Formulation and characterization of lyophilized curcumin solid dispersions for antimicrobial photodynamic therapy (aPDT): studies on curcumin and curcuminoids LII

Photodynamic therapy with curcumin and near-infrared radiation as an antitumor strategy to glioblastoma cells

Glioblastoma is a malignant neoplasm that develops in the central nervous system and is characterized by high rates of cell proliferation and invasion, presenting resistance to treatments and a poor prognosis. Photodynamic therapy (PDT) is a therapeutic modality that can be applied in oncological cases and stands out for being less invasive. Photosensitizers (PS) of natural origin gained prominence in PDT. Curcumin (CUR) is a natural compound that has been used in PDT, considered a promising PS. In this work, we evaluated the effects of PDT-mediated CUR and near-infrared radiation (NIR) in glioblastoma cells. Through trypan blue exclusion analysis, we chose the concentration of 5 μM of CUR and the dose of 2 J/cm2 of NIR that showed better responses in reducing the viable cell number in the C6 cell line and did not show cytotoxic/cytostatic effects in the HaCat cell line. Our results show that there is a positive interaction between CUR and NIR as a PDT model since there was an increase in ROS levels, a decrease in cell proliferation, increase in cytotoxicity with cell death by autophagy and necrosis, in addition to the presence of oxidative damage to proteins. These results suggest that the use of CUR and NIR is a promising strategy for the antitumor application of PDT.

Photodynamic Action of Curcumin and Methylene Blue against Bacteria and SARS-CoV-2-A Review

Coronavirus disease 19 (COVID-19) has occurred for more than four years, and the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causing COVID-19 is a strain of coronavirus, which presents high rates of morbidity around the world. Up to the present date, there are no therapeutics that can avert this form of illness, and photodynamic therapy (PDT) may be an alternative approach against SARS-CoV-2. Curcumin and methylene blue have been approved and used in clinical practices as a photosensitizer in PDT for a long time with their anti-viral properties and for disinfection through photo-inactivated SARS-CoV-2. Previously, curcumin and methylene blue with antibacterial properties have been used against Gram-positive bacteria, Staphylococcus aureus (S. aureus), and Gram-negative bacteria, Escherichia coli (E. coli), Enterococcus faecalis (E. faecalis), and Pseudomonas aeruginosa (P. aeruginosa).

METHODS

To conduct a literature review, nine electronic databases were researched, such as WanFang Data, PubMed, Science Direct, Scopus, Web of Science, Springer Link, SciFinder, and China National Knowledge Infrastructure (CNKI), without any regard to language constraints. In vitro and in vivo studies were included that evaluated the effect of PDT mediated via curcumin or methylene blue to combat bacteria and SARS-CoV-2. All eligible studies were analyzed and summarized in this review.

RESULTS

Curcumin and methylene blue inhibited the replication of SARS-CoV-2. The reactive oxygen species (ROS) are generated during the treatment of PDT with curcumin and methylene blue to prevent the attachment of SARS-CoV-2 on the ACE2 receptor and damage to the nucleic acids either DNA or RNA. It also modulates pro-inflammatory cytokines and attenuates the clotting effects of the host response.

CONCLUSION

The photodynamic action of curcumin and methylene blue provides a possible approach against bacteria and SARS-CoV-2 infection because they act as non-toxic photosensitizers in PDT with an antibacterial effect, anti-viral properties, and disinfection functions.

Liquid crystal precursor system as a vehicle for curcumin-mediated photodynamic inactivation of oral biofilms

Curcumin has great potential as a photosensitizer, but it has low solubility in aqueous solutions. This study reports the antimicrobial efficacy of photodynamic inactivation (PDI) mediated by a curcumin-loaded liquid crystal precursor (LCP) on in situ dental biofilms. Thirty volunteers used intraoral devices containing enamel samples for 48 hours for biofilm formation. The samples were then removed from the device and treated either with LCP with 160 μM of curcumin plus illumination at 18 J/cm² (C + L+ group) or with LCP without curcumin in the dark (C - L - group). Following this, the biofilm from the samples was plated for quantifying the viable colonies at 37°C for 48 hours. Specific and nonspecific media were used for the presumptive isolation of Streptococcus mutans, Lactobacillus species/aciduric microorganisms, Candida species, and total microbiota. The C + L+ group showed a highly significant (P < .001) reduction in the log₁₀ (colony forming units/mL) values as compared to the C - L - group for all culture media. Hierarchical linear regression indicated that there may be predictors at individual volunteer level explaining the difference in the PDI efficacy among different individuals (P = .001). The LCP system retained curcumin and released it slowly and continuously, thus protecting the drug from photodegradation. LCP with curcumin is considered effective for the photoinactivation of dental biofilms, but the PDI efficacy may differ based on the host's individual characteristics.

