Icariin-loaded electrospun PCL/gelatin sub-microfiber mat for preventing epidural adhesions after laminectomy

Methacrylated Carboxymethyl Chitosan Scaffold Containing Icariin-Loaded Short Fibers for Antibacterial, Hemostasis, and Bone Regeneration

Bone defects typically result in bone nonunion, delayed or nonhealing, and localized dysfunction, and commonly used clinical treatments (i.e., autologous and allogeneic grafts) have limited results. The multifunctional bone tissue engineering scaffold provides a new treatment for the repair of bone defects. Herein, a three-dimensional porous composite scaffold with stable mechanical support, effective antibacterial and hemostasis properties, and the ability to promote the rapid repair of bone defects was synthesized using methacrylated carboxymethyl chitosan and icariin-loaded poly-l-lactide/gelatin short fibers (M-CMCS-SFs). Icariin-loaded SFs in the M-CMCS scaffold resulted in the sustained release of osteogenic agents, which was beneficial for mechanical reinforcement. Both the porous structure and the use of chitosan facilitate the effective absorption of blood and fluid exudates. Moreover, its superior antibacterial properties could prevent the occurrence of inflammation and infection. When cultured with bone mesenchymal stem cells, the composite scaffold showed a promotion in osteogenic differentiation. Taken together, such a multifunctional composite scaffold showed comprehensive performance in antibacterial, hemostasis, and bone regeneration, thus holding promising potential in the repair of bone defects and related medical treatments.

The nano-artificial periosteum made of PCL/MgO/AS-IV enhances MC3T3-E1 cell osteogenic differentiation and promotes bone defect repair via the EphB4/EphrinB2 signaling pathway

Bone regeneration plays a pivotal role in periodontal tissue repair. With advancements in biotechnology materials, the utilization of nanotechnology offers a reliable platform for bone restoration in periodontitis. In this study, we successfully established a long-term bacterial infection model using Porphyromonas gingivalis (P. gingivalis) with MOI = 50. CCK-8 and ROS immunofluorescence results demonstrated that the combined effect of Mg2+ and AS-IV significantly enhanced cell proliferation and effectively suppressed the inflammatory response during bacterial infection. Alkaline phosphatase and alizarin red staining revealed that the synergistic action of Mg2+ and AS-IV notably promoted osteogenic differentiation of MC3T3-E1 cells under P. gingivalis-infected conditions. Considering the properties of these two biomaterials, we fabricated polycaprolactone (PCL) artificial periosteum loaded with MgO and AS-IV using an electrostatic spinning technique. The findings indicated that PCL/MgO/AS-IV artificial periosteum exhibited excellent biocompatibility and hydrophilicity, thereby substantially enhancing cellular adhesion to its surface as well as augmenting cellular value-added rate. Moreover, efficient drug release from the PCL/MgO/AS-IV artificial bone membrane conferred remarkable antimicrobial activity along with in vitro osteogenic potentiality. The in vivo experiments conducted on animals further substantiated the exceptional properties exhibited by PCL/MgO/AS-IV artificial periosteum in bone defect repair. Additionally, it was observed that PCL/MgO/AS-IV artificial periosteum could modulate EphB4-EphrinB2 signaling to enhance osteogenic differentiation under P.gingivalis-infected conditions.This exciting outcome suggests that PCL/MgO/AS-IV artificial periosteum holds great promise as a biomaterial for treating periodontal bone loss.

Promoting osteogenesis and bone regeneration employing icariin-loaded nanoplatforms

There is an increasing demand for innovative strategies that effectively promote osteogenesis and enhance bone regeneration. The critical process of bone regeneration involves the transformation of mesenchymal stromal cells into osteoblasts and the subsequent mineralization of the extracellular matrix, making up the complex mechanism of osteogenesis. Icariin's diverse pharmacological properties, such as anti-inflammatory, anti-oxidant, and osteogenic effects, have attracted considerable attention in biomedical research. Icariin, known for its ability to stimulate bone formation, has been found to encourage the transformation of mesenchymal stromal cells into osteoblasts and improve the subsequent process of mineralization. Several studies have demonstrated the osteogenic effects of icariin, which can be attributed to its hormone-like function. It has been found to induce the expression of BMP-2 and BMP-4 mRNAs in osteoblasts and significantly upregulate Osx at low doses. Additionally, icariin promotes bone formation by stimulating the expression of pre-osteoblastic genes like Osx, RUNX2, and collagen type I. However, icariin needs to be effectively delivered to bone to perform such promising functions.Encapsulating icariin within nanoplatforms holds significant promise for promoting osteogenesis and bone regeneration through a range of intricate biological effects. When encapsulated in nanofibers or nanoparticles, icariin exerts its effects directly at the cellular level. Recalling that inflammation is a critical factor influencing bone regeneration, icariin's anti-inflammatory effects can be harnessed and amplified when encapsulated in nanoplatforms. Also, while cell adhesion and cell migration are pivotal stages of tissue regeneration, icariin-loaded nanoplatforms contribute to these processes by providing a supportive matrix for cellular attachment and movement. This review comprehensively discusses icariin-loaded nanoplatforms used for bone regeneration and osteogenesis, further presenting where the field needs to go before icariin can be used clinically.

