A Comparative Evaluation of Dissolution Rate of Three Different Posterior Restorative Materials used in Pediatric Dentistry: An In Vitro Study

Aim

The study aimed to compare and assess the dissolution rate, color stability, and other mechanical parameters, such as compressive and flexural strength, of three distinct posterior restorative materials used in pediatric dentistry.

Materials and methods

The three posterior restorative materials used in pediatric dentistry are divided into group I-Zirconomer, group II-Composite, and group III-Cention N. Around 111 cylindrical specimens were grouped into three groups of 37 each. According to the manufacturer's standards, all materials were proportioned and handled. The materials were thermocycler in a chewing simulator and were subjected to various tests to estimate the dissolution rate, compressive strength, flexural strength, and color stability of the three individual groups.

Results

The dissolution rate was highest in Zirconomer, followed by Cention N and Composite, which were highly significant (p = 0.05). Compressive strength was highest with Cention N, followed by Composite and Zirconomer, which was highly important (p = 0.05). Cention N had the greatest flexural strength, followed by Composite and Zirconomer, which were highly significant (p = 0.05). Finally, the Composite had the highest color stability, followed by Cention N and Zirconomer among the three groups.

Conclusion

It is concluded that resin-based restorative materials outperform glass ionomer-based Zirconomer cement in terms of dissolution rate, compressive strength, flexural strength, and color stability.

Clinical significance

Because of the widespread improvement in dental materials, many dental restorative types of cement have emerged on the market. The features of good restorative materials are mechanical strength, fluid dissolution rate, and retention.

How to cite this article

Raman V, Srinivasan D, AR SE, et al. A Comparative Evaluation of Dissolution Rate of Three Different Posterior Restorative Materials used in Pediatric Dentistry: An In Vitro Study. Int J Clin Pediatr Dent 2023;16(S-1):S20-S26.

The effects of amalgam contamination and different surface modifications on microleakage of dentin bonded to bulk fill composite when using different adhesive protocols

BACKGROUND

To evaluate the effect of amalgam contamination, different surface treatments, and adhesive protocols on dentin microleakage to bulk-fill composite resin material.

METHODS

Forty teeth were fixed in (polyvinyl siloxane) PVS molds, and the Class II cavities were placed on mesial and distal aspects. Thirty teeth were restored by amalgam and thermocycled to 10,000 cycles (5 and 55 °C, 30-s dwell time). The rest were restored with Filtek one Bulk Fill composite without amalgam predecessor. Samples were divided into: G1 (dentin pretreated with 2% chlorhexidine gluconate), G2 (0.5 mm of dentin was removed), G3 (no surface modification), and G4 (control, where composite was bonded to sound dentin without amalgam predecessor.). Single Bond Universal Adhesive system was used to bond the composite material, by using the etch-and-rinse protocol in the mesial cavity preparation and self-etch protocol in the distal. Specimens underwent thermocycling for 5000 cycles, then embedded in silver nitrate and sectioned for stereomicroscope examination. Descriptive statistics, Mann-Whitney U test, and Kruskal-Wallis test were used to analyze the results at p < 0.05.

RESULTS

The highest microleakage score values (4.00) were found in the G2, and G4 in etch-and-rinse protocol. While the lowest scores were found in G2 when using self-etching protocol (1.5). Lower microleakage values were associated with the chlorhexidine treatment group for both adhesive protocols. No significant differences were found between amalgam contaminated and non-contaminated groups.

CONCLUSIONS

Amalgam contamination did not affect microleakage. Self-etching adhesive protocol significantly reduced microleakage for all groups irrespective of the surface treatment. Chlorhexidine pretreatment improved microleakage for both adhesive protocols but had no significant effect.

Antimicrobial properties of dental cements modified with zein-coated magnesium oxide nanoparticles

The aim of this study was to test the antimicrobial properties of dental cements modified with magnesium oxide (MgO) nanoparticles. Zein-modified MgO nanoparticles (zMgO) in concentrations (0.0, 0.3, 0.5, and 1.0%) were mixed with dental cements (Fuji II, Rely X Temp E, Ionoglass Cem, Es Temp NE, and System P link). Eight discs were fabricated from each zMgO-cement pair for a total of 32 specimens for each cement. Characterization of the dental cements incorporating zMgO was done by X-ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM). The antimicrobial properties of the mixtures were tested using direct contact and agar diffusion assays against Streptococcus mutans, Staphylococcus aureus, Enterococcus faecalis, and Candida albicans. Data was analyzed using two-way analysis of variance and LSD post hoc test at 0.05 significance level. XRD spectra showed sharp peaks of zMgO indicating its high crystalline nature, while the amorphous dental cements with zMgO had broad peaks. FESEM analysis showed a uniform distribution of the zMgO nanoparticles in the cement. There were significant inhibition zone values associated with all concentrations of zMgO-cement mixtures tested compared to controls (p < 0.001) with a dose-response recorded only with Fuji II. Optical density values were significantly lower in zMgO groups compared to controls for all microorganisms. The effect was most prominent with Rely X against C. albicans and S. aureus. Dental cements containing zMgO showed significant antimicrobial properties that were dependent on the specific initial cement substrate.

