Magnesium Nanoparticles With Pd Decoration for Hydrogen Storage

Reactive Magnesium Nanoparticles to Perform Reactions in Suspension

Zerovalent magnesium (Mg(0)) nanoparticles are prepared in the liquid phase (THF) by reduction of MgBr2 either with lithium naphthalenide ([LiNaph]) or lithium biphenyl ([LiBP]). [LiBP]-driven reduction results in smaller Mg(0) nanoparticles (10.3±1.7 nm) than [LiNaph]-driven reduction (28.5±4 nm). The as-prepared Mg(0) nanoparticles are monocrystalline (d101=245±5 pm) for both types of reduction. Their reactivity is probed by liquid-phase reaction (THF, toluene) in suspension near room temperature (20-120 °C) with 1-bromoadamantane (AdBr), chlortriphenylsilane (Ph3SiCl), trichlorphenylsilane (PhSiCl3), 9H-carbazole (Hcbz), 7-azaindole (Hai), 1,8-diaminonaphthalene (H4nda) and N,N'-bis(α-pyridyl)-2,6-diaminopyridine (H2tpda) as exemplary starting materials. The reactions result in the formation of 1,1'-biadamantane (1), [MgCl2(thf)2]×Ph6Si2 (2), [Mg9(thf)14Cl18] (3), [Mg(cbz)2(thf)3] (4), [Mg4O(ai)6]×1.5 C7H8 (5), [Mg4(H2nda)4(thf)4] (6) and [Mg3(tpda)3] (7) with 40-80 % yield. 1 and 2 show the reactivity of Mg(0) nanoparticles for C-C and Si-Si coupling reactions with sterically demanding starting materials. 3-7 represent new coordination compounds using sterically demanding N-H-acidic amines as starting materials. The formation of multinuclear Mg2+ complexes with multidentate ligands illustrates the potential of the oxidative approach to obtain novel compounds with Mg(0) nanoparticles in the liquid phase.

Improvement of the Hydrogen Storage Characteristics of MgH2 with Al Nano-Catalyst Produced by the Method of Electric Explosion of Wires

A new composite with a core-shell structure based on magnesium hydride and finely dispersed aluminum powder with an aluminum oxide shell was mechanically synthesized. We used magnesium chips to produce magnesium hydride and aluminum wire after exploitation to produce nano-sized aluminum powder. The beginning of the hydrogen release from the composite occurred at the temperature of 117 °C. The maximum desorption temperature from the MgH2-EEWAl composite (10 wt.%) was 336 °C, compared to pure magnesium hydride-417 °C. The mass content of hydrogen in the composite was 5.5 wt.%. The positive effect of the aluminum powder produced by the electric explosion of wires method on reducing the activation energy of desorption was demonstrated. The composite's desorption activation energy was found to be 109 ± 1 kJ/mol, while pure magnesium hydride had an activation energy of 161 ± 2 kJ/mol. The results obtained make it possible to expand the possibility of using magnesium and aluminum waste for hydrogen energy.

On the Catalytic Mechanism of 3d and 4d Transition-Metal-Based Materials on the Hydrogen Sorption Properties of Mg/MgH2

The slow hydrogenation/dehydrogenation kinetics and high thermodynamic stability of the Mg–H bond are the two major limitations for the large-scale utilization of MgH2. In this review, we introduce the catalytic mechanism of 3d and 4d transition metal (TM) on the hydrogen sorption properties of Mg/MgH2. The relative contribution of interatomic interactions to the thermodynamic stability of the TM-substituted MgH2 system is discussed. A synergy effect between the electronegativity and the radius of the TM element is proposed to explain the charge transfer process between TM and H in the TM-substituted MgH2 system. The catalytic mechanism of TM nearby the surface of Mg is more complicated than that in the volume of Mg, as the surface-doped TM can experience more options for doping sites, leading to the hindrance effect and causing various contributions of the d band center to the dissociation of hydrogen molecules and the diffusion of hydrogen atoms nearby the surface of Mg. In terms of the catalytic mechanism of TM for hydrogen sorption kinetics of Mg/MgH2, we particularly focused on the “hydrogen pump” effect existing in the Mg–TM–H system. Other mechanisms, such as a possible catalytic mechanism of TM for the hydrogen sorption properties of nano-sized freestanding Mg/MgH2, were also presented.

Recent Development in Nanoconfined Hydrides for Energy Storage

Hydrogen is the ultimate vector for a carbon-free, sustainable green-energy. While being the most promising candidate to serve this purpose, hydrogen inherits a series of characteristics making it particularly difficult to handle, store, transport and use in a safe manner. The researchers' attention has thus shifted to storing hydrogen in its more manageable forms: the light metal hydrides and related derivatives (ammonia-borane, tetrahydridoborates/borohydrides, tetrahydridoaluminates/alanates or reactive hydride composites). Even then, the thermodynamic and kinetic behavior faces either too high energy barriers or sluggish kinetics (or both), and an efficient tool to overcome these issues is through nanoconfinement. Nanoconfined energy storage materials are the current state-of-the-art approach regarding hydrogen storage field, and the current review aims to summarize the most recent progress in this intriguing field. The latest reviews concerning H2 production and storage are discussed, and the shift from bulk to nanomaterials is described in the context of physical and chemical aspects of nanoconfinement effects in the obtained nanocomposites. The types of hosts used for hydrogen materials are divided in classes of substances, the mean of hydride inclusion in said hosts and the classes of hydrogen storage materials are presented with their most recent trends and future prospects.

