Ultrasmall Au and Ag Nanoclusters for Biomedical Applications: A Review

Fluorescence imaging-guided surgery: current status and future directions

Surgery is one of the most important paradigms for tumor therapy, while fluorescence imaging (FI) offers real-time intraoperative guidance, greatly boosting treatment prognosis. The imaging fidelity heavily relies on not only imaging facilities but also probes for imaging-guided surgery (IGS). So far, a great number of IGS probes with emission in visible (400-700 nm) and near-infrared (NIR 700-1700 nm) windows have been developed for pinpointing disease margins intraoperatively. Herein, the state-of-the-art fluorescent probes for IGS are timely updated, with a special focus on the fluorescent probes under clinical examination. For a better demonstration of the superiority of NIR FI over visible FI, both imaging modalities are critically compared regarding signal-to-background ratio, penetration depth, resolution, tissue autofluorescence, photostability, and biocompatibility. Various types of fluorescence IGS have been summarized to demonstrate its importance in the medical field. Furthermore, the most recent progress of fluorescent probes in NIR-I and NIR-II windows is summarized. Finally, an outlook on multimodal imaging, FI beyond NIR-II, efficient tumor targeting, automated IGS, the use of AI and machine learning for designing fluorescent probes, and the fluorescence-guided da Vinci surgical system is given. We hope this review will stimulate interest among researchers in different areas and expedite the translation of fluorescent probes from bench to bedside.

Fluorescent chemosensors facilitate the visualization of plant health and their living environment in sustainable agriculture

Globally, 91% of plant production encounters diverse environmental stresses that adversely affect their growth, leading to severe yield losses of 50-60%. In this case, monitoring the connection between the environment and plant health can balance population demands with environmental protection and resource distribution. Fluorescent chemosensors have shown great progress in monitoring the health and environment of plants due to their high sensitivity and biocompatibility. However, to date, no comprehensive analysis and systematic summary of fluorescent chemosensors used in monitoring the correlation between plant health and their environment have been reported. Thus, herein, we summarize the current fluorescent chemosensors ranging from their design strategies to applications in monitoring plant-environment interaction processes. First, we highlight the types of fluorescent chemosensors with design strategies to resolve the bottlenecks encountered in monitoring the health and living environment of plants. In addition, the applications of fluorescent small-molecule, nano and supramolecular chemosensors in the visualization of the health and living environment of plants are discussed. Finally, the major challenges and perspectives in this field are presented. This work will provide guidance for the design of efficient fluorescent chemosensors to monitor plant health, and then promote sustainable agricultural development.

Possibilities and limitations of solution-state NMR spectroscopy to analyze the ligand shell of ultrasmall metal nanoparticles

Ultrasmall nanoparticles have a diameter between 1 and 3 nm at the border between nanoparticles and large molecules. Usually, their core consists of a metal, and the shell of a capping ligand with sulfur or phosphorus as binding atoms. While the core structure can be probed by electron microscopy, electron and powder diffraction, and single-crystal structure analysis for atom-sharp clusters, it is more difficult to analyze the ligand shell. In contrast to larger nanoparticles, ultrasmall nanoparticles cause only a moderate distortion of the NMR signal, making NMR spectroscopy a qualitative as well as a quantitative probe to assess the nature of the ligand shell. The application of isotope-labelled ligands and of two-dimensional NMR techniques can give deeper insight into ligand-nanoparticle interactions. Applications of one- and two-dimensional NMR spectroscopy to analyze ultrasmall nanoparticles are presented with suitable examples, including a critical discussion of the limitations of NMR spectroscopy on nanoparticles.