•

Antimicrobial nanoparticles (NPs) are widely used in dental materials to improve their biological properties.

•

Magnesium Oxide (MgO) NPs are novel antimicrobial agents.

•

Incorporation of MgO NPs in dental cements aids in minimizing bacterial colonization at the restoration margin.

•

Zein polymer facilitates the dispersion of MgO NPs and avoid its agglomeration.

•

Zein polymer effectively enhances the performance of MgO NPs.

Impact of various pressures on fracture resistance and microleakage of amalgam and composite restorations

BACKGROUND

Pressure changes can influence dental restorations especially among divers. The aim of the current study was to evaluate the fracture resistance and microleakage of mesio-occluso-distal (MOD) amalgam and composite restorations undergoing pressure changes via diving and aviation simulation.

METHODS

For the fracture resistance test, 60 sound maxillary premolar teeth were randomly allocated to two groups. Each group was then divided into three subgroups (n = 10) for simulating scuba-diving (pressure cycle to 203 kPa, 2 bar), flight (50.6 kPa, 0.5 bar), and control (atmospheric pressure). The teeth underwent pressure cycles for one month and then the fracture resistance test was conducted on them using the Instron testing machine. Microleakage scores were afterwards recorded by using a 2% methylene blue dye for 24 hours.

RESULTS

Composite restorations showed significantly higher fracture resistance values compared to the amalgam group (P < 0.05). The control group had significantly higher fracture resistance values compared to the dive group, whereas there was no significant difference between the control group and the flight group (P = 0.083). No significant difference in the level of microleakage was observed between restoration materials or pressure cycles (P > 0.05).

CONCLUSIONS

Composite restorations showed better fracture resistance compared to the amalgam group. However, diving pressure cycles demonstrated adverse effects on the fracture resistance values of both restorative materials.

The effects of pressure in vitro on three methods of root canal obturation

INTRODUCTION

The seal of root canal fillings depends on the anatomy of the root canal system and on the properties of filling materials and their bond to the walls of the root canal. Alterations in pressure may influence these properties. The current study investigated and compared microleakage in a tapered single-cone method versus lateral and vertical condensation after diving simulation.

METHODS

One hundred and thirty five extracted single-rooted teeth were used. Following instrumentation and irrigation to #30.06 Mtwo rotary system, obturations were performed in three groups of 45 teeth: Group 1, tapered single-cone with Endoseal MTA sealer; Group 2, lateral condensation with AH26 sealer; Group 3, vertical condensation with AH26 sealer. Then all specimens were divided into three groups and incubated at ambient room pressure (101.3 kPa), 203 kPa or 304 kPa for 120 minutes respectively 20 times over one month to simulate diving conditions. Microleakage quantitative analysis was recorded by using a 2% Methylene blue dye for 24 hours.

RESULTS

The amounts of microleakage increased with increasing pressure in all obturation groups; however, the differences were not statistically significant (P > 0.05). At all three pressures, the least microleakage was recorded in Group 3, vertical condensation. Although the differences between vertical condensation, lateral condensation, and tapered single-cone methods were statistically significant (P < 0.001), the vertical condensation and lateral condensation groups did not differ from each other (P > 0.05).

CONCLUSIONS

Vertical condensation may be the best technique, based on sealing ability, for people who frequently experience pressure alterations.

Effect of a hyperbaric environment (diving conditions) on adhesive restorations: an in vitro study

Objectives No recent study has addressed the effect of diving conditions (pressure increase) on adhesive restorations. We evaluated the impact of a simulated hyperbaric environment on microleakage of the dentine-composite resin interface. The ultimate aim was to propose recommendations for restorative dentistry for patients who are divers to limit barodontalgia (dental pain caused by pressure variations of the environment) and may lead to dangerous sequelae.Methods We bonded 20 dentine disks by using an adhesive system (Scothbond Universal) to ten intact composite cylinders and ten composite cylinders with porosity (Ceram X mono). For each group, the samples were divided into two subgroups, one submitted to a simulated hyperbaric environment and the other to an ambient environment. All samples were immersed in a silver nitrate solution to evaluate microleakage at the interface after analysis with a camera.Results Dye percolation for groups in the hyperbaric environment was greater than groups in ambient environment. For each subgroup, dye percolation was greater for samples with than without porosity.Conclusions High percolation percentages demonstrate that our simulated hyperbaric condition led to loss of sealing at the dentine-composite resin interface, especially with porous composites.Clinical significance Respect of the protocol and the quality of condensation for adhesive restorations are important in all clinical situations, especially for patients who are divers. A more interventionist approach must be adopted with these patients.

