Antifungal, optical, and mechanical properties of polymethylmethacrylate material incorporated with silanized zinc oxide nanoparticles

Enhancing 3D-printed denture base resins: A review of material innovations

The limited physical and mechanical properties of polymethyl methacrylate (PMMA), the current gold standard, necessitates exploring improved denture base materials. While three-dimensional (3D) printing offers accuracy, efficiency, and patient comfort advantages, achieving superior mechanics in 3D-printed denture resins remains challenging despite good biocompatibility and esthetics. This review investigates the potential of innovative materials to address the limitations of 3D-printed denture base materials. Thus, this article is organized to provide a comprehensive overview of recent efforts to enhance 3D-printed denture base materials, highlighting advancements. It critically examines the impact of incorporating various nanoparticles (zirconia, titania, etc.) on these materials' physical and mechanical properties. Additionally, it delves into recent strategies for nanofiller surface treatment and biocompatibility evaluation and explores potential future directions for polymeric composites in denture applications. The review finds that adding nanoparticles significantly improves performance compared to unmodified resins, and properties can be extensively enhanced through specific modifications, particularly silanized nanoparticles. Optimizing 3D-printed denture acrylics requires a multifaceted approach, with future research prioritizing novel nanomaterials and surface modification techniques for a novel generation of superior performance, esthetically pleasing, and long-lasting dentures.

Mapping the research landscape of nanoparticles and their use in denture base resins: a bibliometric analysis

BACKGROUND

Nanoparticles are increasingly used in dentistry for various applications, including enhancing the mechanical properties of denture base resins. This study aimed to comprehensively review and analyze the research landscape of nanoparticles and their effect on the flexural strength of denture base resins to identify key research areas and trends and to highlight the importance of collaboration between authors and institutions.

METHODS

A Bibliometric Analysis was conducted using the Keywords "Nanoparticle*" AND "Denture*" OR "CAD/CAM." The literature search from the WOS database was restricted to the publication years 2011 to 2022.

RESULTS

Key findings encompass an increase in research publications but a decline in citations. Saudi Arabia, China, and Iraq led this research, with specific institutions excelling. Notable journals with high impact factors were identified. Authorship patterns show variations in citation impact. Additionally, keyword analysis revealed that current research trends offer insights into influential authors and their networks.

CONCLUSIONS

The analysis of nanoparticles and denture base resins reveals a dynamic and evolving landscape that emphasizes the importance of collaboration, staying current with research trends, and conducting high-quality research in this ever-evolving domain.

The effects of antimicrobial photocatalytic nanoparticles on the flexural strength of orthodontic acrylic resins: A systematic review and meta-analysis

BACKGROUND/PURPOSE

Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they should not imperil its mechanical properties. This systematic review was done to evaluate the effect of various photocatalytic nanoparticles on the flexural strength (FS) of acrylic resins.

MATERIALS AND METHODS

We systematically searched the PubMed/Medline, Cochrane Library, and Scopus databases from January 2018 to October 2023. The review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the quality of the studies was evaluated using the QUIN tool, which is specifically designed to assess the risk of bias in vitro studies.

RESULTS

Following screening of 1016 initial records, 23 studies were deemed eligible for inclusion. The addition of photocatalytic nanoparticles, such as emodin (Emo), curcumin (Cur), Cur nisin (CurNis), zeolite/zinc oxide (Zeo/ZnO), and Ulva lactuca (U. lactuca), to acrylic resins resulted in a reduction in FS, with the extent of reduction dependent on the nanoparticle concentration. Specifically, the addition of Emo (≥0.5 %), Cur (≥0.5 %), CurNis (≥5 %), Zeo/ZnO (≥2), and U. lactuca (≥1 %) to acrylic resins significantly decreased FS. Conversely, the inclusion of ZnO and titanium dioxide (TiO2) in acrylic resins improved FS, but higher concentrations (≥5 % for TiO2) had a limited positive effect.

CONCLUSION

Our study supports the use of low concentrations of photocatalytic nanoparticles, such as ZnO (≤2 %), TiO2 (≤3 %), Emo (≤0.5 %), Cur (≤0.5 %), CurNis (≤5 %), and U. lactuca (≤1 %), in orthodontic acrylic resins without compromising FS.

Impact of multiscale surface topography characteristics on Candida albicans biofilm formation: From cell repellence to fungicidal activity

While there has been significant research conducted on bacterial colonization on implant materials, with a focus on developing surface modifications to prevent the formation of bacterial biofilms, the study of Candida albicans biofilms on implantable materials is still in its infancy, despite its growing relevance in implant-associated infections. C. albicans fungal infections represent a significant clinical concern due to their severity and associated high fatality rate. Pathogenic yeasts account for an increasing proportion of implant-associated infections, since Candida spp. readily form biofilms on medical and dental device surfaces. In addition, these biofilms are highly antifungal-resistant, making it crucial to explore alternative solutions for the prevention of Candida implant-associated infections. One promising approach is to modify the surface properties of the implant, such as the wettability and topography of these substrata, to prevent the initial Candida attachment to the surface. This review summarizes recent research on the effects of surface wettability, roughness, and architecture on Candida spp. attachment to implantable materials. The nanofabrication of material surfaces are highlighted as a potential method for the prevention of Candida spp. attachment and biofilm formation on medical implant materials. Understanding the mechanisms by which Candida spp. attach to surfaces will allow such surfaces to be designed such that the incidence and severity of Candida infections in patients can be significantly reduced. Most importantly, this approach could also substantially reduce the need to use antifungals for the prevention and treatment of these infections, thereby playing a crucial role in minimizing the possibility contributing to instances of antimicrobial resistance. STATEMENT OF SIGNIFICANCE: In this review we provide a systematic analysis of the role that surface characteristics, such as wettability, roughness, topography and architecture, play on the extent of C. albicans cells attachment that will occur on biomaterial surfaces. We show that exploiting bioinspired surfaces could significantly contribute to the prevention of antimicrobial resistance to antifungal and chemical-based preventive measures. By reducing the attachment and growth of C. albicans cells using surface structure approaches, we can decrease the need for antifungals, which are conventionally used to treat such infections.

