) and have clinical practice involving shoulder arthroplasty follow-up. The questionnaire will be active for 4 weeks and requires a minimum of 20 participants. Consensus agreement is defined as 70% of participants selecting at least a 4-point on a 5-point Likert scale.

DISCUSSION

We anticipate the outlined study will achieve consensus on long-term follow-up and surveillance of primary shoulder arthroplasty. We intend to use the expert consensus recommendations achieved, in addition to the limited applicable published evidence available, to produce BESS-affiliated guidelines on long-term follow-up and surveillance of primary shoulder arthroplasty.EthicsEthical approval is not required for the real-time Delphi study.We expect the results of this initiative will be published in a peer-reviewed, high-impact journal.

Influence of sportive activity on functional and radiographic outcomes following reverse total shoulder arthroplasty: a comparative study

BACKGROUND

The purpose of the present study was to compare the functional and radiographic outcomes following reverse total shoulder arthroplasty (RTSA) in a senior athletic and non-athletic population.

MATERIAL AND METHODS

In this retrospective cohort study, patients who underwent RTSA between 06/2013 and 04/2018 at a single institution were included. Minimum follow-up was 2 years. A standardized questionnaire was utilized for assessment of patients' pre- and postoperative physical fitness and sportive activity. Patients who resumed at least one sport were assigned to the athletic group, while patients who ceased participating in sports were assigned to the non-athletic group. Postoperative clinical outcome measures included the Constant score (CS), American Shoulder and Elbow Surgeons (ASES) score, Simple Shoulder Test (SST), and visual analog scale (VAS) for pain. Active shoulder range of motion (ROM) and abduction strength were assessed. Radiographic evaluation was based on a standardized core set of parameters for radiographic monitoring of patients following shoulder arthroplasty.

RESULTS

Sixty-one of 71 patients (85.9%; mean age: 72.1 ± 6.6 years) were available for clinical and radiographic follow-up at a mean of 47.1 ± 18.1 months. Thirty-four patients (55.7%) were assigned to the athletic group and 27 patients (44.3%) to the non-athletic group. The athletic group demonstrated significantly better results for CS (P = 0.002), ASES score (P = 0.001), SST (P = 0.001), VAS (P = 0.022), active external rotation (P = 0.045) and abduction strength (P = 0.016) compared to the non-athletic group. The overall rate of return to sport was 78.0% at an average of 5.3 ± 3.6 months postoperatively. Incomplete radiolucent lines (RLL) around the humeral component were found significantly more frequently in the athletic group compared to the non-athletic group (P = 0.019), whereas the occurrence of complete RLLs around the implant components was similar (P = 0.382). Scapular notching was observed in 18 patients (52.9%) of the athletic group and 12 patients (44.9%) of the non-athletic group (P = 0.51). The overall rate for revision surgery was 8.2%, while postoperative complications were encountered in 3.3% of cases.

CONCLUSION

At mid-term follow-up, the athletic population demonstrated significantly better clinical results following RTSA without a higher rate of implant loosening and scapular notching when compared to non-athletic patients. However, incomplete radiolucency around the humeral component was observed significantly more often in the athletic group.

LEVEL OF EVIDENCE

III.

Evaluation of the Painful Total Shoulder Arthroplasty

Despite the overall success of anatomic and reverse total shoulder arthroplasties (aTSA and rTSA), some patients continue to have or develop pain postoperatively. As the number of shoulder arthroplasties continues to increase in the United States, it is important that surgeons are able to recognize, diagnose, and treat the various pathologies. Some painful etiologies are specific to either aTSA or rTSA, and others can occur with both implant types. Infections, stiffness, neurologic syndromes, polyethylene wear, aseptic implant loosening, and metal allergies occur, regardless of implant choice. However, after an aTSA, subscapularis repair failure, superior rotator cuff tear, and joint overstuffing can result in shoulder pain. After a rTSA, specific causes of postoperative pain include instability, scapular notching, acromial or scapular spine fractures, subcoracoid pain, and neurologic injury. Regardless of the diagnosis, the surgeon must be methodical in the evaluation and, when appropriate, use blood work, advanced imaging studies, joint aspirations, shoulder arthroscopy, and nerve studies. Once diagnosed, appropriate treatment should be undertaken to resolve the cause of the pain or at least minimize the effect of the pain on the patient's outcome.

