Studies on the transport pathway of PBCA nanoparticles in ocular tissues

Mucoadhesive and responsive nanogels as carriers for sustainable delivery of timolol for glaucoma therapy

Topical administration to the eye for the treatment of glaucoma is a convenient route because it increases the patient comfort. Timolol can efficiently diminish the intraocular pressure (IOP) of the eye; however the topical application as a solution of timolol maleate (TM) has poor therapeutic index and presents severe side effects. The encapsulation of timolol in nanomaterials has appeared as a technology to increase its residence time in the eye thus achieving a sustained release and consequently diminishing the doses of this drug and their number. The preparation of nanogels (NGs) based on N-isopropylacrylamide (NIPA) and acrylic acid (AAc), easily synthesized by precipitation/dispersion free radical polymerization, is reported in this paper. Such NGs presented excellent dispersability in eye simulated fluid and ideal size for topical application. NGs can load efficiently timolol through ionic interaction, and the in vitro release showed that NGs deliver timolol in a sustained manner. In vivo sustained efficacy of the NGs-timolol nanoformulations was demonstrated in rabbit's glaucoma model, in which the IOP could be diminished and maintained constant for 48 h with only one application. Overall, the synthesized NGs in combination with timolol have potential as drug delivery system for glaucoma therapy.

Evaluation of His6-Metal Assemblies as a Drug Delivery Vehicle in the Treatment of Anterior Segment Disease Using a Corneal Inflammation Model

Keratitis is a common ophthalmological disease and also a common cause of blindness (second only to cataracts). This disease is routinely treated by topical administration of dexamethasone sodium phosphate (Dexp). However, due to the presence of anatomical and physiological barriers, frequent administration is needed, often resulting in poor patient compliance and diverse side effects. In this work, Dexp was in situ encapsulated into a His₆-metal assembly (HmA) to generate Dexp@HmA, which was utilized in the ocular delivery of Dexp. The physicochemical properties of HmA and Dexp@HmA particles were characterized in detail using various techniques such as dynamic light scattering (DLS), scanning electron microscopy (SEM), and UV-vis spectroscopy. Compared to commercial Eudragi and reported PLGA nanoparticles, HmA showed higher encapsulation efficiency (EE%) and higher loading capacity (LC wt %) of Dexp. Dexp@HmA displayed pH-dependent release; after 33 days at pH 5.8, 6.5, and 7.2, 100%, 65%, and 42% of Dexp, respectively, had been released. In addition, HmA and Dexp@HmA showed low cytotoxicity to macrophages and to all common ocular cell types tested. The effect of Dexp@HmA on corneal inflammation was evaluated using in vitro and in vivo models. Our results demonstrate that Dexp@HmA is much superior to free Dexp in both in vitro and in vivo models. These positive results suggest that HmA may represent a promising candidate nanocarrier for the treatment of various diseases of the anterior segment of the eye.

Ocular Drug Delivery Barriers-Role of Nanocarriers in the Treatment of Anterior Segment Ocular Diseases

Ocular drug delivery is challenging due to the presence of anatomical and physiological barriers. These barriers can affect drug entry into the eye following multiple routes of administration (e.g., topical, systemic, and injectable). Topical administration in the form of eye drops is preferred for treating anterior segment diseases, as it is convenient and provides local delivery of drugs. Major concerns with topical delivery include poor drug absorption and low bioavailability. To improve the bioavailability of topically administered drugs, novel drug delivery systems are being investigated. Nanocarrier delivery systems demonstrate enhanced drug permeation and prolonged drug release. This review provides an overview of ocular barriers to anterior segment delivery, along with ways to overcome these barriers using nanocarrier systems. The disposition of nanocarriers following topical administration, their safety, toxicity and clinical trials involving nanocarrier systems are also discussed.

