Streptococcus mutans and Streptococcus sobrinus biofilm formation and metabolic activity on dental materials

Application of MTT assay for probing metabolic activity in bacterial biofilm-forming cells on nanofibrous materials

The quantification of cellular metabolic activity via MTT assay has become a widespread practice in eukaryotic cell studies and is progressively extending to bacterial cell investigations. This study pioneers the application of MTT assay to evaluate the metabolic activity of biofilm-forming cells within bacterial biofilms on nanofibrous materials. The biofilm formation of Staphylococcus aureus and Escherichia coli on nanomaterials electrospun from polycaprolactone (PCL), polylactic acid (PLA), and polyamide (PA) was examined. Various parameters of the MTT assay were systematically investigated, including (i) the dissolution time of the formed formazan, (ii) the addition of glucose, and (iii) the optimal wavelength for spectrophotometric determination. Based on interim findings, a refined protocol suitable for application to nanofibrous materials was devised. We recommend 2 h of the dissolution, the application of glucose, and spectrophotometric measurement at 595 nm to obtain reliable data. Comparative analysis with the reference CFU counting protocol revealed similar trends for both tested bacteria and all tested nanomaterials. The proposed MTT protocol emerges as a suitable method for assessing the metabolic activity of bacterial biofilms on PCL, PLA, and PA nanofibrous materials.

Pectolinarin Inhibits the Bacterial Biofilm Formation and Thereby Reduces Bacterial Pathogenicity

Bacterial biofilms are a growing problem as it is a major cause of nosocomial infection from urinary catheters to chronic tissue infections and provide resistance to a variety of antibiotics and the host’s immune system. The effect of pectolinarin on the biofilm formation in Enterococcus faecalis, Enterococcus faecium, Escherichia coli, Streptococcus mutans, Streptococcus sobrinus, Staphylococcus aureus, Pseudomonas aeruginosa, Cutibacterium acnes, and Porphyromonas gingivalis was studied in TSBg (tryptic soy broth supplemented with 1% glucose). Pectolinarin inhibited biofilm formation of E. faecalis (IC₅₀ = 0.39 μg/mL), E. faecium (IC₅₀ = 0.19 μg/mL), E. coli (IC₅₀ = 0.25 μg/mL), S. mutans (IC₅₀ = 1.2 μg/mL), S. sobrinus (IC₅₀ = 1.4 μg/mL), S. aureus (IC₅₀ = 0.39 μg/mL), P. aeruginosa (IC₅₀ = 0.9 μg/mL), P. acnes (IC₅₀ = 12.5 μg/mL), and P. gingivalis (IC₅₀ = 9.0 μg/mL) without inhibiting the bacterial growth. Pectolinarin also showed increased susceptibility of antibacterial activity with commercially available antibiotics including ampicillin, vancomycin, streptomycin, and oxytetracyclin against E. faecalis and E. faecium. Finally, pectolinarin dose-dependently reduced the expression of genes including cytolysin genes (cylLS, cylR2 and cylM), quorum sensing (QS) genes (fsrB, fsrC, gelE, ebpA, ebpB, acm, scm and bps), and biofilm virulence genes (esp) of E. faecalis and E. faecium. Pectolinarin reduced the bacterial biofilm formation, activated the antibacterial susceptibility, and reduced the bacterial adherence. These results suggest that bacterial biofilm formation is a good target to develop the antibacterial agents against biofilm-related infections.

Aurora Borealis in dentistry: The applications of cold plasma in biomedicine

Plasma is regularly alluded to as the fourth form of matter. Its bounty presence in nature along with its potential antibacterial properties has made it a widely utilized disinfectant in clinical sciences. Thermal plasma and non-thermal (or cold atmospheric) plasma (NTP) are two types of plasma. Atoms and heavy particles are both available at the same temperature in thermal plasma. Cold atmospheric plasma (CAP) is intended to be non-thermal since its electrons are hotter than the heavier particles at ambient temperature. Direct barrier discharge (DBD), atmospheric plasma pressure jet (APPJ), etc. methods can be used to produce plasma, however, all follow a basic concept in their generation. This review focuses on the anticipated uses of cold atmospheric plasma in dentistry, such as its effectiveness in sterilizing dental instruments by eradicating bacteria, its advantage in dental cavity decontamination over conventional methods, root canal disinfection, its effects on tooth whitening, the benefits of plasma treatment on the success of dental implant placement, and so forth. Moreover, the limitations and probable solutions has also been anticipated. These conceivable outcomes thus have proclaimed the improvement of more up-to-date gadgets, for example, the plasma needle and plasma pen, which are efficient in treating the small areas like root canal bleaching, biofilm disruption, requiring treatment in dentistry.

