Design of a transdermal formulation containing raloxifene nanoparticles for osteoporosis treatment

Copolymerized Polymers Based on Cyclodextrins and Cationic Groups Enhance Therapeutic Effect of Rebamipide in the N-Acetylcysteine-Treated Dry Eye Model

Purpose

We aimed to prepare a β-cyclodextrin (β-CD) polymer using radical polymerization with co-monomers, 6-deoxy-6-(2-methacryloyloxyethylsuccinamide)-β-cyclodextrin (CD-MSAm) and N,N,N-trimethyl-N-(2-hydroxy-3-metacryloyloxopropyl)-ammonium chloride (QA) to design cyclodextrins suitable for use in ophthalmology. In addition, we evaluated their solubility and inclusion properties with rebamipide (REB), a poorly soluble drug, and investigated the usefulness of the β-CD polymer and REB (REB@CDQA) combination in treating dry eye.

Methods

The β-CD polymer (CD-MSAm-co-QA, CDQA) based on CD-MSAm/QA was prepared via radical polymerization, and the usefulness of REB@CDQA in treating dry eye was evaluated using a rabbit treated with N-acetylcysteine (dry eye model).

Results

The solubility of the CDQA powder was higher than that of the β-CD powder, and 80 nm colloids were observed in the CDQA solution. No corneal toxicity was observed in human corneal epithelial cells or rat corneas treated with 0.2% CDQA solution. The levels of REB dissolved in the CDQA solution were higher than those of the β-CD solution. Moreover, the application of the CDQA solution enhanced REB retention in the cornea and attenuated the transcorneal penetration of REB. In addition, instillation of REB@CDQA enhanced the volume of the lacrimal fluid and normalized the reduced mucin levels in the dry eye model. The extent of tear film breakup was attenuated by REB@CDQA instillation.

Conclusion

The CDQA solution enhanced the solubility of REB, and the combination of CDQA and REB enhanced the drug content in the corneal tissue. Moreover, the therapeutic effect on dry eye was higher than that of REB suspensions without CDQA.

[Development of Transdermal Formulation Based on Nanotechnology and Elucidation of Its Drug Delivery Pathways]

Transdermal drug delivery is a formulation in which the drug is absorbed through the skin for systemic action. Its advantages include avoidance of first-pass effects, sustained drug supply, and ease of administration and discontinuation. Drugs administered transdermally transfer into the blood circulation through the stratum corneum, epidermis, and dermis. The stratum corneum on the skin surface plays a barrier function in skin absorption. Therefore, developing of transdermal drug delivery systems requires innovations that overcome the barrier function of the stratum corneum and improve skin permeation. This review examines the usefulness of transdermal formulations based on solid nanoparticles using raloxifene. Milled raloxifene was gelled with (mRal-NPs) or without menthol (Ral-NPs) using Carbopol. The drug release and transdermal penetration were measured using a Franz diffusion cell, and the therapeutic evaluation of osteoporosis was determined in an ovariectomized rat model. Although the raloxifene released from Ral-NPs remained in the nanoparticle state, the skin penetration of raloxifene nanoparticles was prevented by the stratum corneum in rat. The inclusion of menthol in the formulation attenuated the barrier function of the stratum corneum and permitted raloxifene nanoparticles to penetrate through the skin. Moreover, macropinocytosis relates to the formulation's skin penetration, including menthol (mRal-NPs). Applying mRal-NPs attenuated the decreases in calcium level and stiffness of bones of ovariectomized rats. This information can support future studies aimed at designing novel transdermal formulations.

An update on the advances in the field of nanostructured drug delivery systems for a variety of orthopedic applications

Nanotechnology has made significant progress in various fields, including medicine, in recent times. The application of nanotechnology in drug delivery has sparked a lot of research interest, especially due to its potential to revolutionize the field. Researchers have been working on developing nanomaterials with distinctive characteristics that can be utilized in the improvement of drug delivery systems (DDS) for the local, targeted, and sustained release of drugs. This approach has shown great potential in managing diseases more effectively with reduced toxicity. In the medical field of orthopedics, the use of nanotechnology is also being explored, and there is extensive research being conducted to determine its potential benefits in treatment, diagnostics, and research. Specifically, nanophase drug delivery is a promising technique that has demonstrated the capability of delivering medications on a nanoscale for various orthopedic applications. In this article, we will explore current advancements in the area of nanostructured DDS for orthopedic use.

Therapeutic Effects of Hydrogel Formulations Incorporating Troxipide Nanoparticles on Oral Mucositis in Hamsters

Purpose

Medical therapies, such as the use of anti-inflammatory agents, are commonly used for the treatment of oral mucositis (OM). However, these treatments have limited efficacy in treating severe cases of OM. In this study, we aimed to develop a carbopol gel incorporating troxipide (TRO) nanoparticles and methylcellulose (TRO-NP gel) and demonstrate its efficacy in accelerating wound healing in a hamster model of OM (OM model) induced by acetic acid injection.

Methods

TRO nanoparticles were prepared using bead milling. The crystalline form was determined by powder X-ray diffraction, and the particle size was measured using a NanoSight LM10 instrument. The drug release was determined using a Franz diffusion cell, and the hamsters injected with acetic acid were selected to evaluate the therapeutic effect of OM.

Results

After preparing TRO nanoparticles, we observed a mixture of crystals and amorphous TRO, and the particle size of TRO in the TRO-NP gel ranged from 50 to 280 nm. The TRO-NP gel exhibited a more uniform TRO distribution and viscosity compared to the Carbopol gel containing TRO microparticles (TRO-MP gel). However, the solubility of TRO was comparable in both TRO-MP and TRO-NP gels. The TRO-NP gel released a higher amount of TRO than that from the TRO-MP gel, with detectable release of TRO nanoparticles. TRO levels in the cheek pouches of hamsters treated with TRO-NP gel were higher than those treated with TRO-MP gel. The increased TRO levels in the cheek pouches of hamsters treated with TRO-NP gel were attenuated by treatment with 40 μM dynasore, an inhibitor of clathrin-dependent endocytosis (CME). Moreover, the therapeutic effect of the TRO-NP gel was superior to that of the TRO-MP gel in the hamster model of OM.

