Homeobox genes and orofacial development

Sex and ancestry patterning of residual correlations in human dental development: Cooperative genetic interaction and phenotypic plasticity

OBJECTIVES

Most research in human dental age estimation has focused on point estimates of age, and most research on dental development theories has focused on morphology or eruption. Correlations between developing teeth using ordinal staging have received less attention. The effect of demographic variables on these correlations is unknown. I tested the effect of reference sample demographic variables on the residual correlation matrix using the lens of cooperative genetic interaction (CGI).

MATERIALS AND METHODS

The sample consisted of Moorrees et al., Journal of Dental Research, 1963, 42, 1490-1502, scores of left mandibular permanent teeth from panoramic radiographs of 880 London children 3-22.99 years of age stratified by year of age, sex, and Bangladeshi or European ancestry. A multivariate cumulative probit model was fit to each sex/ancestry group (n = 220), each sex or ancestry (n = 440), and all individuals (n = 880). Residual correlation matrices from nine reference sample configurations were compared using Bartlett's tests of between-sample difference matrices against the identity matrix, hierarchical cluster analysis, and dendrogram cophenetic correlations.

RESULTS

Bartlett's test results were inconclusive. Cluster analysis showed clustering by tooth class, position within class, and developmental timing. Clustering patterns and dendrogram correlations showed similarity by sex but not ancestry.

DISCUSSION

Expectations of CGI were supported for developmental staging. This supports using CGI as a model for explaining patterns of variation within the dentition. Sex was found to produce consistent patterns of dental correlations, whereas ancestry did not. Clustering by timing of development supports phenotypic plasticity in the dentition and suggests shared environment over genetic ancestry to explain population differences.

A tooth crown morphology framework for interpreting the diversity of primate dentitions

Variation in tooth crown morphology plays a crucial role in species diagnoses, phylogenetic inference, and the reconstruction of the evolutionary history of the primate clade. While a growing number of studies have identified developmental mechanisms linked to tooth size and cusp patterning in mammalian crown morphology, it is unclear (1) to what degree these are applicable across primates and (2) which additional developmental mechanisms should be recognized as playing important roles in odontogenesis. From detailed observations of lower molar enamel-dentine junction morphology from taxa representing the major primate clades, we outline multiple phylogenetic and developmental components responsible for crown patterning, and formulate a tooth crown morphology framework for the holistic interpretation of primate crown morphology. We suggest that adopting this framework is crucial for the characterization of tooth morphology in studies of dental development, discrete trait analysis, and systematics.

Genetic Factors of Teeth Impaction: Polymorphic and Haplotype Variants of PAX9, MSX1, AXIN2, and IRF6 Genes

In recent research, there has been a growing awareness of the role of genetic factors in the positioning and eruption of teeth in the maxilla and mandible. This study aimed to evaluate the potential of specific polymorphic markers of single nucleotide polymorphisms (SNPs) located within the PAX9, MSX1, AXIN2, and IRF6 genes to determine the predisposition to tooth impaction. The study participants were divided into two groups: the first group consisted of individuals with at least one impacted secondary tooth. In contrast, the second group (control group) had no impacted teeth in their jaws. To analyze the genes, real-time PCR (polymerase chain reaction) and TaqMan probes were utilized to detect the selected polymorphisms. The findings suggest that disruptions in the structure and function of the mentioned genetic factors such as polymorphic and haplotype variants of PAX9, MSX1, AXIN2, and IRF6 genes, which play a direct role in tooth and periodontal tissue development, might be significant factors in tooth impaction in individuals with genetic variations. Therefore, it is reasonable to hypothesize that tooth impaction may be influenced, at least in part, by the presence of specific genetic markers, including different allelic variants of the PAX9, AXIN2, and IRF6 genes, and especially MSX1.

Patterns of nonsyndromic tooth agenesis and sexual dimorphism

BACKGROUND

Sex dimorphism has been implicated in oral health differences and the pathogenesis of oral diseases, such as tooth agenesis, periodontal disease, dental caries, and tooth loss. Tooth agenesis (TA) is one of the most common developmental anomalies in humans, and its prevalence and patterns are different across ethnic groups. The aim of this study was to investigate the phenotypes and sex-associated patterns of nonsyndromic tooth agenesis (TA) in Thai dental patients.

METHODS

One thousand ninety panoramic radiographs were examined. One hundred and one subjects (37 males, 64 females, 15-20 years-old) with nonsyndromic TA were evaluated. Differences in TA prevalence between groups were analyzed using the chi-square or Fisher exact test.

RESULTS

The TA prevalence, excluding third molars, was 9.3% and more frequently found in the mandible compared with the maxilla. The maxilla demonstrated a higher prevalence of first premolar agenesis than the mandible (P = 0.012), while the mandible had a higher prevalence of second premolar agenesis than the maxilla (P = 0.031). There were significantly more males missing one tooth than females, however, there were more females missing two or more teeth than males (P = 0.042). A missing maxillary left lateral incisor was significantly more frequent in males (P = 0.019), while a missing mandibular right lateral incisor was more frequent in females (P = 0.025). In females, the pattern of two mandibular lateral incisors agenesis was the most common and significantly present in females more than males (P = 0.015). In contrast, the pattern of one mandibular left lateral incisor agenesis was only observed in males and significantly found in males more than females (P = 0.047).

CONCLUSIONS

We demonstrate sex-associated differences in nonsyndromic tooth agenesis. The prevalence of single tooth agenesis was higher in males, while that of two or more teeth agenesis was higher in females. We found different patterns of lateral incisor agenesis between males and females.

Genetic and Morphological Variation in Hypodontia of Maxillary Lateral Incisors

(1) Background: Hypodontia has a multifactorial aetiology, in which genetic factors are a major component. Associated with this congenital absence, the formed teeth may show differences in size and shape, which may vary with the specific genetic variants and with the location of the missing teeth. The aims of the present study were to investigate a specific variant of MSX1, derive morphometric tooth measurements in a sample of patients with isolated maxillary lateral incisor agenesis and matched controls, and model the findings. (2) Methods: Genotyping of the MSX1 rs8670 genetic variant and morphometric measurements with a 2D image analysis method were performed for 26 hypodontia patients and 26 matched controls. (3) Results: The risk of upper lateral incisor agenesis was 6.9 times higher when the T allele was present. The morphometric parameters showed significant differences between hypodontia patients and controls and between the unilateral and bilateral agenesis cases. The most affected crown dimension in the hypodontia patients was the bucco-lingual dimension. In crown shape there was significant variation the Carabelli trait in upper first molars. (4) Conclusions: The MSX1 rs8670 variant was associated with variations in morphological outcomes. The new findings for compensatory interactions between the maxillary incisors indicate that epigenetic and environmental factors interact with this genetic variant. A single-level directional complex interactive network model incorporates the variations seen in this study.