•

Non-thermal plasma (NTP) has regarded as an important tool for biomedical application especially dental application.

•

The surface application of NTP can be used for disinfecting microbial infection in endodontic issues.

•

NTP can be used to eradicate the microorganism biofilm responsible for dental caries.

•

NTP can also be utilized in would healing, implant modifications and adhesive restoration.

•

NTP is potential candidate for clinical application in dentistry based on the experimental proofs.

Multiple biosurfactant production by Aureobasidium pullulans strain YTP6-14 in aqueous and heavy oil layers

Aureobasidium pullulans YTP6-14 was demonstrated to be an excellent multiple biosurfactant producer utilizing cheap carbon sources available in Thailand, including glycerol and cassava flour hydrolysate. A. pullulans YTP6-14 maximally produced 1.81 g/l biosurfactant in an aqueous layer (BS-AQ) in a medium containing glycerol, and 7.37 or 6.37 g/l biosurfactant in a heavy oil layer (BS-HO) in cassava flour hydrolysate or a glucose containing medium, respectively. Each BS-AQ and BS-HO had critical micelle concentration values of 41.32 mg/l and 13.51 mg/l, and both biosurfactants formed a stable food oil emulsion and reduced the amount of biofilms formed by Streptococcus sobrinus and Streptococcus mutans. BS-AQ and BS-HO were mainly composed of liamocins or exophilins and massoia lactone, respectively.

Comparative Evaluation of Chair-Side Saliva Tests According to Current Dental Status in Adult Patient

Background: this cross-sectional study evaluated the correlation of commercial chair-side saliva tests with caries status in adults. Methods: teeth in 87 adults (20–40 years old) were clinically examined for carious lesions according to International Caries Detection and Assessment System (ICDAS) criteria. The Decayed-Missing-Filling-Tooth (DMFT) and Decayed-Missing-Filling-Surface (DMFS) indexes at D1 (lesions 1–6 according to ICDAS criteria) and D3 (lesions 4–6 according to ICDAS criteria threshold and the number of active lesions, according to the Lesion Activity Assessment (LAA)) criteria were measured. The saliva parameters measured by chair-side tests were stimulated and non-stimulated saliva flow rate, saliva consistency, saliva pH, saliva buffer capacity, and lactic acid production. The statistical analyses performed were Student t-test and Mann–Whitney U test at a = 0.05 significant level. Results: the low resting saliva pH was related to a high value of DMFT (D1) index (p = 0.007). Conclusions: among the saliva parameters measured, the values of low resting pH are associated with increased DMFT at threshold D1. None of the chair-side available saliva tests evaluated can accurately underline the tooth carious status.

Dental adhesive microtensile bond strength following a biofilm-based in vitro aging model

OBJECTIVE

Laboratory tests are routinely used to test bonding properties of dental adhesives. Various aging methods that simulate the oral environment are used to complement these tests for assessment of adhesive bond durability. However, most of these methods challenge hydrolytic and mechanical stability of the adhesive- enamel/dentin interface, and not the biostability of dental adhesives. To compare resin-dentin microtensile bond strength (μTBS) after a 15-day Streptococcus mutans (SM) or Streptococcus sobrinus (SS) bacterial exposure to the 6-month water storage (WS) ISO 11405 type 3 test.

METHODOLOGY

A total of 31 molars were flattened and their exposed dentin was restored with Optibond-FL adhesive system and Z-100 dental composite. Each restored molar was sectioned and trimmed into four dumbbell-shaped specimens, and randomly distributed based on the following aging conditions: A) 6 months of WS (n=31), B) 5.5 months of WS + 15 days of a SM-biofilm challenge (n=31), C) 15 days of a SM-biofilm challenge (n=31) and D) 15 days of a SS-biofilm challenge (n=31). μTBS were determined and the failure modes were classified using light microscopy.

RESULTS

Statistical analyses showed that each type of aging condition affected μTBS (p<0.0001). For Group A (49.7±15.5MPa), the mean μTBS was significantly greater than in Groups B (19.3±6.3MPa), C (19.9±5.9MPa) and D (23.6±7.9MPa). For Group D, the mean μTBS was also significantly greater than for Groups B and C, but no difference was observed between Groups B and C.

CONCLUSION

A Streptococcus mutans- or Streptococcus sobrinus-based biofilm challenge for 15 days resulted in a significantly lower μTBS than did the ISO 11405 recommended 6 months of water storage. This type of biofilm-based aging model seems to be a practical method for testing biostability of resin-dentin bonding.

