Nano-emulgel: Emerging as a Smarter Topical Lipidic Emulsion-based Nanocarrier for Skin Healthcare Applications

Fabrication and characterization of transdermal delivery of ribociclib nanoemulgel in breast cancer treatment

The objective of this study is to create a nanoemulgel formulation of Ribociclib (RIBO), a highly selective inhibitor of CDK4/6 through the utilization of spontaneous emulsification method. An experimental investigation was conducted to construct pseudo-ternary phase diagram for the most favourable formulation utilizing rice bran oil, which is known for its diverse anticancer properties. The formulation consisted of varying combination of the surfactant and as the co-surfactant (Tween 80 and Transcutol, respectively) referred to as Smix and the trials were optimized to get the desired outcome. The nanoemulsion (NE) formulations that were developed exhibited a droplet size of 179.39 nm, accompanied with a PDI of 0.211. According to the data released by Opt-RIBO-NE, it can be inferred that the Higuchi model had the most favourable fit among many kinetics models considered. The results indicate that the use of nanogel preparations for the topical delivery of RIBO in breast cancer therapy, specifically RIBO-NE-G, is viable. This is supported by the extended release of the RIBO, and the appropriate level of drug permeation observed in Opt-RIBO-NE-G. Due to RIBO and Rice Bran oil, RIBO-NE-G had greater antioxidant activity, indicating its effectiveness as antioxidants. The stability of the RIBO-NE-G was observed over a period of three months, indicating a favourable shelf life. Therefore, this study proposes the utilization of an optimized formulation of RIBO-NE-G may enhance the efficacy of anticancer treatment and mitigate the occurrence of systemic side effects in breast cancer patients, as compared to the use of suspension preparation of RIBO.

Delivery of nano-emulgel carrier: optimization, evaluation and in vivo anti-inflammation estimations for osteoarthritis

Aim: Optimization and evaluation of Aceclofenac nanoemulgel for treatment for rheumatoid arthritis and reduction of GI irritation and enhancement of bioavaibility. Materials & methods: Different batches of emulgel and selected batch was proceeded for characterization like particle size, scanning electron microscopy, drug ingredient, in vitro release, Fourier transform infrared and x-ray diffraction in vitro inflammation and gel evaluation such as (spreadability, swelling index), ex vitro permeation, skin irritation and in vivo anti-inflammatory. Result: Emulgel showed nanometri size sustained release (79.96% in 6 h), compatibility and anti-inflammatory activity compared with pure drug. Concluded that emulgels had better (nearly twice as good) anti-inflammatory action as the commercial product. Conclusion: Compared with the commercial gel, the emulgel's anti-inflammatory effect had a quicker onset and a longer duration of action.

Association effect of the phytocannabinoid beta-caryophyllene and indomethacin carried in topical nanoemulgels: an evaluation by in vivo anti-inflammatory model

The sesquiterpene β-caryophyllene, classified as a phytocannabinoid compound, has been widely studied owing to its multi-target action. In addition, this compound has demonstrated application as a skin permeation promoter. In this context, this study aimed to evaluate the feasibility of associating β-caryophyllene and indomethacin in the oily core of hydrogel thickened nanoemulsions, as well as, to evaluate the in vivo anti-inflammatory effect of this association by croton oil ear edoema induced model. After topical application, the nanoemulgels resulted in increased edoema mass when compared to the substances in their free form. Overall, the results differed from expected, and the data found may be owing to the specificities of the in vivo model applied, as well as the tested ratio between β-caryophyllene and indomethacin (200:1). New perspectives arise from the data found regarding the evaluation of the association of terpenic compounds with indomethacin in nanoemulsified systems.