Advanced postoperative tissue antiadhesive membranes enabled with electrospun nanofibers

Tissue adhesion is one of the most common postoperative complications, which is frequently accompanied by inflammation, pain, and even dyskinesia, significantly reducing the quality of life of patients. Thus, to prevent the formation of tissue adhesions, various strategies have been explored. Among these methods, placing anti-adhesion membranes over the injured site to separate the wound from surrounding tissues is a simple and prominently favored method. Recently, electrospun nanofibers have been the most frequently investigated antiadhesive membranes due to their tunable porous structure and high porosities. They not only can act as an essential barrier and functional carrier system but also allow for high permeability and nutrient transport, showing great potential for preventing tissue adhesion. Herein, we provide a short review of the most recent applications of electrospun nanofibrous antiadhesive membranes in tendons, the abdominal cavity, dural sac, pericardium, and meninges. Firstly, each section highlights the most representative examples and they are sorted based on the latest progress of related research. Moreover, the design principles, preparation strategies, overall performances, and existing problems are highlighted and evaluated. Finally, the current challenges and several future ways to develop electrospun nanofibrous antiadhesive membranes are proposed. The systematic discussion and proposed directions can shed light on ideas and guide the reasonable design of electrospun nanofibrous membranes, contributing to the development of exceptional tissue anti-adhesive materials in the foreseeable future.

Chitosan-crosslinked polyvinyl alcohol anti-swelling hydrogel designed to prevent abdominal wall adhesion

Abdominal adhesion is a frequent clinical issue with a high incidence rate and consequences following intra-abdominal surgery. Although many anti-adhesion materials have been used in surgical procedures, additional research is still needed to determine which ones have the most robust wet tissue adhesion, the best anti-postoperative adhesion, and the best anti-inflammatory properties. We have developed an excellent tissue adhesion and anti-swelling polyvinyl alcohol-chitosan hydrogel (AS hydrogel). According to in vitro cell testing, AS hydrogel significantly decreased inflammation around cells and exhibited good biocompatibility. Further, we assessed how well AS hydrogel prevented intraperitoneal adhesion using a rabbit model with cecum and abdominal wall injuries. According to the data, AS hydrogel has excellent anti-inflammatory and biodegradability properties compared to the control group. It can also prevent intestinal and abdominal wall injuries from occurring during surgery. Based on these results, hydrogel appears to be a perfect new material to prevent postoperative abdominal wall adhesion.

Herbal active ingredient-loaded poly(ω-pentadecalactone-co-δ-valerolactone)/gelatin nanofibrous membranes

Recently, there has been an accelerating interest in novel biocompatible wound dressings made of nano-sized materials, especially nanofibers. Electrospun nanofibers provide high surface area and mimic the extracellular matrix which enhances biocompatibility. Besides, nanofibrous structures have high active ingredient loading capacity as a result of their high surface-to-volume ratio and porosity. In the present study, curcumin-loaded poly(ω-pentadecalactone-co-δ-valerolactone)/gelatin (PDL-VL/Gel) nanofibrous membranes were fabricated to be used for healing skin wounds. Poly(ω-pentadecalactone-co-δ-valerolactone) copolymer has been enzymatically synthesized in previous studies, thus it improves the originality of the membrane. It was aimed to obtain a synergetic effect and increase the novelty of the work by blending synthetic and natural polymers. Moreover, it was preferred to provide antibacterial activity by the incorporation of a herbal ingredient (curcumin) as a natural alternative to commercial antibiotics. Varied amounts of curcumin (5-25 %, w:v) were electrospun together with PDL-VL/Gel (equal volume ratio) polymer blend (fiber diameters ranged between 554 and 1074 nm) and several characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to examine the curcumin incorporation. Afterwards, in vitro curcumin release studies were carried out and mathematical modeling was applied to release data to clarify the transport mechanism. Curcumin release profiles comprised of an initial burst release in the first hour followed by a sustained release through 24 h. Based on the antibacterial activity test results, 15 % curcumin loading ratio was found to be sufficient for the treatment of skin wounds infected by Gram-negative (E. coli) and Gram-positive (S. aureus and B. subtilis) bacteria. Additionally, nanofibrous membranes did not lead to cytotoxicity, and curcumin content further enhanced the viability of fibroblasts. Thus, the presented antibacterial nanofibrous membrane is suggested to be applied for the treatment of wound infections and accelerating the healing process.