Conclusion

We have designed a TRO-NP gel, and this gel showed excellent TRO delivery into the cheek pouch tissue through the CME pathway. Moreover, the TRO-NP gel treatment enhanced wound healing after acetic acid injection.

Nasal Absorption Enhancement of Mometasone Furoate Nanocrystal Dispersions

Purpose

We designed a 0.05% mometasone furoate (MF) nanocrystal dispersion and investigated whether the application of MF nanocrystals in nasal formulations enhanced local absorption compared to traditional nasal MF formulations (CA-MF).

Methods

MF nanocrystal dispersions (MF-NPs) were prepared by bead milling MF microcrystal dispersions (MF-MPs) consisting of MF, 2-hydroxypropyl-β-cyclodextrin, methylcellulose, and purified water. Pluronic F-127 combined with methylcellulose, Pluronic F-68, or carbopol was used as a base for in situ gelation (thickener). MF concentrations were measured using high-performance liquid chromatography, and nasal absorption of MF was evaluated in 6 week-old male Institute of Cancer Research (ICR) mice.

Results

The particle size range of MF prepared with the bead mill treatment was 80-200 nm, and the nanoparticles increased the local absorption of MF, which was higher than that of CA-MF and MF-MPs. In addition, unlike the results obtained in the small intestine and corneal tissue, the high absorption of nanocrystalline MF in the nasal mucosa was related to a pathway that was not derived from energy-dependent endocytosis. Moreover, the application of the in situ gelling system attenuated the local absorption of MF-NPs, owing to a decrease in drug diffusion in the dispersions.

Conclusion

We found that nanoparticulation of MF enhances local intranasal absorption, and nasal bioavailability is higher than that of CA-MF. In addition, we demonstrate that viscosity regulation is an important factor in the design of nasal formulations based on MF nanocrystals. These findings provide insights for the design of novel nanomedicines with enhanced nasal bioavailability.

Formulation, optimization and characterization of raloxifene hydrochloride loaded PLGA nanoparticles by using Taguchi design for breast cancer application

Multidrug resistance in breast cancer and the associated side-effects of anticancer therapies are significant hurdles in chemotherapy-based treatment. Biodegradable polymeric nano-based targeted drug delivery technologies showed tremendous advantages in targeted local delivery with limited off-targeted side effects. Therefore, there is a persistent need to develop targeted nanomedicine systems for treatment of breast cancer. The current research attempted to develop poly (lactic-co-glycolic acid) nanoparticles loaded with raloxifene by modified emulsification solvent diffusion evaporation method to improve oral bioavailability by using Taguchi design. It was observed that the optimized formulation (1:4 drug to polymer ratio) poly (lactic-co-glycolic acid) showed a mean particle size and Polydispersity index of 218 ± 23.7 nm and 0.231 ± 0.04, respectively. The entrapment efficiency was found to be 82.30% ± 1.02%. In vitro drug delivery was found to be 92.5% ± 1.48% in 40 h. The nanoparticles were to remain stable at 2°C-8°C even after 30 days. Differential scanning calorimetry and Fourier transform infrared spectroscopy characterization techniques showed that there was no interaction between the drug and excipient. Stability studies indicate that polymeric nanoparticles were stable at 2°C-8°C after 6 months. Raloxifene nanoparticles may be the most potent targeting moieties to treat highly invasive and metastatic MCF-7 breast cancer cells.

Skin absorption of felbinac solid nanoparticles in gel formulation containing l-menthol and carboxypolymethylene

BACKGROUND

It is important to design an effective formulation to enhance the skin penetration, and nanotechnologies have been used in dermal and transdermal drug delivery. In this study, we prepared formulations (gels) containing l-menthol and felbinac (FEL) solid nanoparticles (FEL-NP gel) for topical application, and investigated the local and systemic absorption of the prepared FEL-NP gel.

METHODS

FEL solid nanoparticles were obtained by bead milling of FEL powder (microparticles), and a topical formulation (FEL-NP gel) consisting of 1.5% FEL solid nanoparticles), 2% carboxypolymethylene, 2% l-menthol, 0.5% methylcellulose, and 5% 2-hydroxypropyl-β-cyclodextrin (w/w %) were prepared.

RESULTS

The particle size of FEL nanoparticles was 20-200 nm. The released FEL concentration from FEL-NP gel was significantly higher than that from FEL gel without bead mill treatment (carboxypolymethylene gel in which FEL microparticles (MPs) instead of FEL nanoparticles were incorporated, FEL-MP gel), and FEL was released as nanoparticles from the gel. Moreover, both transdermal penetration and percutaneous absorption of FEL-NP gel were significantly increased compared with those of FEL-MP gel, and the area under the FEL concentration-time curve (AUC) of FEL-NP gels was 1.52- and 1.38-fold of commercially available FEL ointment and FEL-MP gel, respectively. In addition, after 24 h of treatment, the FEL content in rat skin treated with FEL-NP gels was 1.38- and 2.54-fold higher than that when treated with commercially available FEL ointment and FEL-MP gel, respectively. Moreover, the enhanced skin penetration of FEL-NP gels was significantly attenuated by inhibition of energy-dependent endocytosis, such as clathrin-mediated endocytosis.

CONCLUSIONS

We successfully prepared a topically applied carboxypolymethylene gel containing FEL nanoparticles. In addition, we observed that the endocytosis pathway was mainly related to the high skin penetration of FEL nanoparticles, and FEL-NP gel application resulted in high local tissue concentration and systemic absorption of FEL. These findings provide useful information for the design of topically applied nanoformulations against inflammation by providing local and systemic effects.

Mechanistic advances in osteoporosis and anti-osteoporosis therapies

Osteoporosis is a type of bone loss disease characterized by a reduction in bone mass and microarchitectural deterioration of bone tissue. With the intensification of global aging, this disease is now regarded as one of the major public health problems that often leads to unbearable pain, risk of bone fractures, and even death, causing an enormous burden at both the human and socioeconomic layers. Classic anti-osteoporosis pharmacological options include anti-resorptive and anabolic agents, whose ability to improve bone mineral density and resist bone fracture is being gradually confirmed. However, long-term or high-frequency use of these drugs may bring some side effects and adverse reactions. Therefore, an increasing number of studies are devoted to finding new pathogenesis or potential therapeutic targets of osteoporosis, and it is of great importance to comprehensively recognize osteoporosis and develop viable and efficient therapeutic approaches. In this study, we systematically reviewed literatures and clinical evidences to both mechanistically and clinically demonstrate the state-of-art advances in osteoporosis. This work will endow readers with the mechanistical advances and clinical knowledge of osteoporosis and furthermore present the most updated anti-osteoporosis therapies.