Nanoparticles for drug delivery to the anterior segment of the eye

Commercially available ocular drug delivery systems are effective but less efficacious to manage diseases/disorders of the anterior segment of the eye. Recent advances in nanotechnology and molecular biology offer a great opportunity for efficacious ocular drug delivery for the treatments of anterior segment diseases/disorders. Nanoparticles have been designed for preparing eye drops or injectable solutions to surmount ocular obstacles faced after administration. Better drug pharmacokinetics, pharmacodynamics, non-specific toxicity, immunogenicity, and biorecognition can be achieved to improve drug efficacy when drugs are loaded in the nanoparticles. Despite the fact that a number of review articles have been published at various points in the past regarding nanoparticles for drug delivery, there is not a review yet focusing on the development of nanoparticles for ocular drug delivery to the anterior segment of the eye. This review fills in the gap and summarizes the development of nanoparticles as drug carriers for improving the penetration and bioavailability of drugs to the anterior segment of the eye.

Nanotherapies for the treatment of ocular diseases

The topical route is the most frequent and preferred way to deliver drugs to the eye. Unfortunately, the very low ocular drug bioavailability (less than 5%) associated with this modality of administration, makes the efficient treatment of several ocular diseases a significant challenge. In the last decades, it has been shown that specific nanocarriers can interact with the ocular mucosa, thereby increasing the retention time of the associated drug onto the eye, as well as its permeability across the corneal and conjunctival epithelium. In this review, we comparatively analyze the mechanism of action and specific potential of the most studied nano-drug delivery carriers. In addition, we present the success achieved until now using a number of nanotherapies for the treatment of the most prevalent ocular pathologies, such as infections, inflammation, dry eye, glaucoma, and retinopathies.

Improvement in antihypertensive and antianginal effects of felodipine by enhanced absorption from PLGA nanoparticles optimized by factorial design

Objective of the present investigation was to enhance the bioavailability of felodipine by targeting the M cells of Peyer's patches using PLGA nanoparticles (NPs). Felodipine exhibits poor bioavailability due to limited aqueous solubility and extensive first pass metabolism. NPs were prepared using nanoprecipitation and optimized by 3(2) factorial design. Particle size (PS) and entrapment efficiency (% EE) were dependent on Drug/PLGA ratio (X1) and Pluronic F-68 (X2) concentration. % EE, PS and Zeta potential for optimized batch were 91.56±3.21%, 161.3±2.23 nm and -25.7±2.52 mV respectively. DSC, XRD and FTIR studies confirmed compatibility of PLGA and drug. TEM image confirmed the spherical shape. The in vitro and ex vivo studies using rat stomach and intestinal segment confirmed sustained release from NPs. Pharmacodynamic studies in rats showed control of blood pressure and ECG changes for extended duration. Hence, NPs can be a suitable alternative to the current available therapy in hypertension and angina by enhancing the bioavailability.

Full factorial design, physicochemical characterisation and biological assessment of cyclosporine A loaded cationic nanoparticles

Cyclosporine A loaded poly(lactide-co-glycolide) nanoparticles coated with chitosan were prepared using the o/w emulsification solvent evaporation method. A 2(3) full factorial design was used to investigate the effect of 3 preparation parameters on the particle size, polydispersity index, zeta potential and drug release. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the developed nanoparticles. Particle sizes varied from 156 nm to 314 nm, and polydispersity index values of 0.07-0.56 were obtained depending on the different preparation parameters. All nanoparticles showed positive zeta potential values. Nanoparticles prepared with the highest concentration chitosan retained a positive zeta potential after dispersion in simulated lachrymal fluid, which supports the possibility of an electrostatic interaction between these particles and the negatively charged mucus layer at the eye. The in vitro release profile of cyclosporine A from the chitosan-coated nanoparticles was strongly dependent on the release medium used. None of the cationic nanoparticle formulations showed significant cytotoxicity compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A encapsulated in the various nanoparticle formulations remained anti-inflammatory active as significant suppression of interleukine-2 secretion in concanavalin A stimulated Jurkat T cells was observed.

