Cu-Based Conductive MOF Grown in situ on Cu Foam as a Highly Selective and Stable Non-Enzymatic Glucose Sensor

In situ fast self-assembled preparation of dandelion-like Cu(OH)2@Cu3(HHTP)2 with core-shell heterostructure arrays for electrochemical sensing of formaldehyde in food samples

Formaldehyde is known to harm the respiratory, nervous, and digestive systems of people. In this paper, a novel dandelion-like electrocatalyst with core-shell heterostructure arrays were fast self-assembled prepared in situ using copper foam (CF) as support substrate and 2,3,6,7,10,11 hexahydroxy-triphenyl (HHTP) as ligand (Cu(OH)2@Cu3(HHTP)2/CF) by a simple two-step hydrothermal reaction. The 1D Cu(OH)2 nanorods "core" and the 2D π-conjugated conducting metal-organic frameworks (Cu3(HHTP)2cMOF) "shell" with remote delocalized electrons give the dandelion-like heterogeneous catalysts excellent electrochemical activity such as a large specific surface area, high conductivity and a fast electron transfer rate. The Cu(OH)2@Cu3(HHTP)2/CF exhibited excellent electrocatalytic performance for formaldehyde under alkaline conditions with a linear range of 0.2 μmol/L - 125 μmol/L and 125 μmol/L - 8 mmol/L, a detection limit as low as 15.9 nmol/L (S/N = 3), as well as good accuracy, consistency, and durability, and it effectively identified FA in food.

Cu/Cu2O/C nanoparticles and MXene based composite for non-enzymatic glucose sensors

Copper/Cuprous oxide/Carbon nanoparticles decorated MXene composite was prepared and subsequently examined for its potential application as a non-enzymatic glucose sensor. To carry out this, initially the Cu MOF/MXene composite was synthesised by the hydrothermal method and was annealed in an unreacted environment at different time intervals. During this process, petal like Cu MOF on MXene loses the organic ligands to form a Cu/Cu2O/C based nanoparticles on MXene. Further, an electrode was fabricated with the developed material for understanding the sensing performance by cyclic voltammetry and chronoamperometry in 0.1 M NaOH solution. Results reveal that the highest weight percentage of copper oxide in the composite (15 min of annealed material) shows a higher electro catalytic activity for sensing glucose molecules due to more active sites with good electron transfer ability in the composite. The formed composite exhibits a wide linear range of 0.001-26.5 mM, with a sensitivity of 762.53μAmM-1cm-2(0.001-10.1 mM), and 397.18μAmM-1cm-2(11.2-26.9 mM) and the limit of detection was 0.103μM. In addition to this, the prepared electrode shows a good reusability, repeatability, selectivity with other interferences, stability (93.65% after 30 days of storage), and feasibility of measuring glucose in real samples. This finding reveals that the metal oxide derived from MOF based nanoparticle on the MXene surface will promote the use of non-enzymatic glucose sensors.

Copper-Based Two-Dimensional Metal-Organic Frameworks for Fenton-like Photocatalytic Degradation of Methylene Blue under UV and Sunlight Irradiation

To efficiently degrade organic pollutants, photocatalysts must be effective under both ultraviolet (UV) radiation and sunlight. We synthesized a series of new metal-organic frameworks by using mild hydrothermal conditions. These frameworks incorporate three distinct bipyridyl ligands: pyrazine (pyr), 4,4'-bipyridine (bpy), and 1,2-bis(4-pyridyl)ethane (bpe). The resulting compounds are denoted as [Cu(pyz)(H2O)2MF6], [Cu(bpy)2(H2O)2]·MF6, and [Cu(bpe)2(H2O)2]·MF6·H2O [M = Zr (1, 3, and 5) and Hf (2, 4, and 6)]. All six compounds exhibited a two-dimensional crystal structure comprising infinitely nonintersecting linear chains. Compound 3 achieved 100% degradation of methylene blue (MB) after 8 min under UV irradiation and 100 min under natural sunlight in the presence of H2O2 as the electron acceptor. For compound 5, 100% MB degradation was achieved after 120 min under sunlight and 10 min under UV light. Moreover, reactive radical tests revealed that the dominant species involved in photocatalytic degradation are hydroxyl (•OH), superoxide radicals (•O2-), and photogenerated holes (h+). The photodegradation process followed pseudo-first-order kinetics, with photodegradation rate constants of 0.362 min-1 (0.039 min-1) for 3 and 0.316 min-1 (0.033 min-1) for 5 under UV (sunlight) irradiation. The developed photocatalysts with excellent activity and good recyclability are promising green catalysts for degrading organic pollutants during environmental decontamination.

Au nanoparticle-embellished UiO-66 on reduced graphene oxide as a non-enzymatic electrocatalyst at a remarkably low oxidation potential for glucose oxidation and sensing

Au nanoparticle-embellished metal-organic framework UiO-66 on reduced graphene oxide (Au/UiO-66/rGO) was synthesized. Au/UiO-66/rGO displayed strong electrocatalytic activity for oxidation of glucose in alkaline solution at a remarkably low oxidation potential of +0.20 V vs. Ag/AgCl. Au nanoparticles played a paramount role in the catalytic oxidation of glucose at the electrode, while both rGO and UiO-66 can significantly enhance the current responses to glucose. The resulting non-enzymatic glucose sensor exhibited a wide range of linear response, high sensitivity and selectivity for the determination of glucose. The sensor was successfully applied for the determination of glucose in honey products.

