Material Tissue Interaction--From Toxicity to Tissue Regeneration

Evaluation of the Cytocompatibility of Fluoride Varnish and Its Effect on Human Gingival Fibroblasts (hGFs): An In Vitro Study

Introduction Untreated dental decay poses a significant oral health challenge, leading to pain, tooth loss, and infections. Fluoride varnishes are in prolonged contact with the tooth surface and this prevents dental decay. However, limited research has been conducted regarding the cytotoxicity and cytocompatibility of varnishes on oral cells. Recent studies have shed light on the cytotoxic effect of these varnishes on human fibroblast cells. Material and Methods The fibroblasts were isolated and cultured in 0.00001, 0.0001, 0.001, 0.01, 0.1, and 1 % fluoride concentration The cells were incubated for 72 hours at a temperature of 37°C and cell viability after the application of varnish was assessed using 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyl tetrazolium bromide (MTT) assay. Results This study observed that fluoride varnish had a concentration dependant cytotoxic effect on human gingival fibroblasts (hGFs). As the concentration of fluoride increased, the cell viability decreased. At 1% concentration, there was maximum cell cytotoxicity. At the lowest concentration (0.00001), more than 78% of the cells were found to be viable. Conclusion Further research is necessary to develop safer and more biocompatible fluoride varnish formulations to ensure their efficacy in preventing dental caries without causing harm to oral tissues.

Cytotoxicity of 3D printed resin materials for temporary restorations on human periodontal ligament (PDL-hTERT) cells

OBJECTIVES

Various dental resin materials are available for the fabrication of temporary restorations using modern additive printing methods. Albeit these materials are placed for several months in intimate contact with dental hard and soft tissues, including the gingival crevice, there exists only insufficient evidence on the biocompatibility of these materials. This in vitro study aimed to delineate the biocompatibility of 3D printable materials on periodontal ligament cells (PDL-hTERTs).

METHODS

Samples of four dental resin materials for additive fabrication of temporary restorations using 3D printing (MFH, Nextdent; GC Temp, GC; Freeprint temp, Detax; 3Delta temp, Deltamed), one material for subtractive fabrication (Grandio disc, Voco) and one conventional temporary material (Luxatemp, DMG) were prepared with a standardized size according to the manufacturer's instructions. Human PDL-hTERTs were exposed to resin specimens or eluates of the material for 1, 2, 3, 6 and 9 days. For determination of cell viability, XTT assays were performed. In addition, the expression of the proinflammatory cytokines interleukin 6 and 8 (IL-6 and 8) was assessed in the supernatants with ELISA. Cell viability and the expression of IL-6 and 8 in presence of the resin material or their eluates was compared with untreated controls. Immunofluorescence staining for IL-6 and IL-8, as well as scanning electron microscopy of the discs after culturing, were performed. Differences between groups were analyzed with Student´s t-test for unpaired samples.

RESULTS

Compared to untreated control samples, the exposure against the resin specimen induced strong reduction of cell viability in case of the conventional material Luxatemp (p < 0.001) and the additive material 3Delta temp (p < 0.001) irrespective of the observation period. On the contrary, the presence of eluates of the various materials induced only minor changes in cell viability. Considering IL-6 (day 2: p = 0.001; day 6 and 9: p < 0.001) and IL-8 (day 1: p = 0.001; day 2, 3, 6, 9: p < 0.001) their expression was strongly reduced in presence of the eluate of Luxatemp. Except for IL-6 at day 1 and 6 also the material 3Delta temp caused significant reduction of both proinflammatory mediators at any time point.

SIGNIFICANCE

The conventional material Luxatemp and the additive material 3Delta temp appear to severely affect cell viability when in direct contact with PDL-hTERTs. The other tested materials of this new category of additive materials and the subtractive material Grandio seem to induce only minor changes in direct contact with these cells. Therefore, they could serve as a viable alternative in the fabrication of temporary restorations.