Novel Therapeutic Hybrid Systems Using Hydrogels and Nanotechnology: A Focus on Nanoemulgels for the Treatment of Skin Diseases

Topical and transdermal drug delivery are advantageous administration routes, especially when treating diseases and conditions with a skin etiology. Nevertheless, conventional dosage forms often lead to low therapeutic efficacy, safety issues, and patient noncompliance. To tackle these issues, novel topical and transdermal platforms involving nanotechnology have been developed. This review focuses on the latest advances regarding the development of nanoemulgels for skin application, encapsulating a wide variety of molecules, including already marketed drugs (miconazole, ketoconazole, fusidic acid, imiquimod, meloxicam), repurposed marketed drugs (atorvastatin, omeprazole, leflunomide), natural-derived compounds (eucalyptol, naringenin, thymoquinone, curcumin, chrysin, brucine, capsaicin), and other synthetic molecules (ebselen, tocotrienols, retinyl palmitate), for wound healing, skin and skin appendage infections, skin inflammatory diseases, skin cancer, neuropathy, or anti-aging purposes. Developed formulations revealed adequate droplet size, PDI, viscosity, spreadability, pH, stability, drug release, and drug permeation and/or retention capacity, having more advantageous characteristics than current marketed formulations. In vitro and/or in vivo studies established the safety and efficacy of the developed formulations, confirming their therapeutic potential, and making them promising platforms for the replacement of current therapies, or as possible adjuvant treatments, which might someday effectively reach the market to help fight highly incident skin or systemic diseases and conditions.

Structured Emulgels by Interfacial Assembly of Terpenes and Nanochitin

Interfacial assemblies formed by colloidal complexation are effective in multiphase stabilization, as shown in structured liquids and Pickering emulgels. Herein, we demonstrate a type of biobased colloidal system that spontaneously stabilizes an organic phase in a continuous hydrogel phase. Specifically, a triterpene extracted from bark (betulin, BE) is added to an organic phase containing a coniferous resin (rosin acid, a diterpene). BE is shown to take part in strong noncovalent interactions with the nanochitin dispersed in the aqueous (hydrogel) phase, leading to a complex of high interfacial activity. The viscoelastic response of the system is rationalized by the presence of a superstable structured dual network. When used as a templating material, the emulgel develops into structured liquids and cryogels. The herein introduced all-biobased type of nanoparticle surfactant system forms a gel ("emulsion-filled" with "aggregated droplets") that features the functional benefits of both betulin and nanochitin.

Microemulsions, nanoemulsions and emulgels as carriers for antifungal antibiotics

According to estimates, up to 25% of the world's population has fungal skin diseases, making them the most prevalent infectious disease. Several chemical classes of antifungal drugs are available to treat fungal infections. However, the major challenges of conventional formulations of antifungal drugs include poor pharmacokinetic profiles like solubility, low permeability, side effects and decreased efficacy. Novel drug delivery is a promising approach for overcoming pharmacokinetic limitations and increasing the effectiveness of antibiotics. In this review, we have shed light on microemulsions, nanoemulsions, and emulgels as novel drug delivery approaches for the topical delivery of antifungal antibiotics. We believe these formulations have potential translational value and could be developed for treating fungal infections in humans.

Natural Oils Enhance the Topical Delivery of Ketoconazole by Nanoemulgel for Fungal Infections

Nanoemulgel (NEG) pharmaceutical formulations are gaining popularity because of their ability to serve both as a nanoemulsion and as a gel. These products are well-known for their ease of use, spreadability, controlled release, and ability to hydrate dry skin. Natural essential oils have been shown to promote the cutaneous permeability of topical formulations, enhancing medication safety and efficacy. Herein, we developed NEG for the enhanced permeation of ketoconazole against candidiasis using clove oil (clove-oil-NEG) or eucalyptus oil (eucalyptus-oil-NEG), using the gelling agents carbopol 943 and hydroxypropyl methylcellulose (HPMC). We tested various excipients to increase the solubility of ketoconazole and formulate a nanoemulsion (NE). We measured the NE droplet particle size, shape, entrapment efficiency, and drug release. Furthermore, the physicochemical properties of the optimized nanoemulsion formulation were characterized by techniques such as Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) analysis. The NEs were loaded into gels to form NEGs. NEGs were characterized for drug content, homogeneity, rheology, spreadability, and antifungal activity against Candida albicans, both in vitro and in vivo. Optimized ketoconazole NEG preparations consisted of either 15% clove oil or 20% eucalyptus oil. Droplet sizes in the optimized NEs were <100 nm, and the polydispersity indexes were 0.24 and 0.26. The percentages of ketoconazole released after 24 h from the clove-oil-NEG and eucalyptus-oil-NEGs were 91 ± 4.5 and 89 ± 7%, respectively. Scanning electron microscopy (SEM) showed that the NEGs had a smooth, uniform, and consistent shape and internal structural organization. The drug contents in the clove-oil-NEG and eucalyptus-oil-NEG were 98.5 ± 2.2 and 98.8 ± 3.4%, respectively. Permeation values of ketoconazole from clove-oil-NEG and eucalyptus-oil-NEG were 117 ± 7 and 108.34 ± 6 μg cm-2, respectively. The ketoconazole NEG formulations also had higher levels of fungal growth inhibition than a marketed formulation. Finally, in vivo studies showed that the NEGs do not irritate the skin. Ketoconazole NEG with either 15% clove oil or 20% eucalyptus oil is stable with better efficacy than ketoconazole alone due to excellent dispersion, drug dissolution, and permeability and thus might be recommended for the effective and safe treatment of candidiasis.