Nanotechnology for Targeted Drug Delivery to Treat Osteoporosis

Bone diseases such as rheumatoid arthritis, Paget's disease, and osteoporosis cause mortality and mobility limits. Nanomedicine and nano delivery systems have been utilised to deliver active drug moiety to the precisely targeted site in a controlled manner, and it serves as a means of diagnostic tools. The utilisation of nanomedicine is expanding vigorously for assured targeting and efficient drug delivery. Nanotechnology offers various advantages, such as site-specific targeting, precise drug release kinetics, and improved bone mineral density. Recent medications available for osteoporosis are not viable due to the adverse effects associated with them and low patient compliance. There is an urgent need to develop biocompatible and appropriate drug delivery nanocarriers such as nanoparticles, liposomes, hydrogels, dendrimers, micelles, mesoporous particles, etc. These carriers enhance drug delivery and therapeutic effectiveness in bone tissues. The use of nanotechnology is also associated with toxicity. This article presents the review of various reports on nanocarrier systems and biologics for the treatment of osteoporosis. It aims to provide researchers with a clue for inventing a new drug delivery system with site-specific targeting for the treatment of osteoporosis.

QbD-based optimization of raloxifene-loaded cubosomal formulation for transdemal delivery: ex vivo permeability and in vivo pharmacokinetic studies

Raloxifene (RLX) is a drug that is commonly recommended to postmenopausal women at high risk of invasive breast cancer and to prevent osteoporosis. However, limited water solubility (0.000512 mg/ml) and low oral bioavailability (2%) of RLX limit its therapeutic utility. The objective of the present study was to develop an alternative transdermal delivery of RLX to improve its absorption, bypass first pass metabolism, and subsequently improve bioavailability. RLX-loaded cubosomes were prepared using the ethanol injection method followed by microfluidization technique and optimized using the QbD-based 2³ factorial design. The average particle size, entrapment efficiency, and zeta potential of the optimized formulation were found to be 110.6 nm, 98.23%, and 26.2 mV, respectively. In vitro dissolution study indicated that the RLX-loaded cubosomes released 98.26% of the drug compared to pure RLX dispersion (58.6%). Histopathological examination revealed no sign of inflammation, indicating the safety of the developed formulation. Accelerated stability study as per ICH guidelines displayed no significant change in the formulation characteristics and drug-related performance of the developed formulation. Ex vivo permeability studies demonstrated a prolonged release from cubosomal formulation. In vivo pharmacokinetic studies revealed that the relative bioavailability of the optimized transdermal RLX-loaded cubosomes increased by 2.33-fold and 1.22-fold when compared with the oral RLX dispersion and transdermal RLX hydro-ethanolic solution respectively. IVIVC showed level C correlation with linear regression. Thus, the developed RLX-loaded cubosomes may have potential to overcome the problems associated with the existing marketed oral dosage forms of RLX.

[Effects of Skin Environmental Changes by Steam Towel, Ethanol, l-Menthol and Carpronium on the Drug Behavior in the Minoxidil Nanoparticles-applied Mice]

We previously designed the formulation containing minoxidil (MXD) nanoparticles (MXD-NPs), and found that the MXD-NPs can mainly deliver MXD into hair bulbs via hair follicles pathway, and that the therapeutic efficiency for hair growth is higher in comparison with the formulation containing dissolved MXD. In this study, we investigated whether the skin environmental changes by the treatment of steam towel, ethanol, l-menthol and commercially available (CA) carpronium affect the drug behavior in the MXD-NPs-applied mice. The steam towel, ethanol, l-menthol and CA-carpronium were pre-treated 3 min before MXD-NPs application, and the MXD content in the hair bulge, bulb, skin tissue and blood of mice were measured 4 h after MXD-NPs application. No significant difference of MXD levels in the blood was observed by the pre-treatment of steam towel, ethanol, l-menthol and CA-carpronium. On the other hand, the pre-treatment of steam towel and l-menthol enhanced the MXD levels in hair bulge and/or bulb. Although, the MXD levels in hair bulge and bulb were not changed by the pre-treatment of ethanol, the MXD levels in skin tissue was higher than that of saline-pre-treated group (control). The MXD levels in hair bulge, bulb and skin tissue of mice pre-treated with CA-carpronium were remarkably higher in comparison with control. In conclusion, we showed that the changes in skin environment by the steam towel, ethanol, l-menthol and CA-carpronium affected the absorption of MXD-NPs, and these increased MXD levels in the hair bulb and blood by the combination may enhance the therapeutic efficiency without side effects.

N,N-Diethyl-3-toluamide Formulation Based on Ethanol Containing 0.1% 2-Hydroxypropyl-β-cyclodextrin Attenuates the Drug's Skin Penetration and Prolongs the Repellent Effect without Stickiness

N,N-diethyl-3-toluamide (DEET) is one of the most widely used insect repellents in the world. It was reported that a solution containing 6-30% cyclodextrin (CD) as a solvent instead of ethanol (EtOH) provided an enhancement of the repellent action time duration of the DEET formulation, although the high-dose CD caused stickiness. In order to overcome this shortcoming, we attempted to prepare a 10% DEET formulation using EtOH containing low-dose CDs (β-CD, 2-hydroxypropyl-β-CD (HPβCD), methyl-β-CD, and sulfobutylether-β-CD) as solvents (DEET/EtOH/CD formulations). We determined the CD concentration to be 0.1% in the DEET/EtOH/CD formulations, since the stickiness of 0.1% CDs was not felt (approximately 8 × 10^-3 N). The DEET residue on the skin superficial layers was prolonged, and the drug penetration into the skin tissue was decreased by the addition of 0.1% CD. In particular, the retention time and attenuated penetration of DEET on the rat skin treated with the DEET/EtOH/HPβCD formulation was significantly higher in comparison with that of the DEET/EtOH formulation without CD. Moreover, the repellent effect of DEET was more sustained by the addition of 0.1% HPβCD in the study using Aedes albopictus. In conclusion, we found that the DEET/EtOH/HPβCD formulations reduced the skin penetration of DEET and prolonged the repellent action without stickiness.

