Oral and transdermal drug delivery systems: role of lipid-based lyotropic liquid crystals

Cubosomes functionalized with antibodies as a potential strategy for the treatment of HER2-positive breast cancer

Breast cancers that overexpress human epidermal growth factor receptor 2 (HER2) have poor prognosis. Moreover, available chemotherapies cause numerous side effects due to poor selectivity. To advance more effective and safer therapies for HER2-positive breast cancer, we explored the fusion of drug delivery technology and immunotherapy. Our research led to the design of immunocubosomes loaded with panobinostat and functionalized with trastuzumab antibodies, enabling precise targeting of breast cancer cells that overexpress HER2. We characterised the nanostructure of cubosomes using small-angle X-ray scattering (SAXS), cryo-transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS). Moreover, we confirmed the integrity of the trastuzumab antibodies on the immunocubosomes by Fourier-transform infrared spectroscopy (FTIR) and sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Additionally, we found that panobinostat-loaded immunocubosomes were more cytotoxic, and in an uptake-dependant manner, towards a HER2-positive breast cancer cell line (SKBR3) compared to a cell line representing healthy cells (L929). These results support that the functionalization of cubosomes with antibodies enhances both the effectiveness of the loaded drug and its selectivity for targeting HER2-positive breast cancer cells.

ROS-scavenging lipid-based liquid crystalline as a favorable stem cell extracellular vesicles delivery vector to promote wound healing

Wound management is a critical clinical challenge due to the dynamic and complex pathological characteristics of inflammation, proliferation, and matrix remodeling. To address this challenge, the regulation and management of this multi-stage pathological microenvironment may provide a feasible approach to wound healing. In this work, we synthesized a new lipid material (DA) with reactive oxygen species (ROS) scavenging effect to prepare DA-based liquid crystalline (DALC). Then, DALC was incorporated with adipose mesenchymal stem cells-derived extracellular vesicles (AMSC-EVs) to fabricate a novel scaffold dressing (EVs@DALC) for the treatment of the wound. DALC not only endowed EVs@DALC with ROS scavenging sites for relieving the oxidative stress and inflammation in the microenvironment of the wound site, but also facilitated cellular uptake and transfection of microRNA and growth factors contained in AMSC-EVs. Benefiting from DALC, AMSC-EVs effectively transferred microRNA and growth factors into the skin cells to induce cell proliferation and migration and accelerate angiogenesis. The results of wound healing effect in vivo indicate EVs@DALC achieved multi-stage pathological modulation for accelerating wound healing through alleviating inflammation, promoting cell proliferation and migration, and angiogenesis. Taken together, this work provides an effective strategy based on antioxidant lipid liquid crystalline delivering extracellular vesicles in treating skin wounds and paves a way for stem cell extracellular vesicles clinical translation.

Photocleavable Polymer Cubosomes: Synthesis, Self-Assembly, and Photorelease

Polymer cubosomes (PCs) are a recent class of self-assembled block copolymer (BCP) microparticles with an accessible periodic channel system. Most reported PCs consist of a polystyrene scaffold, which provides mechanical stability for templating but has a limited intrinsic functionality. Here, we report the synthesis of photocleavable BCPs with compositions suitable for PC formation. We analyze the self-assembly mechanism and study the model release of dyes during irradiation, where the transition of the BCPs from amphiphilic to bishydrophilic causes the rapid disassembly of the PCs. A combination of modeling and experiment shows that the evolution of PCs proceeds first via liquid-liquid phase separation into polymer-rich droplets, followed by microphase separation within this droplet confinement, and finally, membrane reorganization into high internal order. This insight may encourage exploration of alternative preparation strategies to better control the size and homogeneity of PCs.

Cubic liquid crystals containing propolis flavonoids as in situ thermo-sensitive hydrogel depots for periodontitis treatment: Preparation, pharmacodynamics and therapeutic mechanisms

Propolis has a long ethnopharmacological history for oral periodontal diseases treatment. Propolis flavonoids are main active components for anti-inflammation and tissue protection. However, the intractable dissolution properties of propolis flavonoids and complex oral environment pose great challenges for periodontal delivery. In addition, the therapeutic mechanism as well as the therapeutic correlation of inflammation resolution and tissue regeneration remain unclear for propolis flavonoids. In this study, we constructed an in situ thermosensitive depot systems using total flavonoids from propolis-loaded cubic liquid crystals (TFP-CLC) hydrogel for periodontal delivery. TFP-CLC inhibited inflammatory cell infiltration, reactive oxygen species and the expression of inflammatory cytokines of NF-κB and IL-1β. In addition, alveolar bone and collagen were significantly regenerated after TFP-CLC administration according to micro-CT and immunohistochemistry. Mechanism studies suggested that TFP-CLC alleviated inflammation and promoted alveolar bone repair via regulating TLR4/MyD88/NF-κB p65 and RANK/NF-κB signaling pathways, respectively. Correlation analysis further confirmed that the inflammatory resolution produced by TFP-CLC could accelerate periodontal tissue regeneration. In summary, TFP-CLC is a promising multifunctional in situ thermo-sensitive hydrogel depots for periodontitis treatment.

Pluronic 123 Liquid Lyotropic Crystals for Transdermal Delivery of Caffeic Acid-Insights from Structural Studies and Drug Release

BACKGROUND

This study aims to evaluate the percutaneous permeation profiles of caffeic acid (CA) from the cubic and hexagonal liquid crystalline phases of Pluronic P123/water mixtures.

METHOD

The resulting drug-loaded mesophases were subjected to characterisation through deuterium nuclear magnetic resonance spectroscopy and polarised optical microscopy observations. These analyses aimed to evaluate the structural changes that occurred in the mesophases loading with CA. Additionally, steady and dynamic rheology studies were conducted to further explore their mechanical properties and correlate them to the supramolecular structure. Finally, CA release experiments were carried out at two different temperatures to examine the behaviour of the structured systems in a physiological or hyperthermic state.

