Free radical formation from sonolysis of water in the presence of different gases

Unveiled the Structure-Selectivity Relationship for Carbon Dioxide Reduction Triggered by Bi-Doped Cu-Based Nanocatalysts

To investigate synergistic effect between geometric and electronic structures on directing CO2RR selectivity, water phase synthetic protocol and surface architecture engineering strategy are developed to construct monodispersed Bi-doped Cu-based nanocatalysts. The strongly correlated catalytic directionality and Bi3+ dopant can be rationalized by the regulation of [*COOH]/[*CO] adsorption capacities through the appropriate doping of Bi3+ electronic modulator, resulting in volcano relationship between FECO/TOFCO and surface EVBM values. Spectroscopic study reveals that the dual-site binding mode ([Cu─μ─C(═O)O─Bi3+]) enabled by Cu1Bi3+ 2 motif in single-phase Cu150Bi1 nanocatalyst drives CO2-to-CO conversion. In contrast, the study of dynamic Bi speciation and phase transformation in dual-phase Cu50Bi1 nanocatalyst unveils that the Bi0-Bi0 contribution emerges at the expense of BOC phase, suggesting metallic Bi0 phase acting as [H]˙ formation center switches CO2RR selectivity toward CO2-to-HCOO- conversion via [*OCHO] and [*OCHOK] intermediates. This work provides significant insight into how geometric architecture cooperates with electronic effect and catalytic motif/phase to guide the selectivity of electrocatalytic CO2 reduction through the distinct surface-bound intermediates and presents molecular-level understanding of catalytic mechanism for CO/HCOO- formation.

Mechanochemical Degradation of Biopolymers

Mechanochemical treatment of various organic molecules is an emerging technology of green processes in biofuel, fine chemicals, or food production. Many biopolymers are involved in isolating, derivating, or modifying molecules of natural origin. Mechanochemistry provides a powerful tool to achieve these goals, but the unintentional modification of biopolymers by mechanochemical manipulation is not always obvious or even detectable. Although modeling molecular changes caused by mechanical stresses in cavitation and grinding processes is feasible in small model compounds, simulation of extrusion processes primarily relies on phenomenological approaches that allow only tool- and material-specific conclusions. The development of analytical and computational techniques allows for the inline and real-time control of parameters in various mechanochemical processes. Using artificial intelligence to analyze process parameters and product characteristics can significantly improve production optimization. We aim to review the processes and consequences of possible chemical, physicochemical, and structural changes.

Effects of alcohols and dissolved gases on sonochemical generation of hydrogen in a 300 kHz sonoreactor

The sonochemical generation of hydrogen (H2) was investigated using various water/alcohol solutions under argon (Ar) 100 % in a 300 kHz sonoreactor. Five types of alcohols-methanol, ethanol, isopropanol, n-propanol, and n-butanol-were used at various concentrations (0 - 100 % v/v). The H2 generation rate in water was 0.31 μmol/min in the absence of alcohols. The H2 generation rate increased, peaked, and then decreased as the alcohol concentration increased. The concentrations used for the peak H2 generation were 5 %, 1 %, 0.5 %, 0.5 %, and 0.1 % for methanol, ethanol, isopropanol, n-propanol, and n-butanol, respectively. The highest generation rate (5.46 μmol/min) was obtained for methanol 5 % among all conditions in this study, and no H2 was detected for 100 % alcohol concentrations. The reason for the enhancement of the sonochemical H2 generation by the addition of alcohols might be due to strong scavenging effect of alcohols for sonochemically generated oxidizing radicals and vigorous reactions of alcohol molecules and their derivatives with H radicals. No significant correlations were found between the H2 generation rates and physicochemical properties of the alcohols in any of the data in this study. As alcohol concentration increased, the calorimetric power decreased. This indicates that the calorimetric power does not represent the degree of sonochemical reactions in the water/alcohol mixtures. The effect of oxygen (O2) content in the dissolved gases on the generation of H2O2 (representing sonochemical oxidation activity) and H2 (representing sonochemical reduction activity) was investigated using Ar/O2 mixtures for water, methanol 5 % and n-propanol 0.5 %. In water, the highest H2O2 generation was obtained for Ar/O2 (50:50), which is similar to previous research results. However, the H2O2 generation increased as the O2 content increased. In addition, H2 generation decreased as the O2 content increased under all liquid conditions (water, methanol, and n-propanol).

Highly efficient atomic hydrogen-mediated electrochemical hydrodehalogenation of trichloroacetic acid on 3D hierarchical multi-transition metal selenides

Halogenated organic compounds as highly focused emerging contaminants pose a long-lasting threat to human health and the aquatic environment due to their high toxicities and strong anti-biodegradation characteristics. Electrochemical hydrodehalogenation (ECHD) is a promising technology with a low-carbon footprint to remove halogenated organic compounds while suffering from a lack of efficient and robust earth-abundant electrocatalysts. Herein, by integrating two kinds of transition metal dichalcogenides (i.e., MoSe2 nanosheet and Ni3Se2 nanowire) into a conductive 3D porous network nickel foam, we obtained a hierarchical architecture (MoSe2/Ni3Se2@NF) that promises high surface area, fast charge transfer and efficient mass transfer. The interface-confined epitaxial growth of Ni3Se2 nanowires on nickel foam provides abundant sites for the vertical growth of MoSe2 nanosheets, which endows MoSe2 with maximal accessible active edge sites to participate in the ECHD process. Benefiting from such a hierarchical 3D porous configuration, trichloroacetic acid (5 mg/L) was removed over 95% by MoSe2/Ni3Se2@NF at - 1.2 V vs. SCE after 1 h, which dramatically outperformed that for NF (20%) and Ni3Se2@NF (53.2%). The major contributor to such boosted performance is the adsorbed atomic hydrogen (*H) generated during water splitting via suppressing hydrogen-hydrogen dimerization, as evidenced by radical quenching experiments and electron paramagnetic resonance spectroscopy. This study offers appealing opportunities for tailoring the catalytic performance of noble-metal-free heterogeneous catalysts for various applications that require noble-metal catalysts.

