Determination of a new biomarker in subjects exposed to 4,4'-methylenediphenyl diisocyanate

Contaminants of emerging concern in urine: a review of analytical methods for determining diisocyanates, benzotriazoles, benzothiazoles, 4-methylbenzylidene camphor, isothiazolinones, fragrances, and non-phthalate plasticizers

Human biomonitoring (HBM) frameworks assess human exposure to hazardous chemicals. In this review, we discuss and summarize sample preparation procedures and analytical methodology for six groups of chemicals of emerging concern (CECs), namely diisocyanates, benzotriazoles, benzothiazoles, 4-methylbenzylidene camphor, isothiazolinones, fragrances, and non-phthalate plasticizers, which are increasingly detected in urine, however, are not yet widely included in HBM schemes, despite posing a risk to human health. The sample preparation procedures depend largely on the chemical group; however, solid-phase extraction (SPE) is most often used due to the minimized sample handling, lower sample volume, and generally achieving lower limits of quantification (LOQs) compared to other extraction techniques. In terms of sample analysis, LC-based methods generally achieve lower limits of quantification (LOQs) compared to GC-based methods for the selected six groups of chemicals owing to their broader chemical coverage. In conclusion, since these chemicals are expected to be more frequently included in future HBM studies, it becomes evident that there is a pressing need for rigorous quality assurance programs to ensure better comparability of data. These programs should include the reporting of measurement uncertainty and facilitate inter-laboratory comparisons among the reporting laboratories. In addition, high-resolution mass spectrometry should be more commonly employed to enhance the specificity and selectivity of the applied analytical methodology since it is underrepresented in HBM. Furthermore, due to the scarcity of data on the levels of these CECs in urine, large population HBM studies are necessary to gain a deeper understanding of the associated risks.

A physiologically-based kinetic (PBK) model for work-related diisocyanate exposure: Relevance for the design and reporting of biomonitoring studies

Diisocyanates are highly reactive substances and known causes of occupational asthma. Exposure occurs mainly in the occupational setting and can be assessed through biomonitoring which accounts for inhalation and dermal exposure and potential effects of protective equipment. However the interpretation of biomonitoring data can be challenging for chemicals with complex kinetic behavior and multiple exposure routes, as is the case for diisocyanates. To better understand the relation between external exposure and urinary concentrations of metabolites of diisocyanates, we developed a physiologically based kinetic (PBK) model for methylene bisphenyl isocyanate (MDI) and toluene di-isocyanate (TDI). The PBK model covers both inhalation and dermal exposure, and can be used to estimate biomarker levels after either single or chronic exposures. Key parameters such as absorption and elimination rates of diisocyanates were based on results from human controlled exposure studies. A global sensitivity analysis was performed on model predictions after assigning distributions reflecting a mixture of parameter uncertainty and population variability. Although model-based predictions of urinary concentrations of the degradation products of MDI and TDI for longer-term exposure scenarios compared relatively well to empirical results for a limited set of biomonitoring studies in the peer-reviewed literature, validation of model predictions was difficult because of the many uncertainties regarding the precise exposure scenarios that were used. Sensitivity analyses indicated that parameters with a relatively large impact on model estimates included the fraction of diisocyanates absorbed and the binding rate of diisocyanates to albumin relative to other macro molecules.We additionally investigated the effects of timing of exposure and intermittent urination, and found that both had a considerable impact on estimated urinary biomarker levels. This suggests that these factors should be taken into account when interpreting biomonitoring data and included in the standard reporting of isocyanate biomonitoring studies.

New Method to Biomonitor Workers Exposed to 1,6-Hexamethylene Diisocyanate

Isocyanates such as 1,6-hexamethylene diisocyanate (HDI), 4,4'-methylenediphenyl diisocyanate, and toluene diisocyanate are highly reactive compounds that have a variety of commercial applications, including manufacturing polyurethane foam, elastomers, paints, adhesives, coatings, insecticides, and many other products. Their primary route of occupational exposure is through inhalation. Due to their high chemical reactivity, they are toxic and have adverse effects at the cellular and subcellular levels, leading to irritative and immunological reactions associated with lung disease. High concentrations of isocyanates are strong respiratory irritants. Bronchial sensitization and asthma are among the major adverse clinical reactions associated with low-level chronic exposure to isocyanates. Albumin adducts have been linked to the mechanism of occupational asthma caused by isocyanates. Isocyanates react in vivo with albumin, which is recognized by the immune system. Albumin adducts of isocyanates trigger immune responses and are probably the antigenic basis for isocyanate asthma. Sensitization to isocyanates is the main pathway for adverse health effects. Therefore, markers for the biologically effective dose such as albumin adducts of HDI are needed. A new isocyanate adduct of HDI with lysine─N^ε-[(6-amino-hexyl-amino)carbonyl]-lysine (HDI-Lys)─was synthesized and characterized by ¹H-NMR, ¹³C-NMR, and mass spectrometry (MS). Appropriate internal standards─HDI-Lys-4,4'-5,5'-d₄ (HDI-d₄-Lys) and N^ε-[(7-amino-heptyl-amino)carbonyl]-lysine (Hep-Lys)─were synthesized to establish a LC-MS/MS method for the analysis of HDI adducts in in vitro modified albumin and in workers. The presence of HDI-Lys was found after pronase digestion of albumin and confirmed by two independent chromatographic approaches: with a C8 reversed-phase column and with a hydrophilic interaction liquid chromatography column. Quantification was performed with positive electrospray ionization (ESI)-MS. The adduct peak found in vivo was confirmed with the less sensitive negative ESI-MS. In summary, these are new compounds and methods to determine isocyanate-specific adducts with albumin in workers exposed to HDI.