Co-crystallization of curcumin for improved photodynamic inactivation of Vibrio parahaemolyticus and its application for the preservation of cooked clams

Curcumin (CUR) is a natural active product widely used as photosensitizer in photodynamic inactivation (PDI) due to low toxicity and low cost. However, the main challenge that limit the efficacy of CUR in PDI are its low solubility in water medium and hence low bioavailability. The co-crystallization is a novel process enables improvements in physicochemical properties such as solubility and bioavailability of water insoluble compound by the incidence of molecular interactions between the active pharmaceutical ingredient and conformer. The main objective of this work is to produce CUR-d-Tyr co-crystal (CDC) by co-crystallization technique using d-Tyrosine (d-Tyr) as the conformer in order to increase CUR water solubility as well as antimicrobial photodynamic activity. CDC presented a different crystalline structure compared with pure CUR. The solubility of CDC in water medium was about 16.5 times greater than pure CUR. The co-crystallization process increased CUR-mediated photodynamic inactivation efficacy of Vibrio parahaemolyticus (V. parahaemolyticus), probably due to alterations in its bioavailability. Moreover, cell membrane damage and production of cytotoxic singlet oxygen (¹O₂) was proved as main photosensitization mechanism. Furthermore, the application of CDC-mediated PDI on cooked clam reduced weightlessness of cooked clams, inhibited lipid oxidation, and maintained a better appearance, serving as a promising preservation techniques in food industry.

Parietin Cyclodextrin-Inclusion Complex as an Effective Formulation for Bacterial Photoinactivation

Multidrug resistance in pathogenic bacteria has become a significant public health concern. As an alternative therapeutic option, antimicrobial photodynamic therapy (aPDT) can successfully eradicate antibiotic-resistant bacteria with a lower probability of developing resistance or systemic toxicity commonly associated with the standard antibiotic treatment. Parietin (PTN), also termed physcion, a natural anthraquinone, is a promising photosensitizer somewhat underrepresented in aPDT because of its poor water solubility and potential to aggregate in the biological environment. This study investigated whether the complexation of PTN with (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) could increase its solubility, enhance its photophysical properties, and improve its phototoxicity against bacteria. At first, the solubilization behavior and complexation constant of the PTN/HP-β-CD inclusion complexes were evaluated by the phase solubility method. Then, the formation and physicochemical properties of PTN/HP-β-CD complexes were analyzed and confirmed in various ways. At the same time, the photodynamic activity was assessed by the uric acid method. The blue light-mediated photodegradation of PTN in its free and complexed forms were compared. Complexation of PTN increased the aqueous solubility 28-fold and the photostability compared to free PTN. PTN/HP-β-CD complexes reduce the bacterial viability of Staphylococcus saprophyticus and Escherichia coli by > 4.8 log and > 1.0 log after irradiation, respectively. Overall, the low solubility, aggregation potential, and photoinstability of PTN were overcome by its complexation in HP-β-CD, potentially opening up new opportunities for treating infections caused by multidrug-resistant bacteria.

Biomedical Applications and Bioavailability of Curcumin-An Updated Overview

Curcumin, a yellow-colored molecule derived from the rhizome of Curcuma longa, has been identified as the bioactive compound responsible for numerous pharmacological activities of turmeric, including anticancer, antimicrobial, anti-inflammatory, antioxidant, antidiabetic, etc. Nevertheless, the clinical application of curcumin is inadequate due to its low solubility, poor absorption, rapid metabolism and elimination. Advancements in recent research have shown several components and techniques to increase the bioavailability of curcumin. Combining with adjuvants, encapsulating in carriers and formulating in nanoforms, in combination with other bioactive agents, synthetic derivatives and structural analogs of curcumin, have shown increased efficiency and bioavailability, thereby augmenting the range of applications of curcumin. The scope for incorporating biotechnology and nanotechnology in amending the current drawbacks would help in expanding the biomedical applications and clinical efficacy of curcumin. Therefore, in this review, we provide a comprehensive overview of the plethora of therapeutic potentials of curcumin, their drawbacks in efficient clinical applications and the recent advancements in improving curcumin's bioavailability for effective use in various biomedical applications.

