Issues in Continuous 24-h Core Body Temperature Monitoring in Humans Using an Ingestible Capsule Telemetric Sensor

Optimal sampling interval for characterisation of the circadian rhythm of body temperature in homeothermic animals using periodogram and cosinor analysis

Core body temperature (T c) is a critical aspect of homeostasis in birds and mammals and is increasingly used as a biomarker of the fitness of an animal to its environment. Periodogram and cosinor analysis can be used to estimate the characteristics of the circadian rhythm of T c from data obtained on loggers that have limited memory capacity and battery life. The sampling interval can be manipulated to maximise the recording period, but the impact of sampling interval on the output of periodogram or cosinor analysis is unknown. Some basic guidelines are available from signal analysis theory, but those guidelines have never been tested on T c data. We obtained data at 1-, 5- or 10-min intervals from nine avian or mammalian species, and re-sampled those data to simulate logging at up to 240-min intervals. The period of the rhythm was first analysed using the Lomb-Scargle periodogram, and the mesor, amplitude, acrophase and adjusted coefficient of determination (R 2) from the original and the re-sampled data were obtained using cosinor analysis. Sampling intervals longer than 60 min did not affect the average mesor, amplitude, acrophase or adjusted R 2, but did impact the estimation of the period of the rhythm. In most species, the period was not detectable when intervals longer than 120 min were used. In all individual profiles, a 30-min sampling interval modified the values of the mesor and amplitude by less than 0.1°C, and the adjusted R 2 by less than 0.1. At a 30-min interval, the acrophase was accurate to within 15 min for all species except mice. The adjusted R 2 increased as sampling frequency decreased. In most cases, a 30-min sampling interval provides a reliable estimate of the circadian T c rhythm using periodogram and cosinor analysis. Our findings will help biologists to select sampling intervals to fit their research goals.

Similarities and differences regarding acute anorexia nervosa and semi-starvation: does behavioral thermoregulation play a central role?

Objective

To clarify the association between acute anorexia nervosa (AN) and semi-starvation (SS) by focusing on similarities and differences in physiology, mood, and behavior.

Method

A comparison of published literature between these two groups.

Results

Both groups show similar hormonal and metabolic changes in response to caloric restriction and extreme weight loss (~25%). Associated changes result in a reduced body temperature (Tcore-low). Maintenance of body temperature within a specific range is crucial to survival. However, both groups cannot activate autonomic strategies to maintain their Tcore-low, such as increasing metabolic rate, constricting skin blood vessels, or shivering. Furthermore, Tcore-low increases the individuals' "coldness sensations" throughout the body, hence the frequent reports from ANs and SSs of "feeling cold." To eliminate these uncomfortable "coldness sensations" and, importantly, to maintain Tcore-low, ANs, and SSs "select" different thermoregulatory behavioral strategies. It is proposed that the primary differences between AN and SS, based on genetics, now manifest due to the "selection" of different thermo-regulatory behaviors. AN patients (ANs) "select" hyperactive behavior (HyAc), which increases internal metabolic heat and thus assists with maintaining Tcore-low; in harmony with hyperactive behavior is a lively mood. Also related to this elevated arousal pattern, ANs experience disrupted sleep. In contrast, SS individuals "select" a passive thermo-behavioral strategy, "shallow torpor," which includes reduced activity, resulting in energy conservation. In addition, this inactivity aids in the retention of generated metabolic heat. Corresponding to this lethargic behavior, SS individuals display a listless mood and increased sleep.

Conclusion

Initial similarities between the two are attributable to physiological changes related to extreme weight loss. Differences are most likely attributable to genetically programmed "selection" of alternate thermoregulatory strategies, primarily to maintain Tcore-low. However, if acute AN is prolonged and evolves into a chronic condition, AN will more closely align with starvation and more precisely reflect SS symptomology.