Literature review and evaluation of biomarkers, matrices and analytical methods for chemicals selected in the research program Human Biomonitoring for the European Union (HBM4EU)

Humans are potentially exposed to a large amount of chemicals present in the environment and in the workplace. In the European Human Biomonitoring initiative (Human Biomonitoring for the European Union = HBM4EU), acrylamide, mycotoxins (aflatoxin B1, deoxynivalenol, fumonisin B1), diisocyanates (4,4'-methylenediphenyl diisocyanate, 2,4- and 2,6-toluene diisocyanate), and pyrethroids were included among the prioritized chemicals of concern for human health. For the present literature review, the analytical methods used in worldwide biomonitoring studies for these compounds were collected and presented in comprehensive tables, including the following parameter: determined biomarker, matrix, sample amount, work-up procedure, available laboratory quality assurance and quality assessment information, analytical techniques, and limit of detection. Based on the data presented in these tables, the most suitable methods were recommended. According to the paradigm of biomonitoring, the information about two different biomarkers of exposure was evaluated: a) internal dose = parent compounds and metabolites in urine and blood; and b) the biologically effective = dose measured as blood protein adducts. Urine was the preferred matrix used for deoxynivalenol, fumonisin B1, and pyrethroids (biomarkers of internal dose). Markers of the biological effective dose were determined as hemoglobin adducts for diisocyanates and acrylamide, and as serum-albumin-adducts of aflatoxin B1 and diisocyanates. The analyses and quantitation of the protein adducts in blood or the metabolites in urine were mostly performed with LC-MS/MS or GC-MS in the presence of isotope-labeled internal standards. This review also addresses the critical aspects of the application, use and selection of biomarkers. For future biomonitoring studies, a more comprehensive approach is discussed to broaden the selection of compounds.

Identification and determination of phenyl methyl carbamate released from adducted hemoglobin for methyl isocyanate exposure verification

Methyl isocyanate (MIC), an intermediate in the synthesis of carbamate pesticides, is a toxic industrial chemical that causes irritation and damage to the eyes, respiratory tract, and skin. Due to the high reactivity of MIC, it binds to proteins to form protein adducts. While these adducts can be used as biomarkers to verify exposure to MIC, methods to detect MIC adducts are cumbersome, typically involving enzymatic (pronase) or strong acid (Edman degradation) hydrolysis of hemoglobin. Hence, in this study, a simple method was developed which utilizes base hydrolysis of MIC-tyrosine adducts from isolated hemoglobin to form phenyl methyl carbamate (PMC), followed by rapid liquid-liquid extraction, and liquid chromatography tandem mass spectrometry analysis. The hydrolysis chemistry is the first report of base hydrolysis of a tyrosine-β-C-hydroxo phenol bond in aqueous solution. The method produced excellent sensitivity (detection limit of 0.02 mg/kg), linearity (R² = 0.998, percent residual accuracies > 96), and dynamic range (0.06‒15 mg/kg). The accuracy and precision (100 ± 9% and < 10% relative standard deviation, respectively) of the method were outstanding compared to existing techniques. The validated method was able to detect significantly elevated levels of PMC from hemoglobin isolated from MIC-exposed rats.

Methylenediphenyl diisocyanate lysine conjugates in the urine of workers exposed to methylenediphenyl diisocyanate

Diisocyanates have long been a leading cause of occupational asthma. As control often relies on personal protective equipment and there is the potential for skin uptake, biological monitoring is often used to assess worker exposure. Current routine biological monitoring methods do not distinguish between a diisocyanate and the corresponding diamine exposure in urine samples; therefore, a specific urinary biomarker is desirable. Urine samples were obtained from a group of workers exposed to methylenediphenyl diisocyanate (MDI) where aerosol generation was unlikely. Lysine conjugates of MDI were extracted from urine by solid phase extraction; analysis was performed by liquid chromatography tandem mass spectrometry. Acetylated MDI-lysine (acMDI-Lys) conjugates were detected in 73% of samples tested from persons with exposure to MDI compared to 93% of samples that were positive for methylene dianiline (MDA) in hydrolysed urine. There was a weak but significant positive correlation between the two biomarkers (r² = 0.377). This is the first report detecting and quantifying acMDI-Lys in the urine of workers exposed to MDI, and acMDI-Lys may be a useful non-invasive biomarker in discriminating between MDI and MDA exposures.

HBM4EU Diisocyanates Study—Research Protocol for a Collaborative European Human Biological Monitoring Study on Occupational Exposure

Diisocyanates have long been a leading cause of occupational asthma in Europe, and recently, they have been subjected to a restriction under the REACH regulations. As part of the European Human Biomonitoring project (HBM4EU), we present a study protocol designed to assess occupational exposure to diisocyanates in five European countries. The objectives of the study are to assess exposure in a number of sectors that have not been widely reported on in the past (for example, the manufacturing of large vehicles, such as in aerospace; the construction sector, where there are potentially several sources of exposure (e.g., sprayed insulation, floor screeds); the use of MDI-based glues, and the manufacture of spray adhesives or coatings) to test the usability of different biomarkers in the assessment of exposure to diisocyanates and to provide background data for regulatory purposes. The study will collect urine samples (analysed for diisocyanate-derived diamines and acetyl–MDI–lysine), blood samples (analysed for diisocyanate-specific IgE and IgG antibodies, inflammatory markers, and diisocyanate-specific Hb adducts for MDI), and buccal cells (micronucleus analysis) and measure fractional exhaled nitric oxide. In addition, occupational hygiene measurements (air monitoring and skin wipe samples) and questionnaire data will be collected. The protocol is harmonised across the participating countries to enable pooling of data, leading to better and more robust insights and recommendations.