Quenching effect of cerium oxide nanoparticles on singlet oxygen: validation of the potential for reaction with multiple reactive oxygen species

Here we studied cerium oxide nanoparticles (nanoceria) as an agent for the future treatment of oxidative damage by validating and evaluating its scavenging activity towards reactive oxygen species (ROS) in vitro. Nanoceria has been shown to mimic the activities of superoxide dismutase and catalase, degrading superoxide (O2•-) and hydrogen peroxide (H2O2). We examined the antioxidative activity of nanoceria, focusing on its ability to quench singlet oxygen (1O2) in an aqueous solution. Electron paramagnetic resonance (EPR) was used to determine the rates of second-order reactions between nanoceria and three ROS (1O2, O2•-, and H2O2) in aqueous solution, and its antioxidative abilities were demonstrated. Nanoceria shows a wide range of ultraviolet-light absorption bands and thus 1O2 was produced directly in a nanoceria suspension using high-frequency ultrasound. The quenching or scavenging abilities of nanoceria for 1O2 and hypoxanthine-xanthine oxidase reaction-derived O2•- were examined by EPR spin-trapping methods, and the consumption of H2O2 was estimated by the EPR oximetry method. Our results indicated that nanoceria interact not only with two previously reported ROS but also with 1O2. Nanoceria were shown to degrade O2•- and H2O2, and their ability to quench 1O2 may be one mechanism by which they protect against oxidative damage such as inflammation.

Piezo/sono-catalytic activity of ZnO micro/nanoparticles for ROS generation as function of ultrasound frequencies and dissolved gases

We report an accurate study on sonocatalytic properties of different ZnO micro and nanoparticles to enhance OH radical production activated by cavitation. In order to investigate some of the still unsolved aspects related to the piezocatalytic effect, the degradation of Methylene Blue and quantification of radicals production have been evaluated as function of different ultrasonic frequencies (20 kHz and 858 kHz) and dissolved gases (Ar, N₂ and air). The results shown that at low frequency the catalytic effect of ZnO particles is well evident and influenced by particle dimension while at high frequency a reduction of the degradation efficiency have been observed using larger particles. An increase of radical production have been observed for all ZnO particles tested while the different saturating gases have poor influence. In both ultrasonic set-up the ZnO nanoparticles resulted the most efficient on MB degradation revealing that the enhanced radical production may arise more from bubbles collapse on particles surface than the discharge mechanism activate by mechanical stress on piezoelectric particles. An interpretation of these effects and a possible mechanism which rules the sonocatalytic activity of ZnO will be proposed and discussed.

Photoinduced loading of electron-rich Cu single atoms by moderate coordination for hydrogen evolution

Single-atom catalysts offer maximal atom utilization efficiencies and high-electronegativity heteroatoms play a crucial role in coordinating reactive single metal atoms to prevent agglomeration. However, these strong coordination bonds withdraw electron density for coordinated metal atoms and consequently affect their catalytic activity. Herein we reveal the high loading (11.3 wt%) and stabilization of moderately coordinated Cu-P₃ structure on black phosphorus support by a photochemical strategy with auxiliary hydrogen. Single-atom Cu sites with an exceptional electron-rich feature show the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\triangle {G}_{{{{{{\rm{H}}}}}}*}$$\end{document}△GH* close to zero to favor catalysis. Neighboring Cu atoms work in synergy to lower the energy of key water adsorption and dissociation intermediates. The reported catalyst shows a low overpotential of only 41 mV at 10 mA cm⁻² and Tafel slope of 53.4 mV dec⁻¹ for the alkaline hydrogen evolution reaction, surpassing both isolated Cu single atoms and Cu nanoclusters. The promising materials design strategy sheds light on the design and fabrication of high-loading single metal atoms and the role of neighboring single atoms for enhanced reaction kinetics.

While atomically dispersed metals can maximize reaction catalytic sites, it is challenging to achieve high atomic densities without agglomeration. Here, authors prepared Cu single-atoms on black phosphorous using a photochemical strategy and auxiliary H₂ as proton reduction electrocatalysts.

Degradation of the nonylphenol aqueous solution by strong ionization discharge: evaluation of degradation mechanism and the water toxicity of zebrafish

Nonylphenol (NP) is a typical environmental endogenous disrupter with low concentration and high toxicity. This paper describes the mechanism of NP degradation in solution by strong ionization dielectric barrier discharge (SIDBD). Furthermore, the degradation performance of NP by SIDBD was tested by changing the equipment voltage, the initial concentration of NP in aqueous solution, pH, and inorganic ions. Degradation pathways of NP were detected using a high-performance liquid chromatography-mass spectrometer. The biological effects of NP degradation were assessed by detecting indicators of embryonic development in zebrafish (survival rate, fetal movement, heartbeat, the body length, behavior, deformity) and adult fish (sex differentiation, weight, ovarian testes pathological section analysis). The results showed when the input O₂ was 5 L/min and the voltage was 3.2 kV, the degradation efficiency of NP can reach 99.0% after 60 min of experiment. Equipment voltage, initial concentration of NP in solution, pH, inorganic ions and other factors can influence the degradation efficiency of NP by DBD. At the higher concentration of NP, the greater influence on embryonic development in zebrafish was noticed. Although the effects of NP on zebrafish sex differentiation were not obvious, it showed significant male weight inhibition and decrease in sperm number.