Emulgels: Promising Carrier Systems for Food Ingredients and Drugs

Novel delivery systems for cosmetics, drugs, and food ingredients are of great scientific and industrial interest due to their ability to incorporate and protect active substances, thus improving their selectivity, bioavailability, and efficacy. Emulgels are emerging carrier systems that represent a mixture of emulsion and gel, which are particularly significant for the delivery of hydrophobic substances. However, the proper selection of main constituents determines the stability and efficacy of emulgels. Emulgels are dual-controlled release systems, where the oil phase is utilized as a carrier for hydrophobic substances and it determines the occlusive and sensory properties of the product. The emulsifiers are used to promote emulsification during production and to ensure emulsion stability. The choice of emulsifying agents is based on their capacity to emulsify, their toxicity, and their route of administration. Generally, gelling agents are used to increase the consistency of formulation and improve sensory properties by making these systems thixotropic. The gelling agents also impact the release of active substances from the formulation and stability of the system. Therefore, the aim of this review is to gain new insights into emulgel formulations, including the components selection, methods of preparation, and characterization, which are based on recent advances in research studies.

An Overview of Nanoemulgels for Bioavailability Enhancement in Inflammatory Conditions via Topical Delivery

The anti-inflammatory drugs that are generally available possess the disadvantage of hydrophobicity, which leads to poor permeability and erratic bioavailability. Nanoemulgels (NEGs) are novel drug delivery systems that aim to improve the solubility and permeability of drugs across the biological membrane. The nano-sized droplets in the nanoemulsion enhance the permeation of the formulation, along with surfactants and co-surfactants that act as permeation enhancers and can further improve permeability. The hydrogel component of NEG helps to increase the viscosity and spreadability of the formulation, making it ideal for topical application. Moreover, oils that have anti-inflammatory properties, such as eucalyptus oil, emu oil and clove oil, are used as oil phases in the preparation of the nanoemulsion, which shows a synergistic effect with active moiety and enhances its overall therapeutic profile. This leads to the creation of hydrophobic drugs that possess enhanced pharmacokinetic and pharmacodynamic properties, and simultaneously avoid systemic side effects in individuals with external inflammatory disorders. The nanoemulsion's effective spreadability, ease of application, non-invasive administration, and subsequent ability to achieve patient compliance make it more suitable for topical application in the combat of many inflammatory disorders, such as dermatitis, psoriasis, rheumatoid arthritis, osteoarthritis and so on. Although the large-scale practical application of NEG is limited due to problems regarding its scalability and thermodynamic instability, which arise from the use of high-energy approaches during the production of the nanoemulsion, these can be resolved by the advancement of an alternative nanoemulsification technique. Considering the potential advantages and long-term benefits of NEGs, the authors of this paper have compiled a review that elaborates the potential significance of utilizing nanoemulgels in a topical delivery system for anti-inflammatory drugs.

Qbd-Based Approach to Optimize Niosomal Gel of Levosulpiride for Transdermal Drug Delivery