Near-chromosomal de novo assembly of Bengal tiger genome reveals genetic hallmarks of apex predation

The tiger, a poster child for conservation, remains an endangered apex predator. Continued survival and recovery will require a comprehensive understanding of genetic diversity and the use of such information for population management. A high-quality tiger genome assembly will be an important tool for conservation genetics, especially for the Indian tiger, the most abundant subspecies in the wild. Here, we present high-quality near-chromosomal genome assemblies of a female and a male wild Indian tiger (Panthera tigris tigris). Our assemblies had a scaffold N50 of >140 Mb, with 19  scaffolds corresponding to the 19 numbered chromosomes, containing 95% of the genome. Our assemblies also enabled detection of longer stretches of runs of homozygosity compared to previous assemblies, which will help improve estimates of genomic inbreeding. Comprehensive genome annotation identified 26,068 protein-coding genes, including several gene families involved in key morphological features such as the teeth, claws, vision, olfaction, taste, and body stripes. We also identified 301 microRNAs, 365 small nucleolar RNAs, 632 transfer RNAs, and other noncoding RNA elements, several of which are predicted to regulate key biological pathways that likely contribute to the tiger's apex predatory traits. We identify signatures of positive selection in the tiger genome that are consistent with the Panthera lineage. Our high-quality genome will enable use of noninvasive samples for comprehensive assessment of genetic diversity, thus supporting effective conservation and management of wild tiger populations.

Domestic cat embryos reveal unique transcriptomes of developing incisor, canine, and premolar teeth

Division of the dentition into morphologically distinct classes of teeth (incisors, canines, premolars, and molars) and the acquisition of tribosphenic molars facilitated precise occlusion between the teeth early in mammal evolution. Despite the evolutionary and ecological importance of distinct classes of teeth with unique cusp, crest, and basin morphologies, relatively little is known about the genetic basis for the development of different tooth classes within the embryo. Here we investigated genetic differences between developing deciduous incisor, canine, and premolar teeth in the domestic cat (Felis catus), which we propose to be a new model for tooth development. We examined differences in both developmental timing and crown morphology between the three tooth classes. Using RNA sequencing of early bell stage tooth germs, we showed that each of the three deciduous tooth classes possess a unique transcriptional profile. Three notable groups of genes emerged from our differential expression analysis; genes involved in the extracellular matrix (ECM), Wnt pathway signaling, and members of multiple homeobox gene families (Lhx, Dlx, Alx, and Nkx). Our results suggest that ECM genes may play a previously under-appreciated role in shaping the surface of the tooth crown during development. Differential regulation of these genes likely underlies differences in tooth crown shape and size, although subtle temporal differences in development between the tooth germs could also be responsible. This study provides foundational data for future experiments to examine the function of these candidate genes in tooth development to directly test their potential effects on crown morphology.

Genetic, Epigenetic and Environmental Factors Influence the Phenotype of Tooth Number, Size and Shape: Anterior Maxillary Supernumeraries and the Morphology of Mandibular Incisors

The aim of this study is to investigate whether the genetic, epigenetic and environmental factors that give rise to supernumeraries in the maxillary incisor region and larger dimensions of the adjacent maxillary incisors are also associated with variations in the morphology of the mandibular incisors. If so, this would contribute to understanding the distribution and interactions of factors during dental development and how these can be modelled. The sample consisted of 34 patients with supernumerary teeth in the maxillary anterior region, matched for gender, age and White Caucasian ethnicity with 34 control subjects. The average ages of the supernumerary and control groups were 12.8 and 12.2 years, respectively. Study models of all subjects were constructed and imaged using a previously validated system. Using custom software, each of the mandibular incisor teeth were measured to obtain 17 parameters from the labial view and 17 from the occlusal view. Principal component analysis (PCA) was used to summarize the measurements into a smaller set representing distinct features of the clinical crowns, followed by a comparison between the supernumerary and control groups using 2-way ANOVA. Seven factors of tooth size of the mandibular central incisors and six factors of the mandibular lateral incisors were identified as major features of the clinical crowns. All parameters of both mandibular incisors were greater in the supernumerary group than in the control, with three of these, located in the incisal and cervical regions of the mandibular lateral incisors, being statistically significantly larger. The findings of this study indicate that the aetiological factors associated with supernumerary teeth in the maxillary anterior region also affect tooth crown dimensions of mandibular incisors. This new evidence enhances several models of the interactions of genetic, epigenetic and environmental components of dental development and supports a multi-model approach to increase understanding of this process and its variations.

An initial investigation of dental morphology variation among three southern Naga ethnic groups of Northeast India

OBJECTIVES

This study examines dental morphology trait prevalence among three southern Naga groups and compares them to 10 ethnic groups from other regions of South Asia to accomplish two objectives: assess the biological relationship of these Tibeto-Burman-speakers to speakers of non-Tibeto-Burman languages in other South Asian regions, and determine which traits distinguish northeast Indians from other South Asians.

METHODS

Dental morphology traits were scored with the Arizona State University Dental Anthropology System. Tooth-trait combinations were evaluated for significant inter-trait correlation and intra-trait correspondence within dental fields. Comparisons were based on simple trait prevalence and with Smith's MMD. Affinities based on the former were accomplished with correspondence analysis and principal components analysis. Affinities based on the latter were undertaken with neighbor-joining cluster analysis and multidimensional scaling.

RESULTS

After elimination due to inter-trait correlations and uniform prevalence, biodistances based on the remaining 17 tooth-trait combinations identify significant differences between northeast Indians and other South Asian ethnic groups due to high frequencies of shoveling on the maxillary incisors and Cusp 6 on the mandibular molars coupled with low frequencies of Carabelli's trait and Cusp 5 on UM1 and UM2, respectively.

CONCLUSIONS

Patterns of biodistances obtained from dental morphology are consilient with those obtained from DNA indicating statistically significant differences between northeast Indians from members of ethnic groups of other regions of South Asia. Researchers should explore the sex-specific patterns. Biodistances should not be limited to "key" teeth within dental fields, for in almost every case traits present on mesial and distal teeth yield non-redundant information.

The Human Genetics of Dental Anomalies

The development of tooth is a highly complex procedure and mastered by specific genetic programs. Genetic alterations, environmental factors, and developmental timing can disturb the execution of these programs, and result in various dental anomalies like hypodontia/oligodontia, and supernumerary teeth, which are commonly seen in our clinical practice. Advances in molecular research enabled the identification of various genes involved in the pathogenesis of dental anomalies. In the near future, it will help provide a more accurate diagnosis and biological-based treatment for these anomalies. In this article, we present the molecular phenomenon of tooth development and the genetics of various dental anomalies.

