Permeability study of ciprofloxacin from ultra-thin nanofibrous film through various mucosal membranes

OphthalMimic: A new alternative apparatus without animal tissue for the evaluation of topical ophthalmic drug products

The necessity of animal-free performance tests for novel ophthalmic formulation screening is challenging. For this, we developed and validated a new device to simulate the dynamics and physical-chemical barriers of the eye for in vitro performance tests of topic ophthalmic formulations. The OphthalMimic is a 3D-printed device with an artificial lacrimal flow, a cul-de-sac area, a support base, and a simulated cornea comprised of a polymeric membrane containing poly-vinyl alcohol 10 % (w/v), gelatin 2.5 % (w/v), and different proportions of mucin and poloxamer, i.e., 1:1 (M1), 1:2 (M2), and 2:1 (M3) w/v, respectively. The support base is designed to move between 0° and 50° to replicate the movement of an eyelid. We challenged the model by testing the residence performance of poloxamer®407 16 % and poloxamer®407 16 % + chitosan 1 % (PLX16CS10) gels containing fluconazole. The test was conducted with a simulated tear flow of 1.0 mL.min-1 for 5 min. The OphthalMimic successfully distinguished PLX16 and PLX16C10 formulations based on their fluconazole drainage (M1: 65 ± 14 % and 27 ± 10 %; M2: 58 ± 6 % and 38 ± 9 %; M3: 56 ± 5 % and 38 ± 18 %). In conclusion, the OphthalMimic is a promising tool for comparing the animal-free performance of ophthalmic formulations.

Comparison of Nozzle-Based and Nozzle-Free Electrospinning for Preparation of Fast-Dissolving Nanofibers Loaded with Ciprofloxacin

The study aimed to prepare ciprofloxacin-loaded polyvinylpyrrolidone electrospun nanofibers for oral drug delivery, using a conventional nozzle-based and a lab-built nozzle-free electrospinning equipment. To produce nanofibers, electrospinning is the process most often used. However, from the industry’s point of view, conventional electrospinning does not have sufficiently high productivity. By omitting the nozzle, productivity can be increased, and so the development of nozzle-free processes is worthwhile. In this study, a solution of ciprofloxacin and polyvinylpyrrolidone was electrospun under similar conditions, using both single-nozzle and nozzle-free methods. The two electrospinning methods were compared by investigating the morphological and physicochemical properties, homogeneity, in vitro drug release, and cytotoxicity. The stability of the nanofibers was monitored from different aspects in a 26 month stability study. The results showed that the use of the nozzle-free electrospinning was preferable due to a higher throughput, improved homogeneity, and the enhanced stability of nanofiber mats, compared to the nozzle-based method. Nevertheless, fast dissolving nanofibers loaded with poorly water-soluble ciprofloxacin were produced by both electrospinning methods. The beneficial properties of these nanofibers can be exploited in innovative drug development; e.g., nanofibers can be formulated into orodispersible films or per os tablets.

Green Nanotechnology in the Formulation of a Novel Solid Dispersed Multilayered Core-Sheath Raloxifene-Loaded Nanofibrous Buccal Film; In Vitro and In Vivo Characterization

Green nanotechnology utilizes the principles of green chemistry to formulate eco-friendly nanocarrier systems to mitigate patients and environment hazards. Raloxifene (RLX) demonstrates poor aqueous solubility (BCS class II) and low bioavailability, only 2% (extensive first-pass metabolism). The aim of this study is to enhance RLX solubility and bioavailability via development of novel solid dispersed multilayered core-sheath RLX-loaded nanofibers (RLX-NFs) without the involvement of organic solvents. A modified emulsion electrospinning technique was developed. Electrospinning of an RLX-nanoemulsion (RLX-NE) with polymer solution (poly vinyl alcohol (PVA), hydroxypropyl methylcellulose (HPMC), and chitosan (CS) in different volume ratios (1:9, 2:8, and 4:6) using D-optimal response surface methodology was adopted. In vitro characterization of RLX-loaded NFs was performed; scanning electron microscope (SEM), thermal analysis, drug content, release studies, and bioadhesion potential. The optimum NFs formula was evaluated for morphology using high-resolution transmission electron microscopy (HRTEM), and ex vivo drug permeation. The superiority of E2 (comprising RLX-NE and PVA (2:8)) over other NF formulae was statistically observed with respect to Q60 (56.048%), Q240 (94.612%), fiber size (594.678 nm), mucoadhesion time 24 h, flux (5.51 µg/cm2/h), and enhancement ratio (2.12). RLX pharmacokinetics parameters were evaluated in rabbits following buccal application of NF formula E2, relative to RLX oral dispersion. E2 showed significantly higher Cmax (53.18 ± 4.56 ng/mL), and relative bioavailability (≈2.29-fold).