Poor aqueous solubility besides extensive hepatic first effect significantly decreases the oral absorption of levosulpiride, which in turn minimizes its therapeutic effectiveness. Niosomes have been extensively investigated as a transdermal vesicular nanocarrier to increase the delivery of low permeable compounds into and across the skin. This research work was to design, develop and optimize levosulpiride-loaded niosomal gel and to evaluate its prospects for transdermal delivery. The Box-Behnken design was used to optimize niosomes by analyzing the impact of three factors (cholesterol; X1, Span 40; X2, and sonication time; X3) on the responses (particle size, Y1, and entrapment efficiency, Y2). Optimized formulation (NC) was incorporated into gel and evaluated for pharmaceutical properties, drug release study, ex vivo permeation, and in vivo absorption. The design experiment data suggest that all three independent variables influence both response variables significantly (p < 0.01). Pharmaceutical characteristics of NC vesicles showed the absence of drug excipient interaction, nanosize (~102.2 nm), narrow distribution (~0.218), adequate zeta potential (−49.9 mV), and spherical shape, which are suitable for transdermal therapy. The levosulpiride release rates varied significantly (p < 0.01) between niosomal gel formulation and control. Greater flux (p < 0.01) was observed with levosulpiride-loaded niosomal gel than with control gel formulation. Indeed, the drug plasma profile of niosomal gel was significantly higher (p < 0.005), with ~3 folds higher Cmax and greater bioavailability (~500% higher; p < 0.0001) than its counterpart. Overall, these findings imply that the use of an optimized niosomal gel formulation can increase the therapeutic efficacy of levosulpiride and may represent a promising alternative to conventional therapy.

Nanoemulgel: A Novel Nano Carrier as a Tool for Topical Drug Delivery

Nano-emulgel is an emerging drug delivery system intended to enhance the therapeutic profile of lipophilic drugs. Lipophilic formulations have a variety of limitations, which includes poor solubility, unpredictable absorption, and low oral bioavailability. Nano-emulgel, an amalgamated preparation of different systems aims to deal with these limitations. The novel system prepared by the incorporation of nano-emulsion into gel improves stability and enables drug delivery for both immediate and controlled release. The focus on nano-emulgel has also increased due to its ability to achieve targeted delivery, ease of application, absence of gastrointestinal degradation or the first pass metabolism, and safety profile. This review focuses on the formulation components of nano-emulgel for topical drug delivery, pharmacokinetics and safety profiles.

Influence of nanoemulsion/gum ratio on droplet size distribution, rheology and physical stability of nanoemulgels containing inulin and omega-3 fatty acids

BACKGROUND

New consumer habits are forcing the food industry to develop new and healthy products. In response to this tendency, in this investigation, we obtained nanoemulgels by microfluidization containing inulin fibre and omega-3 fatty acids. First, the influence of the number of microfluidization cycles on the physical properties of the nanoemulsions was studied. Subsequently, an advanced-performance xanthan gum was added to the nanoemulsion in different nanoemulsion/xanthan ratios (1:1, 2:1, 3:1, 4:1, 1:2, and 1:3).

RESULTS

Laser diffraction, multiple light scattering, and rheology techniques were used to characterize nanoemulsions and the corresponding nanoemulgels. The nanoemulsion with the lowest Sauter mean diameter (138 nm) and the longest physical stability was obtained after three passes through a microfluidization device at a fixed pressure of 103 421 kPa. Thus, these processing conditions were always used to obtain the nanoemulsion; these were subsequently mixed with a xanthan gum solution to produce nanoemulgels that showed weak gel-like viscoelastic and shear-thinning flow behaviours. A decrease in the nanoemulsion/xanthan ratio (i.e. by an increase in the content of xanthan gum in the nanoemulgel) increased the viscoelastic moduli and the zero shear viscosity values. A rise in the droplet size was observed with aging time, probably due to flocculation. The nanoemulsion/xanthan gum mass ratio of 1:3 yielded the most stable nanoemulgel.

CONCLUSIONS

This work is a contribution to the development of functional foods. It has been demonstrated that it is possible to obtain a stable nanoemulgel-based food matrix containing fibre and omega-3 fatty acids. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Nanogels as Potential Delivery Vehicles in Improving the Therapeutic Efficacy of Phytopharmaceuticals