Glucose and UA sensing based on Cu nanoparticle decorated Nif/GO flexible electrode

A novel, green, and facile approach has been developed to construct an ultrasensitive flexible enzyme-less electrochemical sensor on the basis of chitosan and graphene oxide composites decorated with Cu nanoparticles supported on nickel foam (Nif/Cs/GO@Cu), in which GO functions as the intermediate between Nif and Cu nanoparticles. The Nif/Cs/GO@Cu sensing platform was successfully fabricated by the drop casting method to load Cs/GO onto Nif followed by an additionally electrodeposition to support Cu nanoparticles on Nif/Cs/GO. Impressively, the Nif/Cs/GO@Cu exhibited much higher electrocatalytic activity for glucose and UA oxidation as compared to that of Nif or Nif@Cu. For glucose and UA at about 0.6 V and 0.1 V (vs. Ag/AgCl), linearity could be obtained in the concentration ranges 5 µM-4 mM and 5-345 µM; the sensitivities were 16 and 2.5 µA µM-1 cm-2, and the detection limits 83 nM and 0.3 µM, respectively. The improved performance of the composite electrode was ascribed to the synergistic effect of Cu nanoparticles, Nif and GO, in which GO provides high electron conductivity and large surface area to prevent the agglomeration of Cu nanoparticles; Cu nanoparticles and Nif offer abundant active sites towards analytes oxidation. Additionally, the method was applied to determine both analytes successfully in blood serum samples with excellent recovery and also opens up an attractive route to potential applications of the flexible nickel foam-based electrochemical sensor.

Electrochemical Detection of Flutamide by the Composite of Complex Based on Thiacalix[4]arene Derivatives and Reduced Graphene Oxide

In this paper, a thiacalix[4]arene complex [Zn2(TIT4A)L2]·4DMF·2CH3OH (H2L = 4,4'-oxybisbenzoic acid) (Zn-TIT4A-L) was synthesized by a solvothermal method. The composites were prepared by combining Zn-TIT4A-L with reduced graphene oxide (RGO), mesoporous carbon (MC), and multi-walled carbon nanotubes (MWCNTs), respectively. Three representative composites are Zn-TIT4A-L@RGO(1:1), Zn-TIT4A-L@MC(1:2), and Zn-TIT4A-L@MWCNT(1:2). X-ray diffraction and scanning electron microscopy characterized their structures and morphologies. The results showed that three composites were successfully prepared, and the crystals of the complex remained in the composites. The electrochemical properties of the composites were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The results indicated that they had good electrocatalytic activity and conductivity. Among them, Zn-TIT4A-L@RGO(1:1) had the best performance and was used for the quantitative detection of flutamide (FTA). The linear range of detection is 0.1-200 μM, and the limit of detection is 0.015 μM. At the same time, the sensor also had good reproducibility, anti-interference, and stability. The sensor was also used for the detection of FTA in lake water, human urine, and serum with a satisfactory recovery rate. The possible mechanism of electrochemical detection of FTA was also discussed.

Recent Progress in MOF-Based Electrochemical Sensors for Non-Enzymatic Glucose Detection

In recent years, substantial advancements have been made in the development of enzyme-free glucose sensors utilizing pristine metal-organic frameworks (MOFs) and their combinations. This paper provides a comprehensive exploration of various MOF-based glucose sensors, encompassing monometallic MOF sensors as well as multi-metal MOF combinations. These approaches demonstrate improved glucose detection capabilities, facilitated by the augmented surface area and availability of active sites within the MOF structures. Furthermore, the paper delves into the application of MOF complexes and derivatives in enzyme-free glucose sensing. Derivatives incorporating carbon or metal components, such as carbon cloth synthesis, rGO-MOF composites, and core-shell structures incorporating noble metals, exhibit enhanced electrochemical performance. Additionally, the integration of MOFs with foams or biomolecules, such as porphyrins, enhances the electrocatalytic properties for glucose detection. Finally, this paper concludes with an outlook on the future development prospects of enzyme-free glucose MOF sensors.

A chiral metal-organic framework synthesized by the mixture of chiral and non-chiral organic ligands for enantioseparation of drugs by open-tubular capillary electrochromatography

A chiral metal-organic framework L-Histidine-Zeolitic imidazolate framework-67 (L-His-ZIF-67) was synthesized by the mixture of chiral organic ligand L-histidine and non-chiral organic ligand 2-methylimidazole directly, and to the author's knowledge, the chiral L-His-ZIF-67 coated capillary column we prepared has still not been reported to date in the field of capillary electrophoresis. This chiral metal-organic frameworks material was used as the chiral stationary phase for enantioseparation of drugs by open-tubular capillary electrochromatography. The separation conditions such as pH value, buffer concentration and proportion of organic modifier were optimized. Under optimal conditions, the established enantioseparation system achieved good separation effect, and the resolution of five chiral drugs: esmolol (7.93), nefopam (3.03), salbutamol (2.42), scopolamine (1.08) and sotalol (0.81). In addition, the chiral recognition mechanism of L-His-ZIF-67 was elucidated by a series of mechanism experiments, and the specific interaction force was preliminarily speculated.