Electrospun Nanofibrous Scaffolds: Review of Current Progress in the Properties and Manufacturing Process, and Possible Applications for COVID-19

Over the last twenty years, researchers have focused on the potential applications of electrospinning, especially its scalability and versatility. Specifically, electrospun nanofiber scaffolds are considered an emergent technology and a promising approach that can be applied to biosensing, drug delivery, soft and hard tissue repair and regeneration, and wound healing. Several parameters control the functional scaffolds, such as fiber geometrical characteristics and alignment, architecture, etc. As it is based on nanotechnology, the concept of this approach has shown a strong evolution in terms of the forms of the materials used (aerogels, microspheres, etc.), the incorporated microorganisms used to treat diseases (cells, proteins, nuclei acids, etc.), and the manufacturing process in relation to the control of adhesion, proliferation, and differentiation of the mimetic nanofibers. However, several difficulties are still considered as huge challenges for scientists to overcome in relation to scaffolds design and properties (hydrophilicity, biodegradability, and biocompatibility) but also in relation to transferring biological nanofibers products into practical industrial use by way of a highly efficient bio-solution. In this article, the authors review current progress in the materials and processes used by the electrospinning technique to develop novel fibrous scaffolds with suitable design and that more closely mimic structure. A specific interest will be given to the use of this approach as an emergent technology for the treatment of bacteria and viruses such as COVID-19.

Electrospun nanofibers for the delivery of active drugs through nasal, oral and vaginal mucosa: Current status and future perspectives

Transmucosal surfaces bypass many limitations associated with conventional drug delivery (oral and parenteral routes), such as poor absorption rate, enzymatic activity, acidic environment and first-pass metabolism occurring inside the liver. However, these surfaces have several disadvantages such as poor retention time, narrow absorption window and continuous washout of the drug by the surrounding fluids. Electrospun nanofibers with their unique surface properties and encapsulation efficiency may act as novel drug carriers to overcome the challenges associated with conventional drug delivery routes, so as to achieve desired therapeutic responses. This review article provides detailed information regarding the challenges faced in the mucosal delivery of drugs, and the use of nanofiber systems as an alternative to deliver drugs to the systemic circulation, as well as local drug administration. The physiological and anatomical features of different types of mucosal surfaces and current challenges are systematically discussed. We also address future considerations in the area of transmucosal delivery of some important drugs.

Electrospinning Nanofibers for Therapeutics Delivery

The limitations of conventional therapeutic drugs necessitate the importance of developing novel therapeutics to treat diverse diseases. Conventional drugs have poor blood circulation time and are not stable or compatible with the biological system. Nanomaterials, with their exceptional structural properties, have gained significance as promising materials for the development of novel therapeutics. Nanofibers with unique physiochemical and biological properties have gained significant attention in the field of health care and biomedical research. The choice of a wide variety of materials for nanofiber fabrication, along with the release of therapeutic payload in sustained and controlled release patterns, make nanofibers an ideal material for drug delivery research. Electrospinning is the conventional method for fabricating nanofibers with different morphologies and is often used for the mass production of nanofibers. This review highlights the recent advancements in the use of nanofibers for the delivery of therapeutic drugs, nucleic acids and growth factors. A detailed mechanism for fabricating different types of nanofiber produced from electrospinning, and factors influencing nanofiber generation, are discussed. The insights from this review can provide a thorough understanding of the precise selection of materials used for fabricating nanofibers for specific therapeutic applications and also the importance of nanofibers for drug delivery applications.

Formulation, Characterization and In vitro Cytotoxicity of 5-Fluorouracil Loaded Polymeric Electrospun Nanofibers for the Treatment of Skin Cancer

BACKGROUND

The purpose of this study was to formulate, characterize and conduct in vitro cytotoxicity of 5-fluorouracil loaded polymeric electrospun nanofibers for the treatment of skin cancer. The patents on electrospun nanofibers (US9393216B2), (US14146252), (WO2015003155A1) etc. helped in the selection of polymers and method for the preparation of nanofibers.