Lateralized vs. classic Grammont-style reverse shoulder arthroplasty for cuff deficiency Hamada stage 1-3: does the design make a difference?

BACKGROUND

Reverse shoulder arthroplasty (RSA) with a lateralized design is thought to improve outcomes. Our aim was to compare RSA with the classic Grammont prosthesis against a prosthesis with 135° inclination and a lateralized glenosphere for cuff-deficient shoulders.

METHODS

Patients with irreparable massive posterosuperior rotator cuff tear Hamada grade 1-3 underwent RSA and were documented prospectively up to 24 months postsurgery. Comparative RSA groups were "lateralized" (L), with 135° humeral inclination and 36+4-mm lateralized glenosphere (n = 44), and "Grammont" (G), with 155° humeral inclination and 36+2-mm eccentric glenosphere (n = 23). Range of motion including the Apley scratch test, abduction strength, Constant-Murley score (CS), and Shoulder Pain and Disability Index (SPADI) were assessed. Anteroposterior and axial radiographs were evaluated at 24 months, and additional measurements of scapular neck and glenoid anatomy, baseplate and glenosphere position, center of rotation, humeral offset, and lateralization and distalization shoulder angles were made. Linear regression and mixed models adjusted for sex differences and preoperative values were applied.

RESULTS

Overall CS and SPADI outcomes were not significantly different between groups (P ≥ .654). For group L, external rotation remained stable up to the 2-year follow-up and was higher than for group G (P = .012 ); a greater proportion of group L patients could reach the lumbar vertebra 3 (L3) (70% vs. 48% in group G) (P = .26). Group G had a higher inferior glenosphere overhang (P = .020) and center of rotation (COR) medialization (P < .001), whereas group L had higher humeral offset (P < .001) and lateralization shoulder angle (P < .001) with a trend toward higher baseplate positioning (P = .045). The rate of scapular notching was 2.9 times higher for group G than group L (P = .001).

CONCLUSION

RSA with 135° humeral inclination and a lateralized glenosphere shows similar outcome scores as the classic Grammont design but enables better preservation of external rotation and reduces the rate of scapular notching compared with the classic Grammont design in Hamada 1-3 patients with irreparable posterosuperior tears.

Radiographic changes around the glenoid component in primary reverse shoulder arthroplasty at mid-term follow-up

BACKGROUND

Some local events after reverse shoulder arthroplasty (RSA) occur without the patient experiencing symptoms and yet may be detected on diagnostic imaging, thereby serving as indicators of future complications that may require revision. Most of these events involve the glenoid component, but radiographic studies evaluating this component are scarce, especially medium- and long-term studies. This study aimed to analyze the radiographic changes around the glenoid component and determine the risk factors associated with the presence of these radiographic changes.

MATERIALS AND METHODS

A retrospective review of 105 primary Grammont-style RSAs implanted between 2003 and 2014 was conducted. Radiographic outcomes were evaluated in patients with ≥5 years of radiographic follow-up. Standardized digital radiographs obtained immediately postoperatively and at a minimum follow-up time of 5 years were analyzed to determine (1) glenoid component position (inclination and height) and (2) minor radiographic changes (Sirveaux grade 1 or 2 scapular notching; nondisplaced acromial fracture; radiolucent lines around 1 or 2 screws; Brooker grade 1a, 1b, or 2 heterotopic calcifications; or single screw rupture), as well as major radiographic changes (Sirveaux grade 3 or 4 scapular notching; radiolucent lines around ≥3 screws or central peg; Brooker grade 1c or 3 heterotopic calcifications; prosthetic dislocation; loosening or migration; or disassembly).