Pharmacotherapies to prevent epidural fibrosis after laminectomy: a systematic review of in vitro and in vivo animal models

BACKGROUND CONTEXT

Excessive production of epidural fibrosis in the nerve root can be a pain source after laminectomy. Pharmacotherapy is a minimally invasive treatment option to attenuate epidural fibrosis by suppressing proliferation and activation of fibroblasts, inflammation, and angiogenesis, and inducing apoptosis.

PURPOSE

We reviewed and tabulated pharmaceuticals with their respective signaling axes implicated in reducing epidural fibrosis. Additionally, we summarized current literature for the feasibility of novel biologics and microRNA to lessen epidural fibrosis.

STUDY DESIGN/SETTING

Systematic Review.

METHODS

According to the PRISMA guidelines, we systematically reviewed the literature in October 2022. The exclusion criteria included duplicates, nonrelevant articles, and insufficient detail of drug mechanism.

RESULTS

We obtained a total of 2,499 articles from PubMed and Embase databases. After screening the articles, 74 articles were finally selected for the systematic review and classified based on the functions of drugs and microRNAs which included inhibition of fibroblast proliferation and activation, pro-apoptosis, anti-inflammation, and antiangiogenesis. In addition, we summarized various pathways to prevent epidural fibrosis.

CONCLUSION

This study allows a comprehensive review of pharmacotherapies to prevent epidural fibrosis during laminectomy.

CLINICAL SIGNIFICANCE

We expect that our review would enable researchers and clinicians to better understand the mechanism of anti-fibrosis drugs for the clinical application of epidural fibrosis therapies.

Electrospun polymer fibers modified with FK506 for the long-term treatment of acute cardiac allograft rejection in a heart transplantation model

FK506, a first-line immunosuppressant, is routinely administered orally and intravenously following heart transplantation. However, frequent administration can result in a substantial psychological burden to patients, resulting in non-adherence to medication. The purpose of our study is to overcome the disadvantages of systemic drug administration by developing a polymer-based delivery system that is tunable and biodegradable and that can release highly hydrophobic FK506 over extended periods to treat or prevent acute cardiac allograft rejection. Using an electrospinning method, long-acting microfibers were prepared, and FK506 appeared to be continuously released for up to 14 days based on the in vitro release profiles. After implanting the microfiber subcutaneously into the abdominals of transplanted rats, it was found that the infiltration of T cells and macrophages and the secretion of interleukin-2 (IL-2) and IL-1β were significantly reduced compared with those of the free FK506 groups. More importantly, the mean survival time (MST) of the PCL-FK506 group was significantly extended in comparison with that of untreated control recipients and free FK506 (MST of untreated control recipients, free FK506, and PCL-FK506 was 8, 26.1, and 37, respectively). In conclusion, we propose that this drug delivery approach would be suitable for developing long-lasting immunomodulatory agents that prolong cardiac graft survival safely and effectively.

Electrospun Nanofibers for Dura Mater Regeneration: A Mini Review on Current Progress

Dural defects are a common problem in neurosurgical procedures and should be repaired to avoid complications such as cerebrospinal fluid leakage, brain swelling, epilepsy, intracranial infection, and so on. Various types of dural substitutes have been prepared and used for the treatment of dural defects. In recent years, electrospun nanofibers have been applied for various biomedical applications, including dural regeneration, due to their interesting properties such as a large surface area to volume ratio, porosity, superior mechanical properties, ease of surface modification, and, most importantly, similarity with the extracellular matrix (ECM). Despite continuous efforts, the development of suitable dura mater substrates has had limited success. This review summarizes the investigation and development of electrospun nanofibers with particular emphasis on dura mater regeneration. The objective of this mini-review article is to give readers a quick overview of the recent advances in electrospinning for dura mater repair.