The Molecular Footprint of Peptides on the Surface of Ultrasmall Gold Nanoparticles (2 nm) Is Governed by Steric Demand

Ultrasmall gold nanoparticles were functionalized with peptides of two to seven amino acids that contained one cysteine molecule as anchor via a thiol-gold bond and a number of alanine residues as nonbinding amino acid. The cysteine was located either in the center of the molecule or at the end (C-terminus). For comparison, gold nanoparticles were also functionalized with cysteine alone. The particles were characterized by UV spectroscopy, differential centrifugal sedimentation (DCS), high-resolution transmission electron microscopy (HRTEM), and small-angle X-ray scattering (SAXS). This confirmed the uniform metal core (2 nm diameter). The hydrodynamic diameter was probed by 1H-DOSY NMR spectroscopy and showed an increase in thickness of the hydrated peptide layer with increasing peptide size (up to 1.4 nm for heptapeptides; 0.20 nm per amino acid in the peptide). 1H NMR spectroscopy of water-dispersed nanoparticles showed the integrity of the peptides and the effect of the metal core on the peptide. Notably, the NMR signals were very broad near the metal surface and became increasingly narrow in a distance. In particular, the methyl groups of alanine can be used as probe for the resolution of the NMR spectra. The number of peptide ligands on each nanoparticle was determined using quantitative 1H NMR spectroscopy. It decreased with increasing peptide length from about 100 for a dipeptide to about 12 for a heptapeptide, resulting in an increase of the molecular footprint from about 0.1 to 1.1 nm2.

A Silver Nanocluster Assembled by a Superatomic Building Unit

A unique assembly of a two-electron superatom, [Ag10{S2P(OiPr)2}8], as a primary building unit in the construction of a supramolecule [Ag10{S2P(OiPr)2}8]2(μ-4,4'-bpy) through a 4,4'-bipyridine (4,4'-bpy) linker is reported. This approach is facilitated by an open site in the structure that allows for effective pairing. The assembled structure demonstrates a minimal solvatochromic shift across organic solvents with variable polarities, highlighting the influence of self-assembly on the photophysical properties of silver nanoclusters.

Green synthesis of silver and gold nanoparticles in Callistemon viminalis extracts and their antimicrobial activities

In the current study, the bottlebrush [Callistemon viminalis (Sol. ex Gaertn.) G. Don] plant was selected for the green synthesis of silver (Ag) and gold (Au) nanoparticles and to evaluate its antibacterial and antifungal activities. Phytochemical screening of C. viminalis confirmed the presence of alkaloids, anthraquinones, saponins, tannins, betacyanins, phlobatanins, coumarins, terpenoids, steroids, glycosides, and proteins. To characterize the synthesized Ag and Au NPs, UV-Visible spectroscopy, FTIR spectroscopy for functional group identification, field emission scanning electron microscopy (FE-SEM) for particle size, and elemental analysis were performed using EDX. The UV-Visible absorption spectra of the green-synthesized Ag and Au nanoparticles were found to have a maximum absorption band at 420 nm for Ag NPs and 525 nm for Au NPs. FE-SEM analysis of the synthesized NPs revealed a circular shape with a size of 100 nm. Elemental analysis was performed for the synthesis of Ag and Au NPs, which confirmed the purity of the nanoparticles. The greenly synthesized Ag and Au NPs were also evaluated for their anti-bacterial and anti-fungal activities, which exhibited prominent inhibition activities against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa, Candida albicans, C. krusei, Aspergillus sp., and Trichoderma species. The highest zone of inhibition 15.5 ± 0.75 and 15 ± 0.85 mm was observed for Ag NPs against E. coli and P. aeruginosa. Similarly, Trichoderma sp. and Aspergillus sp. were inhibited by Ag NPs up to 13.5 ± 0.95 and 13 ± 0.70 mm. This work will open doors for the development of new antimicrobial agents using green chemistry.

Synthesis of Photoluminescent 2D Self-Assembled Silver Thiolate Nanoclusters for Sensors and Biomolecule Support

Silver thiolate nanoclusters (Ag NCs) show distinctive optical properties resulting from their hybrid nature, metallic and molecular, exhibiting size-, structure-, and surface-dependent photoluminescence, thus enabling the exploitation of Ag NCs for potential applications in nanobiotechnology, catalysis, and biomedicine. However, tailoring Ag NCs for specific applications requires achieving long-term stability and may involve modifying surface chemistry, fine-tuning ligand composition, or adding functional groups. In this study, we report the synthesis of novel Ag NCs using 2-ethanephenylthiolate (SR) as a ligand, highlight critical points addressing stability, and characterize their optical and structural properties. A preliminary electrical characterization revealed high anisotropy, well suited for potential use in electronics/sensing applications. We also present the synthesis and characterization of Ag NCs using 10-carboxylic 2-ol thiolate (SR'COOH) having a terminal carboxylic group for conjugation with amine-containing molecules. We present a preliminary assessment of its bioconjugation capability using bovine serum albumin as a model protein indicating its prospective application as a biomolecule support.