Gastrointestinal Transit Times in Health as Determined Using Ingestible Capsule Systems: A Systematic Review

BACKGROUND

Ingestible capsule (IC) systems can assess gastrointestinal (GI) transit times as a surrogate for gut motility for extended periods of time within a minimally invasive, radiation-free and ambulatory setting.

METHODS

A literature review of IC systems and a systematic review of studies utilizing IC systems to measure GI transit times in healthy volunteers was performed. Screening for eligible studies, data extraction and bias assessments was performed by two reviewers. A narrative synthesis of the results was performed.

RESULTS

The literature review identified 23 different IC systems. The systematic review found 6892 records, of which 22 studies were eligible. GI transit time data were available from a total of 1885 healthy volunteers. Overall, seventeen included studies reported gastric emptying time (GET) and small intestinal transit time (SITT). Colonic transit time (CTT) was reported in nine studies and whole gut transit time (WGTT) was reported in eleven studies. GI transit times in the included studies ranged between 0.4 and 15.3 h for GET, 3.3-7 h for SITT, 15.9-28.9 h for CTT and 23.0-37.4 h for WGTT. GI transit times, notably GET, were influenced by the study protocol.

CONCLUSIONS

This review provides an up-to-date overview of IC systems and reference ranges for GI transit times. It also highlights the need to standardise protocols to differentiate between normal and pathological function.

Development of a Core Body Thermometer Applicable for High-Temperature Environment Based on the Zero-Heat-Flux Method

Monitoring core body temperature (CBT) allows observation of heat stress and thermal comfort in various environments. By introducing a Peltier element, we improved the zero-heat-flux core body thermometer for hot environments. In this study, we performed a theoretical analysis, designed a prototype probe, and evaluated its performance through simulator experiments with human subjects. The finite element analysis shows that our design can reduce the influence of external temperature variations by as much as 1%. In the simulator experiment, the prototype probe could measure deep temperatures within an error of less than 0.1 °C, regardless of outside temperature change. In the ergometer experiment with four subjects, the average difference between the prototype probe and a commercial zero-heat-flux probe was +0.1 °C, with a 95% LOA of -0.23 °C to +0.21 °C. In the dome sauna test, the results measured in six of the seven subjects exhibited the same trend as the reference temperature. These results show that the newly developed probe with the Peltier module can measure CBT accurately, even when the ambient temperature is higher than CBT up to 42 °C.

Graphene-Enhanced Polydimethylsiloxane Patch for Wearable Body Temperature Remote Monitoring Application

In this work, we designed and implemented a wearable body temperature monitoring device, which was constructed by a graphene-enhanced polydimethylsiloxane patch and a temperature measurement chip. The body temperature patch adopts a completely flexible solution in combination with near field communication component, which provides the advantages of passive wireless, overall flexibility, and being comfortable to wear. The whole device can be bent and stretched in conformal contact with skin. In order to improve the temperature conduction ability of the patch and make the patch data more accurate, we adopted graphene nanoplates to improve the thermal conductivity of polydimethylsiloxane patch with a significant thermal conductivity increase of 23.8%. With the combination of hollow sandwich structure and small dimension. it will reduce the uncomfortable situation of wearing the device for extended periods and can be served to monitor the human body temperature for a long time. Ultimately, this device is combined with a reading software for analyzing and processing on a smart mobile terminal. The real-time and past temperature range can be a pre-warning; meanwhile, the historical data can be traced and analyzed. Therefore, this device can be utilized in multiple human body temperature measurement scenarios and complex public health situations.

A self-powered ingestible wireless biosensing system for real-time in situ monitoring of gastrointestinal tract metabolites

Information related to the diverse and dynamic metabolite composition of the small intestine is crucial for the diagnosis and treatment of various diseases. However, our current understanding of the physiochemical dynamics of metabolic processes within the small intestine is limited due to the lack of in situ access to the intestinal environment. Here, we report a demonstration of a battery-free ingestible biosensing system for monitoring metabolites in the small intestine. As a proof of concept, we monitor the intestinal glucose dynamics on a porcine model. Battery-free operation is achieved through a self-powered glucose biofuel cell/biosensor integrated into a circuit that performs energy harvesting, biosensing, and wireless telemetry via a power-to-frequency conversion scheme using magnetic human body communication. Such long-term biochemical analysis could potentially provide critical information regarding the complex and dynamic small intestine metabolic profiles.