RESULTS

As the concentration of the polymer increases, an increase in the viscosity of the gel is noted; however, the addition of caffeic acid increases microstructure fluidity. It is observed that the temperature effect conforms to expectations. The increase in temperature causes a decrease in viscosity and, consequently, an increase in the rate of permeation of caffeic acid.

CONCLUSIONS

The CA permeation profile from the prepared formulations is mostly dependent on the structural organisation and temperature. Cubic mesophase LLC 30/CA showed greater skin permeation with good accumulation in the skin at both tested temperatures.

Delivery Strategies for Colchicine as a Critical Dose Drug: Reducing Toxicity and Enhancing Efficacy

Colchicine (COL), a widely used natural drug, has potent anti-inflammatory effects; however, as a narrow therapeutic index drug, its clinical application is limited by its serious gastrointestinal adverse effects, and only oral formulations are currently marketed worldwide. Recent studies have shown that transdermal, injection, and oral drug delivery are the three main delivery strategies for COL. This article elaborates on the research progress of different delivery strategies in terms of toxicity reduction and efficacy enhancement, depicting that the transdermal drug delivery route can avoid the first-pass effect and the traumatic pain associated with the oral and injection routes, respectively. Therefore, such a dosage form holds a significant promise that requires the development of further research to investigate effective COL delivery formulations. In addition, the permeation-promoting technologies utilized for transdermal drug delivery systems are briefly discussed. This article is expected to provide scientific ideas and theoretical guidance for future research and the exploration of COL delivery strategies.

Sustain-release lipid-liquid crystal formulations of pexiganan against Helicobacter pylori infection: in vitro evaluation in C57BL/6 mice

INTRODUCTION

The Gram-negative bacterium Helicobacter pylori, H. pylori, is associated with significant digestive disorders. However, the effectiveness of bacterial eradication is declining due to drug resistance. A potent anti-H. pylori activity is shown by the natural antimicrobial peptide pexiganan.

OBJECTIVE

The current study aimed to evaluate the effectiveness of pexiganan and its lipid-liquid crystals (LLCs) in inducing Helicobacter pylori in mice.

METHODS

In this experimental study, H. pylori infection was first induced in C57BL/6 mice. Secondly, the antibacterial efficacy of pexiganan and its LLCs formulations was investigated to eliminate H. pylori infection.

RESULTS

The H. pylori infection could not be completely eradicated by pexiganan peptide alone. However, incorporating pexiganan within the LLC formulation resulted in an increased elimination of H. pylori. Under the H&E strain, the pexiganan-LLCs formulation revealed minimal mucosal alterations and a lower amount of inflammatory cell infiltration in the stomach compared to the placebo.

CONCLUSION

Clarithromycin was more effective than pexiganan at all tested concentrations. Furthermore, the pexiganan-loaded LLCs exhibited superior efficacy in curing H. pylori infection in a mouse model compared to pexiganan alone. This formulation can enhance H. pylori clearance while mitigating the adverse effects, typically associated with conventional drugs, leading to a viable alternative to current treatment options.

Sustained release gel (polymer-free) of itraconazole-loaded microemulsion for oral candidiasis treatment: time-kill kinetics and cellular uptake

Itraconazole (ICZ) was prepared in a self-microemulsifying (SM) gel. This gel was intended for use in the oral mucosa, where low volume and flow of saliva result in limited solubility and absorption of drugs that are poorly water-soluble. The drug-loaded gel formulation (ICZ-SM) was selected as a clear solution in the ternary phase diagram to improve the solubility of ICZ. Seven ratios (S1-S7) were prepared by mixing polyoxyl 35 castor oils (P35), a medium chain with a blend of mono-, di-, and triglycerides (MCT), and water. Phase separation of large-sized emulsions by countering with artificial saliva were observed in dilution tests for the formulation contained MCT, P35, and water at the ratios of 70:20:10 (S1), 10:80:10 (S3), and 20:60:20 (S4). Formulations in the ratios of 15:50:35 (S5) and 19:43:38 (S6) produced strong ICZ-SM gels, as shown by rheology tests, whereas the formulations at the ratios of 30:60:10 (S2) and 10:43:47 (S7) exhibited no elasticity. A model of zero-order kinetic (S5) and first-order kinetic (S6) were found to best fit the release kinetics of ICZ from the gels. Time-killing assays revealed that S5 and S6 required less time compared with S2 and the ICZ solution. Furthermore, S5 exhibited the highest increase in cell uptake compared with S2, S6, and the ICZ solution. These findings suggest that the ICZ-SM gel was a free polymer capable of delivering an ICZ for the treatment of oral candidiasis, and that ICZ-SM gels applied locally exhibit enhanced absorption into cells.

Lyotropic liquid crystalline phases: Drug delivery and biomedical applications

Liquid crystal (LC)-based nanoformulations may efficiently deliver drugs and therapeutics to targeted biological sites. Lyotropic liquid crystalline phases (LLCPs) have received much interest in recent years due to their unique structural characteristics of both isotropic liquids and crystalline solids. These LLCPs can be utilized as promising drug delivery systems to deliver drugs, proteins, peptides and vaccines because of their improved drug loading, stabilization, and controlled drug release. The effects of molecule shape, microsegregation, and chirality are very important in the formation of liquid crystalline phases (LCPs). Homogenization of self-assembled amphiphilic lipids, water and stabilizers produces LLCPs with different types of mesophases, bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes). Moreover, many studies have also shown higher bioadhesivity and biocompatibility of LCs due to their structural resemblance to biological membranes, thus making them more efficient for targeted drug delivery. In this review, an outline of the engineering aspects of LLCPs and polymer-based LLCPs is summarized. Moreover, it covers parenteral, oral, transdermal delivery and medical imaging of LC in targeting various tissues and is discussed with a scope to design more efficient next-generation novel nanosystems. In addition, a detailed overview of advanced liquid crystal-based drug delivery for vaccines and biomedical applications is reviewed.

