Validated Electrochemical Method for Simultaneous Resolution of Tyrosine, Uric Acid, and Ascorbic Acid at Polymer Modified Nano-Composite Paste Electrode

Creative synthesis of pH-dependent nanoporous pectic acid grafted with acrylamide and acrylic acid copolymer as an ultrasensitive and selective riboflavin electrochemical sensor in real samples

In current research, an innovative pectic acid was grafted with poly (acrylamide-co-acrylic acid) [PA-g-poly (AAm-co-AA)] nanoporous membrane using a free radical-mediated grafting copolymerization process. The optimized parameters for the grafting copolymerization reaction such as initiator concentration, monomer concentrations, polymerization reaction time, and temperature were studied. Additionally, the solid content, graft percentage, and conversion were calculated. The unique polymeric membrane was characterized using Fourier-transform infrared spectroscopy (FT-IR), thermal gravimetry (TG), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) supported by energy dispersive X-ray spectroscopy (EDX). The formulated novel PA-g-poly (AAm-co-AA) had a nanoporous structure with a diameter of 113 nm. pH-dependent swelling and biodegradation measurements were also studied. The electrochemical characterizations of PA-g-poly (AAm-co-AA) were conducted through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Furthermore, the screen-printed electrode (SPE) was modified with pure PA and the new generation of its grafted polymeric nanoparticles to detect and quantify the concentration of riboflavin (RF) in real samples using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The modified electrode showed two linear concentration ranges from 0.01 - 2 nM and 2 - 90 nM with low detection limits (LODs) of 0.004 and 0.97 nM, respectively, demonstrating high sensitivity. Besides, the fabricated sensor exhibited more selectivity, simplicity, great reproducibility, repeatability, and good stability. Finally, the PA-g-poly (AAm-co-AA)-modified SPE based sensor was effectively used in real sample analysis of egg yolk, milk, and vitamin B2 drugs with good recovery rates.

Simultaneous Determination of Sulfamethoxazole and Trimethoprim from Clinical Urine and Blood Serum Samples by the Application of Poly(Cu2P4BCL4)/GCE

Synthetic antibiotics known as sulfonamides suppress the synthesis of tetrahydrofolic acid, which cures respiratory tract infections and protozoal infections by preventing the creation of dihydrofolic acid. Electrochemical sensors based on tetrakis(1,10-phenanthroline)-μ-(4,4'-bipyridine) dicopper(II) chloride monohydrate ([P2Cu-Bip-CuP2]Cl4·H2O or simply Cu2P4BCl4) have been successfully applied for the determination of sulfamethoxazole (SMX) and trimethoprim (TMP) from samples. The experimental conditions and parameters were optimized to achieve the best electrode performances for simultaneous quantification of SMX and TMP. Based on the analysis of the effect of scan rate on the peak parameters, the R 2 for the peak current vs square root of the scan rate was greater than that of the peak current vs scan rate, indicating diffusion-controlled behavior of both species. The current intensities of both SMX and TMP were highly improved due to surface activation of the electrodes by electropolymerization. For SMX, the limit of detection was determined to be 27.94 nM, while for TMP, it was 21.56 nM, and the limit of quantifications was 71.88 nM, and the corresponding relative standard deviation for each was 0.74% and 0.11%. The constructed electrode was stored for varying durations ranging from two h to 2 days, and it was found to be above 97% stable after storing for 15 days. The real applicability of the suggested sensor for the simultaneous determination of SMX and TMP was verified by sensing clinical serum and urine samples and their spike recovery studies.

A Sensitive Enzymatic Electrochemical Biosensor for Cholesterol Based on Cobalt Ferrite@Molybdenum Disulfide/Gold Nanoparticles

Cholesterol is essential in biological systems, and the level of cholesterol in the body of a person acts as a diagnostic marker for a variety of diseases. So, in this work, we fabricated an enzymatic electrochemical biosensor for cholesterol using cobalt ferrite@molybdenum disulfide/gold nanoparticles (CoFe2O4@MoS2/Au). The synthesized composite was used for the determination of cholesterol by voltametric methods. The electroactive material CoFe2O4@MoS2/Au was successfully verified from the physiochemical studies such as XRD, Raman, FT-IR, and XPS spectroscopy along with morphological FESEM and HRTEM characterization. CoFe2O4@MoS2/Au showed outstanding dispersion in the aqueous phase, a large effective area, good biological compatibility, and superior electronic conductivity. The microflower-like CoFe2O4@MoS2/Au was confirmed by scanning electron microscopy. The image of transmission electron microscopy showed decoration of gold nanoparticles on CoFe2O4@MoS2 surfaces. Furthermore, a one-step dip-coating technique was used to build the biosensor used for cholesterol detection. In addition to acting as an enabling matrix to immobilize cholesterol oxidase (ChOx), CoFe2O4@MoS2/Au contributes to an increase in electrical conductivity. The differential pulse voltammetry method was used for the quantitative measurement of cholesterol. The calibration curve for cholesterol was linear in the concentration range of 5 to 100 μM, with a low limit of detection of 0.09 μM and sensitivity of 0.194 μA μM-1 cm-2. Furthermore, the biosensor demonstrates good practicability, as it was also employed for identifying cholesterol in real samples with acceptable selectivity and stability.

