Removal efficiency of hexavalent chromium from wastewater using starch-stabilized nanoscale zero-valent iron

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Preparation of Fe3O4@Fe(0) immobilized enzyme to enhance the efficient degradation of methoxychlor

The presence of methoxychlor (MXC) in soil and wastewater is considered a nonnegligible environmental threat. Herein, Fe₃O₄@Fe(0) was obtained by NaBH₄ reduction of Fe₃O₄ nanoparticles and served as a carrier for laccase to construct catalyst. The catalyst was evaluated for the degradation of MXC in treated wastewater and soil with 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) being used as cocatalyst. The removal rate of MXC in wastewater and soil was found to be 89% and 88% in optimum conditions, and the influences of initial MXC concentration, pH, and temperature on the degradation rate were evaluated. The metabolites including 2-methylpentane, 3-methylpentane, and n-pentane of MXC were identified, and possible degradation mechanisms were proposed. Overall, this work successfully demonstrates not only the ability to degrade MXC in different circumstances but also provides a new idea for environmental remediation in the future.

Iron-based materials for simultaneous removal of heavy metal(loid)s and emerging organic contaminants from the aquatic environment: Recent advances and perspectives

The existence of heavy metals and emerging organic contaminants in wastewater produces serious toxic residues to the environment. Developing cheap and efficient materials to remove these persistent pollutants is crucial. Iron-based materials are cost-effective and environmentally friendly catalysts, and their applications in the environmental field deserve attention. This paper critically reviewed the removal mechanisms of heavy metals and emerging organic pollutants by different influencing factors. The removal of pollutants (heavy metals and emerging organic pollutants) in a multi-component system was analyzed in detail. The mechanisms of synergism, antagonism and non-interference were discussed. This paper had a certain reference value for the research of wastewater remediation technology which could simultaneously remove various pollutants by iron-based materials.

Highly efficient nano-Fe/Cu bimetal-loaded mesoporous silica Fe/Cu-MCM-41 for the removal of Cr(VI): Kinetics, mechanism and performance

Zero valent iron (Fe⁰) can reduce Cr(VI) in water, where Fe⁰ and Fe(Ⅱ) are possible electron donors, but passivation and aggregation easily occur to Fe⁰. To improve the performance of Fe⁰, a new hybridization strategy of Fe/Cu bimetal and silica-based mesoporous molecular sieve MCM-41 for the removal of Cr(VI) from water has been proposed. The results show that the two-dimensional mesoporous structure of MCM-41 can provide skeleton support for Fe⁰, improve the mass transfer rate, and overcome the aggregation bottleneck of Fe⁰. The Cr(VI) removal rate reached 98.98% (pH = 2) after 40 min. The analytical results revealed Cr(VI) removal process: Cr(VI) adsorbed onto Fe/Cu-MCM-41 by electrostatic attraction and other molecular inter-atomic forces. The second metal, Cu, can inhibit the passivation of Fe⁰ and promote Fe(Ⅱ)through the formation of Fe/Cu battery, thereby promoting the electron transfer. The resulting Cr(Ⅲ) is precipitated as FeCr₂O₄ and Cr_xFe_1-x(OH)₃.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Cr(VI) reduction and adsorption by bimetallic nanoparticles from Li-ion batteries

In this work, bimetallic nanoparticles of cobalt and copper (NPLIB) were synthetized from obsolete Li-ion batteries cellphones and applied for the first time in the Cr(VI) removal. NPLIB has approximately 50 and 40% of Co and Cu content, respectively. The material is composed of Cu⁰ and Co⁰ but also presents metal oxides on its surface. The nanoparticles have spherical morphology and a high agglomeration capacity. The cobalt was better distributed on the surface, while copper was present in small scattered clusters. The NPLIB have an average diameter of 13.5 nm being confirmed the formation of the core-shell structure. The point of zero charge was calculated as 8.3. The NPLIB were used in the Cr(VI) removal process in aqueous solution, exhibiting a removal efficiency of ≈ 90% in 60 min of reaction. The kinetics study showed a mechanism consisting of two phases and better fit by pseudo-second-order model. The first phase is faster than the second. It is possible to observe peaks related to the oxidation of Co and Cu in the post reaction NPLIB by X-ray diffraction analysis, suggesting the modification of the material. Raman spectroscopy has shown that Cr(VI) is reduced to Cr(III) and remains bound to the surface of the nanoparticle, even after the desorption process, reducing its removal efficiency in new cycles. Graphical abstract.