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Antimicrobial Activity of Curcumin in Nanoformulations: A Comprehensive Review

Curcumin (CUR) is a natural substance extracted from turmeric that has antimicrobial properties. Due to its ability to absorb light in the blue spectrum, CUR is also used as a photosensitizer (PS) in antimicrobial Photodynamic Therapy (aPDT). However, CUR is hydrophobic, unstable in solutions, and has low bioavailability, which hinders its clinical use. To circumvent these drawbacks, drug delivery systems (DDSs) have been used. In this review, we summarize the DDSs used to carry CUR and their antimicrobial effect against viruses, bacteria, and fungi, including drug-resistant strains and emergent pathogens such as SARS-CoV-2. The reviewed DDSs include colloidal (micelles, liposomes, nanoemulsions, cyclodextrins, chitosan, and other polymeric nanoparticles), metallic, and mesoporous particles, as well as graphene, quantum dots, and hybrid nanosystems such as films and hydrogels. Free (non-encapsulated) CUR and CUR loaded in DDSs have a broad-spectrum antimicrobial action when used alone or as a PS in aPDT. They also show low cytotoxicity, in vivo biocompatibility, and improved wound healing. Although there are several in vitro and some in vivo investigations describing the nanotechnological aspects and the potential antimicrobial application of CUR-loaded DDSs, clinical trials are not reported and further studies should translate this evidence to the clinical scenarios of infections.

“Nanomaterials of curcumin-hyaluronic acid”: their various methods of formulations, clinical and therapeutic applications, present gap, and future directions

Background

Nanomaterials of curcumin with hyaluronic acid have gained a lot of attention for potential therapeutic applications of curcumin and hyaluronic acid with or without other additional drugs. Overall studies of curcumin and hyaluronic acid show that nanomaterials of curcumin with hyaluronic acid accelerate the efficacy of curcumin in the treatment of various disorders like arthritis, cancer, hepatic fibrosis, neural disorders, wound healing, and skin regeneration, it is largely due to the combined effect of hyaluronic acid and curcumin. However, due to limited clinical trials and experiments on humans and animals, there is a substantial gap in research for the safety and efficacy of nanomaterials of curcumin-hyaluronic acid in the treatment of curcumin and hyaluronic acid targeted diseases and disorders.

Main body of the abstract

In this current review, we have first described various reported synthetic nanomaterials of curcumin-hyaluronic acid, then in the next section, we have described various fields, disorders, and diseases where these are being applied and in the final section of this review, we discussed the research gap, and future research directions needed to propose the fabricated nanocurcumin-hyaluronic acid biomaterials.

Short conclusion

There are substantial gaps in research for the safety and efficacy of nanomaterials of curcumin with hyaluronic acid due to limited available data of clinical trials and experiments of nanocurcumin-hyaluronic acid biomaterials on humans and animals. So, it entirely requires serious and committed efforts through the well-organized system of practical and clinical trials which provide results, data, and detections that lead to the formulation of the best drug from curcumin with hyaluronic acid for the treatment of curcumin and hyaluronic acid targeted diseases and disorders.

The Inactivation by Curcumin-Mediated Photosensitization of Botrytis cinerea Spores Isolated from Strawberry Fruits

Photosensitization is a novel environmentally friendly technology with promising applications in the food industry to extend food shelf life. In this study, the natural food dye curcumin, when combined with visible light (430 nm), was shown to be an effective photosensitizer against the common phytopathogenic fungi Botrytis cinerea (the cause of grey mould). Production of the associated phytotoxic metabolites botrydial and dihydrobotrydial was measured by our newly developed and validated HRAM UPLC-MS/MS method, and was also shown to be reduced by this treatment. With a light dose of 120 J/cm², the reduction in spore viability was directly proportional to curcumin concentrations, and the overall concentration of both botrydial and dihydrobotrydial also decreased with increasing curcumin concentration above 200 µM. With curcumin concentrations above 600 µM, the percentage reduction in fungal spores was close to 100%. When the dye concentration was increased to 800 µM, the spores were completely inactive and neither botrydial nor dihydrobotrydial could be detected. These results suggest that curcumin-mediated photosensitization is a potentially effective method to control B. cinerea spoilage, and also to reduce the formation of these phytotoxic botryane secondary metabolites.