Nanogel is a promising drug delivery approach to improve the pharmacokinetics and pharmacodynamic prospect of phytopharmaceuticals. In the present review, phytopharmaceuticals with astonishing therapeutic utilities are being explored. However, their in vivo delivery is challenging, owing to poor biopharmaceutical attributes that impact their drug release profile, skin penetration, and the reach of optimal therapeutic concentrations to the target site. Nanogel and its advanced version in the form of nanoemulgel (oil-in-water nanoemulsion integrated gel matrix) offer better therapeutic prospects than other conventional counterparts for improving the biopharmaceutical attributes and thus therapeutic efficacy of phytopharmaceuticals. Nanoemulgel-loaded phytopharmaceuticals could substantially improve permeation behavior across skin barriers, subsequently enhancing the delivery and therapeutic effectiveness of the bioactive compound. Furthermore, the thixotropic characteristics of polymeric hydrogel utilized in the fabrication of nanogel/nanoemulgel-based drug delivery systems have also imparted improvements in the biopharmaceutical attributes of loaded phytopharmaceuticals. This formulation approach is about to be rife in the coming decades. Thus, the current review throws light on the recent studies demonstrating the role of nanogels in enhancing the delivery of bioactive compounds for treating various disease conditions and the challenges faced in their clinical translation.

Supramolecular Tools to Improve Wound Healing and Antioxidant Properties of Abietic Acid: Biocompatible Microemulsions and Emulgels

Abietic acid, a naturally occurring fir resin compound, that exhibits anti-inflammatory and wound-healing properties, was formulated into biocompatible emulgels based on stable microemulsions with the addition of a carbamate-containing surfactant and Carbopol^® 940 gel. Various microemulsion and emulgel formulations were tested for antioxidant and wound-healing properties. The chemiluminescence method has shown that all compositions containing abietic acid have a high antioxidant activity. Using Strat-M^® skin-modelling membrane, it was found out that emulgels significantly prolong the release of abietic acid. On Wistar rats, it was shown that microemulsions and emulgels containing 0.5% wt. of abietic acid promote the rapid healing of an incised wound and twofold tissue reinforcement compared to the untreated group, as documented by tensiometric wound suture-rupture assay. The high healing-efficiency is associated with a combination of antibacterial activity of the formulation components and the anti-inflammatory action of abietic acid.

Nanoemulsion-Based Hydrogels and Organogels Containing Propolis and Dexpanthenol: Preparation, Characterization, and Comparative Evaluation of Stability, Antimicrobial, and Cytotoxic Properties

Recently, nanoemulsion-based gels have become very popular for dermal drug delivery, overcoming the disadvantages of conventional semi-solid drug forms. The aim of this study is to prepare and characterize nanoemulsion-based hydrogels and organogels containing combined propolis and dexpanthenol, and to compare their stability, antimicrobial, and cytotoxicity properties. Within the scope of characterization studies, organoleptic properties, drug content, morphology, pH, gel-sol conversion temperature, spreadability, viscosity, FT-IR, and release properties were evaluated in hydrogels and organogels. The characterization studies carried out were subjected to short-term stability evaluation at room temperature and refrigerator for 3 months. While no phase separation was observed in any of the formulations kept in the refrigerator, phase separation was observed in four formulations kept at room temperature. The release study successfully obtained an extended release for propolis and dexpanthenol. In the antimicrobial susceptibility study, Hydrogel 1 showed activity against S. aureus, while Organogel 1 showed activity against both S. aureus and S. epidermidis. In the cytotoxicity study against HDFa cells, both Hydrogel 1 and Organogel 1 were found to be nontoxic at low doses. These hydrogels and organogels, which contain propolis and dexpanthenol in combination for the first time, are promising systems that can be used in wound and burn models in the future.

An Update on Photodynamic Therapy of Psoriasis—Current Strategies and Nanotechnology as a Future Perspective

Psoriasis (PS) is an immune-mediated skin disease with substantial negative effects on patient quality of life. Despite significant progress in the development of novel treatment options over the past few decades, a high percentage of patients with psoriasis remain undertreated and require new medications with superior long-term efficacy and safety. One of the most promising treatment options against psoriatic lesions is a form of phototherapy known as photodynamic therapy (PDT), which involves either the systemic or local application of a cell-targeting photosensitizing compound, followed by selective illumination of the lesion with visible light. However, the effectiveness of clinically incorporated photosensitizers in psoriasis treatment is limited, and adverse effects such as pain or burning sensations are frequently reported. In this study, we performed a literature review and attempted to provide a pooled estimate of the efficacy and short-term safety of targeted PDT in the treatment of psoriasis. Despite some encouraging results, PDT remains clinically underutilized. This highlights the need for further studies that will aim to evaluate the efficacy of a wider spectrum of photosensitizers and the potential of nanotechnology in psoriasis treatment.