Vaporization-Controlled Energy Release Mechanisms Underlying the Exceptional Reactivity of Magnesium Nanoparticles

Magnesium nanoparticles (NPs) offer the potential of high-performance reactive materials from both thermodynamic and kinetic perspectives. However, the fundamental energy release mechanisms and kinetics have not been explored due to the lack of facile synthetic routes to high-purity Mg NPs. Here, a vapor-phase route to surface-pure, core-shell nanoscale Mg particles is presented, whereby controlled evaporation and growth are utilized to tune particle sizes (40-500 nm), and their size-dependent reactivity and energetic characteristics are evaluated. Extensive in situ characterizations shed light on the fundamental reaction mechanisms governing the energy release of Mg NP-based energetic composites across particle sizes and oxidizer chemistries. Direct observations from in situ transmission electron microscopy and high-speed temperature-jump/time-of-flight mass spectrometry coupled with ignition characterization reveal that the remarkably high reactivity of Mg NPs is a direct consequence of enhanced vaporization and Mg release from their high-energy surfaces that result in the accelerated energy release kinetics from their composites. Mg NP composites also demonstrate mitigated agglomeration and sintering during reaction due to rapid gasification, enabling complete energy extraction from their oxidation. This work expands the compositional possibilities of nanoscale solid fuels by highlighting the critical relationships between metal volatilization and oxidative energy release from Mg NPs, thus opening new opportunities for strategic design of functional Mg-based nanoenergetic materials for tunable energy release.

Size Control in the Colloidal Synthesis of Plasmonic Magnesium Nanoparticles

Nanoparticles of plasmonic materials can sustain oscillations of their free electron density, called localized surface plasmon resonances (LSPRs), giving them a broad range of potential applications. Mg is an earth-abundant plasmonic material attracting growing attention owing to its ability to sustain LSPRs across the ultraviolet, visible, and near-infrared wavelength range. Tuning the LSPR frequency of plasmonic nanoparticles requires precise control over their size and shape; for Mg, this control has previously been achieved using top-down fabrication or gas-phase methods, but these are slow and expensive. Here, we systematically probe the effects of reaction parameters on the nucleation and growth of Mg nanoparticles using a facile and inexpensive colloidal synthesis. Small NPs of 80 nm were synthesized using a low reaction time of 1 min and ∼100 nm NPs were synthesized by decreasing the overall reaction concentration, replacing the naphthalene electron carrier with biphenyl or using metal salt additives of FeCl3 or NiCl2 at longer reaction times of 17 h. Intermediate sizes up to 400 nm were further selected via the overall reaction concentration or using other metal salt additives with different reduction potentials. Significantly larger particles of over a micrometer were produced by reducing the reaction temperature and, thus, the nucleation rate. We showed that increasing the solvent coordination reduced Mg NP sizes, while scaling up the reaction reduced the mixing efficiency and produced larger NPs. Surprisingly, varying the relative amounts of Mg precursor and electron carrier had little impact on the final NP sizes. These results pave the way for the large-scale use of Mg as a low-cost and sustainable plasmonic material.

The Catalytic Role of D-block Elements and Their Compounds for Improving Sorption Kinetics of Hydride Materials: A Review

The goal of finding efficient and safe hydrogen storage material motivated researchers to develop several materials to fulfil the demand of the U.S. Department of Energy (DOE). In the past few years, several metal hydrides, complex hydrides such as borohydrides and alanates, have been researched and found efficient due to their high gravimetric and volumetric density. However, the development of these materials is still limited by their high thermodynamic stability and sluggish kinetics. One of the methods to improve the kinetics is to use catalysts. Among the known catalysts for this purpose, transition metals and their compounds are known as the leading contender. The present article reviews the d-block transition metals including Ni, Co, V, Ti, Fe and Nb as catalysts to boost up the kinetics of several hydride systems. Various binary and ternary metal oxides, halides and their combinations, porous structured hybrid designs and metal-based Mxenes have been discussed as catalysts to enhance the de/rehydrogenation kinetics and cycling performance of hydrogen storage systems.

Effect of CeH2.73-CeO2 Composites on the Desorption Properties of Mg2NiH4

A series of CeH_2.73/CeO₂ composites with different ratios of hydride and oxide phases are prepared from the pure cerium hydride via oxidation treatments in the air at room temperature, and they are subsequently doped into Mg₂NiH₄ by ball milling. The desorption properties of the as-prepared Mg₂NiH₄+CeH_2.73/CeO₂ composites are studied by thermogravimetry and differential scanning calorimetery. Microstructures are studied by scanning electron microscopy and transmission electron microscopy, and the phase transitions during dehydrogenation are analyzed through in situ X-ray diffraction. Results show that the initial dehydrogenation temperature and activation energy of Mg₂NiH₄ are maximally reduced by doping the CeH_2.73/CeO₂ composite with the same molar ratio of cerium hydride and oxide. In this case, the CeH_2.73/CeO₂ composite has the largest density of interface among them, and the hydrogen release effect at the interface between cerium hydride and oxide plays an efficient catalytic role in enhancing the hydrogen desorption properties of Mg₂NiH₄.