RESULTS

Major radiologic changes were identified in 14.3% of the cases. Bivariate analysis showed that more changes were associated with the arthroplasties implanted in the first years of the study (odds ratio [OR] = 0.81, P = .012). This time-related variable was also associated with inclination (OR = 0.88, P = .045) and height (OR = 0.75, P = .001), improving in arthroplasties implanted in the last years of the study. Multivariate analysis revealed an increased risk of severe scapular notching mainly associated with superior tilt (OR = 2.52, P = .036) and a high (OR = 2.68, P = .019) or excessively high (OR = 7.55, P = .013) position and an increased risk of loosening signs associated with superior tilt (OR = 8.92, P = 9.1 × 10^-6).

CONCLUSIONS

The percentage of radiologic changes of the glenoid component in RSA is considerable, despite the detection of a decrease in their presence among the arthroplasties implanted outside the initial period. Superior tilt and an excessively high position appear to be associated with a severe degree of scapular notching development and increased risk of radiographic loosening signs. Knowledge of the factors associated with major radiologic changes in the medium-term follow-up will help to optimize the primary surgical technique for each patient and indication, improving implant survival in primary RSA surgery.

Impact of Sports Activity on Medium-Term Clinical and Radiological Outcome after Reverse Shoulder Arthroplasty in Cuff Deficient Arthropathy; An Institutional Register-Based Analysis

There is a lack of consensus on what physicians can recommend and what patients can expect concerning sports activity after reverse shoulder arthroplasty (RSA). The purpose of this retrospective register-based observational study was to investigate the association between participation in sports or physical activity involving the upper extremity and 5-year clinical and radiological outcomes for primary RSA patients. We screened the institutional arthroplasty registry for patients reporting the type and level of sports postoperatively after primary, unilateral RSA due to rotator cuff deficiency. One hundred thirty-eight patients with clinical and radiological outcomes documented at a minimum 5-year follow-up were divided into three groups comprising those who participated regularly in: sports mainly involving the upper extremity (sports upper extremities, SUE, n = 49), sports mainly involving the lower extremities (sports lower extremities, SLE, n = 21), and those who did not participate in sports at all (no sports, NS, n = 68). The participants had a mean age of 72 years (standard deviation (SD) 8) and were overall predominantly female patients (62%). Primary clinical outcomes included the Constant Score (CS) and Shoulder Pain and Disability Index (SPADI). Secondary radiographs were analyzed for radiolucent lines (RLL), signs of glenoid or humeral prosthesis loosening, bone resorption, bone formation, and scapular notching. A total number of 8 senior surgeons were involved in treatment of patients, and two types of prosthesis were used. The SUE group had non-significantly higher mean scores for CS (75 points) and SPADI (88 points) compared to SLE (71 and 78 points, respectively) and NS patients (66 and 78 points, respectively) (p ≥ 0.286). The incidence of RLL around the humeral diaphysis was higher in NS compared to SUE patients (32% versus 12%, respectively) (p = 0.025); all other radiological parameters were similar between the groups. There were no cases of loosening in the SUE group that led to revision surgery. Patients engaging in sports activities involving the upper extremity show similarly good functional scores 5 years post-RSA as the other groups, without additional signs of implant loosening as a result of increased shoulder use.

Glenoid Component Loosening in Anatomic Total Shoulder Arthroplasty: Association between Radiological Predictors and Clinical Parameters-An Observational Study

The mechanisms of glenoid component loosening in anatomic total shoulder arthroplasty (aTSA) are still unclear, and it remains undetermined which specific radiographic features are associated with clinical outcomes. Patients with primary osteoarthritis who underwent aTSA with a stemless implant and a pegged glenoid between January 2011 and December 2016 were extracted from a local registry. Anteroposterior radiographs were evaluated at six, 12, 24 months, and five years post-TSA for lateral humeral offset (LHO), joint gap (JG), acromiohumeral distance (AHD), and radiolucency (modified Franklin score); 147 patients were included. Mixed-model linear regression was used. Both constant score (CS) and subjective shoulder value (SSV) markedly decreased at five years follow-up compared to one year (p < 0.001 for both). AHD, LHO, and JG all showed a consistent and statistically significant decline over time, with the joint gap decreasing by half. Consistently, smaller JG and AHD were correlated with lower SSV (p = 0.03 and p = 0.07, respectively). Massive loosening was associated with a 14.5 points lower SSV (p < 0.01). Finally, narrowing of the JG was significantly correlated with increased radiolucency (p < 0.001) and tended toward worse SSV (p = 0.06). In summary, radiographic parameters displaying medialization and cranialization after aTSA with a cemented pegged glenoid are useful predictors of impaired shoulder function.