Absorption, distribution, metabolism, and excretion of methylene diphenyl diisocyanate and toluene diisocyanate: Many similarities and few differences

Methylene diphenyl diisocyanate (MDI) and toluene diisocyanate (TDI) are high production volume chemicals used for the manufacture of polyurethanes. For both substances, the most relevant adverse health effects after overexposure in the workplace are isocyanate-induced asthma, lung function decrement and, to a much lesser extent, skin effects. Over the last two decades many articles have addressed the reactivity of MDI and TDI in biological media and the associated biochemistry, which increased the understanding of their biochemical and physiological behavior. In this review, these new insights with respect to similarities and differences concerning the adsorption, distribution, metabolism, and excretion (ADME) of these two diisocyanates and the implications on their toxicities are summarized. Both TDI and MDI show very similar behavior in reactivity to biological macromolecules, distribution, metabolism, and excretion. Evidence suggests that the isocyanate (NCO) group is scavenged at the portal-of-entry and is not systemically available in unbound reactive form. This explains the lack of other than portal-of-entry toxicity observed in repeated-dose inhalation tests.

Quo vadis blood protein adductomics?

Chemicals are measured regularly in air, food, the environment, and the workplace. Biomonitoring of chemicals in biological fluids is a tool to determine the individual exposure. Blood protein adducts of xenobiotics are a marker of both exposure and the biologically effective dose. Urinary metabolites and blood metabolites are short term exposure markers. Stable hemoglobin adducts are exposure markers of up to 120 days. Blood protein adducts are formed with many xenobiotics at different sites of the blood proteins. Newer methods apply the techniques developed in the field of proteomics. Larger adducted peptides with 20 amino acids are used for quantitation. Unfortunately, at present the methods do not reach the limits of detection obtained with the methods looking at single amino acid adducts or at chemically cleaved adducts. Therefore, to progress in the field new approaches are needed.

Characterizing Adduct Formation of Electrophilic Skin Allergens with Human Serum Albumin and Hemoglobin

Skin (contact) allergy, the most predominant form of immunotoxicity in humans, is caused by small electrophilic compounds (haptens) that modify endogenous proteins. Approximately 20% of the general population in the Western world is affected by contact allergy. Although the importance of the hapten–protein conjugates is well established in the initiation of the immunological reaction, not much progress has been made regarding identification of these conjugates in vivo or exploration of their potential as diagnostic tools. In this study, the human serum albumin (HSA) and human hemoglobin (Hb) adductome for three representative contact allergens with different chemical properties, 1-chloro-2,4-dinitrobenzene (DNCB), 1,2-epoxy-3-phenoxypropane (PGE), and 2-bromo-2-(bromomethyl)glutaronitrile (MDBGN), were studied. Plasma and red blood cell lysate were used as a source for HSA and Hb, respectively. The Direct Peptide Reactivity Assay was used to investigate adduct formation of MDBGN with nucleophilic moieties and revealed that MDGBN is converted to 2-methylenepentanedinitrile in the presence of sulfhydryl groups prior to adduct formation. Following incubation of HSA and Hb with haptens, an Orbitrap Q Exactive high-resolution mass spectrometer was used to perform an initial untargeted analysis to screen for adduct formation, followed by confirmation by targeted Parallel Reaction Monitoring analysis. Although a subset of adducted sites was confirmed by targeted analysis, only some of the adducted peptides showed an increase in the relative amount of the adducted peptide with an increased concentration of hapten. In total, seven adduct sites for HSA and eight for Hb were confirmed for DNCB and PGE. These sites are believed to be the most reactive. Further, three of the HSA sites (Cys₃₄, Cys₆₂, and Lys₁₉₀) and six of the Hb sites (subunit α: Val₁, His₄₅, His₇₂; subunit β: Cys₉₃, His₉₇, and Cys₁₁₂) were haptenated already at the lowest level of hapten to protein molar ratio (0.1:1), indicating that these sites are the most likely to be modified in vivo. To the best of our knowledge, this is the first time that the adductome of Hb has been studied in the context of contact allergens. Identification of the most reactive sites of abundant proteins, such as HSA and Hb, is the first step toward identification of contact allergy biomarkers that can be used for biomonitoring and to develop better diagnostic tools based on a blood sample.

Is It Realistic to Propose Determination of a Lifetime Internal Exposome?

Biomonitoring of xenobiotics has been performed for many years in occupational and environmental medicine. It has revealed hidden exposures and the exposure of workers could be reduced. Although most of the toxic effects of chemicals on humans were discovered in workers, the scientific community has more recently focused on environmental samples. In several countries, urinary and blood samples have been collected and analyzed for xenobiotics. Health, biochemical, and clinical parameters were measured in the biomonitoring program of the Unites States. The data were collected and evaluated as group values, comparing races, ages, and gender. The term exposome was created in order to relate chemical exposure to health effects together with the terms genome, proteome, and transcriptome. Internal exposures were mostly established with snapshot measurements, which can lead to an obvious misclassification of the individual exposures. Albumin and hemoglobin adducts of xenobiotics reflect the exposure of a larger time frame, up to 120 days. It is likely that only a small fraction of xenobiotics form such adducts. In addition, adduct analyses are more work intensive than the measurement of xenobiotics and metabolites in urine and/or blood. New technology, such as high-resolution mass spectrometry, will enable the discovery of new compounds that have been overlooked in the past, since over 300,000 chemicals are commercially available and most likely also present in the environment. Yet, quantification will be challenging, as it was for the older methods. At this stage, determination of a lifetime internal exposome is very unrealistic. Instead of an experimental approach with a large number of people, which is economically and scientifically not feasible, in silico methods should be developed further to predict exposure, toxicity, and potential health effects of mixtures. The computer models will help to focus internal exposure investigations on smaller groups of people and smaller number of chemicals.