Anti-Bacterial Properties and Biocompatibility of Novel SiC Coating for Dental Ceramic

A 200 nm plasma-enhanced chemical vapor-deposited SiC was used as a coating on dental ceramics to improve anti-bacterial properties for the applications of dental prosthesis. A thin SiO₂ (20 nm) in the same system was deposited first, prior to SiC deposition, to improve the adhesion between SiC to dental ceramic. Silane and methane were the precursors for SiC deposition, and the SiO₂ deposition employed silane and nitrous oxide as the precursors. SiC antimicrobial activity was evaluated on the proliferation of biofilm, Streptococcus sanguinis, and Streptococcus mutans on SiC-coated and uncoated dental ceramics for 24 h. The ceramic coating with SiC exhibited a biofilm coverage of 16.9%, whereas uncoated samples demonstrated a significantly higher biofilm coverage of 91.8%, measured with fluorescence and scanning electron microscopic images. The cytotoxicity of the SiC coating was evaluated using human periodontal ligament fibroblasts (HPdLF) by CellTiter-BlueCell viability assay. After 24 h of HPdLF cultivation, no obvious cytotoxicity was observed on the SiC coating and control group; both sets of samples exhibited similar cell adhesion and proliferation. SiC coating on a ceramic demonstrated antimicrobial activity without inducing cytotoxic effects.

The effect of aging methods on the fracture toughness and physical stability of an oxirane/acrylate, ormocer, and Bis-GMA-based resin composites

PURPOSE

To determine the effect of aging methods on the fracture toughness of a conventional Bis-GMA-based resin composite (Filtek Supreme), an ormocer-based resin composite (Admira), and an experimental hydrophobic oxirane/acrylate interpenetrating network resin system (OASys)-based composite.

METHODS

A 25 × 5 × 2.8-mm stainless-steel mold with 2.5 mm single-edge center notch, following ASTM standards [E399-90], was used to fabricate 135 specimens (n = 15) of the composite materials and randomly distributed into groups. For the baseline group, specimens were fabricated and then tested after 24-h storage in water. For the biofilm challenge, specimens were randomly placed in a six-well tissue culture plate and kept at 37 °C with bacterial growth media (Brain Heart Infusion (BHI); Streptococcus mutans) changed daily for 15 days. For the water storage challenge, specimens were kept in 5 ml of deionized distilled autoclaved water for 30 days at 37 °C. μCT evaluation by scanning the specimens was performed before and after the proposed challenge. Fracture toughness (K_Ic) testing was carried out following the challenges.

RESULTS

μCT surface area and volume analyses showed no significant changes regardless of the materials tested or the challenge. Filtek and Admira fracture toughness was significantly lower after the biofilm and water storage challenges. OASys mean fracture toughness values after water aging were significantly higher than that of baseline. Toughness values for OASys composites after biofilm aging were not statistically different when compared to either water or baseline values.

CONCLUSION

The fracture toughness of Bis-GMA and ormocer-based dental resin composites significantly decreased under water and bacterial biofilm assault. However, such degradation in fracture toughness was not visible in OASys-based composites.

CLINICAL SIGNIFICANCE

Current commercial dental composites are affected by the oral environment, which might contribute to the long-term performance of these materials.

Evaluation of Restorative Materials Containing Preventive Additives in a Secondary Caries Model in vitro

The incorporation of antibacterial agents into dental restorative materials is a promising strategy for secondary caries prevention. Previously, Carolacton affected Streptococcus mutans biofilm formation on composite materials in vitro. The present study evaluated secondary caries formation adjacent to Carolacton-containing composites and conventional restorative materials using an artificial biofilm model. Standardized cavities were prepared in bovine dentin-enamel samples (n = 175) and restored with various dental materials (Tetric EvoCeram [T], GrandioSo composite without [G] and with Carolacton [GC], Grandio Flow without [F] and with Carolacton [FC], GrandioSo containing sodium fluoride [GNaF], and Ketac Fil [K]). After artificial aging, S. mutans was grown on the samples for 7 days. The investigation of gap sizes and secondary caries formation was performed using confocal laser scanning microscopy and transversal microradiography. Median gap size in enamel was 9.4 µm (interquartile range 7.9–12.7). Compared to all other groups significant differences in gap sizes could be observed for Ketac Fil (p < 0.001; Mann-Whitney test). Only GrandioSo composite containing 30% sodium fluoride and Ketac Fil showed significantly smaller lesion areas in enamel (p < 0.001; Mann-Whitney test) than all other groups which was confirmed by the mineral loss data (p < 0.001; Mann-Whitney test). Based on the present in vitro results, it seems that Carolacton-containing composite in the current formulation within the shown simplified monoculture biofilm model is not able to prevent caries formation compared to fluoride-releasing restorative materials.