An overview on dry eye treatment: approaches for cyclosporin a delivery

Dry eye syndrome (DES, Keratoconjunctivitis sicca) is a common disorder of the tear film caused by decreased tear production or increased evaporation. Changes in tear composition also promote inflammation on the ocular surface by various mechanisms. Artificial tear drops, tear retention treatment, stimulation of tear secretion, or anti-inflammatory drugs may be used for dry eye treatment according to the severity of the disease. For untreated patients, the risk of ocular infection increases at considerable level and clinical course of the disease may proceed up to infection, corneal ulcer, and blindness. Artificial tears and/or punctual occlusions are used for tear replacement or preservation. New treatment approaches are designed to modify the underlying disease process. For the treatment of severe dry eye disease, cyclosporin A (CsA), the first one of the new generation immunomodulatory drugs, which has an anti-inflammatory effect, is frequently used. CsA has immunosuppressive effects following systemic application. Following local administration of CsA, it is expected to obtain effective drug concentration at the target area and to avoid the various side effects associated with systemic delivery. Microspheres, implants, and liposomes have been developed for administration of CsA subconjunctivally in order to enhance its efficiency.

Contact lenses in ocular therapeutics

Drug delivery is a difficult task in the field of ocular therapeutics. Owing to the physiological and anatomical constraints of the eye, it is difficult to obtain the correct therapeutic concentration of a drug at the required site of action. This has led to clinicians recommending frequent dosing, which has resulted in noncompliance by patients and decreased cost effectiveness. To overcome these barriers, scientists have explored novel ocular delivery systems, such as in situ gels, ocuserts, nanoparticles and liposomes. A particularly novel form of such a delivery system are contact lenses, which are thin, curved plastic disks that are designed to cover the cornea and which cling to the surface of the eye owing to surface tension. In this article, we describe the introductory literature on ocular delivery using contact lenses, their classification and manufacturing process, and recent advances on drug delivery techniques using such lenses.

Iron oxide nanoparticle-containing microbubble composites as contrast agents for MR and ultrasound dual-modality imaging

Magnetic resonance (MR) and ultrasound (US) imaging are widely used diagnostic modalities for various experimental and clinical applications. In this study, iron oxide nanoparticle-embedded polymeric microbubbles were designed as multi-modal contrast agents for hybrid MR-US imaging. These magnetic nano-in-micro imaging probes were prepared via a one-pot emulsion polymerization to form poly(butyl cyanoacrylate) microbubbles, along with the oil-in-water (O/W) encapsulation of iron oxide nanoparticles in the bubble shell. The nano-in-micro embedding strategy was validated using NMR and electron microscopy. These hybrid imaging agents exhibited strong contrast in US and an increased transversal relaxation rate in MR. Moreover, a significant increase in longitudinal and transversal relaxivities was observed after US-induced bubble destruction, which demonstrated triggerable MR imaging properties. Proof-of-principle in vivo experiments confirmed that these nanoparticle-embedded microbubble composites are suitable contrast agents for both MR and US imaging. In summary, these magnetic nano-in-micro hybrid materials are highly interesting systems for bimodal MR-US imaging, and their enhanced relaxivities upon US-induced destruction recommend them as potential vehicles for MR-guided US-mediated drug and gene delivery.

Ocular drug delivery - a look towards nanobioadhesives

IMPORTANCE OF THE FIELD

A major challenge emanating in the design of topical ophthalmic preparations is their short precorneal residence time. Retention of a drug delivery system in the front of the eye is thus desirable. One solution identified to address this concern is a retentive system that can preferably be delivered in a liquid drop form and ultimately remain attached to the corneal tissue owing to incorporation of a bioadhesive component. Forward-thinking approaches are required to achieve advancements in this approach for the attainment of an effective drug concentration at the site of action. Accordingly, several investigators have identified the benefits of nanotechnology-based drug delivery systems for ophthalmic drug delivery.

AREAS COVERED IN THIS REVIEW

A concerted effort was made to review critically all 'nanobioadhesives', that is, nanosystems designed for ocular drug delivery with the goal of attaining prolonged ocular retention, in a systematic, chronological manner, from their reported point of inception to the present.

WHAT THE READER WILL GAIN

A perspective on possible future trends in this growing field of ocular drug delivery is formulated.