MOF-Thermogel Composites for Differentiated and Sustained Dual Drug Delivery

In recent years, multidrug therapy has gained increasing popularity due to the possibility of achieving synergistic drug action and sequential delivery of different medical payloads for enhanced treatment efficacy. While a number of composite material release platforms have been developed, few combine the bottom-up design versatility of metal-organic frameworks (MOFs) to tailor drug release behavior, with the convenience of temperature-responsive hydrogels (or thermogels) in their unique ease of administration and formulation. Yet, despite their potential, MOF-thermogel composites have been largely overlooked for simultaneous multidrug delivery. Herein, we report the first systematic study of common MOFs (UiO-66, MIL-53(Al), MIL-100(Fe), and MOF-808) with different pore sizes, geometries, and hydrophobicities for their ability to achieve simultaneous dual drug release when embedded within PEG-containing thermogel matrices. After establishing that MOFs exert small influences on the rheological properties of the thermogels despite the penetration of polymers into the MOF pores in solution, the release profiles of ibuprofen and caffeine as model hydrophobic and hydrophilic drugs, respectively, from MOF-thermogel composites were investigated. Through these studies, we elucidated the important role of hydrophobic matching between MOF pores and loaded drugs in order for the MOF component to distinctly influence drug release kinetics. These findings enabled us to identify a viable MOF-thermogel composite containing UiO-66 that showed vastly different release kinetics between ibuprofen and caffeine, enabling temporally differentiated yet sustained simultaneous drug release to be achieved. Finally, the MOF-thermogel composites were shown to be noncytotoxic in vitro, paving the way for these underexploited composite materials to find possible clinical applications for multidrug therapy.

Mechanistic Study of Amphiphilic-Assisted Self-Assembled Cadmium Sulfide Quantum Dots into 3D Superstructures

Self-assembling of nanoparticles into complex superstructures is very challenging, which usually depends on postorganizing techniques or pre-existing templates such as polypeptide chains or DNA or external stimulus. Such self-assembled processes typically lead to close-packed structures. Here, it has been demonstrated that under carefully template-free reaction conditions CdS quantum dots (QDs) could be synthesized and simultaneously self-assembled into complex superstructures without compromising individual QD properties. The superstructures of CdS QDs attained by the chemical-based method demonstrate Stokes-shifted photoluminescence (PL) from trap states. Remarkably, the PL decay of superstructures exhibits a single-exponential feature. This behavior is unusual for the synthesized superstructures, indicating that the trap states are restricted to a narrow range. The growth mechanism of these superstructures is explained through the formation of liquid crystal phases (LCPs) with the help of a small-angle X-ray scattering (SAXS) analysis.

Lycorine transfersomes modified with cell-penetrating peptides for topical treatment of cutaneous squamous cell carcinoma

BACKGROUND

Topical anticancer drugs offer a potential therapeutic modality with high compliance for treating cutaneous squamous cell carcinoma (cSCC). However, the existing topical treatments for cSCC are associated with limited penetrating ability to achieve the desired outcome. Therefore, there remains an urgent requirement to develop drugs with efficient anticancer activity suitable for treating cSCC and to overcome the skin physiological barrier to improve the efficiency of drug delivery to the tumor.

RESULTS

We introduced lycorine (LR) into the topical treatment for cSCC and developed a cell-penetrating peptide (CPP)-modified cationic transfersome gel loaded with lycorine-oleic acid ionic complex (LR-OA) (LR@DTFs-CPP Gel) and investigated its topical therapeutic effects on cSCC. The anti-cSCC effects of LR and skin penetration of LR-OA transfersomes were confirmed. Simultaneously, cationic lipids and modification of R5H3 peptide of the transfersomes further enhanced the permeability of the skin and tumor as well as the effective delivery of LR to tumor cells.

CONCLUSIONS

Topical treatment of cSCC-xenografted nude mice with LR@DTFs-CPP Gel showed effective anticancer properties with high safety. This novel formulation provides novel insights into the treatment and pathogenesis of cSCC.

Lipidic lyotropic liquid crystals: Insights on biomedical applications

Liquid crystals (LCs) possess unique physicochemical properties, translatable into a wide range of applications. To date, lipidic lyotropic LCs (LLCs) have been extensively explored in drug delivery and imaging owing to the capability to encapsulate and release payloads with different characteristics. The current landscape of lipidic LLCs in biomedical applications is provided in this review. Initially, the main properties, types, methods of fabrication and applications of LCs are showcased. Then, a comprehensive discussion of the main biomedical applications of lipidic LLCs accordingly to the application (drug and biomacromolecule delivery, tissue engineering and molecular imaging) and route of administration is examined. Further discussion of the main limitations and perspectives of lipidic LLCs in biomedical applications are also provided. STATEMENT OF SIGNIFICANCE: Liquid crystals (LCs) are those systems between a solid and liquid state that possess unique morphological and physicochemical properties, translatable into a wide range of biomedical applications. A short description of the properties of LCs, their types and manufacturing procedures is given to serve as a background to the topic. Then, the latest and most innovative research in the field of biomedicine is examined, specifically the areas of drug and biomacromolecule delivery, tissue engineering and molecular imaging. Finally, prospects of LCs in biomedicine are discussed to show future trends and perspectives that might be utilized. This article is an ampliation, improvement and actualization of our previous short forum article "Bringing lipidic lyotropic liquid crystal technology into biomedicine" published in TIPS.