Association between lower body temperature and increased tau pathology in cognitively normal older adults

BACKGROUND

Preclinical studies suggest body temperature (Tb) and consequently brain temperature has the potential to bidirectionally interact with tau pathology in Alzheimer's Disease (AD). Tau phosphorylation is substantially increased by a small (<1 °C) decrease in temperature within the human physiological range, and thermoregulatory nuclei are affected by tau pathology early in the AD continuum. In this study we evaluated whether Tb (as a proxy for brain temperature) is cross-sectionally associated with clinically utilized markers of tau pathology in cognitively normal older adults.

METHODS

Tb was continuously measured with ingestible telemetry sensors for 48 h. This period included two nights of nocturnal polysomnography to delineate whether Tb during waking vs sleep is differentially associated with tau pathology. Tau phosphorylation was assessed with plasma and cerebrospinal fluid (CSF) tau phosphorylated at threonine 181 (P-tau), sampled the day following Tb measurement. In addition, neurofibrillary tangle (NFT) burden in early Braak stage regions was imaged with PET-MR using the [18F]MK-6240 radiotracer on average one month later.

RESULTS

Lower Tb was associated with increased NFT burden, as well as increased plasma and CSF P-tau levels (p < 0.05). NFT burden was associated with lower Tb during waking (p < 0.05) but not during sleep intervals. Plasma and CSF P-tau levels were highly correlated with each other (p < 0.05), and both variables were correlated with tau tangle radiotracer uptake (p < 0.05).

CONCLUSIONS

These results, the first available for human, suggest that lower Tb in older adults may be associated with increased tau pathology. Our findings add to the substantial preclinical literature associating lower body and brain temperature with tau hyperphosphorylation.

CLINICAL TRIAL NUMBER

NCT03053908.

Soft Wireless Bioelectronics Designed for Real-Time, Continuous Health Monitoring of Farmworkers

Hotter summers caused by global warming and increased workload and duration are endangering the health of farmworkers, a high-risk population for heat-related illness (HRI), and deaths. Although prior studies using wearable sensors show the feasibility of employing field-collected data for HRI monitoring, existing devices still have limitations, such as data loss from motion artifacts, device discomfort from rigid electronics, difficulties with administering ingestible sensors, and low temporal resolution. Here, this paper introduces a wireless, wearable bioelectronic system with functionalities for continuous monitoring of skin temperature, electrocardiograms (ECG), heart rates (HR), and activities, configured in a single integrated package. Advanced nanomanufacturing based on laser machining allows rapid device fabrication and direct incorporation of sensors with a highly breathable substrate, allowing for managing excessive sweating and multimodal stresses. To validate the device's performance in agricultural settings, the device is applied to multiple farmworkers at various operations, including fernery, nursery, and crop. The accurate data recording, including high-fidelity ECG (signal-to-noise ratio: >20 dB), accurate HR (r = 0.89, r² = 0.65 in linear correlation), and reliable temperature/activity, confirms the device's capability for multiparameter health monitoring of farmworkers.

Advanced sensor technologies and the future of work

Exposure science is fundamental to the field of occupational safety and health. The measurement of worker exposures to hazardous agents informs effective workplace risk mitigation strategies. The modern era of occupational exposure measurement began with the invention of the personal sampling device, which is still widely used today in the practice of occupational hygiene. Newer direct-reading sensor devices are incorporating recent advances in transducers, nanomaterials, electronics miniaturization, portability, batteries with high-power density, wireless communication, energy-efficient microprocessing, and display technology to usher in a new era in exposure science. Commercial applications of new sensor technologies have led to a variety of health and lifestyle management devices for everyday life. These applications are also being investigated as tools to measure occupational and environmental exposures. As the next-generation placeable, wearable, and implantable sensor technologies move from the research laboratory to the workplace, their role in the future of work will be of increasing importance to employers, workers, and occupational safety and health researchers and practitioners. This commentary discusses some of the benefits and challenges of placeable, wearable, and implantable sensor technologies in the future of work.