Evaluating the Translucency, Surface Roughness, and Cytotoxicity of a PMMA Acrylic Denture Base Reinforced with Bioactive Glasses

The colonisation of the surface of removable acrylic dentures by various types of microorganisms can lead to the development of various diseases. Therefore, the creation of a bioactive material is highly desirable. This study aimed to develop a denture base material designed to release bioactive ions into the oral environment during use. Four types of bioactive glasses (BAG)-S53P4, Biomin F, 45S5, and Biomin C-were incorporated into the PMMA acrylic resin, with each type constituting 20 wt.% (10 wt.% non-silanised and 10% silanised) of the mixture, while PMMA acrylic resin served as the control group. The specimens were subsequently immersed in distilled water, and pH measurements of the aqueous solutions were taken every seven days for a total of 38 days. Additionally, surface roughness and translucency measurements were recorded both after preparation and following seven days of immersion in distilled water. The cytotoxicity of these materials on human fibroblast cells was evaluated after 24 and 48 h using Direct Contact and MTT assays. Ultimately, the elemental composition of the specimens was determined through energy-dispersive X-ray (EDX) spectroscopy. In general, the pH levels of water solutions containing BAG-containing acrylics gradually increased over the storage period, reaching peak values after 10 days. Notably, S53P4 glass exhibited the most significant increase, with pH levels rising from 5.5 to 7.54. Surface roughness exhibited minimal changes upon immersion in distilled water, while a slight decrease in material translucency was observed, except for Biomin C. However, significant differences in surface roughness and translucency were observed among some of the BAG-embedded specimens under both dry and wet conditions. The composition of elements declared by the glass manufacturer was confirmed by EDX analysis. Importantly, cytotoxicity analysis revealed that specimens containing BAGs, when released into the environment, did not adversely affect the growth of human gingival fibroblast cells after 48 h of exposure. This suggests that PMMA acrylics fabricated with BAGs have the potential to release ions into the environment and can be considered biocompatible materials. Further clinical trials are warranted to explore the practical applications of these materials as denture base materials.

The effect of zinc oxide (ZnO) nanoparticle concentration on the adhesion of mucin and Streptococcus mutans to heat-cured acrylic resin

Incorporating zinc oxide (ZnO) nanoparticles as antibacterial fillers in heat-cured acrylic resin could decrease mucin and Streptococcus mutans (S. mutans) adhesion, reducing the incidence of dental caries in the baseplates of orthodontic patients. Here, ZnO nanoparticles were modified using 3-(trimethoxysilyl)propyl methacrylate with various concentrations, added to acrylic resin powder, homogenized, mixed with acrylic resin liquid, and processed. The composite systems interfered well with mucin and S. mutans adhesion. The lowest mean of the amount of mucin adhered was on heat-cured acrylic resin with 7.5% ZnO nanoparticles, with a standard deviation of 18.07±0.80 mg/mL. The ZnO nanoparticles with a concentration of 7.5% showed an 87.09±0.88% S. mutans adhesion in control groups with no additives. These composite systems were proven to have better physicochemical characteristics and antibacterial abilities. Combining ZnO nanoparticles with heat-cured acrylic resin has great potential for self-cleaning baseplates of orthodontic patients in the future.

Influence of inorganic nanoparticles on dental materials' mechanical properties. A narrative review

Inorganic nanoparticles have been widely incorporated in conventional dental materials to help in improving their properties. The literature has shown that incorporating nanoparticles in dental materials in different specialties could have a positive effect on reinforcing the mechanical properties of those materials; however, there was no consensus on the effectiveness of using nanoparticles in enhancing the mechanical properties of dental materials, due to the variety of the properties of nanoparticles itself and their effect on the mechanical properties. This article attempted to analytically review all the studies that assessed the effect of different types of inorganic nanoparticles on the most commonly used dental materials in dental specialties such as polymethyl methacrylate, glass ionomer cement, resin composite, resin adhesive, orthodontic adhesive, and endodontic sealer. The results had shown that those inorganic nanoparticles demonstrated positive potential in improving those mechanical properties in most of the dental materials studied. That potential was attributed to the ultra-small sizes and unique physical and chemical qualities that those inorganic nanoparticles possess, together with the significant surface area to volume ratio. It was concluded from this comprehensive analysis that while a definitive recommendation cannot be provided due to the variety of nanoparticle types, shapes, and incorporated dental material, the consensus suggests using nanoparticles in low concentrations less than 1% by weight along with a silane coupling agent to minimize agglomeration issues and benefit from their properties.

Overview of incorporation of inorganic antimicrobial materials in denture base resin: A scoping review

STATEMENT OF PROBLEM

Dental hygiene for institutionalized patients and recurring Candida-associated denture stomatitis remain problematic because of a patient's limited dexterity or inability to eliminate Candida from denture surfaces. Although there has been extensive research into antimicrobial modification of denture base resins with inorganic materials, scoping reviews of the literature to identify knowledge gaps or efficacy of inorganic antimicrobial materials in denture base resins are lacking.

PURPOSE

The purpose of this scoping review was to provide a synopsis of the efficacy of the major classes of inorganic antimicrobial materials currently incorporated into denture base resins.