Microbubbles Stabilized by Protein Shell: From Pioneering Ultrasound Contrast Agents to Advanced Theranostic Systems

Ultrasound is a widely-used imaging modality in clinics as a low-cost, non-invasive, non-radiative procedure allowing therapists faster decision-making. Microbubbles have been used as ultrasound contrast agents for decades, while recent attention has been attracted to consider them as stimuli-responsive drug delivery systems. Pioneering microbubbles were Albunex with a protein shell composed of human serum albumin, which entered clinical practice in 1993. However, current research expanded the set of proteins for a microbubble shell beyond albumin and applications of protein microbubbles beyond ultrasound imaging. Hence, this review summarizes all-known protein microbubbles over decades with a critical evaluation of formulations and applications to optimize the safety (low toxicity and high biocompatibility) as well as imaging efficiency. We provide a comprehensive overview of (1) proteins involved in microbubble formulation, (2) peculiarities of preparation of protein stabilized microbubbles with consideration of large-scale production, (3) key chemical factors of stabilization and functionalization of protein-shelled microbubbles, and (4) biomedical applications beyond ultrasound imaging (multimodal imaging, drug/gene delivery with attention to anticancer treatment, antibacterial activity, biosensing). Presented critical evaluation of the current state-of-the-art for protein microbubbles should focus the field on relevant strategies in microbubble formulation and application for short-term clinical translation. Thus, a protein bubble-based platform is very perspective for theranostic application in clinics.

Efficient Electrochemical Nitrate Reduction to Ammonia with Copper-Supported Rhodium Cluster and Single-Atom Catalysts

The electrochemical nitrate reduction reaction (NITRR) provides a promising solution for restoring the imbalance in the global nitrogen cycle while enabling a sustainable and decentralized route to source ammonia. Here, we demonstrate a novel electrocatalyst for NITRR consisting of Rh clusters and single-atoms dispersed onto Cu nanowires (NWs), which delivers a partial current density of 162 mA cm^-2 for NH₃ production and a Faradaic efficiency (FE) of 93 % at -0.2 V vs. RHE. The highest ammonia yield rate reached a record value of 1.27 mmol h^-1  cm^-2 . Detailed investigations by electron paramagnetic resonance, in situ infrared spectroscopy, differential electrochemical mass spectrometry and density functional theory modeling suggest that the high activity originates from the synergistic catalytic cooperation between Rh and Cu sites, whereby adsorbed hydrogen on Rh site transfers to vicinal *NO intermediate species adsorbed on Cu promoting the hydrogenation and ammonia formation.

Intermolecular binding between bulk water and dissolved gases in earth’s magnetic field

Elucidation of the static states and dynamic behavior of oxygen and nitrogen dissolved in water is one of the most important issues in the life sciences. In the present study, experimental trials and theoretical calculations were performed based on the hypothesis that the dissolution of gas molecules in water is related to excitation by the Earth’s magnetic field. Using quantum theories such as those used to describe electro magnetic resonance and nuclear magnetic resonance, this study investigated the states of oxygen, nitrogen and hydrogen dissolved in water. The results indicate that the Earth’s magnetic field is involved in the bonding and dissociation of molecules at the gas-liquid interface. These calculations assessed the effect of a field strength of 1.0 x 10⁻⁴ T and reproduced the influences of temperature changes on dissolved gas concentrations. Molecular interactions caused by electromagnetic properties and the external geomagnetic field were found to affect intermolar bonding associated with water cluster structures. It is concluded that the binding between molecules typically attributed to Coulomb coupling by magnetic charge and van der Waals forces results from excitation in the Earth’s magnetic field.

Per- and poly-fluoroalkyl substance remediation from soil and sorbents: A review of adsorption behaviour and ultrasonic treatment

Per- and poly-fluoroalkyl substances (PFAS) are xenobiotics, present at variable concentrations in soils and groundwater worldwide. Some of the current remediation techniques being researched or applied for PFAS-impacted soils involve solidification-stabilisation, soil washing, excavation and disposal to landfill, on site or in situ smouldering, thermal desorption, ball milling and incineration. Given the large volumes of soil requiring treatment, there is a need for a more environmentally friendly technique to remove and treat PFASs from soils. Sorbents such as granular/powdered activated carbon, ion exchange resins and silicas are used in water treatment to remove PFAS. In this work, PFAS adsorption mechanisms and the effect of pore size, pH and organic matter on adsorption efficacy are discussed. Then, adsorption of PFAS to soils and sorbents is considered when assessing the viability of remediation techniques. Sonication-aided treatment was predicted to be an effective removal technique for PFAS from a solid phase, and the effect of varying frequency, power and particle size on the effectiveness of the desorption process is discussed. Causes and mitigation strategies for possible cavitation-induced particle erosion during ultrasound washing are also identified. Following soil remediation, degrading the extracted PFAS using sonolysis in a water-organic solvent mixture is discussed. The implications for future soil remediation and sorbent regeneration based on the findings in this study are given.

The impact of ultrasonic parameters on the exfoliation of NiFe LDH nanosheets as electrocatalysts for the oxygen evolution reaction in alkaline media

The ultrasonic process has been examined to exfoliate layered materials and upgrade their properties for a variety of applications in different media. Our previous studies have shown that the ultra-sonication treatment in water without chemicals has a positive influence on the physical and electrochemical performance of layered materials and nanoparticles. In this work, we have probed the impact of ultrasonication on the physical properties and the oxygen evolution reaction (OER) of the NiFe LDH materials under various conditions, including suspension concentration (2.5-12.5 mg mL-1), sonication times (3-20 min) and amplitudes (50-90%) in water, in particular, sonication times and amplitudes. We found that the concentration, amplitude and time play significant roles on the exfoliation of the NiFe LDH material. Firstly, the NiFe LDH nanosheets displayed the best OER performance under ultrasonic conditions with the concentration of 10 mg mL-1 (50% amplitude and 15 min). Secondly, it was revealed that the exfoliation of the NiFe LDH nanosheets in a short time (<10 min) or a higher amplitudes (≥80%) has left a cutdown on the OER activity. Comprehensively, the optimum OER activity was displayed on the exfoliated NiFe LDH materials under ultrasonic condition of 60% (amplitude), 10 mg mL-1 and 15 min. It demanded only 250 mV overpotentials to reach 10 mA cm-2 in 1 M KOH, which was 100 mV less than the starting NiFe LDH material. It was revealed from the mechanism of sonochemistry and the OER reaction that, after exfoliation, the promoted OER performance is ascribed to the enriched Fe3+ at the active sites, easier oxidation of Ni2+ to Ni3+, and the strong electrical coupling of the Ni2+ and Fe3+ during the OER process. This work provides a green strategy to improve the intrinsic activity of layered materials.