Noncontact Body Temperature Measurement: Uncertainty Evaluation and Screening Decision Rule to Prevent the Spread of COVID-19

The need to measure body temperature contactless and quickly during the COVID-19 pandemic emergency has led to the widespread use of infrared thermometers, thermal imaging cameras and thermal scanners as an alternative to the traditional contact clinical thermometers. However, limits and issues of noncontact temperature measurement devices are not well known and technical–scientific literature itself sometimes provides conflicting reference values on the body and skin temperature of healthy subjects. To limit the risk of contagion, national authorities have set the obligation to measure body temperature of workers at the entrance to the workplace. In this paper, the authors analyze noncontact body temperature measurement issues from both clinical and metrological points of view with the aim to (i) improve body temperature measurements accuracy; (ii) estimate the uncertainty of body temperature measurement on the field; (iii) propose a screening decision rule for the prevention of the spread of COVID-19. The approach adopted in this paper takes into account both the traditional instrumental uncertainty sources and clinical–medical ones related to the subjectivity of the measurand. A proper screening protocol for body temperature measurement considering the role of uncertainty is essential to correctly choose the threshold temperature value and measurement method to access critical places during COVID-19 pandemic emergency.

Wearable technologies for developing sleep and circadian biomarkers: a summary of workshop discussions

The "International Biomarkers Workshop on Wearables in Sleep and Circadian Science" was held at the 2018 SLEEP Meeting of the Associated Professional Sleep Societies. The workshop brought together experts in consumer sleep technologies and medical devices, sleep and circadian physiology, clinical translational research, and clinical practice. The goals of the workshop were: (1) characterize the term "wearable" for use in sleep and circadian science and identify relevant sleep and circadian metrics for wearables to measure; (2) assess the current use of wearables in sleep and circadian science; (3) identify current barriers for applying wearables to sleep and circadian science; and (4) identify goals and opportunities for wearables to advance sleep and circadian science. For the purposes of biomarker development in the sleep and circadian fields, the workshop included the terms "wearables," "nearables," and "ingestibles." Given the state of the current science and technology, the limited validation of wearable devices against gold standard measurements is the primary factor limiting large-scale use of wearable technologies for sleep and circadian research. As such, the workshop committee proposed a set of best practices for validation studies and guidelines regarding how to choose a wearable device for research and clinical use. To complement validation studies, the workshop committee recommends the development of a public data repository for wearable data. Finally, sleep and circadian scientists must actively engage in the development and use of wearable devices to maintain the rigor of scientific findings and public health messages based on wearable technology.

Low 24-hour core body temperature as a thrifty metabolic trait driving catch-up fat during weight regain after caloric restriction

The recovery of body weight after substantial weight loss or growth retardation is often characterized by a disproportionately higher rate of fat mass vs. lean mass recovery, with this phenomenon of "preferential catch-up fat" being contributed by energy conservation (thrifty) metabolism. To test the hypothesis that a low core body temperature (T_c) constitutes a thrifty metabolic trait underlying the high metabolic efficiency driving catch-up fat, the Anipill system, with telemetry capsules implanted in the peritoneal cavity, was used for continuous monitoring of T_c for several weeks in a validated rat model of semistarvation-refeeding in which catch-up fat is driven solely by suppressed thermogenesis. In animals housed at 22°C, 24-h T_c was reduced in response to semistarvation (-0.77°C, P < 0.001) and remained significantly lower than in control animals during the catch-up fat phase of refeeding (-0.27°C on average, P < 0.001), the lower T_c during refeeding being more pronounced during the light phase than during the dark phase of the 24-h cycle (-0.30°C vs. -0.23°C, P < 0.01) and with no between-group differences in locomotor activity. A lower 24-h T_c in animals showing catch-up fat was also observed when the housing temperature was raised to 29°C (i.e., at thermoneutrality). The reduced energy cost of homeothermy in response to caloric restriction persists during weight recovery and constitutes a thrifty metabolic trait that contributes to the high metabolic efficiency that underlies the rapid restoration of the body's fat stores during weight regain, with implications for obesity relapse after therapeutic slimming and the pathophysiology of catch-up growth.