Ultra-thin 2D bimetallic MOF nanosheets for highly sensitive and stable detection of glucose in sweat for dancer

The measurement of glucose concentration in sweat is expected to replace the existing blood glucose detection, which realize the effective way of non-invasive monitoring of human glucose concentration in dancing. High precision glucose detection can be achieved by adjusting the electrode material of the sensor. Thus, in this work, the bimetallic organic frameworks (bi-MOFs) materials containing Mn and Ni ions (NiMn-MOF) with ultrathin nanosheets have been exquisitely designed. The ultrathin nanosheet and heterogeneous metal ions in the structure optimize the electronic structure, which improves the electrical conductivity of MOFs. The success of the preparation strategy leads the good electrocatalytic performance of NiMn-MOF for glucose detection. Detailedly, NiMn-MOF shows high sensitivity of 1576 μA mM-1 cm-2 in the linear range from 0 to 0.205 mM and the wide linear region of 0.255-2.655 mM and 3.655-5.655 mM were also observed. In addition, the high repeatability, reproductivity, long-term stability and ultra-low limited of detection (LOD, 0.28 μM, S/N = 3) provide foundation for the practical sensor application of this NiMn-MOF nanosheets. Remarkably, as designed NiMn-MOF sensor can accurately measure glucose in sweat showing great potential in the field of wearable glucose monitoring during dancing.

3D Printed Voltammetric Sensor Modified with an Fe(III)-Cluster for the Enzyme-Free Determination of Glucose in Sweat

In this work, a 3D printed sensor modified with a water-stable complex of Fe(III) basic benzoate is presented for the voltammetric detection of glucose (GLU) in acidic epidermal skin conditions. The GLU sensor was produced by the drop-casting of Fe(III)-cluster ethanolic mixture on the surface of a 3D printed electrode fabricated by a carbon black loaded polylactic acid filament. The oxidation of GLU was electrocatalyzed by Fe(III), which was electrochemically generated in-situ by the Fe(III)-cluster precursor. The GLU determination was carried out by differential pulse voltammetry without the interference from common electroactive metabolites presented in sweat (such as urea, uric acid, and lactic acid), offering a limit of detection of 4.3 μmol L-1. The exceptional electrochemical performance of [Fe3O(PhCO2)6(H2O)3]∙PhCO2 combined with 3D printing technology forms an innovative and low-cost enzyme-free sensor suitable for noninvasive applications, opening the way for integrated 3D printed wearable biodevices.

Electrospun nanofiber-based glucose sensors for glucose detection

Diabetes is a chronic, systemic metabolic disease that leads to multiple complications, even death. Meanwhile, the number of people with diabetes worldwide is increasing year by year. Sensors play an important role in the development of biomedical devices. The development of efficient, stable, and inexpensive glucose sensors for the continuous monitoring of blood glucose levels has received widespread attention because they can provide reliable data for diabetes prevention and diagnosis. Electrospun nanofibers are new kinds of functional nanocomposites that show incredible capabilities for high-level biosensing. This article reviews glucose sensors based on electrospun nanofibers. The principles of the glucose sensor, the types of glucose measurement, and the glucose detection methods are briefly discussed. The principle of electrospinning and its applications and advantages in glucose sensors are then introduced. This article provides a comprehensive summary of the applications and advantages of polymers and nanomaterials in electrospun nanofiber-based glucose sensors. The relevant applications and comparisons of enzymatic and non-enzymatic nanofiber-based glucose sensors are discussed in detail. The main advantages and disadvantages of glucose sensors based on electrospun nanofibers are evaluated, and some solutions are proposed. Finally, potential commercial development and improved methods for glucose sensors based on electrospinning nanofibers are discussed.

Quasi-aligned Cu2S/Cu(OH)2nanorod arrays anchored on Cu foam as self-supported electrode for non-enzymatic glucose detection

Self-supported Cu₂S/Cu(OH)₂composite nanorods for highly sensitive non-enzymatic glucose sensing werein situgrown on Cu foam by simple hydrothermal treatment of aligned Cu(OH)₂nanorods. The physicochemical and electrochemical properties of the as-fabricated Cu₂S/Cu(OH)₂composite nanorods were characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, Raman spectroscope, x-ray photoelectron spectroscope, cyclic voltammetry, electrochemical impedance spectroscopy, amperometrici-tmeasurements. The mechanism of the composite nanorods produced on conductive substrates was also explored. The electrode exhibits a sensitivity of 9626.88μA mM^-1cm^-2towards glucose with good anti-interference ability, indicating it a promising electrode material for the enhanced non-enzymatic glucose detection.