MATERIAL AND METHODS

The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews was applied. Four electronic databases, including Embase, PubMed, Web of Science, and Google Scholar, were accessed for articles in the English language, up to February 2019, without restrictions on the date of publication.

RESULTS

From the 53 articles selected, 25 distinguishable inorganic materials were found and divided into 3 subgroups. Forty-three articles evaluated nanomaterials, where mostly silver ion nanoparticles and/or titanium dioxide nanoparticles were incorporated into denture base resins. Fourteen articles examined antimicrobial drugs and medications, including azole group medications, amphotericin-B, Bactekiller, chlorhexidine, Novaron, and Zeomic. Two articles classified as others explored hydroxyapatite- and fiber-incorporated denture base resins.

CONCLUSIONS

Although nanotechnology and antimicrobial medications or drugs have been successfully used to reduce Candida-associated denture stomatitis, long-term solutions are still lacking, and their disadvantages continue to outweigh their advantages.

Understanding the Mechanical, Surface, and Color Behavior of Oral Bioactive Prosthetic Polymers under Biodegradation Processes

Changes in the properties of resin-based polymers exposed to the oral environment can emerge when chlorhexidine (CHX) is incorporated to develop bioactive systems for treating denture stomatitis. Three reline resins loaded with CHX were prepared: 2.5 wt% in Kooliner (K), 5 wt% in Ufi Gel Hard (UFI), and Probase Cold (PC). A total of 60 specimens were submitted to physical aging (1000 cycles of thermal fluctuations, 5-55 °C) or chemical aging (28 days of pH fluctuations in artificial saliva, 6 h at pH = 3, 18 h at pH = 7). Knoop microhardness (30 s, 98 mN), 3-point flexural strength (5 mm/min), and surface energy were tested. Color changes (ΔE) were determined using the CIELab system. Data were submitted to non-parametric tests (α = 0.05). After aging, bioactive K and UFI specimens were not different from the controls (resins without CHX) in mechanical and surface properties. Thermally aged CHX-loaded PC specimens showed decreased microhardness and flexural strength but not under adequate levels for function. The color change was observed in all CHX-loaded specimens that underwent chemical aging. The long-term use of CHX bioactive systems based on reline resins generally does not impair removable dentures' proper mechanical and aesthetic functions.

Effects of combination of Cryptococcus gattii and IFN-γ, IL-4 or IL-27 on human bronchial epithelial cells

BACKGROUND

Airway epithelial cells are crucial for the establishment of cryptococcosis. In experimental cryptococcosis, the Th2 immune response is associated with host susceptibility, while Th1 cells are associated with protection. The absence of IL-27 receptor alpha in mice favor the increase Cryptococcus neoformans burden in the lung. Here, we evaluated the effects of the combination of IL-4, IFN-γ or IL-27 with C. gattii on human bronchial epithelial cells (BEAS-2B).

METHODS

BEAS-2B were stimulated with IL-4, IFN-γ or IL-27 (100 ng/mL) and/or live yeast forms of C. gattii (multiplicities of infection (MOI) of 1-100) and vice-versa, as well as with heat-killed cells of C. gattii for 24 h.

RESULTS

None of the C. gattii MOIs had cytotoxic effects on BEAS-2B when compared to control. The cells stimulated by cytokines (IL-4, IFN-γ or IL-27) followed by live yeast forms of C. gattii (MOI of 100) infection and vice-versa demonstrated a reduction in IL-6, IL-8 and/or CCL2 production and activation of STAT6 (induced by IL-4) and STAT1 (induced by IL-27 or IFN-γ) when compared to cells stimulated with C. gattii, IL-4, IFN-γ or IL-27. In the combination of cytokines and heat-killed cells of C. gattii, no inhibition of these inflammatory parameters was observed. The growth of C. gattii was increased while the phagocytosis of live yeast forms of C. gattii in the BEAS-2B were reduced in the presence of IL-4, IFN-γ or IL-27. Conclusion The association of live yeast forms, but not heat-killed yeast forms, of C. gattii with IL-4, IFN-γ or IL-27 induced an anti-inflammatory effect.

Prospects on Tuning Bioactive and Antimicrobial Denture Base Resin Materials: A Narrative Review

Denture base resin (DBR) materials are used in dentistry in constructing removable dentures and implant-supported prostheses. A plethora of evidence has demonstrated that DBR materials are associated with a high risk of denture stomatitis, a clinical complication where the soft oral tissues underneath the resin-based material are inflamed. The prevalence of denture stomatitis among denture wearers is high worldwide. Plaque accumulation and the infiltration of oral microbes into DBRs are among the main risk factors for denture stomatitis. The attachment of fungal species, mainly Candida albicans, to DBRs can irritate the underneath soft tissues, leading to the onset of the disease. As a result, several attempts were achieved to functionalize antimicrobial compounds and particles into DBRs to prevent microbial attachment. This review article explored the advanced approaches in designing bioactive and antimicrobial DBR materials. It was reported that using monomer mixtures, quaternary ammonium compounds (QACs), and organic and inorganic particles can suppress the growth of denture stomatitis-related pathogens. This paper also highlighted the importance of characterizing bioactive DBRs to be mechanically and physically sustainable. Future directions may implement a clinical translational model to attempt these materials inside the oral cavity.

