Re-evaluation of polyglycerol polyricinoleate (E 476) as a food additive

The effects of different types of polysaccharides on the structure and physical properties of W/O/W emulsions under varying pH conditions

BACKGROUND

Biopolymer based water-in-oil-in-water double (W1/O/W2) emulsion systems comprise a complex emulsion system that might be affected by several factors and the status at multiple phases. The present study investigated the physicochemical properties of W1/O/W2 double emulsions with inner W1 phase incorporated with various polysaccharides and the outer phase stabilized by whey protein isolate (WPI). Six different polysaccharides were selected as co-emulsifiers in the inner phase, and their effects on morphology, droplet size, zeta potential and rheology properties were evaluated. Furthermore, the impact of WPI/polysaccharide concentration and pH on the physicochemical properties and storage stability of the emulsions was compared.

RESULTS

Emulsions with an inner phase incorporated with xanthan gum and carrageenan exhibited better stability than others. Increasing the concentration of WPI enhanced the overall stability of the double emulsion, although it compromised the integrity of the internal W1/O interface. On the other hand, a 1.0% concentration of polysaccharide, specifically when carrageenan is used, slowed down droplet floating and coagulation. An acidic external aqueous phase (pH 4) led to larger and more uniform particle size distributions, as well as enhanced stability. The lower pH decreased the viscosity and delayed molecular exchange in the oil phase, thereby preserving the structure of the double emulsion.

CONCLUSION

These findings contribute to a better understanding of the factors influencing the stability and properties of W1/O/W2 double emulsions with addition of anionic polysaccharides in the inner water phase. © 2024 Society of Chemical Industry.

Development of a GC-FID method for quantitative characterisation of polyglycerols in polyglycerol polyricinoleate (PGPR) present in a lipid matrix

PGPR is an emulsifier (E476) widely used in the food industry. In this study, a gas chromatography-flame ionisation detection (GC-FID) method was developed for the quantitative characterisation of the polyglycerol composition of PGPR. The method was validated to analyse quantitatively the polyglycerol species in neat PGPR products and in PGPR samples present in a lipid matrix. This method consists of saponification, acidification and petroleum ether extraction to remove interfering fatty acids, neutralisation, silylation and finally GC-FID analysis. Phenyl β-D-glucopyranoside was used as internal standard as sorbitol proved unsuitable due to its susceptibility to interference from Na/K chloride during silylation. The response factors of glycerol and diglycerol towards phenyl β-D-glucopyranoside were determined using pure standards, while response factors of polyglycerols with a degree of polymerisation of at least 3 could be reliably estimated according to an effective carbon number (ECN) approach. The validity of the method applied to PGPR samples was further supported on the basis of a mass balance considering the experimentally determined polyglycerol and fatty acid content. Moreover, recoveries of di-, tri-, tetra- and pentaglycerol were more than 95% for various PGPR samples added to two different lipid matrices at 2 wt% and 5 wt% concentrations. Furthermore, the method proved to be very repeatable (with relative standard deviation values below 2.2%). On the other hand, the inevitable presence of glycerol in the lipid samples caused fouling of the detector and column overloading, requiring frequent cleaning of the detector and trimming off part of the column.

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Chloroplast/thylakoid-rich material: A possible alternative to the chemically synthesised flow enhancer polyglycerol polyricinoleate in oil-based systems

Chloroplasts are abundant organelles in a diverse range of plant materials; they are predominantly composed of multicomponent thylakoid membranes which are lipid and protein rich. Intact or unravelled thylakoid membranes should, in principle, have interfacial activity, but little has been published on their activity in oil-in-water systems, and nothing on their performance on an oil continuous system. In this work different physical methods were used to produce a range of chloroplast/thylakoid suspensions with varying degrees of membrane integrity. Transmission electron microscopy revealed that pressure homogenisation led to the greatest extent of membrane and organelle disruption compared to less energy intensive preparation methods The ability of the derived materials to modulate the flow behaviour of a chocolate model system (65% (w/w) sugar/ sunflower oil (natural amphiphiles removed) suspension) was investigated by acquiring rheological parameters. All chloroplast/thylakoid preparations reduced yield stress, apparent viscosity, tangent flow point and cross over point in a concentration-dependent fashion, although not as significantly as polyglycerol polyricinoleate applied at a commercially relevant concentration in the same chocolate model system. Confocal laser scanning microscopy confirmed presence of the alternative flow enhancer material at the sugar surfaces. This research reveals that low-energy processing methods that do not extensively disrupt thylakoid membranes are applicable to generating materials with marked capacity to affect the flow behaviour of a chocolate model system. In conclusion, chloroplast/thylakoid materials hold strong potential as natural alternatives to synthetic rheology modifiers for lipid-based systems such as PGPR.