Pirfenidone-loaded hyaluronic acid methacryloyl hydrogel for preventing epidural adhesions after laminectomy

It is inevitable that scar formation occurs between the spinal dura and surrounding tissues after laminectomy. While extensive epidural fibrosis, which results in limited nerve root activity and severe pain, is the main cause of postoperative failed-back surgery syndrome. Novel biomaterial loading effective drugs based on reasonable design are eagerly needed for the safe and effective prevention of epidural adhesions. We filtrated a suitable dose of pirfenidone (PFD) to load hyaluronic acid methacryloyl (HAMA) hydrogel in vitro. And then, we compare PFD-loaded HAMA hydrogel with only using PFD or HAMA hydrogels after laminectomy by in vivo studies in rats. We describe a safe and efficient anti-adhesive PFD-loaded HAMA hydrogel that prevents epidural fibrosis through the stable and sustained release of PFD. It was shown that the PFD-loaded HAMA hydrogel effectively inhibited cell penetration and suppressed collagen I/III expression. Thus, it effectively prevented the formation of adhesions through pharmacological and physical processes. The PFD-loaded HAMA hydrogel can effectively prevent adhesion formation in both pharmacological and physical barrier effects.

Fibrous hydrogels by electrospinning: Novel platforms for biomedical applications

Hydrogels, hydrophilic and biocompatible polymeric networks, have been used for numerous biomedical applications because they have exhibited abilities to mimic features of extracellular matrix (ECM). In particular, the hydrogels engineered with electrospinning techniques have shown great performances in biomedical applications. Electrospinning techniques are to generate polymeric micro/nanofibers that can mimic geometries of natural ECM by drawing micro/nanofibers from polymer precursors with electrical forces, followed by structural stabilization of them. By exploiting the electrospinning techniques, the fibrous hydrogels have been fabricated and utilized as 2D/3D cell culture platforms, implantable scaffolds, and wound dressings. In addition, some hydrogels that respond to external stimuli have been used to develop biosensors. For comprehensive understanding, this review covers electrospinning processes, hydrogel precursors used for electrospinning, characteristics of fibrous hydrogels and specific biomedical applications of electrospun fibrous hydrogels and highlight their potential to promote use in biomedical applications.

The potential of functionalized dressing releasing flavonoids facilitates scar-free healing

Scars are pathological marks left after an injury heals that inflict physical and psychological harm, especially the great threat to development and aesthetics posed by oral and maxillofacial scars. The differential expression of genes such as transforming growth factor-β, local adherent plaque kinase, and yes-related transcriptional regulators at infancy or the oral mucosa is thought to be the reason of scarless regenerative capacity after tissue defects. Currently, tissue engineering products for defect repair frequently overlook the management of postoperative scars, and inhibitors of important genes alone have negative consequences for the organism. Natural flavonoids have hemostatic, anti-inflammatory, antioxidant, and antibacterial properties, which promote wound healing and have anti-scar properties by interfering with the transmission of key signaling pathways involved in scar formation. The combination of flavonoid-rich drug dressings provides a platform for clinical translation of compounds that aid in drug disintegration, prolonged release, and targeted delivery. Therefore, we present a review of the mechanisms and effects of flavonoids in promoting scar-free regeneration and the application of flavonoid-laden dressings.

Epidural Fat Tissue Is More Effective for Scar Prevention Than Conventional Subcutaneous Fat Grafting After Laminectomy in a Mouse Model

STUDY DESIGN

Basic science study.

OBJECTIVE

The aim of this study was to examine whether epidural fat tissue (EFT) transplantation can prevent epidural adhesion after laminectomy more efficiently than subcutaneous fat tissue (SFT) transplantation.

SUMMARY OF BACKGROUND DATA

Epidural adhesion is almost inevitable after laminectomy. Although many materials have been used to prevent adhesion, none has been widely accepted. As EFT is an ectopic fat tissue located on the dura mater and there is no adhesion between EFT and the dura mater, we focused on the efficacy of EFT for adhesion prevention.

METHODS

We examined the differences in histology and gene expression between EFT and SFT of mice. We performed laminectomy at the 10th thoracic level and immediately transplanted EFT or SFT to the dura mater in mice. At 6 weeks after transplantation, we performed histological and gene expression analyses and evaluated the adhesion tenacity. In addition, we examined the characteristic differences between human EFT and SFT.