Optimization and modeling of microwave-assisted extraction of curcumin and antioxidant compounds from turmeric by using natural deep eutectic solvents

Natural deep eutectic solvents (NADES) have recently come to the fore as new green solvents for foods, cosmetics and pharmaceuticals due to their unique solvation power and low toxicity. Turmeric extracts were prepared using the microwave assisted extraction method (MAE) using five NADES containing binary combinations of choline chloride, lactic acid, fructose, and sucrose. The MAE method was optimized and modeled by using response surface methodology to obtain maximum total antioxidant capacity (TAC) and curcumin contents (CC) in extracts for each NADES. All NADES extracts, except NADES-1 containing fructose and cholin chloride, exhibited higher TAC and CC than those in 80% methanol:water which was the preferred solvent in literature. NADES solvents did not interfere with subsequent antioxidant capacity measurements using the CUPRAC method. The proposed MAE is a potentially efficient and sustainable procedure in pharmaceutical and food industries for the extraction of antioxidants and curcumin from turmeric.

Photosensitizers attenuate LPS-induced inflammation: implications in dentistry and general health

Antimicrobial photodynamic therapy (aPDT) is a complementary therapeutic modality for periodontal and endodontic diseases, in which Gram-negative bacteria are directly involved. Currently, there are few evidences regarding the effects of aPDT on bacterial components such as lipopolysaccharide (LPS) and it would represent a major step forward in the clinical use of this therapy. In this context, this study aimed to evaluate the efficacy of different photosensitizers (PSs) used in aPDT in LPS inhibition. Four PSs were used in this study: methylene blue (MB), toluidine blue (TBO), new methylene blue (NMB), and curcumin (CUR). Different approaches to evaluate LPS interaction with PSs were used, such as spectrophotometry, Limulus amebocyte lysate (LAL) test, functional assays using mouse macrophages, and an in vivo model of LPS injection. Spectrophotometry showed that LPS decreased the absorbance of all PSs used, indicating interactions between the two species. LAL assay revealed significant differences in LPS concentrations upon pre-incubation with the different PSs. Interestingly, the inflammatory potential of LPS decreased after previous treatment with the four PSs, resulting in decreased secretion of inflammatory cytokines by macrophages. In vivo, pre-incubating curcumin with LPS prevented animals from undergoing septic shock within the established time. Using relevant models to study the inflammatory activity of LPS, we found that all PSs used in this work decreased LPS-induced inflammation, with a more striking effect observed for NMB and curcumin. These data advance the understanding of the mechanisms of LPS inhibition by PSs.

pH interferes in photoinhibitory activity of curcumin nanoencapsulated with pluronic® P123 against Staphylococcus aureus

Microbial contamination control is a public health concern and challenge for the food industry. Antimicrobial technologies employing natural agents may be useful in the food industry for these purposes. This work aimed to investigate the effect of photodynamic inactivation using curcumin in Pluronic® P123 nanoparticles (Cur/P123) at different pH and blue LED light against Staphylococcus aureus. Bacterial photoinactivation was conducted using different photosensitizer concentrations and exposure times at pH 5.0, 7.2 and 9.0. A mixture design was applied to evaluate the effects of exposure time (dark and light incubation) on the photoinhibitory effect. S. aureus was completely inactivated at pH 5.0 by combining low concentrations of Cur/P123 (7.80-30.25 μmol/L) and light doses (6.50-37.74 J/cm²). According to the mathematical model, dark incubation had low significance in bacterial inactivation at pH 5.0 and 9.0. No effect in bacterial inactivation was observed at pH 7.2. Cur/P123 with blue LED was effective in inactivating S. aureus. The antimicrobial effect of photodynamic inactivation was also pH-dependent.

Conjugated Photosensitizers for Imaging and PDT in Cancer Research

Early cancer detection and perfect understanding of the disease are imperative toward efficient treatments. It is straightforward that, for choosing a specific cancer treatment methodology, diagnostic agents undertake a critical role. Imaging is an extremely intriguing tool since it assumes a follow up to treatments to survey the accomplishment of the treatment and to recognize any conceivable repeating injuries. It also permits analysis of the disease, as well as to pursue treatment and monitor the possible changes that happen on the tumor. Likewise, it allows screening the adequacy of treatment and visualizing the state of the tumor. Additionally, when the treatment is finished, observing the patient is imperative to evaluate the treatment methodology and adjust the treatment if necessary. The goal of this review is to present an overview of conjugated photosensitizers for imaging and therapy.