Influence of Hand Instrumentation and Ultrasonic Scaling on the Microleakage of various Cervical Restorations: An in vitro Study

INTRODUCTION

In cervical lesions, various restorative materials can be inserted, which can be affected by the application of periodontal scalers. This study evaluated and compared the marginal seal of class V glass ionomer, composite resin, and amalgam restorations after subjecting them to hand instrumentation and ultrasonic scaling.

MATERIALS AND METHODS

In this experimental study, 30 sound human first premolars were selected. In each tooth, buccal and lingual cavities (4 mm mesiodistal width, 3 mm occlusogingival height, and 2 mm depth) were made. The teeth were randomly assigned to three groups of 10 teeth: (1) Glass ionomer group, (2) composite group, and (3) amalgam group. Teeth were subjected to thermocycling procedure for 1,000 cycles between 5 and 55°C water baths and a 1-minute dwell time. Then, each group was randomly subdivided: (1) Margins of 30 restorations were exposed to hand instrumentation procedures by applying 10 working strokes, (2) margins of 30 restorations were exposed to a periodontal tip mounted on a piezoelectric ultrasonic handpiece working at 25 kHz for 10 seconds. The specimens were serially sectioned mesiodistally. Each section was examined under a stereomicroscope. The extent of microleakage was ranked using a 0 to 4 scale at both occlusal and cervical margins of the restorations. Data were analyzed initially using the Kruskal-Wallis test, followed by multiple comparisons using the Mann-Whitney and Wilcoxon test.

RESULTS

The type of restorative material had a significant influence on dye penetration, whether in the enamel margin or in the dentinal margin (p < 0.001). The microleakage of glass ionomer group was the highest. No statistical differences were found in dye penetration between scaling groups (hand instrumentation and ultrasonic scaling) (p > 0.05).

CONCLUSION

Type of restorative material had a significant influence on microleakage. No statistical differences were found in dye penetration between scaling groups.

CLINICAL SIGNIFICANCE

The microleakage of glass ionomer restoration is greater than amalgam and composite restorations after subjecting them to hand instrumentation and ultrasonic scaling.

Comparing marginal microleakage of three different dental materials in veneer restoration using a stereomicroscope: an in vitro study

Objectives:

The objectives were to evaluate the degree of dye penetration of three different dental materials as esthetic veneer restorations on anterior teeth using stereomicroscope, and to provide reference for clinical choice.

Materials and Methods:

Sixty freshly extracted human maxillary central incisors were selected and randomly divided into three main groups of 20 each. Respectively, the teeth were prepared for veneer restoration by fiber-reinforced composite (FRC) (Everstick NET, Stick Tech), porcelain laminate veneer (PLV) (IPS Empress II(E-Max Press)) and 3M composites (3M ESPE) bonding with G-Cem resin cement (GC). After exposed to thermocycling (500cycles per day (5–55 °C, intervals: 30 s)) and immersed in 2% basic fuchsin dye solution for 24 h, the specimens were then sectioned buccolingual into three halves in a vertical plane parallel and measured dye penetration using stereomicroscope (Zeiss). The data collected was recorded by the dye penetration index (0–5) and statistically analysed using one-way analysis of variance (ANOVA) and T-tests using SPSS 13.

Results:

It is evident that the FRC group showed the lowest mean score of 0.333 mm, and the PLV group showed a highest mean score of 0.749 mm, as compared with the FRC group and the 3M composites group. Overall, when the three groups were compared for microleakage using ANOVA, there was significant difference among the groups.

Conclusions:

To evaluate the dye penetration of microleakage, the FRC showed a better marginal adaptability for veneer restoration. Therefore, within the limitation of this study, the use of FRC as veneer on anterior teeth can be suggested.

Composite Replacement of Amalgam Restoration Versus Freshly Cut Dentin: An In Vitro Microleakage Comparison

OBJECTIVE

The aim of this study was to evaluate the microleakage of the composite restorations when bonded to tooth structure previously restored with amalgam material compared with that of freshly cut dentin.