RESULTS

The adipocytes of EFT were significantly smaller than those of SFT in mice and humans. The gene expression of inflammatory cytokine and fibrosis-related factors was significantly higher in SFT than in EFT. At 6 weeks after transplantation, the percentage of the remaining fat area over the dura mater was significantly greater in the EFT group than in SFT group, and the adhesion tenacity score was significantly lower in the EFT group than that in the SFT group. An RNA sequencing analysis revealed 1921 differentially expressed genes (DEGs) between human EFT and SFT, and a Gene Ontology term associated with the inflammatory response was most highly enriched in SFT.

CONCLUSION

EFT has different molecular and histological profiles from SFT and EFT grafting is more effective for epidural adhesion prevention than conventional SFT transplantation after laminectomy in a mouse model.Level of Evidence: N/A.

Engineering and Evaluation of Forcespun Gelatin Nanofibers as an Isorhamnetin Glycosides Delivery System

Opuntia ficus-indica (L.) Mill (OFI) is considered a natural source of bioactive phytochemicals, mainly isorhamnetin glycosides (IRGs). These compounds have demonstrated antioxidant, anti-inflammatory, and anticancer activities, among others. The development of a suitable delivery system for these compounds is needed to improve their chemical and biological stability. This study aimed to evaluate the feasibility of fabrication and characterization of IRG-loaded gelatin (GL) forcespun fibers and crosslinking with glutaraldehyde (GTA). Two different percentages (25% and 30% w/v) of GL were evaluated with 12% (w/v) OFI flour to obtain nanofibers GL/OFI1 and GL/OFI2, respectively. The morphology and physicochemical properties of the fibers were investigated. The results indicated that the diameters of the fibers were on the nanoscale. The amount of IRGs was determined using high-performance liquid chromatography (HPLC). The IRGs release and the cytocompatibility of the nanofibers were also evaluated. GL concentration significantly affected the IRG release. Among both nanofibers, the GL/OFI2 nanofiber achieved a cumulative IRGs release of 63% after 72 h. Both fibers were shown to be biocompatible with human skin/fibroblast cells. Specifically, GL/OFI1 nanofibers exhibited favorable features for their application as an extract-coupled release system. The IRGs-embedded GL nanofiber mats may become a good alternative for the delivery of phytochemicals for the health sector and biomedical applications.

Ibuprofen-Loaded Electrospun PCL/PEG Nanofibrous Membranes for Preventing Postoperative Abdominal Adhesion

Electrospun nanofibrous membranes are a widely used physical barrier for reducing postoperative adhesion. However, these physical barriers could not prevent adhesion formation completely. Because a high-intensity inflammation occurs in the surgical area, the presence of relevant drugs to control such an inflammation is desperately needed. In this study, we fabricated an electrospun composite ibuprofen-loaded poly(ethylene glycol) (PEG)/polycaprolactone (PCL) nanofibrous membrane (NFM) to prevent abdominal adhesions. This membrane aimed to act as a barrier between the abdominal wall and surrounding tissues, without interrupting mass transfer and normal wound healing. Among various fabricated composite NFMs, PCL/25PEG-6% NFMs showed the lowest fiber diameter (448.8 ± 124.4 nm), the smallest pore size (<2 μm), and moderate ultimate stress and strain. The PCL/25PEG-6% NFMs had the lowest water contact angle (≈75°) and the highest drug profile release (≈80%) within 14 days. Furthermore, in vitro toxicity examination of PCL/25PEG-6% toward fibroblast cells demonstrated a cell viability of ≈82% after 3 days, proving its prolonged antiadhesion ability. In addition, the low number of adherent cells with a rounded shape and low cell proliferation on these NFMs indicated their special antiadhesive effects. Collectively, these results indicated that the PCL/25PEG-6% membrane might be a suitable barrier to prevent abdominal adhesion.

Nanofiber Systems as Herbal Bioactive Compounds Carriers: Current Applications in Healthcare

Nanofibers have emerged as a potential novel platform due to their physicochemical properties for healthcare applications. Nanofibers’ advantages rely on their high specific surface-area-to-volume and highly porous mesh. Their peculiar assembly allows cell accommodation, nutrient infiltration, gas exchange, waste excretion, high drug release rate, and stable structure. This review provided comprehensive information on the design and development of natural-based polymer nanofibers with the incorporation of herbal medicines for the treatment of common diseases and their in vivo studies. Natural and synthetic polymers have been widely used for the fabrication of nanofibers capable of mimicking extracellular matrix structure. Among them, natural polymers are preferred because of their biocompatibility, biodegradability, and similarity with extracellular matrix proteins. Herbal bioactive compounds from natural extracts have raised special interest due to their prominent beneficial properties in healthcare. Nanofiber properties allow these systems to serve as bioactive compound carriers to generate functional matrices with antimicrobial, anti-inflammatory, antioxidant, antiseptic, anti-viral, and other properties which have been studied in vitro and in vivo, mostly to prove their wound healing capacity and anti-inflammation properties.