The genetic architecture of anterior tooth morphology in a longitudinal sample of Australian twins and families

OBJECTIVE

This study presents a quantitative genetic analysis of human anterior dental morphology in a longitudinal sample of known genealogy. The primary aim of this work is to generate a suite of genetic correlations within and between deciduous and permanent characters to access patterns of integration across the diphyodont dental complex.

DESIGN

Data were recorded from casted tooth crowns representing participants of a long-term Australian twin and family study (deciduous n = 290, permanent n = 339). Morphological trait expression was observed and scored following Arizona State University Dental Anthropology System standards. Bivariate genetic correlations were estimated using maximum likelihood variance decomposition models in SOLAR v.8.1.1.

RESULTS

Genetic correlation estimates indicate high levels of integration between antimeres but low to moderate levels among traits within a tooth row. Only 9% of deciduous model comparisons were significant, while pleiotropy was indicated for one third of permanent trait pairs. Canine characters stood out as strongly integrated, especially in the deciduous dentition. For homologous characters across dentitions (e.g., deciduous i¹ shoveling and permanent I¹ shoveling), ∼70% of model comparisons yielded significant genetic correlations.

CONCLUSIONS

Patterns of genetic correlation suggest a morphological canine module that spans the primary and secondary dentition. Results also point to the existence of a genetic mechanism conserving morphology across the diphyodont dental complex, such that paired deciduous and permanent traits are more strongly integrated than characters within individual tooth rows/teeth.

Association of Polymorphic and Haplotype Variants of the MSX1 Gene and the Impacted Teeth Phenomenon

It is known that genetic factors determine odontogenesis; furthermore, studies have revealed that various genes in humans can regulate the development of different types and generations of teeth. In this study it has been assumed that tooth impaction—at least to some extent—also depends on the presence of specific genetic markers, especially allelic variants of the MSX1 gene. The primary objective of the study was to evaluate the suitability of selected molecular markers located within the MSX1 gene for the determination of the risk of tooth impaction in particular patients. The study participants were divided into two groups: (1) the study group—at least one secondary tooth was impacted in the jaws; (2) the control group—no impacted tooth in the jaws. Real-Time PCR and TaqMan probes were used to detect selected polymorphisms in the analyzed genes. Two single nucleotide polymorphisms of MSX1 were analyzed. After the two subgroups of patients were distinguished in the study group based on the number of impacted teeth, statistically significant differences in the frequency of genotypes described for rs12532 in the MSX1 gene were found.

Genetics of Dentofacial and Orthodontic Abnormalities

The development of craniofacial complex and dental structures is a complex and delicate process guided by specific genetic mechanisms. Genetic and environmental factors can influence the execution of these mechanisms and result in abnormalities. An insight into the mechanisms and genes involved in the development of orofacial and dental structures has gradually gained by pedigree analysis of families and twin studies as well as experimental studies on vertebrate models. The development of novel treatment techniques depends on in-depth knowledge of the various molecular or cellular processes and genes involved in the development of the orofacial complex. This review article focuses on the role of genes in the development of nonsyndromic orofacial, dentofacial variations, malocclusions, excluding cleft lip palate, and the advancements in the field of molecular genetics and its application to obtain better treatment outcomes.

Oral and Palatal Dentition of Axolotl Arises From a Common Tooth-Competent Zone Along the Ecto-Endodermal Boundary

Vertebrate dentitions arise at various places within the oropharyngeal cavity including the jaws, the palate, or the pharynx. These dentitions develop in a highly organized way, where new tooth germs are progressively added adjacent to the initiator center, the first tooth. At the same time, the places where dentitions develop house the contact zones between the outer ectoderm and the inner endoderm, and this colocalization has instigated various suggestions on the roles of germ layers for tooth initiation and development. Here, we study development of the axolotl dentition, which is a complex of five pairs of tooth fields arranged into the typically tetrapod outer and inner dental arcades. By tracking the expression patterns of odontogenic genes, we reason that teeth of both dental arcades originate from common tooth-competent zones, one present on the mouth roof and one on the mouth floor. Progressive compartmentalization of these zones and a simultaneous addition of new tooth germs distinct for each prospective tooth field subsequently control the final shape and composition of the axolotl dentition. Interestingly, by following the fate of the GFP-labeled oral ectoderm, we further show that, in three out of five tooth field pairs, the first tooth develops right at the ecto-endodermal boundary. Our results thus indicate that a single tooth-competent zone gives rise to both dental arcades of a complex tetrapod dentition. Further, we propose that the ecto-endodermal boundary running through this zone should be accounted for as a potential source of instruction factors instigating the onset of the odontogenic program.

Testing the inhibitory cascade model in the Middle Pleistocene Sima de los Huesos (Sierra de Atapuerca, Spain) hominin sample

The Middle Pleistocene Sima de los Huesos (SH) site has yielded more than 7.500 human fossil remains belonging to a minimum of 29 individuals. Most of these individuals preserve either the complete mandibular molar series or at least the first (M₁ ) and second (M₂ ) molars. The inhibitory cascade mathematical model was proposed by Kavanagh et al. (Nature, 449, 427-433 [2007]) after their experimental studies on the dental development of murine rodent species. The activator-inhibitor mechanism of this model has shown its ability for predicting evolutionary size patterns of mammalian teeth, including hominins. The main aim of this study is to test whether the size molar patterns observed in the SH hominins fit the inhibitory cascade model. With this purpose, we have measured the crown area of all SH molars in photographs, using a planimeter and following techniques used and well contrasted in previous works. Following one of the premises of the inhibitory cascade model, we expect that the central tooth (M₂ in our case) of a triplet would have the average size of the two outer teeth. The absolute difference between the observed and the expected values for the M₂ s ranges from 0.23 to 8.46 mm² in the SH sample. In terms of percentage, the difference ranges between 0.25% and 10.34%, although in most cases, it is below 5%. The plot of the estimated M₃ /M₁ and M₂ /M₁ size ratios obtained in the SH hominins occupies a small area of the theoretical developmental morphospace obtained for rodent species. In addition, the majority of the values are placed near the theoretical line which defines the relationship predicted by the inhibitory cascade model in these mammals. The values of the slope and intercept of the reduced major regression obtained for the SH individuals do not differ significantly from those obtained for rodent species, thus confirming that the size of the molars of the SH hominins fits the inhibitory cascade model. We discuss these results in terms of dental development. Despite the promising results in the SH sample, we draw the attention to the fact that most Early Pleistocene Homo specimens exhibit a pattern (M₁  < M₂  > M₃ ), which is outside the expected theoretical morphospace predicted by the inhibitory cascade model. The shift from the M1 < M2 < M3 size relationship observed in early hominins (including H. habilis) to the M1 > M2 > M3 size relationship, which is predominant in modern humans, includes sequences that depart from predictions of the inhibitory cascade model. Additional studies are required to understand these deviations.