Biomonitoring for Occupational Exposure to Diisocyanates: A Systematic Review

Diisocyanates are a group of chemicals that are widely used in occupational settings. They are known to induce various health effects, including skin- and respiratory tract sensitization resulting in allergic dermatitis and asthma. Exposure to diisocyanates has been studied in the past decades by using different types of biomonitoring markers and matrices. The aim of this review as part of the HBM4EU project was to assess: (i) which biomarkers and matrices have been used for biomonitoring diisocyanates and what are their strengths and limitations; (ii) what are (current) biomonitoring levels of the major diisocyanates (and metabolites) in workers; and (iii) to characterize potential research gaps. For this purpose we conducted a systematic literature search for the time period 2000-end 2018, thereby focussing on three types of diisocyanates which account for the vast majority of the total isocyanate market volume: hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and 4,4'-methylenediphenyl diisocyanate (MDI). A total of 28 publications were identified which fulfilled the review inclusion criteria. The majority of these studies (93%) investigated the corresponding diamines in either urine or plasma, but adducts have also been investigated by several research groups. Studies on HDI were mostly in the motor vehicle repair industry [with urinary hexamethylene diamine result ranging from 0.03 to 146.5 µmol mol-1 creatinine]. For TDI, there is mostly data on foam production [results for urinary toluene diamine ranging from ~0.01 to 97 µmol mol-1 creatinine] whereas the available MDI data are mainly from the polyurethane industry (results for methylenediphenyl diamine range from 0.01 to 32.7 µmol mol-1 creatinine). About half of the studies published were prior to 2010 hence might not reflect current workplace exposure. There is large variability within and between studies and across sectors which could be potentially explained by several factors including worker or workplace variability, short half-lives of biomarkers, and differences in sampling strategies and analytical techniques. We identified several research gaps which could further be taken into account when studying diisocyanates biomonitoring levels: (i) the development of specific biomarkers is promising (e.g. to study oligomers of HDI which have been largely neglected to date) but needs more research before they can be widely applied, (ii) since analytical methods differ between studies a more uniform approach would make comparisons between studies easier, and (iii) dermal absorption seems a possible exposure route and needs to be further investigated. The use of MDI, TDI, and HDI has been recently proposed to be restricted in the European Union unless specific conditions for workers' training and risk management measures apply. This review has highlighted the need for a harmonized approach to establishing a baseline against which the success of the restriction can be evaluated.

A validated UPLC-MS/MS method for the determination of aliphatic and aromatic isocyanate exposure in human urine

4,4'-Methylenediphenyldiisocyanate (MDI), toluenediisocyanate (2,4-TDI and 2,6-TDI), and 1,6'-hexamethylenediisocyanate (HDI) are all commonly used in the production of polyurethane-containing materials in different application areas. Workers exposed occupationally to these compounds may develop sensitization with the potential to lead to asthma. Isocyanates are metabolized in vivo by conjugation to macromolecules and/or by acetylation prior to being eliminated in urine. The hydrolysis of urine samples releases free amine compounds from these metabolites as biomarkers of exposure, specific to each parent isocyanate: 4,4'-methylenedianiline (MDA), toluenediamine (2,4-TDA and 2,6-TDA), and hexamethylenediamine (HDA). To address the need for a validated method that could be used for the simultaneous determination of biomarkers of aliphatic and aromatic isocyanates to monitor occupational exposure based on recommended thresholds, we have developed an UPLC-MS/MS method for the quantitation of MDA, TDA isomers, and HDA following acid hydrolysis, solid-phase extraction, and derivatization of urine samples. Free amine compounds were derivatized with acetic anhydride to augment chromatographic retention and signal intensity. The method was developed considering the biological guidance value (BGV) of MDA at 10 μg L^-1, and biological exposure indices (BEI) of TDA isomers and HDA at 5 μg g^-1 and 15 μg g^-1 creatinine, respectively. Limits of detection allowed monitoring down to 6% of BGV/BEI, with precision within 8%. The accuracy and reliability of the method were assessed using inter-laboratory reference samples and deemed acceptable based on three rounds of measurements. This novel method has therefore been proven as useful for occupational safety and health assessments. Graphical Abstract.

Dilysine-Methylene Diphenyl Diisocyanate (MDI), a Urine Biomarker of MDI Exposure?

Biomonitoring of methylene diphenyl diisocyanate (MDI) in urine may be useful in industrial hygiene and exposure surveillance approaches toward disease (occupational asthma) prevention and in understanding pathways by which the internalized chemical is excreted. We explored possible urine biomarkers of MDI exposure in mice after respiratory tract exposure to MDI, as glutathione (GSH) reaction products (MDI-GSH), and after skin exposure to MDI dissolved in acetone. LC-MS analyses of urine identified a unique m/ z 543.29 [M + H]+ ion from MDI-exposed mice but not from controls. The m/ z 543.29 [M + H]+ ion was detectable within 24 h of a single MDI skin exposure and following multiple respiratory tract exposures to MDI-GSH reaction products. The m/ z 543.29 [M + H]+ ion possessed properties of dilysine-MDI, including (a) an isotope distribution pattern for a molecule with the chemical formula C27H38N6O6, (b) the expected collision-induced dissociation (CID) fragmentation pattern upon MS/MS, and (c) a retention time in reversed-phase LC-MS identical to that of synthetic dilysine-MDI. Further MDI-specific Western blot studies suggested albumin (which contains multiple dilysine sites susceptible to MDI carbamylation) as a possible source for dilysine-MDI and the presence of MDI-conjugated albumin in urine up to 6 days after respiratory tract exposure. Two additional [M + H]+ ions ( m/ z 558.17 and 863.23) were found exclusively in urine of mice exposed to MDI-GSH via the respiratory tract and possessed characteristics of previously described cyclized MDI-GSH and oxidized glutathione (GSSG)-MDI conjugates, respectively. Together the data identify urinary biomarkers of MDI exposure in mice and possible guidance for future translational investigation.

A validated liquid chromatography/tandem mass spectrometry method for 4,4'-methylenedianiline quantitation in human urine as a measure of 4,4'-methylene diphenyl diisocyanate exposure

RATIONALE

4,4'-Methylene diphenyl diisocyanate (MDI) is a highly reactive isocyanate used in the production of polyurethanes. Workers exposed to these products may develop sensitization to the diisocyanate compounds, leading to occupational asthma. Quantifying MDI levels is necessary to ensure workplace safety. MDI is metabolized by acetylation and/or conjugation to macromolecules for excretion into urine. All metabolites can be chemically hydrolyzed to form the free diamine 4,4'-methylenedianiline (MDA) as a urinary biomarker of MDI exposure. Current methods involve long sample preparation, or have been designed using costly automation. There is therefore a need to develop a new practical method for assessing exposure to MDI.

