In Vitro Biological Performance of Alginate Hydrogel Capsules for Stem Cell Delivery

Alginate-Based Hydrogels with Amniotic Membrane Stem Cells for Wound Dressing Application

Objective

Chronic wounds are a common clinical problem that necessitate the exploration of novel regenerative therapies. We report a method to investigate the in vitro wound healing capacity of an innovative biomaterial, which is based on amniotic membrane-derived stem cells (AMSCs) embedded in an alginate hydrogel matrix. The aim of this study was to prepare an sodium alginate-based hydrogel, cross-linked calcium chloride (CaCl2) with the active ingredient AMSC (AMSC/Alg-H) and to evaluate its in vitro effectiveness for wound closure.

Methods

This hydrogel preparation involved combining sterile solutions of AMSC, sodium alginate, and CaCl2, followed by rinsing with serum-free media. The cells were cultured in different 6-well plates, namely sodium alginate, calcium chloride, AMSC, Alg-H, and AMSC/Alg-H, in complete medium with 10% FBS. The hydrogel was successfully formulated, as confirmed by characterization techniques including Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, Differential Scanning Calorimetry (DSC), Cytotoxicity Studies, TGF-β1 Level Measurement by ELISA, and Cell Scratch Wound Assay.

Results

Cryo-EM characterization of the Alg-H preparation successfully demonstrated the encapsulation of MSCs. FTIR and DSC analyses indicate that crosslinking transpires in Alg-H encapsulating AMSC. The AMSC/Alg-H preparation showed no significant difference in toxicity compared to HaCaT cells (p < 0.05), indicating it was not toxic to HaCaT cells. Furthermore, in the scratch wound assay test at 24 hours, the AMSC/Alg-H preparation achieved 100% wound closure, outperforming both AMSC and Alg-H alone. In vitro assessment revealed that AMSC/Alg-H significantly enhanced key wound healing processes, including cell proliferation and migration, compared to Alg-H.

Conclusion

Our study demonstrated the promising potential of AMSC/Alg-H as an enhanced regenerative therapy for in vitro wound healing. AMSC/Alg-H was able to maintain the viability of AMSCs and facilitate the formation of tissue-like structures.

Metabolic Mode of Alginate-Encapsulated Human Mesenchymal Stromal Cells as a Background for Storage at Ambient Temperature

Introduction: Human mesenchymal stromal cells (MSCs) are attractive for both medical practice and biomedical research. Nonfreezing short-term storage may provide safe and simple transportation and promote the practical use of MSCs. Objectives: We aimed to determine the duration of efficient storage at ambient temperature (22°C) of human dermal MSCs in different three-dimensional organization and to investigate the role of cell metabolic mode in the resistance to the ambient storage damaging factors. Methods: MSCs in monolayer, suspension, and encapsulated in alginate microspheres (AMS) were stored in sealed containers at 22°С in culture medium. Viability (fluorescein diacetate /ethidium bromide) and metabolic activity (Alamar Blue assay) were assessed at 0, 3, 7, 10, and 14 days of the storage. Mitochondrial membrane potential (JC-1 test), cell cycle analysis, reactive oxygen species level, and resistance to hydrogen peroxide were analyzed under culture conditions. Results: Alginate encapsulation was shown to maintain viability (about 85%), metabolic activity, and adhesion ability during storage for 7 days. The storage of MSCs in both monolayer and suspension was less efficient. Culture of MSCs in AMS decreased basal metabolic activity, mitochondrial activity, and led to reversible cell cycle arrest compared to standard two-dimensional culture. MSCs in AMS have a lower basal level of reactive oxygen species and higher resistance to hydrogen peroxide compared with those in monolayer culture. Conclusion: Revealed shift into quiescent metabolic mode is essential for alginate-encapsulated MSCs resistance to storage at ambient temperature.

The effect of elevating extracellular CaCl2: Important considerations for tissue engineering applications

Polysaccharides such as sodium alginate, pectin and gellan gum are widely used biomaterials, for their ability to easily form hydrogels in the presence of divalent metal ions, such as calcium - a process often cited as a mild crosslinking mechanism. However, when using these materials as substrates for tissue engineering, there is a lack of extensive studies that investigate the impact of elevated calcium concentrations on cell health and behaviour. In this study, we performed an in-depth exploration to understand the potential effects of raising extracellular CaCl2 on cell viability, proliferation, morphology and migration. We used an established glioblastoma (GBM) cell line (U251), human dermal fibroblasts (HDF), and murine osteoblasts (MC3T3) to assess the consequences of using CaCl2 in tissue engineered models to help reevaluate biomaterial suitability and enhance standardisation practices in the field of tissue engineering. Our findings revealed that the addition of CaCl2 induced notable morphological changes in GBM cells when cultured in 3D hydrogels with excess CaCl2 added, leading to a transition from mesenchymal to amoeboid phenotypes, even at a concentration as low as 8 mM. Furthermore, cell viability was reduced in a concentration-dependent manner across all cell types, and migration was also affected. Despite the widespread use of high CaCl2 concentrations to facilitate scaffold gelation, our research unveils that there can be significant risks to cell viability, proliferation, morphology, and migration when such practices are not preceded by cell line-specific experimentation and thorough standardization procedures. This highlights the importance of careful consideration and optimisation of CaCl2 concentration when used as a crosslinking agent for hydrogels intended for use in tissue engineering applications that demand accurate recapitulation of cellular responses and physiological conditions.