2D silicene nanosheets-loaded coating for combating implant-associated infection

Implant-associated infection (IAI) is an unsolved problem in orthopaedics. Current therapies, including antibiotics and surgical debridement, can lead severe clinical and financial burdens on patients. Therefore, there is an urgent need to reinforce the inherent antibacterial properties of implants. Recently, two-dimensional (2D) silicene nanosheets (SNs) have gained increasing attention in biomedical fields owing to their considerable biocompatibility, biodegradability and strong photothermal-conversion performance. Herein, a dual-functional photosensitive coating on a Ti substrate (denoted as TPSNs) was rationally fabricated for bacterial inhibition and osteogenesis promotion. For the first time, SNs were loaded onto the surface of implants. Hyperthermia generated by the SNs and polydopamine (PDA) coating under 808 nm laser irradiation achieved the in vitro anti-bacterial efficiency of 90.7 ± 2.4 % for S. aureus and 88.0 ± 5.8 % for E. coli, respectively. In addition, TPSNs exhibited promising biocompatibility for the promotion of BMSC (bone marrow mesenchymal stem cells) proliferation and spreading. The presence of silicon (Si) in TPSNs contributed to the improved osteogenic differentiation of BMSCs, elevating the expressions of RUNX2 and OCN. In animal experiments, the combination of TPSNs with photothermal therapy (PTT) achieved an anti-bacterial efficiency of 89.2 % ± 1.6 % against S. aureus. Furthermore, TPSNs significantly improved bone-implant osseointegration in vivo. Overall, the development of a dual-functional TPSNs coating provides a new strategy for combating IAI.

Underlying mechanisms of gold nanoalloys stabilization

Gold nanoclusters have attracted significant attention due to their unique physical-chemical properties, which can be tuned by alloying with elements such as Cu, Pd, Ag, and Pt to design materials for various applications. Although Au-nanoalloys have promising applications, our atomistic understanding of the descriptors that drive their stability is far from satisfactory. To address this problem, we considered 55-atom model nanoalloys that have been synthesized by experimental techniques. Here, we combined data mining techniques for creating a large sample of representative configurations, density functional theory for performing total energy optimizations, and Spearman correlation analyses to identify the most important descriptors. Among our results, we have identified trends in core-shell formation in the AuCu and AuPd systems and an onion-like design in the AuAg system, characterized by the aggregation of gold atoms on nanocluster surfaces. These features are explained by Au's surface energy, packing efficiency, and charge transfer mechanisms, which are enhanced by the alloys' preference for adopting the structure of the alloying metal rather than the low-symmetry one presented by Au55. These generalizations provide insights into the interplay between electronic and structural properties in gold nanoalloys, contributing to the understanding of their stabilization mechanisms and potential applications in various fields.

Palladium nanoclusters as a label to determine GFAP in human serum from donors with stroke by bimodal detection: inductively coupled plasma-mass spectrometry and linear sweep voltammetry