Color Stability of Zinc Oxide Poly(methyl methacrylate) Nanocomposite-A New Biomaterial for Denture Bases

(1) Background: The purpose of this in vitro study was to evaluate the color change and stability of a zinc oxide nanoparticle-poly(methyl methacrylate) (ZnO NP-PMMA) nanocomposite for denture base material after immersion in different dietary and cleaning agent solutions. (2) Methods: One hundred samples were prepared and divided into four equinumerous groups depending on the weight content of ZnO NPs. The color coordinates (CIE L*a*b*) were measured using a digital colorimeter, ColorReader (Datacolor AG Europe, Rotkreuz, Switzerland), before and after immersion of the specimens in five different solutions (distilled water, coffee, red wine, black tea, denture cleaning tablet solution) for 6 months. The color changes (ΔE) were calculated using Euclidean distance and analyzed by the Shapiro-Wilk test and the ANOVA/Kruskal-Wallis multiple comparison and adequate post hoc tests. (3) Results: All tested materials showed significant color changes after their exposure to all solutions. Color changes were greatest in the case of red wine and progressed with the duration of the study. (4) Conclusions: The modification of PMMA with ZnO nanoparticles is acceptable in aesthetic terms in 2.5% and 5% weight content; however, color changes are more noticeable with higher nanoparticle content and must be discussed with the patient prior to possible use.

Effects of incorporation of nanoparticles into dental acrylic resins on antimicrobial and physico-mechanical properties: A meta-analysis of in vitro studies

Background

A meta-analysis study was conducted to determine whether the incorporation of nanoparticles into the dental acrylic resins influence the physico-mechanical properties and whether there are the appropriate nanoparticles exhibiting excellent antimicrobial activity against cariogenic bacteria along with acceptable physico-mechanical properties.

Methods

We systematically searched the various databases up to December 2021. The review was performed based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and the Consolidated Standards of Reporting Trials (CONSORT) guidelines. A meta-analysis of physico-mechanical properties was performed by a random-effects model at a 95% confidence interval and the antimicrobial effects were analyzed descriptively.

Results

27 studies were included for the final analysis. There was no statistically significant difference in flexural strength (0.553, [95% confidence interval (CI) 0.501-0.604]), microhardness (0.509, [95% CI 0.278-0.736]), surface roughness (0.753, [95% CI 0.315-0.953]), impact strength (0.90, [95% CI 0.188-0.997]), and elastic modulus (0.848, [95% CI 0.514-0.967]), with nanoparticles addition compared with the control group. Forest plots were not generated for the thermal conductivity, tensile strength, and translucency because of the lack of comparison. Although the articles showed high heterogeneity without the high risk of bias, the finding showed the nanoparticles at low concentrations into dental acrylic resins could improve the antimicrobial activities without adverse effects on their physico-mechanical properties.

Conclusion

Adding the low concentration of nanoparticles such as 0.5% Ag, ≤0.25% TiO₂, and ≤0.25% SiO₂ as the most abundant antimicrobial nanoparticles do not influence their physico-mechanical properties and can be effective in the elimination of cariogenic pathogens.

Photocatalytic effect-assisted antimicrobial activities of acrylic resin incorporating zinc oxide nanoflakes

To overcome the deficiency of the antimicrobial effect of polymer, zinc oxide nanoparticles have been widely utilized as advanced nanofillers due to their antimicrobial and photocatalytic activity. However, the underlying antimicrobial mechanism has not been fully understood apart from topological and physical characteristics. In this study, we prepared zinc oxide nanoparticles-based acrylic resin to explore its antimicrobial mechanism under controlled mechanophysical conditions by using silane-treated zinc oxide nanoflakes (S-ZnNFs). S-ZnNFs incorporated acrylic resin (poly(methyl methacrylate), PMMA) composites up to 2 wt% were selected based on comparable mechanophysical properties (e.g., roughness, wettability, strength and hardness), possibly affecting antimicrobial properties beyond the zinc oxide nanoparticle effect, to bare PMMA. Antimicrobial adhesion results were still observed in 2 wt% S-ZnNFs incorporated PMMA using Candida albicans (C. albicans), one of the fungal infection species. In order to confirm the antimicrobial effects by photocatalysis, we pre-exposed the UV light on 2 wt% S-ZnNF composites before cell seeding, revealing synergetic antimicrobial effect via additional reactive oxygen species (ROS) generation to C. albicans over zinc oxide nanoparticle-induced one. RNA-seq analysis revealed distinguished cellular responses between zinc oxide nanoparticles and UV-mediated photocatalytic effect, but both linked to generation of intracellular ROS. Thus, the above data suggest that induction of high intracellular ROS of C. albicans was the main antimicrobial mechanism under controlled mechanophysical parameters and synergetic ROS accumulation can be induced by photocatalysis, recapitulating a promising use of a S-ZnNFs or possibly zinc oxide nanoparticles as intracellular-ROS-generating antimicrobial nanofillers in acrylic composite for biomedical applications.

How Effective Are Antimicrobial Agents on Preventing the Adhesion of Candida albicans to Denture Base Acrylic Resin Materials? A Systematic Review

Denture stomatitis is a common oral infection caused by Candid albicans. It occurs under removable dentures due to several causative and contributing factors. If not treated, it can lead to fatal systemic candida infections. Different materials and techniques have been used to treat denture stomatitis; however, no single treatment has succeeded. The purpose of this study was to review novel techniques for incorporating antimicrobial and protein repellent agents into denture acrylic resin materials and their effect on the adhesion of Candida albicans to denture base acrylic resin materials to prevent and/or treat denture stomatitis. A systematic review was conducted in which an electronic search was undertaken using different databases and relevant keywords. The literature search revealed numerous studies describing different antifungal materials incorporated into different denture acrylic resin materials. The investigated materials showed significant antimicrobial activity with slight or no effect on the physical and mechanical properties; however, the optical properties were particularly affected with higher concentrations. The incorporation of antimicrobial agents to reduce or prevent Candida albicans biofilm formation on acrylic resin proved to be very effective, and this effect was found to be proportional to the percentage of the material used. The latter should be considered carefully not to alter the physical, mechanical or optical characteristics of the denture base material.