Genetic correlations in the rhesus macaque dentition

Quantitative genetic analyses can indicate how complex traits respond to natural selection by demonstrating the genetic relationships between features that constrain their evolution. Genetic correlations between dental measurements have been estimated previously in baboons, humans, and tamarins and indicate variable patterns of modularity by tooth type across these taxa. Here, heritabilities of, and genetic correlations between, linear dental measurements were estimated from the Cayo Santiago rhesus macaques (Macaca mulatta). Relationships between the genetic correlation matrix and matrices designed to test hypotheses of modularity by tooth type, region, function, and development were assessed using a random skewers approach. Dental measurements were found to be moderately to highly heritable, with 24 of 28 heritability estimates differing significantly (p < 0.05) from zero. Almost all genetic correlations between dental dimensions were positive. The genetic correlation matrix was most similar to a regionally modular matrix, with distinct anterior and postcanine tooth modules. This pattern is consistent with previous quantitative genetic analyses of baboons and previous phenotypic analyses of cercopithecoid primates. The existence of a genetic module for the canines and honing premolar was not supported. Ongoing selection pressures, rather than strong genetic constraints, are likely necessary to preserve functional relationships between the canines and honing premolar based on these findings. The genetic correlation matrix of the Cayo Santiago rhesus macaques mirrors patterns of phenotypic correlations observed for cercopithecoid primates broadly and demonstrates that genetic contributions to these patterns may be fairly stable over the course of cercopithecoid evolution. The quantitative genetic study of additional taxa will be necessary to determine whether the regional modularity of baboons and macaques, or the integrated pattern of humans and tamarins, is shared more broadly across primates.

Transcription and Beyond: Delineating FOXG1 Function in Cortical Development and Disorders

Forkhead Box G1 (FOXG1) is a member of the Forkhead family of genes with non-redundant roles in brain development, where alteration of this gene's expression significantly affects the formation and function of the mammalian cerebral cortex. FOXG1 haploinsufficiency in humans is associated with prominent differences in brain size and impaired intellectual development noticeable in early childhood, while homozygous mutations are typically fatal. As such, FOXG1 has been implicated in a wide spectrum of congenital brain disorders, including the congenital variant of Rett syndrome, infantile spasms, microcephaly, autism spectrum disorder (ASD) and schizophrenia. Recent technological advances have yielded greater insight into phenotypic variations observed in FOXG1 syndrome, molecular mechanisms underlying pathogenesis of the disease, and multifaceted roles of FOXG1 expression. In this review, we explore the emerging mechanisms of FOXG1 in a range of transcriptional to posttranscriptional events in order to evolve our current view of how a single transcription factor governs the assembly of an elaborate cortical circuit responsible for higher cognitive functions and neurological disorders.

Mandible exosomal ssc-mir-133b regulates tooth development in miniature swine via endogenous apoptosis

Signal transduction between different organs is crucial in the normal development of the human body. As an important medium for signal communication, exosomes can transfer important information, such as microRNAs (miRNAs), from donors to receptors. MiRNAs are known to fine-tune a variety of biological processes, including maxillofacial development; however, the underlying mechanism remains largely unknown. In the present study, transient apoptosis was found to be due to the expression of a miniature swine maxillofacial-specific miRNA, ssc-mir-133b. Upregulation of ssc-mir-133b resulted in robust apoptosis in primary dental mesenchymal cells in the maxillofacial region. Cell leukemia myeloid 1 (Mcl-1) was verified as the functional target, which triggered further downstream activation of endogenous mitochondria-related apoptotic processes during tooth development. More importantly, mandible exosomes were responsible for the initial apoptosis signal. An animal study demonstrated that ectopic expression of ssc-mir-133b resulted in failed tooth formation after 12 weeks of subcutaneous transplantation in nude mice. The tooth germ developed abnormally without the indispensable exosomal signals from the mandible.

The delivery of the small regulatory molecule microRNA-133b via extracellular vesicles released from the lower jaw is required for tooth formation in pigs and mice. Several microRNAs have been implicated in tooth development, but their precise roles are poorly understood. Songlin Wang at Capital Medical University, China, and colleagues found that microRNA-133b causes temporary cell death at sites of molar development by reducing the levels of the pro-survival protein myeloid cell leukemia-1. Moreover, they showed that microRNA-133b is delivered from the lower jaw in exosomes and that interrupting this signal prevents tooth development. These findings highlight the importance of cross-talk between jaw and tooth tissue for normal development and reveal a possible mechanism for the prevention and treatment of abnormal tooth formation.

Coordination of bilateral tooth replacement in the juvenile gecko is continuous with in ovo patterning

We performed a test of how function impacts a genetically programmed process that continues into postnatal life. Using the dentition of the polyphyodont gecko as our model, tooth shedding was recorded longitudinally across the jaw. We compared two time periods: one in which teeth were patterned symmetrically in ovo and a later period when teeth were initiated post-hatching. By pairing shedding events on the right and left sides, we found the patterns of tooth loss are symmetrical and stable between periods, with only subtle deviations. Contralateral tooth positions shed within 3-4 days of each other in most animals (7/10). A minority of animals (3/10) had systematic tooth position shifts between right and left sides, likely due to changes in functional tooth number. Our results suggest that in addition to reproducible organogenesis of individual teeth, there is also a neotenic retention of jaw-wide dental patterning in reptiles. Finer analysis of regional asymmetries revealed changes to which contralateral position shed first, affecting up to one quarter of the jaw (10 tooth positions). Once established, these patterns were retained longitudinally. Taken together, the data support regional and global mechanisms of coordinating tooth cycling post-hatching.

A Novel Mutation in Human PAX9 Causes Molar Oligodontia

Experimental and animal studies, as well as genetic mutations in man, have indicated that the development of dentition is under the control of several genes. So far, mutations in MSX1 and PAX9 have been associated with dominantly inherited forms of human tooth agenesis that mainly involve posterior teeth. We identified a large kindred with several individuals affected with molar oligodontia that was transmitted as an isolated autosomal-dominant trait. Two-point linkage analysis using DNA from the family and polymorphic marker D14S288 in chromosome 14q12 produced a maximum lod score of 2.29 at Θ = 0.1. Direct sequencing of exons 2 to 4 of PAX9revealed a cytosine insertion mutation at nucleotide 793, leading to a premature termination of translation at aa 315. Our results support the conclusion that molar oligodontia is due to allelic heterogeneity in PAX9, and these data further corroborate the role of PAX9 as an important regulator of molar development.