Minoxidil Nanoparticles Targeting Hair Follicles Enhance Hair Growth in C57BL/6 Mice

We previously found that 1% minoxidil (MXD) nanoparticles prepared using a bead mill method led to an increase I n hair follicle delivery and hair growth in C57BL/6 mice. In the present study, we designed a nanoparticle formulation containing 5% MXD (MXD-NPs) using the bead mill method and investigated the hair-growth effect of MXD-NPs and a commercially available MXD solution (CA-MXD). Hair growth and in vivo permeation studies were conducted using C57BL/6 mice. Moreover, we examined the MXD contents in the upper (hair bulge) and the lower hair follicle (hair bulb) and observed the hair follicle epithelial stem cells (HFSC) by immunohistochemical staining using the CD200 antibody. The mean particle size of the MXD in the MXD-NPs was 139.8 nm ± 8.9 nm. The hair-growth effect of the MXD-NPs was higher than that of CA-MXD, and the MXD content in the hair bulge of mice treated with MXD-NPs was 7.4-fold that of the mice treated with CA-MXD. In addition, the activation of HFSC was observed around the bulge in the MXD-NPs-treated mice. We showed that MXD-NPs enable the accumulation of MXD in the upper hair follicles more efficiently than CA-MXD, leading the activation of HFSC and the hair growth.

Formulation Development for Transdermal Delivery of Raloxifene, a Chemoprophylactic Agent against Breast Cancer

Raloxifene (RLX) is a second-generation selective estrogen receptor modulator approved for the prevention of invasive breast cancer in women. Oral therapy of RLX requires daily intake and is associated with side effects that may lead to low adherence. We developed a weekly transdermal delivery system (TDS) for the sustained delivery of RLX to enhance the therapeutic effectiveness, increase adherence, and reduce side effects. We evaluated the weekly transdermal administration of RLX using passive permeation, chemical enhancers, physical enhancement techniques, and matrix- and reservoir-type systems, including polymeric gels. In vitro permeation studies were conducted using vertical Franz diffusion cells across dermatomed human skin or human epidermis. Oleic acid was selected as a chemical enhancer based on yielding the highest drug delivery amongst the various enhancers screened and was incorporated in the formulation of TDSs and polymeric gels. Based on in vitro results, both Eudragit- and colloidal silicon dioxide-based transdermal gels of RLX exceeded the target flux of 24 μg/cm²/day for 7 days. An infinite dose of these gels delivered 326.23 ± 107.58 µg/ cm² and 498.81 ± 14.26 µg/ cm² of RLX in 7 days, respectively, successfully exceeding the required target flux. These in vitro results confirm the potential of reservoir-based polymeric gels as a TDS for the weekly administration of RLX.

The Factors Determining the Skin Penetration and Cellular Uptake of Nanocarriers: New Hope for Clinical Development

The skin provides a protective barrier against toxic environments and also offers a valuable route for topical drug delivery. The stratum corneum (SC) is the outermost layer of the skin and serves as the major barrier to chemical transfer through the skin. The human skin barrier is particularly difficult to overcome because of the complex composition and structure of the SC. Nanoparticulate carriers have gained widespread attention in topical drug delivery due to their tunable and versatile properties. The present review summarizes the main factors involved in skin penetration of nanocarriers containing the drug. Employment of nanotechnology in topical delivery has grown progressively during recent years; however, it is important to monitor the skin penetration of nanocarriers prior to their use to avoid possible toxic effects. Nanocarriers can act as a means to increase skin permeation of drugs by supporting direct interaction with the SC and increasing the period of permanence on the skin. Skin penetration is influenced by the physicochemical characteristics of nanocarriers such as composition, size, shape, surface chemistry, as well as skin features. Considering that the target of topical systems based on nanocarriers is the penetration of therapeutic agents in the skin layers, so a detailed understanding of the factors influencing skin permeability of nanocarriers is essential for safe and efficient therapeutic applications.

Strategies for transdermal drug delivery against bone disorders: A preclinical and clinical update

The transdermal drug delivery system is an exceptionally safe and well-tolerable therapeutic approach that has immense potential for delivering active components against bone-related pathologies. However, its use is limited in the current clinical practices due to the low skin permeability of most active drugs in the formulation. Thus, innovations in the methodologies of skin permeation enhancement techniques are suggested to overcome this limitation. Although various transdermal drug delivery systems are studied to date, there are insufficient studies comparing the therapeutic efficacy of transdermal delivery systems to oral delivery systems. Thus, creating a decision-making dilemma between oral or transdermal therapies. Therefore, a timely review is inevitable to develop a platform for future researchers to develop next-generation transdermal drug delivery strategies against skeletal diseases that must be convenient and cost-effective for the patients with improved therapeutic efficacy. Here, we will outline the most recent strategies that can overcome the choice limitation of the drug and enhance the transdermal adsorption of various types of drugs to treat bone disorders. For the first time, in this review paper, we will highlight the preclinical and clinical studies on the different transdermal delivery methods. Thus, providing insight into the current therapeutic approaches and suggesting new directions for the advancements in transdermal drug delivery systems against bone disorders.

Biotherapeutic-loaded injectable hydrogels as a synergistic strategy to support myocardial repair after myocardial infarction

Myocardial infarction (MI) has been considered as the leading cause of cardiovascular-related deaths worldwide. Although traditional therapeutic agents including various bioactive species such as growth factors, stem cells, and nucleic acids have demonstrated somewhat usefulness for the restoration of cardiac functions, the therapeutic efficiency remains unsatisfactory most likely due to the off-target-associated side effects and low localized retention of the used therapeutic agents in the infarcted myocardium, which constitutes a substantial barrier for the effective treatment of MI. Injectable hydrogels are regarded as a minimally invasive technology that can overcome the clinical and surgical limitations of traditional stenting by a modulated sol-gel transition and localized transport of a variety of encapsulated cargoes, leading to enhanced therapeutic efficiency and improved patient comfort and compliance. However, the design of injectable hydrogels for myocardial repair and the mechanism of action of bioactive substance-loaded hydrogels for MI repair remain unclear. To elucidate these points, we summarized the recent progresses made on the use of injectable hydrogels for encapsulation of various therapeutic substances for MI treatment with an emphasis on the mechanism of action of hydrogel systems for myocardial repair. Specifically, the pathogenesis of MI and the rational design of injectable hydrogels for myocardial repair were presented. Next, the mechanisms of various biotherapeutic substance-loaded injectable hydrogels for myocardial repair was discussed. Finally, the potential challenges and future prospects for the use of injectable hydrogels for MI treatment were proposed for the purpose of drawing theoretical guidance on the development of novel therapeutic strategies for efficient treatment of MI.