Design and Characterization of Lipid-Surfactant-Based Systems for Enhancing Topical Anti-Inflammatory Activity of Ursolic Acid

Skin inflammation is a symptom of many skin diseases, such as eczema, psoriasis, and dermatitis, which cause rashes, redness, heat, or blistering. The use of natural products with anti-inflammatory properties has gained importance in treating these symptoms. Ursolic acid (UA), a promising natural compound that is used to treat skin diseases, exhibits low aqueous solubility, resulting in poor absorption and low bioavailability. Designing topical formulations focuses on providing adequate delivery via application to the skin surface. The aim of this study was to formulate and characterize lipid-surfactant-based systems for the delivery of UA. Microemulsions and liquid crystalline systems (LCs) were characterized by polarized light microscopy (PLM), rheology techniques, and textural and bioadhesive assays. PLM supported the self-assembly of these systems and elucidated their formation. Rheologic examination revealed pseudoplastic and thixotropic behavior appropriate, and assays confirmed the ability of these formulations to adhere to the skin. In vivo studies were performed, and inflammation induced by croton oil was assessed for response to microemulsions and LCs. UA anti-inflammatory activities of ~60% and 50% were demonstrated by two microemulsions and 40% and 35% by two LCs, respectively. These data support the continued development of colloidal systems to deliver UA to ameliorate skin inflammation.

Automation of liquid crystal phase analysis for SAXS, including the rapid production of novel phase diagrams for SDS-water-PIL systems

Lyotropic liquid crystal phases (LCPs) are widely studied for diverse applications, including protein crystallization and drug delivery. The structure and properties of LCPs vary widely depending on the composition, concentration, temperature, pH, and pressure. High-throughput structural characterization approaches, such as small-angle x-ray scattering (SAXS), are important to cover meaningfully large compositional spaces. However, high-throughput LCP phase analysis for SAXS data is currently lacking, particularly for patterns of multiphase mixtures. In this paper, we develop semi-automated software for high throughput LCP phase identification from SAXS data. We validate the accuracy and time-savings of this software on a total of 668 SAXS patterns for the LCPs of the amphiphile hexadecyltrimethylammonium bromide (CTAB) in 53 acidic or basic ionic liquid derived solvents, within a temperature range of 25-75 °C. The solvents were derived from stoichiometric ethylammonium nitrate (EAN) or ethanolammonium nitrate (EtAN) by adding water to vary the ionicity, and adding precursor ions of ethylamine, ethanolamine, and nitric acid to vary the pH. The thermal stability ranges and lattice parameters for CTAB-based LCPs obtained from the semi-automated analysis showed equivalent accuracy to manual analysis, the results of which were previously published. A time comparison of 40 CTAB systems demonstrated that the automated phase identification procedure was more than 20 times faster than manual analysis. Moreover, the high throughput identification procedure was also applied to 300 unpublished scattering patterns of sodium dodecyl-sulfate in the same EAN and EtAN based solvents in this study, to construct phase diagrams that exhibit phase transitions from micellar, to hexagonal, cubic, and lamellar LCPs. The accuracy and significantly low analysis time of the high throughput identification procedure validates a new, rapid, unrestricted analytical method for the determination of LCPs.

QbD-based optimization of raloxifene-loaded cubosomal formulation for transdemal delivery: ex vivo permeability and in vivo pharmacokinetic studies

Raloxifene (RLX) is a drug that is commonly recommended to postmenopausal women at high risk of invasive breast cancer and to prevent osteoporosis. However, limited water solubility (0.000512 mg/ml) and low oral bioavailability (2%) of RLX limit its therapeutic utility. The objective of the present study was to develop an alternative transdermal delivery of RLX to improve its absorption, bypass first pass metabolism, and subsequently improve bioavailability. RLX-loaded cubosomes were prepared using the ethanol injection method followed by microfluidization technique and optimized using the QbD-based 2³ factorial design. The average particle size, entrapment efficiency, and zeta potential of the optimized formulation were found to be 110.6 nm, 98.23%, and 26.2 mV, respectively. In vitro dissolution study indicated that the RLX-loaded cubosomes released 98.26% of the drug compared to pure RLX dispersion (58.6%). Histopathological examination revealed no sign of inflammation, indicating the safety of the developed formulation. Accelerated stability study as per ICH guidelines displayed no significant change in the formulation characteristics and drug-related performance of the developed formulation. Ex vivo permeability studies demonstrated a prolonged release from cubosomal formulation. In vivo pharmacokinetic studies revealed that the relative bioavailability of the optimized transdermal RLX-loaded cubosomes increased by 2.33-fold and 1.22-fold when compared with the oral RLX dispersion and transdermal RLX hydro-ethanolic solution respectively. IVIVC showed level C correlation with linear regression. Thus, the developed RLX-loaded cubosomes may have potential to overcome the problems associated with the existing marketed oral dosage forms of RLX.

Development and optimization of amphiphilic self-assembly into nanostructured liquid crystals for transdermal delivery of an antidiabetic SGLT2 inhibitor