METHODS

Urine samples were acidified and heated to form MDA, followed by neutralization and liquid-liquid extraction. Extracts were separated by reversed-phase chromatography on a HSS T3 column followed by analysis on a triple quadrupole mass spectrometer in multiple reaction monitoring (MRM) mode.

RESULTS

¹³ C¹⁵ N-MDA was selected as the internal standard (IS) of choice following an investigation of internal standard stability. The hydrolysis efficiency, forming free MDA from conjugated metabolites in vivo, was evaluated using 4,4'-methylenebis(acetanilide) spiked into urine and complete hydrolysis occurred after 1 h. A dynamic range of 5 to 500 nM was achieved, and was useful for monitoring MDI exposure considering the biological guidance value (BGV) of 10 μg/L (~50 nM) proposed by the German Research Foundation (DFG). The limit of detection (LOD) and limit of quantification (LOQ) of the method were 0.8 and 2.7 nM, respectively. The intra-day and inter-day precisions were 4.33% and 4.27%, respectively. Finally, the method was tested with inter-laboratory samples from the German External Quality Assessment Scheme (G-EQUAS) program and the results submitted were all within the allowable tolerance range.

CONCLUSIONS

A practical and validated method for the analysis of small- to medium-sized batches of samples has been developed for the biological monitoring of MDI exposure in human urine.

Hemoglobin Adducts and Urinary Metabolites of Arylamines and Nitroarenes

Arylamines and nitroarenes are intermediates in the production of pharmaceuticals, dyes, pesticides, and plastics and are important environmental and occupational pollutants. N-Hydroxyarylamines are the toxic common intermediates of arylamines and nitroarenes. N-Hydroxyarylamines and their derivatives can form adducts with hemoglobin (Hb-adducts), albumin, DNA, and tissue proteins in a dose-dependent manner. Most of the arylamine Hb-adducts are labile and undergo hydrolysis in vitro, by mild acid or base, to form the arylamines. According to current knowledge of arylamine adduct-formation, the hydrolyzable fraction is derived from the reaction products of the arylnitroso derivatives that yield arylsulfinamide adducts with cysteine. Hb-adducts are markers for the bioavailability of N-hydroxyarylamines. Hb-adducts of arylamines and nitroarenes have been used for many biomonitoring studies for over 30 years. Hb-adducts reflect the exposure history of the last four months. Biomonitoring of urinary metabolites is a less invasive process than biomonitoring blood protein adducts, and urinary metabolites have served as short-lived biomarkers of exposure to these hazardous chemicals. However, in case of intermittent exposure, urinary metabolites may not be detected, and subjects may be misclassified as nonexposed. Arylamines and nitroarenes and/or their metabolites have been measured in urine, especially to monitor the exposure of workers. This review summarizes the results of human biomonitoring studies involving urinary metabolites and Hb-adducts of arylamines and nitroarenes. In addition, studies about the relationship between Hb-adducts and diseases are summarized.

Mass spectrometry-based analysis of murine bronchoalveolar lavage fluid following respiratory exposure to 4,4'-methylene diphenyl diisocyanate aerosol

1. Diisocyanates are highly reactive electrophiles utilized in the manufacture of a wide range of polyurethane products and have been identified as causative agents of occupational allergic respiratory disease. However, in spite of the significant occupational health burden associated with diisocyanate-induced asthma, the mechanism of disease pathogenesis remains largely unknown. 2. To better understand the fate of inhaled diisocyanates, a nose-only aerosol exposure system was constructed and utilized to expose a BALB/c mouse model to an aerosol generated from 4,4'-methylene diphenyl diisocyanate (MDI). Tissue and bronchoalveolar lavage samples were evaluated 4 and 24 h post-exposure for evidence of diisocyanate-protein haptenation, and a label-free quantitative proteomics strategy was employed to evaluate relative changes to the protein content of the cellular fraction of the lavage fluid. 3. Following MDI aerosol exposure, expression of the number of proteins with immunological or xenobiotic metabolism relevance is increased, including endoplasmin, cytochrome P450 and argininosuccinate synthase. Western blot analysis indicated MDI-conjugated protein in the lavage fluid, which was identified as serum albumin. 4. Tandem mass spectrometry analysis of MDI-albumin revealed MDI conjugation occurs at a dilysine motif at Lys525, as well as at a glutamine-lysine motif at Lys414, in good agreement with previously published in vitro data on diisocyanate-conjugated serum albumin.

Biomonitoring Human Albumin Adducts: The Past, the Present, and the Future

Serum albumin (Alb) is the most abundant protein in blood plasma. Alb reacts with many carcinogens and/or their electrophilic metabolites. Studies conducted over 20 years ago showed that Alb forms adducts with the human carcinogens aflatoxin B1 and benzene, which were successfully used as biomarkers in molecular epidemiology studies designed to address the role of these chemicals in cancer risk. Alb forms adducts with many therapeutic drugs or their reactive metabolites such as β-lactam antibiotics, acetylsalicylic acid, acetaminophen, nonsteroidal anti-inflammatory drugs, chemotherapeutic agents, and antiretroviral therapy drugs. The identification and characterization of the adduct structures formed with Alb have served to understand the generation of reactive metabolites and to predict idiosyncratic drug reactions and toxicities. The reaction of candidate drugs with Alb is now exploited as part of the battery of screening tools to assess the potential toxicities of drugs. The use of gas chromatography-mass spectrometry, liquid chromatography, or liquid chromatography-mass spectrometry (LC-MS) enabled the identification and quantification of multiple types of Alb xenobiotic adducts in animals and humans during the past three decades. In this perspective, we highlight the history of Alb as a target protein for adduction to environmental and dietary genotoxicants, pesticides, and herbicides, common classes of medicinal drugs, and endogenous electrophiles, and the emerging analytical mass spectrometry technologies to identify Alb-toxicant adducts in humans.