Persistent low body weight in humans is associated with higher mitochondrial activity in white adipose tissue

BACKGROUND

Constitutional thinness (CT) is a state of low but stable body weight (BMI ≤18 kg/m2). CT subjects have normal-range hormonal profiles and food intake but exhibit resistance to weight gain despite living in the modern world's obesogenic environment.

OBJECTIVE

The goal of this study is to identify molecular mechanisms underlying this protective phenotype against weight gain.

METHODS

We conducted a clinical overfeeding study on 30 CT subjects and 30 controls (BMI 20-25 kg/m2) matched for age and sex. We performed clinical and integrative molecular and transcriptomic analyses on white adipose and muscle tissues.

RESULTS

Our results demonstrate that adipocytes were markedly smaller in CT individuals (mean ± SEM: 2174 ± 142 μm 2) compared with controls (3586 ± 216 μm2) (P < 0.01). The mitochondrial respiratory capacity was higher in CT adipose tissue, particularly at the level of complex II of the electron transport chain (2.2-fold increase; P < 0.01). This higher activity was paralleled by an increase in mitochondrial number (CT compared with control: 784 ± 27 compared with 675 ± 30 mitochondrial DNA molecules per cell; P < 0.05). No evidence for uncoupled respiration or "browning" of the white adipose tissue was found. In accordance with the mitochondrial differences, CT subjects had a distinct adipose transcriptomic profile [62 differentially expressed genes (false discovery rate of 0.1 and log fold change >0.75)], with many differentially expressed genes associating with positive metabolic outcomes. Pathway analyses revealed an increase in fatty acid oxidation ( P = 3 × 10-04) but also triglyceride biosynthesis (P = 3.6 × 10-04). No differential response to the overfeeding was observed in the 2 groups.

CONCLUSIONS

The distinct molecular signature of the adipose tissue in CT individuals suggests the presence of augm ented futile lipid cycling, rather than mitochondrial uncoupling, as a way to increase energy expenditure in CT individuals. We propose that increased mitochondrial function in adipose tissue is an important mediator in sustaining the low body weight in CT individuals. This knowledge could ultimately allow more targeted approaches for weight management treatment strategies. This trial was registered at clinicaltrials.gov as NCT02004821.

Thermometry and interpretation of body temperature

This article reviews the historical development and up-to-date state of thermometric technologies for measuring human body temperature (BT) from two aspects: measurement methodology and significance interpretation. Since the first systematic and comprehensive study on BT and its relation to human diseases was conducted by Wunderlich in the late 19th century, BT has served as one of the most fundamental vital signs for clinical diagnosis and daily healthcare. The physiological implication of BT set point and thermoregulatory mechanisms are briefly outlined. Influential determinants of BT measurement are investigated thoroughly. Three types of BT measurement, i.e., core body temperature, surface body temperature and basal body temperature, are categorized according to its measurement position and activity level. With the comparison of temperature measurement in industrial fields, specialties in technological and biological aspects in BT measurement are mentioned. Methodologies used in BT measurement are grouped into instrumental methods and mathematical methods. Instrumental methods utilize results of BT measurements directly from temperature-sensitive transducers and electronic instrumentations by the combination of actual and predictive measurement, invasive and noninvasive measurement. Mathematical methods use several numerical models, such as multiple regression model, autoregressive model, thermoregulatory mechanism-based model and the Kalman filter-based method to estimate BT indirectly from some relevant vital signs and environmental factors. Thermometry modalities are summarized on the dichotomies into invasive and noninvasive, contact and noncontact, direct and indirect, free and restrained, 1-D and n-D. Comprehensive interpretation of BT has an equal importance as the measurement of BT. Two modes to apply BT are classified into real-time applications and long-term applications. With rapid advancement in IoT infrastructure, big data analytics and AI platforms, prospects for future development in thermometry and interpretation of BT are discussed.