Patterning of mammalian heterodont dentition within the upper and lower jaws

Mammalian heterodont dentition is differentiated into incisors, canines, premolars, and molars in the mesial-distal direction, in both the upper and lower jaws. Although all the lower teeth are rooted in the mandible, the upper incisors are rooted in the premaxilla and the upper canine and the teeth behind it are in the maxilla. The present study uncovers ontogenetic backgrounds to these shared and differing mesiodistal patterns of the upper and lower dentition. To this end, we examined the dentition development of the house shrew, Suncus murinus, instead of the rodent model animals because the dentition of this primitive eutherian species includes all the tooth classes, and no toothless diastema region. In the shrew, the upper incisor-forming region extended over the medial nasal prominence and the mesial part of the maxillary prominence. Consequently, the maxillary and mandibular prominences were in a mirror-image relationship in terms of the mesiodistally differentiated tooth-forming regions and of the complementary gene expression pattern, with Bmp4 in the mesial and Fgf8 in the distal regions. This suggests shared molecular mechanisms regulating tooth class differentiation between the upper and lower jaws. However, the premaxillary bone appeared within the mesenchyme of the medial nasal prominence, but grew distally beyond the former epithelial boundary with the maxillary prominence to form, finally, the incisive (premaxillary-maxillary) suture just mesial to the canine. Therefore, the developmental locations of the upper incisors are not inconsistent with the classical osteological criterion of the upper canine by comparative odontologists.

MSX2 in ameloblast cell fate and activity

While many effectors have been identified in enamel matrix and cells via genetic studies, physiological networks underlying their expression levels and thus the natural spectrum of enamel thickness and degree of mineralization are now just emerging. Several transcription factors are candidates for enamel gene expression regulation and thus the control of enamel quality. Some of these factors, such as MSX2, are mainly confined to the dental epithelium. MSX2 homeoprotein controls several stages of the ameloblast life cycle. This chapter introduces MSX2 and its target genes in the ameloblast and provides an overview of knowledge regarding its effects in vivo in transgenic mouse models. Currently available in vitro data on the role of MSX2 as a transcription factor and its links to other players in ameloblast gene regulation are considered. MSX2 modulations are relevant to the interplay between developmental, hormonal and environmental pathways and in vivo investigations, notably in the rodent incisor, have provided insight into dental physiology. Indeed, in vivo models are particularly promising for investigating enamel formation and MSX2 function in ameloblast cell fate. MSX2 may be central to the temporal-spatial restriction of enamel protein production by the dental epithelium and thus regulation of enamel quality (thickness and mineralization level) under physiological and pathological conditions. Studies on MSX2 show that amelogenesis is not an isolated process but is part of the more general physiology of coordinated dental-bone complex growth.

General and craniofacial development are complex adaptive processes influenced by diversity

Complex systems are present in such diverse areas as social systems, economies, ecosystems and biology and, therefore, are highly relevant to dental research, education and practice. A Complex Adaptive System in biological development is a dynamic process in which, from interacting components at a lower level, higher level phenomena and structures emerge. Diversity makes substantial contributions to the performance of complex adaptive systems. It enhances the robustness of the process, allowing multiple responses to external stimuli as well as internal changes. From diversity comes variation in outcome and the possibility of major change; outliers in the distribution enhance the tipping points. The development of the dentition is a valuable, accessible model with extensive and reliable databases for investigating the role of complex adaptive systems in craniofacial and general development. The general characteristics of such systems are seen during tooth development: self-organization; bottom-up emergence; multitasking; self-adaptation; variation; tipping points; critical phases; and robustness. Dental findings are compatible with the Random Network Model, the Threshold Model and also with the Scale Free Network Model which has a Power Law distribution. In addition, dental development shows the characteristics of Modularity and Clustering to form Hierarchical Networks. The interactions between the genes (nodes) demonstrate Small World phenomena, Subgraph Motifs and Gene Regulatory Networks. Genetic mechanisms are involved in the creation and evolution of variation during development. The genetic factors interact with epigenetic and environmental factors at the molecular level and form complex networks within the cells. From these interactions emerge the higher level tissues, tooth germs and mineralized teeth. Approaching development in this way allows investigation of why there can be variations in phenotypes from identical genotypes; the phenotype is the outcome of perturbations in the cellular systems and networks, as well as of the genotype. Understanding and applying complexity theory will bring about substantial advances not only in dental research and education but also in the organization and delivery of oral health care.

Three-dimensional analysis of the early development of the dentition

Tooth development has attracted the attention of researchers since the 19th century. It became obvious even then that morphogenesis could not fully be appreciated from two-dimensional histological sections. Therefore, methods of three-dimensional (3D) reconstructions were employed to visualize the surface morphology of developing structures and to help appreciate the complexity of early tooth morphogenesis. The present review surveys the data provided by computer-aided 3D analyses to update classical knowledge of early odontogenesis in the laboratory mouse and in humans. 3D reconstructions have demonstrated that odontogenesis in the early stages is a complex process which also includes the development of rudimentary odontogenic structures with different fates. Their developmental, evolutionary, and pathological aspects are discussed. The combination of in situ hybridization and 3D reconstruction have demonstrated the temporo-spatial dynamics of the signalling centres that reflect transient existence of rudimentary tooth primordia at loci where teeth were present in ancestors. The rudiments can rescue their suppressed development and revitalize, and then their subsequent autonomous development can give rise to oral pathologies. This shows that tooth-forming potential in mammals can be greater than that observed from their functional dentitions. From this perspective, the mouse rudimentary tooth primordia represent a natural model to test possibilities of tooth regeneration.

Size and Shape Variability in Human Molars during Odontogenesis

Under the patterning cascade model (PCM) of cusp development inspired by developmental genetic studies, it is predicted that the location and the size of later-forming cusps are more variable than those of earlier-forming ones. Here we assessed whether differences in the variability among cusps in total and each particular crown component (enamel-dentin junction [EDJ], outer enamel surface [OES], and cement-enamel junction [CEJ]) could be explained by the PCM, using human maxillary permanent first molars (UM1) and second deciduous molars (um2). Specimens were µCT-scanned, and 3D models of EDJ and OES were reconstructed. Based on these models, landmark-based 3D geometric morphometric analyses were conducted. Size variability in both tooth types was generally consistent with the above prediction, and the differences in size variation among cusps were smaller for the crown components completed in later stages of odontogenesis. With a few exceptions, however, the prediction was unsupported regarding shape variability, and UM1 and um2 showed different patterns. Our findings suggested that the pattern of size variability would be caused by temporal factors such as the order of cusp initiation and the duration from the beginning of mineralization to the completion of crown formation, whereas shape variability may be affected by both topographic and temporal factors.

Developmental disorders of the dentition: an update

Dental anomalies are common congenital malformations that can occur either as isolated findings or as part of a syndrome. This review focuses on genetic causes of abnormal tooth development and the implications of these abnormalities for clinical care. As an introduction, we describe general insights into the genetics of tooth development obtained from mouse and zebrafish models. This is followed by a discussion of isolated as well as syndromic tooth agenesis, including Van der Woude syndrome (VWS), ectodermal dysplasias (EDs), oral-facial-digital (OFD) syndrome type I, Rieger syndrome, holoprosencephaly, and tooth anomalies associated with cleft lip and palate. Next, we review delayed formation and eruption of teeth, as well as abnormalities in tooth size, shape, and form. Finally, isolated and syndromic causes of supernumerary teeth are considered, including cleidocranial dysplasia and Gardner syndrome.