Nanoceria laden decellularized extracellular matrix-based curcumin releasing nanoemulgel system for full-thickness wound healing

Decellularized extracellular matrix (ECM) has been widely used for wound healing. But, ECM failed to integrate tissue and restore the tissue function properly, when elevated levels of free radicals and biofilm formation occur at the wound site. Here, nanoemulgel systems were fabricated, considering the combinatorial approach of nanotechnology (nanoceria and curcumin nanoemulsion) and ECM gel of goat small intestine submucosa. The curcumin was encapsulated in the nanoemulgel system to enhance bioavailability in terms of antibacterial, antioxidant, sustained release and permeation at the wound site. Nanoceria was also incorporated to enhance the antibacterial, antioxidant and wound healing properties of the fabricated nanoemulgel formulation. All the formulations were porous, hydrophilic, biodegradable, antioxidant, antibacterial, hemocompatible, biocompatible, and showed enhanced wound healing rate. The formulation (DG-SIS/Ce/NC) showed the highest free radicals scavenging capacity and antibacterial property with prolonged curcumin release (62.9% in 96 h), skin permeability (79.7% in 96 h); showed better cell growth under normal and oxidative-stressed conditions: it also showed full-thickness wound contraction (97.33% in 14 days) with highest collagen synthesis at the wound site (1.61 μg/mg in 14 days). The outcomes of this study suggested that the formulation (DG-SIS/Ce/NC) can be a potential nanoemulgel system for full-thickness wound healing application.

Emerging trends and promises of nanoemulsions in therapeutics of infectious diseases

Infectious diseases are prevalent and have contributed to high morbidity rates by creating havoc like the COVID-19, 1918 influenza and Black Death (the plague) pandemics. Antimicrobial resistance, adverse effects, the emergence of co-infections and the high cost of antimicrobial therapies are major threats to the health of people worldwide while impacting overall healthcare and socioeconomic development. One of the most common ways to address this issue lies in improving existing antimicrobial drug-delivery systems. Nanoemulsions and their modified forms have been successfully employed for the delivery of antimicrobials to treat infectious diseases. In this article, the authors comprehensively reviewed how nanoemulsion-based formulation systems are shifting the paradigm for therapeutics and diagnosis of infectious diseases.

Repurposing Lovastatin Cytotoxicity against the Tongue Carcinoma HSC3 Cell Line Using a Eucalyptus Oil-Based Nanoemulgel Carrier

Tongue cancer is one of the most common carcinomas of the head and neck region. The antitumor activities of statins, including lovastatin (LV), and the essential oil of eucalyptus (Eu oil), have been adequately reported. The aim of this study was to develop a nanoemulgel containing LV combined with Eu oil that could then be made into a nanoemulsion and assessed to determine its cytotoxicity against the cell line human chondrosarcoma-3 (HSC3) of carcinoma of the tongue. An I-optimal coordinate-exchange quadratic mixture design was adopted to optimize the investigated nanoemulsions. The droplet size and stability index of the developed formulations were measured to show characteristics of the nanoemulsions. The optimized LV loaded self-nanoemulsifying drug delivery system (LV-Eu-SNEDDS) was loaded into the gelling agent Carbopol 934 to develop the nanoemulgel and evaluated for its rheological properties. The cytotoxic efficiency of the optimized LV-Eu-SNEDDS loaded nanoemulgel was tested for cell viability, and the caspase-3 enzyme test was used against the HSC3 cell line of squamous carcinoma of the tongue. The optimized nanoemulsion had a droplet size of 85 nm and a stability index of 93%. The manufactured nanoemulgel loaded with the optimum LV-Eu-SNEDDS exhibited pseudoplastic flow with thixotropic behavior. The developed optimum LV-Eu-SNEDDS-loaded nanoemulgel had the best half-maximal inhibitory concentration (IC₅₀) and caspase-3 enzyme values of the formulations developed for this study, and these features improved the ability of the nanoemulsion-loaded gel to deliver the drug to the investigated target cells. In addition, the in vitro cell viability studies revealed the synergistic effect between LV and Eu oil in the treatment of tongue cancer. These findings illustrated that the LV-Eu-SNEDDS-loaded gel formulation could be beneficial in the local treatment of tongue cancer.