Cryptococcus neoformans in Association with Dermatophagoides pteronyssinus has Pro- (IL-6/STAT3 Overproduction) and Anti-inflammatory (CCL2/ERK1/2 Downregulation) Effects on Human Bronchial Epithelial Cells

Cryptococcosis (caused, for example, by Cryptococcus neoformans) and allergic asthma (caused, for example, by Dermatophagoides pteronyssinus) target the respiratory tract (the lung and bronchial epithelium). C. neoformans and D. pteronyssinus can coexist in the same indoor environment, and exposure to both can cause alterations in the local airway inflammatory milieu and exacerbation of airway inflammatory diseases. Here, we evaluated the effects of the association between C. neoformans and D. pteronyssinus in the modulation of airway inflammatory responses in an in vitro experimental model using human bronchial epithelial cells. BEAS-2B cells were cultivated and stimulated with D. pteronyssinus (10 μg/mL) and/or C. neoformans (MOI 100) for 24 h. No cytotoxic effect was observed in cells stimulated by C. neoformans and/or D. pteronyssinus. The production of IL-8, IL-6, and/or CCL2, but not IL-10, as well as the activation of NF-kB, STAT3, STAT6, and/or ERK1/2 were increased in cells stimulated by C. neoformans or D. pteronyssinus compared to controls. C. neoformans in association with D. pteronyssinus inhibited the CCL2‑ERK1/2 signaling pathway in cells treated with both pathogens compared to cells stimulated by D. pteronyssinus alone. In addition, their association induced an additive effect on the IL-6/STAT3 signaling pathway in cells compared to cells stimulated with D. pteronyssinus or C. neoformans only. D. pteronyssinus increased the internalization and growth of C. neoformans in BEAS-2B cells. D. pteronyssinus in association with C. neoformans promoted pro- and anti-inflammatory responses, which can modulate cryptococcal infection and asthmaticus status.

Effect of Low Nanodiamond Concentrations and Polymerization Techniques on Physical Properties and Antifungal Activities of Denture Base Resin

Background: Denture base resin has some drawbacks. This study investigated the impact of nanodiamonds (ND) and autoclave polymerization on the surface characteristics, translucency, and Candida albicans adherence in polymethyl methacrylate (PMMA) denture base resin after thermocycling. Methods: Heat-polymerized PMMA discs (15 × 2 mm) with a total sample size n = 160 were studied. Specimens were categorized into two main groups (N = 80): conventional water-bath-polymerized PMMA (CP/PMMA) and autoclave-polymerized PMMA (AP/PMMA). Each group was subdivided according to the ND concentration into four groups (n = 20): unmodified PMMA as a control, and 0.1%, 0.25%, and 0.5% ND–PMMA. Scanning electron microscopy (SEM) was used to inspect the morphology of the ND and the ND–PMMA mixtures before heat polymerization. The specimens were exposed to thermal cycling (5000 cycles at 5 and 55 °C), then surface roughness was measured with a non-contact optical interferometric profilometer, contact angle with an automated goniometer, and translucency using a spectrophotometer. Colony-forming units (CFU) were used to determine the adherence of Candida albicans cells to the specimens. ANOVA and Tukey post hoc tests for pairwise comparison were utilized for the statistical analysis (α = 0.05). Results: Surface roughness was significantly reduced with ND addition to CP/PMMA (p ˂ 0.001), while the reduction was not statistically significant in AP/PMMA (p = 0.831). The addition of ND significantly reduced the contact angle, translucency, and Candida albicans count of CP/PMMA and AP/PMMA (p ˂ 0.001). The incorporation of ND in conjunction with autoclave polymerization of PMMA showed significant reduction in all tested properties (surface roughness, contact angle and Candida albicans adherence) except translucency (p = 0.726). Conclusions: ND addition to PMMA and autoclave polymerization improved the surface properties with respect to antifungal activities, while the translucency was adversely affected.

Nanoparticles in Prosthetic Materials: A Literature Review

The commonly used prosthodontic materials are resins, ceramics, metals and silicones. A comprehensive review of literature was completed about the incorporation of nanomaterials in prosthetic dentistry using PubMed and Google Scholar databases. This was supplemented with a manual search of selected journals. English language articles in peer- reviewed journals were selected. Current literature reveals that incorporation of nanomaterials has significantly improved the properties of the prosthetic materials within the clinically acceptable ranges. There appears to be a need for a standardization for these in vitro studies carried out to evaluate their physical, mechanical and antimicrobial properties

Current approaches for the exploration of antimicrobial activities of nanoparticles

Infectious diseases of bacterial and viral origins contribute to substantial mortality worldwide. Collaborative efforts have been underway between academia and the industry to develop technologies for a more effective treatment for such diseases. Due to their utility in various industrial applications, nanoparticles (NPs) offer promising potential as antimicrobial agents against bacterial and viral infections. NPs have been established to possess potent antimicrobial activities against various types of pathogens due to their unique characteristics and cell-damaging ability through several mechanisms. The recently accepted antimicrobial mechanisms possessed by NPs include metal ion release, oxidative stress induction, and non-oxidative mechanisms. Another merit of NPs lies in the low likelihood of the development of microbial tolerance towards NPs, given the multiple simultaneous mechanisms of action against the pathogens targeting numerous gene mutations in these pathogens. Moreover, NPs provide a fascinating opportunity to curb microbial growth before infections: this outstanding feature has led to their utilization as active antimicrobial agents in different industrial applications, e.g. the coating of medical devices, incorporation in food packaging, promoting wound healing and encapsulation with other potential materials for wastewater treatment. This review discusses the progress and achievements in the antimicrobial applications of NPs, factors contributing to their actions, mechanisms underlying their efficiency, and risks of their applications, including the antimicrobial action of metal nanoclusters (NCs). The review concludes with a discussion of the restrictions on present studies and future prospects of nanotechnology-based NPs development.