How do dissolved gases affect the sonochemical process of hydrogen production? An overview of thermodynamic and mechanistic effects - On the "hot spot theory"

Although most of researchers agree on the elementary reactions behind the sonolytic formation of molecular hydrogen (H₂) from water, namely the radical attack of H₂O and H₂O₂ and the free radicals recombination, several recent papers ignore the intervention of the dissolved gas molecules in the kinetic pathways of free radicals, and hence may wrongly assess the effect of dissolved gases on the sonochemical production of hydrogen. One may fairly ask to which extent is it acceptable to ignore the role of the dissolved gas and its eventual decomposition inside the acoustic cavitation bubble? The present opinion paper discusses numerically the ways in which the nature of dissolved gas, i.e., N₂, O₂, Ar and air, may influence the kinetics of sonochemical hydrogen formation. The model evaluates the extent of direct physical effects, i.e., dynamics of bubble oscillation and collapse events if any, against indirect chemical effects, i.e., the chemical reactions of free radicals formation and consequently hydrogen emergence, it demonstrates the improvement in the sonochemical hydrogen production under argon and sheds light on several misinterpretations reported in earlier works, due to wrong assumptions mainly related to initial conditions. The paper also highlights the role of dissolved gases in the nature of created cavitation and hence the eventual bubble population phenomena that may prevent the achievement of the sonochemical activity. This is particularly demonstrated experimentally using a 20 kHz Sinaptec transducer and a Photron SA 5 high speed camera, in the case of CO₂-saturated water where degassing bubbles are formed instead of transient cavitation.

A critical review on geosmin and 2-methylisoborneol in water: sources, effects, detection, and removal techniques

The exposure to geosmin (GSM) and 2-methylisoborneol (2-MIB) in water has caused a negative impact on product reputation and customer distrust. The occurrence of these compounds and their metabolites during drinking water treatment processes has caused different health challenges. Conventional treatment techniques such as coagulation, sedimentation, filtration, and chlorination employed in removing these two commonest taste and odor compounds (GSM and 2-MIB) were found to be ineffective and inherent shortcomings. The removal of GSM and MIB were found to be effective using combination of activated carbon and ozonation; however, high treatment cost associated with ozonation technique and poor regeneration efficiency of activated carbon constitute serious setback to the combined system. Other shortcoming of the activated carbon adsorption and ozonation include low adsorption efficiency due to the presence of natural organic matter and humic acid. In light of this background, the review is focused on the sources, effects, environmental pathways, detection, and removal techniques of 2-MIB and GSM from aqueous media. Although advanced oxidation processes (AOPs) were found to be promising to remove the two compounds from water but accompanied with different challenges. Herein, to fill the knowledge gap analysis on these algal metabolites (GSM and 2-MIB), the integration of treatment processes vis-a-viz combination of one or more AOPs with other conventional methods are considered logical to remove these odorous compounds and hence could improve overall water quality.

A Review on Additives-assisted Ultrasound for Organic Pollutants Degradation

In the past 2 decades, considerable attentions have been paid to the sonochemical advanced oxidation processes (SAOPs) in the fields of pollutants removal. SAOPs are powerful methods for refractory pollutants degradation due to the free radicals (e.g., •OH and •H) generated by water pyrolysis and extremely high temperature and pressure in and around cavitation bubbles. Reports on various additives for the improvement of sonochemical pollutants degradation including oxidants, inorganic anions, etc. have been made. This paper presents a comprehensive review on the ultrasound (US) alone and sono-hybrid systems for various pollutants degradation. In this paper, the degradation efficiency of various pollutants in sono-hybrid systems are elucidated in detail, and particular emphasis is placed on the reaction mechanism of additives in US for the enhancement of pollutants degradation. The problems on the applications of the current sono-hybrid systems are identified and discussed, and the outlooks for further in-depth studies on the challenges and some research needs for the applications of SAOPs for the removal of organic pollutants from aquatic systems are made at the end.

Hydrochar and pyrochar for sorption of pollutants in wastewater and exhaust gas: A critical review

Pollutants in wastewater and exhaust gas bring out serious concerns to public health and the environment. Biochar can be developed as a sustainable adsorbent originating from abundant bio-wastes, such as agricultural waste, forestry residue, food waste and human waste. Here we highlight the state-of-the-art research progress on pyrochar and hydrochar for the sorption of pollutants (heavy metal, organics, gas, etc) in wastewater and exhaust gases. The adsorption performance of pyrochar and hydrochar are compared and discussed in-depth, including preparation procedures (carbonization and activation), sorption possible mechanisms, and physiochemical properties. Challenges and perspective for designing efficient and environmental benign biochar-based adsorbents are finally addressed.

Acoustic frequency and optimum sonochemical production at single and multi-bubble scales: A modeling answer to the scaling dilemma

The present work consists of an innovative approach aiming to address the scalability dilemma of the sonochemical activity dependency of acoustic frequency. The study originates from the discordance of observations between the theoretical investigations of the sonochemical activity of the single acoustic cavitation bubble in function of the acoustic frequency, in one hand, and the experimental findings regarding the optimal frequency condition, mainly in terms of pollutant degradation, in the other hand. A single bubble and an up-scaled model of the sonochemical activity are suggested and simulations were conducted based on both of them over the frequencies 20, 200, 300, 360, 443, 500, 600 and 800 kHz under an oxygen atmosphere. The results reveal that the sonochemical production at single bubble scale is monotonously decreasing with the increase of frequency, while all the products demonstrate an absolute optimum of sonochemical production at 200 kHz, except HO^• that attains its maximum molar yield under 300 kHz. Besides, the production of the predominant species, namely HO₂^•, HO^• and O₃, manifests a clear rebound at 500 kHz. All the present results were compared to and confirmed by experimental findings, while the scalability of the concentrations of sonochemically produced species was discussed using a parameter we introduced as "the mass focusing factor".