Are Endodontic Solvents Cytotoxic? An In Vitro Study on Human Periodontal Ligament Stem Cells

The aim of this study was to assess the influence of eucalyptol, chloroform, and Endosolv on the proliferative capability, cell viability, and migration rates of human periodontal ligament stem cells (hPDLSCs) in vitro. Solvent eluates were formulated following ISO 10993-5 guidelines, and 1%, 0.25%, and 0.1% dilutions were prepared. The HPDLSCs were isolated from the extracted third molars of healthy donors. The following parameters were assessed: cell viability via trypan blue and IC50 assays, cell migration via horizontal wound healing assay, cell morphology via cell cytoskeleton staining (phalloidin labeling), and cell oxidative stress via reactive oxygen species assay. The data were analyzed using one-way ANOVA and Tukey’s posthoc tests, and their significance was established at p < 0.05. Chloroform and eucalyptol exhibited significantly higher cytotoxicity on the hPDLSCs in vitro compared to the control group, as shown by the cell viability, migration, morphology, and reactive oxygen species release assays. Alternatively, Endosolv showed adequate cytotoxicity levels comparable to those of the control group. The cytotoxicity of the tested endodontic solvents increased in a dose-dependent manner. The results from the present study highlight the cytotoxicity of chloroform and eucalyptol. Thus, their limited and cautious use is recommended, avoiding solvent extrusion.

Effects of resin materials dedicated for additive manufacturing of temporary dental restorations on human gingival keratinocytes

OBJECTIVE

This study investigated the effect of eluates of conventional and 3D-printed resin materials for manufacturing temporary dental restorations on gingival keratinocytes.

METHODS

Three-dimensional (3D)-printed resin materials: 3Delta temp (Deltamed), NextDent MFH (Nextdent), Freeprint temp (Detax), GC temp (GC), were compared to Grandio disc (Voco) and Luxatemp (DMG). Human gingival keratinocytes (IHGKs) were exposed to eluates of the materials and XTT assays were performed at 24 h, 48 h, 72 h, or 144 h. For quantification of the proinflammatory response, the protein amount of IL-6 and 8 was determined in the supernatants using ELISA. One-way ANOVA with post hoc analysis was used to compare differences in cell viability and IL-6 and IL-8 levels between groups.

RESULTS

At 24 h, and more remarkably at 48 h, a significant decrease in cell viability occurred for the 3D-printed materials compared to the untreated IHGKs, but also compared to Grandio disc and Luxatemp. Except for the expression of IL-8 in presence of the eluate of Grandio disc at 24 and 48 h, all tested materials caused attenuation of IL-6 and 8 from IHGKs for any observation period.

CONCLUSIONS

The materials for additive manufacturing affect cell proliferation differently than the subtractive manufactured material Grandio disc and the conventional material Luxatemp.

CLINICAL SIGNIFICANCE

In comparison to conventional and subtractive manufactured restorations, 3D printed temporary restorations might induce more negative effects on the gingival and probably also on pulpal health since viability and the proinflammatory response of oral keratinocytes are more intensively affected by these materials.

In Vitro Biocompatibility of CPP-ACP and Fluoride-containing Desensitizers on Human Gingival Cells

OBJECTIVES

To analyze the biocompatibility of different desensitizers containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride in their composition: MI Varnish (MV), Clinpro White Varnish (3M Oral Care), Profluorid Varnish (VOCO), Duraphat (Colgate) and Embrace Varnish (Pulpdent) on human gingival fibroblast cells (hGF).

METHODS AND MATERIALS

Human gingival fibroblast (hGF) cells were exposed to several desensitizer extracts at different concentrations (0.1%, 1%, and 4% eluates). Then, in vitro biocompatibility was studied by analyzing the IC50 value, cell proliferation (MTT assay and cell cycle), cell migration (wound healing assay), cell morphology and F-actin content (immunocytofluorescence), and induction of apoptosis/necrosis (flow cytometry). Data were analyzed by one-way analysis of variance (ANOVA) followed by Tukey test.

RESULTS

The lowest cell viability and IC50 were observed in all concentrations of Embrace Varnish-treated hGFs (p<0.001), whereas the highest were exhibited by those treated with Clinpro White Varnish. Similar effects were evidenced when induction of apoptosis/necrosis and cell migration assays were assessed. Finally, MI Varnish, Profluorid Varnish, Duraphat, and Embrace Varnish extracts showed lower numbers of attached cells, some of them with an unusual fibroblastic morphology when cultured with 4% concentration of the varnishes, while Clinpro White Varnish exhibited a similar number of cells with an evident actin cytoskeleton compared to the control group.

CONCLUSIONS

The results obtained in this study indicate that hGFs show better in vitro biocompatibility after exposure to Clinpro White Varnish, even at the highest concentration employed, making it the most eligible for topical applications. In contrast, Embrace Varnish exhibited a high cytotoxicity towards hGFs that could potentially delay the healing process and regeneration of the oral mucosa, although more studies are needed to confirm this hypothesis.

Topical fluoride varnishes promote several biological responses on human gingival cells

OBJECTIVE

To compare the in vitro cytotoxicity of four commercial topical fluoride varnishes widely used in daily dental practice for the prevention of caries on human fibroblasts: Cervitec F, Fixofluor, Fluor Protector S and Duraphat.