Anti-inflammatory actions of aspirin-triggered resolvin D1 (AT-RvD1) in bronchial epithelial cells infected with Cryptococcus neoformans

BACKGROUND

The interaction of Cryptococcus neoformans with airway epithelial cells is crucial for the establishment of cryptococcosis. Aspirin-triggered-resolvin D1 (AT-RvD1) is a lipid mediator produced during the resolution of inflammation and demonstrates anti-inflammatory and pro-resolution effects in several inflammatory experimental models including in the airways.

METHOD

Here, we evaluated the effects of AT-RvD1 (1, 10 or 100 nM) on human bronchial epithelial cells (BEAS-2B) stimulated with C. neoformans (1, 10 or 100 multiplicities of infection; MOI).

RESULTS

After 24 h, C. neoformans (all MOI) demonstrated no cytotoxic effects and increased IL-8 production on BEAS-2B cells when compared to controls. In addition, C. neoformans (MOI 100) increased the concentration of IL-6, but not of IL-10. AT-RvD1 (100 nM) significantly reduced the concentration of IL-8 and IL-6 and increased IL-10 production in C. neoformans-stimulated BEAS-2B cells. C. neoformans increased the phosphorylation of NF-κB and ERK1/2, and ALX/FPR2 expression. AT-RvD1 reduced the activation of NF-kB without altering the ERK1/2 and ALX/FPR2 expression. The anti-inflammatory effects of AT-RvD1 were dependent on the ALX/FPR2, once its antagonist (BOC2) reversed its anti-inflammatory effects. No alteration on the fungal burden as well as interactions with BEAS-2B cells was observed by AT-RvD1.

CONCLUSION

AT-RvD1 demonstrated significant anti-inflammatory effects in bronchial epithelial cells infected with C. neoformans without affecting the development of C. neoformans infection in the airways.

TRIAL REGISTRATION

Not applicable.

Nanoparticles in Dentistry: A Comprehensive Review

In recent years, nanoparticles (NPs) have been receiving more attention in dentistry. Their advantageous physicochemical and biological properties can improve the diagnosis, prevention, and treatment of numerous oral diseases, including dental caries, periodontal diseases, pulp and periapical lesions, oral candidiasis, denture stomatitis, hyposalivation, and head, neck, and oral cancer. NPs can also enhance the mechanical and microbiological properties of dental prostheses and implants and can be used to improve drug delivery through the oral mucosa. This paper reviewed studies from 2015 to 2020 and summarized the potential applications of different types of NPs in the many fields of dentistry.

Effects of cigarette smoke extract on bronchial epithelial cells stimulated with Cryptococcus neoformans

In the airways, the adhesion of Cryptococcus neoformans with airway epithelial cells is crucial for the establishment of cryptococcosis. Tobacco smoke is considered a risk factor for cryptococcosis. Here, we evaluated the effects of cigarette smoke extract (CSE) on human bronchial epithelial cells (BEAS-2B) stimulated with C. neoformans. Multiplicities of infection (MOIs) of 1-100 of C. neoformans per cell led to increased IL-8 production and no cytotoxic effects when compared to those of controls. C. neoformans (MOI 100) also significantly increased the concentration of IL-6. In cells stimulated with CSE doses (1.0, 2.5 and 5.0%) from one or five cigarettes, increased IL-1β production was observed only in doses from one (1.0%) and five (2.5%) cigarettes when compared to that of controls. However, only 1.0% CSE failed to show cytotoxic effects. In addition, CSE significantly increased the concentration of IL-8. Cells stimulated with both CSE and C. neoformans demonstrated a reduction in IL-6/STAT3 signalling compared to that in cells stimulated by C. neoformans. In addition, a significant increase in IL-10 production was also observed. No alterations in NF-kB or ICAM-1 expression were observed among the groups. The combination of CSE and C. neoformans favoured the increase of fungal numbers and extracellular adhering of C. neoformans on BEAS-2B cells. In addition, the internalization of C. neoformans on BEAS-2B cells was reduced after CSE stimulation. In conclusion, the association of CSE and C. neoformans induced an anti-inflammatory effect in bronchial epithelial cells, which might favour the development of C. neoformans infection in the airways.

Biomaterials for the Prevention of Oral Candidiasis Development

Thousands of microorganisms coexist within the human microbiota. However, certain conditions can predispose the organism to the overgrowth of specific pathogens that further lead to opportunistic infections. One of the most common such imbalances in the normal oral flora is the excessive growth of Candida spp., which produces oral candidiasis. In immunocompromised individuals, this fungal infection can reach the systemic level and become life-threatening. Hence, prompt and efficient treatment must be administered. Traditional antifungal agents, such as polyenes, azoles, and echinocandins, may often result in severe adverse effects, regardless of the administration form. Therefore, novel treatments have to be developed and implemented in clinical practice. In this regard, the present paper focuses on the newest therapeutic options against oral Candida infections, reviewing compounds and biomaterials with inherent antifungal properties, improved materials for dental prostheses and denture adhesives, drug delivery systems, and combined approaches towards developing the optimum treatment.