The anti-hyperglycemic sodium glucose co-transporter 2 inhibitor Canagliflozin (CFZ) represents a recent antihyperglycemic modality, yet it suffers from low oral bioavailability. The current work aims to formulate CFZ-loaded transdermal nanostructured liquid crystal gel matrix (NLCG) to improve its therapeutic efficiency. Pre-formulation study included the construction of pseudoternary phase diagrams to explore the effect of two conventional amphiphiles against amphiphilic tri-block copolymer in the formulation of NLCG. The influence of different co-solvents was also investigated with the use of monooleine as the oil. Physical characterization, morphological examination and skin permeation were performed for the optimized formulations. The formula of choice was further investigated for skin irritation and chemical stability. Pharmacodynamic evaluation of the successful formula was conducted on hyperglycemic as well as normoglycemic mice. In addition, oral glucose tolerance test was conducted. Results revealed the supremacy of Poloxamer for stabilizing and maximizing liquid crystal gel (LCG) area percentage that reached up to 12.6%. CFZ-NLCG2 isotropic formula showed the highest permeation parameters; maximum flux value of 7460 μg/cm² h and Q₂₄ of 5327 μg/cm². Pharmacodynamic evaluation revealed the superiority of the antihyperglycemic activity of CFZ-NLCG2 in fasting mice and its equivalence in the oral glucose tolerance test (OGTT) compared to the oral one. The obtained results confirmed the success of CFZ-NLCG2 in the transdermal delivery of CFZ in therapeutically effective concentration compared to the oral route, bypassing first pass effect; in addition, eliminates the possible gastrointestinal side effects related to the inhibition of intestinal sodium glucose co-transporter (SGLT) and maximizes its selectivity to the desired inhibition of renal SGLT.

Chitosan/Lactic Acid Systems: Liquid Crystalline Behavior, Rheological Properties, and Riboflavin Release In Vitro

Chitosan or its derivatives exhibit lyotropic liquid crystalline mesophases under certain conditions due to its semi-rigid structures. This work describes the development of chitosan-based biocompatible systems that include new components: lactic acid and non-ionic surfactants. Polarized optical microscopy studies revealed that these systems are capable of forming gels or lyotropic liquid crystals (LLCs) in a certain range of chitosan and lactic acid concentrations. According to the viscosity studies, the rheological flow of the LLCs can be accurately described by the Casson flow model. The intermolecular interactions of the LLC components were studied by FTIR spectroscopy. According to the FTIR data, hydrogen bonding is supposed to be responsible for the formation of the LLCs. In the studied systems, this LLC complex exists as the [ChitH+·CH3-CH(OH)-COO-] ion pair. The studied gel and LLCs were shown to possess the most prolonged release capabilities for riboflavin among similar binary LLC systems. The supramolecular organization and rheological characteristics of the studied chitosan-based systems were found to affect the release of riboflavin.

Chemical and Pharmacological Properties of Decoquinate: A Review of Its Pharmaceutical Potential and Future Perspectives

Decoquinate (DQ) is an antimicrobial agent commonly used as a feed additive for birds for human consumption. Its use as an additive is well established, but DQ has the potential for therapy as an antimicrobial drug for veterinary treatment and its optimized derivatives and/or formulations, mainly nanoformulations, have antimicrobial activity against pathogens that infect humans. However, DQ has a high partition coefficient and low solubility in aqueous fluids, and these biopharmaceutical properties have limited its use in humans. In this review, we highlight the antimicrobial activity and pharmacokinetic properties of DQ and highlight the solutions currently under investigation to overcome these drawbacks. A literature search was conducted focusing on the use of decoquinate against various infectious diseases in humans and animals. The search was conducted in several databases, including scientific and patent databases. Pharmaceutical nanotechnology and medicinal chemistry are the tools of choice to achieve human applications, and most of these applications have been able to improve the biopharmaceutical properties and pharmacokinetic profile of DQ. Based on the results presented here, DQ prototypes could be tested in clinical trials for human application in the coming years.

Recent advances in versatile inverse lyotropic liquid crystals

Owing to the rapid and significant progress in advanced materials and life sciences, nanotechnology is increasingly gaining in popularity. Among numerous bio-mimicking carriers, inverse lyotropic liquid crystals are known for their unique properties. These carriers make accommodation of molecules with varied characteristics achievable due to their complicated topologies. Besides, versatile symmetries of inverse LCNPs (lyotropic crystalline nanoparticles) and their aggregating bulk phases allow them to be applied in a wide range of fields including drug delivery, food, cosmetics, material sciences etc. In this review, in-depth summary, discussion and outlook for inverse lyotropic liquid crystals are provided.

Rationale utilization of phospholipid excipients: a distinctive tool for progressing state of the art in research of emerging drug carriers

Phospholipids have a high degree of biocompatibility and are deemed ideal pharmaceutical excipients in the development of lipid-based drug delivery systems, because of their unique features (permeation, solubility enhancer, emulsion stabilizer, micelle forming agent, and the key excipients in solid dispersions) they can be used in a variety of pharmaceutical drug delivery systems, such as liposomes, phytosomes, solid lipid nanoparticles, etc. The primary usage of phospholipids in a colloidal pharmaceutical formulation is to enhance the drug's bioavailability with low aqueous solubility [i.e. Biopharmaceutical Classification System (BCS) Class II drugs], Membrane penetration (i.e. BCS Class III drugs), drug uptake and release enhancement or modification, protection of sensitive active pharmaceutical ingredients (APIs) from gastrointestinal degradation, a decrease of gastrointestinal adverse effects, and even masking of the bitter taste of orally delivered drugs are other uses. Phospholipid-based colloidal drug products can be tailored to address a wide variety of product requirements, including administration methods, cost, product stability, toxicity, and efficacy. Such formulations that are also a cost-effective method for developing medications for topical, oral, pulmonary, or parenteral administration. The originality of this review work is that we comprehensively evaluated the unique properties and special aspects of phospholipids and summarized how the individual phospholipids can be utilized in various types of lipid-based drug delivery systems, as well as listing newly marketed lipid-based products, patents, and continuing clinical trials of phospholipid-based therapeutic products. This review would be helpful for researchers responsible for formulation development and research into novel colloidal phospholipid-based drug delivery systems.