Selective radical depolymerization of cellulose to glucose induced by high frequency ultrasound

The depolymerization of cellulose to glucose is a challenging reaction and often constitutes a scientific obstacle in the synthesis of downstream bio-based products. Here, we show that cellulose can be selectively depolymerized to glucose by ultrasonic irradiation in water at a high frequency (525 kHz). The concept of this work is based on the generation of H˙ and ˙OH radicals, formed by homolytic dissociation of water inside the cavitation bubbles, which induce the cleavage of the glycosidic bonds. The transfer of radicals on the cellulose particle surfaces prevents the side degradation of released glucose into the bulk solution, allowing maintaining the selectivity to glucose close to 100%. This work is distinguished from previous technologies in that (i) no catalyst is needed, (ii) no external source of heating is required, and (iii) the complete depolymerization of cellulose is achieved in a selective fashion. The addition of specific radical scavengers coupled to different gaseous atmospheres and ˙OH radical dosimetry experiments suggested that H˙ radicals are more likely to be responsible for the depolymerisation of cellulose.

Recent developments in the sonoelectrochemical synthesis of nanomaterials

In recent years, the synthesis and use of nanoparticles have been of special interest among the scientific communities due to their unique properties and applications in various advanced technologies. The production of these materials at industrial scale can be difficult to achieve due to high cost, intense labour and use of hazardous solvents that are often required by traditional chemical synthetic methods. Sonoelectrochemistry is a hybrid technique that combines ultrasound and electrochemistry in a specially designed electrochemical setup. This technique can be used to produce nanomaterials with controlled sizes and shapes. The production of nanoparticles by sonoelectrochemistry as a technique offers many advantages: (i) a great enhancement in mass transport near the electrode, thereby altering the rate, and sometimes the mechanism of the electrochemical reactions, (ii) a modification of surface morphology through cavitation jets at the electrode-electrolyte interface, usually causing an increase of the surface area and (iii) a thinning of the electrode diffusion layer thickness and therefore ion depletion. The scalability of sonoelectrochemistry for producing nanomaterials at industrial scale is also very plausible due to its "one-pot" synthetic approach. Recent advancements in sonoelectrochemistry for producing various types of nanomaterials are briefly reviewed in this article. It is with hope that the presentation of these studies therein can generate more interest in the field to "catalyze" future investigations in novel nanomaterial development and industrial scale-up studies.

Sonolytic degradation of bisphenol S: Effect of dissolved oxygen and peroxydisulfate, oxidation products and acute toxicity

In this paper, the kinetics of bisphenol S (BPS) degradation in the presence of peroxydisulfate (PDS) or dissolved oxygen (DO) in ultrasound (US) system were investigated. For PDS (US/PDS), increased PDS concentration result in faster BPS degradation, but the enhancement was not remarkable with multiplying PDS dosages. Therefore, heterogeneous PDS activation model based on a Langmuir-type adsorption mechanism was proposed to explain the trait of BPS abatement. The equilibrium constant of PDS (K_PDS) was calculated to be 2.91 × 10^-4/μM, which was much lower than that of BPS, suggesting that PDS was hard to adsorb on the gas-liquid interface of the cavitation bubble following by activation. Besides, the formation of •OH and SO₄^•- in US/PDS system was reinvestigated. The result showed that SO₄^•- rather than •OH was the predominant radical, which was quite different from previous study. Dissolved oxygen largely improve the degradation of BPS in US system and •OH rather than O₂^•- was proved to be the main reactive oxygen species (ROS). The improvement of •OH generation possibly caused by the reaction of DO with •H so that it cannot recombine with •OH. The transformation of the BPS in US system mainly included BPS radical polymerization, hydroxylation and hydrolysis. Frustratingly, the acute toxicity assay of Vibrio fischeri suggests that the degradation products of BPS are more toxic. These results will improve the understanding on the activation mechanisms of PDS and the role of dissolved oxygen play in US. Further investigations may need to explore other treatment ways of BPS and evaluate the acute toxicity of degradation products.

Sonochemical synthesis of Pr6MoO12 nanostructures as an effective photocatalyst for waste-water treatment

Synthesis of pure Pr₆MoO₁₂ nanoparticles was the aim of the present work, which was prepared by sonochemical method which is a controllable rout on size, purity, and morphology of products. The experiments were carried out under a probe as sonication source, and its power was adjusted in 30 W (9 kHz), 50 W (15 kHz), and 80 W (24 kHz) for different samples. The optimum product with the smallest size and highest purity was synthesized by changing time, power of sonication, solvent and capping agent. Besides, the formation of various phases of praseodymium molybdate was investigated in different experimental conditions that proved the presence of ammonia, sonication and calcination are necessary factors for the preparation of pure Pr₆MoO₁₂ nanoparticles. Products were characterized by various analyses such as SEM, XRD, TEM, FT-IR, DRS, and EDS. Furthermore, the photocatalytic activity of Pr₆MoO₁₂ nanoparticles under UV irradiation was studied by photodegradation of methylene blue and acid red 92 as organic pollutants. The most active photocatalytic agent was determined superoxide anion radicals and kinetics model of photocatalytic reaction was considered as pseudo-first order.