The Potential Application of Pickering Multiple Emulsions in Food

Emulsions stabilized by adsorbed particles—Pickering particles (PPs) instead of surfactants and emulsifiers are called Pickering emulsions. Here, we review the possible uses of Pickering multiple emulsions (PMEs) in the food industry. Food-grade PMEs are very complex systems with high potential for application in food technology. They can be prepared by traditional two-step emulsification processes but also using complex techniques, e.g., microfluidic devices. Compared to those stabilized with an emulsifier, PMEs provide more benefits such as lower susceptibility to coalescence, possible encapsulation of functional compounds in PMEs or even PPs with controlled release, etc. Additionally, the PPs can be made from food-grade by-products. Naturally, w/o/w emulsions in the Pickering form can also provide benefits such as fat reduction by partial replacement of fat phase with internal water phase and encapsulation of sensitive compounds in the internal water phase. A possible advanced type of PMEs may be stabilized by Janus particles, which can change their physicochemical properties and control properties of the whole emulsion systems. These emulsions have big potential as biosensors. In this paper, recent advances in the application of PPs in food emulsions are highlighted with emphasis on the potential application in food-grade PMEs.

Follow-up of the re-evaluation of polyglycerol polyricinoleate (E 476) as a food additive

Polyglycerol polyricinoleate (PGPR, E 476) was re‐evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow‐up to this assessment, in this opinion, the Panel on Food Additives and Flavouring (FAF) addresses the data gaps identified to support an amendment of the EU specifications for E 476. Additionally, this opinion deals with the assessment of the proposed extension of use for E 476 in edible ices and a revision of the maximum permitted level in emulsified sauces. The Panel concluded that the proposed extension of use, if authorised, would not give rise to a safety concern. Additionally, the Panel performed a risk assessment of undesirable impurities potentially present in E 476. The Panel concluded that the maximum limits in the EU specifications for the four toxic elements (arsenic, lead, mercury, cadmium) should be lowered based on actual levels in the commercial food additive E 476. The Panel also concluded that maximum limits for glycidyl esters and 3‐monochloropropanediol should be included in the EU specifications for E 476. Alternatively, the Panel recommends an amendment of the definition of E 476 to include a requirement that the fats and oils used in the manufacturing of E 476 comply with the respective EU legislation regarding suitability for human consumption. Further, the Panel recommends a modification of the definition of E 476 indicating that polyglycerol used for the manufacturing of E 476 should be produced from glycerol meeting the specifications for E 422 (Commission Regulation (EU) No 231/2012). In this case, respective specification limits for epichlorohydrin, acrolein and butanetriol would not be needed for E 476. Finally, the Panel concluded that the proposed method based on the determination of ricinoleic acid is suitable for the determination of E 476 content in food.

Preparation of Water-in-Oil Nanoemulsions Loaded with Phenolic-Rich Olive Cake Extract Using Response Surface Methodology Approach

In this study, we aimed to prepare stable water-in-oil (W/O) nanoemulsions loaded with a phenolic-rich aqueous phase from olive cake extract by applying the response surface methodology and using two methods: rotor-stator mixing and ultrasonic homogenization. The optimal nanoemulsion formulation was 7.4% (w/w) of olive cake extract as the dispersed phase, and 11.2% (w/w) of a surfactant mixture of polyglycerol polyricinoleate (97%) and Tween 80 (3%) in Miglyol oil as the continuous phase. Optimum results were obtained by ultrasonication for 15 min at 20% amplitude, yielding W/O nanoemulsion droplets of 104.9 ± 6.7 nm in diameter and with a polydispersity index (PDI) of 0.156 ± 0.085. Furthermore, an optimal nanoemulsion with a droplet size of 105.8 ± 10.3 nm and a PDI of 0.255 ± 0.045 was prepared using a rotor-stator mixer for 10.1 min at 20,000 rpm. High levels of retention of antioxidant activity (90.2%) and phenolics (83.1–87.2%) were reached after 30 days of storage at room temperature. Both W/O nanoemulsions showed good physical stability during this storage period.

Safety and efficacy of a feed additive consisting of cashew nutshell liquid for all animal species (Oligobasic Europe)

Following a request from European Commission, the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety and efficacy of the additive cashew nutshell liquid as a technological additive (antioxidant) in feedingstuffs for all animal species. The additive cashew nutshell liquid consists of an artificial mixture of two components, the oil extracted from the cashew nutshell, called CNSL and castor oil. In the absence of adequate data, the FEEDAP Panel is not in the position to conclude on the characterisation of the additive nor to conclude on the safety of cashew nutshell liquid for the target species, the consumer and the environment. The additive is considered skin and eye irritant and a skin sensitiser. Exposure via inhalation is unlikely. The additive is an effective antioxidant in feedingstuffs and feed material for all animal species at the proposed conditions of use.