Natural photosensitizers in photodynamic therapy: In vitro activity against monolayers and spheroids of human colorectal adenocarcinoma SW480 cells

Photodynamic Therapy (PDT), is a treatment option for cancer.It involves the photochemical interaction of light, photosensitizer (PS) and molecular oxygen to produce radical species as well as singlet oxygen which induce cell death. Anthraquinones (AQs) have been extensively studied with respect to their UV/Vis absorption characteristics and their photosensitizing properties in photodynamic reactions. We study the photoactivity of different natural AQs (Parietin, Soranjidiol and Rubiadin) in treating monolayers and multicellular tumor spheroids (MCTSs). Rubiadin and soranjidiol were isolated and purified from the stem and leaves of Heterophyllae pustulata, and PTN was from the liquen Teloschistes flavicans by using repeated combination of several chromatographic techniques. Monolayer and spheroids of human colorectal adenocarcinoma SW480 cells were incubated with different concentrations of the AQs and then irradiated at room temperature. 24 h post-PDT cell viability, nuclear morphology and type of cell death were analyzed. We observed that Soranjidiol and Rubiadin showed no significant difference in the photosensitizing ability on monoculture of colon cancer cells (LD₈₀ at 50 μM and 10 J/cm², for both AQs). Nevertheless, for Parietin (PTN) LD₈₀ was achieved at (20 μM using the same light dose (10 J/cm²). The death mechanism induced post-PDT was necrosis by use of Soranjidol and Rubiadin and apoptosis by use of PTN. Furthermore, in MCTSs of 300 and 900 μm, the treatment PTN- PDT produces the greatest cytotoxic effect. The three AQs analyzed could be promising chemotherapeutic candidates as anticancer PDT agents.

An insight into curcumin-based photosensitization as a promising and green food preservation technology

Consumer awareness on the side effects of chemical preservatives has increased the demand for natural preservation technologies. An efficient and sustainable alternative to current conventional preservation techniques should guarantee food safety and retain its quality with minimal side effects. Photosensitization, utilizing light and a natural photosensitizer, has been postulated as a viable and green alternative to the current conventional preservation techniques. The potential of curcumin as a natural photosensitizer is reviewed in this paper as a practical guide to develop a safe and effective decontamination tool for industrial use. The fundamentals of the photosensitization mechanism are discussed, with the main emphasis on the natural photosensitizer, curcumin, and its application to inactivate microorganisms as well as to enhance the shelf life of foods. Photosensitization has shown promising results in inactivating a wide spectrum of microorganisms with no reported microbial resistance due to its particular lethal mode of targeting nucleic acids. Curcumin as a natural photosensitizer has recently been investigated and demonstrated efficacy in decontamination and delaying spoilage. Moreover, studies have shown the beneficial impact of an appropriate encapsulation technique to enhance the cellular uptake of photosensitizers, and therefore, the phototoxicity. Further studies relating to improved delivery of natural photosensitizers with inherent poor solubility should be conducted. Also, detailed studies on various food products are warranted to better understand the impact of encapsulation on curcumin photophysical properties, photo-driven release mechanism, and nutritional and organoleptic properties of treated foods.

Conjugating biomaterials with photosensitizers: advances and perspectives for photodynamic antimicrobial chemotherapy

Antimicrobial resistance is threatening to overshadow last century's medical advances. Previously eradicated infectious diseases are now resurgent as multi-drug resistant strains, leading to expensive, toxic and, in some cases, ineffective antimicrobial treatments. Given this outlook, researchers are willing to investigate novel antimicrobial treatments that may be able to deal with antimicrobial resistance, namely photodynamic therapy (PDT). PDT relies on the generation of toxic reactive oxygen species (ROS) in the presence of light and a photosensitizer (PS) molecule. PDT has been known for almost a century, but most of its applications have been directed towards the treatment of cancer and topical diseases. Unlike classical antimicrobial chemotherapy treatments, photodynamic antimicrobial chemotherapy (PACT) has a non-target specific mechanism of action, based on the generation of ROS, working against cellular membranes, walls, proteins, lipids and nucleic acids. This non-specific mechanism diminishes the chances of bacteria developing resistance. However, PSs usually are large molecules, prone to aggregation, diminishing their efficiency. This review will report the development of materials obtained from natural sources, as delivery systems for photosensitizing molecules against microorganisms. The present work emphasizes on the biological results rather than on the synthesis routes to prepare the conjugates. Also, it discusses the current state of the art, providing our perspective on the field.

Dual wavelength irradiation antimicrobial photodynamic therapy using indocyanine green and metformin doped with nano-curcumin as an efficient adjunctive endodontic treatment modality

BACKGROUND

Indocyanine green (ICG) doped with nano-curcumin (N-CUR) can increase photosensitivity in antimicrobial photodynamic therapy (aPDT). Since metformin (Met) provides a synergistic advantage with photosensitivity, it was conjugated with N-CUR@ICG. Aim of the study was to evaluate the photosensitizing effect of N-CUR@ICG-Met used as a new photosensitizer in dual wavelengths irradiation (diode laser and light-emitting diode, LED) aPDT in root canals infected with Enterococcus faecalis biofilm.

