Several methods utilized for the assessment of biocompatibility of perfluorochemicals

Deciphering the Emulsification Process to Create an Albumin-Perfluorocarbon-(o/w) Nanoemulsion with High Shelf Life and Bioresistivity

This work aimed at the development of a stable albumin-perfluorocarbon (o/w) emulsion as an artificial oxygen carrier suitable for clinical application. So far, albumin-perfluorocarbon-(o/w) emulsions have been successfully applied in preclinical trials. Cross-linking a variety of different physical and chemical methods for the characterization of an albumin-perfluorocarbon (PFC)-(o/w) emulsion was necessary to gain a deep understanding of its specific emulsification processes during high-pressure homogenization. High-pressure homogenization is simple but incorporates complex physical reactions, with many factors influencing the formation of PFC droplets and their coating. This work describes and interprets the impact of albumin concentration, homogenization pressure, and repeated microfluidizer passages on PFC-droplet formation; its influence on storage stability; and the overcoming of obstacles in preparing stable nanoemulsions. The applied methods comprise dynamic light scattering, static light scattering, cryo- and non-cryo-scanning and transmission electron microscopies, nuclear magnetic resonance spectroscopy, light microscopy, amperometric oxygen measurements, and biochemical methods. The use of this wide range of methods provided a sufficiently comprehensive picture of this polydisperse emulsion. Optimization of PFC-droplet formation by means of temperature and pressure gradients results in an emulsion with improved storage stability (tested up to 5 months) that possibly qualifies for clinical applications. Adaptations in the manufacturing process strikingly changed the physical properties of the emulsion but did not affect its oxygen capacity.

Tri-modal In vivo Imaging of Pancreatic Islets Transplanted Subcutaneously in Mice

PURPOSE

Transplantation of pancreatic islets (PIs) is a promising therapeutic approach for type 1 diabetes. The main obstacle for this strategy is that the outcome of islet engraftment depends on the engraftment site. It was our aim to develop a strategy for using non-invasive imaging techniques to assess the location and fate of transplanted PIs longitudinally in vivo.

PROCEDURES

In order to overcome the limitations of individual imaging techniques and cross-validate findings by different modalities, we have combined fluorine magnetic resonance imaging (F-19 MRI), fluorescence imaging (FLI), and bioluminescent imaging (BLI) for studying subcutaneously transplanted PIs and beta cell-like cells (INS-1E cell line) in vivo. We optimized the transduction (using lentiviral vectors) and labeling procedures (using perfluoro crown ether nanoparticles with a fluorescence dye) for PIs and INS-1E cell imaging.

RESULTS

The feasibility of using the proposed imaging methods for PI assessment was demonstrated both in vitro and in vivo. Our data suggested that F-19 MRI is suitable for high-resolution localization of transplanted cells and PIs; FLI is essential for confirmation of contrast localization by histology; and BLI is a reliable method to assess cell viability and survival after transplantation. No significant side effects on cell viability and function have been observed.

CONCLUSIONS

The proposed tri-modal imaging platform is a valuable approach for the assessment of engrafted PIs in vivo. It is potentially suitable for comparing different transplantation sites and evaluating novel strategies for improving PI transplantation technique in the future.

Novel functionalization of discrete polymeric biomaterial microstructures for applications in imaging and three-dimensional manipulation

Adapting ways to functionalize polymer materials is becoming increasingly important to their implementation in translational biomedical sciences. By tuning the mechanical, chemical, and biological qualities of these materials, their applications can be broadened, opening the door for more advanced integration into modern medical techniques. Here, we report on a method to integrate chemical functionalizations into discrete, microscale polymer structures, which are used for tissue engineering applications, for in vivo localization, and three-dimensional manipulation. Iron oxide nanoparticles were incorporated into the polymer matrix using common photolithographic techniques to create stably functional microstructures with magnetic potential. Using magnetic resonance imaging (MRI), we can promote visualization of microstructures contained in small collections, as well as facilitate the manipulation and alignment of microtopographical cues in a realistic tissue environment. Using similar polymer functionalization techniques, fluorine-containing compounds were also embedded in the polymer matrix of photolithographically fabricated microstructures. The incorporation of fluorine-containing compounds enabled highly sensitive and specific detection of microstructures in physiologic settings using fluorine MRI techniques ((19)F MRI). These functionalization strategies will facilitate more reliable noninvasive tracking and characterization of microstructured polymer implants as well as have implications for remote microstructural scaffolding alignment for three-dimensional tissue engineering applications.