MATERIAL AND METHODS

Human gingival fibroblasts (hGF) were exposed to different concentrations of fluoride varnishes extracts. Biological assays, including MTT and IC50 value determination, annexin-V/7-AAD staining, cell migration and F-actin staining with phalloidin were carried out. Statistical analyses were performed using one-way ANOVA and Tukey's post hoc test.

RESULTS

At 4% concentration, all of the fluoride varnishes extracts affected fibroblasts metabolic activity, exhibiting a high degree of cytotoxicity at all measured time points. At 0.1% and 1%, Duraphat and Fixofluor or Fluor Protector S and Cervitec F exerted the lowest or highest cytotoxic effects, respectively. Similar effects were evidenced when induction of apoptosis/necrosis and cell migration assays were analyzed. Immunocytochemical assays revealed a similar number of fibroblasts, without changes in the morphology and F-actin content at 0.1% concentration of all tested materials, while at 1% concentration, Fluor Protector S and Cervitec F showed few cells with aberrant morphology or non-adhered cells, respectively.

CONCLUSIONS

Different commercial topical fluoride varnishes with the same therapeutic indication may exhibit different biological effects and cytotoxicity on fibroblasts.

Biophysical and Fluoride Release Properties of a Resin Modified Glass Ionomer Cement Enriched with Bioactive Glasses

The aim of this study was to evaluate the bond strength, microleakage, cytotoxicity, cell migration and fluoride ion release over time from a resin-modified glass-ionomer cement (RMGIC) enriched with bioactive glasses (BAGs) and a nanohybrid restorative polymer resin agent used as adhesion material in the cemented brackets. One hundred and twenty bovine lower incisors were divided into three groups: (Transbond Plus Self Etching Primer (TSEP)/Transbond XT (TXT), TSEP/ACTIVA, orthophosphoric acid gel/ACTIVA) and brackets were bonded. A bond strength test and microleakage test were applied. A fluoride release test was applied after 60 days for the TXT and ACTIVA group. To evaluate cytotoxicity and cell migration, a cell viability and scratch migration assay were done for each group. p values < 0.05 were considered significant. Regarding bond strength and microleakage test, no significant differences were found between TSEP/TXT and TSEP/ACTIVA. At 6.4 pH, ACTIVA showed a higher degree of fluoride ion release, which increased with acid pH (3.5), with a maximum fluoride secretion at 30 days. MTT assay revealed that TXT reduces the viability of gingival cells with significant differences (p < 0.001) compared to the untreated cells (control group). ACTIVA provides optimal adhesive and microfiltration properties, releases substantial amounts of fluoride ions in both acid and neutral media, and its biocompatibility is greater than that of traditional composite resin adhesive systems.

Comparative Surface Morphology, Chemical Composition, and Cytocompatibility of Bio-C Repair, Biodentine, and ProRoot MTA on hDPCs

Biocompatibility is an essential property for any vital pulp material that may interact with the dental pulp tissues. Accordingly, this study aimed to compare the chemical composition and ultrastructural morphology of Biodentine (Septodont, Saint Maur-des-Fosses, France), ProRoot MTA (Dentsply Tulsa Dental Specialties, Johnson City, TN, USA), and Bio-C Repair (Angelus, Londrina, PR, Brazil), as well as their biological effects on human dental pulp cells. Chemical element characterization of the materials was undertaken using scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDX). The cytotoxicity was assessed by analyzing the cell viability (MTT assay), cell morphology (immunofluorescence assay), and cell attachment (flow cytometry assay). The results were statistically analyzed using ANOVA and Tukey’s test (p < 0.05). EDX revealed that ProRoot MTA and Biodentine were mostly composed of calcium, carbon, and oxygen (among others), whereas Bio-C Repair evidenced a low concentration of calcium and the highest concentration of zirconium. SEM showed adequate attachment of human dental pulp cells (hDPCS) to vital pulp materials and cytoskeletal alterations were not observed in the presence of material eluates. Remarkably, the undiluted Biodentine group showed higher viability than the control group cells (without eluates) at 24 h, 48 h, and 72 h (p < 0.001). Based on the evidence derived from an in vitro cellular study, it was concluded that Bio-C Repair showed excellent cytocompatibility that was similar to Biodentine and ProRoot MTA.

