Evaluation of a novel anti-biofouling microorganism (Bacillus sp. T5) for control of membrane biofouling and its effect on bacterial community structure in membrane bioreactors

Purification of Micro-Polluted Lake Water by Biofortification of Vertical Subsurface Flow Constructed Wetlands in Low-Temperature Season

In this study, a novel lab-scale biofortification-combination system (BCS) of Oenanthe javanica and Bacillus series was developed to improve the treatment ability of vertical subsurface flow constructed wetlands (VSFCW) at low temperatures (0–10 °C). The results showed that BCS-VSFCW overcame the adverse effects of low temperature and achieved the deep removal of nutrients. In addition, the removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), total nitrogen (TN), and total phosphorus (TP) by BCS-VSFCW were 38.65%, 28.20%, 18.82%, and 14.57% higher than those of blank control, respectively. During the experiment, Oenanthe javanica and low temperature tolerant Bacillus complemented each other in terms of microbial activity and plant uptake. Therefore, VSFCW combined with Oenanthe javanica and low temperature tolerant Bacillus has a promising future in low temperature (<10 °C) areas of northern China.

Mitigation of membrane biofouling in membrane bioreactor treating sewage by novel quorum quenching strain of Acinetobacter originating from a full-scale membrane bioreactor

A novel quorum quenching (QQ) strain, Acinetobacter guillouiae ST01, was isolated from a full-scale membrane bioreactor (MBR) and characterized for its QQ activities. Batch reactor studies at lab-scale showed that A. guillouiae ST01 exhibited higher QQ activity against acyl homoserine lactones (AHLs) with an oxo group compared to those without an oxo group. The organism was then inoculated (10%) in an MBR (Q-MBR) treating sewage over 48 days and was found to reduce quorum sensing (QS) activity by reducing AHL concentrations in the sludge and the biofilm of the Q-MBR. The concentration of polysaccharides was reduced up to 30% in both the biofilm and sludge relative to the control, whereas protein concentrations were reduced by 40% and 47% in the sludge and biofilm, respectively. The Q-MBR fouling rates were halved. These results indicate that A. guillouiae ST01 is a promising strain for biofouling reduction in MBR treating real wastewater.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Biofouling and me: My Stockholm syndrome with biofilms

Biofouling is the undesired deposition and growth of microorganisms on surfaces, forming biofilms. The definition is subjective and operational: not every biofilm causes biofouling - only if a given a subjective "threshold of interference" is exceeded, biofilms cause technical or medical problems. These range from the formation of slime layers on ship hulls or in pipelines, which increase friction resistance, to separation membranes, on which biofilms increase hydraulic resistance, to heat exchangers where they interfere with heat transport to contamination of treated water by eroded biofilm cells which may comprise hygienically relevant microorganisms, and, most dangerous, to biofilms on implants and catheters which can cause persistent infections. The largest fraction of anti-fouling research, usually in short-term experiments, is focused on prevention or limiting primary microbial adhesion. Intuitively, this appears only logical, but turns out mostly hopeless. This is because in technical systems with open access for microorganisms, all surfaces are colonized sooner or later which explains the very limited success of that research. As a result, the use of biocides remains the major tool to fight persistent biofilms. However, this is costly in terms of biocides, it stresses working materials, causes off-time and environmental damage and it usually leaves large parts of biofilms in place, ready for regrowth. In order to really solve biofouling problems, it is necessary to learn how to live with biofilms and mitigate their detrimental effects. This requires rather an integrated strategy than aiming to invent "one-shot" solutions. In this context, it helps to understand the biofilm way of life as a natural phenomenon. Biofilms are the oldest, most successful and most widely distributed form of life on earth, existing even in extreme environments and being highly resilient. Microorganisms in biofilms live in a self-produced matrix of extracellular polymeric substances (EPS) which allows them to develop emerging properties such as enhanced nutrient acquisition, synergistic microconsortia, enhanced tolerance to biocides and antibiotics, intense intercellular communication and cooperation. Transiently immobilized, biofilm organisms turn their matrix into an external digestion system by retaining complexed exoenzymes in the matrix. Biofilms grow even on traces of any biodegradable material, therefore, an effective anti-fouling strategy comprises to keep the system low in nutrients (good housekeeping), employing low-fouling, easy-to-clean surfaces, monitoring of biofilm development, allowing for early intervention, and acknowledging that cleaning can be more important than trying to kill biofilms, because cleaning does not cut the nutrient supply of survivors and dead biomass serves as an additional carbon source for "cannibalizing" survivors, supporting rapid after growth. An integrated concept is presented as the result of a long journey of the author through biofouling problems.