Comparison of biological effects with albumin adducts of 4,4'-methylenediphenyl diisocyanate in workers

Lung sensitization and asthma are the main health effects of 4,4'-methylenediphenyl diisocyanate (MDI). Albumin adducts (isocyanate-specific adducts) of MDI might be involved in the etiology of sensitization reactions. Albumin adducts of MDI were analyzed in sera of diisocyanate-exposed worker with and without diisocyanate occupational asthma (DA), as well as in exposed workers with and without diisocyanate-specific IgG antibodies. In DA-positive workers and IgG-positive workers, albumin adducts were significantly higher versus workers without DA and those who were specific IgG negative. The odds ratio to be DA-positive was 57 times larger for workers with adduct levels above 230 fmol/mg. The odds ratio to be IgG-positive was 10 times larger for workers with adduct levels above 113 fmol/mg. Therefore, albumin adducts appear to be a good predictor of the biological effects. The albumin-adduct levels in workers without biological effects were in the range of the adduct levels found in previous studies of healthy MDI-factory and construction site workers.

Determination of albumin adducts of 4,4'-methylenediphenyl diisocyanate after specific inhalative challenge tests in workers

4,4'-Methylenediphenyl diisocyanate (MDI) is the most important isocyanate used in the industry. Lung sensitization with bronchial asthma is the main disorder in exposed workers. Albumin adducts of MDI might be involved in specific immunological reactions. MDI adducts with lysine (MDI-Lys) of albumin have been found in MDI-workers and construction workers. MDI-Lys is an isocyanate-specific adduct of MDI with albumin. In the present study, we report MDI-adducts in workers undergoing diagnostic MDI challenge tests. The workers were exposed for 2h to 5ppb of MDI. The adduct levels increase significantly after the exposure to MDI in the challenge chamber. About 0.6% of the dose was bound to albumin. So far, only urinary metabolites of MDI were measured to monitor isocyanate workers. However, such urinary metabolites are not isocyanate specific. Therefore, we propose to measure albumin adducts for monitoring MDI exposed subjects.

Determination of albumin adducts of 4,4'-methylenediphenyl diisocyanate in workers of a 4,4'-methylenedianiline factory

Lung sensitization and asthma are the main health effects of 4,4'-methylenediphenyl diisocyanate (MDI). Albumin adducts (isocyanate specific adducts) of MDI might be involved in the etiology of sensitization reactions. Albumin adducts of MDI have been found in subjects classified as 4,4'-methylenedianiline (MDA) workers. The mean adduct levels in these MDA-workers were 1.5 times higher than in MDI-workers of the same company. MDA-specific hemoglobin adducts, were present ten times more in the MDA-workers than in the MDI-workers. MDA-workers with specific work task had significantly higher albumin adduct levels.

Does diisocyanate exposure result in neurotoxicity?

CONTEXT

Diisocyanates have been associated with respiratory and dermal sensitization. Limited number of case reports, and a few case studies, media, and other references suggest potential neurotoxic effects from exposures to toluene diisocyanate (TDI), 1,6 hexamethylene diisocyanate (HDI), and methylene diisocyanate (MDI). However, a systematic review of the literature evaluating the causal association on humans does not exist to support this alleged association.

OBJECTIVE

To perform systematic review examining the body of epidemiologic evidence and provide assessment of causal association based on principles of the Sir Austin Bradford Hill criteria or considerations for causal analysis.

METHODS

A comprehensive search of public databases for published abstracts, case reports, cross-sectional surveys, and cohort studies using key search terms was conducted. Additional searches included regulatory reviews, EU IUCLID and EU Risk Assessment databases, and unpublished reports in the International Isocyanate Institute database. An expert panel consisting of physicians, toxicologists, and an epidemiologist critically reviewed accepted papers, providing examination of epidemiologic evidence of each report. Finally, the Hill criteria for causation were applied to the summative analysis of identified reports to estimate probability of causal association.

RESULTS

Twelve papers reporting exposed populations with a variety of neurological symptoms or findings suitable for analysis were identified, including eleven case or case series reports, and one cross-sectional study. Three papers reported on the same population. Each of the papers was limited by paucity of diisocyanate exposure estimates, the presence of confounding exposures to known or suspected neurotoxicants, a lack of objective biological measures of exposure or neurotoxic effects, and lack of relative strength of association measures. Additionally, reported health symptoms and syndromes lacked consistency or specificity. No plausible mechanism of toxicity was found. Application of a predictive mathematical model for determining probability of causal association for neurotoxicity was calculated to be 21%.

CONCLUSION

There is insufficient evidence for a causal association of neurotoxic effects and diisocyanate exposure based on lack of evidence in all categories of the Hill criteria for causality except for temporal association of reported symptoms and alleged exposure. Future reports should attempt to address more rigorous exposure assessment and control for confounding exposures.