Alginate Formulation for Wound Healing Applications

Significance: Alginate, sourced from seaweed, holds significant importance in industrial and biomedical domains due to its versatile properties. Its chemical composition, primarily comprising β-D-mannuronic acid and α-L-guluronic acid, governs its physical and biological attributes. This polysaccharide, extracted from brown algae and bacteria, offers diverse compositions impacting key factors such as molecular weight, flexibility, solubility, and stability. Recent Advances: Commercial extraction methods yield soluble sodium alginate essential for various biomedical applications. Extraction processes involve chemical treatments converting insoluble alginic acid salts into soluble forms. While biosynthesis pathways in bacteria and algae share similarities, differences in enzyme utilization and product characteristics are noted. Critical Issues: Despite its widespread applicability, challenges persist regarding alginate's stability, biodegradability, and bioactivity. Further understanding of its interactions in complex biological environments and the optimization of extraction and synthesis processes are imperative. Additionally, concerns regarding immune responses to alginate-based implants necessitate thorough investigation. Future Directions: Future research endeavors aim to enhance alginate's stability and bioactivity, facilitating its broader utilization in regenerative medicine and therapeutic interventions. Novel approaches focusing on tailored hydrogel formations, advanced drug delivery systems, and optimized cellular encapsulation techniques hold promise. Continued exploration of alginate's potential in tissue engineering and wound healing, alongside efforts to address critical issues, will drive advancements in biomedical applications.

Synthesis of agro-industrial wastes/sodium alginate/bovine gelatin-based polysaccharide hydrogel beads: Characterization and application as controlled-release microencapsulated fertilizers

Synthesis of novel agro-industrial wastes/sodium alginate/bovine gelatin-based polysaccharide hydrogel beads, micromeritic/morphometric characteristics of the prepared formulations, greenhouse trials using controlled-release microencapsulated fertilizers, and acute fish toxicity testing were conducted simultaneously for the first time within the scope of an integrated research. In the present analysis, for the first time, 16 different morphometric features, and 32 disinct plant growth traits of the prepared composite beads were explored in detail within the framework of a comprehensive digital image analysis. The hydrogel beads composed of 19 different agro-industrial wastes/materials were successfully synthesized using the ionotropic external gelation technique and CaCl2 as cross-linker. According to micromeritic characteristics, the ionotropically cross-linked beads exhibited 77.86 ± 3.55 % yield percentage and 2.679 ± 0.397 mm average particle size. The dried microbeads showed a good swelling ratio (270.02 ± 80.53 %) and had acceptable flow properties according to Hausner's ratio (1.136 ± 0.028), Carr's index (11.94 ± 2.17 %), and angle of repose (25.03° ± 5.33°) values. The settling process of the prepared microbeads was observed in the intermediate flow regime, as indicated by the average particle Reynolds numbers (169.17 ± 82.81). Experimental findings and non-parametric statistical tests reveal that dried fertilizer matrices demonstrated noteworthy performance on the cultivation of red hot chili pepper plant (Capsicum annuum var. fasciculatum) according to the results of greenhouse trials. Surface morphologies of the best-performing fertilizer matrices were also characterized by Scanning Electron Microscopy. Moreover, the static fish bioassay experiment confirmed that no abnormalities and acute toxic reactions occurred in shortfin molly fish (Poecilia sphenops) fed with dried leaves of red hot chili pepper plants grown with formulated fertilizers. This study showcased a pioneering investigation into the synthesis of microcapsules using synthesized hydrogel beads along with digital image processing for bio-waste management and sustainable agro-application.

Engineered stem cells by emerging biomedical stratagems

Stem cell therapy holds immense potential as a viable treatment for a widespread range of intractable disorders. As the safety of stem cell transplantation having been demonstrated in numerous clinical trials, various kinds of stem cells are currently utilized in medical applications. Despite the achievements, the therapeutic benefits of stem cells for diseases are limited, and the data of clinical researches are unstable. To optimize tthe effectiveness of stem cells, engineering approaches have been developed to enhance their inherent abilities and impart them with new functionalities, paving the way for the next generation of stem cell therapies. This review offers a detailed analysis of engineered stem cells, including their clinical applications and potential for future development. We begin by briefly introducing the recent advances in the production of stem cells (induced pluripotent stem cells (iPSCs), embryonic stem cells (ESCs), mesenchymal stem cells (MSCs) and hematopoietic stem cells (HSCs)). Furthermore, we present the latest developments of engineered strategies in stem cells, including engineered methods in molecular biology and biomaterial fields, and their application in biomedical research. Finally, we summarize the current obstacles and suggest future prospects for engineered stem cells in clinical translations and biomedical applications.