A comprehensive review on physical activation of biochar for energy and environmental applications

Biochar is a solid by-product of thermochemical conversion of biomass to bio-oil and syngas. It has a carbonaceous skeleton, a small amount of heteroatom functional groups, mineral matter, and water. Biochar’s unique physicochemical structures lead to many valuable properties of important technological applications, including its sorption capacity. Indeed, biochar’s wide range of applications include carbon sequestration, reduction in greenhouse gas emissions, waste management, renewable energy generation, soil amendment, and environmental remediation. Aside from these applications, new scientific insights and technological concepts have continued to emerge in the last decade. Consequently, a systematic update of current knowledge regarding the complex nature of biochar, the scientific and technological impacts, and operational costs of different activation strategies are highly desirable for transforming biochar applications into industrial scales. This communication presents a comprehensive review of physical activation/modification strategies and their effects on the physicochemical properties of biochar and its applications in environment-related fields. Physical activation applied to the activation of biochar is discussed under three different categories: I) gaseous modification by steam, carbon dioxide, air, or ozone; II) thermal modification by conventional heating and microwave irradiation; and III) recently developed modification methods using ultrasound waves, plasma, and electrochemical methods. The activation results are discussed in terms of different physicochemical properties of biochar, such as surface area; micropore, mesopore, and total pore volume; surface functionality; burn-off; ash content; organic compound content; polarity; and aromaticity index. Due to the rapid increase in the application of biochar as adsorbents, the synergistic and antagonistic effects of activation processes on the desired application are also covered.

Sonochemical hydrogenation of metallic microparticles

We report the sonochemical synthesis of hydrogenated metallic microparticles through room-temperature ultrasonic irradiation of aqueous metallic slurries. The role of saturating gases and of reduction-oxidation mechanism on promoting the hydride formation is investigated. The method is then applied to study the synthesis of different metallic hydrides (Mn, Ti) and the hydrogenation of La(Fe,Mn,Si)₁₃, an intermetallic compound with magnetocaloric properties used in magnetic refrigeration applications. The samples were characterized by X-ray diffraction to identify the presence of hydrogenated phases, by differential scanning calorimetry to evaluate hydrogen release and temperature stability of the hydrides and by electron microscopy to identify morphological modifications induced by acoustic cavitation. The hydrogenation of metallic microparticles and intermetallic compounds is reported for the first time by means of this experimental technique which could represent a new tool for fast and cheap hydrogenation of materials for different technological applications, such as hydrogen storage and magnetic refrigeration.

Long-lived and short-lived reactive species produced by a cold atmospheric pressure plasma jet for the inactivation of Pseudomonas aeruginosa and Staphylococcus aureus

Different chemical pathways leading to the inactivation of Pseudomonas aeruginosa and Staphylococcus aureus by a cold atmospheric pressure plasma jet (APPJ) in buffered and non-buffered solutions are reported. As APPJs produce a complex mixture of reactive species in solution, a comprehensive set of diagnostics were used to assess the liquid phase chemistry. This includes absorption and electron paramagnetic resonance spectroscopy in addition to a scavenger study to assess the relative importance of the various plasma produced species involved in the inactivation of bacteria. Different modes of inactivation of bacteria were found for the same plasma source depending on the solution and the plasma feed gas. The inactivation of bacteria in saline is due to the production of short-lived species in the case of argon plasma when the plasma touches the liquid. Long-lived species (ClO^-) formed by the abundant amount of O^. radicals produced by the plasmas played a dominant role in the case of Ar + 1% O₂ and Ar + 1% air plasmas when the plasma is not in direct contact with the liquid. Inactivation of bacteria in distilled water was found to be due to the generation of short-lived species: O^. &O₂^.- for Ar + 1% O₂ plasma and O₂^.- (and ^.OH in absence of saline) for Ar plasma.

Insight into ultrasound-mediated reactive oxygen species generation by various metal-porphyrin complexes

Ultrasound is used to trigger the cytotoxicity of chemical compounds, known as sonosensitisers, in an approach called sonodynamic therapy (SDT), which is under investigation herein. The generation of reactive oxygen species (ROS) has been proposed as the main biological occurrence that leads to the cytotoxic effects, which are achieved via the synergistic action of two components: the energy-absorbing sonosensitiser and ultrasound (US), which are both harmless per se. Despite some promising results, a lack of investigation into the mechanisms behind US sonosensitiser-mediated ROS generation has prevented SDT from reaching its full potential. The aim of this work is to investigate the US-responsiveness of a variety of metal-porphyrin complexes, free-base porphyrin and Fe(III), Zn(II) and Pd(II) porphyrin, by analyzing their ROS generation under US exposure and related bio-effects. All experiments were also carried out under light exposure and the results were used as references. Our results show that porphyrin ultrasound-responsiveness depends on the metal ion present, with Zn(II) and Pd(II) porphyrin being the most efficient in generating singlet oxygen and hydroxyl radicals. ROS production efficiency is lower after ultrasound exposure than after light exposure, because of the various physico-chemical mechanisms involved in sensitiser activation. US and porphyrin-mediated ROS generation is oxygen-dependent and the activation of porphyrin by US appears to be more compatible with sonoluminescence-based photo-activation rather than a radical path process that occurs via the homolytic bond rupture of water. Notably, the cytotoxicity results reported herein, which are mirrored by ex-cellulo data, confirm that the type of ROS generation achieved by the US activation of intracellular porphyrins is pivotal to the effectiveness of cancer cell killing.