MATERIALS AND METHODS

Following synthesis and confirmation of N-CUR@ICG-Met by Scanning electrone microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and Zetasizer analysis, the mature microbial biofilm was formed. The quantitative and qualitative evaluations of E. faecalis biofilm were made using microbial viability and SEM analysis of the following groups of treatment modalities (n = 5): 1- N-CUR, 2- ICG, 3- Met, 4- N-CUR@ICG, 5- N-CUR@ICG-Met, 6- Diode laser, 7- LED, 8- aPDT/diode, 9- aPDT/LED, 10- aPDT/diode laser + LED, 11- aPDT/LED + diode laser, 12- 2.5 % sodium hypochlorite (NaOCl). In addition, E. faecalis not treated served as negative control. Data were statistically analyzed using One-way Analysis of Variance (ANOVA) and the post-Hoc Bonferroni tests with a level of significance set at P < 0.05.

RESULTS

SEM, FT-IR, XRD, Zetasizer analysis confirmed successful doping of ICG-Met onto/into N-CUR. The treatment modality of N-CUR@ICG-Met mediated aPDT/diode laser, aPDT/LED, aPDT/diode laser + LED, and aPDT/LED + diode laser statistically decreased the cell viability of E. faecalis for 69.40 %, 75.52 %, 82.74 %, and 83.84 %, respectively compared with the negative control group (P < 0.05). The double wavelengths irradiation technique, which exposed the N-CUR@ICG-Met with diode laser irradiation and immediately after with LED (i.e. group No. 10), as well as, N-CUR@ICG-Met with LED irradiation and immediately after with diode laser (i.e. group No. 11) reduced the viable E. faecalis count in biofilm structures statistically more than the other treatment modalities (P < 0.05).

CONCLUSIONS

N-CUR@ICG-Met as a new photosensitizer in dual wavelengths irradiation method may improve anti-biofilm activity of aPDT against E. faecalis.

Raman Microspectroscopy as a Tool to Elucidate the Efficacy of Topical Formulations Containing Curcumin

The success of the onychomycosis treatment is directly associated with factors such as the choice of the medication, the administration route, and the pharmaceutical formulation. Photodynamic therapy (PDT) is an emerging and promising technique indicated for onychomycosis treatment. For this application, the main challenge is the efficient delivery of the photosensitizer (PS). Curcumin is widely used as a PS, however it is an unstable molecule and it is a challenge to develop a formulation with good penetration into the nail plate, maintaining the stability of curcumin. In this study, the molecular mechanisms underlying the efficacy of two topical formulations containing curcumin used in a clinical trial for onychomycosis treatment were analyzed by Raman microspectroscopy. It is shown that curcumin is present in both formulations in aggregated and non-aggregated states, and in aggregates it is present in different conformations, depending on the interaction with the solvent. This proves to be critical for efficient and uniform PS delivery to the nail and its complete use during the treatment. These analyses are showing how promising Raman microspectroscopy is in understanding the molecular mechanisms of the efficiency of photosensitizers and are helping to improve the development of pharmaceutical formulations.

Nanoparticles having amphiphilic silane containing Chlorin e6 with strong anti-biofilm activity against periodontitis-related pathogens

OBJECTIVES

The objectives of this study were to: (1) develop the multifunctional nanoparticles containing Chlorin e6 (Ce6), Coumarin 6 (C6) and Fe₃O₄ nanoparticles (NPs); and (2) investigate the inhibitory effects of the nanoparticles via antibacterial photodynamic therapy (aPDT) against three species of periodontitis-related pathogens for the first time.

MATERIALS AND METHODS

Ce6 and C6 were co-loaded into the Fe₃O₄-silane core-shell structure to form multifunctional nanoparticles (denoted "Fe₃O₄-silane@Ce6/C6 MNPs"). The physical and chemical properties of nanoparticles were characterized. Biofilm properties of Streptococcus sanguinis, Porphyromonas gingivalis and Fusobacterium nucleatum were tested. Colony-forming units (CFU), live/dead assay, and metabolic activity of biofilms were determined to evaluate the aPDT function mediated by the Fe₃O₄-silane@Ce6/C6 MNPs. Fluorescence imaging and the targeted antibacterial effects were also investigated.