Lyotropic Liquid Crystalline Nanostructures as Drug Delivery Systems and Vaccine Platforms

Lyotropic liquid crystals result from the self-assembly process of amphiphilic molecules, such as lipids, into water, being organized in different mesophases. The non-lamellar formed mesophases, such as bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes), attract great scientific interest in the field of pharmaceutical nanotechnology. In the present review, an overview of the engineering and characterization of non-lamellar lyotropic liquid crystalline nanosystems (LLCN) is provided, focusing on their advantages as drug delivery nanocarriers and innovative vaccine platforms. It is described that non-lamellar LLCN can be utilized as drug delivery nanosystems, as well as for protein, peptide, and nucleic acid delivery. They exhibit major advantages, including stimuli-responsive properties for the “on demand” drug release delivery and the ability for controlled release by manipulating their internal conformation properties and their administration by different routes. Moreover, non-lamellar LLCN exhibit unique adjuvant properties to activate the immune system, being ideal for the development of novel vaccines. This review outlines the recent advances in lipid-based liquid crystalline technology and highlights the unique features of such systems, with a hopeful scope to contribute to the rational design of future nanosystems.

Topical Medicine Potency of Musa paradisiaca var. sapientum (L.) kuntze as Oral Gel for Wound Healing: An In Vitro, In Vivo Study

OBJECTIVE

 Topical application of ambonese banana (Musa paradisiaca var. sapientum (L.) kuntze) stem sap gel (GEGPA) on the socket wound area showed an increase in the expression of platelet-derived growth factor-BB, while decrease in the expression of matrix metalloproteinase-2 and 9. The aim of this study is to achieve standard formulation of GEGPA through stability, viscosity, distribution area, and drugs release for oral gel wound healing.

MATERIALS AND METHODS

 This is an in vitro and in vivo study with the randomized posttest only control group design. The gel was formulated according to the composition of each group by adding hydroxypropyl methylcellulose (HPMC), Lexgard, propylene glycol, and cold water to obtain 100 g of gel. Observations were made through the following tests: stability, viscosity, distribution area, drug release, and histopathological analysis of tooth extraction wound healing.

STATISTICAL ANALYSIS

 Data were analyzed using a one-way analysis of variance (α = 0.05) with GraphPad Prism-8 statistical software.

RESULTS

 The study showed that the GEGPA formulation was stable against changes in consistency, color, smell, homogeneity, and pH value. There is a significant difference between groups with respect to viscosity (p = 0.0001), adhesion (p = 0.004), dispersion (p = 0.000), and fibroblast cell numbers on days 3 and 5 (p = 0.007 and p = 0.001). There is no interaction between the active ingredients and the gel base of all formulations. Formulation 3 had better properties in terms of viscosity, broad distribution, and drug release compared with other groups. Application of GEGPA to tooth extraction wounds showed a significant proliferation of fibroblast cells on days 3 and 5.

CONCLUSIONS

 The formulation of M. paradisiaca var. sapientum (L.) kuntze extract with HPMC and propylene glycol obtained a gel preparation, GEGPA, that was organoleptically stable and met the topical gel standard for wounds in the oral cavity.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...

Formation of Self-Assembled Liquid Crystalline Nanoparticles and Absorption Enhancement of Ω-3s by Phospholipids and Oleic Acids

This study aimed to optimize and evaluate self-assembled liquid crystalline nanoparticles (SALCs) prepared from phospholipids and oleic acid for enhancing the absorption of Ω-3s. We explored the structure and optimal formulation of SALCs, which are composed of Ω-3 ethyl ester (Ω-3 EE), phospholipids, and oleic acid, using a ternary diagram and evaluated the improvement in Ω-3 dissolution, permeation, and oral bioavailability. The in vitro dissolution and pharmacokinetics of Ω-3 SALCs were compared with those of Omacor soft capsules (as the reference). The shape of the liquid crystal was determined according to the composition of phospholipids, oleic acids, and Ω-3s and was found to be in cubic, lamellar, and hexagonal forms. The dissolution rates of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) obtained from Ω-3 SALCs were 1.7 to 2.3-fold higher than those of the Omacor soft capsules. Furthermore, a pharmacokinetic study in male beagle dogs revealed that Ω-3 SALCs increased the oral bioavailability of Ω-3 EE by 2.5-fold for EPA and 3.1-fold for DHA compared with the reference. We found an optimal formulation that spontaneously forms liquid crystal-based nanoparticles, improving the bioavailability of EPA and DHA, not found in the existing literature. Our findings offer insight into the impact of nanoparticle phase on the oral delivery of oil-soluble drugs and provide a novel Ω-3 EE formulation that improves the bioavailability of EPA and DHA.

Nanomedicines for the topical treatment of vulvovaginal infections: Addressing the challenges of antimicrobial resistance

Recent years have, surprisingly, witnessed an increase in incidence of sexually transmitted infections (STIs). At the same time, antimicrobial therapy came under the threat of ever rising antimicrobial resistance (AMR), resulting in STIs with extremely limited therapy options. In this review, we addressed the challenges of treating vaginal infections in an era of AMR. We focused on published work regarding nanomedicine destined for localized treatment of vaginal infections. Localized therapy offers numerous advantages such as assuring high drug concentration at the infection site, limiting systemic drug exposure that can lead to faster development of AMR reduction in the systemic side effects and potentially safe therapy in pregnancy. We provided a state-of-the-art overview of nanoformulations proposed to topically treat STIs, emphasizing the challenges and advantages of each type of nanocarriers, as well as issues of potential toxicity.