Scalable exfoliation and dispersion of two-dimensional materials - an update

The preparation of dispersions of single- and few-sheet 2D materials in various solvents, as well as the characterization methods applied to such dispersions, is critically reviewed. Motivating factors for producing single- and few-sheet dispersions of 2D materials in liquids are briefly discussed. Many practical applications are expected for such materials that do not require high purity formulations and tight control of donor and acceptor concentrations, as required in conventional Fab processing of semiconductor chips. Approaches and challenges encountered in exfoliating 2D materials in liquids are reviewed. Ultrasonication, mechanical shearing, and electrochemical processing approaches are discussed, and their respective limitations and promising features are critiqued. Supercritical and more conventional liquid and solvent processing are then discussed in detail. The effects of various types of stabilizers, including surfactants and other amphiphiles, as well as polymers, including homopolymeric electrolytes, nonionic polymers, and nanolatexes, are discussed. Consideration of apparent successes of stabilizer-free dispersions indicates that extensive exfoliation in the absence of dispersing aids results from processing-induced surface modifications that promote stabilization of 2D material/solvent interactions. Also apparent paradoxes in "pristineness" and optical extinctions in dispersions suggest that there is much we do not yet quantitatively understand about the surface chemistry of these materials. Another paradox, emanating from modeling dilute solvent-only exfoliation by sonication using polar components of solubility parameters and surface tension for pristine graphene with no polar structural component, is addressed. This apparent paradox appears to be resolved by realizing that the reactivity of graphene to addition reactions of solvent radicals produced by sonolysis is accompanied by unintended polar surface modifications that promote attractive interactions with solvent. This hypothesis serves to define important theoretical and experimental studies that are needed. We conclude that the greatest promise for high volume and high concentration processing lies in applying methods that have not yet been extensively reported, particularly wet comminution processing using small grinding media of various types.

Hydration or hydroxylation: direct synthesis of fullerenol from pristine fullerene [C60] via acoustic cavitation in the presence of hydrogen peroxide

A green low energy approach avoiding the use of toxic or corrosive reagents/solvents is proposed for the synthesis of potential fullerenol moieties [C₆₀(OH)_n·mH₂O], in which C₆₀ in dil. H₂O₂ (30%) aqueous media was ultrasonicated (20 kHz, 200 W) at 30% amplitude for 1 h.

Superoxide Ion: Generation and Chemical Implications

Superoxide ion (O2(•-)) is of great significance as a radical species implicated in diverse chemical and biological systems. However, the chemistry knowledge of O2(•-) is rather scarce. In addition, numerous studies on O2(•-) were conducted within the latter half of the 20th century. Therefore, the current advancement in technology and instrumentation will certainly provide better insights into mechanisms and products of O2(•-) reactions and thus will result in new findings. This review emphasizes the state-of-the-art research on O2(•-) so as to enable researchers to venture into future research. It comprises the main characteristics of O2(•-) followed by generation methods. The reaction types of O2(•-) are reviewed, and its potential applications including the destruction of hazardous chemicals, synthesis of organic compounds, and many other applications are highlighted. The O2(•-) environmental chemistry is also discussed. The detection methods of O2(•-) are categorized and elaborated. Special attention is given to the feasibility of using ionic liquids as media for O2(•-), addressing the latest progress of generation and applications. The effect of electrodes on the O2(•-) electrochemical generation is reviewed. Finally, some remarks and future perspectives are concluded.

A universal magnetic ferrofluid: Nanomagnetite stable hydrosol with no added dispersants and at neutral pH

A facile method to produce highly stable magnetite magnetic fluid at neutral pH without any stabilizing agents, resulting in pure Fe3O4 nanoparticles dispersed in water is described. The hydrosol which consists of only two components - magnetite and water - behaves as a typical ferrofluid, that is, although it responds to a magnetic field, the magnetic particles cannot be phase-separated from the water by that field. No such pure magnetic fluid have been described before, making it a universal carrier which can be easily modified for any application in materials science and chemistry, and in particular for a range of applications where non-corrosivity, low viscosity, and mild conditions are needed, such as in most bioapplications and in nano electro-mechanical systems. Under optimal conditions the hydrosol is stable for at least three months.

Influence of ionic liquid and ionic salt on protein against the reactive species generated using dielectric barrier discharge plasma

The presence of salts in biological solution can affect the activity of the reactive species (RS) generated by plasma, and so they can also have an influence on the plasma-induced sterilization. In this work, we assess the influence that diethylammonium dihydrogen phosphate (DEAP), an ionic liquid (IL), and sodium chloride (NaCl), an ionic salt (IS), have on the structural changes in hemoglobin (Hb) in the presence of RS generated using dielectric barrier discharge (DBD) plasma in the presence of various gases [O₂, N₂, Ar, He, NO (10%) + N₂ and Air]. We carry out fluorescence spectroscopy to verify the generation of ^•OH with or without the presence of DEAP IL and IS, and we use electron spin resonance (ESR) to check the generation of H^• and ^•OH. In addition, we verified the structural changes in the Hb structure after treatment with DBD in presence and absence of IL and IS. We then assessed the structural stability of the Hb in the presence of IL and IS by using molecular dynamic (MD) simulations. Our results indicate that the IL has a strong effect on the conservation of the Hb structure relative to that of IS against RS generated by plasma.

Bactericidal Effect of Photolysis of H2O2 in Combination with Sonolysis of Water via Hydroxyl Radical Generation

The bactericidal effect of hydroxyl radical (·OH) generated by combination of photolysis of hydrogen peroxide (H₂O₂) and sonolysis of water was examined under the condition in which the yield of ·OH increased additively when H₂O₂ aqueous solution was concomitantly irradiated with laser and ultrasound. The suspension of Staphylococcus aureus mixed with the different concentrations of H₂O₂ was irradiated simultaneously with a laser light (wavelength: 405 nm, irradiance: 46 and 91 mW/cm²) and ultrasound (power: 30 w, frequency: 1.65 MHz) at 20 ± 1°C of the water bulk temperature for 2 min. The combination of laser and ultrasound irradiation significantly reduced the viable bacterial count in comparison with the laser irradiation of H₂O₂ alone. By contrast, the ultrasound irradiation alone exerted almost no bactericidal effect. These results suggested that the combination effect of photolysis of H₂O₂ and sonolysis of water on bactericidal activity was synergistic. A multi-way analysis of variance also revealed that the interaction of H₂O₂ concentration, laser power and ultrasound irradiation significantly affected the bactericidal activity. Since the result of oxidative DNA damage evaluation demonstrated that the combination of laser and ultrasound irradiation significantly induced oxidative damage of bacterial DNA in comparison with the laser irradiation of H₂O₂ alone, it was suggested that the combination effect of photolysis of H₂O₂ and sonolysis of water on bactericidal activity would be exerted via oxidative damage of cellular components such as DNA.