TAKE HOME MESSAGE

The importance of and need for new developments in the field of ocular nanobioadhesives is emphasized.

Engineered nanomaterials: exposures, hazards, and risk prevention

Nanotechnology presents the possibility of revolutionizing many aspects of our lives. People in many settings (academic, small and large industrial, and the general public in industrialized nations) are either developing or using engineered nanomaterials (ENMs) or ENM-containing products. However, our understanding of the occupational, health and safety aspects of ENMs is still in its formative stage. A survey of the literature indicates the available information is incomplete, many of the early findings have not been independently verified, and some may have been over-interpreted. This review describes ENMs briefly, their application, the ENM workforce, the major routes of human exposure, some examples of uptake and adverse effects, what little has been reported on occupational exposure assessment, and approaches to minimize exposure and health hazards. These latter approaches include engineering controls such as fume hoods and personal protective equipment. Results showing the effectiveness - or lack thereof - of some of these controls are also included. This review is presented in the context of the Risk Assessment/Risk Management framework, as a paradigm to systematically work through issues regarding human health hazards of ENMs. Examples are discussed of current knowledge of nanoscale materials for each component of the Risk Assessment/Risk Management framework. Given the notable lack of information, current recommendations to minimize exposure and hazards are largely based on common sense, knowledge by analogy to ultrafine material toxicity, and general health and safety recommendations. This review may serve as an overview for health and safety personnel, management, and ENM workers to establish and maintain a safe work environment. Small start-up companies and research institutions with limited personnel or expertise in nanotechnology health and safety issues may find this review particularly useful.

Cyclosporine a-loaded solid lipid nanoparticles: ocular tolerance and in vivo drug release in rabbit eyes

PURPOSE

To determine the in vivo efficacy of cyclosporine A-loaded solid lipid nanoparticles (SLNs) in rabbit eyes.

METHODS

SLNs were prepared and administered to the cul-de-sac of rabbits, and the drug amount in aqueous humor was detected by high performance liquid chromatography (HPLC). The irritation was evaluated by modified Draize testing.

RESULTS

The particle size of SLNs was detected as 225.9 +/- 5.5 nm with a negative surface charge. Aqueous humor drug levels reached 50.53 ng/mL, and there was no serious irritation in rabbit eyes.

CONCLUSIONS

Topical ophthalmic efficacy of cyclosporine A was enhanced via administration of SLNs.

Chitosan nanoparticles for drug delivery to the eye

The purpose of this review is to provide the reader with an overview of the advances made in ocular delivery of bioactive molecules by means of chitosan-based nanosystems, and their potential relevance in clinical use. The studies described clearly emphasise that chitosan-based nanostructures are versatile systems that can be tailor-made according to required compositions, surface characteristics and particle size. Such parameters, which are known to influence their in vivo performance, can be modulated by adjusting the formulation conditions of the nanotechnologies responsible for their formation, by incorporating additional materials in the preparation steps, and/or by using synthetically modified chitosan. Moreover, this review illustrates how the advances achieved in the understanding of the interaction of nanosystems with the ocular structures should result in the coming years, logically, into challenging innovations in ocular nanomedicines with significant impact on clinical practice.

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs across barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.

Pharmaceutical applications of confocal laser scanning microscopy: the physical characterisation of pharmaceutical systems

The application of confocal laser scanning microscopy (CLSM) to the physicochemical characterisation of pharmaceutical systems is not as widespread as its application within the field of cell biology. However, methods have been developed to exploit the imaging capabilities of CLSM to study a wide range of pharmaceutical systems, including phase-separated polymers, colloidal systems, microspheres, pellets, tablets, film coatings, hydrophilic matrices, and chromatographic stationary phases. Additionally, methods to measure diffusion in gels, bioadhesives, and for monitoring microenvironmental pH change within dosage forms have been utilised. CLSM has also been used in the study of the physical interaction of dosage forms with biological barriers such as the eye, skin and intestinal epithelia, and in particular, to determine the effectiveness of a plethora of pharmaceutical systems to deliver drugs through these barriers. In the future, there is continuing scope for wider exploitation of existing techniques, and continuing advancements in instrumentation.