Electrochemical Detection of Uric Acid Based on a Carbon Paste Electrode Modified with Ta2O5 Recovered from Ore by a Novel Method

Except for well-known commercial production procedures, this study demonstrates that Ta2O5 particles can be produced. Through a series of steps, highly pure Ta2O5 particles (99.45%) were produced from the raw ore. We have electrochemically detected one of the important nitrogenous compounds present in urine, "uric acid", by a Ta2O5 particle-modified carbon paste electrode (Ta2O5-MCPE) using cyclic voltammetry. The prepared electrode has shown excellent current sensitivity at a pH of 6.0 phosphate-buffered solution. We have found that 4 mg Ta2O5-MCPE has recorded the highest current sensitivity of 75.75 μA. The oxidation peak current was varied with the uric acid concentration in the range from 1 to 5 mM at 4 mg Ta2O5-MCPE. We have calculated the electrode-active surface area for a bare carbon paste electrode and 4 mg Ta2O5-MCPE using the Randles-Sevcik equation, and the values were found to be 0.0202 and 0.0450 cm2, respectively. On the other hand, the calculated values of limit of detection and limit of quantification were reported as 0.5937 × 10-8 M and 1.9791 × 10-8 M, respectively, for the prepared 4 mg Ta2O5-MCPE. The interfere studies revealed that the variation in the electrochemical signal of uric acid in the presence of different metal ions was found to be less than ±5%.

Nanomaterial-based electrochemical sensors for detection of amino acids

Amino acids are the building blocks of proteins and muscle tissue. They also play a significant role in physiological processes related to energy, recovery, mood, muscle and brain function, fat burning and stimulating growth hormone or insulin secretion. Accurate determination of amino acids in biological fluids is necessary because any changes in their normal ranges in the body warn diseases like kidney disease, liver disease, type 2 diabetes and cancer. To date, many methods such as liquid chromatography, fluorescence mass spectrometry, etc. have been used for the determination of amino acids. Compared with the above techniques, electrochemical systems using modified electrodes offer a rapid, accurate, cheap, real-time analytical path through simple operations with high selectivity and sensitivity. Nanomaterials have found many interests to create smart electrochemical sensors in different application fields e.g. biomedical, environmental, and food analysis because of their exceptional properties. This review summarizes recent advances in the development of nanomaterial-based electrochemical sensors in 2017-2022 for the detection of amino acids in various matrices such as serum, urine, blood and pharmaceuticals.

3D-printed sensor decorated with nanomaterials by CO2 laser ablation and electrochemical treatment for non-enzymatic tyrosine detection

The combination of CO₂ laser ablation and electrochemical surface treatments is demonstrated to improve the electrochemical performance of carbon black/polylactic acid (CB/PLA) 3D-printed electrodes through the growth of flower-like Na₂O nanostructures on their surface. Scanning electron microscopy images revealed that the combination of treatments ablated the electrode's polymeric layer, exposing a porous surface where Na₂O flower-like nanostructures were formed. The electrochemical performance of the fabricated electrodes was measured by the reversibility of the ferri/ferrocyanide redox couple presenting a significantly improved performance compared with electrodes treated by only one of the steps. Electrodes treated by the combined method also showed a better electrochemical response for tyrosine oxidation. These electrodes were used as a non-enzymatic tyrosine sensor for quantification in human urine samples. Two fortified urine samples were analyzed, and the recovery values were 106 and 109%. The LOD and LOQ for tyrosine determination were 0.25 and 0.83 μmol L^-1, respectively, demonstrating that the proposed devices are suitable sensors for analyses of biological samples, even at low analyte concentrations.