Antimicrobial potential of endocannabinoid and endocannabinoid-like compounds against methicillin-resistant Staphylococcus aureus

Infections caused by antibiotic-resistant strains of Staphylococcus aureus have reached epidemic proportions globally. Staphylococcal biofilms are associated with increased antimicrobial resistance and are generally less affected by host immune factors. Therefore, there is an urgent need for novel agents that not only aim at multidrug-resistant pathogens, but also ones that will act as anti biofilms. In the present study, we investigated the antimicrobial activity of the endocannabinoid (EC) anandamide (AEA) and the endocannabinoid-like (EC-like), arachidonoyl serine (AraS) against methicillin resistant S. aureus strains (MRSA). We observed a strong inhibition of biofilm formation of all tested MRSA strains as well as a notable reduction of metabolic activity of pre-formed MRSA biofilms by both agents. Moreover, staphylococcal biofilm-associated virulence determinants such as hydrophobicity, cell aggregation and spreading ability were altered by AEA and AraS. In addition, the agents were able to modify bacterial membrane potential. Importantly, both compounds prevent biofilm formation by altering the surface of the cell without killing the bacteria. Therefore, we propose that EC and EC-like compounds may act as a natural line of defence against MRSA or other antibiotic resistant bacteria. Due to their anti biofilm action these agents could also be a promising alternative to antibiotic therapeutics against biofilm-associated MRSA infections.

Development and characterization of p1025-loaded bioadhesive liquid-crystalline system for the prevention of Streptococcus mutans biofilms

Formation of a dental biofilm by Streptococcus mutans can cause dental caries, and remains a costly health problem worldwide. Recently, there has been a growing interest in the use of peptidic drugs, such as peptide p1025, analogous to the fragments 1025-1044 of S. mutans cellular adhesin, responsible for the adhesion and formation of dental biofilm. However, peptides have physicochemical characteristics that may affect their biological action, limiting their clinical performance. Therefore, drug-delivery systems, such as a bioadhesive liquid-crystalline system (LCS), may be attractive strategies for peptide delivery. Potentiation of the action of LCS can be achieved with the use of bioadhesive polymers to prolong their residence on the teeth. In line with this, three formulations - polyoxypropylene-(5)-polyoxyethylene-(20)-cetyl alcohol, oleic acid, and Carbopol C974P in different combinations (F1C, F2C, and F3C) were developed to observe the influence of water in the LCS, with the aim of achieving in situ gelling in the oral environment. These formulations were assessed by polarized light microscopy, small-angle X-ray scattering, rheological analysis, and in vitro bioadhesion analysis. Then, p1025 and a control (chlorhexidine) were incorporated into the aqueous phase of the formulation (F + p1025 and F + chlorhexidine), to determine their antibiofilm effect and toxicity on epithelial cells. Polarized light microscopy and small-angle X-ray scattering showed that F1C and F2C were LCS, whereas F3C was a microemulsion. F1C and F2C showed pseudoplastic behavior and F3C Newtonian behavior. F1C showed the highest elastic and bioadhesive characteristics compared to other formulations. Antibiofilm effects were observed for F + p1025 when applied in the surface-bound salivary phase. The p1025-loaded nanostructured LCS presented limited cytotoxicity and effectively reduced S. mutans biofilm formation, and could be a promising p1025-delivery strategy to prevent the formation of S. mutans dental biofilm.

Antibiofilm properties of model composites containing quaternary ammonium methacrylates after surface texture modification

OBJECTIVE

Investigate antimicrobial properties and surface texture of model composites with different concentration and alkyl chain length of quaternary ammonium monomers (QAS).

METHODS

Monomers derived from QAS salts with alkyl chain lengths of 12 carbons ((dimethylaminododecyl methacrylate) DMADDM) and 16 carbons (dimethylaminohexadecyl methacrylate-DMAHDM) were obtained from the reactions of their respective organo-halides with the tertiary amine 2-(dimethylamino)ethyl methacrylate (DMAEMA). DMADDM and DMAHDM were incorporated into model composite in concentrations of 5 or 10%, resulting the following groups: G12.5 (DMADDM 5%), G12.10 (DMADDM 10%), G16.5 (DMAHDM 5%), G16.10 (DMAHDM 10%) and GC (control). Biofilm viability, lactic acid production and surface roughness were analysed 24h after samples preparation (initial), repeated after toothbrush abrasion and after polishing simulation. Data were submitted to ANOVA and Tukey's test (p≤0.05).