Energy-Dependent Endocytosis Is Responsible for Skin Penetration of Formulations Based on a Combination of Indomethacin Nanoparticles and l-Menthol in Rat and Göttingen Minipig

We previously designed a Carbopol gel formulation (N-IND/MEN) based on a combination of indomethacin solid nanoparticles (IND-NPs) and l-menthol, and we reported that the N-IND/MEN showed high transdermal penetration. However, the detailed mechanism for transdermal penetration of IND-NPs was not clearly defined. In this study, we investigated whether endocytosis in the skin tissue of rat and Göttingen minipig is related to the transdermal penetration of IND-NPs using pharmacological inhibitors of endocytosis. The pharmacological inhibitors used in this study are as follows: 54 µM nystatin, a caveolae-mediated endocytosis (CavME) inhibitor; 40 µM dynasore, a clathrin-mediated endocytosis (CME) inhibitor; and 2 µM rottlerin, a micropinocytosis (MP) inhibitor. The N-IND/MEN was prepared by a bead mill method, and the particle size of solid indomethacin was 79–216 nm. In both rat and Göttingen minipig skin, skin penetration of approximately 80% IND-NPs was limited by the stratum corneum (SC), although the penetration of SC was improved by the combination of l-menthol. On the other hand, the treatment of nystatin and dynasore decreased the transdermal penetration of indomethacin in rats and Göttingen minipigs treated with N-IND/MEN. Moreover, in addition to nystatin and dynasore, rottlerin attenuated the transdermal penetration of IND-NPs in the Göttingen minipigs’ skin. In conclusion, we found that l-menthol enhanced the SC penetration of IND-NPs. In addition, this study suggests that the SC-passed IND-NPs are absorbed into the skin tissue by energy-dependent endocytosis (CavME, CME, and/or MP pathways) on the epidermis under the SC, resulting in an enhancement in transdermal penetration of IND-NPs. These findings provide significant information for the design of nanomedicines in transdermal formulations.

Transdermal System Based on Solid Cilostazol Nanoparticles Attenuates Ischemia/Reperfusion-Induced Brain Injury in Mice

Cilostazol (CIL) exerted a protective effect by promoting blood-brain barrier integrity as well as improving the status of neurological dysfunctions following cerebral ischemia/reperfusion (I/R) injury. We attempted to design a 0.5% CIL carbopol gel using solid nanoparticles (CIL-Ngel), and then investigated the relationships between energy-dependent endocytosis and the skin penetration of CIL-Ngel in this study. In addition, we evaluated whether the CIL-Ngel attenuated I/R-induced brain injury in a middle cerebral artery occlusion (MCAO)/reperfusion model mouse. The particle size of CIL was decreased using a bead mill, and the CIL particles (14.9 × 10¹⁴ particles/0.3 g) in the CIL-Ngel were approximately 50-180 nm. The release of CIL in the CIL-Ngel was higher than that in gel containing CIL powder (CIL-Mgel), and the CIL particles were released from the CIL-Ngel as nanoparticles. In addition, the percutaneous absorption of CIL from the CIL-Ngel was higher in comparison with that from CIL-Mgel, and clathrin-dependent endocytosis and caveolae-dependent endocytosis were related to the enhanced skin penetration of CIL-NPs. In the traditional (oral administration of CIL powder, 3 mg/kg) and transdermal administration (CIL-Ngel, 0.3 g) for 3 days (once a day), the area under the plasma CIL concentration-time curves (AUC) was similar, although the CIL supplied to the blood by the CIL-Ngel was more sustained than that via oral administration of CIL powder. Furthermore, the CIL-Ngel attenuated the ischemic stroke. In conclusion, we designed a gel using solid CIL-NPs, and we showed that the sustained release of CIL by CIL-Ngel provided an effective treatment for ischemic stroke in MCAO/reperfusion model mice. These findings induce the possibilities of developing novel applications of CIL solid nanoparticles.

Nanotechnology-based drug delivery systems in orthopedics

In recent years, nanotechnology has led to significant scientific and technological advances in diverse fields, specifically within the field of medicine. Owing to the revolutionary implications in drug delivery, nanotechnology-based drug delivery systems have gained an increasing research interest in the current medical field. A variety of nanomaterials with unique physical, chemical and biological properties have been engineered to develop new drug delivery systems for the local, sustained and targeted delivery of drugs with improved therapeutic efficiency and less or no toxicity, representing a very promising approach for the effective management of diseases. The utility of nanotechnology, particularly in the field of orthopedics, is a topic of extensive research. Nanotechnology has a great potential to revolutionize treatment, diagnostics, and research in the field of orthopedics. Nanophase drug delivery has shown great promise in their ability to deliver drugs at nanoscale for a variety of orthopedic applications. In this review, we discuss recent advances in the field of nanostructured drug delivery systems for orthopedic applications.

Recent advances in cyclization reactions of isatins or thioisatins via C–N or C–S bond cleavage

This review summarizes recent developments on cyclization reactions induced by the C–N or C–S bond cleavage of isatins or thioisatins in the last 5 years, which produce fused products instead of spiro compounds.

