Ni(II) and Cu(II) removal from aqueous solution by a heavy metal-resistance bacterium: kinetic, isotherm and mechanism studies

Comparative metabolomic analysis reveals Ni(II) stress response mechanism of Comamonas testosteroni ZG2

The focus on the toxicity of nickel (Ni(II)) in animal and human cells has increased recently. Ni(II) contamination hazards to animals and humans can be reduced by bioremediation methods. However, one of the limitation of bioremediation bacteria in soil remediation is that they cannot survive in moderate and heavy contamination Ni(II)-contaminated environments. Therefore, the Ni(II) response mechanism of Comamonas testosteroni ZG2 which has soil remediation ability in high-concentration Ni(II) environment must be elucidated. The results demonstrated that the ZG2 strain can survive at 350 mg/L concentration of Ni(II), but the growth of ZG2 was completely inhibited under the concentration of 400 mg/L Ni(II) with significant alterations in the membrane morphology, adhesion behavior, and functional groups and serious membrane damage. Furthermore, the metabolic analysis showed that Ni(II) may affect the adhesion behavior and biofilm formation of the ZG2 strain by affecting the abundance of metabolites in amino acid biosynthesis, aminoacyl-tRNA biosynthesis, ABC transporter, and cofactor biosynthesis pathways, and inhibiting its growth. This study provides new evidence clarifying the response mechanism of Ni(II) stress in the ZG2 strain, thus playing a significant role in designing the strategies of bioremediation.

Kinetic process of the biosorption of Cu(II), Ni(II) and Cr(VI) by waste Pichia pastoris cells

Waste biomass of Pichia pastoris (P.pastoris) cells from the fermentation industry is an environmentally friendly biosorption material. The present study aimed to explore the biosorption behaviour of waste P.pastoris cells for Cu(II), Ni(II) and Cr(VI) in aqueous solution conditions. The results showed that the adsorption kinetics of three kinds of metals were well-fitted with lineared Elovich, pseudo-second-order kinetics models, non-linear kinetics and adsorption isotherms. The effective biosorption rates for Cu(II), Ni(II) and Cr(VI) removal were 71.3%, 59.7% and 16.25% respectively. The maximum Cu(II) adsorption capacity of waste P.pastoris was 40 mg/g at pH = 4 and 225 mg/L of solute concentration for 0.4 g biomass, better than that of the living yeasts. The pattern of Fourier transform infrared (FTIR) indicated that functional groups such as -NH, -OH, Si-O, P-O-C were involved in Cu(II) adsorption process. The analysis of SEM-EDS, XRD and TEM-EDS can be concluded that Cu(II) occupied Ca(II) binding sites by ion exchange mechanism to remove flocculation, and Cu(II) adsorbed onto the diatomite containing in the industrial waste P.pastoris. Thus the adsorption mechanism of the industrial waste P.pastoris was proposed taking Cu(II) as the example. And consecutive biosorption/desorption cycles were used for the evaluation of the regeneration efficiency, suggesting the good regeneration and reusability of waste P.pastoris.

Response mechanism of psychrotolerant Bacillus cereus D2 towards Ni (II) toxicity and involvement of amino acids in Ni (II) toxicity reduction

The toxic effect of Nickel (Ni (II)) on humans and animals has been previously addressed. Owing to the important application of psychrotolerant bacteria in Ni (II) damage remediation in contamination sites at low temperatures, the response mechanism of psychrotolerant bacteria to Ni (II) toxicity must be elucidated. Therefore, the effect of Ni (II) toxicity on a psychrotolerant Bacillus cereus D2 was studied, showing a way to alleviate the Ni (II) toxicity in strain D2. The results showed that strain D2 growth was completely inhibited at a concentration of 100 mg/L of Ni (II). The main effects of Ni (II) toxicity on strain D2 were membrane damage and reactive oxygen species-dependent oxidative stress. Additionally, Ni (II) toxicity resulted in dysregulation of the cell cycle in strain D2. Furthermore, metabolomic analysis showed that the biosynthesis of amino acids and ABC transporters were significantly affected, and the relative abundance of seven important amino acids changed in a concentration-dependent manner. Addition of 20 mM or 5 mM amino acids to 100 mg/L Ni (II)-treated strain D2 restored its growth. This study provides insights into the way to alleviate the Ni (II) toxicity in strain D2, thus contributing to the development of bioremediation strategies.

Ni(II), Cr(VI), Cu(II) and nitrate removal by the co-system of Pseudomonas hibiscicola strain L1 immobilized on peanut shell biochar

At present, the improvement of nitrate and mixed heavy metals removal in wastewater by microorganism are urgently needed. Previous studies have shown that Pseudomonas hibiscicola strain L1 exhibited Ni(II) removal ability under aerobic denitrification. In this study, the characteristics of the free strain L1, peanut shell biochar (PBC) and further the co-system of strain L1 immobilized on PBC were investigated for the removal of Ni(II), Cr(VI), Cu(II) and nitrate in mix-wastewater. The results illustrated that strain L1 could remove 15.51% - 32.55% of Ni(II) (20-100 mg·L^-1), and removal ratios by co-system were ranked as Ni(II) (81.17%) > Cu(II) (45.84%) > Cr(VI) (38.21%). Scanning Electron Microscope (SEM), X-ray Diffractometer (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) images indicated that the strain L1 immobilized well on PBC and had vigorous biological activity; the crystals of Ni(OH)₂, Cu(OH)₂ and CrO(OH) etc. were formed on surface of co-system with various functional groups participated in. In Sequential Batch Reactor (SBR), the pollutant removal ratios by co-system were higher than that by free strain L1. This study illustrated that the co-system of strain L1 immobilized on PBC was qualified to be applied for practical scenarios of effective heavy metal removal of electroplating mix-wastewater.