In situ-forming hydrogels for sustained ophthalmic drug delivery

Ophthalmic drug delivery is one of the most interesting and challenging endeavors facing the pharmaceutical scientist. The conventional ocular drug delivery systems like solutions, suspensions, and ointments show drawbacks such as increased precorneal elimination, high variability in efficiency, and blurred vision respectively. In situ-forming hydrogels are liquid upon instillation and undergo phase transition in the ocular cul-de-sac to form visco-elastic gel and this provides a response to environmental changes. In the past few years, an impressive number of novel temperature, pH, and ion induced in situ-forming systems have been reported for sustain ophthalmic drug delivery. Each system has its own advantages and drawbacks. The choice of a particular hydrogel depends on its intrinsic properties and envisaged therapeutic use. This review includes various temperature, pH, and ion induced in situ-forming polymeric systems used to achieve prolonged contact time of drugs with the cornea and increase their bioavailability.

Flurbiprofen loaded biodegradable nanoparticles for ophtalmic administration

Poly(lactic/glycolic) acid nanoparticles incorporating flurbiprofen (FB) were prepared by the solvent displacement technique using poloxamer 188 as a stabilizer to improve the availability of the drug for the prevention of the inflammation caused by ocular surgery. A 2(3) + star design was applied to investigate the influence of several factors such as the pH of the aqueous phase, the initial concentration of the stabilizer, and the drug used to prepare the nanoparticles (NPs) on the physicochemical properties (particle size analysis, zeta potential, and drug loading efficiency) of the colloidal system. The best formulations were those prepared at pH 3.5 with a concentration of 1.5 mg/mL of FB and 10 or 20 mg/mL of poloxamer 188. These formulations showed an appropriate average size for ophthalmic administration (232.8 and 277.6 nm, respectively) and a good yield of entrapment efficiency (94.60% and 93.55%, respectively). The release behavior of FB from the developed NPs was complete and exhibited a biphasic pattern. Formulations did not show toxicity on ocular tissues. In vivo anti-inflammatory efficacy was assessed in the rabbit eye after topical instillation of sodium arachidonate (SA). A higher decrease of the SA-induced inflammation was obtained for the NP formulations.

Nanoencapsulation II. Biomedical applications and current status of peptide and protein nanoparticulate delivery systems

The concept of polymeric nanoparticles for the design of new drug delivery systems emerged a few years ago, and recent rapid advances in nanotechnology have offered a wealth of new opportunities for diagnosis and therapy of various diseases. Recent progress has made possible the engineering of nanoparticles to allow the site-specific delivery of drugs and to improve the pharmacokinetic profile of numerous compounds with biomedical applications such as peptide and protein drugs. Biologically active peptides and their analogues are becoming an increasingly important class of drugs. Their use for human and animal treatment is problematic, however, because some of these drugs are generally ineffective when taken orally and thus have been administered chiefly by the parenteral route. This review covers some of the historical and recent advances of nanotechnology and concludes that polymeric nanoparticles show great promise as a tool for the development of peptide drug delivery systems.

Cationic vectors in ocular drug delivery

Despite extensive research in the field, the major problem in the ocular drug delivery domain still is rapid precorneal drug loss and poor corneal permeability. One of the approaches recently developed is the drug incorporation into cationic submicronic vectors which exploit the negative charges present at the corneal surface for increased residence time and penetration. This review will focus on the formulation of three main representative cationic colloids developed for ophthalmic delivery: liposomes, emulsions and nanoparticles (NP). Parameters such as choice of the vector type and size, nature of the cationic molecule, pH and ionic strength of the external phase and characteristics of the encapsulated drug will be discussed with accent on the relevance of the positive charge.