RESULTS

Fe₃O₄-silane@Ce6/C6 MNPs showed superparamagnetic properties, chemical stability and water-solubility, with no cytotoxicity. Fe₃O₄ NPs did not compromise the emission peaks of C6 and Ce6. The Fe₃O₄-silane@Ce6/C6-mediated aPDT had much greater reduction in biofilms than the control groups (p < 0.05). Biofilm CFU was reduced by about 4-5 orders of magnitude via Fe₃O₄-silane@Ce6/C6-mediated aPDT. The co-loading of Ce6 and C6 enabled the real-time aPDT monitoring by ratio emissions with the same wavelength. Fe₃O₄ with magnetic field enabled the targeting of infection sites by killing bacteria via magnetic field.

CONCLUSION

The multifunctional nanoparticles exerted strong anti-biofilm activity against periodontitis-related pathogens, with excellent biocompatibility, real-time monitoring, and magnetically-targeting capacities. The multifunctional nanoparticles have great potential in antibacterial applications to inhibit the occurrence and progression of periodontitis.

Photosensitizers with Aggregation-Induced Emission: Materials and Biomedical Applications

Photodynamic therapy is arising as a noninvasive treatment modality for cancer and other diseases. One of the key factors to determine the therapeutic function is the efficiency of photosensitizers (PSs). Opposed to traditional PSs, which show quenched fluorescence and reduced singlet oxygen production in the aggregate state, PSs with aggregation-induced emission (AIE) exhibit enhanced fluorescence and strong photosensitization ability in nanoparticles. Here, the design principles of AIE PSs and their biomedical applications are discussed in detail, starting with a summary of traditional PSs, followed by a comparison between traditional and AIE PSs to highlight the various design strategies and unique features of the latter. Subsequently, the applications of AIE PSs in photodynamic cancer cell ablation, bacteria killing, and image-guided therapy are discussed using charged AIE PSs, AIE PS molecular probes, and AIE PS nanoparticles as examples. These studies have demonstrated the great potential of AIE PSs as effective theranostic agents to treat tumor or bacterial infection. This review hopefully will spur more research interest in AIE PSs for future translational research.

Curcumin-mediated Photodynamic Therapy for the treatment of oral infections-A review

BACKGROUND

Recent evidences show the promising applications of Curcumin (CUR) against different diseases, including some of the main oral pathologies. The objective of this review paper was to catalog articles that investigated the photodynamic effect of CUR for oral diseases in the last 15 years.

METHODS

The establishment of defined criteria for data collection was proposed and a total of 173 articles were identified, but only 26 were eligible for full text reading. Their main findings were critically reviewed to provide a state-of-the-art overview of the use of CUR in Dentistry.

RESULTS

Antimicrobial potential of CUR was the subject of the majority of the articles. CUR showed great potential for photodynamic action against oral bacteria, fungi, and strains resistant to conventional drugs. Some authors indicated the efficacy of CUR-mediated Photodynamic Therapy to reduce tumor cells while others observed low cytotoxicity in mammalian cells and healthy oral mucosa. However, CUR solubility and stability is still a problem for the photodynamic technique, and to overcome these drawbacks, biocompatible vehicles need to be better explored.

CONCLUSIONS

Investigations have used different CUR concentrations and formulations, as well as different light parameters. This fact, together with the lack of in vivo studies, clearly shows that clinical protocols have not been established yet. Investigations are necessary in order to establish the best concentrations and safe vehicles to be used for this technique.

New horizons in microbiological food safety: Photodynamic Decontamination based on a curcumin derivative

Outbreaks of foodborne diseases are regularly reported worldwide. In particular, uncooked plant food is considered risky in terms of microbiological safety. Food is also the most important transmission route for resistant microorganisms from animals to humans. Photodynamic Decontamination (PDc) of foodstuff was recently introduced as a novel approach for increasing microbiological food safety. We investigated the efficiency of PDc on plant food with different geometries (flat, spherical and complex) using a two-dimensional LED array as a light source (435 nm, 33.8 J cm-2) and the cationic curcumin derivative SACUR-3 as a photosensitiser. A photoantibacterial effect (>3 log10 CFU reduction) was achieved on all flat substrates (slices of cucumber, tomato and lettuce) with 10 μM, 50 μM or 100 μM SACUR-3. The maximal photokilling with a relative inactivation of 5.6 log10 was measured on lettuce using 50 μM of the photoactive compound. Phototreatment of non-germinated fenugreek seeds and mung beans was successful if the spherical objects were rotated while under illumination (antibacterial effect at 100 μM SACUR-3). The decontamination of mung bean germlings with a more complex geometry using the PDc approach was ineffective with the two-dimensional light source. In conclusion, PDc based on the cationic curcumin derivative SACUR-3 is very effective at improving the microbiological safety of plant food with a flat or spherical geometry. More complex objects will require the development of novel illumination devices.

