Polystyrene/calcium phosphate nanocomposites: Contact angle studies based on water and methylene iodide

Morphological and Wettability Properties of Thin Coating Films Produced from Technical Lignins

Technical lignins are widely available as side streams from pulping and biorefining processes. The aromatic structure of such lignins could be exploited in coating formulations to provide antioxidant or UV-blocking functionalities to packaging films. In this study, six technical lignins sourced from different plant species by given isolation/modification methods were compared for their composition, molar mass, and functional groups. The lignins were then used to prepare thin spin-coated films from aqueous ammonia media. All the lignins formed ultrathin (<12 nm), smooth (roughness < 2 nm), and continuous films that fully covered the solid support. Most of the films contained nanometer-sized particles, while those from water-insoluble lignins also presented larger particulate features, which likely originated from macromolecular association during solvent evaporation. These latter films had water contact angles (WCAs) between 40 and 60°, corresponding to a surface energy of 42-48 mJ/m² (determined by Zisman plots). For comparison, the water wettability measured on lignin pellets obtained by mechanical compression tracked closely with the WCA obtained from the respective thin films. Considering the widely diverse chemical, molecular, and structural properties of the tested lignins, comprehensively documented here by using a battery of techniques, the solubility in water was found to be the most important and generic parameter to characterize the thin films. This points to the possibility of developing lignin coatings with predictable wetting behavior.

Cellulose Nanocrystal Reinforced Chitosan Based UV Barrier Composite Films for Sustainable Packaging

In this study, green composite films based on cellulose nanocrystal/chitosan (CNC/CS) were fabricated by solution casting. FTIR, XRD, SEM, and TEM characterizations were conducted to determine the structure and morphology of the prepared films. The addition of only 4 wt.% CNC in the CS film improved the tensile strength and Young's modulus by up to 39% and 78%, respectively. Depending on CNC content, the moisture absorption decreased by 34.1-24.2% and the water solubility decreased by 35.7-26.5% for the composite films compared with neat CS film. The water vapor permeation decreased from 3.83 × 10-11 to 2.41 × 10-11 gm-1 s-1Pa-1 in the CS-based films loaded with (0-8 wt.%) CNC. The water and UV barrier properties of the composite films showed better performance than those of neat CS film. Results suggested that CNC/CS nanocomposite films can be used as a sustainable packaging material in the food industry.

Sonochemical synthesis of PVA/PVP blend nanocomposite containing modified CuO nanoparticles with vitamin B1 and their antibacterial activity against Staphylococcus aureus and Escherichia coli

The aim of this paper was to blend the polymers, poly(N-vinyl-2-pyrrolidone) (PVP) and poly(vinyl alcohol) (PVA) to produce a novel composite materials possessing the benefits of both. CuO nanoparticles (NPs) were used as a suitable filler to fabricate the blend nanocomposites (NCs) with desired properties. First, the surface of NPs, was modified with vitamin B₁ (VB₁) as a bio-safe coupling agent. Then, the blend NCs with various ratios of modified CuO (3, 5, and 7 wt%) were fabricated under ultrasonic irradiations followed by casting/solvent evaporation method. These processes are fast and green way to disperse the NPs sufficiently. Several techniques were applied for the characterization of the obtained NCs. morphology examination demonstrated the morphology of NCs and compatibility of NPs with the blend polymer. EDX results indicated the weight and atomic percentage of the achieved materials. TGA analysis verified that the NCs show higher thermal properties than the neat blend polymer. Also embedding the modified NPs into the blend polymer had effected on optical absorbance of the obtained NCs. The contact angle measurements confirmed that the hydrophilicity decreased for different proportions of the modified NPs loaded in the blend polymer. Finally, NCs show better bactericidal effects against gram-positive than gram-negative bacteria.

Preparing copolyester–titanium dioxide nanocomposites with low melting point via in situ hydrolysis, catalysis and esterification process

Copolyester (CP)-titanium dioxide (TiO2) (CPT) nanocomposites with low melting point were synthesized by esterification of terephthalic acid, isophthalic acid, ethylene glycol and 1,4-butanediol monomers in the presence of tetrabutyl orthotitanate (TBOT). TBOT hydrolysis caused the TiO2 nanoparticles to act as catalysts for polymerization. Transmission electron micrographs showed that the TiO2 nanoparticles with the content ranging from 0.2 wt% to 0.4 wt% were well dispersed in the copolyester matrix. The thermal properties of the nanocomposites were assessed by differential scanning calorimetry. The melting point of CPT nanocomposite with 1.2 wt% TiO2 was 201.9°C, significantly lower than that of pure polyethylene terephthalate (above 260°C). Therefore, the obtained CPT nanocomposites with low melting point are potentially better for industrial applications than the commercial product.