The influence of the use of viscosifying agents as dispersion media on the drug release properties from PLGA nanoparticles

Poly(lactide-co-glycolide) nanoparticles incorporating ciprofloxacin HCl were prepared by means of a W/O/W emulsification solvent evaporation method. The physicochemical properties of these particles were evaluated by measuring particle size, zeta potential and drug loading efficiency. Gamma-sterilised nanoparticles were dispersed in different isoviscous polymer solutions, commonly used as vehicles in eye drops. The influence of gamma-irradiation of the viscosifying agents on the drug release properties of the dispersed nanoparticles was evaluated with respect to release in mannitol solution. The viscosity of the polymer solutions prepared was measured by flow rheometry and thereby the influence of temperature and sterilisation by autoclaving on viscosity was examined. Before and after freeze-drying and subsequent sterilisation by gamma-irradiation, the polymer solutions were also characterised by dynamic stress sweep and dynamic frequency sweep oscillation measurements to deduce possible structural changes. A possible relationship between the differences in ciprofloxacin release from the nanoparticles suspended in the various media and the network structure or rheological behaviour of the polymers was investigated.

Visualization of skin penetration using confocal laser scanning microscopy

The use of skin as an alternative route for administering systemically active drugs has attracted considerable interest in recent years. However, the skin provides an excellent barrier, which limits the number of drug molecules suitable for transdermal delivery. Thus, in order to improve cutaneous delivery, it is necessary to adopt an enhancement method, either (i) passively using novel formulations, e.g. microemulsions, liposomes, and colloidal polymeric suspensions, or more conventional skin permeation enhancers, or (ii) with a physical approach, such as, iontophoresis, sonophoresis or electroporation. Although there has been much progress, the precise modes of action of the different techniques used are far from well-understood. The objective of this review, therefore, is to evaluate how confocal laser scanning microscopy may contribute to the determination of the mechanisms of diverse skin penetration enhancement strategies.

Cyclosporine A delivery to the eye: a pharmaceutical challenge

Systemic administration of cyclosporine A (CsA) is commonly used in the treatment of local ophthalmic conditions involving cytokines, such as corneal graft rejection, autoimmune uveitis and dry eye syndrome. Local administration is expected to avoid the various side effects associated with systemic delivery. However, the currently available systems using oils to deliver CsA topically are poorly tolerated and provide a low bioavailability. These difficulties may be overcome through formulations aimed at improving CsA water solubility (e.g. cyclodextrins), or those designed to facilitate tissue drug penetration using penetration enhancers. The use of colloidal carriers (micelles, emulsions, liposomes and nanoparticles) as well as the approach using hydrosoluble prodrugs of CsA have shown promising results. Solid devices such as shields and particles of collagen have been investigated to enhance retention time on the eye surface. Some of these topical formulations have shown efficacy in the treatment of extraocular diseases but were inefficient at reaching intraocular targets. Microspheres, implants and liposomes have been developed to be directly administered subconjunctivally or intravitreally in order to enhance CsA concentration in the vitreous. Although progress has been made, there is still room for improvement in CsA ocular application, as none of these formulations is ideal.

Factorial design, physicochemical characterisation and activity of ciprofloxacin-PLGA nanoparticles

Poly(lactide-co-glycolide) nanoparticles incorporating ciprofloxacin HCl were prepared by means of a W/O/W emulsification solvent evaporation method. The stabiliser selected was poly(vinylalcohol). A 2(4) full factorial design based on four independent variables was used to plan the experiments and the variable parameters were the number of homogenisation cycles, addition of boric acid to the inner water phase containing the drug, ciprofloxacin concentration in the inner water phase and oil:outer water phase ratio. The effects of these parameters on the particle size, zeta potential, drug loading efficiency and drug release were investigated. Also the effect of gamma irradiation on the particle size and drug release was evaluated and DSC and XRD analyses of the compounds and the nanoparticles were performed. The activity on two series of microorganisms, Pseudomonas aeruginosa and Staphylococcus aureus, was examined.