Water-soluble, stable, and monodisperse palladium nanoclusters (PdNCs) were synthesized using NaBH4 as a reductant and lipoic acid as a ligand. PdNCs, measured by high-resolution transmission electron microscopy, showed a round shape and a diameter of 2.49 ± 0.02 nm. It was found that each PdNC contains 550 Pd atoms on average. These PdNCs offer high amplification as a label of biochemical reactions when inductively coupled plasma-mass spectrometry (ICP-MS) is used as a detector. In addition, PdNCs have catalytic activity on electrochemical reactions, allowing detection by linear sweep voltammetry (LSV). As a proof of applicability, a competitive immunoassay based on PdNC labels was developed for the determination of glial fibrillary acidic protein (GFAP) in human serum, comparing ICP-MS and LSV detection. GFAP is a biomarker for differentiating between patients with ischemic stroke (IS) and hemorrhagic stroke (HS). The limit of detection (LoD), corresponding to IC10 (4-parameter logistic curve), was 0.03 pM of GFAP, both by ICP-MS and LSV, being lower than the 0.31 pM LoD provided by the ELISA commercial kit. Using the error profile method, 0.03 pM and 0.11 pM LoDs were obtained respectively by ICP-MS and LSV: LoD is lower by ICP-MS due to the better precision of the measurements. The analyses of human serum samples from IS, HS, and control (CT) donors using PdNC labels and detection by ICP-MS and LSV were validated with a commercial ELISA kit (for CT donors only ICP-MS provided enough sensitivity). Results point out toward the future use of PdNCs as a label in other immunoprobes for the determination of specific proteins requiring very low LoDs as well as the development of electrochemical decentralized methodologies.

Ultrastructure and Surface Composition of Glutathione-Terminated Ultrasmall Silver, Gold, Platinum, and Alloyed Silver-Platinum Nanoparticles (2 nm)

Alloyed ultrasmall silver-platinum nanoparticles (molar ratio Ag:Pt = 50:50) were prepared and compared to pure silver, platinum, and gold nanoparticles, all with a metallic core diameter of 2 nm. They were surface-stabilized by a layer of glutathione (GSH). A comprehensive characterization by high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), differential centrifugal sedimentation (DCS), and UV spectroscopy showed their size both in the dry and in the water-dispersed state (hydrodynamic diameter). Solution NMR spectroscopy (1H, 13C, COSY, HSQC, HMBC, and DOSY) showed the nature of the glutathione shell including the number of GSH ligands on each nanoparticle (about 200 with a molecular footprint of 0.063 nm2 each). It furthermore showed that there are at least two different positions for the GSH ligand on the gold nanoparticle surface. Platinum strongly reduced the resolution of the NMR spectra compared to silver and gold, also in the alloyed nanoparticles. X-ray photoelectron spectroscopy (XPS) showed that silver, platinum, and silver-platinum particles were at least partially oxidized to Ag(+I) and Pt(+II), whereas the gold nanoparticles showed no sign of oxidation. Platinum and gold nanoparticles were well crystalline but twinned (fcc lattice) despite the small particle size. Silver was crystalline in electron diffraction but not in X-ray diffraction. Alloyed silver-platinum nanoparticles were almost fully amorphous by both methods, indicating a considerable internal disorder.

Exploring the potential of metal and metal oxide nanomaterials for sustainable water and wastewater treatment: A review of their antimicrobial properties

Metallic nanoparticles (NPs) are of particular interest as antimicrobial agents in water and wastewater treatment due to their broad suppressive range against bacteria, viruses, and fungi commonly found in these environments. This review explores the potential of different types of metallic NPs, including zinc oxide, gold, copper oxide, and titanium oxide, for use as effective antimicrobial agents in water and wastewater treatment. This is due to the fact that metallic NPs possess a broad suppressive range against bacteria, viruses, as well as fungus. In addition to that, NPs are becoming an increasingly popular alternative to antibiotics for treating bacterial infections. Despite the fact that most research has been focused on silver NPs because of the antibacterial qualities that are known to be associated with them, curiosity about other metallic NPs as potential antimicrobial agents has been growing. Zinc oxide, gold, copper oxide, and titanium oxide NPs are included in this category since it has been demonstrated that these elements have antibacterial properties. Inducing oxidative stress, damage to the cellular membranes, and breakdowns throughout the protein and DNA chains are some of the ways that metallic NPs can have an influence on microbial cells. The purpose of this review was to engage in an in-depth conversation about the current state of the art regarding the utilization of the most important categories of metallic NPs that are used as antimicrobial agents. Several approaches for the synthesis of metal-based NPs were reviewed, including physical and chemical methods as well as "green synthesis" approaches, which are synthesis procedures that do not involve the employment of any chemical agents. Moreover, additional pharmacokinetics, physicochemical properties, and the toxicological hazard associated with the application of silver NPs as antimicrobial agents were discussed.