The Schulthess local Shoulder Arthroplasty Registry (SAR): cohort profile

PURPOSE

Clinical registries are essential for evaluation of surgical outcomes. The Schulthess Shoulder Arthroplasty Registry (SAR) was established in 2006 to evaluate safety, function, quality-of-life and patient satisfaction in patients undergoing shoulder arthroplasty.

PARTICIPANTS

Adult patients undergoing anatomic or reverse shoulder joint replacement at the Schulthess Klinik, a high-volume, leading orthopaedic surgery centre in Zürich, Switzerland.

FINDINGS TO DATE

Between March 2006 and December 2019, the registry covered 98% of eligible operations. Overall, 2332 patients were enrolled with a total of 2796 operations and 11 147 person-years of follow-up. Mean age at baseline was 71 (range: 20-95), 65% were women. Most common indication was rotator cuff tears with osteoarthritis (42%) and the mean preoperative Constant Score was 31 (±15). The most frequent arthroplasty type was reverse, increasing from 61% in 2006-2010 to 86% in 2015-2019. Functional recovery peaked at 12-month postoperatively and did not show a clinically relevant deterioration during the first ten follow-up years. Since its establishment, the registry was used to address multiple pertinent clinical and methodological questions. Primary focus was on comparing different implant configurations (eg, glenosphere diameter) and surgical techniques (eg, latissimus dorsi transfer) to maximise functional recovery. Additionally, the cohort contributed to the determination of the clinical relevance and validity of radiological monitoring of cortical bone resorption and scapular notching. Finally, SAR data helped to demonstrate that returning to sports was among key patient expectations after reverse shoulder arthroplasty.

FUTURE PLANS

As first patients are approaching the 15 years follow-up landmark, the registry will continue providing essential data on long-term functional outcomes, implant stability, revision rates and aetiologies as well as patient satisfaction and quality-of-life. In addition to research and quality-control, the cohort data will be brought back to the patients by bolstering real-time clinical decision support.

Short-term safety, function, and quality of life in patients treated with Univers Revers prosthesis: a multicenter 2-year follow-up case series

BACKGROUND

The use of reverse total shoulder arthroplasty (RTSA) has dramatically increased in recent years with the advent of new prosthesis designs regularly entering the market. We define the rate of local complications during the first 2 years after RTSA with the Univers Revers prosthesis and describe the changes in radiologic outcomes, as well as function, pain, satisfaction, and quality of life.

METHODS

This multicenter, prospective case series included rotator cuff tear arthropathy patients who underwent RTSA with the Univers Revers. Incidence percentages of complications and pathologic radiographic changes were documented. Mixed-model linear regression was used to examine changes in range of motion, shoulder function (Constant score, Shoulder Pain and Disability Index, Subjective Shoulder Value), and quality of life (EQ-5D-5L [European Quality of Life 5 Dimensions 5 Level] and EQ-VAS [EuroQol Visual Analog Scale]).