A murine monoclonal antibody with broad specificity for occupationally relevant diisocyanates

Diisocyanates (dNCOs) used in industrial applications are well known low molecular weight allergens. Occupational exposure is associated with adverse health outcomes including allergic sensitization and occupational asthma. In this study, we report the production and initial characterization of a dNCO-hapten specific murine IgM monoclonal antibody (mAb). Female BALB/c mice were immunized intraperitoneally with 25 μg of 4,4'-methylene diphenyl diisocyanate (MDI)-keyhole limpet hemocyanin. Following six biweekly booster immunizations, splenocytes were recovered and fused to Sp2/0-Ag14 murine myeloma cell line for hybridoma production. Hybridomas were then screened in a solid-phase indirect enzyme-linked immunosorbent assay (ELISA) against 40:1 4,4'-MDI- human serum albumin (HSA). mAb reactivity to dNCO-HSA conjugates and dNCO-HSA spiked human serum were characterized using a sandwich ELISA. One hybridoma produced a multimeric IgM mAb (15D4) that reacted with 4,4'-MDI-HSA. Sandwich ELISA analysis demonstrated comparable reactivity with other occupationally relevant dNCO-HSA adducts, including 2,4-toluene diisocyanate (TDI)-HSA, 2,6-TDI-HSA, and 1,6-hexamethylene diisocyanate (HDI)-HSA, but not other electrophilic chemical HSA conjugates. The limit of quantification (LOQ) of 4,4'-MDI-HSA, 2,4-TDI-HSA, 2,6-TDI-HSA, and 1,6-HDI-HSA sandwich ELISAs were 567.2, 172.7, 184.2, and 403.5 ng/mL (8.67, 2.60, 2.77, and 6.07 pmol/mL), respectively. In contrast, experiments using dNCO-supplemented human sera showed an increase in the detectable limit of the assay. A mAb has been produced that has potential utility for detecting mixed diisocyanate exposures in occupational environments. The mAb may have additional utility in the standardization of specific IgE detection immunoassays as well as chromatographic-mass spectrometric methods to enrich dNCO adducted HSA in the plasma of occupationally exposed workers.

Quantitation of 4,4'-methylene diphenyl diisocyanate human serum albumin adducts

4,4′-Methylene diphenyl diisocyanate (herein 4,4′-MDI) is used in the production of polyurethane foams, elastomers, coatings, adhesives and the like for a wide range of commercial products. Occupational exposure to MDI levels above current airborne exposure limits can elicit immune mediated hypersensitivity reactions such as occupational asthma in sensitive individuals. To accurately determine exposure, there has been increasing interest in developing analytical methods to measure internal biomarkers of exposure to MDI. Previous investigators have reported methodologies for measuring MDI diamine metabolites and MDI-Lysine (4,4′-MDI-Lys) adducts. The purpose of this study was to develop and validate an ultra performance liquid chromatography isotope dilution tandem mass spectrometry (UPLC-ID/MS/MS) quantitation method via a signature peptide approach to enable biomonitoring of 4,4′-MDI adducted to human serum albumin (HSA) in plasma. A murine, anti-4,4′-MDI monoclonal IgM antibody was bound to magnetic beads and utilized for enrichment of the MDI adducted HSA. Following enrichment, trypsin digestion was performed to generate the expected 414 site (primary site of adduction) 4,4′-MDI-adducted HSA signature peptide that was quantified by UPLC-ID/MS/MS. An Agilent 6530 UPLC/quadrupole time of flight MS (QTOF) system was utilized for intact adducted protein analysis and an Agilent 6490 UPLC/MS/MS system operated in multiple reaction monitoring (MRM) mode was utilized for quantification of the adducted signature peptide biomarker both for in chemico and worker serum samples. Worker serum samples were initially screened utilizing the previously developed 4,4′-MDI-Lys amino acid method and results showed that 12 samples were identified as quantifiable for 4,4′-MDI-Lys adducts. The signature peptide adduct approach was applied to the 12 worker samples identified as quantifiable for 4,4′-MDI-Lys adducts. Results indicated no positive results were obtained above the quantification limit by the signature peptide approach. If the 414 site of lysine adduction accounted for 100% of the 4,4′-MDI adductions in the signature peptide adduct approach, the three highest quantifiable samples by the 4,4′-MDI-Lys method should have at least been detectable by the signature peptide method. Results show that although the 4,4′-MDI signature peptide approach is more selective, it is 18 times less sensitive than the 4,4′-MDI-Lys method, thus limiting the ability to detect adduct levels relative to the 4,4′-MDI-Lys amino acid method.

Synthetic approaches to obtain amino acid adducts of 4,4'-methylenediphenyl diisocyanate

4,4'-Methylenediphenyl diisocyanate (MDI) is the most important isocyanate used in the chemical industry. Lung sensitization and asthma are the main types of damage after exposure to MDI. Albumin adducts of MDI might be involved in the etiology of sensitization reactions. It is therefore necessary to have sensitive and specific biomarkers such as blood protein adducts to monitor people exposed to isocyanates. For the discovery of new isocyanate adducts with blood proteins present in vivo, new synthetic standards are needed. To achieve this, we developed five methods to obtain amino acid adducts of MDI. We synthesized and isolated MDI adducts of aspartic acid, glutamic acid, cysteine, and valine. The new adducts were characterized by LC-MS/MS and NMR. We synthesized the corresponding isotope-labeled MDI adducts to develop analytical methods using LC-MS/MS. Glutathione adducts of isocyanates are an important way of transportation of the reactive isocyanates to distant sites from the original site of exposure. Therefore, we used N-acetyl-cysteine adducts of MDI as reactants: N-acetyl-S-[[4-(4-aminobenzyl)phenyl]carbamoyl]-cysteine (MDI-AcCys) and N-acetyl-S-[[4-(4-acetylaminobenzyl)phenyl]carbamoyl]-cysteine (AcMDI-AcCys). MDI-AcCys or AcMDI-AcCys formed adducts with albumin, N(α)-acetyl lysine, and valine. Isotope-labeled albumin adducts (= d(4)-MDI-albumin) were synthesized from d(4)-MDI-AcCys and albumin. d(4)-MDI-albumin can be used as an internal standard to analyze biological samples. Such an internal standard will not correct only for the extraction recovery of the adducts but also for the potential variation of the enzymatic digestions used in the procedure to analyze albumin adducts of MDI. The synthetic procedures described in this manuscript will be applicable to the synthesis of amino acid adducts from other isocyanates.

Is specific IgE antibody analysis feasible for the diagnosis of methylenediphenyl diisocyanate-induced occupational asthma?