Skin wound healing promoted by novel curcumin-loaded micelle hydrogel

Background

The development of biomaterials with the ability to promote skin wound healing is an important topic in the field of biomedical science. In this study, a topical curcumin (Cur) gel [Cur/hyaluronic acid (HA)] was prepared by combining curcumin-loaded PCL-b-PEG-b-PCL (PECE) nanomicelles (PCEC/Cur) and HA to effectively promote skin wound healing. Continuous drug release from PCEC/Cur can provide long-term protection and treatment of skin wounds.

Methods

The study was completed in two stages. The first stage (in vitro): PCEC/Cur were prepared by thin film hydration method. The second stage (in vivo): 36 anesthetized rats were used to prepare a round full-thickness skin defect wound with a diameter of 23 mm on the dorsal side of the spine, and the rats were randomly divided into 4 groups with 9 rats in each group.

Results

The results showed that wounds in the Cur/HA group were restored to normal after 14 days after operation, representing 96%±3% wound healing. Hematoxylin and eosin (HE) staining showed that hair follicles in the Cur/HA group were visible and that the re-epithelialization time was earlier. Masson staining showed that Cur/HA promoted the formation of collagen fibers. Immunohistochemical observation showed that angiogenesis and subsequent healing of the wound surface was enhanced in the Cur/HA group.

Conclusions

The injectable hyaluronic acid gel complex Cur/HA is a promising candidate material for a wound dressing to promote healing.

Development of a novel nanoemulgel formulation containing cumin essential oil as skin permeation enhancer

Essential oils have been proposed as promising non-toxic transdermal permeation enhancers. Their use is limited because of their low water solubility. The use of nanotechnology-based strategies is one of the ways to overcome this limitation. This study aimed to explore the transdermal permeation enhancing capability of cumin essential oil in nanoemulgel systems containing diclofenac sodium. Cumin essential oil nanoemulsion was produced by high-pressure homogenization technique. The formulation was optimized by changing HLB values in a range of 9.65–16.7 using different surfactant mixtures, namely, Tween 20, Tween 80, and Span 80. Preparations were characterized by polydispersity index, droplet size, and zeta potential. Nanoemulsion with concentrations of 2 and 4% essential oil was incorporated into 0.75% Carbopol gel matrix to make nanoemulgel formulation, and its permeation enhancing effect was performed through Franz diffusion cells. Antinociceptive activities of the formulations were measured in thermal (tail-flick) and chemical (formalin) models of nociception in mice. Characterization exhibited that at HLB value of 9.65, the smallest particle size (82.20 ± 5.82 nm) was formed. By increasing the essential oil percentage in the nanoemulgel from 1 to 2%, the permeation of diclofenac increased from 28.39 ± 1.23 to 34.75 ± 1.07 µg/cm² at 24 h. The value of permeation from the simple gel (21.18 ± 2.51 µg/cm²) and the marketed product (22.97 ± 1.92 µg/cm²) was lower than the formulations containing essential oil. Nanoemulgel of diclofenac containing essential oil showed stronger antinociceptive effects in formalin and tail-flick tests than simple diclofenac gel and marketed formulation. In conclusion, the study proved that nanoemulgel formulation containing cumin essential oil could be considered as a promising skin enhancer to enhance the therapeutic effect of drugs.

Tackling the various classes of nano-therapeutics employed in topical therapy of psoriasis

Psoriasis is a dermatological chronic skin condition with underlying autoimmune etiology. It deeply affects patients' quality of life. Therefore, it was an interesting target for researchers throughout the past years. Conventionally, the treatment options include anti-inflammatory agents, immune suppressants, biologic treatment, and phototherapy. Nanotechnology offers promising characteristics that allow for tailoring a drug carrier to achieve dermal targeting, improved efficacy and minimize undesirable effects. Being the safest route, the first line of treatment and a targeted approach, we solely discussed the use of the topical route, combined with advanced drug delivery systems for the management of psoriasis in this article. Advanced systems include polymeric, metallic, lipidic and hybrid nanocarriers incorporating different active agents. All formerly mentioned types of drug delivery systems were investigated through the past decades for the purpose of topical application on psoriatic plaques. Scientists' efforts are promising to reach an optimized formula with a convenient dosage form to improve efficacy, safety, and compliance for the treatment of psoriasis. Accordingly, it will offer a better quality of life for patients.