METHODS

In the present study, the fabrication of nanofibers was done using a blend of chitosan with polyvinyl alcohol and processed using the electrospinning technique. 5-fluorouracil with known chemotherapeutic potential in the treatment of skin cancer was used as a drug carrier. 24-1 fractional factorial screening design was employed to study the effect of independent variables like the concentration of the polymeric solution, applied voltage (kV), distance (cm), flow rate (ml / hr) on dependent variables like % entrapment efficiency and fiber diameter.

RESULTS

Scanning electron microscopy was used to characterize fiber diameter and morphology. Results showed that the fiber diameter of all batches was found in the range of 100-200 nm. The optimized batch results showed the fiber diameter of 162.7 nm with uniform fibers. The tensile strength obtained was 190±37 Mpa. Further in vitro and ex vivo drug release profile suggested a controlled release mechanism for an extended period of 24 hr. The 5-fluorouracil loaded electrospun nanofibers were found to decrease cell viability up to ≥50% over 24 hr, with the number of cells dropping by ~ 10% over 48 hr. As the cell viability was affected by the release of 5-fluorouracil, we believe that electrospun nanofibers are a promising drug delivery system for the treatment of Basal Cell Carcinoma (BCC) skin cancer.

CONCLUSION

These results demonstrate the possibility of delivering 5-Fluorouracil loaded electrospun nanofiber to skin with enhanced encapsulation efficiency indicating the effectiveness of the formulation for the treatment of basal cell carcinoma type of skin cancer.

Development and Characterization of Novel Medicated Nanofiber for the Treatment of Periodontitis

Periodontitis is a common microbial infection that involves pocket formation due to the destruction of periodontal ligament. The present work is oriented to provide a holistic approach for the treatment of periodontitis comprising localized delivery of nanometric hydroxyapatite as a reinforcing filler and silver-metronidazole as periodontal pocket disinfectant adjunct to current periodontal therapy because of its broad-spectrum antimicrobial activity and low systemic toxicity. In the present work, electrospinning technique was used to prepare medicated nanofiber enriched with antibacterial-hydroxyapatite layers for dental application. The optimized formulation was characterized by SEM, FTIR, DSC, XRD, etc. Safety assessment and therapeutic potential of optimized formulation was evaluated in both in vitro and in vivo animal models. The newly synthesized complex (silver-metronidazole) exhibited higher antibacterial activity against the selected strain over the referenced silver and metronidazole. Results of in vitro studies suggested good compatibility of the metal complex with the polymer matrix. The drug release behavior from optimized formulation shows constant in vitro release behavior. Both in vitro and in vivo studies show broad-spectrum antimicrobial activity of the metal complex and demonstrate the potential of biomimetic nano-hydroxyapatite for filling periodontal defects. All these observations indicated that the above formulation could play a useful role in the treatment of periodontitis. Graphical Abstract ᅟ.

A Summary of Electrospun Nanofibers as Drug Delivery System: Drugs Loaded and Biopolymers Used as Matrices

Recently, electrospun polymeric nanofibers have proven to be an interesting strategy for drug delivery systems application. The high surface-to-volume ratio of the fibers can improve some processes, such as cell binding and proliferation, drug loading, and mass transfer processes. One of the most important and studied areas of electrospinning is in the drug delivery field, for the controlled release of active substances ranging from antibiotics and anticancer agents to macromolecules such as proteins and DNA. The advantage of this method is that a wide variety of low solubility drugs can be loaded into the fibers to improve their bioavailability or to attain controlled release. This review presents an overview of the reported drugs loaded into polymeric nanofibers, to be used as drug delivery systems. For instance, it presents the reports on drugs with different bioactivities such as antiinflammatory, anti-microbial, anticancer, cardiovascular, anti-histamine, gastrointestinal, palliative and contraceptive drugs, etc. It also analyzes the electrospinning techniques used in each system, as well as the polymers used as matrices for the preparation of the nanofibers; unfolding the advantages of electrospun polymeric nanofibers over other drug delivery systems. This review intends to enlist and summarize the reported literature concerning this topic. In addition, it proposes future research in the field.