Translucency of nanoparticle-reinforced PMMA denture base material: An in-vitro comparative study

The aim of this study was to assess the translucency of denture base acrylic resin reinforced with zirconium dioxide (ZrO₂NPs), silicon dioxide (SiO₂NPs), and diamond (DNPs) nanoparticles. A total of 130 heat-polymerized acrylic discs (15×2.5 mm) were fabricated conventionally and divided into control and experimental groups according to nanoparticle type and concentration (0.5, 1, 1.5, and 2.5 wt%). Unmodified acrylic resin specimens served as control. All specimens were thermocycled (5,000 cycles). Translucency was measured using a spectrophotometer. ANOVA and post-hoc Turkeys' test were used for data analysis at α=0.05. The translucency of modified PMMA was significantly lower than control (p<0.05) except 0.5% ZrO₂NPs and SiO₂NPs (p>0.05) which exhibited the highest translucency values among modified groups. As the NPs concentration increased, the translucency decreased and the lowest value was seen with 2.5% DNPs (1.18±0.10). The addition of ZrO₂NPs, SiO₂NPs, and DNPs into denture base resin decreased the translucency.

Surface Characterization, Biocompatibility and Antifungal Efficacy of a Denture-Lining Material Containing Cnidium officinale Extracts

Herein, we investigated the surface characterization and biocompatibility of a denture-lining material containing Cnidium officinale extracts and its antifungal efficacy against Candida albicans. To achieve this, a denture-lining material containing various concentrations of C. officinale extract and a control group without C. officinale extract were prepared. The surface characterization and biocompatibility of the samples were investigated. In addition, the antifungal efficacy of the samples on C. albicans was investigated using spectrophotometric growth and a LIVE/DEAD assay. The results revealed that there was no significant difference between the biocompatibility of the experimental and control groups (p > 0.05). However, there was a significant difference between the antifungal efficiency of the denture material on C. albicans and that of the control group (p < 0.05), which was confirmed by the LIVE/DEAD assay. These results indicate the promising potential of the C. officinale extract-containing denture-lining material as an antifungal dental material.

Effect of zinc oxide nanoparticles incorporated into tissue conditioner on antifungal, physical, and mechanical properties

This study evaluated the antifungal, physical, and mechanical properties of tissue conditioner incorporated with different amounts of zinc oxide nanoparticles (ZnOnps) at different storage times (0, 7, and 14 days). Specimens of 0, 5, 10, 15 wt% ZnOnps, or 15 wt% nystatin incorporated into tissue conditioner were fabricated (control, 5Zn, 10Zn, 15Zn, and Nys). The direct contact test (n=6) was performed to evaluate the antifungal effect against C. albicans suspension. The penetration depth (n=6) and tensile bond strength (n=8) were evaluated following ISO 13139. The 15Zn significantly reduced C. albicans cell number compared with control at all storage times (p<0.001). The penetration depths and tensile bond strengths of the 5Zn, 10Zn, 15Zn, and Nys were not significantly different compared with control at all storage times (p>0.05). In conclusion, the 15Zn provides antifungal effect up to 14 days without adverse effects on penetration depth and tensile bond strength.

Antifungal Efficacy and Physical Properties of Poly(methylmethacrylate) Denture Base Material Reinforced with SiO2 Nanoparticles

PURPOSE

To evaluate the effect of the addition of low concentration of silicon-dioxide nanoparticles (nano-SiO₂ ) to poly(methylmethacrylate) (PMMA) denture base material on Candida albicans adhesion, surface roughness, contact angle, hardness, and translucency.

MATERIALS AND METHODS

A total of 150 acrylic disks were fabricated from heat-polymerized acrylic resin and specimens were divided into 3 groups of 50 per test. They were further subdivided into 5 subgroups (n = 10) according to the concentration of nano-SiO₂ : control (no addition) and four tested groups modified with 0.05, 0.25, 0.5, and 1.0 wt% nano-SiO₂ of acrylic powder. Slide count and direct culture methods were used to measure C. albicans count (CFU/mL). The surface roughness values (R_a ; μm) were determined using a profilometer. The contact angle (^o ) measurement was performed by a goniometer using the sessile drop method. Vickers hardness was used to analyze surface hardness. Translucency was measured using a spectrophotometer. Data analysis was conducted through analysis of variance and Tukey's post hoc tests (α = 0.05).

RESULTS

Compared to the control group, direct culture and slide count methods illustrated a significant decrease in C. albicans count (p ˂ 0.001) with the addition of nano-SiO₂ , and this decrease was correlated with the concentration of nano-SiO₂ . The addition of nano-SiO₂ significantly decreased the contact angle (p ˂ 0.001), whereas hardness and surface roughness significantly increased (p ˂ 0.001). The addition of nano-SiO₂ significantly decreased translucency (p ˂ 0.001), and this decrease was concentration dependent.

CONCLUSION

Addition of low concentration of nano-SiO₂ decreased C. albicans adhesion to PMMA denture base resin. Also, low additions of nano-SiO₂ have positive effects on contact angle and hardness, whereas surface roughness and translucency were adversely affected at high concentrations.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Relationship Between Structure And Antimicrobial Activity Of Zinc Oxide Nanoparticles: An Overview

The inappropriate use of antimicrobials has resulted in the selection of resistant strains. Thus, a great number of studies have focused on the investigation of new antimicrobial agents. The use of zinc oxide nanoparticles (ZnO NPs) to optimise the fight against microbial resistance has been receiving increased attention due to the non-specific activity of inorganic antimicrobial agents. The small particle size and the high surface area of ZnO NPs can enhance antimicrobial activity, causing an improvement in surface reactivity. In addition, surface modifiers covering ZnO NPs can play a role in mediating antimicrobial activity since the surface properties of nanomaterials alter their interactions with cells; this may interfere with the antimicrobial effect of ZnO NPs. The possibility of using surface modifiers with groups toxic to microorganisms can improve the antimicrobial activity of ZnO NPs. Understanding the exact toxicity mechanisms is crucial to elucidating the antimicrobial activity of ZnO NPs in bacteria and fungi. Therefore, this review aims to describe the mechanisms of ZnO NPs toxicity against fungi and bacteria and how the different structural and physical-chemical characteristics of ZnO NPs can interfere in their antimicrobial activity.