Vesicular systems in ocular drug delivery: an overview

The main aim of pharmacotherapeutics is the attainment of effective drug concentration at the intended site of action for a sufficient period of time to elicit a response. Poor bioavailability of drugs from ocular dosage form is mainly due to the tear production, non-productive absorption, transient residence time, and impermeability of corneal epithelium. Though the topical and localized application are still an acceptable and preferred way to achieve therapeutic level of drugs used to treat ocular disorders but the primitive ophthalmic solution, suspension, and ointment dosage form are no longer sufficient to combat various ocular diseases. This article reviews the constraints with conventional ocular therapy and explores various novel approaches, in general, to improve ocular bioavailability of the drugs, advantages of vesicular approach over these and the future challenges to render the vesicular system more effective.

Preparation and evaluation of drug-loaded gelatin nanoparticles for topical ophthalmic use

Gelatin nanoparticles encapsulating pilocarpine HCl or hydrocortisone as model drugs were produced using a desolvation method. The influence of a number of preparation parameters on the particle properties was investigated. For the pilocarpine HCl-loaded spheres, an influence of the pH during particle preparation on the size was observed. Slightly negative zeta potential values were measured for all samples. In the case of pilocarpine HCl-loaded spheres, no influence of the gelatin type or the pH level was observed, which could be attributed to the shielding effect of ions present in the dispersion medium. When hydrocortisone was entrapped, a difference in zeta potential value between gelatin type A and gelatin type B particles was measured. A high pilocarpine HCl entrapment was established. Hydrocortisone was complexed with cyclodextrins in order to increase its aqueous solubility. The drug encapsulation was lower than in the case of pilocarpine HCl, but still amounted to approximately 30-40%. Compared to the aqueous drug solutions, a sustained release for both drugs was observed. The release kinetics of pilocarpine HCl are close to zero order, and no significant differences were measured between the various preparations. In the case of hydrocortisone, the release data suggests a difference in release rate depending on the type of cyclodextrin employed.

The potential of chitosan in ocular drug delivery

This paper presents an overview of the potential of chitosan-based systems for improving the retention and biodistribution of drugs applied topically onto the eye. Besides its low toxicity and good ocular tolerance, chitosan exhibits favourable biological behaviour, such as bioadhesion- and permeability-enhancing properties, and also interesting physico-chemical characteristics, which make it a unique material for the design of ocular drug delivery vehicles. The review summarizes the techniques for the production of chitosan gels, chitosan-coated colloidal systems and chitosan nanoparticles, and describes their mechanism of action upon contact with the ocular mucosa. The results reported until now have provided evidence of the potential of chitosan gels for enhancing and prolonging the retention of drugs on the eye surface. On the other hand, chitosan-based colloidal systems were found to work as transmucosal drug carriers, either facilitating the transport of drugs to the inner eye (chitosan-coated colloidal systems containing indometacin) or their accumulation into the corneal/conjunctival epithelia (chitosan nanoparticles containing ciclosporin). Finally, the tolerance, toxicity and biodegradation of the carriers under evaluation were reviewed.

Poly(alkylcyanoacrylates) as biodegradable materials for biomedical applications

This review considers the use of poly(alkylcyanoacrylates) (PACAs) as biomedical materials. We first present the different aspects of the polymerization of alkylcyanoacrylate monomers and briefly discuss their applications as skin adhesives, surgical glues and embolitic materials. An extensive review of the developments and applications of PACAs as nanoparticles for the delivery of drugs is then given. The methods of preparation of the nanoparticles are presented and considerations concerning the degradation, in vivo distribution, toxicity and cytotoxicity of the nanoparticles are discussed. The different therapeutic applications are presented according to the route of administration of the nanoparticles and include the most recent developments in the field.

Biocompatible stabilizers in the preparation of PLGA nanoparticles: a factorial design study

Poly(lactic-co-glycolic-acid) nanoparticles are often produced using the w/o/w emulsification solvent evaporation method. In most cases poly(vinyl alcohol) (PVA) is used as stabilizer of the emulsion. The goal of this study was to compare a series of polymers to PVA in a 2(2) full factorial design study. The influence of the concentration of PVA and the polymers tested on particle size and zeta potential value was evaluated before and after freeze-drying of the prepared particles. Nanoparticles were obtained with most polymers when they were used in combination with PVA. Leaving PVA out of the formulation, however, increased the size of the particles over 1 microm. Two exceptions are poloxamer and carbopol, which can be considered as valuable alternatives to PVA. Zeta potential values were usually slightly negative, the most extreme zeta potential values were measured when poloxamer and carbopol were employed. The use of gelatin type A made it possible to achieve positive values. The original 2(2) full factorial design study was further expanded to a central composite design for poloxamer and carbopol, in order to fit the measured data to a quadratic model and to calculate response surfaces.