Curcumin polymeric membranes for postoperative peritoneal adhesion: Comparison of nanofiber vs. film and phospholipid-enriched vs. non-enriched formulations

Intra-abdominal adhesion remains a major postoperative problem and is able to place individuals at lifelong risk of serious complications. Among available approaches, insertion of a barrier membrane at the site of injury partially inhibited adhesion formation. Moreover, the local administration of an anti-adhesive agent showed some favorable effects. In this study, we aimed to prepare and fully characterize polycaprolactone (PCL)-based film casts and electrospun nanofibers (NFs) containing a natural anti-inflammatory agent, curcumin (CUR), with extended-release properties. We also compared their efficiencies in preventing tissue adhesions. Additionally, the impact of soy phosphatidylcholine (SPC) enrichment on adhesion prevention was investigated. Prepared membranes were evaluated in terms of surface morphology (SEM, AFM), surface wettability, CUR release profiles, structural properties (FTIR, XRD, DSC), and mechanical behaviors. To further analyze the anti-adhesion effectiveness, a cecal abrasion model was performed on rats. SEM and AFM images showed a smoother surface in SPC-containing films. Concerning NFs, uniform bead-free fibers were observed and SPC containing NFs showed higher conductivity and lower viscosity and therefore, smaller fibers. All formulations exhibited sustained drug release over 4 weeks. In vivo findings revealed the superior performance of films compared to NFs and phospholipid-enriched formulations over non-enriched ones. Among all film formulations and in comparison to the positive control (Seprafilm®), CUR-SPC-PCL films significantly reduced peritoneal adhesions, as evidenced by gross examination, histological evaluation and immunohistochemical (IHC) analysis. The remarkable in vivo anti-adhesion activity together with suitable in vitro properties have made CUR-SPC-PCL films a promising system for postoperative anti-adhesion purposes in the clinic.

Electrospun poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan ternary nanofibers with antibacterial activity for treatment of skin infections

In recent years, there is an increasing attention on biocompatible electrospun nanofibers for drug delivery applications since they provide high surface area, controlled and sustained drug release, and they mimic the extracellular matrix. In the present study, tetracycline hydrochloride (TCH) antibiotic loaded poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan nanofibrous membranes were fabricated as a controlled drug delivery system. Poly(ω-pentadecalactone-co-ε-caprolactone) copolymer has been enzymatically synthesized in previous studies, thus it provides an originality to the membrane. Combination of a synthetic polymer, a protein, and a polysaccharide in order to obtain a synergetic effect is another novelty of this work and there exists limited examples for such electrospun membrane. Varied amounts of TCH was electrospun together with poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan (50/40/10 vol ratio) polymer blend (fiber diameters ranged between 85.7-225.2 nm) and several characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to examine the drug incorporation. Subsequently, in vitro drug release studies were conducted and mathematical modeling was applied for the detection of transport mechanism of drug. TCH release proceeded 14 days through an initial burst release in first hour and followed by a sustained release. 1% TCH-loaded sample was shown as optimal preparation with 96.5% total drug release and 11.8% initial burst release. TCH-loaded preparations demonstrated a good antibacterial activity against Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria and a limited effect (no inhibition zone observed below 3% TCH concentration) against Gram-negative (Escherichia coli) bacterium. Thus, TCH concentrations of ≥ 3% could be preferred to obtain a wide-spectrum effectiveness. The presented drug delivery system is suggested to be applied for treatment of skin infections as a wound dressing device.