Zinc Oxide Nanoparticles Cytotoxicity and Release from Newly Formed PMMA-ZnO Nanocomposites Designed for Denture Bases

The goal of the study was to investigate the level of zinc oxide nanoparticles (ZnO NPs) release from polymethyl methacrylate (PMMA)-ZnO nanocomposites (2.5%, 5%, and 7.5% w/w), as well as from the ZnO NPs layer produced on pure PMMA, and the impact of the achieved final ZnO NPs concentration on cytotoxicity, before the potential use as an alternative material for denture bases. The concentration of ZnO nanoparticles released to the aqueous solution of Zn²⁺ ions was assessed using optical emission spectrometry with inductively coupled plasma (ICP-OES). In the control group (pure PMMA), the released mean for ZnO was 0.074 mg/L and for individual nanocomposites at concentrations of 2.5%, 5%, and 7.5% was 2.281 mg/L, 2.143 mg/L, and 3.512 mg/L, respectively. The median for the ZnO NPs layer produced on PMMA was 4.878 mg/L. In addition, in vitro cytotoxicity of ZnO NPs against the human HeLa cell line was determined through the reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) dye. The cytotoxicity studies demonstrate that ZnO nanoparticles in the concentrations up to 20 mg/L have no adverse effect on HeLa cells. When compared with the released and cytotoxic concentrations of ZnO NPs, it can be expected that ZnO released from dental prostheses to the oral cavity environment will have no cytotoxic effect on host cells.

Antibacterial Activity and Cytocompatibility of Bone Cement Enriched with Antibiotic, Nanosilver, and Nanocopper for Bone Regeneration

Bacterial infections due to bone replacement surgeries require modifications of bone cement with antibacterial components. This study aimed to investigate whether the incorporation of gentamicin or nanometals into bone cement may reduce and to what extent bacterial growth without the loss of overall cytocompatibility and adverse effects in vitro. The bone cement Cemex was used as the base material, modified either with gentamicin sulfate or nanometals: Silver or copper. The inhibition of bacterial adhesion and growth was examined against five different bacterial strains along with integrity of erythrocytes, viability of blood platelets, and dental pulp stem cells. Bone cement modified with nanoAg or nanoCu revealed greater bactericidal effects and prevented the biofilm formation better compared to antibiotic-loaded bone cement. The cement containing nanoAg displayed good cytocompatibility without noticeable hemolysis of erythrocytes or blood platelet disfunction and good viability of dental pulp stem cells (DPSC). On the contrary, the nanoCu cement enhanced hemolysis of erythrocytes, reduced the platelets aggregation, and decreased DPSC viability. Based on these studies, we suggest the modification of bone cement with nanoAg may be a good strategy to provide improved implant fixative for bone regeneration purposes.

Application of Antimicrobial Nanoparticles in Dentistry

Oral cavity incessantly encounters a plethora of microorganisms. Plaque biofilm-a major cause of caries, periodontitis and other dental diseases-is a complex community of bacteria or fungi that causes infection by protecting pathogenic microorganisms from external drug agents and escaping the host defense mechanisms. Antimicrobial nanoparticles are promising because of several advantages such as ultra-small sizes, large surface-area-to-mass ratio and special physical and chemical properties. To better summarize explorations of antimicrobial nanoparticles and provide directions for future studies, we present the following critical review. The keywords "nanoparticle," "anti-infective or antibacterial or antimicrobial" and "dentistry" were retrieved from Pubmed, Scopus, Embase and Web of Science databases in the last five years. A total of 172 articles met the requirements were included and discussed in this review. The results show that superior antibacterial properties of nanoparticle biomaterials bring broad prospects in the oral field. This review presents the development, applications and underneath mechanisms of antibacterial nanoparticles in dentistry including restorative dentistry, endodontics, implantology, orthodontics, dental prostheses and periodontal field.

Mechanical and Physicochemical Properties of Newly Formed ZnO-PMMA Nanocomposites for Denture Bases

AIM

The aim of this study was to investigate the selected properties of zinc oxide- polymethyl methacrylate (ZnO-PMMA) nanocomposites that can influence the microorganism deposition on their surface.

MATERIALS AND METHODS

Non-commercial ZnO-NPs were prepared, characterized and used for the preparation of PMMA nanocomposite. Roughness, absorbability, contact angle and hardness of this new nanomaterial were evaluated. PMMA without ZnO-NPs served as control.

OUTCOMES

Compared to unenriched PMMA, incorporation of ZnO-NPs to 7.5% for PMMA nanocomposite increases the hardness (by 5.92%) and the hydrophilicity. After modification of the material with zinc oxide nanoparticles the roughness parameter did not change. All tested materials showed absorption within the range of 1.82 to 2.03%, which meets the requirements of International Organization for Standardization (ISO) standards for denture base polymers.

CONCLUSIONS

The results showed no significant deterioration in the properties of acrylic resin that could disqualify the nanocomposite for clinical use. Increased hydrophilicity and hardness with absorbability within the normal range can explain the reduced microorganism growth on the denture base, as has been proven in a previous study.