Study on the Bacterial Communities of the Biofilms on Titanium, Aluminum, and Copper Alloys at 5,772 m Undersea in Yap Trench

Biofilms formed on metal surfaces strongly affect metallic instruments serving in marine environments. However, due to sampling difficulty, less has been known about the bacterial communities of the biofilm on metallic surfaces in hadal environments, so the failure process of these deep-sea metallic instruments influenced by microbial communities could be hardly predicted. In this research, seven alloys, including titanium, aluminum, and copper alloys, were exposed in Yap Trench hadal environment for 1 year. Thus, the communities of the biofilms formed on metallic surfaces at 5,772 m undersea in Yap Trench were initially reported in previous studies. Then, 16S rRNA gene sequencing was performed to visualize the in situ bacterial communities of the biofilms formed on titanium, aluminum, and copper alloys at 5,772 m undersea in Yap Trench. It was found that Proteobacteria was the dominant phylum in all samples, but distinct genera were discovered on various alloys. The titanium alloy provided a suitable substrate for a mutualistic symbiotic biofilm with abundant bacterial richness. Aluminum alloys without copper components showed the least bacterial richness and formed a cold-adapted and oligotrophic-adapted biofilm containing the genera Sulfurimonas and PS1 Clade, while copper-present alloys showed relatively high bacterial richness with copper-resistant or even copper-utilizing biofilms constituting the genera Stenotrophomonas, Burkholderia-Caballeronia-Paraburkholderia, and Achromobacter on the surfaces. Furthermore, among all the element components contained in alloys investigated in this research, copper element showed the strongest influences on the composition and function of microbial communities in the biofilms formed on various metallic surfaces.

Characterization of the copper resistance mechanism and bioremediation potential of an Acinetobacter calcoaceticus strain isolated from copper mine sludge

Bioremediation is one of the most effective ways for removal of heavy metals and restoration of contaminated sites. This study investigated the copper (Cu) resistance mechanism and bioremediation potential of an Acinetobacter calcoaceticus strain KW3 isolated from sludge of Cu mine. The effect of Cu concentrations on the bacterial growth, biomass, and adsorption capacity, as well as the effect of contact time on the adsorption process was evaluated in a batch biosorption test. The strain exhibited strong tolerance of Cu, and the minimal inhibitory concentration was around 400 mg Cu²⁺ L^-1, at which the maximum adsorption capacity was 14.1 mg g^-1 dry cell mass. Cell walls and intracellular soluble components adsorbed 51.2% and 46.6% of Cu²⁺, respectively, suggesting that the strain not only adsorbed Cu²⁺ on the surface but also metastasized ions into cells. The adsorption and kinetic data were well fitted with Freundlich isotherm and Pseudo-second-order models, suggesting that cell surface had a high affinity for Cu²⁺ and the chemisorption could be the main adsorption mechanism. Scanning electron microscope and Fourier transform infrared spectroscopy analysis revealed that hydroxyl, carboxylic, amide, sulfate, and phosphate on cell walls might be involved in the biosorption process. Two-dimensional gel electrophoresis and MALDI-TOF/TOF mass spectrometry revealed that some oxidoreductases, in particular Cu resistance protein A (CopA) expression levels, were upregulated. Antioxidant defense and P_1B-type ATPases CopA efflux might play a crucial role in maintaining cellular homeostasis and intracellular detoxification. To our knowledge, this is the first time that Cu resistance mechanisms, especially intracellular enzymatic mechanisms, were identified in an A. calcoaceticus KW3 strain.

Highly effective removal of Cu(II) in aqueous solution by using mesoporous TiO2

Mesoporous TiO₂ has been prepared by a brief and simple sol-gel processing and applied for the removal of Cu(II) from aqueous solution. The adsorption behavior of mesoporous TiO₂ for Cu(II) was investigated using batch experiments. Results showed that the pseudo-second-order model and Langmuir isotherm were more accurate to describe the kinetics process and adsorption isotherm. Mesoporous TiO₂ adsorbent displayed excellent Cu(II) adsorption efficiency (195.52mg g^-1). The thermodynamic parameters showed that the adsorption was spontaneous and endothermic. It was also found that mesoporous TiO₂ could be used at least seven times without obvious loss of its original adsorption efficiency. Therefore, the obtained mesoporous TiO₂ could be employed as an effective and low-cost adsorbent for removal of Cu(II) from contaminated effluents.