Synthesis and Characterization of High Entropy Alloy 23Fe-21Cr-18Ni-20Ti-18Mn for Electrochemical Sensor Applications

High entropy alloys (HEA) are one of the modern-era alloys accelerating with greater velocity because of their excellent properties and different applications. In the present paper, we have successfully fabricated HEA (23Fe-21Cr-18Ni-20Ti-18Mn) powders by ball milling the elemental Fe, Cr, Ni, Ti, and Mn powders for 15 h. The advancement of the milling process and phase transformation of HEAs were studied by using X-ray diffraction (XRD) and scanning electron microscope (SEM). The crystallite size and the lattice strain of the HEA were calculated by using the Williamson-Hall (W-H) equation and the values were found to be 7 nm and 0.0176%, respectively. Similarly, the true lattice parameter was calculated using the Nelson-Riley (N-R) extrapolation method, and the value was found to be 3.544 Å. We have successfully investigated the electrochemical response of 15 h ball milled 23Fe-21Cr-18Ni-20Ti-18Mn HEA powders to determine the ascorbic acid (AA) using cyclic voltammetry. We have modified the carbon paste electrode with ball milled HEA of concentrations 0, 2, 4, 6, 8, and 10 mg, and among them, 8 mg HEA modified carbon paste electrode (HEA-MCPE) depicted the highest current sensitivity. We reported the effect of modifier concentration, analyte concentration, scan rate, and pH on the oxidation peak of AA. The electrochemical active surface area of carbon paste and MCPE was calculated using the Nernst equation and the values were found to be 0.0014 cm² and 0.0027 cm², respectively. The fabricated HEA-MCPE showed excellent current sensitivity, stability, anti-fouling, and selectivity.

A Review of Sensors and Biosensors Modified with Conducting Polymers and Molecularly Imprinted Polymers Used in Electrochemical Detection of Amino Acids: Phenylalanine, Tyrosine, and Tryptophan

Recently, the studies on developing sensors and biosensors-with an obvious interdisciplinary character-have drawn the attention of many researchers specializing in various fundamental, but also complex domains such as chemistry, biochemistry, physics, biophysics, biology, bio-pharma-medicine, and bioengineering. Along these lines, the present paper is structured into three parts, and is aimed at synthesizing the most relevant studies on the construction and functioning of versatile devices, of electrochemical sensors and biosensors, respectively. The first part presents examples of the most representative scientific research focusing on the role and the importance of the phenylalanine, tyrosine, and tryptophan amino acids, selected depending on their chemical structure and their impact on the central nervous system. The second part is dedicated to presenting and exemplifying conductor polymers and molecularly imprinted polymers used as sensitive materials in achieving electrochemical sensors and biosensors. The last part of the review analyzes the sensors and biosensors developed so far to detect amino acids with the aid of conductor polymers and molecularly imprinted polymers from the point of view of the performances obtained, with emphasis on the detection methods, on the electrochemical reactions that take place upon detection, and on the electroanalytical performances. The present study was carried out with a view to highlighting, for the benefit of specialists in medicine and pharmacy, the possibility of achieving and purchasing efficient devices that might be used in the quality control of medicines, as well as in studying and monitoring diseases associated with these amino acids.

Development of Polypyrrole Modified Screen-Printed Carbon Electrode Based Sensors for Determination of L-Tyrosine in Pharmaceutical Products

Good health, of vital importance in order to carry out our daily routine, consists of both physical and mental health. Tyrosine (Tyr) deficiency as well as its excess are issues that can affect mental health and can generate disorders such as depression, anxiety, or stress. Tyr is the amino acid (AA) responsible for maintaining good mental health, and for this reason, the present research presents the development of new electrochemical sensors modified with polypyrrole (PPy) doped with different doping agents such as potassium hexacyanoferrate (II) (FeCN), sodium nitroprusside (NP), and sodium dodecyl sulfate (SDS) for a selective and sensitive detection of Tyr. The development of the sensors was carried out by chronoamperometry (CA) and the electrochemical characterization was carried out by cyclic voltammetry (CV). The detection limits (LOD) obtained with each modified sensor were 8.2 × 10-8 M in the case of PPy /FeCN-SPCE, 4.3 × 10-7 M in the case of PPy/NP-SPCE, and of 3.51 × 10-7 M in the case of PPy/SDS-SPCE, thus demonstrating a good sensitivity of these sensors detecting L-Tyr. The validation of sensors was carried out through quantification of L-Tyr from three pharmaceutical products by the standard addition method with recoveries in the range 99.92-103.97%. Thus, the sensors present adequate selectivity and can be used in the pharmaceutical and medical fields.