In vitro bactericidal activity of photo-irradiated oxydol products via hydroxyl radical generation

The oxidative power of hydroxyl radicals has been applied to disinfection systems for the purpose of oral hygiene by utilizing blue light-induced photolysis of hydrogen peroxide (H₂O₂) in our laboratory. In the present study, the bactericidal potential of blue light-irradiated oxydol products via hydroxyl radical generation was compared with that of 3% (w/v) H₂O₂. Eleven commercially available oxydol products were used in the present study. Even though a few of the products that contained ethanol, a hydroxyl radical scavenger, as an additive showed slightly lower hydroxyl radical yield as compared with 3% (w/v) H₂O₂, the blue-light irradiation of each oxydol product for 3 min showed similar or superior bactericidal activity against Staphylococcus aureus to that of 3% (w/v) H₂O₂. The results strongly suggest that any of the oxydol products tested in the present study can be used as a source of hydroxyl radicals for the disinfection technique developed in our laboratory.

The reactivity of α-oxoaldehyde with reactive oxygen species in diabetes complications

The reactions of three α-oxoaldehydes (methylglyoxal, glyoxal, and pyruvic acid) with hydroxyl radicals generated by sonolysis of water were investigated using an electron spin resonance (electron paramagnetic resonance) spin-trapping method, and their reaction kinetics were investigated. It is apparent from our experimental results that methylglyoxal exhibits the highest reactivity of the three α-oxoaldehydes. These α-oxoaldehydes can react with hydroxyl radicals faster than other well-known antioxidants can. The reactivity of hydroxyl radicals is higher than that of hydrogen peroxides.

In vitro and in vivo anti-Staphylococcus aureus activities of a new disinfection system utilizing photolysis of hydrogen peroxide

The present study aimed to evaluate in vitro and in vivo antibacterial activity of hydroxyl radical generation system by photolysis of H(2)O(2), which is a new disinfection system for the treatment of oral infection diseases such as periodontitis developed in our laboratory. Firstly, generation of the hydroxyl radical by the photolysis of H(2)O(2) in which 1 mol l(-1) H(2)O(2) was irradiated with a dual wavelength-light emitting diode (LED) at wavelengths of 400 and 465 nm was confirmed by applying an electron spin resonance-spin trapping technique. Secondly, the bactericidal effect of the system was examined under a similar condition in which Staphylococcus aureus suspended in 1 mol l(-1) H(2)O(2) was irradiated with LED light, resulting in substantial reduction of the colony forming unit (CFU) of the bacteria within a short time as 2 min. Finally, in vivo antibacterial effect of the photolysis of H(2)O(2) on a rat model of S. aureus infection was evaluated by a culture study. Since a significant reduction of recovered CFU of S. aureus was obtained, it is expected that in vitro antibacterial effect attributable to hydroxyl radicals generated by photolysis of H(2)O(2) could be well reflected in in vivo superficial bacterial infection.

Literature review of the role of hydroxyl radicals in chemically-induced mutagenicity and carcinogenicity for the risk assessment of a disinfection system utilizing photolysis of hydrogen peroxide

We have developed a new disinfection system for oral hygiene, proving that hydroxyl radicals generated by the photolysis of 1 M hydrogen peroxide could effectively kill oral pathogenic microorganisms. Prior to any clinical testing, the safety of the system especially in terms of the risk of carcinogenicity is examined by reviewing the literature. Previous studies have investigated indirectly the kinds of reactive oxygen species involved in some sort of chemically-induced mutagenicity in vitro by using reactive oxygen species scavengers, suggesting the possible involvement of hydroxyl radicals. Similarly, possible involvement of hydroxyl radicals in some sort of chemically-induced carcinogenicity has been proposed. Notably, it is suggested that the hydroxyl radical can play a role in heavy metal-induced carcinogenicity that requires chronic exposure to the carcinogen. In these cases, hydroxyl radicals produced by Fenton-like reactions may be involved in the carcinogenicity. Meanwhile, potential advantages have been reported on the use of the hydroxyl radical, being included in host immune defense by polymorphonuclear leukocytes, and medical applications such as for cancer treatment and antibiotics. From these, we conclude that there would seem to be little to no risk in using the hydroxyl radical as a disinfectant for short-term treatment of the oral cavity.

Synergistic effect of thermal energy on bactericidal action of photolysis of H₂O₂ in relation to acceleration of hydroxyl radical generation

The purpose of the present study is to evaluate the effect of thermal energy on the yield of and the bactericidal action of hydroxyl radical generated by photolysis of H(2)O(2). Different concentrations of H(2)O(2) (250, 500, 750, and 1,000 mM) were irradiated with light-emitting diodes (LEDs) at a wavelength of 400 ± 20 nm at 25°C to generate hydroxyl radical. The 500 mM H(2)O(2) was irradiated with the LEDs at different temperatures (25, 35, 45, and 55°C). Electron spin resonance spin trapping analysis showed that the yield of hydroxyl radicals increased with the temperature, as well as the concentration of H(2)O(2). Streptococcus mutans and Enterococcus faecalis were used in the bactericidal assay. The LED-light irradiation of the bacterial suspensions in 500 mM H(2)O(2) at 25°C could hardly kill the bacteria within 3 min, while the bactericidal effect was markedly enhanced with the temperature rise. For instance, a temperature increase to 55°C resulted in >99.999% reduction of viable counts of both bacterial species only within 1 min. The photolysis of 500 mM H(2)O(2) at 55°C could reduce the viable counts of bacteria more efficiently than did the photolysis of 1,000 mM H(2)O(2) at 25°C, although the yields of hydroxyl radical were almost the same under the both conditions. These findings suggest that the thermal energy accelerates the generation of hydroxyl radical by photolysis of H(2)O(2), which in turn results in a synergistic bactericidal effect of hydroxyl radical and thermal energy.