New photosensitizers for photodynamic therapy

Photodynamic therapy (PDT) was discovered more than 100 years ago, and has since become a well-studied therapy for cancer and various non-malignant diseases including infections. PDT uses photosensitizers (PSs, non-toxic dyes) that are activated by absorption of visible light to initially form the excited singlet state, followed by transition to the long-lived excited triplet state. This triplet state can undergo photochemical reactions in the presence of oxygen to form reactive oxygen species (including singlet oxygen) that can destroy cancer cells, pathogenic microbes and unwanted tissue. The dual-specificity of PDT relies on accumulation of the PS in diseased tissue and also on localized light delivery. Tetrapyrrole structures such as porphyrins, chlorins, bacteriochlorins and phthalocyanines with appropriate functionalization have been widely investigated in PDT, and several compounds have received clinical approval. Other molecular structures including the synthetic dyes classes as phenothiazinium, squaraine and BODIPY (boron-dipyrromethene), transition metal complexes, and natural products such as hypericin, riboflavin and curcumin have been investigated. Targeted PDT uses PSs conjugated to antibodies, peptides, proteins and other ligands with specific cellular receptors. Nanotechnology has made a significant contribution to PDT, giving rise to approaches such as nanoparticle delivery, fullerene-based PSs, titania photocatalysis, and the use of upconverting nanoparticles to increase light penetration into tissue. Future directions include photochemical internalization, genetically encoded protein PSs, theranostics, two-photon absorption PDT, and sonodynamic therapy using ultrasound.

Nano-assembly of bovine serum albumin driven by rare-earth-ion (Gd) biomineralization for highly efficient photodynamic therapy and tumor imaging

Biomineralization of a rare earth ion (Gd) is first employed to assemble BSA into sub-50 nm nanoparticles (Gd@BSA) for theranostic applications.

A comparative study on the antibacterial photodynamic efficiency of a curcumin derivative and a formulation on a porcine skin model

The novel cationic curcumin derivative SACUR-3 is phototoxic to bacteria on porcine skin and does not penetrate the stratum corneum.

Trichophyton rubrum is inhibited by free and nanoparticle encapsulated curcumin by induction of nitrosative stress after photodynamic activation

Antimicrobial photodynamic inhibition (aPI) utilizes radical stress generated from the excitation of a photosensitizer (PS) with light to destroy pathogens. Its use against Trichophyton rubrum, a dermatophytic fungus with increasing incidence and resistance, has not been well characterized. Our aim was to evaluate the mechanism of action of aPI against T. rubrum using curcumin as the PS in both free and nanoparticle (curc-np) form. Nanocarriers stabilize curcumin and allow for enhanced solubility and PS delivery. Curcumin aPI, at optimal conditions of 10 μg/mL of PS with 10 J/cm² of blue light (417 ± 5 nm), completely inhibited fungal growth (p<0.0001) via induction of reactive oxygen (ROS) and nitrogen species (RNS), which was associated with fungal death by apoptosis. Interestingly, only scavengers of RNS impeded aPI efficacy, suggesting that curcumin acts potently via a nitrosative pathway. The curc-np induced greater NO^• expression and enhanced apoptosis of fungal cells, highlighting curc-np aPI as a potential treatment for T. rubrum skin infections.

Validation of photodynamic action via photobleaching of a new curcumin-based composite with enhanced water solubility

Motivated by the photochemical and photophysical properties of curcumin-based composites, the characteristics of a new curcumin-based water-soluble salt were investigated via absorption and fluorescence spectroscopy. Photobleaching was investigated using a set of LEDs in three different wavelengths (405 nm, 450 nm and 470 nm) to illuminate an aqueous solution of curcumin, evaluating its degradation for five different exposure times (0, 5, 15, 45 and 105 minutes). The results were compared with equivalent measurements of dark degradation and illumination in the presence of a singlet-oxygen quencher. Three solution concentrations (50, 100 and 150 μg/ml) were studied. To measure the fluorescence, it was used low power 405 nm excitation laser source. Time dependent photodegradation of curcumin was observed, as compared to the natural degradation of samples maintained on a dark environment. Two main absorption peaks were detected and their relation responded to both concentration and wavelength of the illumination source. A spectral correlation between absorption of curcumin and the emission bands of the sources showed an optimal spectral overlap for the 450 nm LED. For this source, photobleaching showed a less intense degradation on the presence of singlet oxygen quencher. This last result confirmed singlet oxygen production in vitro, indicating a strong potential of this composite to be used as a blue-light-activated photosensitizer.