Water/pH dual responsive in situ calcium supplement collaborates simvastatin for osteoblast promotion mediated osteoporosis therapy via oral medication

Calcium supplement is the most commonly adopted treatment for osteoporosis but usually requires high dose and frequency. The modality of calcium supplement is therefore overlooked by current nanomedicine-based osteoporosis therapies without proper oral formulations. Herein, we proposed a tetracycline (Tc) modified and monostearin (MS) coated amorphous calcium carbonate (ACC) platform (TMA) as oral bone targeted and osteoporosis microenvironment (water/pH) responsive carrier for in situ calcium supplement. Moreover, current osteoporosis therapies also fall short of finding suitable molecular target and effective therapeutic regimen to further increase the therapeutic efficacy over available treatment means. As a result, the simvastatin (Sim) was loaded into TMA to construct drug delivery system (TMA/Sim) capable of synergistically activating the bone morphogenetic proteins (BMPs)-Smad pathway to provide a novel therapeutic regimen for osteoblast promotion mediated osteoporosis therapy. Our results revealed that optimized TMA showed high accessibility and oral availability with targeted drug delivery to bone tissue. Most importantly, benefit from the effective in situ calcium supplement and targeted Sim delivery, this therapeutic regime (TMA/Sim) achieved better synergetic effects than conventional combination strategies with promising osteoporosis reversion performance under low calcium dosage (1/10 of commercial calcium carbonate tablet) and significantly attenuated side effects.

Injectable Hydrogels as Three-Dimensional Network Reservoirs for Osteoporosis Treatment

Despite tremendous progresses made in the field of tissue engineering over the past several decades, it remains a significant challenge for the treatment of osteoporosis (OP) due to the lack of appropriate carriers to improve the bioavailability of therapeutic agents and the unavailability of artificial bone matrix with desired properties for the replacement of damaged bone regions. Encouragingly, the development of injectable hydrogels for the treatment of OP has attracted increasing attention in recent years because they can serve either as a reservoir for various therapeutic species or as a perfect filler for bone injuries with irregular shapes. However, the relationship between the complicated pathological mechanism of OP and the properties of diverse polymeric materials lacks elucidation, which clearly hampers the clinical application of injectable hydrogels for the efficient treatment of OP. To clarify this relationship, this article summarized both localized and systematic treatment of OP using an injectable hydrogel-based strategy. Specifically, the pathogenesis of OP and the limitations of current treatment approaches were first analyzed. We further focused on the use of hydrogels loaded with various therapeutic substances following a classification standard of the encapsulated cargoes for OP treatment with an emphasis on the application and precautions of each category. A concluding remark on existing challenges and future directions of this rapidly developing research area was finally made. Impact statement Effective osteoporosis (OP) treatment remains a significant challenge due substantially to the unavailability of appropriate drug carriers and artificial matrices with desired properties to promote bone repair and replace damaged regions. For this purpose, this review focused on the development of diverse injectable hydrogel systems for the delivery of various therapeutic agents, including drugs, stem cells, and nucleic acids, for effective increase in bone mass and favorable osteogenesis. The summarized important guidelines are believed to promote clinical development and translation of hydrogels for the efficient treatment of OP and OP-related bone damages toward improved life quality of millions of patients.

Hydrogel Formulations Incorporating Drug Nanocrystals Enhance the Therapeutic Effect of Rebamipide in a Hamster Model for Oral Mucositis

A mouthwash formulation of rebamipide (REB) is commonly used to treat oral mucositis; however, this formulation does not provide sufficient treatment or prevention in cases of serious oral mucositis. To improve treatment, we attempted to design a hydrogel incorporating REB nanocrystals (R-NPs gel). The R-NPs gel was prepared by a bead mill method using carbopol hydrogel, methylcellulose and 2-hydroxypropyl-β-cyclodextrin, and another hydrogel incorporating REB microcrystals (R-MPs gel) was prepared following the same protocol but without the bead mill treatment. The REB particle size in the R-MPs gel was 0.15–25 μm, and while the REB particle size was 50–180 nm in the R-NPs gel. Next, we investigated the therapeutic effect of REB nanocrystals on oral mucositis using a hamster model. Almost all of the REB was released as drug nanocrystals from the R-NPs gel, and the REB content in the cheek pouch of hamsters treated with R-NPs gel was significantly higher than that of hamsters treated with R-MPs gel. Further, treatment with REB hydrogels enhanced the healing of oral wounds in the hamsters. REB accumulation in the cheek pouch of hamsters treated with the R-NPs gel was prevented by an inhibitor of clathrin-dependent endocytosis (CME) (40 μM dynasore). In conclusion, we designed an R-NPs gel and found that REB nanocrystals are taken up by tissues through CME, where they provide a persistent effect resulting in an enhancement of oral wound healing.

Preparation and in vitro and in vivo Study of Asiaticoside-Loaded Nanoemulsions and Nanoemulsions-Based Gels for Transdermal Delivery

Purpose

Asiaticoside (ASI), a compound of triterpene pentacyclic saponins, has apparently therapeutic efficacy on human hypertrophic scar. However, the characteristics of large molecular weight, low water solubility and poor lipophilicity do not favor the diffusion through the stratum corneum (SC). Therefore, it is expected that the development of a transdermally delivered formulation may enhance the permeability ratio (Qn) of ASI for its clinical application. In this study, we designed asiaticoside-loaded nanoemulsions (ASI-NEs) and nanoemulsions-based gels (ASI-NBGs) and studied their mechanism for transdermal delivery.

Methods

The preparation of ASI-NEs was optimized by simplex lattice design (SLD). The ex vivo transdermal penetration and the in vivo pharmacokinetics studies were studied, respectively. The skin irritation of ASI-NEs and ASI-NBGs was measured on normal and damaged skin in rabbits, and the transcutaneous mechanisms of ASI-NEs and ASI-NBGs were determined by HE stained and confocal laser scanning microscopy (CLSM).

Results

The mean particle size of ASI-NEs was 132±5.84nm. The ex vivo skin permeation study verified that the Qn of the optimized ASI-NEs and ASI-NBGs was about 13.65 times and 5.05 times higher than that of the ordinary ASI-G group. In vivo, the pharmacokinetics studies showed that ASI-NEs and ASI-NBGs reached the peak value in the skin quickly and maintained stable release for a long time with high bioavailability. ASI-NEs and ASI-NBGs were proved to be safe when applied for topical skin usage, and they could play a therapeutic role through the skin mainly by acting on the microstructure of the SC and by means of the skin adnexal pathways.

Conclusion

ASI-NEs and ASI-NBGs were effectively developed to overcome the barrier properties of the skin and show high drug penetration through the transdermal route. In addition, we found that ASI-NEs and ASI-NBGs are safe when applied through transdermal delivery system.