Ocular tolerability and in vivo bioavailability of poly(ethylene glycol) (PEG)-coated polyethyl-2-cyanoacrylate nanosphere-encapsulated acyclovir

Acyclovir-loaded polyethyl-2-cyanoacrylate (PECA) nanospheres were prepared by an emulsion polymerization process in the micellar phase and characterized. The influence of the presence of nonionic surfactant as well as other substances [i.e., 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) and poly(ethylene glycol) (PEG)], on formulation parameters and loading capacity was investigated. In particular, the presence of PEG resulted in an increase of mean size and size distribution. To obtain PEG-coated PECA nanospheres with a mean size of < 200 nm, Pluronic F68 at concentrations > 1.5% (w/v) should be used during preparation. The presence of PEG also resulted in a change in zeta potential, from -25.9 mV for uncoated nanospheres to -12.2 mV for PEG-coated PECA nanospheres. The presence of HP-beta-CyD elicited an increase of nanosphere size and size distribution, but zeta potential was not influenced. In vitro drug release from nanospheres was determined in both phosphate buffer (pH 7.4) and plasma. The presence of HP-beta-CyD and PEG did not influence the acyclovir release rate in plasma. In the case of release in phosphate buffer, PEG-coated nanospheres showed a slower release. Ocular tolerability of PEG-coated PECA nanospheres was evaluated by the in vivo Draize test. This colloidal carrier was well tolerated, eliciting no particular inflammation at the level of the various ocular structures. In vivo ocular bioavailability was evaluated by instilling 50 microL of the acyclovir-loaded nanospheres only once in the conjunctival sac of rabbit eyes. At various time intervals, aqueous humour acyclovir content was determined by high-performance liquid chromatography. Acyclovir-loaded PEG-coated PECA nanospheres were compared with an aqueous solution of the drug and a physical mixture of acyclovir nanospheres. The acyclovir-loaded PEG-coated PECA nanospheres showed a significant (p < 0.001) increase of drug levels (25-fold) in aqueous humor compared with the free drug or the physical mixture. This finding is probably due to an improved ocular mucoadhesion of PEG-coated PECA nanospheres.

Ophthalmic drug delivery systems--recent advances

Eye-drops are the conventional dosage forms that account for 90% of currently accessible ophthalmic formulations. Despite the excellent acceptance by patients, one of the major problems encountered is rapid precorneal drug loss. To improve ocular drug bioavailability, there is a significant effort directed towards new drug delivery systems for ophthalmic administration. This chapter will focus on three representative areas of ophthalmic drug delivery systems: polymeric gels, colloidal systems, cyclodextrins and collagen shields. Hydrogels generally offer a moderate improvement of ocular drug bioavailability with the disadvantage of blurring of vision. In situ activated gel-forming systems are preferred as they can be delivered in drop form with sustained release properties. Colloidal systems including liposomes and nanoparticles have the convenience of a drop, which is able to maintain drug activity at its site of action and is suitable for poorly water-soluble drugs. Among the new therapeutic approaches in ophthalmology, cyclodextrins represent an alternative approach to increase the solubility of the drug in solution and to increase corneal permeability. Finally, collagen shields have been developed as a new continuous-delivery system for drugs that provide high and sustained levels of drugs to the cornea, despite a problem of tolerance. It seems that new tendency of research in ophthalmic drug delivery systems is directed towards a combination of several drug delivery technologies. There is a tendency to develop systems which not only prolong the contact time of the vehicle at the ocular surface, but which at the same time slow down the elimination of the drug. Combination of drug delivery systems could open a new directive for improving results and the therapeutic response of non-efficacious systems.