Purpose

Early recognition improves the prognosis of isocyanate asthma. A major unanswered question is whether IgE-dependent mechanisms are of diagnostic value? Our objective was to appraise serological methods using various methylenediphenyl diisocyanate (MDI)-albumin conjugates and weigh up the data versus the outcome of standardized comprehensive clinical diagnostics to evaluate the viability of immunological analysis in supportive MDI-asthma diagnosis (OA_I).

Methods

Specific IgE (sIgE) and IgG (sIgG) binding was measured with fluorescence enzyme immunoassay in 43 study subjects (using conjugates prepared in-vapor, in-solution and commercial preparations). The differential clinical diagnosis included standardized measurement of pulmonary function, non-specific bronchial hyper-responsiveness, specific MDI-prick test (MDI-SPT) and specific inhalation challenge (MDI-SIC).

Results

Detailed diagnostic scheme allows the differential OA_I and MDI-induced hypersensitivity pneumonitis (P_I). The presumed OA_I diagnoses were confirmed in 84 % (45 % cases having demonstrable sIgE antibodies) with RR 5.7, P > 0.001, when OA_I diagnosis is correlated with MDI-SIC/MDI-SPT (RR 1.28 for MDI-SIC alone); sIgG antibodies were clinically relevant for P_I and not for the OA diagnosis. MDI-specific IgE data generated with commercial ImmunoCAP preparations show high correlation with our in-vapor generated MDI conjugates.

Conclusions

Isocyanate-specific IgE antibodies are not always detectable but their presence is strongly predictive of OA_I and supportive for the diagnosis. MDI-SPT can be a valuable parameter differentiating OA_I and P_I. We have confirmed and extended published data showing that isocyanate-albumin conjugates perform better in specific antibody assays when prepared with volatile phase formulations and would like to stress additionally the necessity for further refinements and standardization in clinical diagnostics procedures.

Electronic supplementary material

The online version of this article (doi:10.1007/s00420-012-0772-6) contains supplementary material, which is available to authorized users.

Determination of isocyanate specific albumin-adducts in workers exposed to toluene diisocyanates

Toluene diisocyanates (2,4-TDI and 2,6-TDI) are important intermediates in the chemical industry. Among the main damages after low levels of TDI exposure are lung sensitization and asthma. It is therefore necessary to have sensitive and specific methods to monitor isocyanate exposure of workers. Urinary metabolites or protein adducts have been used as biomarkers in workers exposed to TDI. However, with these methods it was not possible to determine if the biomarkers result from exposure to TDI or to the corresponding toluene diamines (TDA). This work presents a new procedure for the determination of isocyanate-specific albumin adducts. Isotope dilution mass spectrometry was used to measure the adducts in albumin present in workers exposed to TDI. 2,4-TDI and 2,6-TDI formed adducts with lysine: N(ϵ)-[({3-amino-4-methylphenyl}amino)carbonyl]-lysine, N(ϵ)-[({5-amino-2-methylphenyl}amino)carbonyl]-lysine, and N(ϵ)- [({3-amino-2-methylphenyl}amino)carbonyl]-lysine. In future studies, this new method can be applied to measure TDI-exposures in workers.

Production, characterization and utility of a panel of monoclonal antibodies for the detection of toluene diisocyanate haptenated proteins

Diisocyanates (dNCOs) are highly reactive low molecular weight chemicals used in the manufacture of polyurethane products and are the most commonly reported cause of occupational asthma. Mechanistic disease studies and development of biomonitoring and research tools, such as monoclonal antibodies (mAbs) have been hampered by dNCOs' ability to self-polymerize and to cross-link biomolecules. Toluene diisocyanate (TDI)-specific monoclonal antibodies (mAbs), with potential use in immunoassays for exposure and biomarker assessments, were produced and reactivities characterized against mono- and diisocyanate and dithioisocyanate protein conjugates. In general, TDI reactive mAbs displayed stronger recognition of isocyanate haptenated proteins when the NCO was in the ortho position relative to the tolyl group, and were capable of discriminating between isocyanate and isothiocyanate conjugates and between aromatic and aliphatic dNCOs. Preliminary studies using TDI vapor exposed cells suggest potential utility of these mAbs for both research and biomonitoring.

Protein adducts as biomarkers of exposure to aromatic diisocyanates in workers manufacturing polyurethane (PUR) foam

This work was undertaken to investigate the usefulness of diisocyanate-related protein adducts in blood samples as biomarkers of occupational exposure to toluene diisocyanate (TDI; 2,4- and 2,6-isomers) and 4,4'-methylenediphenyl diisocyanate (MDI). Quantification of adducts as toluene diamines (TDAs) and methylenedianiline (MDA) was performed on perfluoroacylated derivatives by gas chromatography-mass spectrometry (GC-MS/MS) in negative chemical ionisation mode. TDI-derived adducts were found in 77% of plasma and in 59% of globin samples from exposed workers manufacturing flexible polyurethane foam. The plasma levels ranged from 0.003 to 0.58 nmol mL(-1) and those in globin from 0.012 to 0.33 nmol g(-1). The 2,6-isomer amounted to about two-thirds of the sum concentration of TDA isomers. MDI-derived adducts were detected in 3.5% of plasma and in 7% of globin samples from exposed workers manufacturing rigid polyurethane foam. A good correlation was found between the sum of TDA isomers in urine and that in plasma. The relationship between globin adducts and urinary metabolites was ambiguous. Monitoring TDI-derived TDA in plasma thus appears to be an appropriate method for assessing occupational exposure. Contrary to TDI exposure, adducts in plasma or globin were not useful in assessing workers' exposure to MDI. An important outcome of the study was that no amine-related adducts were detected in globin samples from TDI- or MDI-exposed workers, alleviating concerns that TDI or MDI might pose a carcinogenic hazard. Further studies are nevertheless required to judge whether diisocyanates per se could be such a hazard.