From M6 to M12, M19 and M38 molecular alloy Pt-Ni carbonyl nanoclusters: selective growth of atomically precise heterometallic nanoclusters

Heterometallic Chini-type clusters [Pt_6-xNi_x(CO)₁₂]^2- (x = 0-6) were obtained by reactions of [Pt₆(CO)₁₂]^2- with Ni-clusters such as [Ni₆(CO)₁₂]^2-, [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, or from [Pt₉(CO)₁₈]^2- and [Ni₆(CO)₁₂]^2-. The Pt/Ni composition of [Pt_6-xNi_x(CO)₁₂]^2- (x = 0-6) depended on the nature of the reagents employed and their stoichiometry. Reactions of [Pt₉(CO)₁₈]^2- with [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, as well as reactions of [Pt₁₂(CO)₂₄]^2- with [Ni₆(CO)₁₂]^2-, [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, afforded [Pt_9-xNi_x(CO)₁₈]^2- (x = 0-9) species. [Pt_6-xNi_x(CO)₁₂]^2- (x = 1-5) were converted into [Pt_12-xNi_x(CO)₂₁]^4- (x = 2-10) upon heating in CH₃CN at 80 °C, with almost complete retention of the Pt/Ni composition. Reaction of [Pt_12-xNi_x(CO)₂₁]^4- (x ≈ 8) with HBF₄·Et₂O afforded the [HPt_14+xNi_24-x(CO)₄₄]^5- (x ≈ 0.7) nanocluster. Finally, [Pt_19-xNi_x(CO)₂₂]^4- (x = 2-6) could be obtained by heating [Pt_9-xNi_x(CO)₁₈]^2- (x = 1-3) in CH₃CN at 80 °C, or [Pt_6-xNi_x(CO)₁₂]^2- (2-4) in DMSO at 130 °C. The molecular structures of these new alloy nanoclusters have been determined by single crystal X-ray diffraction. The site preference of Pt and Ni within their metal cages has been computationally investigated. The electrochemical and IR spectroelectrochemical behavior of [Pt_19-xNi_x(CO)₂₂]^4- (x = 3.11) has been studied and compared to the isostructural homometallic nanocluster [Pt₁₉(CO)₂₂]^4-.

Superatom Pruning by Diphosphine Ligands as a Chemical Scissor

A two-electron silver superatom, [Ag₆{S₂P(OⁱPr)₂}₄(dppm)₂] (1), was synthesized by adding dppm (bis(diphenylphosphino)methane) into [Ag₂₀{S₂P(OⁱPr)₂}₁₂] (8e). It was characterized by single-crystal crystallography, multinuclear NMR spectroscopy, electrospray ionization-mass spectrometry, density functional theory (DFT), and time-dependent DFT calculations. The added dppm ligands, which carry out the nanocluster-to-nanocluster transformation, act as a chemical scissor to prune the nanocluster geometrically from an icosahedron-based Ag₂₀ nanocluster (NC) to an octahedral Ag₆ NC and electronically from eight-electron to two-electron. Eventually, dppm was involved in the protective shell to form a new heteroleptic NC. The temperature-dependent NMR spectroscopy confirms its fluxional behavior, showing the fast atomic movement at ambient temperature. Compound 1 exhibits a bright yellow emission under UV irradiation at ambient temperature with a quantum yield of 16.3%. This work demonstrates a new methodology to achieve nanocluster-to-nanocluster transformation via stepwise synthesis.