The genetic basis of dental anomalies and its relation to orthodontics

The interruption of odontogenesis by any etiological factor may result in dental anomalies. Apart from the environmental factors, the impact of genetics in dental anomalies was found to be a factor in different levels. Many authors had questioned a common genetic defect resulting in different phenotypic conditions such as absent, malformed, malposed or ectopic teeth. Because the multidisciplinary treatment of these dental anomalies such as hypodontia, impaction etc., involves orthodontic intervention, orthodontists must be aware of the etiology and possible correlative conditions with dental anomalies.

Root lengths in the permanent teeth of 45,X females

OBJECTIVE

Studies in permanent and deciduous tooth crowns and permanent tooth roots in individuals with sex chromosome anomalies and in their relatives have given proof that the X chromosome affects enamel formation, root length and crown and root morphology. The present research studies the effects of sex chromosome deficiency on the development of permanent tooth root.

MATERIALS AND METHODS

This research investigated tooth root lengths in a group of 97 45,X females. As controls there were 32 sisters and 28 mothers of the 45,X females, 45 female and 42 male population controls and 15 45,X/46,XX females from the KVANTTI research project. Tooth root lengths on both sides of the jaws were measured from panoramic radiographs in each acceptable instance.

RESULTS

The results showed significantly shorter tooth root lengths in the 45,X females than in the female and male controls in all teeth measured, whereas in the female relatives tooth root lengths were shifted towards the aneuploids in relation to that in the general population. The tooth root lengths in the 45,X females differed more from those found in their sisters than in their mothers.

CONCLUSIONS

These results with the large pure sample size of the whole dentitions in patients with monosomy X confirm the earlier findings of short tooth roots in 45,X females. The fact that in most instances there were no significant differences in tooth root lengths between 45,X and 45,X/46,XX females comes close to the earlier findings regarding mesio-distal tooth crown sizes.

Development and evolution of the unique cetacean dentition

The evolutionary success of mammals is rooted in their high metabolic rate. A high metabolic rate is sustainable thanks to efficient food processing and that in turn is facilitated by precise occlusion of the teeth and the acquisition of rhythmic mastication. These major evolutionary innovations characterize most members of the Class Mammalia. Cetaceans are one of the few groups of mammals in which precise occlusion has been secondarily lost. Most toothed whales have an increased number of simple crowned teeth that are similar along the tooth row. Evolution toward these specializations began immediately after the time cetaceans transitioned from terrestrial-to-marine environments. The fossil record documents the critical aspects of occlusal evolution of cetaceans, and allows us to pinpoint the evolutionary timing of the macroevolutionary events leading to their unusual dental morphology among mammals. The developmental controls of tooth differentiation and tooth number have been studied in a few mammalian clades, but nothing is known about how these controls differ between cetaceans and mammals that retain functional occlusion. Here we show that pigs, a cetacean relative with regionalized tooth morphology and complex tooth crowns, retain the typical mammalian gene expression patterns that control early tooth differentiation, expressing Bmp4 in the rostral (mesial, anterior) domain of the jaw, and Fgf8 caudally (distal, posterior). By contrast, dolphins have lost these regional differences in dental morphology and the Bmp4 domain is extended into the caudal region of the developing jaw. We hypothesize that the functional constraints underlying mammalian occlusion have been released in cetaceans, facilitating changes in the genetic control of early dental development. Such major developmental changes drive morphological evolution and are correlated with major shifts in diet and food processing during cetacean evolution.

Common developmental pathways link tooth shape to regeneration

In many non-mammalian vertebrates, adult dentitions result from cyclical rounds of tooth regeneration wherein simple unicuspid teeth are replaced by more complex forms. Therefore and by contrast to mammalian models, the numerical majority of vertebrate teeth develop shape during the process of replacement. Here, we exploit the dental diversity of Lake Malawi cichlid fishes to ask how vertebrates generally replace their dentition and in turn how this process acts to influence resulting tooth morphologies. First, we used immunohistochemistry to chart organogenesis of continually replacing cichlid teeth and discovered an epithelial down-growth that initiates the replacement cycle via a labial proliferation bias. Next, we identified sets of co-expressed genes from common pathways active during de novo, lifelong tooth replacement and tooth morphogenesis. Of note, we found two distinct epithelial cell populations, expressing markers of dental competence and cell potency, which may be responsible for tooth regeneration. Related gene sets were simultaneously active in putative signaling centers associated with the differentiation of replacement teeth with complex shapes. Finally, we manipulated targeted pathways (BMP, FGF, Hh, Notch, Wnt/β-catenin) in vivo with small molecules and demonstrated dose-dependent effects on both tooth replacement and tooth shape. Our data suggest that the processes of tooth regeneration and tooth shape morphogenesis are integrated via a common set of molecular signals. This linkage has subsequently been lost or decoupled in mammalian dentitions where complex tooth shapes develop in first generation dentitions that lack the capacity for lifelong replacement. Our dissection of the molecular mechanics of vertebrate tooth replacement coupled to complex shape pinpoints aspects of odontogenesis that might be re-evolved in the lab to solve problems in regenerative dentistry.

From molecules to mastication: the development and evolution of teeth

Teeth are unique to vertebrates and have played a central role in their evolution. The molecular pathways and morphogenetic processes involved in tooth development have been the focus of intense investigation over the past few decades, and the tooth is an important model system for many areas of research. Developmental biologists have exploited the clear distinction between the epithelium and the underlying mesenchyme during tooth development to elucidate reciprocal epithelial/mesenchymal interactions during organogenesis. The preservation of teeth in the fossil record makes these organs invaluable for the work of paleontologists, anthropologists, and evolutionary biologists. In addition, with the recent identification and characterization of dental stem cells, teeth have become of interest to the field of regenerative medicine. Here, we review the major research areas and studies in the development and evolution of teeth, including morphogenesis, genetics and signaling, evolution of tooth development, and dental stem cells.

A novel nonsense mutation in PAX9 is associated with sporadic hypodontia

The most important events during the regulation of tooth development were inductive interactions between the epithelial and mesenchymal tissues. The expression of Pax9 had been shown to specifically mark the mesenchymal regions at the prospective sites of all teeth prior to any morphological manifestations. Here, we investigated the PAX9 gene as a candidate gene for hypodontia in five unrelated Chinese patients with tooth agenesis. Direct sequencing and restriction enzyme analysis revealed a novel heterozygous mutation c.480C>G (p.160Tyr>X, Y160X) in a patient who was missing 20 permanent teeth (the third molars excluded) and 6 primary teeth. The mutation was a nonsense mutation, leading to a premature stop codon in exon 2 of PAX9 gene. PCR analysis of complementary DNA from cultured lymphocytes of the affected individual could not indicate the complete degradation of the mutated transcript. Promoter reporter assays revealed reduced transcriptional activity of the mutated PAX9 protein suggesting that the severe phenotype may result from haploinsufficiency of PAX9. In another patient with 15 missing permanent teeth (the third molars excluded), we found the c.219insG mutation previously reported by Stockton.