Natural Microbial Communities Can Be Manipulated by Artificially Constructed Biofilms

Biofouling proceeds in successive steps where the primary colonizers affect the phylogenetic and functional structure of a future microbial consortium. Using microbiologically influenced corrosion (MIC) as a study case, a novel approach for material surface protection is described, which does not prevent biofouling, but rather shapes the process of natural biofilm development to exclude MIC-related microorganisms. This approach interferes with the early steps of natural biofilm formation affecting how the community is finally developed. It is based on a multilayer artificial biofilm, composed of electrostatically modified bacterial cells, producing antimicrobial compounds, extracellular antimicrobial polyelectrolyte matrix, and a water-proof rubber elastomer barrier. The artificial biofilm is constructed layer-by-layer (LBL) by manipulating the electrostatic interactions between microbial cells and material surfaces. Field testing on standard steel coupons exposed in the sea for more than 30 days followed by laboratory analyses using molecular-biology tools demonstrate that the preapplied artificial biofilm affects the phylogenetic structure of the developing natural biofilm, reducing phylogenetic diversity and excluding MIC-related bacteria. This sustainable solution for material protection showcases the usefulness of artificially guiding microbial evolutionary processes via the electrostatic modification and controlled delivery of bacterial cells and extracellular matrix to the exposed material surfaces.

Anti-Biofouling Performance of an Immobilized Indigenous Quorum Quenching Bacterium Bacillus cereus HG10 and Its Influence on the Microbial Community in a Bioreactor

Quorum quenching-membrane bioreactors (QQ-MBRs) have been studied widely in recent decades. However, limited information is known about the influence of QQ on the microbial community. In this study, the indigenous QQ bacterium Bacillus cereus HG10 was immobilized and used to control biofouling in a bioreactor. QQ beads caused extracellular polymeric substance reduction and significantly hindered biofilm formation on a submerged membrane. Community profiling of 16S rRNA gene amplicons revealed that QQ beads dramatically altered the bacterial community structure in activated sludge but not in biofilm. Bacterial structure in the presence of QQ beads showed a clear divergence from that of the control groups at phylum, class, order, family, and genus taxonomic ranks. A significant enrichment of several bacterial genera, including Acinetobacter, Aeromonas, Delftia, Bacillus, and Pseudomonas, and depletion of over 12 bacterial genera were observed. These findings would contribute to a better understanding of why and how immobilized QQ bacteria impair membrane biofouling in QQ-MBRs.

Selection of quorum quenching (QQ) bacteria for membrane biofouling control: effect of different Gram-staining QQ bacteria, Bacillus sp. T5 and Delftia sp. T6, on microbial population in membrane bioreactors

This study aimed to address the gap in understanding how the microbial community present within quorum quenching-membrane bioreactor (QQ-MBRs) changes during the operations by investigating the behavior of two different types of QQ bacteria, Bacillus sp. T5 and Delftia sp. T6. The anti-biofouling effects of T5 and T6 in the QQ-MBR were 85% and 76%, respectively. According to the Illumina HiSeq results, when the QQ-MBR was operated with Gram-positive bacteria, T5, in the mixed liquor a reduction was observed in Gram-positive bacteria and Gram-negative bacteria population increased. In contrast, when the QQ-MBR was operated with Gram-negative bacteria, T6, Gram-negative bacteria population reduced and an increase in Gram-positive bacteria observed. As such, the outputs of the Illumina analysis revealed that use of Gram-negative QQ bacteria in the reactor induced a Gram-positive microbial community and vice versa. This indicates that a close interaction occurs between indigenous Gram-negative and positive bacterial phyla, and Bacillus sp. T5/Delftia sp. T6 is fundamental to the performance of MBRs. This is the first study demonstrating such a relationship and assistance selecting QQ bacteria/strategy in an effective way.

A Biocontrol Strain of Bacillus subtilis WXCDD105 Used to Control Tomato Botrytis cinerea and Cladosporium fulvum Cooke and Promote the Growth of Seedlings

In this study, a strain named WXCDD105, which has strong antagonistic effects on Botrytis cinerea and Cladosporium fulvum Cooke, was screened out from the rhizosphere of healthy tomato plants. The tomato plants had inhibition diameter zones of 5.00 mm during the dual culture for four days. Based on the morphological and physiological characteristics, the 16S rDNA sequence, and the gyrB gene sequence analysis, the strain WXCDD105 was identified as Bacillus subtilis suBap. subtilis. The results of the mycelial growth test showed that the sterile filtrate of the strain WXCDD105 could significantly inhibit mycelial growth of Botrytis cinerea and Cladosporium fulvum Cooke. The inhibition rates were 95.28 and 94.44%, respectively. The potting experiment showed that the strain WXCDD105 made effective the control of tomato gray mold and tomato leaf mold. The control efficiencies were 74.70 and 72.07%. The antagonistic test results showed that the strain WXCDD105 had different degrees of inhibition on 10 kinds of plant pathogenic fungi and the average inhibition rates were more than 80%. We also found that the strain WXCDD105 stimulated both the seed germination and seedling growth of tomatoes. Using the fermentation liquid of WXCDD105 (10⁸ cfu&middot;mL^&minus;1) to treat the seeds, the germination rate and radicle length were increased. Under the treatment of the fermentation liquid of the strain WXCDD105 (10⁶ cfu&middot;mL^&minus;1), nearly all physiological indexes of tomato seedlings were significantly higher than that of the control groups. This could not only keep the nutritional quality of tomato fruits but also prevent them from rotting. This study provided us with an excellent strain for biological control of tomato gray mold, tomato leaf mold, and tomato growth promotion. This also laid the technical foundation for its application.