Quality by design (QbD) in the formulation and optimization of liquid crystalline nanoparticles (LCNPs): A risk based industrial approach

The intersection of lipid-based nanoparticles and lyotropic liquid crystals has provided a novel type of nanocarrier system known as 'lipid-based lyotropic liquid crystals' or 'liquid crystalline nanoparticles' (LCNPs). The unique advantages and immense popularity of LCNPs can be exploited in a better way if the formulation of LCNPs is done using the approach of quality by design (QbD). QbD is a systematic method that can be utilized in formulation development. When QbD is applied to LCNPs formulation, it will proffer many unique advantages, such as better product and process understanding, the flexibility of process within the design space, implementation of more effective and efficient control strategies, easy transfer from bench to bedside, and more robust product. In this work, the application of QbD in the formulation of LCNPs has been explored. The elements of QbD, viz. quality target product profile, critical quality attributes, critical material attributes, critical process parameters, quality risk management, design of experiments, and control strategy for the development of LCNPs have been explained in-depth with case studies. The present work will help the reader to understand the nitty-gritties in the application of QbD in the formulation of LCNPs, and provide a base for QbD-driven formulation of LCNPs with a regulatory perspective.

Current Advances of Nanocarrier Technology-Based Active Cosmetic Ingredients for Beauty Applications

Nanocarrier technology has been effectively applied to the development of drug delivery systems to overcome the limitations of traditional preparation. Its application has been extended to various pharmaceutical fields from injection preparation to oral preparation and external preparation, and now it has appeared in the field of cosmetics for beauty applications. The widespread influence of nanocarrier in the cosmetics industry is due to the fact that nanocarrier can effectively promote the percutaneous penetration and significantly increase skin retention of active components in functional cosmetics. Meanwhile, nanocarrier can effectively improve the water dispersion of insoluble active cosmetic ingredients, enhance the stability of efficacy components and achieve the codelivery of diverse cosmetics active ingredients. In this review, we summarized the current progress of nanocarrier technology in the functional cosmetics, including the types and the routes of dermal/transdermal drug delivery nanocarriers used in the functional cosmetics, the mechanism of nanocarriers promoting the percutaneous penetration of active cosmetic ingredients, the application and efficacy evaluation of different active cosmetic ingredients in nanocarriers and discussing the potential risks to human. This will provide a useful reference for the further development of nanocarriers in the field of functional cosmetics.

A pirfenidone loaded spray dressing based on lyotropic liquid crystals for deep partial thickness burn treatment: healing promotion and scar prophylaxis

A deep partial thickness (DPT) burn injury refers to burn damage involving the epidermis and major dermis, whose prognosis depends greatly on wound management. Lack of effective management can lead to an elongated healing process and aggravated scar formation, which can severely disturb patients, both physically and mentally. A dressing with good water absorption and moderate mechanical properties is crucial for healing promotion, and the prevention of scar formation is highly desirable. In this project, a hyaluronic acid combined lyotropic liquid crystal based spray dressing (HLCSD) loaded with the anti-fibrotic drug pirfenidone (PFD) has been designed. HLCSD is expected to achieve the goals of both wound healing promotion and scar prophylaxis. Its water absorption capacity, mechanical properties, drug release behavior and phase transition are fully evaluated. HLCSD possesses low viscosity for spray administration and high levels of water absorption for exudate absorption. An in situ gel composed of self-assembled lattice nanostructures provides excellent mechanical protection to promote the healing process and steady PFD release to exert a scar prophylaxis effect. The benefit of HLCSD on the wound healing rate is verified in vivo. In the DPT burn wound model we established, HLCSD also exhibits excellent healing promotion effects, and PFD-loaded HLCSD shows scar prophylaxis effects and displays an ideal prognosis, with skin as smooth as healthy skin. The healing promotion of HLCSD is considered to be related to the alleviation of inflammation, with an obviously shortened inflammation phase, with contributions from water management, mechanical protection and anti-inflammation by HLCSD. The scar prophylaxis of PFD-loaded HLCSD is proven to be related to the regulation of collagen synthesis and degradation, involving key cytokines like TGF-β and MMP-1. Taken together, the PFD-loaded HLCSD with healing promotion and scar prophylaxis offers significant promise as a spray dressing for DPT burn injuries.

Significant biopolymers and their applications in buccal mediated drug delivery

Considerable research exercises have been directed towards the development of efficient and safe drug delivery systems. Various materials are used in different pharmaceutical formulations for the development of efficient drug delivery systems in the treatment of disease. Biopolymers are a choice of research as an excipient delivery system due to their biodegradability, low toxicity, safe, stable, and renewable nature. Biopolymers are naturally occurring polymers or polymer matrix composites, that are extracted from animals, bacteria, fungi, and plants. Cellulose, starches are carbohydrate-based polymers, and wool, silk, gelatin, and collagen are protein-based biopolymers. Biopolymers are obtained from various sources but biopolymers, that belong to the carbohydrate origin, have been found very promising in drug delivery through various routes. The review mainly focuses on the biopolymers currently in use for buccal-mediated pharmaceutical drug delivery systems because the buccal route is an efficient drug delivery system that allows direct systemic circulation of drugs. It also prevents the hydrolysis of the drug molecule in the gastrointestinal tract and thus increases the bioavailability of the drug. The present review discusses the overview of other drug delivery routes, challenges with conventional drug delivery systems, pharmaceutical applications of some biopolymers used in buccal drug delivery systems, that are published recently, currently in use, or used over the past decade.

