Root and shoot extracts of Ajuga chamaecistus subsp. scoparia as natural inhibitors for 304 stainless steel corrosion in strong acidic medium

Novel biphenylidene-thiopyrimidine derivatives as corrosion inhibitors for carbon-steel in oilfield produced water

The inhibiting efficiency of three newly synthesized organic compounds:5-((4'-(dimethylamino)-[1,1'-biphenyl]-4-yl)methylene)-1,3-diethyl-2-thioxodihydropyrimidine-4,6(1H,5H)-dione (HM-1228), 5-((4'-(dimethylamino)-[1,1'-biphenyl]-4-yl)methylene)-2-thioxodihydropyrimidine-4,6(1H,5H)-dione (HM-1227) and 5-((4'-(dimethylamino)-[1,1'-biphenyl]-4-yl)methylene)pyrimidine-2,4,6(1H,3H,5H)-trione (HM-1226) in oilfield produced water on the corrosion of carbon steel has been examined via electrochemical measurements; potentiodynamic polarization (PDP) and electrochemical impedance (EIS) techniques. The adsorption of these compounds on the surface of carbon steel followed Langmuir isotherm. In addition, the surface morphology of uninhibited and inhibited carbon steel was examined by Atomic Force Microscopy (AFM), observing surface improvement when carbon steel samples exposed to the inhibited corrosive solutions. The average surface roughness (Ra) in oilfield produced water solution in the presence of 0.5 mM of HM-1228 inhibitor was 138.28 nm compared to the uninhibited surface 571.62 nm. To explore the corrosion inhibition mechanism, quantum chemical calculations and Monte Carlo simulations were utilized. The HM-1228 inhibitor demonstrated the highest corrosion inhibition efficiency at 94.8% by PDP measurements. The higher corrosion inhibition of compound HM-1228 can be attributed to the presence of di-N-ethyl groups that enhance both electron donating ability and lipophilic properties.

Innovative Method for Coating of Natural Corrosion Inhibitor Based on Artemisia vulgaris

In this work, the production of a novel methodology for the application of natural corrosion inhibitors on steel, using an autoclave is presented. Tests were carried out using Artemisia vulgaris. The inhibitor was produced with a simple soxhlet extraction process using 15 g of Artemisia vulgaris and 260 mL of Ether. Once the inhibitor was produced, the steel was immersed in it, to form a coating that protects the material against corrosion. Thermogravimetry analyzes (TGA) were performed on the inhibitor, to determine the degradation temperature; it was observed that, at 321 °C, the loss of organic mass begins. After applying the inhibitor to the steel, the Fourier Transform Infrared Spectroscopy (FTIR) technique was used to determine the vibrational bands and the difference between the spectra for the steels before and after the coating was applied. For the evaluation of the method efficiency, Electrochemical Impedance Spectroscopy (EIS) and polarization resistance tests were performed, where Nyquist diagrams and Tafel curves were obtained, for steels with and without treatment. In this case, an increase of 93% in the corrosion resistance, and an 88% decrease in the corrosion rate were observed, proving that this methodology can be used to protect steel against corrosion and extend the steel’s useful life.

The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H₂SO₄ was studied by the weight loss method and the electrochemical method. The results demonstrated that the efficiency of inhibition increased with an increase in the concentration of RLE and decreased with an increase in temperature. The inhibition performance reached 93% with 300 mg L⁻¹ at 298 K. RLE behaved as a mixed-type inhibitor based on the cathode. The inhibition mechanism involved the adsorption of the active ingredients of RLE on the mild steel surface to prevent corrosion. The adsorption followed the Langmuir adsorption isotherm, and physical and chemical adsorption coexisted. The results were supported by SEM, quantum chemical calculations, FTIR and UV-visible spectroscopy analyses.

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H₂SO₄ was studied by the weight loss method and the electrochemical method.