Gold nanocluster with AIE: A novel photodynamic antibacterial and deodorant molecule

Designing long-lasting yet high-efficiency antimicrobial and deodorant agents is an everlasting goal for environmental and public health. Here we present the design of AIE-featured Au nanoclusters (NCs) for visible-light-driven antibacterial and deodorant applications. Owing to the intriguing AIE traits, the good harvest of visible-light, and rich surface chemistry, the AIE-featured Au NCs unprecedentedly exhibit excellent visible-light-driven antibacterial activities against gram-positive (≥98.5%) and gram-negative bacteria (≥99.94%), which is resulted from their photodynamic producibility of abundant reactive oxygen species including O₂^•-, •OH and H₂O₂ via O₂ reduction and subsequent H₂O₂ oxidation. In addition, the Au NCs are demonstrated to be biocompatible, and easy to be deployed for downstream antibacterial and deodorant applications. For example, the Au NCs-modified domestic materials (e.g., latex, ceramic glaze, organic fiber, and clothings) achieve long-lasting antibacterial efficiency of 99% and deodorant efficiency of >97.9% under visible-light irradiation. This work may shed light on designing novel AIE-featured metal NCs with photodynamic antibacterial and deodorant functions, enabling metal NCs and corresponding downstream materials to step into the photodynamic antibacterial and deodorant era.

Enhanced Plasmon Based Ag and Au Nanosystems and Their Improved Biomedical Impacts

Numerous specialists and academics have backed the improved physicochemical characteristics of metal substrate (Ag, Au) based composite nanoparticles for a number of applications, including pharmaceuticals, optoelectronics, and environmental impact. Insights of Ag and Au NPs-based nanomaterials will be discussed, as well as important production, physicochemical, and biotechnological characteristics. The plasmon capacities of Ag and Au NPs, along with their customisable form, scale, and surface modification could be described by specified geometries and constituent contents. It was revealed that interaction dynamics of Ag and Au implanted nanomaterials with dopants/defects ratios seem to be more effective in stimulating pathogens by interrupting biochemical reactions. As a result, we focus on defect science in Ag and Au-based nanoscale materials, taking into account surface morphology, ionic packing, and chemical phase assessment. This chapter will cover the important optical, geometrical, and physicochemical features of Ag and Au nanomaterials, and their pharmacological significance.

Tuning the dielectric response in a nanocomposite material through nanoparticle morphology

Ceramic materials such as metal oxides, mixed metal oxides and silicates, constitute a broadly-used, high-performance technology for electronic insulators. The introduction of metal cluster dopants and molecular-scale inclusions in a dielectric matrix provides an opportunity for manufacturing new high-κ solid-state dielectrics with tunable field–response properties. The quantum properties of these metallic nanoparticles depend strongly on their size and shape, a characteristic that can be exploited in changing the response properties of a material, whereas the small nanoparticle size can help limit the issues of conduction and current leakage. Here, we model the polarization of molecular-scale silver inclusions in a magnesium oxide matrix, using the Modern Theory of Polarization and Car–Parrinello Molecular Dynamics (CPMD). Details of the implementation are laid out, including handling of current jumps due to the distortion of the matrix during the simulation. Several trends in the dielectric response are considered in this work, including the effects of nanoparticle size, shape and orientation relative to the applied field. Dielectric permittivity enhancements of 30–100% are observed with inclusion sizes varying from 8 to 32 atoms, considering both rod-like and disk-like inclusions, with alignment either parallel or perpendicular to the external field.

Dielectric response of nanocomposites with metal-nanoparticle inclusions can be enhanced significantly by changing nanoparticle shape and size, even without ramping up volume loading of inclusions.

Nanocluster-Based Drug Delivery and Theranostic Systems: Towards Cancer Therapy

Over the last decades, the global life expectancy of the population has increased, and so, consequently, has the risk of cancer development. Despite the improvement in cancer therapies (e.g., drug delivery systems (DDS) and theranostics), in many cases recurrence continues to be a challenging issue. In this matter, the development of nanotechnology has led to an array of possibilities for cancer treatment. One of the most promising therapies focuses on the assembly of hierarchical structures in the form of nanoclusters, as this approach involves preparing individual building blocks while avoiding handling toxic chemicals in the presence of biomolecules. This review aims at presenting an overview of the major advances made in developing nanoclusters based on polymeric nanoparticles (PNPs) and/or inorganic NPs. The preparation methods and the features of the NPs used in the construction of the nanoclusters were described. Afterwards, the design, fabrication and properties of the two main classes of nanoclusters, namely noble-metal nanoclusters and hybrid (i.e., hetero) nanoclusters and their mode of action in cancer therapy, were summarized.