Development, optimization, and characterization of polymeric electrospun nanofiber: a new attempt in sublingual delivery of nicorandil for the management of angina pectoris

The objective of the current investigation was to develop a novel biocomposite polymeric nanofiber for sublingual delivery of nicorandil in an attempt to reduce mucosal ulceration and to improve drug bioavailability. Polymeric nanofibers were achieved using vitamin B12 and a blend of hyaluronic acid and polyvinyl alcohol as polymeric constituents. The electrospinning method was used to prepare drug (nicorandil)-loaded nanofibers. The resulting nanofibers were characterized for morphology, drug loading, XRD, DSC, in vitro drug release, degree of swelling, and pharmacokinetic behavior. The prepared nanofibers were found to be uniform, non-beaded, and non-woven, with fiber diameter ranging from 200-450 nm. In vitro drug release substantiated the controlled release behavior of the developed formulation. Histopathology studies demonstrated no evidence of mucosal ulceration at the site of application. Pharmacokinetic studies established the preclinical safety and showed the maintenance of an effective therapeutic level for a prolonged period. The present investigation gives inputs showing that the biocomposite nanofiber assists as a perfect carrier system for sublingual delivery of anti-anginal drugs.

Diacerein-Loaded novel gastroretentive nanofiber system using PLLA: Development and in vitro characterization

The purpose of this research is to describe the utility of nanofibers as a gastroretentive dosage form and improve the solubility of diacerein (DIA) by using the above approach. Poly L-(lactic acid) (PLLA) nanofibers loaded with DIA were prepared using the electrospinning technique. The nanofibers developed were characterized for morphology, tensile strength, floating behavior, drug entrapment, drug solubility, mucoadhesive detachment force, and drug release profile. The results demonstrated that the drug-loaded nanofibers were smooth, discrete, & non-woven. Analysis by X-ray crystallography (XRD) revealed that the drug in the nanofiber was present in the amorphous state, which largely contributes to higher drug solubility in the nanofibers developed. The buoyancy study demonstrated that the nanofibers developed exhibited zero lag time. Approximately 61.3% of drug was released in 30 h, thus facilitating the slow release of the drug from the nanofiber system. Finally, we concluded that the electrospun nanofibers developed offer a promising gastroretentive drug delivery system to deliver DIA with improved solubility.

In situ nasal gel drug delivery: A novel approach for brain targeting through the mucosal membrane

Recently, sustained and controlled drug delivery has become the demand, and research has been undertaken in achieving much better drug product effectiveness, reliability and safety. The in situ polymeric system has gained much attention, to develop a controlled release system. It has been used as a vehicle for local and systemic drug delivery. Nowadays, it has created much interest, because of its characteristics of high vascularization, high permeability, rapid onset of action, low enzymatic degradation, and avoidance of hepatic first pass metabolism. The main aim of this review is to provide knowledge of different mechanisms of nasal absorption and approaches for nasal drug delivery.

Inhalable chitosan nanoparticles as antitubercular drug carriers for an effective treatment of tuberculosis

The aim of this study was to prepare and characterize spray dried inhalable chitosan nanoparticles (CNPs) for sustained delivery of anti-tubercular drugs, isoniazid (INH) and rifampicin (RIF), to the lungs. CNPs were prepared by ionic gelation technique followed spray drying. Results showed that the CNPs obtained had a smooth spherical shape with an average size of 230 ± 4.5 nm, with a poly dispersity index of 0.180 ± 0.021. Both drugs, were detected in various organs (lungs, liver, spleen and kidney) until 24 h post nebulization. The chemotherapeutic efficacy of a single dose of drug-loaded CNPs suggested that they are more effective against the mycobacterium than free drugs.

Biomaterials-based nanofiber scaffold: targeted and controlled carrier for cell and drug delivery

Nanofiber scaffold formulations (diameter less than 1000 nm) were successfully used to deliver the drug/cell/gene into the body organs through different routes for an effective treatment of various diseases. Various fabrication methods like drawing, template synthesis, fiber-mesh, phase separation, fiber-bonding, self-assembly, melt-blown, and electrospinning are successfully used for fabrication of nanofibers. These formulations are widely used in various fields such as tissue engineering, drug delivery, cosmetics, as filter media, protective clothing, wound dressing, homeostatic, sensor devices, etc. The present review gives a detailed account on the need of the nanofiber scaffold formulation development along with the biomaterials and techniques implemented for fabrication of the same against innumerable diseases. At present, there is a huge extent of research being performed worldwide on all aspects of biomolecules delivery. The unique characteristics of nanofibers such as higher loading efficiency, superior mechanical performance (stiffness and tensile strength), controlled release behavior, and excellent stability helps in the delivery of plasmid DNA, large protein drugs, genetic materials, and autologous stem-cell to the target site in the future.