Development of Sustained-Release Ophthalmic Formulation Based on Tranilast Solid Nanoparticles

Eye drops containing Tranilast (TL), N-(3,4-dimethoxycinnamoyl) anthramilic acid, are used as an anti-allergic conjunctivitis drug in the ophthalmic field. Traditional eye drops are very patient compliant, although the bioavailability (BA) of most eye drops is low since eye drops cannot be instilled beyond the capacity of the conjunctival sac due to its limited volume. Thus, traditional eye drops have low BA and a short duration of the drug on the ocular surface, so solutions to these problems are highly anticipated. In this study, we designed a sustained-release drug-delivery system (DDS) for TL nanoparticles. TL nanoparticles were prepared by bead mill treatment, and the gel formulations containing TL nanoparticles (TL-NPs-Gel, particle size 50 nm–100 nm) were provided by carboxypolymethylene. The crystal structure of TL with and without bead mill treatment is the same, but the TL solubility in formulations containing nanoparticles was 5.3-fold higher compared with gel formulations containing TL microparticles (TL-MPs-Gel). The photo and thermal stabilities of TL-NPs-Gel are also higher than those of dissolved TL. Moreover, when TL-NPs-Gel is applied to the upper eyelid skin (outside), the TL is released as nanoparticles, and delivered to the lacrimal fluid through the meibomian glands. In addition, the TL release profile for TL-NPs-Gel was sustained over 180 min after the treatment. These findings can be used to develop a sustained-release DDS in the ophthalmic field.

Invasome: A Novel Nanocarrier for Transdermal Drug Delivery

Invasomes are novel vesicular systems that exhibit improved transdermal penetration compared to conventional liposomes. These vesicles contain phospholipids, ethanol, and terpene in their structures; these components confer suitable transdermal penetration properties to the soft vesicles. The main advantages of these nanovesicles lie in their ability to increase the permeability of the drug into the skin and decrease absorption into the systemic circulation, thus, limiting the activity of various drugs within the skin layer. In this paper, several features of invasomes, including their structure, mechanism of penetration, applications, characterization, and potential advantages in dermal drug delivery, are highlighted. Overall, this review suggests that enhanced transdermal penetration of drugs using invasomes provides an appropriate opportunity for the development of lipid vesicular carriers.

Novel Sustained-Release Drug Delivery System for Dry Eye Therapy by Rebamipide Nanoparticles

The commercially available rebamipide ophthalmic suspension (CA-REB) was approved for clinical use in patients with dry eye; however, the residence time on the ocular surface for the traditional formulations is short, since the drug is removed from the ocular surface through the nasolacrimal duct. In this study, we designed a novel sustained-release drug delivery system (DDS) for dry eye therapy by rebamipide nanoparticles. The rebamipide solid nanoparticle-based ophthalmic formulation (REB-NPs) was prepared by a bead mill using additives (2-hydroxypropyl-β-cyclodextrin and methylcellulose) and a gel base (carbopol). The rebamipide particles formed are ellipsoid, with a particle size in the range of 40-200 nm. The rebamipide in the REB-NPs applied to eyelids was delivered into the lacrimal fluid through the meibomian glands, and sustained drug release was observed in comparison with CA-REB. Moreover, the REB-NPs increased the mucin levels in the lacrimal fluid and healed tear film breakup levels in an N-acetylcysteine-treated rabbit model. The information about this novel DDS route and creation of a nano-formulation can be used to design further studies aimed at therapy for dry eye.

The Intravitreal Injection of Lanosterol Nanoparticles Rescues Lens Structure Collapse at an Early Stage in Shumiya Cataract Rats

We designed an intravitreal injection formulation containing lanosterol nanoparticles (LAN-NPs) via the bead mill method and evaluated the therapeutic effect of LAN-NPs on lens structure collapse and opacification using two rat cataract models (SCR-N, rats with slight lens structure collapse; SCR-C, rats with the combination of a remarkable lens structure collapse and opacification). The particle size of lanosterol in the LAN-NPs was around 50–400 nm. A single injection of LAN-NPs (0.5%) supplied lanosterol into the lens for 48 h, and no irritation or muddiness was observed following repeated injections of LAN-NPs for 6 weeks (once every 2 days). Moreover, LAN-NPs repaired the slight collapse of the lens structure in SCR-N. Although the remarkable changes in the lens structure of SCR-C were not repaired by LAN-NP, the onset of opacification was delayed. In addition, the increase of cataract-related factors (Ca²⁺ contents, nitric oxide levels, lipid peroxidation and calpain activity levels) in the lenses of SCR-C was attenuated by the repeated injection of LAN-NPs. It is possible that a deficiency of lanosterol promotes the production of oxidative stress. In conclusion, it is difficult to improve serious structural collapse with posterior movement of the lens nucleus with a supplement of lanosterol via LAN-NPs. However, the intravitreal injection of LAN-NPs was found to repair the space and structural collapse in the early stages in the lenses.

Vitamin E TPGS based transferosomes augmented TAT as a promising delivery system for improved transdermal delivery of raloxifene

Raloxifene is commonly used for breast cancer protection. The low bioavailability of raloxifene (2%) is the result of its low solubility and intestinal glucuronidation. The nano-lipid carriers are characterized by small particle size, biocompatibility, and sustainable properties that improve cellular uptake of the loaded drug. The aim of this study was the improvement of raloxifene bioavailability by enhancing its solubility and cellular penetration through formulation of D-α-tocopheryl polyethylene glycol 1000 succinate based transferosomes and augmenting their effect with the cationic cell-penetrating peptide transactivator of transcription of the human immunodeficiency virus. Particle size, zeta potential, and transmission electron microscope investigation of the formed nanocarriers were carried out. Ex vivo raloxifene permeation through rat skin and cell viability studies was investigated. The results of D-α-tocopheryl polyethylene glycol 1000 succinate- transactivator of transcription of the human immunodeficiency virus transferosomes showed an average vesicle size of 96.05 nm with positively charged vesicles 39.4 mV of zeta potential value. The results revealed significant (p < 0.05) enhancement of raloxifene permeation from raloxifene transferosomes- loaded film when compared with raw raloxifene film. IC50 results showed significant improvement of formulated raloxifene cytotoxicity by 1.42-fold in comparison with raw raloxifene against MCF-7 cell lines. The developed raloxifene-transferosomes are considered promising nano-lipid carriers for the enhancement delivery of raloxifene.