RESULTS

The longer the molecular chain size of QAS and the higher its concentration (G16.10), the lower was the viability and the production of lactic acid by the biofilm. No differences were detected in initial roughness' measurements among groups. However, after abrasion, there was an increase of biofilm viability and lactic acid production. Composites containing QAS presented rougher surfaces compared to the CG. After polishing, biofilm viability and surface roughness were statistically similar for all groups. Nevertheless, DMAHDM at 10% showed reduction in lactic acid production.

SIGNIFICANCE

Chain length and concentration of QAS influenced biofilm development and production of lactic acid. Longer chains and higher concentrations of QAS promoted better antimicrobial properties. Changes in surface texture caused by abrasion, decreased antibiofilm properties.

Cytotoxicity and the effect of cationic peptide fragments against cariogenic bacteria under planktonic and biofilm conditions

This study evaluated the cytotoxicity and effect of fragments derived from three oral cationic peptides (CP): LL-37, D6-17 and D1-23 against cariogenic bacteria under planktonic and biofilm conditions. For cytotoxicity analysis, two epithelial cell lines were used. The minimum inhibitory concentration and the minimal bactericidal concentration were determined for the CP fragments and the control (chlorhexidine-CHX) against cariogenic bacteria. The fractional inhibitory concentration was obtained for the combinations of CP fragments on Streptococcus mutans. Biofilm assays were conducted with the best antimicrobial CP fragment against S. mutans. The results indicated that D6-17 was not cytotoxic. D1-23, LL-37 and CHX were not cytotoxic in low concentrations. D1-23 presented the best bactericidal activity against S. mutans, S. mitis and S. salivarius. Combinations of CP fragments did not show a synergic effect. D1-23 presented a higher activity against S. mutans biofilm than CHX. It was concluded that D1-23 showed a substantial effect against cariogenic bacteria and low cytotoxicity.

Evaluation of Chair-Side Assays in High Microbiological Caries-Risk Subjects

The aim of this study was to evaluate the commercial chair-side assays Saliva-Check Mutans and ClinproTM Cario L-PopTM in high microbiological caries-risk dental students compared with conventional semi-quantitative colony counting culture-based technique as the reference method. Saliva samples from 93 subjects of both sexes aged 18-26 years were seeded (Köhler and Bratthall method) on plates containing SB-20M culture medium method and 12 subjects with high caries risk were selected. These 12 individuals were subjected to determination of caries risk using two commercial rapid detection chair-side assays (Saliva-Check Mutans and ClinproTM Cario L-PopTM) according to the manufacturers' instructions. The results were analyzed by the Kappa correlation test using SAS statistical software. There was a perfect agreement (Kappa=1) among the three caries risk evaluation methods - chair-side assays and semi-quantitative CFU count (control) - in all subjects. The results suggest that the commercial chair-side assays evaluated in this study may be practical and useful to identify high microbiological caries-risk subjects.

Thiazolidinedione-8 Alters Symbiotic Relationship in C. albicans-S. mutans Dual Species Biofilm

The small molecule, thiazolidinedione-8 (S-8) was shown to impair biofilm formation of various microbial pathogens, including the fungus Candida albicans and Streptococcus mutans. Previously, we have evaluated the specific molecular mode of S-8 action against C. albicans biofilm-associated pathogenicity. In this study we investigated the influence of S-8 on dual species, C. albicans-S. mutans biofilm. We show that in the presence of S-8 a reduction of the co-species biofilm formation occurred with a major effect on C. albicans. Biofilm biomass and exopolysaccharide (EPS) production were significantly reduced by S-8. Moreover, the agent caused oxidative stress associated with a strong induction of reactive oxygen species and hydrogen peroxide uptake inhibition by a mixed biofilm. In addition, S-8 altered symbiotic relationship between these species by a complex mechanism. Streptococcal genes associated with quorum sensing (QS) (comDE and luxS), EPS production (gtfBCD and gbpB), as well as genes related to protection against oxidative stress (nox and sodA) were markedly upregulated by S-8. In contrast, fungal genes related to hyphae formation (hwp1), adhesion (als3), hydrophobicity (csh1), and oxidative stress response (sod1, sod2, and cat1) were downregulated in the presence of S-8. In addition, ywp1 gene associated with yeast form of C. albicans was induced by S-8, which is correlated with appearance of mostly yeast cells in S-8 treated dual species biofilms. We concluded that S-8 disturbs symbiotic balance between C. albicans and S. mutans in dual species biofilm.