Formulation and Characterization of a Novel Oxidized Alginate-Gelatin-Silk Fibroin Bioink with the Aim of Skin Regeneration

Background

In the present study, a novel bioink was suggested based on the oxidized alginate (OAlg), gelatin (GL), and silk fibroin (SF) hydrogels.

Methods

The composition of the bioink was optimized by the rheological and printability measurements, and the extrusion-based 3D bioprinting process was performed by applying the optimum OAlg-based bioink.

Results

The results demonstrated that the viscosity of bioink was continuously decreased by increasing the SF/GL ratio, and the bioink displayed a maximum achievable printability (92 ± 2%) at 2% (w/v) of SF and 4% (w/v) of GL. Moreover, the cellular behavior of the scaffolds investigated by MTT assay and live/dead staining confirmed the biocompatibility of the prepared bioink.

Conclusion

The bioprinted OAlg-GL-SF scaffold could have the potential for using in skin tissue engineering applications, which needs further exploration.

Biological Macromolecule-Based Scaffolds for Urethra Reconstruction

Urethral reconstruction strategies are limited with many associated drawbacks. In this context, the main challenge is the unavailability of a suitable tissue that can endure urine exposure. However, most of the used tissues in clinical practices are non-specialized grafts that finally fail to prevent urine leakage. Tissue engineering has offered novel solutions to address this dilemma. In this technology, scaffolding biomaterials characteristics are of prime importance. Biological macromolecules are naturally derived polymers that have been extensively studied for various tissue engineering applications. This review discusses the recent advances, applications, and challenges of biological macromolecule-based scaffolds in urethral reconstruction.

3D-Cultured Adipose-Derived Stem Cell Spheres Using Calcium-Alginate Scaffolds for Osteoarthritis Treatment in a Mono-Iodoacetate-Induced Rat Model

Osteoarthritis (OA) is a degenerative disease that causes pain, cartilage deformation, and joint inflammation. Mesenchymal stem cells (MSCs) are potential therapeutic agents for OA treatment. However, the 2D culture of MSCs could potentially affect their characteristics and functionality. In this study, calcium-alginate (Ca-Ag) scaffolds were prepared for human adipose-derived stem cell (hADSC) proliferation with a homemade functionally closed process bioreactor system; the feasibility of cultured hADSC spheres in heterologous stem cell therapy for OA treatment was then evaluated. hADSC spheres were collected from Ca-Ag scaffolds by removing calcium ions via ethylenediaminetetraacetic acid (EDTA) chelation. In this study, 2D-cultured individual hADSCs or hADSC spheres were evaluated for treatment efficacy in a monosodium iodoacetate (MIA)-induced OA rat model. The results of gait analysis and histological sectioning showed that hADSC spheres were more effective at relieving arthritis degeneration. The results of serological and blood element analyses of hADSC-treated rats indicated that the hADSC spheres were a safe treatment in vivo. This study demonstrates that hADSC spheres are a promising treatment for OA and can be applied to other stem cell therapies or regenerative medical treatments.

Microfluidic Seeding of Cells on the Inner Surface of Alginate Hollow Microfibers

Mimicking microvascular tissue microenvironment in vitro calls for a cytocompatible technique of manufacturing biocompatible hollow microfibers suitable for cell-encapsulation/seeding in and around them. The techniques reported to date either have a limit on the microfiber dimensions or undergo a complex manufacturing process. Here, a microfluidic-based method for cell seeding inside alginate hollow microfibers is designed whereby mouse astrocytes (C8-D1A) are passively seeded on the inner surface of these hollow microfibers. Collagen I and poly-d-lysine, as cell attachment additives, are tested to assess cell adhesion and viability; the results are compared with nonadditive-based hollow microfibers (BARE). The BARE furnishes better cell attachment and higher cell viability immediately after manufacturing, and an increasing trend in the cell viability is observed between Day 0 and Day 2. Swelling analysis using percentage initial weight and width is performed on BARE microfibers furnishing a maximum of 124.1% and 106.1%, respectively. Degradation analysis using weight observed a 62% loss after 3 days, with 46% occurring in the first 12 h. In the frequency sweep test performed, the storage modulus (G') remains comparatively higher than the loss modulus (G″) in the frequency range 0-20 Hz, indicating high elastic behavior of the hollow microfibers.