Ligand-Core Interaction in Ligand-Protected Ag25(XR)18 (X= S, Se, Te) Superatoms. Evaluation of Anchor Atom Role via Relativistic DFT Calculations

The isostructural and isoelectronic silver [Ag25(SR)18]- (R=Ligand) cluster to [Au25(SR)18]- gold clusters allows to further understand the fundamental similarities between Au and Ag, at the ultrasmall nanoscale (< 2 nm)...

Atomically precise silver clusterzymes protect mice from radiation damages

BACKGROUND

As we know, radiotherapy plays an irreplaceable role in the clinical management on solid tumors. However, due to the non-specific killing effects of ionizing radiation, normal tissues damages would be almost simultaneous inevitably. Therefore, ideal radioprotective agents with high efficiency and low toxicity are always desirable. In this work, atomically precise Ag14 clusterzymes were developed, and their applications in radioprotection were studied in vitro and in vivo for the first time.

METHODS

The ultra-small glutathione supported Ag14 clusterzymes were synthesized by convenient sodium borohydride (NaBH4) reduction of thiolate-Ag (I) complexes and then they were purified by desalting columns. The enzyme-like activity and antioxidant capacity of Ag14 clusterzymes have been tested by various commercial kits, salicylic acid method and electron spin resonance (ESR). Next, they were incubated with L929 cells to evaluate whether they could increase cell viability after γ-ray irradiation. And then Ag14 clusterzymes were intravenously injected into C57 mice before 7 Gy whole-body γ-ray irradiation to evaluate the radioprotection effects in vivo. At last, the in vivo toxicities of Ag14 clusterzymes were evaluated through biodistribution test, hematological details, serum biochemical indexes and histological test in female Balb/c mice with intravenous injection of Ag14 clusterzymes.

RESULTS

Our studies suggested atomically precise Ag14 clusterzymes were potential radioprotectants. Ag14 clusterzymes exhibited unique superoxide dismutase (SOD)-like activity, strong anti-oxidative abilities, especially on •OH scavenging. The Ag14 clusterzymes could effectively improve cell viability through eliminating ROS and prevent DNA damages in cells dealt with γ-ray irradiation. In vivo experiments showed that Ag14 clusterzymes could improve the irradiated mice survival rate by protecting hematological systems and repairing tissue oxidative stress damage generated by γ-ray irradiation. In addition, bio-distribution and toxicological experiments demonstrated that the ultrasmall Ag14 clusterzymes could be excreted quickly from the body by renal clearance and negligible toxicological responses were observed in mice up to 30 days.

CONCLUSION

In summary, atomically precise, ultrasmall and water soluble Ag14 clusterzymes with SOD-like activity were successfully developed and proved to be effective both in vitro and in vivo for radioprotection. Furthermore, with atomically precise molecular structure, Ag14 clusterzymes, on aspect of the catalytic and optical properties, may be improved by structure optimization on atom-scale level for other applications in disease diagnosis and treatment.

Atomically Precise Gold Nanoclusters: Towards an Optimal Biocompatible System from a Theoretical-Experimental Strategy

Potential biomedical applications of gold nanoparticles have increasingly been reported with great promise for diagnosis and therapy of several diseases. However, for such a versatile nanomaterial, the advantages and potential health risks need to be addressed carefully, as the available information about their toxicity is limited and inconsistent. Atomically precise gold nanoclusters (AuNCs) have emerged to overcome this challenge due to their unique features, such as superior stability, excellent biocompatibility, and efficient renal clearance. Remarkably, the elucidation of their structural and physicochemical properties provided by theory-experiment investigations offers exciting opportunities for site-specific biofunctionalization of the nanoparticle surface, which remains a significant concern for most of the materials in the biomedical field. This concept highlights the advantages conferred by atomically precise AuNCs for biomedical applications and the powerful strategy combining computational and experimental studies towards finding an optimal biocompatible AuNCs-based nanosystem.