Comparative morphology of normal and cleft minipigs demonstrates dual origin of incisors

OBJECTIVE

The incisors of the mammalian dental arch develop from tissues arising from separated facial prominences. These primordial craniofacial structures undergo complex morphogenetic processes as they merge and fuse in a time and space dependent fashion. However, local contributions of precursor facial prominences to the incisors that develop subsequently remain unknown. The purpose of this study was to characterize the development of all three deciduous upper rostral teeth in the pig (Sus scrofa f. domestica) for the identification of the likely facial prominence contributions to the incisors based on normal and pathological developmental relationships.

DESIGN

Embryonic minipigs were collected between gestational days 20-36 (E20-36), processed for histological analysis and subjected to computerized 3D modelling. The location and morphology of the incisors (i) in these specimens were characterized and compared between developmental stages. A second set of neonatal minipigs displaying cleft lip and/or cleft palate defects were also obtained and incisor locations and eruption patterns were morphologically examined.

RESULTS

Palate formation begins during the third week of gestation (E20) in the minipig with ossification of the premaxilla initiating soon afterwards (E24). The third incisor (i3) develops caudally to the contact seam formed by the fusion of the primary and secondary palates in normal embryos. All cleft animals displayed normal i3 and canine, on other hand, development of i1 and i2 was often disrupted similar to human.

CONCLUSIONS

Our observations suggest a dual embryonic origin of the incisors in minipigs with the first and second incisors originating from the frontonasal prominence whilst the third incisor forms from tissues derived from the maxillary prominence.

Root length in the permanent teeth of women with an additional X chromosome (47,XXX females)

OBJECTIVE

Previous studies have demonstrated differential effects of the X and Y chromosomes on dental development. The expression of sexual dimorphism in terms of tooth size, shape, number and developmental timing has been explained especially by Y chromosome influence. The Y chromosome promotes enamel, crown and root dentin development. The X chromosome has an effect on enamel deposition. The aim of this research is to study the influence of the extra X chromosome on the development of permanent tooth root length.

MATERIAL AND METHODS

The study subjects (all of whom were from the Kvantti Dental Research Project) were seven 47,XXX females, five female relatives and 51 and 52 population control men and women, respectively. Measurements were made from panoramic radiographs on available permanent teeth by a digital calliper according to established procedures.

RESULTS

The results showed that the maxillary root lengths of the 47,XXX females were of the same magnitude as those in normal women, but the mandibular root lengths were longer in 47,XXX females than in normal men or women.

CONCLUSIONS

Increased enamel thickness in the teeth of 47,XXX females is apparently caused by the active enamel gene in all X chromosomes having no increased influence on crown dentin formation. These results in 47,XXX females indicate an increase in root dentin development, at least in the mandible, which together with the data on crown formation reflects a continuous long-lasting effect of the X chromosome on dental development.

Current knowledge of tooth development: patterning and mineralization of the murine dentition

The integument forms a number of different types of mineralized element, including dermal denticles, scutes, ganoid scales, elasmoid scales, fin rays and osteoderms found in certain fish, reptiles, amphibians and xenarthran mammals. To this list can be added teeth, which are far more widely represented and studied than any of the other mineralized elements mentioned above, and as such can be thought of as a model mineralized system. In recent years the focus for studies on tooth development has been the mouse, with a wealth of genetic information accrued and the availability of cutting edge techniques. It is the mouse dentition that this review will concentrate on. The development of the tooth will be followed, looking at what controls the shape of the tooth and how signals from the mesenchyme and epithelium interact to lead to formation of a molar or incisor. The number of teeth generated will then be investigated, looking at how tooth germ number can be reduced or increased by apoptosis, fusion of tooth germs, creation of new tooth germs, and the generation of additional teeth from existing tooth germs. The development of mineralized tissue will then be detailed, looking at how the asymmetrical deposition of enamel is controlled in the mouse incisor. The continued importance of epithelial-mesenchymal interactions at these later stages of tooth development will also be discussed. Tooth anomalies and human disorders have been well covered by recent reviews, therefore in this paper we wish to present a classical review of current knowledge of tooth development, fitting together data from a large number of recent research papers to draw general conclusions about tooth development.

Multilevel complex interactions between genetic, epigenetic and environmental factors in the aetiology of anomalies of dental development

Dental anomalies are caused by complex interactions between genetic, epigenetic and environmental factors during the long process of dental development. This process is multifactorial, multilevel, multidimensional and progressive over time. In this paper the evidence from animal models and from human studies is integrated to outline the current position and to construct and evaluate models, as a basis for future work. Dental development is multilevel entailing molecular and cellular interactions which have macroscopic outcomes. It is multidimensional, requiring developments in the three spatial dimensions and the fourth dimension of time. It is progressive, occurring over a long period, yet with critical stages. The series of interactions involving multiple genetic signalling pathways are also influenced by extracellular factors. Interactions, gradients and spatial field effects of multiple genes, epigenetic and environmental factors all influence the development of individual teeth, groups of teeth and the dentition as a whole. The macroscopic, clinically visible result in humans is a complex unit of four different tooth types formed in morphogenetic fields, in which teeth within each field form directionally and erupt at different times, reflecting the spatio-temporal control of development. Even when a specific mutation of a single gene or one major environmental insult has been identified in a patient with a dental anomaly, detailed investigation of the phenotype often reveals variation between affected individuals in the same family, between dentitions in the same individual and even between different teeth in the same dentition. The same, or closely similar phenotypes, whether anomalies of tooth number or structure, may arise from different aetiologies: not only mutations in different genes but also environmental factors may result in similar phenotypes. Related to the action of a number of the developmental regulatory genes active in odontogenesis, in different tissues, mutations can result in syndromes of which dental anomalies are part. Disruption of the antagonistic balance between developmental regulatory genes, acting as activators or inhibitors can result in dental anomalies. There are critical stages in the development of the individual tooth germs and, if progression fails, the germ will not develop further or undergoes apoptosis. The reiterative signalling patterns over time during the sequential process of initiation and morphogenesis are reflected in the clinical association of anomalies of number, size and form and the proposed models. An initial step in future studies is to combine the genetic investigations with accurate recording and measurement of the phenotype. They also need to collate findings at each level and exploit the accurate definition of both human and murine phenotypes now possible.