Dental stem cells in tooth repair: A systematic review

Background: Dental stem cells (DSCs) are self-renewable teeth cells, which help maintain or develop oral tissues. These cells can differentiate into odontoblasts, adipocytes, cementoblast-like cells, osteoblasts, or chondroblasts and form dentin/pulp. This systematic review aimed to summarize the current evidence regarding the role of these cells in dental pulp regeneration. Methods: We searched the following databases: PubMed, Cochrane Library, MEDLINE, SCOPUS, ScienceDirect, and Web of Science using relevant keywords. Case reports and non-English studies were excluded. We included all studies using dental stem cells in tooth repair whether in vivo or in vitro studies. Results: Dental pulp stem cell (DPSCs) is the most common type of cell. Most stem cells are incorporated and implanted into the root canals in different scaffold forms. Some experiments combine growth factors such as TDM, BMP, and G-CSF with stem cells to improve the results. The transplant of DPSCs and stem cells from apical papilla (SCAPs) was found to be associated with pulp-like recovery, efficient revascularization, enhanced chondrogenesis, and direct vascular supply of regenerated tissue. Conclusion: The current evidence suggests that DPSCs, stem cells from human exfoliated deciduous teeth, and SCAPs are capable of providing sufficient pulp regeneration and vascularization. For the development of the dental repair field, it is important to screen for more effective stem cells, dentine releasing therapies, good biomimicry scaffolds, and good histological markers.

Comparative Cytocompatibility and Mineralization Potential of Bio-C Sealer and TotalFill BC Sealer

The aim of this study was to investigate the cytocompatibility and mineralization potential of two premixed hydraulic endodontic sealers compared with an epoxy resin-based root canal sealer. The cellular responses and mineralization capacity were studied in human periodontal ligament stem cells (hPDLSCs) that were exposed to premixed hydraulic sealers, Bio-C Sealer (Angelus, Londrína, PR, Brazil), TotalFill BC Sealer (FKG Dentaire SA, La-Chaux-de-fonds, Switzerland) and an epoxy resin-based material, AH Plus (Dentsply De Trey, Konstanz, Germany). Non-exposed cultures served as the control. The endodontic sealers were assessed using scanning electron microscopy (SEM) and energy dispersive X-ray microanalysis (EDX). Statistical analyses were done using Analisis of Variance (ANOVA), with Bonferroni adjusted pairwise comparison (p = 0.05). AH Plus reduced cell viability and cell migration, whereas increased cell viability and cell migration were observed in the Bio-C Sealer and the TotalFill BC Sealer (p < 0.05). The lowest cell attachment and spreading were observed for all concentrations of AH Plus, whereas the highest were observed for TotalFill BC Sealer. At the end of 21 days, only the Bio-C Sealer and the TotalFill BC Sealer supported matrix mineralization (p < 0.05). Additionally, SEM-EDX revealed high content of calcium, oxygen, and silicon in the Bio-C Sealer and the TotalFill BC Sealer. Based on the results from this study, Bio-C Sealer and TotalFill BC Sealer demonstrated better cytocompatibility in terms of cell viability, migration, cell morphology, cell attachment, and mineralization capacity than AH Plus.

Biological Effects of New Hydraulic Materials on Human Periodontal Ligament Stem Cells

Background: The aim of this study was: to evaluate the biological properties of new hydraulic materials: Bio-C Repair and Bio-C Sealer. Methods: Periodontal ligament stem cells were exposed to several dilutions of Bio-C Repair and Bio-C Sealer. The ion release profile and pH were determined. Metabolic activity, cell migration and cell survival were assessed using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT), wound-healing assays and Annexin assays, respectively. Cells were cultured in direct contact with the surface of each material. These were then analyzed via scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). Statistical differences were assessed using a two-way ANOVA (α < 0.05). Results: Similar pH was observed in these cements. Bio-C Sealer released significantly more Ca and Si ions (p < 0.05) in comparison with Bio-C Repair. Undiluted Bio-C Sealer induced a significant reduction on cellular viability, cell survival and cell migration when compared to the control (p < 0.05). Moreover, SEM showed abundant cells adhered on Bio-C Repair and a moderate number of cells attached on Bio-C Sealer. Finally, EDX analysis identified higher percentages of Ca and O in the case of Bio-C repair than with Bio-C sealer, while other elements such as Zr and Si were more abundant in Bio-C sealer. Conclusions: Bio-C Repair displayed higher cell viability, cell adhesion and migration rates than Bio-C Sealer.