RESULTS

Of 187 patients, 59.4% were women, and the mean age was 75.3 years (range, 56-91 years). Twenty-five percent of patients had a postoperative complication; 5 complications were severe (2.7%, 5 of 187), whereby 2 were implant related (1.1%; 95% confidence interval [CI], 0.1%-3.8%). The incidence of scapular notching was 10.6% (95% CI, 6.5%-16%). After 2 years, abduction, flexion, and abduction strength improved by 54° (95% CI, 50°-58°), 57° (95% CI, 53°-60°), and 5 kg (95% CI, 4-5 kg), respectively (P < .001), whereas external rotation at 0° (1°; 95% CI, -1° to 3°) did not improve (P = .4). The Constant score improved by 39 (95% CI, 38-41); Shoulder Pain and Disability Index, by 50 (95% CI, 47-52); and Subjective Shoulder Value, by 43 (95% CI, 41-45) (P < .001). Furthermore, the EQ-5D-5L index value improved by 0.31 (95% CI, 0.30-0.33), and the EQ-VAS score improved by 16 (95% CI, 14-18) (P < .001).

CONCLUSION

Our case series showed a low complication rate with a consistent clinically relevant and statistically significant improvement across most clinical and patient-reported outcomes for the Univers Revers. Long-term safety requires further investigation.

Complications after surgical management of proximal humeral fractures: a systematic review of event terms and definitions

BACKGROUND

The most frequently used surgical procedures for treating a proximal humeral fracture (PHF) are plate osteosynthesis, nail osteosynthesis and arthroplasty. Evidence-based recommendations for an appropriate surgical procedure after PHF requires transparent and valid safety data. We performed a systematic review to examine reported terms and definitions of complications after surgically-treated PHFs.

METHODS

A literature search was conducted on PubMed, Cochrane Library, EMBASE, Scopus and WorldCat to identify clinical articles and book chapters on complications of PHF published from 2010 to 2017. Complication terms and definitions were extracted from each selected article independently by two reviewers and grouped according to a predefined scheme.

RESULTS

From 1376 initial references, we selected 470 articles, of which 103 were reviewed in reverse chronological order until no further information was gained. Twelve book chapters were reviewed. We found 667 local event terms associated with complications after surgical treatment of PHFs. The most frequently used event terms were infection (52 references), nonunion (n = 42), malunion (n = 35), avascular necrosis (n = 27) and pain (n = 25). Overall, 345, 177, 257 and 102 local event terms were related to plating, nailing, arthroplasty and other surgical techniques, respectively. Radiological assessment was the basis for the majority of event terms and complication definitions. Thirty-six event definitions were extracted, mostly defining the terms "secondary fracture displacement", "screw perforation/cutout", "malunion", "delayed healing" and "notching".

CONCLUSION

Scientific literature on surgically-managed PHF uses different terms to describe complications and without approved definitions, which highlights a lack of agreement on adverse event terminology for PHFs. Defined event terms are mostly based on radiological observations. Consensus among shoulder surgeons on a core event set is indispensable to support the standardization of safety reporting for surgically-treated PHFs.

Core set of unfavorable events of shoulder arthroplasty: an international Delphi consensus process

BACKGROUND

Shoulder arthroplasty (SA) complications require standardization of definitions and are not limited to events leading to revision operations. We aimed to define an international consensus core set of clinically relevant unfavorable events of SA to be documented in clinical routine practice and studies.

METHODS

A Delphi exercise was implemented with an international panel of experienced shoulder surgeons selected by nomination through professional societies. On the basis of a systematic review of terms and definitions and previous experience in establishing an arthroscopic rotator cuff repair core set, an organized list of SA events was developed and reviewed by panel members. After each survey, all comments and suggestions were considered to revise the proposed core set including local event groups, along with definitions, specifications, and timing of occurrence. Consensus was reached with at least two-thirds agreement.

RESULTS

Two online surveys were required to reach consensus within a panel involving 96 surgeons. Between 88% and 100% agreement was achieved separately for local event groups including 3 intraoperative (device, osteochondral, and soft tissue) and 9 postoperative event groups. Experts agreed on a documentation period that ranged from 3 to 24 months after SA for 4 event groups (peripheral neurologic, vascular, surgical-site infection, and superficial soft tissue) and that was lifelong until implant revision for other groups (device, osteochondral, shoulder instability, pain, late hematogenous infection, and deep soft tissue).

CONCLUSION

A structured core set of local unfavorable events of SA was developed by international consensus to support the standardization of SA safety reporting. Clinical application and scientific evaluation are needed.