Autoregulatory loop of Msx1 expression involving its antisense transcripts

The Msx1 homeogene plays an important role in epithelial-mesenchymal interactions leading organogenesis. Msx1 gene is submitted to bidirectional transcription generating a long non-coding antisense (AS) RNA potentially involved in Msx1 expression regulation. RT-Q-PCR and RNA-FISH studies indicated that transient overexpression of the Msx1 AS transcript in 705IC5 mouse odontoblasts decreased the abundance of endogenous Msx1 S mRNA at the post-transcriptional level. Conversely, Msx1 overexpression increased the AS RNA level probably by activating AS transcription. In vivo mapping by RT-PCR evidenced both Msx1 RNAs in all adult mouse tissues tested raising the issue of Msx1 function during adulthood. The expression patterns of the two RNAs were similar, confirming the tight S/AS relationship. In particular, both Msx1 mRNAs and Msx1 protein were similarly distributed in eyes, and were found in regions with a common ectodermic origin and in cells potentially involved in regeneration. In conclusion, we report that Msx1 S RNA is negatively controlled by its AS RNA at a post-transcriptional level, and that the AS RNA is retrocontrolled positively by Msx1. The tight link between Msx1 S and AS RNAs constitutes a regulatory loop resulting in a fine-tuned expression of Msx1 which appears to be significant for adult homeostasis.

High yield expression of biologically active recombinant full length human tuftelin protein in baculovirus-infected insect cells

Tuftelin is an acidic protein expressed at very early stages of mouse odontogenesis. It was suggested to play a role during epithelial-mesenchymal interactions, and later, when enamel formation commences, to be involved in enamel mineralization. Tuftelin was also detected in several normal soft tissues of different origins and some of their corresponding cancerous tissues. Tuftelin is expressed in low quantities, and undergoes degradation in the enamel extracellular matrix. To investigate the structure and function of tuftelin, the full length recombinant human tuftelin protein was produced. The full length human tuftelin cDNA was cloned using Gateway recombination into the Bac-to-Bac system compatible transfer vector pDest10. This vector adds a hexahistidine tag to the N-terminus of the expressed protein, enabling one-step affinity purification on nickel column. The recombinant human tuftelin protein was transposed into the bacmid and expressed in Spodoptera frugiperda (Sf9) insect cells. The yield of the purified, his-tagged recombinant full length human Tuftelin (rHTuft+) was 5-8 mg/L culture. rHTuft+ was characterized by SDS-PAGE, Western blot, ESI-TOF spectrometry, restriction mapping and MS/MS sequencing. The availability of the purified, full length recombinant human tuftelin protein opened up the possibility to investigate novel functions of tuftelin. Application of rHTuft+ agarose beads onto embryonic mouse mandibular explants caused changes in the surrounding epithelial cells, including morphology, orientation and spatial organization. Further studies using DiI labeling, revealed that rHTuft+, placed on the tooth germ region, brought about recruitment of adjacent embryonic mesenchymal cells. These findings support the hypothesis that tuftelin plays an important role during embryogenesis.

A curriculum vitae of teeth: evolution, generation, regeneration

The ancestor of recent vertebrate teeth was a tooth-like structure on the outer body surface of jawless fishes. Over the course of 500,000,000 years of evolution, many of those structures migrated into the mouth cavity. In addition, the total number of teeth per dentition generally decreased and teeth morphological complexity increased. Teeth form mainly on the jaws within the mouth cavity through mutual, delicate interactions between dental epithelium and oral ectomesenchyme. These interactions involve spatially restricted expression of several, teeth-related genes and the secretion of various transcription and signaling factors. Congenital disturbances in tooth formation, acquired dental diseases and odontogenic tumors affect millions of people and rank human oral pathology as the second most frequent clinical problem. On the basis of substantial experimental evidence and advances in bioengineering, many scientists strongly believe that a deep knowledge of the evolutionary relationships and the cellular and molecular mechanisms regulating the morphogenesis of a given tooth in its natural position, in vivo, will be useful in the near future to prevent and treat teeth pathologies and malformations and for in vitro and in vivo teeth tissue regeneration.

Dual epithelial origin of vertebrate oral teeth

The oral cavity of vertebrates is generally thought to arise as an ectodermal invagination. Consistent with this, oral teeth are proposed to arise exclusively from ectoderm, contributing to tooth enamel epithelium, and from neural crest derived mesenchyme, contributing to dentin and pulp. Yet in many vertebrate groups, teeth are not restricted only to the oral cavity, but extend posteriorly as pharyngeal teeth that could be derived either directly from the endodermal epithelium, or from the ectodermal epithelium that reached this location through the mouth or through the pharyngeal slits. However, when the oropharyngeal membrane, which forms a sharp ecto/endodermal border, is broken, the fate of these cells is poorly known. Here, using transgenic axolotls with a combination of fate-mapping approaches, we present reliable evidence of oral teeth derived from both the ectoderm and endoderm and, moreover, demonstrate teeth with a mixed ecto/endodermal origin. Despite the enamel epithelia having a different embryonic source, oral teeth in the axolotl display striking developmental uniformities and are otherwise identical. This suggests a dominant role for the neural crest mesenchyme over epithelia in tooth initiation and, from an evolutionary point of view, that an essential factor in teeth evolution was the odontogenic capacity of neural crest cells, regardless of possible 'outside-in' or 'inside-out' influx of the epithelium.

Dental agenesis: genetic and clinical perspectives

Dental agenesis is the most common developmental anomaly in humans and is frequently associated with several other oral abnormalities. Whereas the incidence of missing teeth may vary considerably depending on dentition, gender, and demographic or geographic profiles, distinct patterns of agenesis have been detected in the permanent dentition. These frequently involve the last teeth of a class to develop (I2, P2, M3) suggesting a possible link with evolutionary trends. Hypodontia can either occur as an isolated condition (non-syndromic hypodontia) involving one (80% of cases), a few (less than 10%) or many teeth (less than 1%), or can be associated with a systemic condition or syndrome (syndromic hypodontia), essentially reflecting the genetically and phenotypically heterogeneity of the condition. Based on our present knowledge of genes and transcription factors that are involved in tooth development, it is assumed that different phenotypic forms are caused by different genes involving different interacting molecular pathways, providing an explanation not only for the wide variety in agenesis patterns but also for associations of dental agenesis with other oral anomalies. At present, the list of genes involved in human non-syndromic hypodontia includes not only those encoding a signaling molecule (TGFA) and transcription factors (MSX1 and PAX9) that play critical roles during early craniofacial development, but also genes coding for a protein involved in canonical Wnt signaling (AXIN2), and a transmembrane receptor of fibroblast growth factors (FGFR1). Our objective was to review the current literature on the molecular mechanisms that are responsible for selective dental agenesis in humans and to present a detailed overview of syndromes with hypodontia and their causative genes. These new perspectives and future challenges in the field of identification of possible candidate genes involved in dental agenesis are discussed.