Drug Delivery System Based On Minoxidil Nanoparticles Promotes Hair Growth In C57BL/6 Mice

Purpose

We designed formulations based on minoxidil (MXD) nanoparticles (N-MXD) and examined whether N-MXD can increase drug delivery into the follicles. In addition, we investigated the effect of N-MXD on hair growth in C57BL/6 mice.

Methods

N-MXD (1%) was prepared as follows: methylcellulose, p-hydroxyalkylbenzoates, mannitol, and MXD were dispersed in purified water and milled using zirconia beads under refrigeration (5500 rpm, 30 s×15 times, intermittent milling). C57BL/6 mice were used to evaluate hair-growth effects. The expression levels of mRNA and protein for vascular endothelial growth factor (VEGF) and insulin-like growth factor-1 (IGF-1) were determined by real-time PCR and ELISA methods, respectively.

Results

The ratio of solid-MXD was approximately 60% in N-MXD, and the MXD nanoparticles (90-300 nm) were oblong in shape. For the design of nanomedicines, usability is important. Therefore, we measured the stability and toxicity after N-MXD treatment. No agglutination of MXD nanoparticles was detected for 2 weeks, and no redness or MXD powder residue was observed in the skin after repetitive applications of N-MXD. Next, we evaluated hair-growth effects by N-MXD treatment. MXD contents in the skin tissue from N-MXD were lower than for commercially available MXD formulations (CA-MXD). Conversely, MXD contents in the hair bulbs were higher for N-MXD than for CA-MXD, and the drug efficacy of N-MXD was also higher than that of CA-MXD. In addition, the mRNA and protein levels of IGF-1 and VEGF were enhanced by the repetitive application of N-MXD and CA-MXD, and the enhanced IGF-1 and VEGF levels were significantly higher for N-MXD than for CA-MXD.

Conclusion

We designed a novel nanomedicine based on MXD nanoparticles and showed that N-MXD can deliver MXD into hair bulbs via hair follicles and that the therapeutic efficiency for hair growth is higher than for CA-MXD (solution type).

Combination with l-Menthol Enhances Transdermal Penetration of Indomethacin Solid Nanoparticles

This study designed the transdermal formulations containing indomethacin (IMC)—1% IMC was crushed with 0.5% methylcellulose and 5% 2-hydroxypropyl-β-cyclodextrin by the bead mill method, and the milled IMC was gelled with or without 2% l-menthol (a permeation enhancer) by Carbopol^® 934 (without menthol, N-IMC gel; with menthol, N-IMC/MT gel). In addition, the drug release, skin penetration and percutaneous absorption of the N-IMC/MT gel were investigated. The particle sizes of N-IMC gel were approximately 50–200 nm, and the combination with l-menthol did not affect the particle characterization of the transdermal formulations. In an in vitro experiment using a Franz diffusion cell, the skin penetration in N-IMC/MT gel was enhanced than the N-IMC gel, and the percutaneous absorption (AUC) from the N-IMC/MT gel was 2-fold higher than the N-IMC gel. On the other hand, the skin penetration from the N-IMC/MT gel was remarkably attenuated at a 4 °C condition, a temperature that inhibits all energy-dependent endocytosis. In conclusion, this study designed transdermal formulations containing IMC solid nanoparticles and l-menthol, and found that the combination with l-menthol enhanced the skin penetration of the IMC solid nanoparticles. In addition, the energy-dependency of the skin penetration of IMC solid nanoparticles was demonstrated. These findings suggest the utility of a transdermal drug delivery system to provide the easy application of solid nanoparticles (SNPs).

Essential Oils and Isolated Terpenes in Nanosystems Designed for Topical Administration: A Review

Essential oils are natural products with a complex composition. Terpenes are the most common class of chemical compounds present in essential oils. Terpenes and the essential oils containing them are widely used and investigated by their pharmacological properties and permeation-enhancing ability. However, many terpenes and essential oils are sensitive to environmental conditions, undergoing volatilization and chemical degradation. In order to overcome the chemical instability of some isolated terpenes and essential oils, the encapsulation of these compounds in nanostructured systems (polymeric, lipidic, or molecular complexes) has been employed. In addition, nanoencapsulation can be of interest for pharmaceutical applications due to its capacity to improve the bioavailability and allow the controlled release of drugs. Topical drug administration is a convenient and non-invasive administration route for both local and systemic drug delivery. The present review focuses on describing the current status of research concerning nanostructured delivery systems containing isolated terpenes and/or essential oils designed for topical administration and on discussing the use of terpenes and essential oils either for their biological activities or as permeation enhancers in pharmaceutic formulations.

Energy-Dependent Endocytosis is Involved in the Absorption of Indomethacin Nanoparticles in the Small Intestine

We previously reported that oral formulations containing indomethacin nanoparticles (IND-NPs) showed high bioavailability, and, consequently, improved therapeutic effects and reduced injury to the small intestine. However, the pathway for the transintestinal penetration of nanoparticles remained unclear. Thus, in this study, we investigated whether endocytosis was related to the penetration of IND-NPs (72.1 nm) using a transcell set with Caco-2 cells or rat intestine. Four inhibitors of various endocytosis pathways were used [nystatin, caveolae-dependent endocytosis (CavME); dynasore, clathrin-dependent endocytosis (CME); rottlerin, macropinocytosis; and cytochalasin D, phagocytosis inhibitor], and all energy-dependent endocytosis was inhibited at temperatures under 4 °C in this study. Although IND-NPs showed high transintestinal penetration, no particles were detected in the basolateral side. IND-NPs penetration was strongly prevented at temperatures under 4 °C. In experiments using pharmacological inhibitors, only CME inhibited penetration in the jejunum, while in the ileum, both CavME and CME significantly attenuated penetration. In conclusion, we found a novel pathway for the transintestinal penetration of drug nanoparticles. Our hypothesis was that nanoparticles would be taken up into the intestinal epithelium by endocytosis (CME in jejunum, CavME and CME in ileum), and dissolved and diffused in the intestine. Our findings are likely to be of significant use for the development of nanomedicines.