METHODS AND MATERIALS

Thirty intact, extracted intact human molars were mounted in autopolymerizing acrylic resin. Class II box preparations were prepared on the occluso-proximal surfaces of each tooth (4-mm bucco-lingual width and 2-mm mesio-distal depth) with the gingival cavosurface margin 1 mm above the CEJ. Each cavity was then restored using high copper amalgam restoration (Disperalloy, Dentsply) and then thermocycled for 10,000 thermal cycles. Twenty-five of the amalgam restorations were then carefully removed and replaced with Filtek Supreme Ultra Universal (3M ESPE); the remaining five were used for scanning electron microscopy and energy dispersive x-ray spectroscopy analysis. A preparation of the same dimensions was performed on the opposite surface of the tooth and restored with composite resin and thermocycled for 5000 thermal cycles. Twenty samples were randomly selected for dye penetration testing using silver nitrate staining to detect the microleakage. The specimens were analyzed with a stereomicroscope at a magnification of 20×. All of the measurements were done in micrometers; two readings were taken for each cavity at the occlusal and proximal margins. Two measurements were taken using a 0-3 scale and the percentage measurements.

RESULTS

Corrosion products were not detected in either group (fresh cut dentin and teeth previously restored with amalgam). No statistically significant difference was found between the microleakage of the two groups using a 0-3 scale at the occlusal margins (McNemar test, p=0.727) or proximal margins (Wilcoxon signed-rank test, p=0.174). No significance difference was found between the two groups using the percentage measurements and a Wilcoxon signed-rank test at either the occlusal (p=0.675) or proximal (p=0.513) margins. However, marginal microleakage was statistically significant between the proximal and occlusal margins (p<0.001).

CONCLUSION

Within the limitations of this in vitro study, no significant difference was found between the microleakage of nondiscolored dentin in teeth that were previously restored with amalgam compared with freshly cut dentin. However, marginal microleakage in the proximal surface was higher than that in the occlusal surface.

An in vitro Evaluation of Microleakage of Posterior Teeth Restored with Amalgam, Composite and Zirconomer - A Stereomicroscopic Study

BACKGROUND

Numerous restorative materials are being used in dentistry to achieve adequate strength and restore aesthetics. However, a perfect ideal restorative material has still eluded dentist. Dental amalgam is versatile material with self-sealing property, but is unaesthetic. Other restorative materials like, composites require conservative preparation, but exhibits polymerisation shrinkage resulting in microleakage. To overcome these drawbacks a high strength restorative material reinforced with ceramic and zirconia fillers known as zirconomer has been introduced. The aim of this study was to evaluate the micro-leakage of these three different restorative materials.

MATERIALS AND METHODS

Thirty non-carious human permanent first and second molars were utilized in this study. Class I cavities were prepared on the occlusal surface; cavities were then restored with amalgam, composite and zirconomer as per manufacture's instruction. All samples were stored for 24 hours in distilled water followed by thermocycling. The entire tooth surface was painted with two coats of varnish to within 1mm of the restoration margins. The teeth were immersed in dye. Teeth were sectioned and observed under stereomicroscope.

RESULTS

In this study the zirconomer exhibited the highest micro leakage as compared to composite and amalgam but composite having higher micro leakage as compared to amalgam and lower micro leakage as compared to zirconomer.

CONCLUSION

Even though composite and amalgam are being marketed aggressively and new material like zirconomer are on origin, amalgam still proves to be one of the best materials.

Is apical periodontitis in root filled teeth associated with the type of restoration?

OBJECTIVE

To study the association between type of restoration and apical periodontitis (AP) in root filled teeth.

MATERIALS AND METHODS

The present study used data from surveys conducted in 1983, 1993 and 2003. In 1983, 130 randomly selected subjects aged 3-80 years in the city of Jönköping, Sweden, were invited for a clinical and radiological examination. The study was repeated in 1993 and 2003. New participants were, thus, recruited with the same sampling criteria and sample size in the same geographical area in 1993 and 2003, respectively. In the present study, only dentate individuals aged 20-70 years with ≥1 root filled tooth were included, yielding a sample of 788 subjects with 2634 root filled teeth. Apical periodontitis on the tooth level was the dependent variable. Periapical status was assessed according to Periapical Index (PAI). Independent variables were root filling quality, recurrent caries, type of restoration, number of teeth with apical periodontitis, age and gender. Root fillings appearing homogenous and ending within 2 mm from radiographic apex were regarded as adequate, otherwise inadequate. All radiographs were re-studied by one observer regarding periapical status and root filling quality. Risk was analyzed by means of a GEE model.

RESULTS

Type of restoration, root filling quality, number of teeth with apical periodontitis within the individual and age were found to be predictors of AP in root filled teeth. Presence of recurrent caries and gender were not found to be associated with AP.

CONCLUSIONS

According to the present study, root filling quality and type of restoration may be predictive of AP in root filled teeth.