Comparison of diffusion, cytotoxicity and tissue inflammatory reactions of four commercial bleaching products against human dental pulp stem cells

Multiple side effects related to bleaching were found to occur in the dental pulp tissue, including decreased cell metabolism and viability. In this work we evaluated the in vitro diffusion capacity, cytotoxicity and biocompatibility of four commercial bleaching products on stem cells from human dental pulp (hDPSCs). Two commercial bleaching gels hydrogen peroxide-based (HP), Norblanc Office 37.5% (Nor-HP) and Opalescence Boost 40% (Opal-HP) were applied for 30 min to enamel/dentine discs. Another two gels from the same manufacturers, 16% carbamide peroxide-based (CP), Norblanc Home (Nor-CP) and Opalescence CP 16% (Opal-CP), were applied for 90 min. The diffusion of HP was analysed by fluorometry. Cytotoxicity was determined using the MTT assays, the determination of apoptosis, immunofluorescence assays and intracellular reactive oxygen species (ROS) level. Tissue inflammatory reactions were evaluated histopathologically in rats. Statistical differences were performed by one-way ANOVA and Bonferroni post-test (α < 0.05). Normon products showed lower cytotoxicity and diffusion capacity than the Ultradent products. A high intracellular ROS level was measured in hDPSCs after exposure to Opal-HP. Finally, a severe necrosis of both coronal and radicular pulp was observed with Opal-HP. Similar concentrations of hydrogen peroxide and carbamide peroxide in a variety of bleaching products exhibited different responses in cells and dental pulp tissue, suggesting that bleaching products contain unknown agents that could influence their toxicity.

Effects of Three Calcium Silicate Cements on Inflammatory Response and Mineralization-Inducing Potentials in a Dog Pulpotomy Model

This beagle pulpotomy study compared the inflammatory response and mineralization-inducing potential of three calcium silicate cements: ProRoot mineral trioxide aggregate (MTA) (Dentsply, Tulsa, OK, USA), OrthoMTA (BioMTA, Seoul, Korea), and Endocem MTA (Maruchi, Wonju, Korea). Exposed pulp tissues were capped with ProRoot MTA, OrthoMTA, or Endocem MTA. After 8 weeks, we extracted the teeth, then performed hematoxylin-eosin and immunohistochemical staining with osteocalcin and dentin sialoprotein. Histological evaluation comprised a scoring system with eight broad categories and analysis of calcific barrier areas. We evaluated 44 teeth capped with ProRoot MTA (n = 15), OrthoMTA (n = 18), or Endocem MTA (n = 11). Most ProRoot MTA specimens formed continuous calcific barriers; these pulps contained inflammation-free palisading patterns in the odontoblastic layer. Areas of the newly formed calcific barrier were greater with ProRoot MTA than with Endocem MTA (p = 0.006). Although dentin sialoprotein was highly expressed in all three groups, the osteocalcin expression was reduced in the OrthoMTA and Endocem MTA groups. ProRoot MTA was superior to OrthoMTA and Endocem MTA in all histological analyses. ProRoot MTA and OrthoMTA resulted in reduced pulpal inflammation and more complete calcific barrier formation, whereas Endocem MTA caused a lower level of calcific barrier continuity with tunnel defects.

Biological Effects of Provisional Resin Materials on Human Dental Pulp Stem Cells

OBJECTIVES

This study investigated the in vitro cytotoxicity as well as the proinflammatory cytokine expression of provisional resin materials on primary cultured human dental pulp stem cells (hDPSCs).

METHODS

Five commercially available provisional resin materials were chosen (SNAP [SN], Luxatemp [LT], Jet [JE], Revotek LC [RL], and Vipi block [VB]). Eluates that were either polymerizing or already set were added to hDPSCs under serially diluted conditions divided into three different setting times (25% set, 50% set, and 100% set) and incubated for 24 hours with 2× concentrated culture media. Cell cytotoxicity tests were performed by LDH assay and live and dead confocal microscope images. The expression of proinflammatory cytokines in SN and VB was measured using cytokine antibody arrays. Data were analyzed using repeated measures analysis of variance (ANOVA) or ANOVA followed by the Tukey post hoc test at a significance level of p<0.05.

RESULTS

Cytotoxicity greater than 30% was observed in the 50% diluted culture in SN, LT, and JE in the already set stage (p<0.05), while it was detected in SN and LT in early or intermediate stage samples. The cytotoxicity of SN, JE, and LT was greater with eluates from the polymerizing phase compared to that from already set samples (p<0.05), as observed by live and dead images. On the other hand, RL and VB did not exhibit cytotoxicity greater than 30%. Proinflammatory cytokines were not detected in 12.5% diluted culture with eluates from VB and early set stage SN.

CONCLUSIONS

The eluates from chemical-activated provisional resin materials during polymerization (SN, LT, and JE) were cytotoxic to hDPSCs and may adversely affect pulp tissue.