In vivo study of hypericin-loaded poloxamer-based mucoadhesive in situ gelling liquid crystalline precursor system in a mice model of vulvovaginal candidiasis

The present study reports the performance of the pigment hypericin (HYP)-loaded poloxamer-based mucoadhesive in situ gelling liquid crystalline precursor system (LCPS) for the treatment of vulvovaginal candidiasis (VVC) in mice. LCPS composed of 40% of ethoxylated and propoxylated cetyl alcohol, 30% of oleic acid and cholesterol (7:1), 30% of a dispersion of 16% poloxamer 407 and 0.05% of HYP (HYP-LCPS) was prepared and characterized by polarized light microscopy (PLM), small-angle X-ray scattering (SAXS) and ex vivo permeation and retention studies across vaginal porcine mucosa were performed. In addition, the antifungal properties of the HYP-LCPS were evaluated in a murine in vivo model; for this, infected C57BL female mice groups were treated with both HYP in solution and HYP-LCPS, and after 6 days colony forming unit (CFU)/ml count was performed. PLM and SAXS confirmed that HYP-LCPS is a microemulsion situated in boundary transition region confirming its action as an LCPS. When in contact with simulated vaginal fluid, HYP-LCPS became rigid and exhibited maltase crosses and bragg peaks characteristics of lamellar phase. Ex vivo permeation and retention studies showed that HYP-LCPS provides a localized treatment on the superficial layers of porcine vaginal mucosa. HYP-LCPS induced a significant reduction in the number of CFU/ml in the mice; thus this formulation indicated it is as effective as a commercial dosage form. It was concluded that LCPS maintains the biological activity of HYP and provides an adequate drug delivery system for this lipophilic molecule at the vaginal mucosa, being a promising option in cases of VVC.

Liquid Crystalline Phases for Enhancement of Oral Bioavailability

Liquid crystalline phases (LCPs) are generated upon lipolysis of ingested lipids in the gastrointestinal tract. The breaking off and subsequent evolution of LCPs produce more advanced vesicular and micellar structures which facilitate oral absorption of lipids, as well as co-loaded drug entities. Owing to sustained or controlled drug release, bioadhesiveness, and capability of loading drugs of different properties, LCPs are promising vehicles to implement for enhancement of oral bioavailability. This review aims to provide an overview on the classification, preparation and characterization, in vivo generation and transformation, absorption mechanisms, and encouraging applications of LCPs in enhancement of oral bioavailability. In addition, we comment on the merits of LCPs as oral drug delivery carriers, as well as solutions to industrialization utilizing liquid crystalline precursor and preconcentrate formulations.

Development of a Liquid Crystal Formulation that Can Penetrate the Stratum Corneum for Intradermal Delivery of Small Interfering RNA

Topical delivery of small interfering RNA (siRNA) can be an attractive method for the treatment of skin diseases and improving the quality of life of patients. However, it is difficult for siRNA to pass through the two major barriers of the skin: the stratum corneum (SC) and tight junctions. We have previously reported that atopic dermatitis of skin without the SC can be efficiently treated by the intradermal administration of trans-activator of transcription (Tat) peptide and AT1002 (tight junction opening peptide). However, novel drug delivery systems are needed for effective SC penetration. Therefore, in the present study, we aimed to develop a lyotropic liquid crystalline (LC) system containing Tat and AT1002 for effective siRNA penetration through the SC. An LC formulation was prepared using selachyl alcohol and purified water, and its skin penetration ability was evaluated. No fluorescence was observed in mouse skin treated with a siRNA solution, as there was no intradermal localization of siRNA from naked siRNA. However, intradermal delivery of siRNA was remarkable and extensive with the LC formulation containing both Tat and AT1002. Semiquantitative analysis by brightness measurement revealed that the LC formulation containing both Tat and AT1002 had significantly enhanced intact skin permeability than other formulations. These results show that the functional peptides in the LC formulation increased SC penetration and intradermal delivery in the healthy skin. Therefore, this novel LC system may be useful in the treatment of various skin diseases.

Smart phase transformation system based on lyotropic liquid crystalline@hard capsules for sustained release of hydrophilic and hydrophobic drugs

Smart phase transformation systems@hard capsule (SPTS@hard capsule) based on lyotropic liquid crystalline (LLC) were developed for oral sustained release in this study. Doxycycline hydrochloride (DOXY) and meloxicam (MLX) were used as hydrophilic and hydrophobic model drug, respectively. Two systems were added with different additives, that is, gelucire 39/01, PEG 1000 and Tween 80 to adjust their melting point and release profiles. The phase transformation of these systems could be triggered by water as well as temperature. They could spontaneously transform into cubic phase or hexagonal phase when coming across with water, to achieve the 24 h sustained release profile. In addition, the obtained systems could switch between semisolid state and liquid state when temperature changed within room temperature and body temperature, which facilitated the phase transformation in gastrointestinal tract and during their encapsulation into hard capsules. LLC-based SPTS@hard capsule revealed potential for the industrialization of its oral administration on account of its drugs accommodation with different solubility, controllable release profile and simple preparation process.

Lyotropic Liquid Crystal-Based Membranes for Water Remediation: Fabrication, Characterization and Performance Evaluation

In water remediation, biomimetic membranes are gaining much attention due to their selectivity, dynamic stability, nontoxicity, and biocompatibility. Lyotropic liquid crystals (LLCs) are self-organizing networks that can conform to an array of geometries with high pore densities. As such, LLCs are excellent membrane materials for water applications because they are water insoluble and are manipulated to conform to an array of morphologies that provide natural water channels that are readily tunable in size. They have the ability to create uniform pores, between the range of 1 and 5 nm, with large surface areas. Thus, this work focuses on the design, fabrication, and characterization of LLC-modified Janus-type membranes for forward osmosis applications. Physical characterization of the membranes was performed using scanning electron microscopy (SEM), and the results show an open-pore radius and the presence of both finger- and sponge-like pores depending on membrane preparation. The contact angle assessment indicates that as the membranes are further modified with other polymers (e.g., PAN), higher hydrophilicity and surface energy are achieved. Moreover, the Brunauer-Emmett-Teller (BET) analysis showed a significant variation in the pore distribution between membranes. Functionalized membranes presented satisfactory water flux and superior salt rejection compared to nonfunctionalized membranes. SupPACMoDS membranes are 83% more efficient at preventing salt back flux than the nonmodified version. This is credited to the thickness and pore structure provided by the PAN support layer in the membrane.