Non-invasive evaluation of the location, the functional integrity and the oxygen supply of implants: 19F nuclear magnetic resonance imaging of perfluorocarbon-loaded Ba2+-alginate beads

19F nuclear magnetic resonance imaging (MRI) can be used as a non-invasive tool to simultaneously determine the location, the integrity and the oxygen supply of Ba2+-alginate implants. This requires that the beads (implants) are pre-loaded with the perfluorocarbon compound F-44E. Implantation of solid 19F-labelled beads into the peritoneum, below the kidney capsule or into the muscle of Wistar WU rats demonstrated that these beads could be detected by 19F-MRI for up to 18 months after implantation. This indicated that F-44E is not considerably released from the beads during implantation. The signal to noise ratio of liquid-core beads was higher by a factor of 4 than the signal to noise ratio of solid beads, but liquid-core beads were more fragile and also too large for implantation under the kidney capsule and into the intramuscular tissue. Quantitative 2-dimensional 19F-T1 maps (resolution 0.5 x 0.5 mm) could be deduced from 19F-MRI measurements. These T1-maps correlated to the local pO2-values. The partial oxygen pressure estimated in F-44E-loaded Ba2+-alginate beads showed that the oxygen supply inside the beads was very poor when they were implanted below the kidney capsule or into the peritoneal cavity. These low pO2-values obtained for the renal subcapsular site and the peritoneum may explain the failure of previous immunoisolated islet transplantation studies using these locations.

19F-MRI in vivo determination of the partial oxygen pressure in perfluorocarbon-loaded alginate capsules implanted into the peritoneal cavity and different tissues

Semipermeable hydrogels formed with a biocompatible alginate solution and Ba(2+) ions protect encapsulated cells and tissues from a foreign immune system. For the viability and metabolic activity of the encapsulated materials, a sufficient oxygen supply inside the capsules is necessary. Quantitative (19)F-MRI was performed on perfluorocarbon-loaded alginate capsules implanted into the peritoneal cavity, the musculus quadriceps femoris, and beneath the kidney capsule of rats, in order to determine in vivo the partial oxygen pressure (pO(2)) inside the capsules at these implantation sites. The temporal behavior of the pO(2) values was observed for at least 3 months. The most stable values over time were observed in the kidney, where inter-rat pO(2) differences were considerable. In the muscle, the values were very high directly after implantation and decreased to nearly zero after 2 weeks. In the peritoneal cavity, values changed randomly over a wide range between different rats and over time. Magn Reson Med 42:1039-1047, 1999.

Flow cytometric method using fluorescent microspheres to measure reticuloendothelial function or particulate translocation

The reticuloendothelial system (RES) influences the outcome of vascular shock and environmental stress. We describe a procedure that employs flow cytometry and 1 microm fluorescent microspheres (FM) to study RES function. FM (2 x 10(10) beads/kg) were administered via a jugular cannula in Sprague-Dawley rats. After 15 min, blood and tissues were collected and digested in 15% KOH. Phycoerythrin 1 microm beads were added to each sample as an internal standard and analyzed by flow cytometry. FM were preferentially cleared by the spleen, liver and lung. Clearance was confirmed by fluorescent photomicroscopy. Addition of the internal standard to determine accurately aspiration volume enhanced precision. This procedure offers advantages over other RES clearance methods including bacterial, radioactive or carbon clearance assays. Moreover, this method could enhance accuracy, reproducibility and speed of data collection in particulate transport studies that are based on manual microscopic scanning and FM counting.