IFN-α-2b Inhibits the Proliferation and Migration of Fibroblasts via the TGFβ/Smad Signaling Pathway to Reduce Postoperative Epidural Fibrosis

Epidural fibrosis after lumbar laminectomy refers to a serious complication, and excessive proliferation of fibroblasts is considered the major factor. Interferon-alpha-2b (IFN-α-2b) can exert antiviral and antiproliferative effects, which has been suggested to effectively prevent several fibrotic diseases. However, the effect of IFN-α-2b on the prevention of epidural fibrosis (EF) and its possible mechanism remain unclear. In this study, in vitro and in vivo experiments were performed to examine the possible mechanism of IFN-α-2b for preventing EF. Cell counting kit-8 (CCK-8), cell cycle test, Edu incorporation, wound healing assay, transwell test, and Western blotting assay were performed to investigate the inhibitory effect of IFN-α-2b on the proliferation and migration of fibroblasts in vitro. As indicated from the results, IFN-α-2b was capable of inhibiting proliferation and migration of fibroblasts and inhibiting the activity of the transforming growth factor β (TGFβ)/Smad signaling pathway. In vivo, the effect of IFN-α-2b on the reduction of EF was determined by performing histological macroscopic evaluation and histological and immunohistochemical staining. As suggested from the results, IFN-α-2b significantly inhibited EF after laminectomy. As revealed from the mentioned results, IFN-α-2b may have a promising application for preventing EF in the future.

Antifibrotic Effect of Bletilla striata Polysaccharide-Resveratrol-Impregnated Dual-Layer Carboxymethyl Cellulose-Based Sponge for The Prevention of Epidural Fibrosis after Laminectomy

The application of antifibrotic materials can alleviate epidural fibrosis by restricting excessive fibroblast proliferation and mitigating scar tissue formation. Here, a biodegradable carboxymethyl cellulose (CMC)-Bletilla striata polysaccharide (BSP)-resveratrol (RES) sponge was fabricated to inhibit scar tissue formation post laminectomy surgery. Fibroblasts NIH/3T3, myoblasts C2C12, neural cells PC-12, and Schwann cells RSC96 were used to evaluate the in vitro cytocompatibility. Laminectomies on 10 Sprague–Dawley rats with/without the application of the CMC-BSP-RES sponge were performed. The severity of adhesion between the dura mater and formed scar tissue was qualitatively scored. All cell lines exhibited good viability with no significant difference in cytotoxicity when cultured with variable extractions of the CMC-BSP-RES sponge. S100a4 and P4hb expressions were downregulated in NIH/3T3 cultured in the CMC-BSP-RES sponge, implying that this sponge potentially inhibits fibroblast activity. No post-operative shrinkage or dura mater expansion along the surgical site was detected. The peel-off tests revealed that the tenacity of adhesion de-creased. Histopathological examinations verified that the average number of fibroblasts in the CMC-BSP-RES group considerably decreased. The CMC-BSP-RES sponge is a biocompatible and effective material for alleviating post-operative epidural fibrosis and mitigating fibroblast expression following laminectomy.

Microsphere-Embedded Hydrogel Sustained-Release System to Inhibit Postoperative Epidural Fibrosis

As a common complication of spine surgery, postoperative epidural fibrosis is an important cause of failed back surgery syndrome (FBSS), yet there is no effective clinical intervention to tackle it. Herein, for the first time, we develop a strategy of combining a gelatin methacryloyl (GelMA) hydrogel matrix with poly(lactic-co-glycolic acid) (PLGA) microsphere-encapsulated resveratrol (RSV), which aims to synergistically promote the inhibition effect on epidural fibrosis. The resultant RSV@PLGA-GelMA (8% w/v) hydrogels possess optimal mechanical properties and prompt the matrix sustainably and stably to release RSV for several weeks. It is further shown that the hybrid hydrogels without the drug exhibit good biosafety without distinct cytotoxicity, while RSV@PLGA-GelMA could prevent fibroblast proliferation and migration. Further rat laminectomy model indicates that the RSV@PLGA-GelMA hydrogels reduce epidural fibrosis by inhibiting fibroblast proliferation and extracellular matrix overexpression and deposition via a TGF-β/Smad signaling pathway. Consequently, we believe that such a creative structural combination will be a promising strategy for preventing postoperative epidural fibrosis of spine surgery.

Facile fabrication of phospholipid-functionalized nanofiber-based barriers with enhanced anti-adhesion efficiency

Electrospun nanofibrous membranes (NFMs) have attracted considerable attention as a potential physical barrier for reducing postoperative adhesion. However, no anti-adhesion barrier can completely prevent adhesion formation. In this study, phospholipid-functionalized NFMs were readily fabricated by one-step electrospinning to obtain nanofiber-based barriers with enhanced wettability and anti-adhesion efficiency. The optimized phospholipid NFMs were shown to have a fiber diameter of 831 nm ± 135 nm that is drastically decreasing, high porosity of 87.6 % ± 1.1 %, and superior hydrophilicity. Moreover, the phospholipid NFMs with excellent cytocompatibility exhibited fibroblasts being significantly reduced (≈ 51 %) after incubation of 3 days compared to that of the NFMs (≈ 96 %), confirming long-lasting anti-adhesion capability against fibroblasts. Meanwhile, less cell adhesion and proliferation of Raw 264.7 macrophages on NFM-10Lec indicated its superior anti-inflammatory effects. Thus, the facile phospholipid-functionalized nanofibers provided a promising strategy for anti-adhesion applications.