Physical Wellbeing Monitoring Employing Non-Invasive Low-Cost and Low-Energy Sensor Socks

Determining and improving the wellbeing of people is one of the priorities of the OECD countries. Nowadays many sensors allow monitoring different parameters in regard to the wellbeing of people. These sensors can be deployed in smartphones, clothes or accessories like watches. Many studies have been performed on wearable devices that monitor certain aspects of the health of people, especially for specific diseases. In this paper, we propose a non-invasive low-cost and low-energy physical wellbeing monitoring system that provides a wellness score based on the obtained data. We present the architecture of the system and the disposition of the sensors on the sock. The algorithm of the system is presented as well. The wellness threshold evaluation module allows determining if the monitored parameter is within healthy ranges. The message forwarding module allows decreasing the energy consumption of the system by detecting the presence of alerts or changes in the data. Finally, a simulation was performed in order to determine the energy consumption of the system. Results show that our algorithm allows saving 44.9% of the initial energy in 10,000 min for healthy people.

Relevance of a Mobile Internet Platform for Capturing Inter- and Intrasubject Variabilities in Circadian Coordination During Daily Routine: Pilot Study

Background

Experimental and epidemiologic studies have shown that circadian clocks’ disruption can play an important role in the development of cancer and metabolic diseases. The cellular clocks outside the brain are effectively coordinated by the body temperature rhythm. We hypothesized that concurrent measurements of body temperature and rest-activity rhythms would assess circadian clocks coordination in individual patients, thus enabling the integration of biological rhythms into precision medicine.

Objective

The objective was to evaluate the circadian clocks’ coordination in healthy subjects and patients through simultaneous measurements of rest-activity and body temperature rhythms.

Methods

Noninvasive real-time measurements of rest-activity and chest temperature rhythms were recorded during the subject’s daily life, using a dedicated new mobile electronic health platform (PiCADo). It involved a chest sensor that jointly measured accelerations, 3D orientation, and skin surface temperature every 1-5 min and relayed them out to a mobile gateway via Bluetooth Low Energy. The gateway tele-transmitted all stored data to a server via General Packet Radio Service every 24 hours. The technical capabilities of PiCADo were validated in 55 healthy subjects and 12 cancer patients, whose rhythms were e-monitored during their daily routine for 3-30 days. Spectral analyses enabled to compute rhythm parameters values, with their 90% confidence limits, and their dynamics in each subject.

Results

All the individuals displayed a dominant circadian rhythm in activity with maxima occurring from 12:09 to 20:25. This was not the case for the dominant temperature period, which clustered around 24 hours for 51 out of 67 subjects (76%), and around 12 hours for 13 others (19%). Statistically significant sex- and age-related differences in circadian coordination were identified in the noncancerous subjects, based upon the range of variations in temperature rhythm amplitudes, maxima (acrophases), and phase relations with rest-activity. The circadian acrophase of chest temperature was located at night for the majority of people, but it occurred at daytime for 26% (14/55) of the noncancerous people and 33% (4/12) of the cancer patients, thus supporting important intersubject differences in circadian coordination. Sex, age, and cancer significantly impacted the circadian coordination of both rhythms, based on their phase relationships.

Conclusions

Complementing rest-activity with chest temperature circadian e-monitoring revealed striking intersubject differences regarding human circadian clocks’ coordination and timing during daily routine. To further delineate the clinical importance of such finding, the PiCADo platform is currently applied for both the assessment of health effects resulting from atypical work schedules and the identification of the key determinants of circadian disruption in cancer patients.