A review: progress in preventing tissue adhesions from a biomaterial perspective

Postoperative adhesions (POA) are one of the main problems suffered by patients and are a common complaint. It is considered to be closely associated with the healing mechanism of damaged tissues. Tissue adhesions accompany other symptoms such as inflammation, pain, and even dyskinesia under certain conditions, compromising the patients' quality of life. On the other hand, common treatments involve high costs, re-surgery or long-term hospital stays. Therefore, alternative approaches need to be formulated so that aforementioned problems can be resolved. To this end, a review of recent advances in this context is imperative. In this review, we have highlighted the mechanism of adhesion formation, advances in common therapeutic approaches, and prospective treatments in preventing tissue adhesions. Based on the literature, it can be determined that the disadvantages of available commercial products in the treatment of tissue adhesion have led researchers to utilize alternative methods for designing anti-adhesive products with different structures such as electrospun fibrous mats, hydrogels, and nanospheres. These studies are on the fast track in producing optimal anti-adhesion materials. We hope that this article can attract attention by showing various mechanisms and solutions involved in adhesion problems and inspire the further development of anti-adhesion biomaterials.

Potential of a facile sandwiched electrospun scaffold loaded with ibuprofen as an anti-adhesion barrier

The combination of nanofibre-based barriers and anti-adhesion drugs is potentially useful for adhesion prevention after ventral surgeries. However, drug molecules exposed to the surface of barriers easily result in an initial burst that is sharp, thus limiting the anti-adhesion efficiency. In this study, we developed a sandwiched electrospun scaffold loaded with ibuprofen (Sandwich) serving as a physical barrier, as well as an effectual carrier delivering it into the injured site for enhancing anti-adhesion capability. This Sandwich scaffold exhibited significantly a reduced initial burst of drug release in the first hour and a prolonged delivery for ibuprofen over 14 days, expected to provide the long-term anti-adhesion capability. In vitro study on fibroblasts showed that incorporation of ibuprofen effectively inhibited their adhesion and proliferation, and developed Sandwich maintained the least adhesion of L-929 after 5 days of culture (<20%). For RAW 264.7 macrophages, worse cell adhesion and poorer TNF-α production of Sandwich indicated its superior anti-inflammatory effect. In summary, the sandwiched ibuprofen-loaded scaffold showed promising potential for preventing adhesion formation.

Electrospun Icariin-Loaded Core-Shell Collagen, Polycaprolactone, Hydroxyapatite Composite Scaffolds for the Repair of Rabbit Tibia Bone Defects

Background

Electrospinning is a widely used technology that can produce scaffolds with high porosity and surface area for bone regeneration. However, the small pore sizes in electrospun scaffolds constrain cell growth and tissue-ingrowth. In this study, novel drug-loading core-shell scaffolds were fabricated via electrospinning and freeze drying to facilitate the repair of tibia bone defects in rabbit models.

Materials and Methods

The collagen core scaffolds were freeze-dried containing icariin (ICA)-loaded chitosan microspheres. The shell scaffolds were electrospun using collagen, polycaprolactone and hydroxyapatite materials to form CPH composite scaffolds with the ones containing ICA microspheres named CPHI. The core-shell scaffolds were then cross-linked by genipin. The morphology, microstructure, physical and mechanical properties of the scaffolds were assessed. Rat marrow mesenchymal stem cells from the wistar rat were cultured with the scaffolds. The cell adhesion and proliferation were analysed. Adult rabbit models with tibial plateau defects were used to evaluate the performance of these scaffolds in repairing the bone defects over 4 to 12 weeks.

Results

The results reveal that the novel drug-loading core-shell scaffolds were successfully fabricated, which showed good physical and chemical properties and appropriate mechanical properties. Furthermore, excellent cells attachment was observed on the CPHI scaffolds. The results from radiography, micro-computed tomography, histological and immunohistochemical analysis demonstrated that abundant new bones were formed on the CPHI scaffolds.

Conclusion

These new core-shell composite scaffolds have great potential for bone tissue engineering applications and may lead to effective bone regeneration and repair.